Commit Graph

310704 Commits

Author SHA1 Message Date
Mauro Carvalho Chehab a0813ea340 [media] mt2063: Remove most of the #if's
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 22:16:24 -02:00
Mauro Carvalho Chehab cfde89258a [media] mt2063: Use standard Linux types, instead of redefining them
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 22:16:23 -02:00
Mauro Carvalho Chehab b675668aaf [media] mt2063: Fix the driver to make it compile
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 22:16:22 -02:00
Mauro Carvalho Chehab 0ff4843218 [media] mt2063: Move code from mt2063_cfg.h
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 22:16:15 -02:00
Mauro Carvalho Chehab 4dca4efc10 [media] mt2063: Fix some Coding styles at mt2063.h
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 22:16:04 -02:00
K. Y. Srinivasan 8f257a142f Drivers:hv: Fix a bug in vmbus_driver_unregister()
The function vmbus_exists() was introduced recently to deal with cases where
the vmbus driver failed to initialize and yet other Hyper-V drivers attempted
to register with the vmbus bus driver. This patch introduced a bug where
vmbus_driver_unregister() would fail to unregister the driver. This patch
fixes the problem.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Fuzhou Chen <fuzhouch@microsoft.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 16:14:44 -08:00
Mauro Carvalho Chehab 0e301442d6 [media] mt2063: CodingStyle fixes
convert to Unix eol, run Lindent and remove bad whitespaces

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 22:13:54 -02:00
Haiyang Zhang 4d447c9a6e net/hyperv: Add support for jumbo frame up to 64KB
Allow the user set the MTU up to 65536 for Linux guests running on
Hyper-V 2008 R2 or later.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 16:13:05 -08:00
Haiyang Zhang f157e78de5 net/hyperv: Add NETVSP protocol version negotiation
Automatically negotiate the highest protocol version mutually recognized by
both host and guest.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 16:13:05 -08:00
Haiyang Zhang 453263421f net/hyperv: Remove unnecessary kmap_atomic in netvsc driver
__get_free_pages() doesn't return HI memory, so the memory is always mapped.
kmap_atomic() is not necessary here. This patch removes the kmap_atomic()
calls and related code for locking and page manipulation.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 16:13:05 -08:00
Mauro Carvalho Chehab 223c7b05e5 [media] add driver for mt2063
Those files are marked as licensed with GPL, so, it is ok to
merge. They came from Terratec site:

http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 22:12:41 -02:00
Alan Stern d8cae98cdd USB: update documentation for usbmon
The documentation for usbmon is out of date; the usbfs "devices" file
now exists in /sys/kernel/debug/usb rather than /proc/bus/usb.  This
patch (as1505) updates the documentation accordingly, and also
mentions that the necessary information can be found by running lsusb.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 16:04:30 -08:00
Huajun Li 1a3a026ba1 usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops
Echo vendor and product number of a non usb-storage device to
usb-storage driver's new_id, then plug in the device to host and you
will find following oops msg, the root cause is usb_stor_probe1()
refers invalid id entry if giving a dynamic id, so just disable the
feature.

