Commit Graph

480699 Commits

Author SHA1 Message Date
Mark Brown 7e322dff36 ASoC: wm8750: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:47:11 +01:00
Mark Brown 34967ad242 ASoC: wm8741: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:47:07 +01:00
Mark Brown a5d0de23b2 ASoC: wm8737: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:47:04 +01:00
Mark Brown dfb6778e64 ASoC: wm8731: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:47:00 +01:00
Mark Brown 9fbad31a9e ASoC: wm8728: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:46:57 +01:00
Mark Brown b9abb54856 ASoC: wm8711: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:46:51 +01:00
Mark Brown 993ba8e595 ASoC: wm8580: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:46:48 +01:00
Mark Brown 3fafcc8e61 ASoC: wm8523: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:46:45 +01:00
Mark Brown 19e4b7886b ASoC: wm8510: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:46:40 +01:00
Mark Brown 6fe12c2fbb ASoC: wm8400: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:46:35 +01:00
Mark Brown 1e6453acda ASoC: wm8350: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:46:32 +01:00
Rafał Miłecki dc6be9f54a bcma: use NS prefix for names of Northstar specific cores
It's cleaner and we don't have quite identical names like
BCMA_CORE_PCIEG2 and BCMA_CORE_PCIE2.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:45:32 -04:00
Rafał Miłecki 11d14c7921 b43: N-PHY: fix "Data bus error" while working in 5 GHz
When switching from one 5 GHz channel to another 5 GHz channel we need
to make sure BPHY is still in a reset. However to access BPHY register
we have to switch to 2 GHz mode for a moment. Otherwise this may result
in "Data bus error" (noticed by Hauke with BCM43224 connected to the
SoC).

Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:45:31 -04:00
Bing Zhao b9d317040a MAINTAINERS: update for mwifiex driver maintainers
Amitkumar and Avinash are taking care of mwifiex driver as the
maintainers now due to organizational change.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:45:30 -04:00
Rafał Miłecki ed7f75b4f0 b43: update PHY descriptions in Kconfig
Add lists of chipsets, so people can enable support for their device
easier (at least after checking lspci).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:45:30 -04:00
Hante Meuleman 70b7d94bcc brcmfmac: Add TDLS support to msgbuf.
TDLS connections require dedicated flowrings. This patches adds
TDLS event handling and flowring creation/deletion based on these
events.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:45:29 -04:00
Hante Meuleman 17ca5c7184 brcmfmac: Fix msgbuf flow control.
Msgbuf flow control was using a function to flow off and on which
was not supported without proptx enabled. Also flow control needs
to be handled per ifidx.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:45:28 -04:00
Hante Meuleman bd4f82e3b2 brcmfmac: Update pcie reset device routine.
When a pcie device gets reset then the low power modes l1 and l2
should be temporarily disabled.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:45:27 -04:00
Hante Meuleman 9e37f045d5 brcmfmac: Adding PCIe bus layer support.
This patch will add PCIe support. With this patch the PCIe chipsets
43602, 4354, 4356, 43567, and 43570 will be supported.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:45:26 -04:00
Hante Meuleman 9a1bb60250 brcmfmac: Adding msgbuf protocol.
This patch will add the msgbuf protocol. This protocol is used by
the soon to be added new bus interface PCIe. Msgbuf is a protocol
where most data is and remains located on the host (driver) side
and transferred by DMA from and to device. Msgbuf is the protocol
which takes care of the signalling of the buffers between host and
device which identifies this DMA-able data.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:45:26 -04:00
Hante Meuleman 8851cce085 brcmfmac: Add protocol addressing mode and peer deletion API.
The soon to be added protocol msgbuf requires information about
interface addressing mode and peer deletion. This patch adds the
necessary APIs to proto, implements dummy functions in BCDC and
adds calls to proto wherever necessary by wl_cfg80211.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:41:45 -04:00
Hante Meuleman 9374a2b514 brcmfmac: Export brcmf_netif_rx for new protocol msgbuf.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:41:45 -04:00
Daniel Kim 46de06839b brcmfmac: Do not use strcpy and strcat
Commit "c1b2053 brcmfmac: Make firmware path a module parameter"
introduced use of strcpy and strcat. The strcpy and strcat require
using null terminated strings and can cause out-of-bounds memory
access and subsequent corruption. This patch replaces these by
strncpy and strncat respectively to assure array boundaries are
not crossed.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Daniel Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:41:44 -04:00
Julia Lawall 9f0b4cbdee iwlegacy: use correct structure type name in sizeof
Correct typo in the name of the type given to sizeof.  Because it is the
size of a pointer that is wanted, the typo has no impact on compilation or
execution.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).  The
semantic patch used can be found in message 0 of this patch series.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31 13:41:44 -04:00
Matt Rushton 3fbdf631b7 xen/setup: Remove Identity Map Debug Message
Removing a debug message for setting the identity map since it becomes
rather noisy after rework of the identity map code.

