From 713e06bf6c420f543b75dc47491c176f1e55167a Mon Sep 17 00:00:00 2001
From: janek <janek.janek@gmail.com>
Date: Fri, 14 Mar 2025 22:43:58 +0100
Subject: [PATCH] cleanup, proper name

---
 CMakeLists.txt |  2 +-
 stlink.cfg     | 16 ---------
 stm32f0x.cfg   | 95 --------------------------------------------------
 3 files changed, 1 insertion(+), 112 deletions(-)
 delete mode 100644 stlink.cfg
 delete mode 100644 stm32f0x.cfg

diff --git a/CMakeLists.txt b/CMakeLists.txt
index 8e1ef3873..43283a34a 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -43,7 +43,7 @@ today(DATE)
 now(TIME)
 git_id(GIT_STR)
 
-message(STATUS "OpenTX ${VERSION} @${GIT_STR}")
+message(STATUS "OpenI6X ${VERSION} @${GIT_STR}")
 
 # options shared by all targets
 
diff --git a/stlink.cfg b/stlink.cfg
deleted file mode 100644
index 54cd63eb6..000000000
--- a/stlink.cfg
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# STMicroelectronics ST-LINK/V1, ST-LINK/V2, ST-LINK/V2-1, STLINK-V3 in-circuit
-# debugger/programmer
-#
-
-adapter driver hla
-hla_layout stlink
-hla_device_desc "ST-LINK"
-hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753
-
-# Optionally specify the serial number of ST-LINK/V2 usb device.  ST-LINK/V2
-# devices seem to have serial numbers with unreadable characters.  ST-LINK/V2
-# firmware version >= V2.J21.S4 recommended to avoid issues with adapter serial
-# number reset issues.
-# eg.
-#hla_serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"
diff --git a/stm32f0x.cfg b/stm32f0x.cfg
deleted file mode 100644
index b20d036cf..000000000
--- a/stm32f0x.cfg
+++ /dev/null
@@ -1,95 +0,0 @@
-# script for stm32f0x family
-
-#
-# stm32 devices support SWD transports only.
-#
-source [find target/swj-dp.tcl]
-source [find mem_helper.tcl]
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME stm32f0x
-}
-
-set _ENDIAN little
-
-# Work-area is a space in RAM used for flash programming
-# By default use 4kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x1000
-}
-
-# Allow overriding the Flash bank size
-if { [info exists FLASH_SIZE] } {
-	set _FLASH_SIZE $FLASH_SIZE
-} else {
-	# autodetect size
-	set _FLASH_SIZE 0
-}
-
-#jtag scan chain
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-  # See STM Document RM0091
-  # Section 29.5.3
-   set _CPUTAPID 0x0bb11477
-}
-
-swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-# flash size will be probed
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32f1x 0x08000000 $_FLASH_SIZE 0 0 $_TARGETNAME
-
-# adapter speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
-adapter speed 1000
-
-adapter srst delay 100
-
-reset_config srst_nogate
-
-if {![using_hla]} {
-   # if srst is not fitted use SYSRESETREQ to
-   # perform a soft reset
-   cortex_m reset_config sysresetreq
-}
-
-proc stm32f0x_default_reset_start {} {
-	# Reset clock is HSI (8 MHz)
-	adapter speed 1000
-}
-
-proc stm32f0x_default_examine_end {} {
-	# Enable debug during low power modes (uses more power)
-	mmw 0x40015804 0x00000006 0 ;# DBGMCU_CR |= DBG_STANDBY | DBG_STOP
-
-	# Stop watchdog counters during halt
-	mmw 0x40015808 0x00001800 0 ;# DBGMCU_APB1_FZ |= DBG_IWDG_STOP | DBG_WWDG_STOP
-}
-
-proc stm32f0x_default_reset_init {} {
-	# Configure PLL to boost clock to HSI x 6 (48 MHz)
-	mww 0x40021004 0x00100000   ;# RCC_CFGR = PLLMUL[2]
-	mmw 0x40021000 0x01000000 0 ;# RCC_CR[31:16] |= PLLON
-	mww 0x40022000 0x00000011   ;# FLASH_ACR = PRFTBE | LATENCY[0]
-	sleep 10                    ;# Wait for PLL to lock
-	mmw 0x40021004 0x00000002 0 ;# RCC_CFGR |= SW[1]
-
-	# Boost JTAG frequency
-	adapter speed 8000
-}
-
-# Default hooks
-$_TARGETNAME configure -event examine-end { stm32f0x_default_examine_end }
-$_TARGETNAME configure -event reset-start { stm32f0x_default_reset_start }
-$_TARGETNAME configure -event reset-init { stm32f0x_default_reset_init }