Commit Graph

310704 Commits

Author SHA1 Message Date
Stephen Warren 24692c0fc6 arm/tegra: Make MACH_TEGRA_DT depend on ARCH_TEGRA_2x_SOC
Now that Tegra20 and Tegra30 device tree board files are separate,
MACH_TEGRA_DT (which enables the Tegra20 device tree board file) should
depend on Tegra20 support being enabled.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:06:27 -08:00
Stephen Warren 229f05fdb0 arm/tegra: Delete tegra_init_clock()
tegra_init_clock() is written to call tegra2_init_clocks(), which only
exists if Tegra20 support is enabled. This breaks the build of a
Tegra30-only kernel.

tegra_init_clock() isn't actually used any more; tegra20_init_early()
calls tegra2_init_clocks() directly. So, just delete this function.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:06:05 -08:00
Stephen Warren ac8a494894 arm/tegra: Fix section mismatch errors in tegra30 pinmux
tegra30_pinmux_init() is called from the pinmux's probe() function, and
hence should be __devinit not __init.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:04:41 -08:00
Stephen Warren ba4ba3b02d arm/tegra: Fix section mismatch errors in tegra20 pinmux
tegra20_pinmux_init() is called from the pinmux's probe() function, and
hence should be __devinit not __init.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:04:41 -08:00
Stephen Warren a58116f331 arm/tegra: Use bus notifiers to trigger pinmux setup
Currently, the Tegra pinmux is initialized at different times when booting
with and without device tree:

Without device tree:

1) Pinmux and GPIO drivers are registered.
2) Pinmux is configured.
3) All other drivers are registered.

With device tree:

1) All drivers are registered and probed, including pinmux and GPIO.
2) Pinmux is configured.

This change modifies board-pinmux.c to detect pinmux and GPIO driver
registration using bus notifiers. This allows pinmux configuration to
happen immediately after the pinmux driver is probed, irrespective of
whether the pinmux driver is manually registered by board-pinmux.c, or
if it's instantiated during device tree parsing.

To support this with device tree, the pinmux init functions must be
called prior to instantiating devices from device tree, so that the
notifiers are set up before-hand.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:03:11 -08:00
Stephen Warren 54862bf009 arm/tegra: Refactor board-*-pinmux.c to share code
This moves the implementation of *_pinmux_init() into a single location.
The board-specific pinmux data is left in each board's own file. This
will allow future changes that set up the pinmux in a more complex
fashion to do so without duplicating that code in each board's pinmux
file.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:03:11 -08:00
Stephen Warren b49cae59e1 arm/tegra: Fix mistake in Trimslice's pinmux
Pin group PTA does not support function RSVD3. However, the current
pinmux driver doesn't check this when setting RSVD functions, and ends
up writing 3 to the HW register. 3 is actually represented by function
GMI, so update the pinmux table to request that instead in order to
obtain the same register programming without requesting invalid
configurations.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:03:10 -08:00
Stephen Warren 35957afc5d arm/tegra: Rework Seaboard-vs-Ventana pinmux table
Rather than modifying seaboard_pinmux[] using ventana_pinmux[], split
seaboard_pinmux[] into common_pinmux[] and seaboard_pinmux[], and then
actually apply common_pinmux[] always, followed by the appopriate one
of seaboard_pinmux[] or ventana_pinmux[].

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:03:10 -08:00
Stephen Warren 71d8f162ac arm/tegra: Remove useless entries from ventana_pinmux[]
Some of the entries in ventana_pinmux[] are identical to what's already in
seaboard_pinmux[]. Remove the overrides from the Ventana table.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:03:10 -08:00
Stephen Warren 809e092bfe arm/tegra: PCIe: Remove include of mach/pinmux.h
Nothing in this file needs this header.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:03:10 -08:00
Stephen Warren 6e96aca397 arm/tegra: Harmony PCIe: Don't touch pinmux
The Harmony pinmux table is already set up to mux the PCIe signals onto
the appropriate pin groups. Don't manually fiddle with the pinmux in the
Harmony PCIe setup code.

