Commit Graph

480699 Commits

Author SHA1 Message Date
Beniamino Galvani 550c7f4e63 ARM: dts: rockchip: add pwm nodes
This adds the necessary nodex and pinctrl settings for the Rockchip PWM-driver.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>

Modified to use the new clock defines and added rk3066 pins.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27 00:24:16 +02:00
Linus Torvalds 2062afb4f8 Fix gcc-4.9.0 miscompilation of load_balance() in scheduler
Michel Dänzer and a couple of other people reported inexplicable random
oopses in the scheduler, and the cause turns out to be gcc mis-compiling
the load_balance() function when debugging is enabled.  The gcc bug
apparently goes back to gcc-4.5, but slight optimization changes means
that it now showed up as a problem in 4.9.0 and 4.9.1.

The instruction scheduling problem causes gcc to schedule a spill
operation to before the stack frame has been created, which in turn can
corrupt the spilled value if an interrupt comes in.  There may be other
effects of this bug too, but that's the code generation problem seen in
Michel's case.

This is fixed in current gcc HEAD, but the workaround as suggested by
Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments
when compiling the kernel, which disables the gcc code that causes the
problem.  This can result in slightly worse debug information for
variable accesses, but that is infinitely preferable to actual code
generation problems.

Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows
non-debug builds to verify that the debug build would be identical: we
can do

    export GCC_COMPARE_DEBUG=1

to make gcc internally verify that the result of the build is
independent of the "-g" flag (it will make the compiler build everything
twice, toggling the debug flag, and compare the results).

Without the "-fno-var-tracking-assignments" option, the build would fail
(even with 4.8.3 that didn't show the actual stack frame bug) with a gcc
compare failure.

See also gcc bugzilla:

  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801

Reported-by: Michel Dänzer <michel@daenzer.net>
Suggested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-26 14:52:01 -07:00
Heiko Stuebner 69667ca2c4 ARM: dts: rockchip: add both clocks to uart nodes
Use the newly ammended dw_8250 clock binding to define both the baudclk as
well as the pclk supplying the ip.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:44:15 +02:00
Heiko Stuebner b09e35a388 ARM: dts: rk3188-radxarock: enable sd-card slot
The Radxa Rock contains one sd-card slot. Add the supplying regulator
and enable its dw_mmc node.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:43:59 +02:00
Beniamino Galvani fe2c89afa7 ARM: dts: add i2c and regulator nodes to rk3188-radxarock
This enables the 2nd i2c bus and adds the act8846 pmic as device.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:40:46 +02:00
Heiko Stuebner a953a6c77d ARM: dts: rockchip: add tps65910 regulator for bqcurie2
The Curie2 uses a tps659102 as its main pmic, so add the i2c1 and tps65910
node as well as define the used voltages and regulator-names according to
the schematics.

Also fix the supply of the sd0 regulator, as it is supplied by the vio reg.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:39:13 +02:00
Hugh Dickins 8bdd638091 mm: fix direct reclaim writeback regression
Shortly before 3.16-rc1, Dave Jones reported:

  WARNING: CPU: 3 PID: 19721 at fs/xfs/xfs_aops.c:971
           xfs_vm_writepage+0x5ce/0x630 [xfs]()
  CPU: 3 PID: 19721 Comm: trinity-c61 Not tainted 3.15.0+ #3
  Call Trace:
    xfs_vm_writepage+0x5ce/0x630 [xfs]
    shrink_page_list+0x8f9/0xb90
    shrink_inactive_list+0x253/0x510
    shrink_lruvec+0x563/0x6c0
    shrink_zone+0x3b/0x100
    shrink_zones+0x1f1/0x3c0
    try_to_free_pages+0x164/0x380
    __alloc_pages_nodemask+0x822/0xc90
    alloc_pages_vma+0xaf/0x1c0
    handle_mm_fault+0xa31/0xc50
  etc.

 970   if (WARN_ON_ONCE((current->flags & (PF_MEMALLOC|PF_KSWAPD)) ==
 971                   PF_MEMALLOC))

I did not respond at the time, because a glance at the PageDirty block
in shrink_page_list() quickly shows that this is impossible: we don't do
writeback on file pages (other than tmpfs) from direct reclaim nowadays.
Dave was hallucinating, but it would have been disrespectful to say so.

However, my own /var/log/messages now shows similar complaints

  WARNING: CPU: 1 PID: 28814 at fs/ext4/inode.c:1881 ext4_writepage+0xa7/0x38b()
  WARNING: CPU: 0 PID: 27347 at fs/ext4/inode.c:1764 ext4_writepage+0xa7/0x38b()

from stressing some mmotm trees during July.

Could a dirty xfs or ext4 file page somehow get marked PageSwapBacked,
so fail shrink_page_list()'s page_is_file_cache() test, and so proceed
to mapping->a_ops->writepage()?

Yes, 3.16-rc1's commit 68711a7463 ("mm, migration: add destination
page freeing callback") has provided such a way to compaction: if
migrating a SwapBacked page fails, its newpage may be put back on the
list for later use with PageSwapBacked still set, and nothing will clear
it.

Whether that can do anything worse than issue WARN_ON_ONCEs, and get
some statistics wrong, is unclear: easier to fix than to think through
the consequences.

