Commit Graph

310704 Commits

Author SHA1 Message Date
Axel Lin 8270ba0c96 ASoC: mid-x86: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23 11:32:09 +00:00
Axel Lin 9b344ce80f ASoC: kirkwood: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23 11:32:09 +00:00
Axel Lin e181d14ac3 ASoC: txx9: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23 11:32:08 +00:00
Axel Lin 4a7042e599 ASoC: sh: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23 11:32:07 +00:00
Axel Lin 23bd1ce48f ASoC: s6000: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23 11:32:00 +00:00
Axel Lin b5a67048d0 ASoC: nuc900: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23 11:16:58 +00:00
Axel Lin 1d9d25b352 ASoC: jz4740: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23 11:16:57 +00:00
Axel Lin 6aff8ccb0c ASoC: imx: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23 11:16:43 +00:00
Axel Lin 662d4e5c24 ASoC: au1x: Add .owner to struct snd_soc_card
Add missing .owner of struct snd_soc_card. This prevents the module from being
removed from underneath its users.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23 11:16:29 +00:00
Vladimir Zapolskiy 55205c916e oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue
This change fixes a linking problem, which happens if oprofile
is selected to be compiled as built-in:

  `oprofile_arch_exit' referenced in section `.init.text' of
  arch/arm/oprofile/built-in.o: defined in discarded section
  `.exit.text' of arch/arm/oprofile/built-in.o

The problem is appeared after commit 87121ca504, which
introduced oprofile_arch_exit() calls from __init function. Note
that the aforementioned commit has been backported to stable
branches, and the problem is known to be reproduced at least
with 3.0.13 and 3.1.5 kernels.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@nokia.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20111222151540.GB16765@erda.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-23 11:58:34 +01:00
Dave Jones 664dfa65e8 sched: Disable scheduler warnings during oopses
The panic-on-framebuffer code seems to cause a schedule
to occur during an oops. This causes a bunch of extra
spew as can be seen in:

   https://bugzilla.redhat.com/attachment.cgi?id=549230

Don't do scheduler debug checks when we are oopsing already.

Signed-off-by: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/r/20111222213929.GA4722@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-23 11:20:50 +01:00
Tai-hwa Liang d9bae67a7a Input: sentelic - release mutex upon register write failure
Make sure that mutex is released upon register writing failure.
This fixes boot freezing observed on ARM based OLPC
(http://dev.laptop.org/ticket/11357).

Signed-off-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-23 01:15:31 -08:00
Tai-hwa Liang e24f734ef1 Input: sentelic - document the latest hardware
- Add documentation for the Cx/Dx hardware release;
- Fix wrong register offset for retrieving button information;
- Document programming sequence for page register R/W;
- Document a couple of supported gesture IDs.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-23 01:15:16 -08:00
Vinod Koul 40741dd5c2 ALSA: core: add makefile and kconfig file for compress
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-23 10:08:38 +01:00
Vinod Koul b21c60a4ed ALSA: core: add support for compress_offload
This patch adds core.c, the file which implements the ioctls and
registers the devices

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-23 10:08:25 +01:00
Vinod Koul e60061a379 ALSA: core: add API header and driver header files
This patch adds the header files for ioctl definitions and header file for
driver APIs for lower level device drivers to use

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-23 10:08:11 +01:00
Vinod Koul 50c34cfe7b ALSA: core: add compress parameter definations
The patch adds the various definations used to define the encoder
and decoder parameters

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-23 10:07:58 +01:00
Omair Mohammed Abdullah 3eafc959b3 ALSA: core: add support for compressed devices
Use the minor numbers 2 and 3 for audio compressed offload devices.
Also add support for these devices in core

Signed-off-by: Omair Mohammed Abdullah <omair.m.abdullah@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-23 10:07:46 +01:00
Pierre-Louis Bossart 57bd9b8ddd ALSA: compress offload API documentation
The patch adds the documentation file explaining the API

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-23 10:06:53 +01:00
Eric Dumazet 0fd7bac6b6 net: relax rcvbuf limits
skb->truesize might be big even for a small packet.

Its even bigger after commit 87fb4b7b53 (net: more accurate skb
truesize) and big MTU.

