Commit Graph

480699 Commits

Author SHA1 Message Date
Pavel Shilovsky 038bc961c3 CIFS: Fix async reading on reconnects
If we get into read_into_pages() from cifs_readv_receive() and then
loose a network, we issue cifs_reconnect that moves all mids to
a private list and issue their callbacks. The callback of the async
read request sets a mid to retry, frees it and wakes up a process
that waits on the rdata completion.

After the connection is established we return from read_into_pages()
with a short read, use the mid that was freed before and try to read
the remaining data from the a newly created socket. Both actions are
not what we want to do. In reconnect cases (-EAGAIN) we should not
mask off the error with a short read but should return the error
code instead.

Acked-by: Jeff Layton <jlayton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-08-02 01:23:01 -05:00
Michal Kazior dc55e3074c ath10k: improve channel switching
In some cases during heavy tx vdev stop-start
would timeout on vdev synchronization causing
traffic to stall for a few seconds.

Instead of stop-starting use a dedicated vdev
restart command and down vdevs explicitly before
doing so.

This gets rid of the synchronization
warnings/timeouts and makes channel switching
smoother during traffic.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-02 09:11:22 +03:00
Linus Torvalds 1f2609460c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
 "This contains a couple of fixes - one is the aio fix from Christoph,
  the other a fallocate() one from Eric"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: fix check for fallocate on active swapfile
  direct-io: fix AIO regression
2014-08-01 18:01:41 -07:00
Linus Torvalds f88cf230a4 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Peter Anvin:
 "A single fix to not invoke the espfix code on Xen PV, as it turns out
  to oops the guest when invoked after all.  This patch leaves some
  amount of dead code, in particular unnecessary initialization of the
  espfix stacks when they won't be used, but in the interest of keeping
  the patch minimal that cleanup can wait for the next cycle"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64/entry/xen: Do not invoke espfix64 on Xen
2014-08-01 17:37:01 -07:00
Linus Torvalds ecb679fc2c Merge tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver bugfixes from Greg KH:
 "Here are some tiny staging driver bugfixes that I've had in my tree
  for the past week that resolve some reported issues.  Nothing major at
  all, but it would be good to get them merged for 3.16-rc8 or -final"

* tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt6655: Fix disassociated messages every 10 seconds
  staging: vt6655: Fix Warning on boot handle_irq_event_percpu.
  staging: rtl8723au: rtw_resume(): release semaphore before exit on error
  iio:bma180: Missing check for frequency fractional part
  iio:bma180: Fix scale factors to report correct acceleration units
  iio: buffer: Fix demux table creation
2014-08-01 17:16:05 -07:00
xinhui.pan 5a64096700 tty/n_gsm.c: fix a memory leak in gsmld_open
If gsmld_attach_gsm fails, the gsm is not used anymore.
tty core will not call gsmld_close to do the cleanup work.
tty core just restore to the tty old ldisc.
That always causes memory leak.

Signed-off-by: xinhui.pan <xinhuiX.pan@intel.com>
Reported-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 16:04:54 -07:00
Andy Shevchenko 8368d6a2b7 pch_uart: don't hardcode PCI slot to get DMA device
The DMA is a function 0 of the multifunction device where SPI host is attached.
Thus, we may avoid to hardcode PCI slot number.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 16:04:21 -07:00
Jiri Slaby c62fd1d9f0 tty: n_gsm, use setup_timer
Just a simple cleanup of init_timer with setting the fields manually.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 16:04:21 -07:00
Pawel Moll 4e3a25b027 ARM: imx: Remove references to platform_bus in mxc code
The bus devices created to be parents for other peripherals
were using platform_bus as a parent, not being platform
devices themselves. Remove the references, making them
virtual devices instead.

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 16:03:00 -07:00
Oliver Neukum d310d05f12 USB: devio: fix issue with log flooding
usbfs allows user space to pass down an URB which sets URB_SHORT_NOT_OK
for output URBs. That causes usbcore to log messages without limit
for a nonsensical disallowed combination. The fix is to silently drop
the attribute in usbfs.
The problem is reported to exist since 3.14
https://www.virtualbox.org/ticket/13085

Signed-off-by: Oliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 16:01:46 -07:00
Hans de Goede 43508be512 uas: Log a warning when we cannot use uas because the hcd lacks streams
So that an user who wants to use uas can see why he is not getting uas.

