Commit Graph

480699 Commits

Author SHA1 Message Date
Mihai Caraman debf27d6b9 KVM: PPC: e500: Emulate power management control SPR
For FSL e6500 core the kernel uses power management SPR register (PWRMGTCR0)
to enable idle power down for cores and devices by setting up the idle count
period at boot time. With the host already controlling the power management
configuration the guest could simply benefit from it, so emulate guest request
as a general store.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:27 +02:00
Alexander Graf 6947f948f0 KVM: PPC: Book3S HV: Enable for little endian hosts
Now that we've fixed all the issues that HV KVM code had on little endian
hosts, we can enable it in the kernel configuration for users to play with.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:26 +02:00
Alexander Graf 9bf163f86d KVM: PPC: Book3S HV: Fix ABIv2 on LE
For code that doesn't live in modules we can just branch to the real function
names, giving us compatibility with ABIv1 and ABIv2.

Do this for the compiled-in code of HV KVM.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:25 +02:00
Alexander Graf 76d072fb05 KVM: PPC: Book3S HV: Access XICS in BE
On the exit path from the guest we check what type of interrupt we received
if we received one. This means we're doing hardware access to the XICS interrupt
controller.

However, when running on a little endian system, this access is byte reversed.

So let's make sure to swizzle the bytes back again and virtually make XICS
accesses big endian.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:24 +02:00
Alexander Graf 0865a583a4 KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE
Some data structures are always stored in big endian. Among those are the LPPACA
fields as well as the shadow slb. These structures might be shared with a
hypervisor.

So whenever we access those fields, make sure we do so in big endian byte order.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:23 +02:00
Alexander Graf 0240755225 KVM: PPC: Book3S HV: Access guest VPA in BE
There are a few shared data structures between the host and the guest. Most
of them get registered through the VPA interface.

These data structures are defined to always be in big endian byte order, so
let's make sure we always access them in big endian.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:22 +02:00
Alexander Graf 6f22bd3265 KVM: PPC: Book3S HV: Make HTAB code LE host aware
When running on an LE host all data structures are kept in little endian
byte order. However, the HTAB still needs to be maintained in big endian.

So every time we access any HTAB we need to make sure we do so in the right
byte order. Fix up all accesses to manually byte swap.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:22 +02:00
Alexander Graf 8f6822c4b9 PPC: Add asm helpers for BE 32bit load/store
From assembly code we might not only have to explicitly BE access 64bit values,
but sometimes also 32bit ones. Add helpers that allow for easy use of lwzx/stwx
in their respective byte-reverse or native form.

Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28 15:22:21 +02:00
Mihai Caraman d57cef91a0 KVM: PPC: e500: Fix default tlb for victim hint
Tlb search operation used for victim hint relies on the default tlb set by the
host. When hardware tablewalk support is enabled in the host, the default tlb is
TLB1 which leads KVM to evict the bolted entry. Set and restore the default tlb
when searching for victim hint.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:20 +02:00
Michael Neuling 9642382e82 KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling
This adds support for the H_SET_MODE hcall.  This hcall is a
multiplexer that has several functions, some of which are called
rarely, and some which are potentially called very frequently.
Here we add support for the functions that set the debug registers
CIABR (Completed Instruction Address Breakpoint Register) and
DAWR/DAWRX (Data Address Watchpoint Register and eXtension),
since they could be updated by the guest as often as every context
switch.

This also adds a kvmppc_power8_compatible() function to test to see
if a guest is compatible with POWER8 or not.  The CIABR and DAWR/X
only exist on POWER8.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:19 +02:00
Paul Mackerras ae2113a4f1 KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled
This adds code to check that when the KVM_CAP_PPC_ENABLE_HCALL
capability is used to enable or disable in-kernel handling of an
hcall, that the hcall is actually implemented by the kernel.
If not an EINVAL error is returned.

This also checks the default-enabled list of hcalls and prints a
warning if any hcall there is not actually implemented.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:18 +02:00
Paul Mackerras 699a0ea082 KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling
This provides a way for userspace controls which sPAPR hcalls get
handled in the kernel.  Each hcall can be individually enabled or
disabled for in-kernel handling, except for H_RTAS.  The exception
for H_RTAS is because userspace can already control whether
individual RTAS functions are handled in-kernel or not via the
KVM_PPC_RTAS_DEFINE_TOKEN ioctl, and because the numeric value for
H_RTAS is out of the normal sequence of hcall numbers.

