Commit Graph

480699 Commits

Author SHA1 Message Date
Paul Burton 0fc0708a8a MIPS: smp-cps: Fix entry code cache flush for systems with coherent I/O
The dma_cache_wback_inv function performs exactly as is required here,
unless the system has coherent I/O in which case it's a no-op. Call the
underlying cache writeback functions directly, which is arguably clearer
anyway given that the code doesn't actually have anything to do with
DMA in a strict sense.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7282/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 20:49:36 +02:00
Mauro Carvalho Chehab 32570579cb [media] ir-rc5-decoder: print where decoding fails
The IR dprintk message that prints a RC5 decoding failure
is not much helpful, as it doesn't tell on what bit the
error occurred.

Add such information, in order to make the debug message
more useful.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-30 15:49:35 -03:00
Paul Burton c90e49f264 MIPS: {pm,smp}-cps: use cpu_vpe_id macro
When determining the VPE ID of a CPU, make use of the cpu_vpe_id macro
which will return 0 in a non-MT kernel build. Most code is already doing
so but a couple of places weren't. Fixing this prevents a build failure
for non-MT kernels where struct cpuinfo_mips does not contain the vpe_id
field:

  arch/mips/kernel/pm-cps.c: In function 'cps_pm_enter_state':
  arch/mips/kernel/pm-cps.c:153:51: error: 'struct cpuinfo_mips' has no
      member named 'vpe_id'
    vpe_cfg = &core_cfg->vpe_config[current_cpu_data.vpe_id];

  arch/mips/kernel/smp-cps.c: In function 'wait_for_sibling_halt':
  arch/mips/kernel/smp-cps.c:363:33: error: 'struct cpuinfo_mips' has no
      member named 'vpe_id'
    unsigned vpe_id = cpu_data[cpu].vpe_id;

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 20:48:42 +02:00
Paul Burton 34bd3e6b98 MIPS: Fix potential build failures using cpu_vpe_id on non-MT
When used in a non-MT kernel, the cpu_vpe_id macro never made use of
its cpuinfo argument. It doesn't actually need to since it is returning
a constant 0. However not using the argument can lead to build failures
if the compiler then notices that a variable used as part of the
argument is unused. Prevent that problem by "using" the argument as far
as the compiler is concerned, whilst still returning 0 as before.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7280/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 20:48:21 +02:00
Paul Burton a8b846775e MIPS: pm-cps: Select CONFIG_MIPS_CPC
The pm-cps code can run without a CPC, although will be limited to using
only the 2 wait idle states. However the code does check for CPC
presence, and in order to work optimally the CPC support is needed. So
select it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7279/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 20:48:00 +02:00
Paul Burton 064231e548 MIPS: pm-cps: Prevent use of mips_cps_* without CPS SMP
These symbols will not be defined when CONFIG_MIPS_CPS=n, but although
the CPS_PM_POWER_GATED state will never be used in that case the
compiler doesn't have enough information to figure that out. Add checks
which evaluate to a constant false for CONFIG_MIPS_CPS=n cases in order
to help the compiler out & eliminate the symbol references.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7278/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 20:47:39 +02:00
Mauro Carvalho Chehab d24b69fc6b [media] rc-main: allow raw protocol drivers to restrict the allowed protos
On some hardware (au0828/au8522), the hardware is broken with
regards to the initial pulse detection. So, the driver needs to
produce a fake start pulse. That limits the acceptable protocols,
as it is not possible to produce a fake pulse that would cover
all supported protocols.

So, allow the driver to explicitly set the allowed protocols.

If the driver doesn't specify, keep the old behavior.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-30 15:45:48 -03:00
Mauro Carvalho Chehab cfd0c77d08 [media] au0828: improve I2C speed
Commits 21dc61d3c0 and 7a1dd50b89 reduced the board I2C
speed to 20 MHz by default, due to a I2C stretch issue:
while xc5000 uses i2c stretch when a command is sent to it,
au0828 doesn't support this feature.

However, this is needed only for Xceive tuners. The other
I2C devices can work at the max speed.