We should allow queueing at least one packet per receiver, even with a
low RCVBUF setting.

Reported-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-23 02:15:14 -05:00
stephen hemminger 2c64580046 netlink: wake up netlink listeners sooner (v2)
This patch changes it to yield sooner at halfway instead. Still not a cure-all
for listener overrun if listner is slow, but works much reliably.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:37:19 -05:00
stephen hemminger b57ef81ff8 netlink: af_netlink cleanup (v2)
Don't inline functions that cover several lines, and do inline
the trivial ones. Also make some arguments const.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:37:19 -05:00
Glauber Costa 65c64ce8ee Partial revert "Basic kernel memory functionality for the Memory Controller"
This reverts commit e5671dfae5.

After a follow up discussion with Michal, it was agreed it would
be better to leave the kmem controller with just the tcp files,
deferring the behavior of the other general memory.kmem.* files
for a later time, when more caches are controlled. This is because
generic kmem files are not used by tcp accounting and it is
not clear how other slab caches would fit into the scheme.

We are reverting the original commit so we can track the reference.
Part of the patch is kept, because it was used by the later tcp
code. Conflicts are shown in the bottom. init/Kconfig is removed from
the revert entirely.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
CC: Kirill A. Shutemov <kirill@shutemov.name>
CC: Paul Menage <paul@paulmenage.org>
CC: Greg Thelen <gthelen@google.com>
CC: Johannes Weiner <jweiner@redhat.com>
CC: David S. Miller <davem@davemloft.net>

Conflicts:

	Documentation/cgroups/memory.txt
	mm/memcontrol.c
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:37:18 -05:00
Xi Wang a0a129f8b6 rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
Setting a large rps_flow_cnt like (1 << 30) on 32-bit platform will
cause a kernel oops due to insufficient bounds checking.

	if (count > 1<<30) {
		/* Enforce a limit to prevent overflow */
		return -EINVAL;
	}
	count = roundup_pow_of_two(count);
	table = vmalloc(RPS_DEV_FLOW_TABLE_SIZE(count));

Note that the macro RPS_DEV_FLOW_TABLE_SIZE(count) is defined as:

	... + (count * sizeof(struct rps_dev_flow))

where sizeof(struct rps_dev_flow) is 8.  (1 << 30) * 8 will overflow
32 bits.

This patch replaces the magic number (1 << 30) with a symbolic bound.

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:34:56 -05:00
Eric Dumazet e688a60480 net: introduce DST_NOPEER dst flag
Chris Boot reported crashes occurring in ipv6_select_ident().

[  461.457562] RIP: 0010:[<ffffffff812dde61>]  [<ffffffff812dde61>]
ipv6_select_ident+0x31/0xa7

[  461.578229] Call Trace:
[  461.580742] <IRQ>
[  461.582870]  [<ffffffff812efa7f>] ? udp6_ufo_fragment+0x124/0x1a2
[  461.589054]  [<ffffffff812dbfe0>] ? ipv6_gso_segment+0xc0/0x155
[  461.595140]  [<ffffffff812700c6>] ? skb_gso_segment+0x208/0x28b
[  461.601198]  [<ffffffffa03f236b>] ? ipv6_confirm+0x146/0x15e
[nf_conntrack_ipv6]
[  461.608786]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.614227]  [<ffffffff81271d64>] ? dev_hard_start_xmit+0x357/0x543
[  461.620659]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.626440]  [<ffffffffa0379745>] ? br_parse_ip_options+0x19a/0x19a
[bridge]
[  461.633581]  [<ffffffff812722ff>] ? dev_queue_xmit+0x3af/0x459
[  461.639577]  [<ffffffffa03747d2>] ? br_dev_queue_push_xmit+0x72/0x76
[bridge]
[  461.646887]  [<ffffffffa03791e3>] ? br_nf_post_routing+0x17d/0x18f
[bridge]
[  461.653997]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.659473]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.665485]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.671234]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.677299]  [<ffffffffa0379215>] ?
nf_bridge_update_protocol+0x20/0x20 [bridge]
[  461.684891]  [<ffffffffa03bb0e5>] ? nf_ct_zone+0xa/0x17 [nf_conntrack]
[  461.691520]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.697572]  [<ffffffffa0374812>] ? NF_HOOK.constprop.8+0x3c/0x56
[bridge]
[  461.704616]  [<ffffffffa0379031>] ?
nf_bridge_push_encap_header+0x1c/0x26 [bridge]
[  461.712329]  [<ffffffffa037929f>] ? br_nf_forward_finish+0x8a/0x95
[bridge]
[  461.719490]  [<ffffffffa037900a>] ?
nf_bridge_pull_encap_header+0x1c/0x27 [bridge]
[  461.727223]  [<ffffffffa0379974>] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge]
[  461.734292]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.739758]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.746203]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.751950]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.758378]  [<ffffffffa037533a>] ? NF_HOOK.constprop.4+0x56/0x56
[bridge]