Hcalls are enabled or disabled using the KVM_ENABLE_CAP ioctl for the
KVM_CAP_PPC_ENABLE_HCALL capability on the file descriptor for the VM.
The args field of the struct kvm_enable_cap specifies the hcall number
in args[0] and the enable/disable flag in args[1]; 0 means disable
in-kernel handling (so that the hcall will always cause an exit to
userspace) and 1 means enable.  Enabling or disabling in-kernel
handling of an hcall is effective across the whole VM.

The ability for KVM_ENABLE_CAP to be used on a VM file descriptor
on PowerPC is new, added by this commit.  The KVM_CAP_ENABLE_CAP_VM
capability advertises that this ability exists.

When a VM is created, an initial set of hcalls are enabled for
in-kernel handling.  The set that is enabled is the set that have
an in-kernel implementation at this point.  Any new hcall
implementations from this point onwards should not be added to the
default set without a good reason.

No distinction is made between real-mode and virtual-mode hcall
implementations; the one setting controls them both.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:17 +02:00
Mihai Caraman 1f0eeb7e1a KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule
On vcpu schedule, the condition checked for tlb pollution is too loose.
The tlb entries of a vcpu become polluted (vs stale) only when a different
vcpu within the same logical partition runs in-between. Optimize the tlb
invalidation condition keeping last_vcpu per logical partition id.

With the new invalidation condition, a guest shows 4% performance improvement
on P5020DS while running a memory stress application with the cpu oversubscribed,
the other guest running a cpu intensive workload.

Guest - old invalidation condition
  real 3.89
  user 3.87
  sys 0.01

Guest - enhanced invalidation condition
  real 3.75
  user 3.73
  sys 0.01

Host
  real 3.70
  user 1.85
  sys 0.00

The memory stress application accesses 4KB pages backed by 75% of available
TLB0 entries:

char foo[ENTRIES][4096] __attribute__ ((aligned (4096)));

int main()
{
	char bar;
	int i, j;

	for (i = 0; i < ITERATIONS; i++)
        	for (j = 0; j < ENTRIES; j++)
            		bar = foo[j][0];

	return 0;
}

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:16 +02:00
Alexander Graf f396df3518 KVM: PPC: Book3S PR: Fix sparse endian checks
While sending sparse with endian checks over the code base, it triggered at
some places that were missing casts or had wrong types. Fix them up.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:16 +02:00
Alexander Graf da166facd4 KVM: PPC: Book3S PR: Fix ABIv2 on LE
We switched to ABIv2 on Little Endian systems now which gets rid of the
dotted function names. Branch to the actual functions when we see such
a system.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:15 +02:00
Anton Blanchard ad7d4584a2 KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()
Both kvmppc_hv_entry_trampoline and kvmppc_entry_trampoline are
assembly functions that are exported to modules and also require
a valid r2.

As such we need to use _GLOBAL_TOC so we provide a global entry
point that establishes the TOC (r2).

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:14 +02:00
Anton Blanchard 05a308c722 KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue
To establish addressability quickly, ABIv2 requires the target
address of the function being called to be in r12.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:13 +02:00
Alexander Graf 568fccc43f KVM: PPC: Book3S PR: Handle hyp doorbell exits
If we're running PR KVM in HV mode, we may get hypervisor doorbell interrupts.
Handle those the same way we treat normal doorbells.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:12 +02:00
Alexander Graf f6bf3a6622 KVM: PPC: Book3s HV: Fix tlbie compile error
Some compilers complain about uninitialized variables in the compute_tlbie_rb
function. When you follow the code path you'll realize that we'll never get
to that point, but the compiler isn't all that smart.

So just default to 4k page sizes for everything, making the compiler happy
and the code slightly easier to read.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Paul Mackerras <paulus@samba.org>
2014-07-28 15:22:12 +02:00
Alexander Graf fb4188bad0 KVM: PPC: Book3s PR: Disable AIL mode with OPAL
When we're using PR KVM we must not allow the CPU to take interrupts
in virtual mode, as the SLB does not contain host kernel mappings
when running inside the guest context.

