1139da8f42
German font extra chars added
2012-05-17 14:48:20 +00:00
c9ea8172d6
Slider for beep length and haptic length. Thanks dvogonen for the idea and the screenshot!
2012-05-16 15:16:52 +00:00
3d5640b716
Left Vertical Trim Slider now aligned left
...
Scrollbar on the Outputs Main Screen
4 screens for Outputs Main Screen on ARM board
Virtual Switches Main Screen redesigned
Saves 200bytes flash on stock board!
2012-05-14 10:21:17 +00:00
879331c300
Italian translation (WIP)
2012-05-14 09:50:58 +00:00
51e9383df9
Italian translations (to be finished)
2012-05-13 22:56:52 +00:00
a403271769
TODOs removed
2012-05-08 13:24:26 +00:00
918cfcf726
SD-card more options
2012-05-03 18:23:37 +00:00
3f0f5537c2
Some Haptic corrections
2012-05-03 17:19:06 +00:00
920a48a0be
Vario. Port from unstable branch. Part 1.
2012-04-27 15:36:17 +00:00
1bffca5d21
r632 continued. Still needs tests.
2012-04-27 08:12:56 +00:00
09b4510035
400bytes flash saved in GeneralMenus + ModelMenus
...
On V4.1 board both Rotary Encoder may be used for navigation
TX/RX RSSI set to 0 when no telemetry received since too long
2012-04-20 17:03:16 +00:00
c900dff7c1
Small corrections
2012-04-20 06:16:22 +00:00
73971a232c
Massive revert of the trunk to return to the last known stable version. I would like a new release soon.
2012-04-18 08:24:33 +00:00
efb486a463
Small flash saving in General Menus (60bytes)
...
Backlight brightness now supported on ARM
SD card archive function continued
Simu backlight support for v4
2012-04-18 06:00:03 +00:00
d97e6e3e45
now it compiles as rev 556
...
new option in code VARIO_EXTENDED
2012-04-17 20:02:31 +00:00
003a1e0964
Barometric Vario function changed
...
new menu items added to handle new function
sound function changed for Vario
sound driver changed to remove crisps on continues sound
frsky data structure changed to fit new variables, some spares reused
2012-04-17 16:08:54 +00:00
344bd206f5
Revert last 2 commits
2012-04-16 18:56:34 +00:00
61fc1a4527
barometric Vario function changed
...
new menu items added to handle new function
sound function changed for Vario
frsky data structure changed to fit new variables, some spares reused
2012-04-16 18:15:08 +00:00
42913ae7f0
Haptic function by Rob should now be finished. SD card Model archive function.
2012-04-16 17:35:54 +00:00
afe8235bf8
Issue 19 solved
...
Revert the last Haptic changes (was unfinished, no more spare time during the week-end, sorry!)
Revert my last modification on main views (offset not displayed in Bar Graphs, I was wrong)
PPM Center now configurable for each servo
No mean on the Batt voltage when in the calibration menu to have a faster response when calibrating
SD card Backup / Restore Models feature started
Some french translations fixed
2012-04-14 11:32:40 +00:00
c8837b2e64
General menu fixup
2012-04-13 20:46:10 +00:00
9953d47b76
Batt calib on all boards ...
2012-04-10 18:56:30 +00:00
7f05f8e430
Bug in Mixer when offset used with a switch + slow down
...
GPS displayed as ---- when there has no fixed received since beginning
No Custom telemetry screen displayed when nothing to display
Marks at -100 and +100 when editing a value
RSSI alarms 1 + 2 labels were wrong
ANAS menu redesigned
60 models on ersky9x board
Current calibration on ersky9x board
2012-04-10 18:20:51 +00:00
a9468f0e4a
Soft Power Switch on both v4.1 and ersky9x boards
...
Delay before effective EEPROM write on these boards
Current displayed
2012-03-30 16:03:43 +00:00
37a15ae8c6
Trims to Offsets re-implemented (still untested)
...