Also move the check down so that we don't warn if there are other reasons
why uas cannot work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 16:00:14 -07:00
Hans de Goede cc4deafc86 uas: Only complain about missing sg if all other checks succeed
Don't complain about controllers without sg support if there are other
reasons why uas cannot be used anyways.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:59:47 -07:00
Hans de Goede a0ee619f3c xhci: Add missing checks for xhci_alloc_command failure
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:58:59 -07:00
Hans de Goede 170625e994 xhci: Rename Asrock P67 pci product-id to EJ168
The 7023 product id is the generic product id for the Etron EJ168, it is
not specific to the version found on the Asrock P67 motherboard. The same id
is e.g. also used on Gigabyte motherboards and on no-name pci-e usb-3 addon
cards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:49:34 -07:00
Hans de Goede 8f873c1ff4 xhci: Blacklist using streams on the Etron EJ168 controller
Streams on the EJ168 do not work as they should. I've spend 2 days trying
to get them to work, but without success.

The first problem is that when ever you ring the stream-ring doorbell, the
controller starts executing trbs at the beginning of the first ring segment,
event if it ended somewhere else previously. This can be worked around by
allowing enqueing only one td (not a problem with how streams are typically
used) and then resetting our copies of the enqueueing en dequeueing pointers
on a td completion to match what the controller seems to be doing.

This way things seem to start working with uas and instead of being able
to complete only the very first scsi command, the scsi core can probe the disk.

But then things break later on when td-s get enqueued with more then one
trb. The controller does seem to increase its dequeue pointer while executing
a stream-ring (data transfer events I inserted for debugging do trigger).
However execution seems to stop at the final normal trb of a multi trb td,
even if there is a data transfer event inserted after the final trb.

The first problem alone is a serious deviation from the spec, and esp.
dealing with cancellation would have been very tricky if not outright
impossible, but the second problem simply is a deal breaker altogether,
so this patch simply disables streams.

Note this will cause the usb-storage + uas driver pair to automatically switch
to using usb-storage instead of uas on these devices, essentially reverting
to the 3.14 and earlier behavior when uas was marked CONFIG_BROKEN.

https://bugzilla.redhat.com/show_bug.cgi?id=1121288
https://bugzilla.kernel.org/show_bug.cgi?id=80101

Cc: stable@vger.kernel.org # 3.15
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:49:34 -07:00
Hans de Goede e2875c3378 uas: Limit qdepth to 32 when connected over usb-2
Some jmicron uas chipsets act up (they disconnect from the bus) when sending
more then 32 commands to them at once.

Rather then building an ever growing list with usb-id based quirks for
devices using this chipset, simply reduce the qdepth to 32 when connected
over usb-2. 32 should be plenty to keep things close to maximum
possible throughput on usb-2.

Cc: stable@vger.kernel.org
Tested-and-reported-by: Laszlo T. <tlacix@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:48:08 -07:00
Julia Lawall 3dbef993c0 uwb/whci: use correct structure type name in sizeof
Correct typo in the name of the type given to sizeof.  Because it is the
size of a pointer that is wanted, the typo has no impact on compilation or
execution.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).  The
semantic patch used can be found in message 0 of this patch series.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:48:08 -07:00
James P Michels III cd83ce9e61 usb-core bInterval quirk
This patch adds a usb quirk to support devices with interupt endpoints
and bInterval values expressed as microframes. The quirk causes the
parse endpoint function to modify the reported bInterval to a standards
conforming value.

There is currently code in the endpoint parser that checks for
bIntervals that are outside of the valid range (1-16 for USB 2+ high
speed and super speed interupt endpoints). In this case, the code assumes
the bInterval is being reported in 1ms frames. As well, the correction
is only applied if the original bInterval value is out of the 1-16 range.

With this quirk applied to the device, the bInterval will be
accurately adjusted from microframes to an exponent.

Signed-off-by: James P Michels III <james.p.michels@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:47:05 -07:00
Patrick Riphagen 4bdcde358b USB: serial: ftdi_sio: Add support for new Xsens devices
This adds support for new Xsens devices, using Xsens' own Vendor ID.

Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:47:05 -07:00
Patrick Riphagen 9273b8a270 USB: serial: ftdi_sio: Annotate the current Xsens PID assignments
The converters are used in specific products. It can be useful to know
which they are exactly.

Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:47:05 -07:00
Chase Southwood b9aaea39f6 staging: comedi: addi_apci_1564: remove diagnostic interrupt support code
As per Ian, at this point in time it is not worth implementing an async
command interface for diagnostic interrupts for this board.  As this is
the case, this patch removes the code which supports such interrupts as it
is now unused.