Signed-off-by: Matthew Rushton <mrushton@amazon.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-07-31 18:40:13 +01:00
Linus Torvalds 7c909b0937 Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux
Pull clock driver fix from Mike Turquette:
 "A single patch to re-enable audio which is broken on all DRA7
  SoC-based platforms.  Missed this one from the last set of fixes"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: ti: clk-7xx: Correct ABE DPLL configuration
2014-07-31 10:02:15 -07:00
Linus Torvalds 5196626dae Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
 "This adds missing SELinux labeling to AF_ALG sockets which apparently
  causes SELinux (or at least the SELinux people) to misbehave :)"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: af_alg - properly label AF_ALG socket
2014-07-31 10:01:34 -07:00
Linus Torvalds 48418bb6e3 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI barrier fix from James Bottomley:
 "This is a potential data corruption fix: If we get an error sending
  down a barrier, we simply ignore it meaning the barrier semantics get
  violated without anyone being any the wiser.  If the system crashes at
  this point, the filesystem potentially becomes corrupt.  Fix is to
  report errors on failed barriers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: handle flush errors properly
2014-07-31 10:00:42 -07:00
Frediano Ziglio e4a7431240 xen/events/fifo: remove a unecessary use of BM()
Since 05a812ac47 (xen/events/fifo:
correctly align bitops), ready is an unsigned long instead of uint32_t
and the BM() macro is no longer required.

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-07-31 17:59:18 +01:00
David Vrabel dcecb8fd93 xen/events/fifo: ensure all bitops are properly aligned even on x86
When using the FIFO-based ABI on x86_64, if the last port is at the
end of an event array page then sync_test_bit() on this port's event
word will read beyond the end of the page and in certain circumstances
this may fault.

The fault requires the following page in the kernel's direct mapping
to be not present, which would mean:

a) the array page is the last page of RAM; or

b) the following page is ballooned out /and/ it has been used for a
   foreign mapping by a kernel driver (such as netback or blkback)
   /and/ the grant has been unmapped.

Use the infrastructure added for arm64 to ensure that all bitops
operating on event words are unsigned long aligned.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
2014-07-31 17:58:38 +01:00
David Vrabel c12784c3d1 xen/events/fifo: reset control block and local HEADs on resume
When using the FIFO-based event channel ABI, if the control block or
the local HEADs are not reset after resuming the guest may see stale
HEAD values and will fail to traverse the FIFO correctly.

This may prevent one or more VCPUs from receiving any events following
a resume.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
2014-07-31 17:58:21 +01:00
Trond Myklebust 11b9164ada nfsd: Add a struct nfs4_file field to struct nfs4_stid
All stateids are associated with a nfs4_file. Let's consolidate.
Replace delegation->dl_file with the dl_stid.sc_file, and
nfs4_ol_stateid->st_file with st_stid.sc_file.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-07-31 12:51:34 -04:00
Trond Myklebust 6011695da2 nfsd: Add reference counting to the lock and open stateids
When we remove the client_mutex, we'll need to be able to ensure that
these objects aren't destroyed while we're not holding locks.