So, revert the workarounds at board level, handling it at
I2C level, only when talking with xc5000.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-30 15:44:25 -03:00
Petri Gynther dce0e7d54a MIPS: ftrace: Fix dynamic tracing of kernel modules
Dynamic tracing of kernel modules is broken on 32-bit MIPS. When modules
are loaded, the kernel crashes when dynamic tracing is enabled with:
 cd /sys/kernel/debug/tracing
 echo > set_ftrace_filter
 echo function > current_tracer

1) arch/mips/kernel/ftrace.c
When the kernel boots, or when a module is initialized, ftrace_make_nop()
modifies every _mcount call site to eliminate the ftrace overhead.
However, when ftrace is later enabled for a call site, ftrace_make_call()
does not currently restore the _mcount call correctly for module call sites.
Added ftrace_modify_code_2r() and modified ftrace_make_call() to fix this.

2) arch/mips/kernel/mcount.S
_mcount assembly routine is supposed to have the caller's _mcount call site
address in register a0. However, a0 is currently not calculated correctly for
module call sites. a0 should be (ra - 20) or (ra - 24), depending on whether
the kernel was built with KBUILD_MCOUNT_RA_ADDRESS or not.

This fix has been tested on Broadcom BMIPS5000 processor. Dynamic tracing
now works for both built-in functions and module functions.

Signed-off-by: Petri Gynther <pgynther@google.com>
Cc: linux-mips@linux-mips.org
Cc: rostedt@goodmis.org
Cc: alcooperx@gmail.com
Cc: cminyard@mvista.com
Patchwork: https://patchwork.linux-mips.org/patch/7476/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 20:37:42 +02:00
Paolo Bonzini 0f6c0a740b KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table
Currently, the EOI exit bitmap (used for APICv) does not include
interrupts that are masked.  However, this can cause a bug that manifests
as an interrupt storm inside the guest.  Alex Williamson reported the
bug and is the one who really debugged this; I only wrote the patch. :)

The scenario involves a multi-function PCI device with OHCI and EHCI
USB functions and an audio function, all assigned to the guest, where
both USB functions use legacy INTx interrupts.

As soon as the guest boots, interrupts for these devices turn into an
interrupt storm in the guest; the host does not see the interrupt storm.
Basically the EOI path does not work, and the guest continues to see the
interrupt over and over, even after it attempts to mask it at the APIC.
The bug is only visible with older kernels (RHEL6.5, based on 2.6.32
with not many changes in the area of APIC/IOAPIC handling).

Alex then tried forcing bit 59 (corresponding to the USB functions' IRQ)
on in the eoi_exit_bitmap and TMR, and things then work.  What happens
is that VFIO asserts IRQ11, then KVM recomputes the EOI exit bitmap.
It does not have set bit 59 because the RTE was masked, so the IOAPIC
never sees the EOI and the interrupt continues to fire in the guest.

My guess was that the guest is masking the interrupt in the redirection
table in the interrupt routine, i.e. while the interrupt is set in a
LAPIC's ISR, The simplest fix is to ignore the masking state, we would
rather have an unnecessary exit rather than a missed IRQ ACK and anyway
IOAPIC interrupts are not as performance-sensitive as for example MSIs.
Alex tested this patch and it fixed his bug.

[Thanks to Alex for his precise description of the problem
 and initial debugging effort.  A lot of the text above is
 based on emails exchanged with him.]

Reported-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-30 20:22:30 +02:00
H. Peter Anvin c3107e3c50 Merge tag 'please-pull-apei' into x86/ras
APEI is currently implemented so that it depends on x86 hardware.
The primary dependency is that GHES uses the x86 NMI for hardware
error notification and MCE for memory error handling. These patches
remove that dependency.

Other APEI features such as error reporting via external IRQ, error
serialization, or error injection, do not require changes to use them
on non-x86 architectures.

The following patch set eliminates the APEI Kconfig x86 dependency
by making these changes:
- treat NMI notification as GHES architecture - HAVE_ACPI_APEI_NMI
- group and wrap around #ifdef CONFIG_HAVE_ACPI_APEI_NMI code which
  is used only for NMI path
- identify architectural boxes and abstract it accordingly (tlb flush and MCE)
- rework ioremap for both IRQ and NMI context

NMI code is kept in ghes.c file since NMI and IRQ context are tightly coupled.