This includes removing apci1564_do_read(), which was the insn_read
operation for the digital output subdevice, since all it was doing was
reading the current diagnostic interrupt type and returning it in 'data'.
This doesn't follow the comedi API and this operation can be emulated by
the comedi core anyway since the insn_bits operation follows the comedi
API.  So it is safe to simply remove this function.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:37:22 -07:00
Chase Southwood 6347fc88ec staging: comedi: addi_apci_1564: add subdevice to check diagnostic status
This board provides VCC/CC diagnostic information, and it also supports
diagnostic interrupts.  However, as per Ian, these interrupts aren't very
useful and it is enough to simply provide an interface for accessing the
diagnostic status on-demand.  This patch adds a 2-channel digital input
subdevice with an insn_bits handler to access this information.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 15:37:22 -07:00
Bart Van Assche e714531a34 IB/srp: Fix residual handling
From Documentation/scsi/scsi_mid_low_api.txt: "resid - an LLD should
set this signed integer to the requested transfer length (i.e.
'request_bufflen') less the number of bytes that are actually
transferred."  This means that resid > 0 in case of an underrun and
also that resid < 0 in case of an overrun.  Modify the SRP initiator
code such that it matches this requirement.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: David Dillow <dave@thedillows.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:21:51 -07:00
Bart Van Assche bcc0591035 IB/srp: Fix deadlock between host removal and multipathd
If scsi_remove_host() is invoked after a SCSI device has been blocked,
if the fast_io_fail_tmo or dev_loss_tmo work gets scheduled on the
workqueue executing srp_remove_work() and if an I/O request is
scheduled after the SCSI device had been blocked by e.g. multipathd
then the following deadlock can occur:

    kworker/6:1     D ffff880831f3c460     0   195      2 0x00000000
    Call Trace:
     [<ffffffff814aafd9>] schedule+0x29/0x70
     [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0
     [<ffffffff8105af6f>] msleep+0x2f/0x40
     [<ffffffff8123b0ae>] __blk_drain_queue+0x4e/0x180
     [<ffffffff8123d2d5>] blk_cleanup_queue+0x225/0x230
     [<ffffffffa0010732>] __scsi_remove_device+0x62/0xe0 [scsi_mod]
     [<ffffffffa000ed2f>] scsi_forget_host+0x6f/0x80 [scsi_mod]
     [<ffffffffa0002eba>] scsi_remove_host+0x7a/0x130 [scsi_mod]
     [<ffffffffa07cf5c5>] srp_remove_work+0x95/0x180 [ib_srp]
     [<ffffffff8106d7aa>] process_one_work+0x1ea/0x6c0
     [<ffffffff8106dd9b>] worker_thread+0x11b/0x3a0
     [<ffffffff810758bd>] kthread+0xed/0x110
     [<ffffffff814b972c>] ret_from_fork+0x7c/0xb0
    multipathd      D ffff880096acc460     0  5340      1 0x00000000
    Call Trace:
     [<ffffffff814aafd9>] schedule+0x29/0x70
     [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0
     [<ffffffff814ab79b>] io_schedule_timeout+0x9b/0xf0
     [<ffffffff814abe1c>] wait_for_completion_io_timeout+0xdc/0x110
     [<ffffffff81244b9b>] blk_execute_rq+0x9b/0x100
     [<ffffffff8124f665>] sg_io+0x1a5/0x450
     [<ffffffff8124fd21>] scsi_cmd_ioctl+0x2a1/0x430
     [<ffffffff8124fef2>] scsi_cmd_blk_ioctl+0x42/0x50
     [<ffffffffa00ec97e>] sd_ioctl+0xbe/0x140 [sd_mod]
     [<ffffffff8124bd04>] blkdev_ioctl+0x234/0x840
     [<ffffffff811cb491>] block_ioctl+0x41/0x50
     [<ffffffff811a0df0>] do_vfs_ioctl+0x300/0x520
     [<ffffffff811a1051>] SyS_ioctl+0x41/0x80
     [<ffffffff814b9962>] tracesys+0xd0/0xd5

Fix this by scheduling removal work on another workqueue than the
transport layer timers.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: David Dillow <dave@thedillows.org>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:21:51 -07:00
Bart Van Assche cd53eb686d scsi_transport_srp: Fix fast_io_fail_tmo=dev_loss_tmo=off behavior
If scsi_remove_host() is called while an rport is in the blocked state
then scsi_remove_host() will only finish if the rport is unblocked
from inside a timer function. Make sure that an rport only enters the
blocked state if a timer will be started that will unblock it. This
avoids that unloading the ib_srp kernel module after having
disconnected the initiator from the target system results in a
deadlock if both the fast_io_fail_tmo and dev_loss_tmo parameters have
been set to "off".