[ 3105.018012] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 3105.018062] CPU 0
[ 3105.018075] Modules linked in: usb_storage usb_libusual bluetooth
dm_crypt binfmt_misc snd_hda_codec_analog snd_hda_intel snd_hda_codec
snd_hwdep hp_wmi ppdev sparse_keymap snd_pcm snd_seq_midi snd_rawmidi
snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse snd
serio_raw tpm_infineon soundcore i915 snd_page_alloc tpm_tis
parport_pc tpm tpm_bios drm_kms_helper drm i2c_algo_bit video lp
parport usbhid hid sg sr_mod sd_mod ehci_hcd uhci_hcd usbcore e1000e
usb_common floppy
[ 3105.018408]
[ 3105.018419] Pid: 189, comm: khubd Tainted: G          I  3.2.0-rc7+
#29 Hewlett-Packard HP Compaq dc7800p Convertible Minitower/0AACh
[ 3105.018481] RIP: 0010:[<ffffffffa045830d>]  [<ffffffffa045830d>]
usb_stor_probe1+0x2fd/0xc20 [usb_storage]
[ 3105.018536] RSP: 0018:ffff880056a3d830  EFLAGS: 00010286
[ 3105.018562] RAX: ffff880065f4e648 RBX: ffff88006bb28000 RCX: 0000000000000000
[ 3105.018597] RDX: ffff88006f23c7b0 RSI: 0000000000000001 RDI: 0000000000000206
[ 3105.018632] RBP: ffff880056a3d900 R08: 0000000000000000 R09: ffff880067365000
[ 3105.018665] R10: 00000000000002ac R11: 0000000000000010 R12: ffff6000b41a7340
[ 3105.018698] R13: ffff880065f4ef60 R14: ffff88006bb28b88 R15: ffff88006f23d270
[ 3105.018733] FS:  0000000000000000(0000) GS:ffff88007a200000(0000)
knlGS:0000000000000000
[ 3105.018773] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3105.018801] CR2: 00007fc99c8c4650 CR3: 0000000001e05000 CR4: 00000000000006f0
[ 3105.018835] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3105.018870] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3105.018906] Process khubd (pid: 189, threadinfo ffff880056a3c000,
task ffff88005677a400)
[ 3105.018945] Stack:
[ 3105.018959]  0000000000000000 0000000000000000 ffff880056a3d8d0
0000000000000002
[ 3105.019011]  0000000000000000 ffff880056a3d918 ffff880000000000
0000000000000002
[ 3105.019058]  ffff880056a3d8d0 0000000000000012 ffff880056a3d8d0
0000000000000006
[ 3105.019105] Call Trace:
[ 3105.019128]  [<ffffffffa0458cd4>] storage_probe+0xa4/0xe0 [usb_storage]
[ 3105.019173]  [<ffffffffa0097822>] usb_probe_interface+0x172/0x330 [usbcore]
[ 3105.019211]  [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0
[ 3105.019243]  [<ffffffff815fdd43>] __device_attach+0x73/0x90
[ 3105.019272]  [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110
[ 3105.019303]  [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0
[ 3105.019334]  [<ffffffff815fd6c7>] device_attach+0xf7/0x120
[ 3105.019364]  [<ffffffff815fc905>] bus_probe_device+0x45/0x80
[ 3105.019396]  [<ffffffff815f98a6>] device_add+0x876/0x990
[ 3105.019434]  [<ffffffffa0094e42>] usb_set_configuration+0x822/0x9e0 [usbcore]
[ 3105.019479]  [<ffffffffa00a3492>] generic_probe+0x62/0xf0 [usbcore]
[ 3105.019518]  [<ffffffffa0097a46>] usb_probe_device+0x66/0xb0 [usbcore]
[ 3105.019555]  [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0
[ 3105.019589]  [<ffffffff815fdd43>] __device_attach+0x73/0x90
[ 3105.019617]  [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110
[ 3105.019648]  [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0
[ 3105.019680]  [<ffffffff815fd6c7>] device_attach+0xf7/0x120
[ 3105.019709]  [<ffffffff815fc905>] bus_probe_device+0x45/0x80
[ 3105.021040] usb usb6: usb auto-resume
[ 3105.021045] usb usb6: wakeup_rh
[ 3105.024849]  [<ffffffff815f98a6>] device_add+0x876/0x990
[ 3105.025086]  [<ffffffffa0088987>] usb_new_device+0x1e7/0x2b0 [usbcore]
[ 3105.025086]  [<ffffffffa008a4d7>] hub_thread+0xb27/0x1ec0 [usbcore]
[ 3105.025086]  [<ffffffff810d5200>] ? wake_up_bit+0x50/0x50
[ 3105.025086]  [<ffffffffa00899b0>] ? usb_remote_wakeup+0xa0/0xa0 [usbcore]
[ 3105.025086]  [<ffffffff810d49b8>] kthread+0xd8/0xf0
[ 3105.025086]  [<ffffffff81939884>] kernel_thread_helper+0x4/0x10
[ 3105.025086]  [<ffffffff8192a8c0>] ? _raw_spin_unlock_irq+0x50/0x80
[ 3105.025086]  [<ffffffff8192b1b4>] ? retint_restore_args+0x13/0x13
[ 3105.025086]  [<ffffffff810d48e0>] ? __init_kthread_worker+0x80/0x80
[ 3105.025086]  [<ffffffff81939880>] ? gs_change+0x13/0x13
[ 3105.025086] Code: 00 48 83 05 cd ad 00 00 01 48 83 05 cd ad 00 00
01 4c 8b ab 30 0c 00 00 48 8b 50 08 48 83 c0 30 48 89 45 a0 4c 89 a3
40 0c 00 00 <41> 0f b6 44 24 10 48 89 55 a8 3c ff 0f 84 b8 04 00 00 48
83 05
[ 3105.025086] RIP  [<ffffffffa045830d>] usb_stor_probe1+0x2fd/0xc20
[usb_storage]
[ 3105.025086]  RSP <ffff880056a3d830>
[ 3105.060037] hub 6-0:1.0: hub_resume
[ 3105.062616] usb usb5: usb auto-resume
[ 3105.064317] ehci_hcd 0000:00:1d.7: resume root hub
[ 3105.094809] ---[ end trace a7919e7f17c0a727 ]---
[ 3105.130069] hub 5-0:1.0: hub_resume
[ 3105.132131] usb usb4: usb auto-resume
[ 3105.132136] usb usb4: wakeup_rh
[ 3105.180059] hub 4-0:1.0: hub_resume
[ 3106.290052] usb usb6: suspend_rh (auto-stop)
[ 3106.290077] usb usb4: suspend_rh (auto-stop)