Note, these patches introduce no functional changes for x86. The NMI notification
feature is hard selected for x86. Architectures that want to use this
feature should also provide NMI code infrastructure.
2014-07-30 10:48:00 -07:00
Mike Qiu 5ccb8225ab x86/ras: Fix build warnings in <linux/aer.h>
Fix build warning due to a missing forward declaration in
<linux/aer.h>.  We need struct pci_dev to be forward declared so we
can define pointers to it, but we don't need to pull in the whole
definition.

build log:

In file included from include/ras/ras_event.h:11:0,
                 from drivers/ras/ras.c:13:
include/linux/aer.h:42:129: warning: ‘struct pci_dev’
declared inside parameter list [enabled by default]

include/linux/aer.h:42:129: warning: its scope is only
this definition or declaration, which is probably not
what you want [enabled by default]

include/linux/aer.h:46:130: warning: ‘struct pci_dev’
declared inside parameter list [enabled by default]

include/linux/aer.h:50:136: warning: ‘struct pci_dev’
declared inside parameter list [enabled by default]

include/linux/aer.h:57:14: warning: ‘struct pci_dev’
declared inside parameter list [enabled by default]

Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/53d7dea511471321bb@agluck-desk.sc.intel.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-30 10:42:55 -07:00
Paul Burton b1442d39fa MIPS: Prevent user from setting FCSR cause bits
If one or more matching FCSR cause & enable bits are set in saved thread
context then when that context is restored the kernel will take an FP
exception. This is of course undesirable and considered an oops, leading
to the kernel writing a backtrace to the console and potentially
rebooting depending upon the configuration. Thus the kernel avoids this
situation by clearing the cause bits of the FCSR register when handling
FP exceptions and after emulating FP instructions.

However the kernel does not prevent userland from setting arbitrary FCSR
cause & enable bits via ptrace, using either the PTRACE_POKEUSR or
PTRACE_SETFPREGS requests. This means userland can trivially cause the
kernel to oops on any system with an FPU. Prevent this from happening
by clearing the cause bits when writing to the saved FCSR context via
ptrace.

This problem appears to exist at least back to the beginning of the git
era in the PTRACE_POKEUSR case.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7438/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 19:30:39 +02:00
Johan Hedberg 82c295b1b0 Bluetooth: Always use non-bonding requirement when not bondable
When we're not bondable we should never send any other SSP
authentication requirement besides one of the non-bonding ones.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:41 +02:00
Johan Hedberg b2939475eb Bluetooth: Rename pairable mgmt setting to bondable
This setting maps to the HCI_BONDABLE flag which tracks whether we're
bondable or not. Therefore, rename the mgmt setting and respective
command accordingly.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:41 +02:00
Johan Hedberg b6ae8457ac Bluetooth: Rename HCI_PAIRABLE to HCI_BONDABLE
The HCI_PAIRABLE flag isn't actually controlling whether we're pairable
but whether we're bondable. Therefore, rename it accordingly.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:41 +02:00
Marcel Holtmann bdb9434664 Bluetooth: Fix sparse warning from HID new leds handling
The new leds bit handling produces this spares warning.

  CHECK   net/bluetooth/hidp/core.c
net/bluetooth/hidp/core.c:156:60: warning: dubious: x | !y

Just fix it by doing an explicit x << 0 shift operation.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-30 19:28:41 +02:00
Johan Hedberg 6f78fd4bb9 Bluetooth: Fix check for connected state when pairing
Both BT_CONNECTED and BT_CONFIG state mean that we have a baseband link
available. We should therefore check for either of these when pairing
and deciding whether to call hci_conn_security() directly.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:41 +02:00
Varka Bhadram 233351bd66 6lowpan: remove unused function
This patch removes the unused function.

Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:41 +02:00
Varka Bhadram 267ca9fefc 6lowpan: remove unused macros
This patch removes the unused macros.

Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:41 +02:00
Marcel Holtmann 3fa71fe0b9 6lowpan: iphc: Fix parenthesis alignments which off-by-one
CHECK: Alignment should match open parenthesis
+	if (((hdr->flow_lbl[0] & 0x0F) == 0) &&
+	     (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) {

CHECK: Alignment should match open parenthesis
+		if ((hdr->priority == 0) &&
+		   ((hdr->flow_lbl[0] & 0xF0) == 0)) {

CHECK: Alignment should match open parenthesis
+		if ((hdr->priority == 0) &&
+		   ((hdr->flow_lbl[0] & 0xF0) == 0)) {

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-30 19:28:40 +02:00
Marcel Holtmann 9ab9bb009c 6lowpan: iphc: Fix missing braces for if statement
CHECK: braces {} should be used on all arms of this statement
+	if ((iphc0 & 0x03) != LOWPAN_IPHC_TTL_I)
[...]
+	else {
[...]

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-30 19:28:40 +02:00
Marcel Holtmann 26fff593cd 6lowpan: iphc: Fix missing blank line after variable declarations
WARNING: Missing a blank line after declarations
+		struct sk_buff *new;
+		if (uncompress_udp_header(skb, &uh))

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-30 19:28:40 +02:00
Marcel Holtmann 7fc4cfda75 6lowpan: iphc: Fix issues with alignment matching open parenthesis
This patch fixes all the issues with alignment matching of open
parenthesis found by checkpatch.pl and makes them follow the
network coding style now.

CHECK: Alignment should match open parenthesis
+static int uncompress_addr(struct sk_buff *skb,
+				struct in6_addr *ipaddr, const u8 address_mode,

CHECK: Alignment should match open parenthesis
+static int uncompress_context_based_src_addr(struct sk_buff *skb,
+						struct in6_addr *ipaddr,

CHECK: Alignment should match open parenthesis
+static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr,
+		struct net_device *dev, skb_delivery_cb deliver_skb)

CHECK: Alignment should match open parenthesis
+	new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb),
+								GFP_ATOMIC);

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb data dump before receiving",
+			new->data, new->len);

CHECK: Alignment should match open parenthesis
+lowpan_uncompress_multicast_daddr(struct sk_buff *skb,
+		struct in6_addr *ipaddr,

CHECK: Alignment should match open parenthesis
+	raw_dump_inline(NULL, "Reconstructed ipv6 multicast addr is",
+				ipaddr->s6_addr, 16);

CHECK: Alignment should match open parenthesis
+int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
+		const u8 *saddr, const u8 saddr_type, const u8 saddr_len,

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb data dump uncompressed",
+				skb->data, skb->len);

CHECK: Alignment should match open parenthesis
+		err = uncompress_addr(skb, &hdr.saddr, tmp, saddr,
+					saddr_type, saddr_len);

CHECK: Alignment should match open parenthesis
+		err = uncompress_addr(skb, &hdr.daddr, tmp, daddr,
+					daddr_type, daddr_len);

CHECK: Alignment should match open parenthesis
+		pr_debug("dest: stateless compression mode %d dest %pI6c\n",
+			tmp, &hdr.daddr);

CHECK: Alignment should match open parenthesis
+		raw_dump_table(__func__, "raw UDP header dump",
+				      (u8 *)&uh, sizeof(uh));

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw header dump", (u8 *)&hdr,
+							sizeof(hdr));

CHECK: Alignment should match open parenthesis
+int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev,
+			unsigned short type, const void *_daddr,

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb network header dump",
+		skb_network_header(skb), sizeof(struct ipv6hdr));

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__,
+			"sending raw skb network uncompressed packet",

CHECK: Alignment should match open parenthesis
+	if (((hdr->flow_lbl[0] & 0x0F) == 0) &&
+	     (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) {

WARNING: quoted string split across lines
+			pr_debug("dest address unicast link-local %pI6c "
+				"iphc1 0x%02x\n", &hdr->daddr, iphc1);

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb data dump compressed",
+				skb->data, skb->len);

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-30 19:28:40 +02:00
Marcel Holtmann 89f534905a 6lowpan: iphc: Fix block comments to match networking style
This patch fixes all the block comment issues found by checkpatch.pl and
makes them match the network style now.