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: David Dillow <dave@thedillows.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:21:51 -07:00
Matan Barak 9376932d0c IB/mlx4_ib: Add support for user MR re-registration
This enables the user to change the protection domain, access flags
and translation (address and length) of the MR.

Use basic mlx4_core helper functions to get, update and set MPT and
MTT objects according to the required modifications.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:11:13 -07:00
Matan Barak e630664c83 mlx4_core: Add helper functions to support MR re-registration
Add few helper functions to support a mechanism of getting an MPT,
modifying it and updating the HCA with the modified object.

The code takes 2 paths, one for directly changing the MPT (and
sometimes its related MTTs) and another one which queries the MPT and
updates the HCA via fw command SW2HW_MPT. The first path is used in
native mode; the second path is slower and is used only in SRIOV.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:11:13 -07:00
Matan Barak 7e6edb9b2e IB/core: Add user MR re-registration support
Memory re-registration is a feature that enables changing the
attributes of a memory region registered by user-space, including PD,
translation (address and length) and access flags.

Add the required support in uverbs and the kernel verbs API.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:11:13 -07:00
Roi Dayan 8d4aca7f04 IB/iser: Clarify a duplicate counters check
This is to prevent someone from thinking that this code section is
redundant.

Signed-off-by: Ariel Nahum <arieln@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:10:05 -07:00
Ariel Nahum 9a6d3234a1 IB/iser: Replace connection waitqueue with completion object
Instead of waiting for events and condition changes of the iser
connection state, we wait for explicit completion of connection
establishment and teardown.

Separate connection establishment wait object from the teardown object
to avoid a situation where racing connection establishment and
teardown may concurrently wakeup each other.

ep_poll will wait for up_completion invoked by
iser_connected_handler() and iser release worker will wait for
flush_completion before releasing the connection.

Bound the completion wait with a 30 seconds timeout for cases where
iscsid (the user space iscsi daemon) is too slow or gone.

Signed-off-by: Ariel Nahum <arieln@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:10:05 -07:00
Ariel Nahum 504130c039 IB/iser: Protect iser state machine with a mutex
The iser connection state lookups and transitions are not fully protected.

Some transitions are protected with a spinlock, and in some cases the
state is accessed unprotected due to specific assumptions of the flow.

Introduce a new mutex to protect the connection state access. We use a
mutex since we need to also include a scheduling operations executed
under the state lock.

Each state transition/condition and its corresponding action will be
protected with the state mutex.

The rdma_cm events handler acquires the mutex when handling connection
events. Since iser connection state can transition to DOWN
concurrently during connection establishment, we bailout from
addr/route resolution events when the state is not PENDING.

This addresses a scenario where ep_poll retries expire during CMA
connection establishment. In this case ep_disconnect is invoked while
CMA events keep coming (address/route resolution, connected, etc...).

Signed-off-by: Ariel Nahum <arieln@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:10:05 -07:00
Sagi Grimberg f1a8bf0983 IB/iser: Remove redundant return code in iser_free_ib_conn_res()
Make it void.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:10:04 -07:00
Ariel Nahum 0a6907588a IB/iser: Seperate iser_conn and iscsi_endpoint storage space
iser connection needs asynchronous cleanup completions which are
triggered in ep_disconnect.  As a result we are keeping the
corresponding iscsi_endpoint structure hanging for no good reason. In
order to avoid that, we seperate iser_conn from iscsi_endpoint storage
space to have their destruction being independent.

iscsi_endpoint will be destroyed at ep_disconnect stage, while the
iser connection will wait for asynchronous completions to be released
in an orderly fashion.

Signed-off-by: Ariel Nahum <arieln@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:10:04 -07:00
Sagi Grimberg 2ea32938f3 IB/iser: Fix responder resources advertisement
The iser initiator is the RDMA responder so it should publish to the
target the max inflight rdma read requests its local HCA can handle in
responder_resources (max_qp_rd_atom).

The iser target should take the min of that and its local HCA max
inflight oustanding rdma read requests (max_qp_init_rd_atom).

