Piecing together directories by looking first in one directory
tree, than in another directory tree and finally in a third
directory tree makes it hard to verify that some directory
entries are not multiply defined and makes it hard to create
efficient implementations the sysctl filesystem.
Replace the sysctl wide list of roots with autogenerated
links from the core sysctl directory tree to the other
sysctl directory trees.
This simplifies sysctl directory reading and lookups as now
only entries in a single sysctl directory tree need to be
considered.
Benchmark before:
make-dummies 0 999 -> 0.44s
rmmod dummy -> 0.065s
make-dummies 0 9999 -> 1m36s
rmmod dummy -> 0.4s
Benchmark after:
make-dummies 0 999 -> 0.63s
rmmod dummy -> 0.12s
make-dummies 0 9999 -> 2m35s
rmmod dummy -> 18s
The slowdown is caused by the lookups used in insert_headers
and put_links to see if we need to add links or remove links.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
When there are errors it is very nice to know the full sysctl path.
Add a simple function that computes the sysctl path and prints it
out.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Simplify the code and the sysctl semantics by autogenerating
sysctl directories when a sysctl table is registered that needs
the directories and autodeleting the directories when there are
no more sysctl tables registered that need them.
Autogenerating directories keeps sysctl tables from depending
on each other, removing all of the arcane register/unregister
ordering constraints and makes it impossible to get the order
wrong when reigsering and unregistering sysctl tables.
Autogenerating directories yields one unique entity that dentries
can point to, retaining the current effective use of the dcache.
Add struct ctl_dir as the type of these new autogenerated
directories.
The attached_by and attached_to fields in ctl_table_header are
removed as they are no longer needed.
The child field in ctl_table is no longer needed by the core of
the sysctl code. ctl_table.child can be removed once all of the
existing users have been updated.
Benchmark before:
make-dummies 0 999 -> 0.7s
rmmod dummy -> 0.07s
make-dummies 0 9999 -> 1m10s
rmmod dummy -> 0.4s
Benchmark after:
make-dummies 0 999 -> 0.44s
rmmod dummy -> 0.065s
make-dummies 0 9999 -> 1m36s
rmmod dummy -> 0.4s
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add a ctl_table_root pointer to ctl_table set so it is easy to
go from a ctl_table_set to a ctl_table_root.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Replace sysctl_head_next with first_entry and next_entry. These new
iterators operate at the level of sysctl table entries and filter
out any sysctl tables that should not be shown.
Utilizing two specialized functions instead of a single function removes
conditionals for handling awkward special cases that only come up
at the beginning of iteration, making the iterators easier to read
and understand.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Replace the helpers that proc_sys_lookup uses with helpers that work
in terms of an entire sysctl directory. This is worse for sysctl_lock
hold times but it is much better for code clarity and the code cleanups
to come.
find_in_table is no longer needed so it is removed.
find_entry a general helper to find entries in a directory is added.
lookup_entry is a simple wrapper around find_entry that takes the
sysctl_lock increases the use count if an entry is found and drops
the sysctl_lock.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Every other directory has a .child member and we look at the .child
for our entries. Do the same for the root_table.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add nreg to ctl_table_header. When nreg drops to 0 the ctl_table_header
will be unregistered.
Factor out drop_sysctl_table from unregister_sysctl_table, and add
the logic for decrementing nreg.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Instead of relying on sysct_head_next(NULL) to magically
return the right header for the root directory instead
explicitly transform NULL into the root directories header.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
While useful at one time for selinux and the sysctl sanity
checks those users no longer use the parent field and we can
safely remove it.
Inspired-by: Lucian Adrian Grijincu <lucian.grijincu@gmil.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Stop validating subdirectories now that we only register leaf tables
- Cleanup and improve the duplicate filename check.
* Run the duplicate filename check under the sysctl_lock to guarantee
we never add duplicate names.
* Reduce the duplicate filename check to nearly O(M*N) where M is the
number of entries in tthe table we are registering and N is the
number of entries in the directory before we got there.
- Move the duplicate filename check into it's own function and call
it directtly from __register_sysctl_table
- Kill the config option as the sanity checks are now cheap enough
the config option is unnecessary. The original reason for the config
option was because we had a huge table used to verify the proc filename
to binary sysctl mapping. That table has now evolved into the binary_sysctl
translation layer and is no longer part of the sysctl_check code.
- Tighten up the permission checks. Guarnateeing that files only have read
or write permissions.
- Removed redudant check for parents having a procname as now everything has
a procname.
- Generalize the backtrace logic so that we print a backtrace from
any failure of __register_sysctl_table that was not caused by
a memmory allocation failure. The backtrace allows us to track
down who erroneously registered a sysctl table.