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Based on patches from Jon Smirl <jonsmirl@gmail.com>

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source and

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source context

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+		/*
+		 * UDP lenght needs to be infered from the lower layers

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Traffic Class and FLow Label carried in-line

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Traffic class carried in-line

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Flow Label carried in-line

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+		/*
+		 * replace the compressed UDP head by the uncompressed UDP

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * As we copy some bit-length fields, in the IPHC encoding bytes,

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Traffic class, flow label

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Hop limit

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-30 19:28:40 +02:00
Alexander Aring 004942445d 6lowpan: remove unused LOWPAN_FRAG_SIZE define
This define is unused since commit
96cb3eb7a1 ("6lowpan: fix fragmentation on
sending side"). It is a worst case scenario for payload calculation.
Since commit 96cb3eb7a1 we calculation the
payload to use the optimal size.

This define is also necessary for ieee802154 6lowpan only and the file
include/net/6lowpan.h should contain generic 6lowpan things only.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:40 +02:00
Alexander Aring b2e3a479a6 6lowpan: iphc: remove check on null
This memory is placed on stack and can't be null so remove the check on
null.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:39 +02:00
Alexander Aring 556a5bfc03 6lowpan: iphc: use ipv6 api to check address scope
This patch removes the own implementation to check of link-layer,
broadcast and any address type and use the IPv6 api for that.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:39 +02:00
Alexander Aring 85c71240a3 6lowpan: iphc: cleanup use of lowpan_push_hc_data
This patch uses the lowpan_push_hc_data functions in several places
where we can use it. The lowpan_push_hc_data was introduced in some
previous patches.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:39 +02:00
Alexander Aring 4ebc960f94 6lowpan: iphc: cleanup use of lowpan_fetch_skb
We introduced the lowpan_fetch_skb function in some previous patches for
6lowpan to have a generic fetch function. This patch drops the old
function and use the generic lowpan_fetch_skb one.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:39 +02:00
Alexander Aring 8ec1d9be32 6lowpan: iphc: use sizeof in udp uncompression
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:39 +02:00
Alexander Aring 84ca5e036f 6lowpan: iphc: rename hc06_ptr pointer to hc_ptr
The hc06_ptr pointer variable stands for header compression draft-06. We
are mostly rfc complaint. This patch rename the variable to normal hc_ptr.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:39 +02:00
Johan Hedberg 616d55be4c Bluetooth: Fix SMP context tracking leading to a kernel crash
The HCI_CONN_LE_SMP_PEND flag is supposed to indicate whether we have an
SMP context or not. If the context creation fails, or some other error
is indicated between setting the flag and creating the context the flag
must be cleared first.

This patch ensures that smp_chan_create() clears the flag in case of
allocation failure as well as reorders code in smp_cmd_security_req()
that could lead to returning an error between setting the flag and
creating the context.

Without the patch the following kind of kernel crash could be observed
(this one because of unacceptable authentication requirements in a
Security Request):