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 16:04:30 -08:00
Linus Torvalds 805a6af8db Linux 3.2 2012-01-04 15:55:44 -08:00
Julia Lawall e7c8e8605d drivers/usb/class/cdc-acm.c: clear dangling pointer
On some failures, the country_code field of an acm structure is freed
without freeing the acm structure itself.  Elsewhere, operations including
memcpy and kfree are performed on the country_code field.  The patch sets
the country_code field to NULL when it is freed, and likewise sets the
country_code_size field to 0.

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:52:43 -08:00
Julia Lawall 5632c827cb drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree
Glue needs to be freed on exiting the function in an error case.
Furthermore, pci, which is the first argument to the probe function should
not be freed before leaveing the function, as it is reused at the call
site.  So the free of pci is changed to free glue instead.

A simplified version of the semantic match that finds the problem is as
follows: (http://coccinelle.lip6.fr)

// <smpl>
@r exists@
local idexpression x;
statement S;
identifier f1;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
x->f1
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:52:42 -08:00
Julia Lawall 30a0dee780 drivers/usb/host/isp1760-if.c: introduce missing kfree
drvdata needds to be freed before leaving the function in an error case.

A simplified version of the semantic match that finds the problem is as
follows: (http://coccinelle.lip6.fr)

// <smpl>
@r exists@
local idexpression x;
statement S;
identifier f1;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
x->f1
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:52:42 -08:00
Janne Snabb 3c8c931671 usb: option: add ZD Incorporated HSPA modem
Add support for Chinese Noname HSPA USB modem which is apparently
manufactured by a company called ZD Incorporated (based on texts in the
Windows drivers).

This product is available at least from Dealextreme (SKU 80032) and
possibly in India with name Olive V-MW250. It is based on Qualcomm
MSM6280 chip.