FrSky flash saving
2012-03-27 17:56:43 +00:00
ab92de64b1
Support for different GPS coordinates
2012-03-27 15:15:43 +00:00
aa943050e1
Small code adjutments
2012-03-19 21:11:29 +00:00
c859c21abf
Telemetry Screens again!
2012-03-18 22:36:11 +00:00
a60894f7ff
Correct maximums for Gauges
...
Flash saving
2012-03-16 19:16:39 +00:00
7041763cb6
Bad alignement in the last Telemetry screen
2012-03-16 18:24:04 +00:00
d9ad4b7f83
More fields displayed in Custom Telemetry Screen
...
Vario Function Switch (first part)
2012-03-16 17:56:44 +00:00
8ad9bbe8af
Custom Telemetry View
...
FAAST protocol (start pulses before the splash)
Templates Confirmation
Used channels cleaned before applying a template
2012-03-15 18:37:18 +00:00
2955fc72fb
Fix for slow / delayed mixes
...
Telemetry screens redesigned
2012-03-09 21:11:54 +00:00
ce396397e6
New "Test" function switch (make DEBUG=YES)
...
New "Reset" function switch
TimeZone for GPS
BLINK attribute may be used without INVERS
Wrong first frame sent when DSM2=SERIAL (by Cam)
Text in status line blinking when NO DATA on FrSky telemetry screen
2012-03-08 18:44:48 +00:00
1b7082ade2
New EEPROM format 205
...
Introduction of differential in Mixers
Introduction of Switches as Mixer Source (FULL now removed)
Negative curves in Mixers
Optimizations in Mixer
Extended chars for localization
Swedish translations
Beep length updated
2012-03-04 17:25:35 +00:00
e910415cc1
Flash saving (idea from er9x)
...
Trims2Offsets function removed as it was as full of bugs than other firmwares (total = ~1000bytes flash saved)
A "Safety CHxx" function is not applied when it is currently edited
The Stick Mode needs confirmation before being used (now edited with [MENU] edit [MENU]).
2012-02-27 18:52:29 +00:00
b6b19fdaa1
Pat Mackenzie added to the coders list as suggested by Mike in 9xforums
2012-02-27 07:33:11 +00:00
4e687cdd29
Some new fields now inflight modifiable: DR/EXPOS expo / weight, MIXER weight / offset
2012-02-22 17:56:38 +00:00
61b380beea
Inflight parameters modification using Rotary Encoder on v4 (not finished yet).
2012-02-18 08:58:05 +00:00
c8fa6e9901
A little commit between two snow balls fight to warm the hands: this is the way that Cam proposed to exit submenus with Rotary Encoders. Still remaining: the Curve submenu. Ideas needed ;)
2012-02-17 15:11:02 +00:00
f2aa5c7954
Compilation problem when !FRSKY
...
Rotary encoder navigation on v4
Some cleaning on code
2012-02-16 22:40:02 +00:00
6e65b6db9e
RSSI alarms are now stored in ModelData. Alarms disabled on Quiet mode, re-enabled when not Quiet mode.
2012-02-16 17:55:23 +00:00
192218ddb4
Beeper mode is now splitted from beeper length. Haptic mode added. Haptic only sounds now ok on v4.
2012-02-16 13:12:35 +00:00
6816a19962
Blades count for RPMs. Reordering of the TELEMETRY screen
2012-02-14 18:23:46 +00:00
54a38232a8
Copyright notice updated
2012-02-10 16:33:08 +00:00
08cc99d07d
GPS distance
2012-02-10 09:24:32 +00:00
67495df892
New telemetry screens (bars)
...
New telemetry units for A1 / A2
Update to pgmtypes according to Michal patch (suggested by gcc developers!)
EEPROM v204
2012-02-08 20:56:36 +00:00
6ddfa738d1
The second telemetry screen reworked
2012-02-05 22:19:17 +00:00
875f09acce
I change again my mind for telemetry: now Range and Offset. Audio sounds now have a name. Haptic sounds skipped when HAPTIC=NO
2012-02-04 17:34:25 +00:00
fd5fba093a
Display of Min/Max for telemetry instead of an amplitude and a Calib value
2012-02-04 13:03:50 +00:00
bsongis