Bechmark before (CONFIG_SYSCTL_CHECK=y):
make-dummies 0 999 -> 12s
rmmod dummy -> 0.08s
Bechmark before (CONFIG_SYSCTL_CHECK=n):
make-dummies 0 999 -> 0.7s
rmmod dummy -> 0.06s
make-dummies 0 99999 -> 1m13s
rmmod dummy -> 0.38s
Benchmark after:
make-dummies 0 999 -> 0.65s
rmmod dummy -> 0.055s
make-dummies 0 9999 -> 1m10s
rmmod dummy -> 0.39s
The sysctl sanity checks now impose no measurable cost.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Split the registration of a complex ctl_table array which may have
arbitrary numbers of directories (->child != NULL) and tables of files
into a series of simpler registrations that only register tables of files.
Graphically:
register('dir', { + file-a
+ file-b
+ subdir1
+ file-c
+ subdir2
+ file-d
+ file-e })
is transformed into:
wrapper->subheaders[0] = register('dir', {file1-a, file1-b})
wrapper->subheaders[1] = register('dir/subdir1', {file-c})
wrapper->subheaders[2] = register('dir/subdir2', {file-d, file-e})
return wrapper
This guarantees that __register_sysctl_table will only see a simple
ctl_table array with all entries having (->child == NULL).
Care was taken to pass the original simple ctl_table arrays to
__register_sysctl_table whenever possible.
This change is derived from a similar patch written
by Lucrian Grijincu.
Inspired-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
For any component of table passed to __register_sysctl_paths
that actually serves as a path, add that to the cstring path
that is passed to __register_sysctl_table.
The result is that for most calls to __register_sysctl_paths
we only pass a table to __register_sysctl_table that contains
no child directories.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Make __register_sysctl_table the core sysctl registration operation and
make it take a char * string as path.
Now that binary paths have been banished into the real of backwards
compatibility in kernel/binary_sysctl.c where they can be safely
ignored there is no longer a need to use struct ctl_path to represent
path names when registering ctl_tables.
Start the transition to using normal char * strings to represent
pathnames when registering sysctl tables. Normal strings are easier
to deal with both in the internal sysctl implementation and for
programmers registering sysctl tables.
__register_sysctl_paths is turned into a backwards compatibility wrapper
that converts a ctl_path array into a normal char * string.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Creating local copies of directory names is a good idea for
two reasons.
- The dynamic names used by callers must be copied into new
strings by the callers today to ensure the strings do not
change between register and unregister of the sysctl table.
- Sysctl directories have a potentially different lifetime
than the time between register and unregister of any
particular sysctl table.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
In sysctl_net register the two networking roots in the proper order.
In register_sysctl walk the sysctl sets in the reverse order of the
sysctl roots.
Remove parent from ctl_table_set and setup_sysctl_set as it is no
longer needed.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
This adds a small helper retire_sysctl_set to remove the intimate knowledge about
the how a sysctl_set is implemented from net/sysct_net.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
I goofed when I made sysctl directories have nlink == 0.
nlink == 0 means the directory has been deleted.
nlink == 1 meands a directory does not count subdirectories.
Use the default nlink == 1 for sysctl directories.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Move the core sysctl code from kernel/sysctl.c and kernel/sysctl_check.c
into fs/proc/proc_sysctl.c.
Currently sysctl maintenance is hampered by the sysctl implementation
being split across 3 files with artificial layering between them.
Consolidate the entire sysctl implementation into 1 file so that
it is easier to see what is going on and hopefully allowing for
simpler maintenance.
For functions that are now only used in fs/proc/proc_sysctl.c remove
their declarations from sysctl.h and make them static in fs/proc/proc_sysctl.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Simplify the code by treating the base sysctl table like any other
sysctl table and register it with register_sysctl_table.
To ensure this table is registered early enough to avoid problems
call sysctl_init from proc_sys_init.
Rename sysctl_net.c:sysctl_init() to net_sysctl_init() to avoid
name conflicts now that kernel/sysctl.c:sysctl_init() is no longer
static.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- In sysctl.h move functions only available if CONFIG_SYSCL
is defined inside of #ifdef CONFIG_SYSCTL
- Move the stub function definitions for !CONFIG_SYSCTL
into sysctl.h and make them static inlines.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Remove checks for conditions that will never happen. If procname is NULL
the loop would already had bailed out, so there's no need to check it
again.
At the same time this also compacts the function find_in_table() by
refactoring it to be easier to read.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The synchronize_rcu() call resulting from making every serial driver
wake-up capable (commit b3b708fa) slows boot down on my Tegra2x system
(with CONFIG_PREEMPT disabled).