I needed to also add "options usb-storage quirks=0685:7000:i" in modprobe
configuration because udevd or the kernel keeps poking the embedded
fake-cd-rom which fails and causes the device to reset. There might be
a better way to accomplish the same. usb_modeswitch is not needed with
this device.

Signed-off-by: Janne Snabb <snabb@epipe.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:52:42 -08:00
Felipe Balbi 18b7ede5f7 usb: ch9: fix up MaxStreams helper
According to USB 3.0 Specification Table 9-22, if
bmAttributes [4:0] are set to zero, it means "no
streams supported", but the way this helper was
defined on Linux, we will *always* have one stream
which might cause several problems.

For example on DWC3, we would tell the controller
endpoint has streams enabled and yet start transfers
with Stream ID set to 0, which would goof up the host
side.

While doing that, convert the macro to an inline
function due to the different checks we now need.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:52:42 -08:00
Ming Lei e28dbb0661 USB: usb-skeleton.c: cleanup open_count
It is not necessary to use the 'open_count' for handling
runtime pm only, because runtinme pm has built-in counter
to handle this, so remove it to make code clean.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:52:41 -08:00
Ming Lei 26c71a79ca USB: usb-skeleton.c: fix open/disconnect race
If usb device is disconnected between usb_get_intfdata()
and kref_get() in skel_open(), kref_get may access a freed
object.

Also check if device is disconnected in ->open.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:52:41 -08:00
Hans de Goede 71d85724bd xhci: Properly handle COMP_2ND_BW_ERR
I encountered a result of COMP_2ND_BW_ERR while improving how the pwc
webcam driver handles not having the full usb1 bandwidth available to
itself.

I created the following test setup, a NEC xhci controller with a
single TT USB 2 hub plugged into it, with a usb keyboard and a pwc webcam
plugged into the usb2 hub. This caused the following to show up in dmesg
when trying to stream from the pwc camera at its highest alt setting:

xhci_hcd 0000:01:00.0: ERROR: unexpected command completion code 0x23.
usb 6-2.1: Not enough bandwidth for altsetting 9

And usb_set_interface returned -EINVAL, which caused my pwc code to not
do the right thing as it expected -ENOSPC.

This patch makes the xhci driver properly handle COMP_2ND_BW_ERR and makes
usb_set_interface return -ENOSPC as expected.

This should be backported to stable kernels as old as 2.6.32.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
2012-01-04 15:50:28 -08:00
Jesper Juhl 2a5ac6f7a9 isl29020: Remove a redundant semi-colon from return statement
One is enough.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:21:56 -08:00
Jesper Juhl f80ea66808 BMP085: Remove redundant semi-colon from return statement
Just a single ";" will do nicely.

Signed-off-by: Jesper Juhl <jj@codesealer.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:21:56 -08:00
Pavan Savoy 933aae54be drivers:misc: ti-st: DEBUG uart, baud rate mods
To debug different UARTs at different baud-rates connected to the WiLink
connectivity combo-chipset, this patch enables the debugging code so that upon
boot different UARTs at different baud-rates can be tried out to verify the
interface with WiLink.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:21:04 -08:00
Pavan Savoy 18ccecf99a drivers:misc: ti-st: flush UART upon fw failure
Upon failure to read firmware version from chip or upon failure in responses
to firmware download the UART needs to be flushed of its existing buffers so
that the UIM can restart UART properly.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:21:04 -08:00
Pavan Savoy bfb88d6c91 drivers:misc: ti-st: protect registrations
Concurrent access to UART2/combo-interface by multiple protocol drivers such
as BT, FM and GPS caused issues during firmware download failure cases or
cases when the firmware download took longer than usual.

This was because of un-safe access to protos_registered & st_states.
Protecting this will also make the registration complete callback un-safe for
sleep.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:21:03 -08:00
Rafael J. Wysocki c233523b3d Merge branch 'pm-sleep' into pm-for-linus
* pm-sleep:
  PM / Hibernate: Implement compat_ioctl for /dev/snapshot
2012-01-05 00:06:24 +01:00
Ben Hutchings c336078bf6 PM / Hibernate: Implement compat_ioctl for /dev/snapshot
This allows uswsusp built for i386 to run on an x86_64 kernel (tested
with Debian package version 1.0+20110509-2).