[  +0.000855] kernel BUG at net/bluetooth/smp.c:606!
[  +0.000000] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[  +0.000000] CPU: 0 PID: 58 Comm: kworker/u5:2 Tainted: G        W     3.16.0-rc1+ #785
[  +0.008391] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  +0.000000] Workqueue: hci0 hci_rx_work
[  +0.000000] task: f4dc8f90 ti: f4ef0000 task.ti: f4ef0000
[  +0.000000] EIP: 0060:[<c13432b6>] EFLAGS: 00010246 CPU: 0
[  +0.000000] EIP is at smp_chan_destroy+0x1e/0x145
[  +0.000709] EAX: f46db870 EBX: 00000000 ECX: 00000000 EDX: 00000005
[  +0.000000] ESI: f46db870 EDI: f46db870 EBP: f4ef1dc0 ESP: f4ef1db0
[  +0.000000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[  +0.000000] CR0: 8005003b CR2: b666b0b0 CR3: 00022000 CR4: 00000690
[  +0.000000] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[  +0.000000] DR6: fffe0ff0 DR7: 00000400
[  +0.000000] Stack:
[  +0.000000]  00000005 f17b7840 f46db870 f4ef1dd4 f4ef1de4 c1343441 c134342e 00000000
[  +0.000000]  c1343441 00000005 00000002 00000000 f17b7840 f4ef1e38 c134452a 00002aae
[  +0.000000]  01ef1e00 00002aae f46bd980 f46db870 00000039 ffffffff 00000007 f4ef1e34
[  +0.000000] Call Trace:
[  +0.000000]  [<c1343441>] smp_failure+0x64/0x6c
[  +0.000000]  [<c134342e>] ? smp_failure+0x51/0x6c
[  +0.000000]  [<c1343441>] ? smp_failure+0x64/0x6c
[  +0.000000]  [<c134452a>] smp_sig_channel+0xad6/0xafc
[  +0.000000]  [<c1053b61>] ? vprintk_emit+0x343/0x366
[  +0.000000]  [<c133f34e>] l2cap_recv_frame+0x1337/0x1ac4
[  +0.000000]  [<c133f34e>] ? l2cap_recv_frame+0x1337/0x1ac4
[  +0.000000]  [<c1172307>] ? __dynamic_pr_debug+0x3e/0x40
[  +0.000000]  [<c11702a1>] ? debug_smp_processor_id+0x12/0x14
[  +0.000000]  [<c1340bc9>] l2cap_recv_acldata+0xe8/0x239
[  +0.000000]  [<c1340bc9>] ? l2cap_recv_acldata+0xe8/0x239
[  +0.000000]  [<c1169931>] ? __const_udelay+0x1a/0x1c
[  +0.000000]  [<c131f120>] hci_rx_work+0x1a1/0x286
[  +0.000000]  [<c137244e>] ? mutex_unlock+0x8/0xa
[  +0.000000]  [<c131f120>] ? hci_rx_work+0x1a1/0x286
[  +0.000000]  [<c1038fe5>] process_one_work+0x128/0x1df
[  +0.000000]  [<c1038fe5>] ? process_one_work+0x128/0x1df
[  +0.000000]  [<c10392df>] worker_thread+0x222/0x2de
[  +0.000000]  [<c10390bd>] ? process_scheduled_works+0x21/0x21
[  +0.000000]  [<c103d34c>] kthread+0x82/0x87
[  +0.000000]  [<c1040000>] ? create_new_namespaces+0x90/0x105
[  +0.000000]  [<c13738e1>] ret_from_kernel_thread+0x21/0x30
[  +0.000000]  [<c103d2ca>] ? __kthread_parkme+0x50/0x50
[  +0.000000] Code: 65 f4 89 f0 5b 5e 5f 5d 8d 67 f8 5f c3 57 8d 7c 24 08 83 e4 f8 ff 77 fc 55 89 e5 57 89 c7 56 53 52 8b 98 e0 00 00 00 85 db 75 02 <0f> 0b 8b b3 80 00 00 00 8b 00 c1 ee 03 83 e6 01 89 f2 e8 ef 09
[  +0.000000] EIP: [<c13432b6>] smp_chan_destroy+0x1e/0x145 SS:ESP 0068:f4ef1db0

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-30 19:28:38 +02:00
Benjamin Gaignard d219673d84 drm: sti: add Compositor
Compositor control all the input sub-device (VID, GDP)
and the mixer(s).
It is the main entry point for composition.
Layer interface is used to control the abstracted layers.

Add debug in mixer and GDP.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 19:28:27 +02:00
Hauke Mehrtens 250dc03727 MIPS: BCM47XX: add Microsoft MN-700 and Asus WL500G
This patch adds detection for the Microsoft MN-700 and the Asus WL500G
router. This is based on some old code from OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: zajec5@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7490/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 19:27:06 +02:00
Benjamin Gaignard e21e21939c drm: sti: add Mixer
Mixer hardware IP is responsible of mixing the different inputs layers.
Z-order is managed by the mixer.
We could 2 mixers: one for main path and one for auxillary path

Mixers are part of Compositor hardware block

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 19:26:59 +02:00
Benjamin Gaignard cfd8d744fe drm: sti: add VID layer
VIDeo plug are one of the compositor input sub-devices.
VID are dedicated to video inputs like YUV plans.

Like GDP, VID are part of Compositor hardware block
and use sti_layer structure to provide an abstraction for
Compositor calls.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 19:26:51 +02:00
Benjamin Gaignard ba2d53fb6f drm: sti: add GDP layer
Generic Display Pipeline are one of the compositor input sub-devices.
GDP are dedicated to graphic input like RGB plans.
GDP is part of Compositor hardware block which will be introduce later.