But this is avoidable since it is the device_set_wakeup_enable() and then
subsequence disable which causes the delay. We might as well just make
the device wakeup capable but not actually enable it for wakeup until
needed.
Effectively the current code does this:
device_set_wakeup_capable(dev, 1);
device_set_wakeup_enable(dev, 1);
device_set_wakeup_enable(dev, 0);
We can just drop the last two lines.
Before this change my boot log says:
[ 0.227062] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.702928] serial8250.0: ttyS0 at MMIO 0x70006040 (irq = 69) is a Tegra
after:
[ 0.227264] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.227983] serial8250.0: ttyS0 at MMIO 0x70006040 (irq = 69) is a Tegra
for saving of 450ms.
Suggested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
MISC_DEVICES option alone does not select any kernel code and can cause dependency build warnings, such as:
warning: (KS8851 && AX88796_93CX6 && RTL8180 && RTL8187 && ADM8211 && RT2400PCI && RT2500PCI && RT61PCI && RT2800PCI && R8187SE) selects EEPROM_93CX6 which has unmet direct dependencies (MISC_DEVICES)
As the current drivers/misc/Kconfig stands, it is only possible to select the drivers below if MISC_DEVICES option is selected:
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
source "drivers/misc/iwmc3200top/Kconfig"
source "drivers/misc/ti-st/Kconfig"
source "drivers/misc/lis3lv02d/Kconfig"
source "drivers/misc/carma/Kconfig"
source "drivers/misc/altera-stapl/Kconfig"
So remove MISC_DEVICES option so that nothing is dependant on it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This file needs the basic headers for resource management,
otherwise we will see this build error:
CC [M] drivers/misc/c2port/c2port-duramar2150.o
drivers/misc/c2port/c2port-duramar2150.c: In function ‘duramar2150_c2port_init’:
drivers/misc/c2port/c2port-duramar2150.c:125:2: error: implicit declaration of function ‘request_region’ [-Werror=implicit-function-declaration]
drivers/misc/c2port/c2port-duramar2150.c:139:2: error: implicit declaration of function ‘release_region’ [-Werror=implicit-function-declaration]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix new kernel-doc warning. This file no longer contains
kernel-doc comments.
Warning(include/linux/serial_core.h): no structured comments found
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Protect against pl011_console_write() and the interrupt for
the console UART running concurrently on different CPUs.
Otherwise the console_write could spin for a long time
waiting for the UART to become not busy, while the other
CPU continuously services UART interrupts and keeps the
UART busy.
The checks for sysrq and oops_in_progress are taken
from 8250.c.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: Bibek Basu <bibek.basu@stericsson.com>
Reviewed-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In present driver, shutdown clears RTS and DTR in CR register. But the
documentation "Documentation/serial/driver" suggests not to disable
RTS and DTR in shutdown(). Also RTS and DTR is preserved between shutdown
and startup calls, i.e. these are restored in startup if they were enabled
while doing shutdown. So that if RTS and DTR are set using pl011_set_mctrl
then it should continue even after shutdown->startup sequence.
For throttling/unthrottling user should call pl011_set_mctrl.
Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that there are no users of get_driver() or put_driver(), this
patch (as1513) removes those routines completely.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As part of the removal of get_driver()/put_driver(), this patch
(as1512) gets rid of various useless and unnecessary calls in several
drivers. In some cases it may be desirable to pin the driver by
calling try_module_get(), but that can be done later.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: "David S. Miller" <davem@davemloft.net>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Michael Buesch <m@bues.ch>
CC: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As part of the removal of get_driver()/put_driver(), this patch
(as1511) changes all the places that add dynamic IDs for drivers.
Since these additions are done by writing to the drivers' sysfs
attribute files, and the attributes are removed when the drivers are
unregistered, there is no reason to take an extra reference to the
drivers.
The one exception is the pci-stub driver, which calls pci_add_dynid()
as part of its registration. But again, there's no reason to take an
extra reference here, because the driver can't be unloaded while it is
being registered.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As part of the removal of get_driver()/put_driver(), this patch
(as1510) changes driver_find(); it now drops the reference it acquires
before returning. The patch also adjusts all the callers of
driver_find() to remove the now unnecessary calls to put_driver().
In addition, the patch adds a warning to driver_find(): Callers must
make sure the driver they are searching for does not get unloaded
while they are using it. This has always been the case; driver_find()
has never prevented a driver from being unregistered or unloaded.