Add a ->free() callback to the struct nfs4_stid, so that we can
release a reference to the stid without caring about the contents.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-07-31 12:43:53 -04:00
Axel Lin 99765db299 hwmon: (lm77) Prevent overflow problem when writing large limits
On platforms with sizeof(int) < sizeof(long), writing a temperature
limit larger than MAXINT will result in unpredictable limit values
written to the chip.
Clamp the input values to the supported limits first to fix the problem.

For set_temp_hyst:
As Guenter pointed out that the temperature is read as unsigned and stored in
an unsigned long. This is wrong; nothing in the datasheet suggests that the
value (the absolute temperature) must be positive.
So change it to signed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-07-31 09:41:46 -07:00
Mike Turquette d7d3d26fa5 Merge tag 'for_3.17/samsung-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-next-samsung
Samsung clock patches for 3.17

1) non-critical fixes (without need to push to stable):

d5e136a clk: samsung: Register clk provider only after registering its all clocks
305cfab clk: samsung: Make of_device_id array const
e9d5295 clk: samsung: exynos5420: Setup clocks before system suspend
f65d518 clk: samsung: trivial: Correct typo in author's name

2) Exynos CLKOUT driver:

800c979 clk: samsung: exynos4: Add missing CPU/DMC clock hierarchy
01f7ec2 clk: samsung: exynos4: Add CLKOUT clock hierarchy
1e832e5 clk: samsung: Add driver to control CLKOUT line on Exynos SoCs
d19bb39 ARM: dts: exynos: Update PMU node with CLKOUT related data

3) Clock hierarchy extensions:

17d3f1d clk: exynos4: Add PPMU IP block source clocks.
ca5b402 clk: samsung: register exynos5420 apll/kpll configuration data

4) ARM CLKDOWN functionality enablement for Exynos4 and 3250:

42773b2 clk: samsung: exynos4: Enable ARMCLK down feature
45c5b0a clk: samsung: exynos3250: Enable ARMCLK down feature
2014-07-31 09:32:18 -07:00
Dave Hansen a5102476a2 x86/mm: Set TLB flush tunable to sane value (33)
This has been run through Intel's LKP tests across a wide range
of modern sytems and workloads and it wasn't shown to make a
measurable performance difference positive or negative.

Now that we have some shiny new tracepoints, we can actually
figure out what the heck is going on.

During a kernel compile, 60% of the flush_tlb_mm_range() calls
are for a single page.  It breaks down like this:

 size   percent  percent<=
  V        V        V
GLOBAL:   2.20%   2.20% avg cycles:  2283
     1:  56.92%  59.12% avg cycles:  1276
     2:  13.78%  72.90% avg cycles:  1505
     3:   8.26%  81.16% avg cycles:  1880
     4:   7.41%  88.58% avg cycles:  2447
     5:   1.73%  90.31% avg cycles:  2358
     6:   1.32%  91.63% avg cycles:  2563
     7:   1.14%  92.77% avg cycles:  2862
     8:   0.62%  93.39% avg cycles:  3542
     9:   0.08%  93.47% avg cycles:  3289
    10:   0.43%  93.90% avg cycles:  3570
    11:   0.20%  94.10% avg cycles:  3767
    12:   0.08%  94.18% avg cycles:  3996
    13:   0.03%  94.20% avg cycles:  4077
    14:   0.02%  94.23% avg cycles:  4836
    15:   0.04%  94.26% avg cycles:  5699
    16:   0.06%  94.32% avg cycles:  5041
    17:   0.57%  94.89% avg cycles:  5473
    18:   0.02%  94.91% avg cycles:  5396
    19:   0.03%  94.95% avg cycles:  5296
    20:   0.02%  94.96% avg cycles:  6749
    21:   0.18%  95.14% avg cycles:  6225
    22:   0.01%  95.15% avg cycles:  6393
    23:   0.01%  95.16% avg cycles:  6861
    24:   0.12%  95.28% avg cycles:  6912
    25:   0.05%  95.32% avg cycles:  7190
    26:   0.01%  95.33% avg cycles:  7793
    27:   0.01%  95.34% avg cycles:  7833
    28:   0.01%  95.35% avg cycles:  8253
    29:   0.08%  95.42% avg cycles:  8024
    30:   0.03%  95.45% avg cycles:  9670
    31:   0.01%  95.46% avg cycles:  8949
    32:   0.01%  95.46% avg cycles:  9350
    33:   3.11%  98.57% avg cycles:  8534
    34:   0.02%  98.60% avg cycles: 10977
    35:   0.02%  98.62% avg cycles: 11400