Merge note: This will have a merge conflict with Peter De Schrijver's
"arm/tegra: prepare pinmux code for multiple tegra variants" due to
context. When merging the two, make sure to also remove the include
of <mach/pinmux-tegra20.h> that his patch added, since it's no longer
needed after this patch.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:03:10 -08:00
Stephen Warren 1a4a30c849 arm/tegra: Add AUXDATA for tegra-pinmux and tegra-gpio
The pinctrl device name is included in the pinctrl map table, and used
as a parameter to pin_config_*() functions. Hence, it must be the same
for non-DT and DT kernels. Add AUXDATA to cause this.

The GPIO device name will be used by the pinmux/GPIO initialization code
in a later patch, and needs to stay constant.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:03:10 -08:00
Mark Brown f5a26f8915 gpiolib: Mark da9052 driver broken
The driver was merged prior to the MFD and won't build with the MFD.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 02:02:54 +00:00
Stephen Warren 439c660c29 arm/tegra: Split Seaboard GPIO table to allow for Ventana
Seaboard and Ventana share some GPIOs, but others are different. Split the
GPIO table into common, seaboard-specific, and ventana-specific tables, so
that only the correct ones are enabled for each board. Add a few missing
audio-related GPIOs for Ventana.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 18:02:48 -08:00
Olof Johansson 256a32eacf arm/tegra: refresh defconfig for tegra30
Update the defconfig for tegra due to the addition of tegra30 and rename
of t20/t30 options.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Stephen Warren <swarren@nvidia.com>
2011-12-19 18:00:03 -08:00
Stephen Warren f0d143065c arm/tegra: Seaboard: Add GPIO key device tree nodes
This brings all the GPIO key definitions from board-seaboard.c into
tegra-seaboard.dtsi.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 17:59:21 -08:00
Stephen Warren 401c9a50e7 arm/dt: Add ADT7461 to Seaboard
The ADT7461 is a temperature monitoring IC. One is present on the DVC
I2C bus on Seaboard.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 17:54:54 -08:00
Stephen Warren 0bc2ecb6e5 arm/dt: tegra: Use new compatible value for DVC I2C controller
Update the device tree to indicate which I2C controller is the DVC
controller. AUXDATA needs to be updated too, since the compatible
value changed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 17:54:53 -08:00
Stephen Warren 68fb669554 i2c: tegra: Support DVC controller in device tree
One of the Tegra I2C blocks is inside the DVC (Digital Voltage Controller)
block. This block is identical to the rest of the I2C blocks, except that
it only supports master mode, it has registers moved around, and it needs
some extra init to get it into I2C mode.  The register moves are handled
by i2c_readl and i2c_writel

This patch adds a new compatible value for controllers of this "DVC"
type; I figured that this approach was reasonable, as opposed to adding
an is-dvc property under the existing compatible value, since the HW
truly is different.

v2: Call of_device_is_compatible() to determine is_dvc, instead of storing
the flag in tegra_i2c_of_match[]'s .data field.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 17:54:20 -08:00
Stephen Warren 92891da11a i2c: tegra: Add __devinit/exit to probe/remove
This fixes some section mismatch build warnings.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 17:54:20 -08:00
Stephen Warren 07cdf36d8c ASoC: Tegra+WM8903 machine: Add device tree binding
This driver is parameterized in two ways:

a) Platform data, which supplies the set of GPIOs used by the driver.
   These GPIOs can now be parsed out of device tree.

b) Machine-specific DAPM route arrays embedded into the ASoC machine
   driver itself. Historically, the driver picks the appropriate array
   to use using machine_is_*(). The driver now requires this array to
   be parsed from device tree when instantiated through device tree,
   using the core ASoC support for this parsing.

