Using AR_SREV_* macros for setting up the chip-specific NF
values will make adding support for new chips hard. Use separate
macros for each chip. Currently, AR9462 has the same value for
all NF limits.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Validate the phyerr value against the max. size of the
statistics array properly.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dumping the RSSI information in the middle of error
statistics is a bit misleading. Move them to the end.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch merges the 'wiphy' and 'misc' debugfs files
and consolidates the information.
Information about the current channel and other HT parameters
can be obtained from both mac80211 and iw. Remove such
redundant data.
The reset statistics have been removed, they will be re-added in
a subsequent patch (in a new debugfs file).
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Comparing SHA1 checksums of the initval tables has shown that there are many
tables that are 100% identical.
iniBank{0,1,2,3,7} and iniBB_RfGain are shared by AR5416, AR913x, AR9160
iniBank6 is shared between AR5416 and AR9160
iniBank6TPC is shared between AR913x and AR9160
iniPcieSerdes is the same for all AR9002 based devices
The CCK FIR coefficients are shared between AR9271 and AR9287
Getting rid of those duplicates saves about 7.5k uncompressed (on MIPS).
For AR9003 and later there are some duplicates as well, but I've decided to
leave them in for now, as the initvals for those chips are still actively
maintained by QCA.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The make_min_config does not take into account when the build fails,
resulting in a invalid MIN_CONFIG .config file. When the build fails,
it is ignored and the boot test is executed, using the previous built
kernel. The configs that should be tested are not tested and they may
be added or removed depending on the result of the last kernel that
succeeded to be built.
If the build fails, mark the current config as a failure and the
configs that were disabled may still be needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, wait queue, used for polling of RPC pipe changes from user-space,
is a part of RPC pipe. But the pipe data itself can be released on NFS umount
prior to dentry-inode pair, connected to it (is case of this pair is open by
some process).
This is not a problem for almost all pipe users, because all PipeFS file
operations checks pipe reference prior to using it.
Except evenfd. This thing registers itself with "poll" file operation and thus
has a reference to pipe wait queue. This leads to oopses on destroying eventfd
after NFS umount (like rpc_idmapd do) since not pipe data left to the point
already.
The solution is to wait queue from pipe data to internal RPC inode data. This
looks more logical, because this wiat queue used only for user-space processes,
which already holds inode reference.
Note: upcalls have to get pipe->dentry prior to dereferecing wait queue to make
sure, that mount point won't disappear from underneath us.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There are 2 tightly bound objects: pipe data (created for kernel needs, has
reference to dentry, which depends on PipeFS mount/umount) and PipeFS
dentry/inode pair (created on mount for user-space needs). They both
independently may have or have not a valid reference to each other.
This means, that we have to make sure, that pipe->dentry reference is valid on
upcalls, and dentry->pipe reference is valid on downcalls. The latter check is
absent - my fault.
IOW, PipeFS dentry can be opened by some process (rpc.idmapd for example), but
it's pipe data can belong to NFS mount, which was unmounted already and thus
pipe data was destroyed.
To fix this, pipe reference have to be set to NULL on rpc_unlink() and checked
on PipeFS file operations instead of pipe->dentry check.
Note: PipeFS "poll" file operation will be updated in next patch, because it's
logic is more complicated.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
v3:
1) Lookup for client is performed from the beginning of the list on each PipeFS
event handling operation.
Lockdep is sad otherwise, because inode mutex is taken on PipeFS dentry
creation, which can be called on mount notification, where this per-net client
lock is taken on clients list walk.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
v3:
1) Lookup for client is performed from the beginning of the list on each PipeFS
event handling operation.
Lockdep is sad otherwise, because inode mutex is taken on PipeFS dentry
creation, which can be called on mount notification, where this per-net client
lock is taken on clients list walk.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'lpc32xx/fixes-non-critical' of git://git.antcom.de/linux-2.6: (1 commit)
ARM: LPC32xx: Fix missing and bad LPC32XX macros
Update to Linux 3.3-rc5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove sysfs attributes before removing a target instead of testing
the target state in every sysfs attribute callback method. Note: it is
safe to invoke a sysfs attribute removal method like
device_remove_file() twice on the same attribute.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
In ath6kl_cfg80211_add_key(), params is checked for non-NULL
but this pointer has been deferenced many times before this check. This
gives the following smatch warning. add_key() can never carry NULL as
params, remove this bogus check.
ath6kl_cfg80211_add_key(86) warn: variable dereferenced before check 'params'
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Commit 71eeba16 ("IB: Add new InfiniBand link speeds") introduced a bug
where eg the rate for IB 4X SDR links iss displayed as "8.5 Gb/sec"
instead of "10 Gb/sec" as it used to be. Fix that.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Tx packets will begin to drop when there are multiple traffic priorities
and the current traffic is not the highest priority and the remaining
cookies drop below a certain number, which is fixed for all AC. It is
possilbe that lower priority AC have more traffic which will consume
more cookies and lock out higher priority AC from having any. Assign
each endpoint (AC) with a different Tx-packet-drop threshold so lower
priority AC is more likely to drop packets and the cookies become more
available to higher priority AC.
Signed-off-by: Chilam Ng <chilamng@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
gcc seems to get uber-anal recently about these things.
Clarification from Dan Carpenter:
"Sorry, I should have said that it's not a gcc warning, it's a smatch
thing. But also it's not uber-anal. It's the exact level of anality
which is required to make the == -1 test work. You can compare
unsigned int and longs to -1 and it works but for smaller types it
doesn't."