A sti_layer structure is used to abstract GDP calls from Compositor.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 19:26:47 +02:00
Benjamin Gaignard cdfbff788e drm: sti: add TVOut driver
TVout hardware block is responsible to dispatch the data flow coming
from compositor block to any of the output (HDMI or Analog TV).
It control when output are start/stop and configure according the
require flow path.

TVout is the parent of HDMI and HDA drivers and bind them at runtime.

Tvout is mapped on drm_encoder structure.
One encoder is created for each of the sub-devices and link to their
connector/bridge

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 19:26:17 +02:00
Benjamin Gaignard c86a5f6e1b drm: sti: add HDA driver
Add driver to support analog TV ouput.

HDA driver is mapped on drm_bridge and drm_connector structures.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 19:25:30 +02:00
Hauke Mehrtens 103c0bf3ff MIPS: BCM47XX: fixup broken MAC addresses in nvram
The address prefix 00:90:4C is used by Broadcom in their initial
configuration. When a mac address with the prefix 00:90:4C is used all
devices from the same series are sharing the same mac address. To
prevent mac address collisions we replace them with a mac address based
on the base address. To generate such addresses we take the main mac
address from et0macaddr and increase it by two for the first wifi
device and by 3 for the second one. This matches the printed mac
address on the device. The main mac address increased by one is used as
wan address by the vendor code.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: zajec5@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7489/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 19:25:15 +02:00
Benjamin Gaignard 5402626c83 drm: sti: add HDMI driver
Add driver for HDMI output.
HDMI PHY registers are mixed into HDMI device registers
and their is only one IRQ for all this hardware block.
That is why PHYs aren't using phy framework but only a
thin hdmi_phy_ops structure with start and stop functions.

HDMI driver is mapped on drm_bridge and drm_connector structures.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 19:24:55 +02:00
Hauke Mehrtens 316cad5c1d MIPS: BCM47XX: make reboot more relaiable
The reboot on the BCM47XX SoCs is done, by setting the watchdog counter
to 1 and let it trigger a reboot, when it reaches 0. Some devices with
a BCM4705/BCM4785 SoC do not reboot when the counter is set to 1 and
decreased to 0 by the hardware. It looks like it works more reliable
when we set it to 3. As far as I understand the hardware, this should
not make any difference, but I do not have access to any documentation
for this SoC.
It is still not 100% reliable.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: zajec5@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7488/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 19:24:28 +02:00
Benjamin Gaignard 9ed68fa74e drm: sti: add VTAC drivers
Video Traffic Advance Communication Rx and Tx drivers are designed
for inter-die communication.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 19:23:49 +02:00
Rob Kendrick c3b9b945e0 MIPS: math-emu: Fix instruction decoding.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 19:13:35 +02:00
Tejun Heo e8f781836d Merge branch 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata into for-3.17
The scheduled ahci platform patches depend on change in
for-3.16-fixes.  Pull it into for-3.17.

Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-30 12:49:04 -04:00
Benjamin Gaignard f2cb314864 drm: sti: add VTG driver
Video Time Generator drivers are used to synchronize the compositor
and tvout hardware IPs by providing line count, sample count,
synchronization signals (HSYNC, VSYNC) and top and bottom fields
indication.
VTG are used by pair for each data path (main or auxiliary)
one for master and one for slave.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 18:20:56 +02:00
Alexey Perevalov d24675cb1f netfilter: nfnetlink_acct: dump unmodified nfacct flags
NFNL_MSG_ACCT_GET_CTRZERO modifies dumped flags, in this case
client see unmodified (uncleared) counter value and cleared
overquota state - end user doesn't know anything about overquota state,
unless end user subscribed on overquota report.

Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-07-30 18:16:56 +02:00
Benjamin Gaignard 30ebb9088c drm: sti: add bindings for DRM driver
Add DRM/KMS driver bindings documentation.
Describe the required properties for each of the hardware IPs drivers.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 18:11:53 +02:00
Wei Yongjun 19f5be0f40 ahci: imx: add missing clk_disable_unprepare() on error in imx_sata_enable()
Add the missing clk_disable_unprepare() before return from
imx_sata_enable() in the phy reset error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-30 12:04:22 -04:00