References: http://bugs.debian.org/502816
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-05 00:05:55 +01:00
Greg Kroah-Hartman b9d4e714a8 driver core: remove __must_check from device_create_file
With the conversion of the sysdev to a real struct device, more drivers
are calling device_create_file, and some of them don't check the return
value, which isn't wise.

But as they happen to be in parts of the kernel where a warning is
considered an error (i.e. powerpc), this breaks the build.  So for now,
remove the marking on the function, which fixes the build problems.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:05:10 -08:00
Linus Torvalds 869682384e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fix CAN MAINTAINERS SCM tree type
  mwifiex: fix crash during simultaneous scan and connect
  b43: fix regression in PIO case
  ath9k: Fix kernel panic in AR2427 in AP mode
  CAN MAINTAINERS update
  net: fsl: fec: fix build for mx23-only kernel
  sch_qfq: fix overflow in qfq_update_start()
  Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"
2012-01-04 15:03:49 -08:00
Al Viro d6042eac44 minixfs: misplaced checks lead to dentry leak
bitmap size sanity checks should be done *before* allocating ->s_root;
there their cleanup on failure would be correct.  As it is, we do iput()
on root inode, but leak the root dentry...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04 15:03:06 -08:00
Oleg Nesterov 8a88951b58 ptrace: ensure JOBCTL_STOP_SIGMASK is not zero after detach
This is the temporary simple fix for 3.2, we need more changes in this
area.

1. do_signal_stop() assumes that the running untraced thread in the
   stopped thread group is not possible. This was our goal but it is
   not yet achieved: a stopped-but-resumed tracee can clone the running
   thread which can initiate another group-stop.

   Remove WARN_ON_ONCE(!current->ptrace).

2. A new thread always starts with ->jobctl = 0. If it is auto-attached
   and this group is stopped, __ptrace_unlink() sets JOBCTL_STOP_PENDING
   but JOBCTL_STOP_SIGMASK part is zero, this triggers WANR_ON(!signr)
   in do_jobctl_trap() if another debugger attaches.

   Change __ptrace_unlink() to set the artificial SIGSTOP for report.

   Alternatively we could change ptrace_init_task() to copy signr from
   current, but this means we can copy it for no reason and hide the
   possible similar problems.

Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>		[3.1]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04 15:01:59 -08:00
Oleg Nesterov 50b8d25748 ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race
Test-case:

	int main(void)
	{
		int pid, status;

		pid = fork();
		if (!pid) {
			for (;;) {
				if (!fork())
					return 0;
				if (waitpid(-1, &status, 0) < 0) {
					printf("ERR!! wait: %m\n");
					return 0;
				}
			}
		}

		assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0);
		assert(waitpid(-1, NULL, 0) == pid);

		assert(ptrace(PTRACE_SETOPTIONS, pid, 0,
					PTRACE_O_TRACEFORK) == 0);

		do {
			ptrace(PTRACE_CONT, pid, 0, 0);
			pid = waitpid(-1, NULL, 0);
		} while (pid > 0);

		return 1;
	}

It fails because ->real_parent sees its child in EXIT_DEAD state
while the tracer is going to change the state back to EXIT_ZOMBIE
in wait_task_zombie().

The offending commit is 823b018e which moved the EXIT_DEAD check,
but in fact we should not blame it. The original code was not
correct as well because it didn't take ptrace_reparented() into
account and because we can't really trust ->ptrace.

This patch adds the additional check to close this particular
race but it doesn't solve the whole problem. We simply can't
rely on ->ptrace in this case, it can be cleared if the tracer
is multithreaded by the exiting ->parent.