To make sure we get good performance for non-KVM tasks but still
properly functioning PR KVM, let's just disable AIL whenever a vcpu
is scheduled in.

This is fundamentally different from how we deal with AIL on pSeries
type machines where we disable AIL for the whole machine as soon as
a single KVM VM is up.

The reason for that is easy - on pSeries we do not have control over
per-cpu configuration of AIL. We also don't want to mess with CPU hotplug
races and AIL configuration, so setting it per CPU is easier and more
flexible.

This patch fixes running PR KVM on POWER8 bare metal for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Paul Mackerras <paulus@samba.org>
2014-07-28 15:22:11 +02:00
Aneesh Kumar K.V 06da28e76b KVM: PPC: BOOK3S: PR: Emulate instruction counter
Writing to IC is not allowed in the privileged mode.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:22:10 +02:00
Aneesh Kumar K.V 8f42ab2749 KVM: PPC: BOOK3S: PR: Emulate virtual timebase register
virtual time base register is a per VM, per cpu register that needs
to be saved and restored on vm exit and entry. Writing to VTB is not
allowed in the privileged mode.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[agraf: fix compile error]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:21:50 +02:00
Mark Brown 404d4df260 regulator: lp872x: Don't set constraints within the regulator driver
Regulator drivers should not be specifying constraints since the valid
configurations depend on how the device is used in a given system, there
is no way to know if a configuration is safe for a given board.

Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-28 13:19:23 +01:00
Arnd Bergmann 1c607f0af0 Merge tag 'v3.17-rockchip-rk3xxx-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Merge "ARM: dts: changes for existing rockchip boards" from Heiko Stuebner:

Collected changes for existing Rockchip boards
- convert to new clock driver
- bring structure in line with recent rk3288 comments
  (no soc-nodes, using phandles when adding changes, sorted by address)
- i2c, board-pmic and pwm nodes nodes
- sd card slot and ir receiver on radxa rock

* tag 'v3.17-rockchip-rk3xxx-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rk3188-radxarock: add GPIO IR receiver node
  ARM: dts: rockchip: add pwm nodes
  ARM: dts: rockchip: add both clocks to uart nodes
  ARM: dts: rk3188-radxarock: enable sd-card slot
  ARM: dts: add i2c and regulator nodes to rk3188-radxarock
  ARM: dts: rockchip: add tps65910 regulator for bqcurie2
  ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settings
  ARM: dts: rockchip: oder nodes by register address
  ARM: dts: rockchip: remove address from pinctrl nodes
  ARM: dts: uses handles to reference nodes for changes
  ARM: dts: rockchip: add handles for shared nodes that don't have one yet
  ARM: dts: rockchip: remove soc subnodes
  arm: dts: rockchip: remove obsolete clock gate definitions
  ARM: dts: rockchip: move oscillator input clock into main dtsi
  ARM: dts: rockchip: add cru nodes and update device clocks to use it

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-28 14:16:24 +02:00
Arnd Bergmann b99cfa66e1 Merge tag 'v3.17-rockchip-rk3288' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Merge "Initial support for Rockchip RK3288 SoCs" from Heiko Stuebner:

* tag 'v3.17-rockchip-rk3288' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: Build dtbs for Rockchip boards
  ARM: dts: add rk3288 evaluation board
  ARM: dts: rockchip: add core rk3288 dtsi
  ARM: rockchip: enable support for RK3288 SoCs
  ARM: Kconfig: set default gpio number for rockchip SoCs
  ARM: rockchip: add debug uart used by rk3288
  ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll options
  dt-bindings: arm: add cortex-a12 and cortex-a17 cpu compatible properties

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-28 14:15:34 +02:00
Arnd Bergmann 3fdef7e3bc Merge branch 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux into next/soc
This is a dependency for the rk3288 DT updates, the branch should
first get merged through Mike's clk git.