We keep initiator_depth set to 1 in order to compat with old targets.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:10:04 -07:00
Roi Dayan 9579d60350 IB/iser: Add TIMEWAIT_EXIT event handling
In case the DISCONNECTED event is not delivered after rdma_disconnect
is called, the CM waits TIMEWAIT seconds and delivers the
TIMEWAIT_EXIT local event. We use this as the notification needed to
continue in the teardown and release sequence.

Signed-off-by: Ariel Nahum <arieln@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:10:04 -07:00
Roi Dayan 96ed02d4be IB/iser: Support IPv6 address family
Replace struct sockaddr_in with struct sockaddr which supports both
IPv4 and IPv6, and print using the %pIS format directive.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:10:04 -07:00
H. Peter Anvin 5e3bf215f4 x86/apic/vsmp: Make is_vsmp_box() static
Since checkin

411cf9ee29 x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()

... is_vsmp_box() is only used in vsmp_64.c and does not have any
header file declaring it, so make it explicitly static.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Shai Fultheim <shai@scalemp.com>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1404036068-11674-1-git-send-email-oren@scalemp.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-08-01 15:09:45 -07:00
Selvin Xavier 741742ed71 RDMA/ocrdma: Update the ocrdma module version string
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:50 -07:00
Selvin Xavier 1b09a0c290 RDMA/ocrdma: Fix a sparse warning
Fix the warning about the usage of plain integer as NULL pointer.

Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:49 -07:00
Selvin Xavier b8806324ea RDMA/ocrdma: Initialize the GID table while registering the device
Current GID table gets updated only at the time of inet notification.
Fix this by initializing the table at the time of device registration.

Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:49 -07:00
Selvin Xavier 4f1df8440d RDMA/ocrdma: Increase the size of STAG array in dev structure to 16K
HW can support 16K STAG entries.  Change this max limit.  Also, move
this array out of ocrdma_dev to reduce the size of this structure.

Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:49 -07:00
Selvin Xavier 920de55d40 RDMA/ocrdma: Add missing adapter mailbox opcodes
Fix the Statistics command opcode. Also specify the opcode of each
command for better readablilty.

Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:46 -07:00
Mitesh Ahuja 033edd4dff RDMA/ocrdma: Return proper value for max_mr_size
Update the max_mr_size with proper value. Corrected the response
structure of query config mailbox command.

Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.Com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:37 -07:00
Mitesh Ahuja 6dab02648c RDMA/ocrdma: Do proper cleanup even if FW is in error state
If any mailbox command reports timeout, save the state in the driver,
to prevent issuing any more commands to the HW.  Do proper cleanup
even if FW is in error state.

Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.Com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:36 -07:00
Mitesh Ahuja f252b5dc36 RDMA/ocrdma: Allow only SEND opcode in case of UD QPs
Prevent posting opcodes other than send and send immediate on the UD QPs.

Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.Com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:36 -07:00
Selvin Xavier a96ffb1de9 RDMA/ocrdma: Avoid reporting wrong completions in case of error CQEs
During cable pull test with a mount over NFS/RDMA, the driver was
reporting error completions when there were no pending requests in the
SQ and RQ.  This was triggering a host crash because of reporting
wrong work req id.  Avoid this crash by adding a check for SQ and RQ
empty condition and prevent reporting completions if queues are empty.

Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:36 -07:00
Devesh Sharma daac96815e RDMA/ocrdma: Delete AH table if ocrdma_init_hw fails after AH table creation
Cleanup the AH table in error path, if HW initialization fails
after AH table creation.

Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:36 -07:00
Devesh Sharma a53d77a334 RDMA/ocrdma: Remove hardcoding of the max DPP QPs supported
Removing hardcoded value of max dpp qps and calculate the same from
doorbell page size and WQE size.

Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:36 -07:00
Devesh Sharma efe4593720 RDMA/ocrdma: Handle shutdown event from be2net driver
be2net driver sends a shutdown event to ocrdma during shutdown/reboot.
As part of event processing, ocrdma calls close() and remove() to free
all the resources associated with ocrdma. This also frees irqs used by
ocrdma.

Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:36 -07:00
Devesh Sharma d114f99a29 be2net: Issue shutdown event to ocrdma driver
In the shutdown path, when be2net calls pci_disable_msix(), it
complains (BUG_ON) that irqs requested by ocrdma driver are still in
use.  This patch fixes this problem by issuing shutdown event to
ocrdma from be2net shutdown path.  As part of shutdown event
processing, ocrdma driver will free up all the resources and free
irqs.  Once this completes be2net completes pci_disable_msix
successfully.

Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01 15:07:36 -07:00