Commit Graph

41 Commits

Author SHA1 Message Date
bsongis c9ea8172d6 Slider for beep length and haptic length. Thanks dvogonen for the idea and the screenshot! 2012-05-16 15:16:52 +00:00
bsongis 57e237019d THR Warn bug fixed. 2012-05-11 19:21:27 +00:00
bsongis f7f2a51605 Idea from Kilrah. To be discussed. For AutoSwitch is not bad. 2012-05-07 19:19:20 +00:00
mihlit@mihlit.cz 4095ae2af9 rotary encoder used in menu did not keep light on 2012-05-07 11:30:07 +00:00
bsongis 80fa36029f Auto Switch function (only in Flight Phases now) 2012-05-06 21:41:41 +00:00
bsongis 9b7c23ebb9 SD card Models storage now complete, including scroll in Models List! 2012-04-21 17:50:47 +00:00
bsongis a78bf73ffd Bug in Rotary Encoders navigation (when choosing the Rotary Encoder with the Rotary Encoder ...) 2012-04-21 14:08:12 +00:00
bsongis 09b4510035 400bytes flash saved in GeneralMenus + ModelMenus
On V4.1 board both Rotary Encoder may be used for navigation
TX/RX RSSI set to 0 when no telemetry received since too long
2012-04-20 17:03:16 +00:00
bsongis 41a02606e8 Option UNITS=IMPERIAL added
SD card archive function continued (doesn't delete the model until function finished)
Alternate view for outputs in Main Views (Bars and Numbers)
GPS speed was badly displayed (ap instead of bp)
2012-04-19 17:03:51 +00:00
bsongis 3a949d8c7f Makefile option renamed (EXTRA_ROTARY_ENCODERS)
Fixed a bug with option EXTRA_ROTARY_ENCODERS: mixes shifted after REb
30 models when open9x / gruvin9x board
LIMITS min and max range fixed
2012-04-15 22:34:39 +00:00
bsongis afe8235bf8 Issue 19 solved
Revert the last Haptic changes (was unfinished, no more spare time during the week-end, sorry!)
Revert my last modification on main views (offset not displayed in Bar Graphs, I was wrong)
PPM Center now configurable for each servo
No mean on the Batt voltage when in the calibration menu to have a faster response when calibrating
SD card Backup / Restore Models feature started
Some french translations fixed
2012-04-14 11:32:40 +00:00
bsongis 7f05f8e430 Bug in Mixer when offset used with a switch + slow down
GPS displayed as ---- when there has no fixed received since beginning
No Custom telemetry screen displayed when nothing to display
Marks at -100 and +100 when editing a value
RSSI alarms 1 + 2 labels were wrong
ANAS menu redesigned
60 models on ersky9x board
Current calibration on ersky9x board
2012-04-10 18:20:51 +00:00
bsongis a9468f0e4a Soft Power Switch on both v4.1 and ersky9x boards
Delay before effective EEPROM write on these boards
Current displayed
2012-03-30 16:03:43 +00:00
bsongis 7eb117b0d7 Refactoring 2012-03-22 14:22:57 +00:00
bsongis c26121cfe5 Vario (still untested). Flash savings. 2012-03-20 18:48:05 +00:00
bsongis 1b7082ade2 New EEPROM format 205
Introduction of differential in Mixers
Introduction of Switches as Mixer Source (FULL now removed)
Negative curves in Mixers
Optimizations in Mixer
Extended chars for localization
Swedish translations
Beep length updated
2012-03-04 17:25:35 +00:00
bsongis e910415cc1 Flash saving (idea from er9x)
Trims2Offsets function removed as it was as full of bugs than other firmwares (total = ~1000bytes flash saved)
A "Safety CHxx" function is not applied when it is currently edited
The Stick Mode needs confirmation before being used (now edited with [MENU] edit [MENU]).
2012-02-27 18:52:29 +00:00
bsongis b6b19fdaa1 Pat Mackenzie added to the coders list as suggested by Mike in 9xforums 2012-02-27 07:33:11 +00:00
bsongis 4e687cdd29 Some new fields now inflight modifiable: DR/EXPOS expo / weight, MIXER weight / offset 2012-02-22 17:56:38 +00:00
bsongis 473d2b8c68 Bug when editing phase names with Rotary Encoder 2012-02-21 21:47:46 +00:00
bsongis 42cfda27d3 Inflight parameters modification.
Last Telemetry parameters still displayed even if NO DATA (after something has been received)
2012-02-19 23:08:01 +00:00
bsongis 61b380beea Inflight parameters modification using Rotary Encoder on v4 (not finished yet). 2012-02-18 08:58:05 +00:00
romolo.manfredini@gmail.com 3e49b1d254 Fix compilation problems 2012-02-17 18:47:55 +00:00
bsongis 81167a8760 Another 100bytes flash saved + 16bytes RAM in LIMITS menu. 2012-02-17 18:12:01 +00:00
bsongis c8fa6e9901 A little commit between two snow balls fight to warm the hands: this is the way that Cam proposed to exit submenus with Rotary Encoders. Still remaining: the Curve submenu. Ideas needed ;) 2012-02-17 15:11:02 +00:00
bsongis f2aa5c7954 Compilation problem when !FRSKY
Rotary encoder navigation on v4
Some cleaning on code
2012-02-16 22:40:02 +00:00
bsongis 54a38232a8 Copyright notice updated 2012-02-10 16:33:08 +00:00
mihlit@mihlit.cz 2caa639c2d make code compatible with up-to-date build environment
These changes make it possible to compile open9x with old (avr-gcc 4.3.3, 
avr-libc 1.6.7) and up-to-date (avr-gcc 4.6.2, avr-libc 1.8.0) build
environments. See Issue 1 for more details.
2012-02-02 11:23:38 +00:00
bsongis bb5f6d2cc8 NMEA and ARDUPILOT code ported from er9x
DSM2(PPM) bug fixed
Flash saving
PCBV3 removed
One delay_us(7) removed
BEEPSPKR becomes AUDIO
2012-01-27 18:58:59 +00:00
bsongis a982d4a599 Audio port from er9x (thanks Rob!) 2012-01-26 20:15:45 +00:00
bsongis b9549c5e64 Some rename to open9x 2012-01-18 21:39:45 +00:00
bsongis 9e41f6501f open9x translations 2012-01-18 20:24:15 +00:00
bsongis e2830034b8 Translations mechanism 2012-01-17 18:12:18 +00:00
bsongis b52610beb9 Simu for V4. First draft of rotary encoders use in menus 2011-12-03 16:40:36 +00:00
bsongis c3d97f28e6 Progress circle in all menus 2011-11-26 22:30:00 +00:00
bsongis 4913ffae49 EEPROM async write bug solved. Progress bar. Popup on MODELSEL. Simu EEPROM async write. 2011-11-26 12:55:00 +00:00
bsongis fa047f2e1a Last changes to gruvin9x 2011-11-17 21:35:33 +00:00
bsongis 29847e7cc3 Calibration screen. Bugs and optimizations. 2011-10-13 18:23:01 +00:00
bsongis 36744aca3c popMenu is always called without argument 2011-10-03 06:52:11 +00:00
bsongis 887893e22a Backup before 10bits trims function merge (instead of 8bits + subtrims) 2011-09-14 12:54:57 +00:00
bsongis 11a7b11837 Backup before extended trims function merge 2011-09-13 18:11:01 +00:00