Hence the patch will not introduce any new bugs. The existing callers
all seem to be okay in this respect, however I don't understand the
video drivers well enough to be certain about them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Kyungmin Park <kyungmin.park@samsung.com>
CC: Andy Walls <awalls@md.metrocast.net>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Check if the sif is not NULL before de-referencing it
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is a misleading difference between /proc and /sys permissions, /proc is 0555 and /sys is 0755. But
as it is impossible to create or unlink something in /sys it would be nice to have same permissions.
Signed-off-by: Vitaly Kuznetsov <vitty@altlinux.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Davem says:
1) Fix JIT code generation on x86-64 for divide by zero, from Eric Dumazet.
2) tg3 header length computation correction from Eric Dumazet.
3) More build and reference counting fixes for socket memory cgroup
code from Glauber Costa.
4) module.h snuck back into a core header after all the hard work we
did to remove that, from Paul Gortmaker and Jesper Dangaard Brouer.
5) Fix PHY naming regression and add some new PCI IDs in stmmac, from
Alessandro Rubini.
6) Netlink message generation fix in new team driver, should only advertise
the entries that changed during events, from Jiri Pirko.
7) SRIOV VF registration and unregistration fixes, and also add a
missing PCI ID, from Roopa Prabhu.
8) Fix infinite loop in tx queue flush code of brcmsmac, from Stanislaw Gruszka.
9) ftgmac100/ftmac100 build fix, missing interrupt.h include.
10) Memory leak fix in net/hyperv do_set_mutlicast() handling, from Wei Yongjun.
11) Off by one fix in netem packet scheduler, from Vijay Subramanian.
12) TCP loss detection fix from Yuchung Cheng.
13) TCP reset packet MD5 calculation uses wrong address, fix from Shawn Lu.
14) skge carrier assertion and DMA mapping fixes from Stephen Hemminger.
15) Congestion recovery undo performed at the wrong spot in BIC and CUBIC
congestion control modules, fix from Neal Cardwell.
16) Ethtool ETHTOOL_GSSET_INFO is unnecessarily restrictive, from Michał Mirosław.
17) Fix triggerable race in ipv6 sysctl handling, from Francesco Ruggeri.
18) Statistics bug fixes in mlx4 from Eugenia Emantayev.
19) rds locking bug fix during info dumps, from your's truly.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
rds: Make rds_sock_lock BH rather than IRQ safe.
netprio_cgroup.h: dont include module.h from other includes
net: flow_dissector.c missing include linux/export.h
team: send only changed options/ports via netlink
net/hyperv: fix possible memory leak in do_set_multicast()
drivers/net: dsa/mv88e6xxx.c files need linux/module.h
stmmac: added PCI identifiers
llc: Fix race condition in llc_ui_recvmsg
stmmac: fix phy naming inconsistency
dsa: Add reporting of silicon revision for Marvell 88E6123/88E6161/88E6165 switches.
tg3: fix ipv6 header length computation
skge: add byte queue limit support
mv643xx_eth: Add Rx Discard and Rx Overrun statistics
bnx2x: fix compilation error with SOE in fw_dump
bnx2x: handle CHIP_REVISION during init_one
bnx2x: allow user to change ring size in ISCSI SD mode
bnx2x: fix Big-Endianess in ethtool -t
bnx2x: fixed ethtool statistics for MF modes
bnx2x: credit-leakage fixup on vlan_mac_del_all
macvlan: fix a possible use after free
...
This reverts commit 0dd2b62ada.
It causes a bunch of Kconfig errors:
drivers/usb/host/Kconfig:559:error: recursive dependency detected!
drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB
drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB
drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD
showing that this really wasn't the correct fix at all.
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use ehci_setup() in ehci_ls1x_reset().
The Loongson1x SoCs have a built-in EHCI controller.
This patch adds the necessary glue code to make the generic EHCI
driver usable for them.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We can remove the rt_gateway == 0 check but we shouldn't
remove the 'dst' initialization too.
Noticed by Eric Dumazet.
Signed-off-by: David S. Miller <davem@davemloft.net>
We can remove the rt_gateway == 0 check but we shouldn't
remove the 'dst' initialization too.
Noticed by Eric Dumazet.
Signed-off-by: David S. Miller <davem@davemloft.net>
It can never actually happen. rt_gateway is either the fully resolved
flow lookup key's destination address, or the non-zero FIB entry gateway
address.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use INCR8 mode for system bus interface of the USB controller
on MPC512x. This is a work-around for the AHB bus lock up
problem observed on MPC512x when there is heavy simultaneous
PATA write or network (FEC) activity.
See also "12.4 The USB controller can issue transactions that lock
up the AHB bus under certain conditions" in MPC5121e (M36P) Errata.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Matthias Fuchs <matthias.fuchs@esd.ue>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric W. Biederman