* 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux:
  ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER
  clk: rockchip: add clock controller for rk3288
  dt-bindings: add documentation for rk3288 cru
  clk: rockchip: add clock driver for rk3188 and rk3066 clocks
  dt-bindings: add documentation for rk3188 clock and reset unit
  clk: rockchip: add reset controller
  clk: rockchip: add clock type for pll clocks and pll used on rk3066
  clk: rockchip: add basic infrastructure for clock branches
  clk: composite: improve rate_hw sanity check logic
  clk: composite: allow read-only clocks
  clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-28 14:15:25 +02:00
Arnd Bergmann 5be42f334b Merge branch 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux into next/soc
This is a dependency for the rk3288 DT updates, the branch should
first get merged through Mike's clk git.

* 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux:
  ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER
  clk: rockchip: add clock controller for rk3288
  dt-bindings: add documentation for rk3288 cru
  clk: rockchip: add clock driver for rk3188 and rk3066 clocks
  dt-bindings: add documentation for rk3188 clock and reset unit
  clk: rockchip: add reset controller
  clk: rockchip: add clock type for pll clocks and pll used on rk3066
  clk: rockchip: add basic infrastructure for clock branches
  clk: composite: improve rate_hw sanity check logic
  clk: composite: allow read-only clocks
  clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-28 14:02:13 +02:00
Vinod Koul db0e701819 Merge commit 'renesas-rcar-audmapp-for-v3.17' into for-linus 2014-07-28 17:26:36 +05:30
Mimi Zohar b64cc5fb85 KEYS: revert encrypted key change
Commit fc7c70e "KEYS: struct key_preparsed_payload should have two
payload pointers" erroneously modified encrypted-keys.  This patch
reverts the change to that file.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-28 12:36:17 +01:00
Peter Ujfalusi 8e8805d5bf dmaengine: edma: Serve cyclic (audio) channels with high priority queue
Move the DMA channel used in cyclic mode (audio) to the highest priority
event queue which helps to reduce audio problems.
When the channel is terminated, move it back to the default queue.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 17:03:16 +05:30
Peter Ujfalusi eb3fe7def6 ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue
In some cases it is desired to move a channel to a specific event queue.
Such a use case is audio, where it is preferred that it is served with
highest priority compared to other DMA clients.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 17:03:13 +05:30
Peter Ujfalusi 85a70762b7 ARM: edma: Set default queue to lowest priority
Use the lowest priority queue as default for clients.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 17:03:09 +05:30
Peter Ujfalusi a1f146f317 dmaengine: edma: Support to suppress the period interrupts in cyclic mode
If the client (audio) does not request interrupts for every period we can
disable them.
With updated audio driver stack we can play audio w/o the need to process
any edma interrupts.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 17:02:53 +05:30
Peter Ujfalusi b7f9bc5267 dmaengine: edma: Update caps->residue_granularity to match with reality
The edma can report accurate DMA position so update the residue_granularity
to DMA_RESIDUE_GRANULARITY_BURST.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 17:02:33 +05:30
Alexandre Courbot 39b2bbe3d7 gpio: add flags argument to gpiod_get*() functions
The huge majority of GPIOs have their direction and initial value set
right after being obtained by one of the gpiod_get() functions. The
integer GPIO API had gpio_request_one() that took a convenience flags
parameter allowing to specify an direction and value applied to the
returned GPIO. This feature greatly simplifies client code and ensures
errors are always handled properly.

A similar feature has been requested for the gpiod API. Since setting
the direction of a GPIO is so often the very next action done after
obtaining its descriptor, we prefer to extend the existing functions
instead of introducing new functions that would raise the
number of gpiod getters to 16 (!).

The drawback of this approach is that all gpiod clients need to be
updated. To limit the pain, temporary macros are introduced that allow
gpiod_get*() to be called with or without the extra flags argument. They
will be removed once all consumer code has been updated.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:28:05 +02:00
Sachin Kamat 9b5b33f625 MAINTAINERS: Update Samsung pin control entry
Update to reflect the recent file movement to a sub-directory.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:25:21 +02:00
Mika Westerberg afa82fab5e gpio / ACPI: Move event handling registration to gpiolib irqchip helpers
Since now we have irqchip helpers that the GPIO chip drivers are supposed
to use if possible, we can move the registration of ACPI events to happen
in these helpers. This seems to be more natural place and might encourage
GPIO chip driver writers to take advantage of the irqchip helpers.