This is caused by bridge netfilter special dst_entry (fake_rtable), a
special shared entry, where attaching an inetpeer makes no sense.

Problem is present since commit 87c48fa3b4 (ipv6: make fragment
identifications less predictable)

Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and
__ip_select_ident() fallback to the 'no peer attached' handling.

Reported-by: Chris Boot <bootc@bootc.net>
Tested-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:34:56 -05:00
Thomas Graf 7838f2ce36 mqprio: Avoid panic if no options are provided
Userspace may not provide TCA_OPTIONS, in fact tc currently does
so not do so if no arguments are specified on the command line.
Return EINVAL instead of panicing.

Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:34:56 -05:00
Eric Dumazet a13861a28b bridge: provide a mtu() method for fake_dst_ops
Commit 618f9bc74a (net: Move mtu handling down to the protocol
depended handlers) forgot the bridge netfilter case, adding a NULL
dereference in ip_fragment().

Reported-by: Chris Boot <bootc@bootc.net>
CC: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:34:56 -05:00
Steven Rostedt c2857cb4a8 ktest: Fix compare script to test if options are not documented
The compare script compare-ktest-sample.pl checks for options
that are defined in ktest.pl and not documented in samples.conf,
as well as samples in samples.conf that are not used in ktest.pl.

With the switch to the hash format to initialize the ktest variables
the compare script needs to be updated to handle the change.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 22:06:59 -05:00
Steven Rostedt 9cc9e091ed ktest: Detect typos in option names
It becomes quite annoying when you go to run a test and then
realize that you typed an option name wrong, and the test starts
doing the default action and not what you expected it to do.

It is even more annoying when you wake up the next day after
running the test over night when you discover this.

By testing if all options specified in a config file are
used by either ktest or were used in one of the option's values
we can see if there are any dangling options that were not used.
In such a case, show the user the options that were not used
and ask them if they want to continue or not.

The option IGNORE_UNUSED was also added to allow the user to
override this feature.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 22:02:35 -05:00
Steven Rostedt b5f4aea687 ktest: Have all values be set by defaults
Currently the patchcheck, bisect, and config_bisect variables
are only able to be set per test. You can not set a default
value for them.

By letting default values be set, it makes some config files
a bit easier, and also makes it easier to find typos in the
option names.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 22:00:52 -05:00
Steven Rostedt 4f43e0dcaf ktest: Change initialization of defaults hash to perl format
Initializing each default value by specifying the hash name is
ugly. This is one of the rare cases that the "perl way" is actually
much cleaner and easier to read.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:44 -05:00
Steven Rostedt bc7c580377 ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST
For machines that do no use grub, it may be needed to update an
external image (tftp) before doing a reboot into either the
test image or the known good image.

The option SWITCH_TO_GOOD is added, where if it is defined, the
command that is specified as its value will be executed before
doing a reboot into a known good image.

The option SWITCH_TO_TEST is added, where if it is defined, the
command that is specified as its value will be executed before
doing a reboot into the test image.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:41 -05:00
Steven Rostedt c5dacb88f0 ktest: Allow overriding bisect test results
When running the ktest git bisect test, if the BISECT_TYPE is "test",
the bisect is determined to be good or bad based off of the error
code of the test that is run. Currently, if the test returns 0,
it is considered a pass (good), a non-zero is considered a fail (bad).

But it has been requested to add more options, and also change
the meanings of the error codes of the test. For example, one may
want the test to detect if the commit is not good or bad,
(maybe the bisect came to a point where the code in question
does not exist). The test could report an error code that should tell
ktest to skip the commit.