We get in to dimishing returns pretty quickly.  On pre-IvyBridge
CPUs, we used to set the limit at 8 pages, and it was set at 128
on IvyBrige.  That 128 number looks pretty silly considering that
less than 0.5% of the flushes are that large.

The previous code tried to size this number based on the size of
the TLB.  Good idea, but it's error-prone, needs maintenance
(which it didn't get up to now), and probably would not matter in
practice much.

Settting it to 33 means that we cover the mallopt
M_TRIM_THRESHOLD, which is the most universally common size to do
flushes.

That's the short version.  Here's the long one for why I chose 33:

1. These numbers have a constant bias in the timestamps from the
   tracing.  Probably counts for a couple hundred cycles in each of
   these tests, but it should be fairly _even_ across all of them.
   The smallest delta between the tracepoints I have ever seen is
   335 cycles.  This is one reason the cycles/page cost goes down in
   general as the flushes get larger.  The true cost is nearer to
   100 cycles.
2. A full flush is more expensive than a single invlpg, but not
   by much (single percentages).
3. A dtlb miss is 17.1ns (~45 cycles) and a itlb miss is 13.0ns
   (~34 cycles).  At those rates, refilling the 512-entry dTLB takes
   22,000 cycles.
4. 22,000 cycles is approximately the equivalent of doing 85
   invlpg operations.  But, the odds are that the TLB can
   actually be filled up faster than that because TLB misses that
   are close in time also tend to leverage the same caches.
6. ~98% of flushes are <=33 pages.  There are a lot of flushes of
   33 pages, probably because libc's M_TRIM_THRESHOLD is set to
   128k (32 pages)
7. I've found no consistent data to support changing the IvyBridge
   vs. SandyBridge tunable by a factor of 16

I used the performance counters on this hardware (IvyBridge i5-3320M)
to figure out the tlb miss costs:

ocperf.py stat -e dtlb_load_misses.walk_duration,dtlb_load_misses.walk_completed,dtlb_store_misses.walk_duration,dtlb_store_misses.walk_completed,itlb_misses.walk_duration,itlb_misses.walk_completed,itlb.itlb_flush

     7,720,030,970      dtlb_load_misses_walk_duration                                    [57.13%]
       169,856,353      dtlb_load_misses_walk_completed                                    [57.15%]
       708,832,859      dtlb_store_misses_walk_duration                                    [57.17%]
        19,346,823      dtlb_store_misses_walk_completed                                    [57.17%]
     2,779,687,402      itlb_misses_walk_duration                                    [57.15%]
        82,241,148      itlb_misses_walk_completed                                    [57.13%]
           770,717      itlb_itlb_flush                                              [57.11%]

Show that a dtlb miss is 17.1ns (~45 cycles) and a itlb miss is 13.0ns
(~34 cycles).  At those rates, refilling the 512-entry dTLB takes
22,000 cycles.  On a SandyBridge system with more cores and larger
caches, those are dtlb=13.4ns and itlb=9.5ns.

cat perf.stat.txt | perl -pe 's/,//g'
	| awk '/itlb_misses_walk_duration/ { icyc+=$1 }
		/itlb_misses_walk_completed/ { imiss+=$1 }
		/dtlb_.*_walk_duration/ { dcyc+=$1 }
		/dtlb_.*.*completed/ { dmiss+=$1 }
		END {print "itlb cyc/miss: ", icyc/imiss, " dtlb cyc/miss: ", dcyc/dmiss, "   -----    ", icyc,imiss, dcyc,dmiss }