Based on work by John Bonesio, but significantly reworked since then.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 01:05:34 +00:00
Stephen Warren a4a54dd5bb ASoC: Add utility to parse DAPM routes from device tree
Implement snd_soc_of_parse_audio_routing(), a utility function that can
parses a simple DAPM route table from device tree.The machine driver
specifies the DT property to use, since this is binding-specific.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 01:05:34 +00:00
Stephen Warren bec4fa05e2 ASoC: Add utility to set a card's name from device tree
Implement snd_soc_of_parse_card_name(), a utility function that sets a
card's name from device tree. The machine driver specifies the DT
property to use, since this is binding-specific.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 01:05:34 +00:00
Axel Lin 6048ef768e ASoC: Rename rt562[1|2]_vol_snd_controls to alc562[1|2]_vol_snd_controls
The module desciption says this is ASoC alc5621/2/3 driver.
Make the naming consistent with the reset of the code.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 00:58:08 +00:00
Mark Brown 0a1fe66698 Merge branch 'for-3.2' into for-3.3 2011-12-20 00:53:23 +00:00
Axel Lin f49f85108b ASoC: Use dai_fmt in snappercl15 machine driver
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 00:52:13 +00:00
Axel Lin f521812b03 ASoC: Use dai_fmt in edb93xx machine driver
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Alexander Sverdlin <subaparts@yandex.ru>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 00:51:59 +00:00
Shawn Guo dbec3b30a6 ASoC: mxs: correct 'direction' of device_prep_dma_cyclic
The commit 49920bc (dmaengine: add new enum dma_transfer_direction)
changes the type of parameter 'direction' of device_prep_dma_cyclic
from dma_data_direction to dma_transfer_direction.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 00:49:33 +00:00
Axel Lin 5ab2ab6a43 ASoC: Remove export of s3c_pcm_dai
We don't need to export s3c_pcm_dai after multi-component patch.
Thus remove export of s3c_pcm_dai and make it static.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 00:48:13 +00:00
Leon Romanovsky 58783faf28 ASoC: Tegra machine ASoC driver for boards using ALC5332 codec
At this stage only Toshiba AC100/Dynabook supported.

Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Andrey Danin <danindrey@mail.ru>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 00:41:29 +00:00
Axel Lin 58fa8e456c ASoC: Convert uda1380 to table based DAPM and control init
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 00:32:24 +00:00
Axel Lin 5ee65ec628 ASoC: Convert max9850 to table based DAPM and control init
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20 00:32:24 +00:00
Rusty Russell 61074287c2 mmc: vub300: fix type of firmware_rom_wait_states module parameter
You didn't mean this to be a bool.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tony Olech <tony.olech@elandigitalsystems.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-19 15:56:09 -08:00
Ohad Ben-Cohen 5c7f0e083d Revert "mmc: enable runtime PM by default"
When SDIO runtime PM was originally introduced, we immediately faced
two regressions with two different chipsets, and in response decided
not to enable it by default.

With the recent work on the 8686 we hoped we found all the gotchas,
so 08da834 did make sense (at least experimentally).

Unfortunately we now see that some setups out there still refuse to
work when SDIO runtime PM is enabled by default (see
http://www.spinics.net/lists/linux-mmc/msg11161.html), and obviously
we can't live with these kind of regressions.

This reverts commit 08da834a24.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-19 15:51:38 -08:00
Manuel Lauss 29495aa04a mmc: sdhci: remove "state" argument from sdhci_suspend_host
Drop the "state" argument from sdhci_suspend_host.  Its only user is the
PCI glue;  this allows to move all SDHCI glues to use dev_pm_ops instead.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-19 15:50:11 -08:00
Vaibhav Hiremath 4de34f3572 ARM: OMAP2+: split omap2/3/4_check_revision function
We need to detect the SoC revision early, but the SoC
feature detection can be done later on. In order to allow
further clean-up later on, this patch separates the SoC
revision check from the SoC feature check.