I think we should kill EXIT_DEAD altogether, we should always
remove the soon-to-be-reaped child from ->children or at least
we should never do the DEAD->ZOMBIE transition. But this is too
complex for 3.2.

Reported-and-tested-by: Denys Vlasenko <vda.linux@googlemail.com>
Tested-by: Lukasz Michalik <lmi@ift.uni.wroc.pl>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>		[3.0+]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04 15:01:59 -08:00
Linus Torvalds 8d9cbf8240 Merge git://git.samba.org/sfrench/cifs-2.6
* git://git.samba.org/sfrench/cifs-2.6:
  [CIFS] default ntlmv2 for cifs mount delayed to 3.3
  cifs: fix bad buffer length check in coalesce_t2
2012-01-04 14:57:55 -08:00
Steven Toth 9c9c3d078b [media] cx23885: Configure the MPEG encoder early to avoid jerky video
Found an odd bug while implementing support for the HVR1850 that
lead to jerky video during the first capture, if the encoder was
not initialized early. I've modied the driver to configure the
encoder early, and this avoids the issue - a reasonable workaround.

Regression tested against the HVR1800 and soon to be added HVR1850

[mchehab@redhat.com: Fix this compilation issue:  drivers/media/video/cx23885/cx23885-417.c:1351:2: error: too few arguments to function ‘cx23885_initialize_codec’]
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 20:51:18 -02:00
Steven Toth 38e3d7ce41 [media] cx23885: Ensure the MPEG encoder height is configured from the norm
Bugfix: The height was not always correctly configured if switching between
different video standards. Change the encode height based on the standard.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 20:48:29 -02:00
Steven Toth 182d29f307 [media] cx23885: Cleanup MPEG encoder GPIO handling
During initialization the prior GPIO's were not being preserved
and restore correctly. Small cleanups to configure the GPIO's
for the HVR1700, HVR1800 and HVR1850.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 20:48:09 -02:00
Steven Toth 4c3764d150 [media] cx25840 / cx23885: Fixing audio/volume regression
Since the conversion to subdev in Oct 2010 the audio controls have
not functioned correctly in the cx23885 driver. Passing values of
0-3f did not translate into meaningfull register writes. I've
converted the cx23885 driver to match the cx25840 volume control
definition and now audio is working reliably again.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 20:47:11 -02:00
matthieu castet c81c0060ac [media] tm6000: dvb doesn't work on usb1.1
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 20:45:34 -02:00
matthieu castet 3874cd7796 [media] tm6000: improve loading speed on hauppauge 900H
- enable fast usb quirk
- use usleep_range instead on msleep for short sleep
- merge i2c out and usb delay
- do like the windows driver that upload the tuner firmware
  with 80 bytes packets

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
CC: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-04 20:37:54 -02:00
Djalal Harouni 014a177037 ext4: add missing ext4_resize_end on error paths
Online resize ioctls 'EXT4_IOC_GROUP_EXTEND' and 'EXT4_IOC_GROUP_ADD'
call ext4_resize_begin() to check permissions and to set the
EXT4_RESIZING bit lock, they do their work and they must finish with
ext4_resize_end() which calls clear_bit_unlock() to unlock and to
avoid -EBUSY errors for the next resize operations.

This patch adds the missing ext4_resize_end() calls on error paths.

Patch tested.

Cc: stable@vger.kernel.org
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-01-04 17:09:52 -05:00
Yongqiang Yang 61f296cc49 ext4: let ext4_group_add() use common code
This patch lets ext4_group_add() call ext4_flex_group_add().

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-01-04 17:09:50 -05:00
Yongqiang Yang d89651c8e2 ext4: let ext4_group_extend() use common code
ext4_group_extend_no_check() is moved out from ext4_group_extend(),
this patch lets ext4_group_extend() call ext4_group_extentd_no_check()
instead.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-01-04 17:09:48 -05:00
Yongqiang Yang 19c5246d25 ext4: add new online resize interface
This patch adds new online resize interface, whose input argument is a
64-bit integer indicating how many blocks there are in the resized fs.