On Westmere CPUs, the counters to use are: itlb_flush,itlb_misses.walk_cycles,itlb_misses.any,dtlb_misses.walk_cycles,dtlb_misses.any

The assumptions that this code went in under:
https://lkml.org/lkml/2012/6/12/119 say that a flush and a refill are
about 100ns.  Being generous, that is over by a factor of 6 on the
refill side, although it is fairly close on the cost of an invlpg.
An increase of a single invlpg operation seems to lengthen the flush
range operation by about 200 cycles.  Here is one example of the data
collected for flushing 10 and 11 pages (full data are below):

    10:   0.43%  93.90% avg cycles:  3570 cycles/page:  357 samples: 4714
    11:   0.20%  94.10% avg cycles:  3767 cycles/page:  342 samples: 2145

How to generate this table:

	echo 10000 > /sys/kernel/debug/tracing/buffer_size_kb
	echo x86-tsc > /sys/kernel/debug/tracing/trace_clock
	echo 'reason != 0' > /sys/kernel/debug/tracing/events/tlb/tlb_flush/filter
	echo 1 > /sys/kernel/debug/tracing/events/tlb/tlb_flush/enable

Pipe the trace output in to this script:

	http://sr71.net/~dave/intel/201402-tlb/trace-time-diff-process.pl.txt

Note that these data were gathered with the invlpg threshold set to
150 pages.  Only data points with >=50 of samples were printed:

Flush    % of     %<=
in       flush    this
pages      es     size
------------------------------------------------------------------------------
    -1:   2.20%   2.20% avg cycles:  2283 cycles/page: xxxx samples: 23960
     1:  56.92%  59.12% avg cycles:  1276 cycles/page: 1276 samples: 620895
     2:  13.78%  72.90% avg cycles:  1505 cycles/page:  752 samples: 150335
     3:   8.26%  81.16% avg cycles:  1880 cycles/page:  626 samples: 90131
     4:   7.41%  88.58% avg cycles:  2447 cycles/page:  611 samples: 80877
     5:   1.73%  90.31% avg cycles:  2358 cycles/page:  471 samples: 18885
     6:   1.32%  91.63% avg cycles:  2563 cycles/page:  427 samples: 14397
     7:   1.14%  92.77% avg cycles:  2862 cycles/page:  408 samples: 12441
     8:   0.62%  93.39% avg cycles:  3542 cycles/page:  442 samples: 6721
     9:   0.08%  93.47% avg cycles:  3289 cycles/page:  365 samples: 917
    10:   0.43%  93.90% avg cycles:  3570 cycles/page:  357 samples: 4714
    11:   0.20%  94.10% avg cycles:  3767 cycles/page:  342 samples: 2145
    12:   0.08%  94.18% avg cycles:  3996 cycles/page:  333 samples: 864
    13:   0.03%  94.20% avg cycles:  4077 cycles/page:  313 samples: 289
    14:   0.02%  94.23% avg cycles:  4836 cycles/page:  345 samples: 236
    15:   0.04%  94.26% avg cycles:  5699 cycles/page:  379 samples: 390
    16:   0.06%  94.32% avg cycles:  5041 cycles/page:  315 samples: 643
    17:   0.57%  94.89% avg cycles:  5473 cycles/page:  321 samples: 6229
    18:   0.02%  94.91% avg cycles:  5396 cycles/page:  299 samples: 224
    19:   0.03%  94.95% avg cycles:  5296 cycles/page:  278 samples: 367
    20:   0.02%  94.96% avg cycles:  6749 cycles/page:  337 samples: 185
    21:   0.18%  95.14% avg cycles:  6225 cycles/page:  296 samples: 1964
    22:   0.01%  95.15% avg cycles:  6393 cycles/page:  290 samples: 83
    23:   0.01%  95.16% avg cycles:  6861 cycles/page:  298 samples: 61
    24:   0.12%  95.28% avg cycles:  6912 cycles/page:  288 samples: 1307
    25:   0.05%  95.32% avg cycles:  7190 cycles/page:  287 samples: 533
    26:   0.01%  95.33% avg cycles:  7793 cycles/page:  299 samples: 94
    27:   0.01%  95.34% avg cycles:  7833 cycles/page:  290 samples: 66
    28:   0.01%  95.35% avg cycles:  8253 cycles/page:  294 samples: 73
    29:   0.08%  95.42% avg cycles:  8024 cycles/page:  276 samples: 846
    30:   0.03%  95.45% avg cycles:  9670 cycles/page:  322 samples: 296
    31:   0.01%  95.46% avg cycles:  8949 cycles/page:  288 samples: 79
    32:   0.01%  95.46% avg cycles:  9350 cycles/page:  292 samples: 60
    33:   3.11%  98.57% avg cycles:  8534 cycles/page:  258 samples: 33936
    34:   0.02%  98.60% avg cycles: 10977 cycles/page:  322 samples: 268
    35:   0.02%  98.62% avg cycles: 11400 cycles/page:  325 samples: 177
    36:   0.01%  98.63% avg cycles: 11504 cycles/page:  319 samples: 161
    37:   0.02%  98.65% avg cycles: 11596 cycles/page:  313 samples: 182
    38:   0.02%  98.66% avg cycles: 11850 cycles/page:  311 samples: 195
    39:   0.01%  98.68% avg cycles: 12158 cycles/page:  311 samples: 128
    40:   0.01%  98.68% avg cycles: 11626 cycles/page:  290 samples: 78
    41:   0.04%  98.73% avg cycles: 11435 cycles/page:  278 samples: 477
    42:   0.01%  98.73% avg cycles: 12571 cycles/page:  299 samples: 74
    43:   0.01%  98.74% avg cycles: 12562 cycles/page:  292 samples: 78
    44:   0.01%  98.75% avg cycles: 12991 cycles/page:  295 samples: 108
    45:   0.01%  98.76% avg cycles: 13169 cycles/page:  292 samples: 78
    46:   0.02%  98.78% avg cycles: 12891 cycles/page:  280 samples: 261
    47:   0.01%  98.79% avg cycles: 13099 cycles/page:  278 samples: 67
    48:   0.01%  98.80% avg cycles: 13851 cycles/page:  288 samples: 77
    49:   0.01%  98.80% avg cycles: 13749 cycles/page:  280 samples: 66
    50:   0.01%  98.81% avg cycles: 13949 cycles/page:  278 samples: 73
    52:   0.00%  98.82% avg cycles: 14243 cycles/page:  273 samples: 52
    54:   0.01%  98.83% avg cycles: 15312 cycles/page:  283 samples: 87
    55:   0.01%  98.84% avg cycles: 15197 cycles/page:  276 samples: 109
    56:   0.02%  98.86% avg cycles: 15234 cycles/page:  272 samples: 208
    57:   0.00%  98.86% avg cycles: 14888 cycles/page:  261 samples: 53
    58:   0.01%  98.87% avg cycles: 15037 cycles/page:  259 samples: 59
    59:   0.01%  98.87% avg cycles: 15752 cycles/page:  266 samples: 63
    62:   0.00%  98.89% avg cycles: 16222 cycles/page:  261 samples: 54
    64:   0.02%  98.91% avg cycles: 17179 cycles/page:  268 samples: 248
    65:   0.12%  99.03% avg cycles: 18762 cycles/page:  288 samples: 1324
    85:   0.00%  99.10% avg cycles: 21649 cycles/page:  254 samples: 50
   127:   0.01%  99.18% avg cycles: 32397 cycles/page:  255 samples: 75
   128:   0.13%  99.31% avg cycles: 31711 cycles/page:  247 samples: 1466
   129:   0.18%  99.49% avg cycles: 33017 cycles/page:  255 samples: 1927
   181:   0.33%  99.84% avg cycles:  2489 cycles/page:   13 samples: 3547
   256:   0.05%  99.91% avg cycles:  2305 cycles/page:    9 samples: 550
   512:   0.03%  99.95% avg cycles:  2133 cycles/page:    4 samples: 304
  1512:   0.01%  99.99% avg cycles:  3038 cycles/page:    2 samples: 65