This patch doesn't change functionality or behavior of the code
execution; it barely cleans up the code and splits into SoC
specific implementation for Rev ID and feature detection.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-19 15:47:14 -08:00
Vaibhav Hiremath 50a01e6440 ARM: OMAP2+: Make cpu_rev static global variable
As part of omap revision code cleanup, make cpu_rev
variable static global to the file (id.c). This is
needed so we can split the SoC detection from SoC
feature detection in the following patch. Also move
omap3_cpuinfo function a bit as that will be shared
by other omap3 like SoCs.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-19 15:40:54 -08:00
Linus Torvalds 511585a28e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/qib: Correct sense on freectxts increment and decrement
  RDMA/cma: Verify private data length
  IB/mlx4: Fix shutdown crash accessing a non-existent bitmap
2011-12-19 15:13:53 -08:00
Linus Torvalds 64edb05e3c Merge branch 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix per_cpu_ptr_to_phys() handling of non-page-aligned addresses
2011-12-19 15:13:36 -08:00
Linus Torvalds 10ee08b757 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - fix touchpad not working after S2R on Vostro V13
  Input: cma3000_d0x - fix signedness bug in cma3000_thread_irq()
  Input: wacom - add product id used by Samsung Slate 7
2011-12-19 15:11:12 -08:00
Kees Cook 114d6e9c10 security: update security_file_mmap() docs
This documents the fields added to security_file_mmap() that were
introduced in ed03218951.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <jmorris@namei.org>
2011-12-20 09:36:23 +11:00
Russell King df0bcfe0f8 Merge branch 'arm/common-kconfig-refactor+for-rmk' of git://git.linaro.org/people/dmart/linux-2.6-arm into devel-stable 2011-12-19 21:54:35 +00:00
Benoit Cousson 88af7f58c6 of/base: Take NULL string into account for property with multiple strings
The current implementation just ignore any NULL string inserted in a
multiple strings property.
In some cases we can have a property with a fix number of strings but
not necessarily used, like for example in a list of valid pinmux modes.

 prop = "uart_rx", "uart_tx", "", "", "safe_mode";

Do no skip NULL string and take them into account in
of_property_read_string_index and of_property_count_strings.

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-12-19 15:40:11 -06:00
David Daney 44ad56b7df OF/device-tree: Add some entries to vendor-prefixes.txt
We are currently using 'cavium', 'cortina' and 'st', add them to the
list of known prefixes.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-12-19 15:39:46 -06:00
Aurelien Jacobs e8303a3b21 asix: new device id
Adds the device id needed for the USB Ethernet Adapter delivered by
ASUS with their Zenbook.

Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Acked-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19 16:37:56 -05:00
Venkataraman, Meenakshi 885765f148 iwlwifi: Execute runtime calibration always
Runtime DC calibration was previously conditional. Remove this
behaviour, as new devices support runtime DC calibration,
while older devices ignore the runtime DC calibration request.

This patch addresses low TX throughput issues seen with the 6205.

Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-19 13:33:57 -08:00
Wey-Yi Guy fb6c1c6c35 iwlwifi: use bus_get_hw_id for IWL_TM_CMD_APP2DEV_GET_DEVICE_ID
instead of doing all the work in IWL_TM_CMD_APP2DEV_GET_DEVICE_ID, just use
the information from bus_get_hw_id()

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-19 13:33:52 -08:00
Wey-Yi Guy 0ba958ebf1 iwlwifi: set hw_version in wiphy
Set the hw_version in wiphy structure

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-19 13:33:46 -08:00
Wey-Yi Guy 62e731695d iwlwifi: deliver hw version in both string and u32 format
Add function to get hw version in both strind and u32 format

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-19 13:33:39 -08:00
Ilya Yanok 7746ab0abb davinci-cpdma: fix locking issue in cpdma_chan_stop
Free the channel lock before calling __cpdma_chan_process to prevent
dead lock.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Tested-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19 16:31:13 -05:00