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This error message has since been superseded by the hangcheck, and does
not add any salient information beyond that already printed by hangcheck
discovering the GPU hang that lead to i915_wait_request() bombing out in
the first place.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is a revert of 6aa56062ea.
This was originally introduced to workaround reads of the ringbuffer
registers returning 0 on SandyBridge causing hangs due to ringbuffer
overflow. The root cause here was reads through the GT powerwell require
the forcewake dance, something we only learnt of later. Now it appears
that reading the reported head position from the HWS is returning
garbage, leading once again to hangs.
For example, on q35 the autoreported head reports:
[ 217.975608] head now 00010000, actual 00010000
[ 436.725613] head now 00200000, actual 00200000
[ 462.956033] head now 00210000, actual 00210010
[ 485.501409] head now 00400000, actual 00400020
[ 508.064280] head now 00410000, actual 00410000
[ 530.576078] head now 00600000, actual 00600020
[ 553.273489] head now 00610000, actual 00610018
which appears reasonably sane. In contrast, if we look at snb:
[ 141.970680] head now 00e10000, actual 00008238
[ 141.974062] head now 02734000, actual 000083c8
[ 141.974425] head now 00e10000, actual 00008488
[ 141.980374] head now 032b5000, actual 000088b8
[ 141.980885] head now 03271000, actual 00008950
[ 142.040628] head now 02101000, actual 00008b40
[ 142.180173] head now 02734000, actual 00009050
[ 142.181090] head now 00000000, actual 00000ae0
[ 142.183737] head now 02734000, actual 00009050
In addition, the automatic reporting of the head position is scheduled
to be defeatured in the future. It has no more utility, remove it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45492
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
While fixing up a merge conflict with drm-next I've noticed that we
use the same audio drm connector property also for dp and sdvo
outputs.
So put the new enum to some good use and convert these paths, too. The
HDMI_AUDIO_ prefix is a bit a misnomer. But at least for sdvo it makes
sense (and you can also connect a hdmi monitor with a dp->hdmi cable),
so I've decided to stick with it.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Retiring requests does not typically free up space in the aperture,
so the additional search is pointless.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed
by AIREN. This keyboard seems to have a lot of bugs; NOGET works
around only one of them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: okias <d.okias@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Incrementing the reference count on all objects walked when searching
for space in the aperture is a non-neglible amount of overhead. In fact,
we only need to hold on to a reference for objects that we will evict,
so we can therefore delay the referencing until we find a suitable hole
and only add those objects that fall inside.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some of the LPC32XX_* macros were typed ("LCP32XX_*"), which is fixed by this
patch. (Besides another LCP doc typo.)
Further, the LPC32XX_GPIO_P2_MUX_SET/CLR/STATE macros were missing.
Signed-off-by: Roland Stigge <stigge@antcom.de>
The gpios property is described in Documentation/devicetree/gpio.txt, so
reference this document.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was
ported from NXP's git.lpclinux.com tree.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
This patch fixes the initialization of the interrupt controller of the LPC32xx
by correctly setting up SIC1 and SIC2 instead of (wrongly) using the same value
as for the Main Interrupt Controller (MIC).
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
The GPI_28 IRQ was not registered properly. The registration of
IRQ_LPC32XX_GPI_28 was added and the (wrong) IRQ_LPC32XX_GPI_11 at
LPC32XX_SIC1_IRQ(4) was replaced by IRQ_LPC32XX_GPI_28 (see manual of
LPC32xx / interrupt controller).
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
* kirkwood/board: (2 commits)
ARM: kirkwood: convert uart0 to devicetree.
ARM: kirkwood: add dreamplug (fdt) support.
Series sent by email from Jason Cooper <jason@lakedaemon.net>
Update to Linux 3.3-rc3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This uart is the primary console for the dreamplug. Removed
kirkwood_uart0_init() call from board-dt.c.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g.
Then, switched to SPI based NOR flash.
After talking to Arnd Bergman, chose an incremental approach to adding
devicetree support. First, we use the dtb to tell us we are on the
dreamplug, then we gradually port over drivers.
Driver porting will start with the uart (see next patch), and progress
from there. Possibly, spi/flash/partitions will be next.
When done, board-dt.c will no longer be dreamplug specific, and dt's can
be made for the other kirkwood boards.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use system timestamps if the timestamp can't be computed from the data
sent by the device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Since 9e6c643b (phy/fixed: use an unique MDIO bus name) the name of the fixed
PHY bus is "fixed-0". Teach of_phy_connect_fixed_link() the new name.
Tested on a P1020RDB PowerPC system.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Here are some trivial NTFS changes (a spelling fix and two use before
NULL check cases found by Coverity as well as an update in MAINTAINERS
for the path to the ntfs git repo) together with a simple LDM fix for
parsing fragmented VBLKs.
* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs:
NTFS: Update git repo path in MAINTAINERS file.
LDM: Fix reassembly of extended VBLKs.
NTFS: Correct two spelling errors "dealocate" to "deallocate" in mft.c.
NTFS: Do not dereference pointer before checking for NULL.
NTFS: Remove unused variable.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/AMD: Fix UP build error
x86: Specify a size for the cmp in the NMI handler
x86/nmi: Test saved %cs in NMI to determine nested NMI case
x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h processors
x86/microcode: Remove noisy AMD microcode warning
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Handle pending irqs in irq_startup()
genirq: Unmask oneshot irqs when thread was not woken
Sujith Manoharan