Also, a test could detect that something is horribly wrong and the
biscet should just be aborted.

The new options:

 BISECT_RET_GOOD
 BISECT_RET_BAD
 BISECT_RET_SKIP
 BISECT_RET_ABORT
 BISECT_RET_DEFAULT

have been added. The first 4 take an integer value that will
represent if the test should be considered a pass, fail, neither
good nor bad, or abort respectively.

The BISECT_RET_DEFAULT will bo whatever is not defined by the
above codes. If only BISECT_RET_DEFAULT is defined, then all tests
will do the default.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:38 -05:00
Steven Rostedt cad9666980 ktest: Evaluate options before processing them
All options can take variables "${var}". Before doing any processing
or decision making on the content of an option, evaluate it incase
there are variables that may change the outcome.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:36 -05:00
Steven Rostedt 2b29b2f8f8 ktest: Evaluate $KERNEL_VERSION in both install and post install
The install process may also need to know what the kernel version
is, to add it to the name. Evaluate it for both install and
post install.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:33 -05:00
Steven Rostedt 165708b273 ktest: Only ask options needed for install
If all the tests are only for build or install, do not ask
for options not needed to do the install, if the options do
not exist.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:30 -05:00
Steven Rostedt dbd3783b4d ktest: When creating a new config, ask for BUILD_OPTIONS
When creating a new config, ask for the BUILD_OPTIONS variable
that lets users add things like -j20 to the make.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:26 -05:00
Steven Rostedt bb8474b181 ktest: Do not ask for some options if the only test is build
When creating a ktest config or if te config only has build only
tests, some of the manditory config options are not needed.

Do not ask for them if all tests in the config file are just build
tests.

Suggested-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:22 -05:00
Steven Rostedt c4261d0f62 ktest: Ask for type of test when creating a new config
When no argument is supplied to ktest, or the config applied does
not exist and a new config is being created, instead of just using
the default test type, give the user an option to pick the test type
of either 'build, install, or boot'. Other options may be added later
but then those would require more questions as they require more
fields. But that's for another release of ktest to add that feature.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:13 -05:00
Steven Rostedt dad9875492 ktest: Allow bisect test to restart where it left off
If a bisect is killed for some reason, have ktest detect that a bisect
is in progress and if so, allow the user to start the bisect where
it left off.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 21:59:01 -05:00
Jingoo Han 62194244cf USB: Add Samsung Exynos OHCI diver
This patch adds USB OHCI driver for Samsung EXYNOS SoCs.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 11:21:56 +09:00
Jingoo Han 744f20f280 ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 11:21:48 +09:00
Jingoo Han 6e7eb170fd ARM: EXYNOS: Add USB OHCI device
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 11:21:28 +09:00
Padmavathi Venna 7d38af51d5 ARM: S3C64XX: Modified according to SPI consolidation work
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the s3c6410 varient SoCs.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 10:50:03 +09:00
Padmavathi Venna 5aa4a395af ARM: S5PV210: Modified files for SPI consolidation work
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Added SPI Setup file for GPIO configurations and platform data
initialization.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 10:50:03 +09:00
Padmavathi Venna 25dada97a9 ARM: S5P64X0: Modified files for SPI consolidation work
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Added SPI Setup file for GPIO configurations and platform data
initialization.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 10:50:02 +09:00
Padmavathi Venna 323d771745 ARM: S5PC100: Modified files for SPI consolidation work
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Added SPI Setup file for GPIO configurations and platform data
initialization.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 10:50:01 +09:00
Padmavathi Venna 4566c7f761 ARM: S3C64XX: Modified files for SPI consolidation work
As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Setup files are added for SPI GPIO configurations and platform data
initialization.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 10:50:00 +09:00
Padmavathi Venna 875a59374c ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung
SPI platform device definitions consolidated from respective machine
folder to plat-samsung

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 10:49:53 +09:00
Padmavathi Venna a153e31abb ARM: SAMSUNG: Remove SPI bus clocks from platform data
SPI bus clocks can be avoided passing through platform
data as spi driver is getting the bus clock using the
generic clock connection id registered via clkdev.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 10:10:46 +09:00