Here are the tlb counters during a 10-second slice of a kernel compile
for a SandyBridge system.  It's better than IvyBridge, but probably
due to the larger caches since this was one of the 'X' extreme parts.

    10,873,007,282      dtlb_load_misses_walk_duration
       250,711,333      dtlb_load_misses_walk_completed
     1,212,395,865      dtlb_store_misses_walk_duration
        31,615,772      dtlb_store_misses_walk_completed
     5,091,010,274      itlb_misses_walk_duration
       163,193,511      itlb_misses_walk_completed
         1,321,980      itlb_itlb_flush

      10.008045158 seconds time elapsed

# cat perf.stat.1392743721.txt | perl -pe 's/,//g' | awk '/itlb_misses_walk_duration/ { icyc+=$1 } /itlb_misses_walk_completed/ { imiss+=$1 } /dtlb_.*_walk_duration/ { dcyc+=$1 } /dtlb_.*.*completed/ { dmiss+=$1 } END {print "itlb cyc/miss: ", icyc/imiss/3.3, " dtlb cyc/miss: ", dcyc/dmiss/3.3, "   -----    ", icyc,imiss, dcyc,dmiss }'
itlb ns/miss:  9.45338  dtlb ns/miss:  12.9716

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154103.10C1115E@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-31 08:48:51 -07:00
Dave Hansen 2d040a1ce9 x86/mm: New tunable for single vs full TLB flush
Most of the logic here is in the documentation file.  Please take
a look at it.

I know we've come full-circle here back to a tunable, but this
new one is *WAY* simpler.  I challenge anyone to describe in one
sentence how the old one worked.  Here's the way the new one
works:

	If we are flushing more pages than the ceiling, we use
	the full flush, otherwise we use per-page flushes.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154101.12B52CAF@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-31 08:48:51 -07:00
Dave Hansen d17d8f9ded x86/mm: Add tracepoints for TLB flushes
We don't have any good way to figure out what kinds of flushes
are being attempted.  Right now, we can try to use the vm
counters, but those only tell us what we actually did with the
hardware (one-by-one vs full) and don't tell us what was actually
_requested_.

This allows us to select out "interesting" TLB flushes that we
might want to optimize (like the ranged ones) and ignore the ones
that we have very little control over (the ones at context
switch).

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154059.4C96CBA5@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-31 08:48:51 -07:00
Dave Hansen a23421f111 x86/mm: Unify remote INVLPG code
There are currently three paths through the remote flush code:

1. full invalidation
2. single page invalidation using invlpg
3. ranged invalidation using invlpg

This takes 2 and 3 and combines them in to a single path by
making the single-page one just be the start and end be start
plus a single page.  This makes placement of our tracepoint easier.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154058.E0F90408@viggo.jf.intel.com
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-31 08:48:51 -07:00
Dave Hansen 9dfa6dee53 x86/mm: Fix missed global TLB flush stat
If we take the

	if (end == TLB_FLUSH_ALL || vmflag & VM_HUGETLB) {
		local_flush_tlb();
		goto out;
	}

path out of flush_tlb_mm_range(), we will have flushed the tlb,
but not incremented NR_TLB_LOCAL_FLUSH_ALL.  This unifies the
way out of the function so that we always take a single path when
doing a full tlb flush.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154056.FF763B76@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-31 08:48:50 -07:00
Dave Hansen e9f4e0a9fe x86/mm: Rip out complicated, out-of-date, buggy TLB flushing
I think the flush_tlb_mm_range() code that tries to tune the
flush sizes based on the CPU needs to get ripped out for
several reasons:

1. It is obviously buggy.  It uses mm->total_vm to judge the
   task's footprint in the TLB.  It should certainly be using
   some measure of RSS, *NOT* ->total_vm since only resident
   memory can populate the TLB.
2. Haswell, and several other CPUs are missing from the
   intel_tlb_flushall_shift_set() function.  Thus, it has been
   demonstrated to bitrot quickly in practice.
3. It is plain wrong in my vm:
	[    0.037444] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
	[    0.037444] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
	[    0.037444] tlb_flushall_shift: 6
   Which leads to it to never use invlpg.
4. The assumptions about TLB refill costs are wrong:
	http://lkml.kernel.org/r/1337782555-8088-3-git-send-email-alex.shi@intel.com
    (more on this in later patches)
5. I can not reproduce the original data: https://lkml.org/lkml/2012/5/17/59
   I believe the sample times were too short.  Running the
   benchmark in a loop yields times that vary quite a bit.

Note that this leaves us with a static ceiling of 1 page.  This
is a conservative, dumb setting, and will be revised in a later
patch.

This also removes the code which attempts to predict whether we
are flushing data or instructions.  We expect instruction flushes
to be relatively rare and not worth tuning for explicitly.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154055.ABC88E89@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-31 08:48:50 -07:00
Dave Hansen 4995ab9cf5 x86/mm: Clean up the TLB flushing code
The

	if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)

line of code is not exactly the easiest to audit, especially when
it ends up at two different indentation levels.  This eliminates
one of the the copy-n-paste versions.  It also gives us a unified
exit point for each path through this function.  We need this in
a minute for our tracepoint.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154054.44F1CDDC@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-31 08:48:50 -07:00
Peter Ujfalusi a74c52def9 clk: ti: clk-7xx: Correct ABE DPLL configuration
ABE DPLL frequency need to be lowered from 361267200
to 180633600 to facilitate the ATL requironments.
The dpll_abe_m2x2_ck clock need to be set to double
of ABE DPLL rate in order to have correct clocks
for audio.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-31 08:36:58 -07:00
David Rientjes 2f078b9cb8 x86, apic: Remove enable_apic_mode callback
The enable_apic_mode() apic callback is never called, so remove it.

Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302352320.17503@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-07-31 08:05:44 -07:00
David Rientjes 11a8318ef5 x86, apic: Remove setup_portio_remap callback
Since commit b5660ba76b ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the setup_portio_remap() apic callback has been obsolete.  Remove it.

Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302351480.17503@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-07-31 08:05:44 -07:00
David Rientjes e76661ba09 x86, apic: Remove multi_timer_check callback
Since commit b5660ba76b ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the multi_timer_check() apic callback has been obsolete.  Remove it.

Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302351120.17503@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-07-31 08:05:43 -07:00
David Rientjes 4c59f3e63d x86, apic: Replace noop_check_apicid_used
noop_check_apicid_used() has the same implementation as
default_check_apicid_used() in the standard header file, so replace the
former with the latter.

Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302350450.17503@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-07-31 08:05:43 -07:00
David Rientjes 658ffd7e6f x86, apic: Remove check_apicid_present callback
The check_apicid_present() apic callback is never called, so remove it
and functions that implement it.

Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302350160.17503@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-07-31 08:05:42 -07:00
David Rientjes c460b5d340 x86, apic: Remove mps_oem_check callback
Since commit b5660ba76b ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the mps_oem_check() apic callback has been obsolete.  Remove it.

This allows generic_mps_oem_check() to be removed as well.

Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302349390.17503@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-07-31 08:05:42 -07:00
David Rientjes 300eddf967 x86, apic: Remove smp_callin_clear_local_apic callback
Since commit b5660ba76b ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the smp_callin_clear_local_apic() apic callback has been obsolete.
Remove it.

Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302349040.17503@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-07-31 08:05:41 -07:00