In new resize impelmentation, all work like allocating group tables
are done by kernel side, so the new resize interface can support
flex_bg feature and prepares ground for suppoting resize with features
like bigalloc and exclude bitmap. Besides these, user-space tools just
passes in the new number of blocks.

We delay initializing the bitmaps and inode tables of added groups if
possible and add multi groups (a flex groups) each time, so new resize
is very fast like mkfs.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-01-04 17:09:44 -05:00
Ian Campbell a800651e88 xen/xenbus: don't reimplement kvasprintf via a fixed size buffer
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Haogang Chen <haogangchen@gmail.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-04 17:02:05 -05:00
Ian Campbell 50bf73796e xenbus: maximum buffer size is XENSTORE_PAYLOAD_MAX
Use this now that it is defined even though it happens to be == PAGE_SIZE.

The code which takes requests from userspace already validates against the size
of this buffer so no further checks are required to ensure that userspace
requests comply with the protocol in this respect.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Haogang Chen <haogangchen@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-04 17:02:04 -05:00
Ian Campbell 9e7860cee1 xen/xenbus: Reject replies with payload > XENSTORE_PAYLOAD_MAX.
Haogang Chen found out that:

 There is a potential integer overflow in process_msg() that could result
 in cross-domain attack.

 	body = kmalloc(msg->hdr.len + 1, GFP_NOIO | __GFP_HIGH);

 When a malicious guest passes 0xffffffff in msg->hdr.len, the subsequent
 call to xb_read() would write to a zero-length buffer.

 The other end of this connection is always the xenstore backend daemon
 so there is no guest (malicious or otherwise) which can do this. The
 xenstore daemon is a trusted component in the system.

 However this seem like a reasonable robustness improvement so we should
 have it.

And Ian when read the API docs found that:
        The payload length (len field of the header) is limited to 4096
        (XENSTORE_PAYLOAD_MAX) in both directions.  If a client exceeds the
        limit, its xenstored connection will be immediately killed by
        xenstored, which is usually catastrophic from the client's point of
        view.  Clients (particularly domains, which cannot just reconnect)
        should avoid this.

so this patch checks against that instead.

This also avoids a potential integer overflow pointed out by Haogang Chen.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Haogang Chen <haogangchen@gmail.com>
CC: stable@kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-04 17:02:03 -05:00
Jan Beulich 73db144b58 Xen: consolidate and simplify struct xenbus_driver instantiation
The 'name', 'owner', and 'mod_name' members are redundant with the
identically named fields in the 'driver' sub-structure. Rather than
switching each instance to specify these fields explicitly, introduce
a macro to simplify this.

Eliminate further redundancy by allowing the drvname argument to
DEFINE_XENBUS_DRIVER() to be blank (in which case the first entry from
the ID table will be used for .driver.name).

Also eliminate the questionable xenbus_register_{back,front}end()
wrappers - their sole remaining purpose was the checking of the
'owner' field, proper setting of which shouldn't be an issue anymore
when the macro gets used.

v2: Restore DRV_NAME for the driver name in xen-pciback.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-04 17:01:17 -05:00
Tony Breeds ef88e3911c powerpc: fix compile error with 85xx/p1010rdb.c
Current linux-next compiled with mpc85xx_defconfig causes this:

arch/powerpc/platforms/85xx/p1010rdb.c:41:14: error: 'np' undeclared (first use in this function)
arch/powerpc/platforms/85xx/p1023_rds.c:102:14: error: 'np' undeclared (first use in this function)

Introduced in:
  commit 996983b75c
  Author: Kyle Moffett <Kyle.D.Moffett@boeing.com>
  Date:   Fri Dec 2 06:28:02 2011 +0000
  powerpc/mpic: Search for open-pic device-tree node if NULL

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-04 15:52:40 -06:00