We make the functions available to GPIO chip drivers via private gpiolib.h,
just in case generic irqchip helpers are not suitable.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:23:57 +02:00
Mika Westerberg 7f87210eff gpio: lynxpoint: Convert to use gpiolib irqchip
Instead of open-coding irqchip handling in the driver we can take advantage
of the new irqchip helpers provided by the gpiolib core.

While doing this we also make sure that we call gpiochip_irqchip_add()
after the gpiochip itself is registered as required.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:23:56 +02:00
Linus Walleij 0a6d315827 gpio: split gpiod board registration into machine header
As per example from the regulator subsystem: put all defines and
functions related to registering board info for GPIO descriptors
into a separate <linux/gpio/machine.h> header.

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:23:35 +02:00
Mika Westerberg e1ee5c578f pinctrl: baytrail: Convert to use gpiolib irqchip
Instead of open-coding irqchip handling in the driver we can take advantage
of the new irqchip helpers provided by the gpiolib core.

While doing this we also make sure that we call gpiochip_irqchip_add()
after the gpiochip itself is registered as required.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:21:00 +02:00
Chen-Yu Tsai 343f132752 pinctrl: sunxi: number gpio ranges starting from 0
The pinctrl-sunxi driver originally used the pin number as the gpio
range offset. This resulted in large, bogus gpio numbers for the
new sun6i-a31-r pinctrl devices.

This patch makes the driver number the gpios ranges starting from an
offset of 0, by subtracting the pin_base number from the pin number.
This also makes the system-wide gpio number match the pin number.

Tested on sun8i with sysfs exported gpios.

This patch also changes the GPIO bindings for R_PIO:

    gpios = <&r_pio B N flag>;

Where B originally was the pinbank label (L or M) counted from A,
with this patch it becomes (L or M) counted from its pinbank base (L).

Thus

    gpios = <&r_pio 10 11 0>; /* PL11 */

becomes

    gpios = <&r_pio 0 11 0>; /* PL11 */

IMO this is correct, as the binding shows the bank offset and pin offset
within the bank for the GPIO controller. But I'm worried it might be a
bit confusing.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:14:33 +02:00
Chen-Yu Tsai f83549d61d pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
When an IRQ is started on a GPIO line, mark this GPIO as IRQ in
the gpiolib so we can keep track of the usage centrally.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:10:46 +02:00
Charles Keepax 30a2af3a32 mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it
We only request the control interface error IRQ if we set ctrlif_error,
as such we should only free it in that situation. Otherwise we will
attempt to free an IRQ we never requested and get a warning from the IRQ
core.

This patch moves the ctrlif_error variable into the arizona structure
and checks it in all cases we free the control interface error IRQ.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28 11:01:47 +01:00
Charles Keepax 6e440d27aa mfd: arizona: Add missing handling for ISRC3 under/overclocked
Some parts have a third ISRC, this patch adds handling for the under and
overclocked interrupts from this ISRC.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28 11:01:45 +01:00
Charles Keepax 3215501fc9 mfd: wm5110: Add new interrupt register definitions
Newer versions of the IP have a lot of new interrupts and move several
existing interrupts. This patch adds the register definitions and regmap
hookup for these interrupts.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28 11:01:42 +01:00
Chen-Yu Tsai 495bccf391 ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
dtc was giving warnings for missing #address-cells and #size-cells for
the new sun6i-a31-hummingbird.dts, which has a i2c-based rtc device.

This patch adds the properties for all i2c controller nodes for sun6i.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-28 11:34:39 +02:00
Yan, Zheng 06fee30f6a ceph: fix append mode write
generic_write_checks() may update 'pos', so we need to pass 'pos'
to ceph_sync_write() and ceph_sync_direct_write();

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-28 13:29:33 +04:00
Ilya Dryomov 7e8a295295 ceph: fix sizeof(struct tYpO *) typo
struct ceph_xattr -> struct ceph_inode_xattr

Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-28 13:29:27 +04:00
Ilya Dryomov 1a295bd8c8 ceph: remove redundant memset(0)
xattrs array of pointers is allocated with kcalloc() - no need to
memset() it to 0 right after that.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-28 13:28:33 +04:00
Andreas Färber f07ab7a0f3 ARM: dts: zynq: Add SPI
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-28 11:09:23 +02:00