Fixing it here, before the put_new_page(), addresses the bug directly,
but is probably the worst place to fix it.  Page migration is doing too
many parts of the job on too many levels: fixing it in
move_to_new_page() to complement its SetPageSwapBacked would be
preferable, except why is it (and newpage->mapping and newpage->index)
done there, rather than down in migrate_page_move_mapping(), once we are
sure of success? Not a cleanup to get into right now, especially not
with memcg cleanups coming in 3.17.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-26 14:38:50 -07:00
Heiko Stuebner 9cdffd8cb9 ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settings
The core controller settings themself are identical, only the compatible and
pinctrl settings differ.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:35:29 +02:00
Heiko Stuebner ff84b90ecd ARM: dts: rockchip: oder nodes by register address
To create some sort of ordering of nodes, they are suggested to be ordered by
their register address.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:28:03 +02:00
Heiko Stuebner 6e4b3b4b66 ARM: dts: rockchip: remove address from pinctrl nodes
The pincontroller uses the GRF and PMU syscons nowadays, so should not
contain an address in its device node.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:22:43 +02:00
Heiko Stuebner fcbbf96525 ARM: dts: uses handles to reference nodes for changes
Use the handles for subsequent changes to nodes, similar to like the rk3288
submission does it.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:19:56 +02:00
Heiko Stuebner e40b43d6ea ARM: dts: rockchip: add handles for shared nodes that don't have one yet
Some nodes that are changed in the dtsi hierarchy do not have handles yet.
As it was suggested in the rk3288 submission to do subsequent nodes changes
through such handle-references, add the missing ones.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:19:50 +02:00
Heiko Stuebner c3030d30d9 ARM: dts: rockchip: remove soc subnodes
Comments received from the rk3288 submission indicated that a generic subnode
to group soc components should not be used.

So to keep all rockchip devicetree files similar, remove it from rk3066 and rk3188.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:19:06 +02:00
Heiko Stuebner d356d96f85 arm: dts: rockchip: remove obsolete clock gate definitions
The clock and reset unit is now provided by the rk3188-cru clock driver and thus
the old style definitions of the gate clocks can go away.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-By: Max Schwarz <max.schwarz@online.de>
Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-26 23:15:33 +02:00
Heiko Stuebner 560106c1ca ARM: dts: rockchip: move oscillator input clock into main dtsi
The clock definitions get a lot shorter due to the soc clocks being handled by
rk3188-cru and only the input clock remains. These can now simply live
in the main rk3xxx.dtsi without affecting readability.

At the same time, rename the node to oscillator, adding a clock-output-names
property to match how the rk3288 handles this.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-By: Max Schwarz <max.schwarz@online.de>
Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-26 23:15:31 +02:00
Heiko Stuebner b13d2a7b43 ARM: dts: rockchip: add cru nodes and update device clocks to use it
This adds a node for the clock and reset unit on rk3188 and rk3066 SoCs and
also updates the device nodes retrieve their clocks from there, instead of
the previous gate clock nodes.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-By: Max Schwarz <max.schwarz@online.de>
Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-26 23:15:22 +02:00
Yunkang Tang 3808843cf1 Input: alps - add support for v7 devices
Such as found on the new Toshiba Portégé Z30-A and Z40-A.

Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com>
[hdegoede@redhat.com: Remove softbutton handling, this is done in userspace]
[hdegoede@redhat.com: Report INPUT_PROP_BUTTONPAD]
[hdegoede@redhat.com: Do not report fake PRESSURE, reporting BTN_TOUCH is
 enough]
[hdegoede@redhat.com: Various cleanups / refactoring]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:20 -07:00
Hans de Goede c0cd17f6dc Input: alps - cache firmware version
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:19 -07:00
Hans de Goede 38c11eaaab Input: alps - change decode function prototype to return an int
So that decode functions can return a failure when appropriate.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:18 -07:00
Hans de Goede 99d9996c5c Input: alps - report 2 touches when we've > 2 fingers
If we detect more then 2 fingers report 2 touches, rather then only
reporting the upper left corner of the bounding box.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:18 -07:00
Hans de Goede 68c2187017 Input: alps - add an alps_report_semi_mt_data function
Move all the semi-mt specific handling shared between the v3 and v4
handling code to a common helper function.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:17 -07:00
Hans de Goede c38a448a23 Input: alps - use single touch data when v3 mt data contains only one finger
For v3 protocol devices, use the more accurate single touch data when the
mt data contains only one finger. Note the mt data reporting a finger count
of 1 should never happen, but better safe then sorry.

This brings the v3 bitmap handling in line with what the v4 code does,
allowing to factor out the common bits into a helper function.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:17 -07:00
Hans de Goede cdf333efdc Input: alps - use standard contact tracking instead of DIY
When there are 2 fingers on the pad we don't know which one is which, so
use input_mt_assign_slots to make sure the right set of coordinates ends
up in the right slot.

Besides ensuring things end up in the right slot, this also results in a
nice cleanup, since sync_frame also handles non mt position and btn_touch
reporting.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:16 -07:00
Hans de Goede 02d04254a5 Input: alps - use struct input_mt_pos to track coordinates
This is a preparation patch for switching the DIY mt handling to using
input_mt_assign_slots && input_mt_sync_frame.

struct alps_fields is quite large, so while making changes to almost all uses
of it lets put it in our priv data instead of on the stack.

Having it in our priv data also allows using it directly for storing values
which need to be cached, rather then having separate x, y, z, fingers, etc.
copies in our priv data.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:16 -07:00
Hans de Goede 28835f4540 Input: alps - process_bitmap: round down when spreading adjescent fingers over 2 points
This fixes 2 fingers at the same height or width on the touchpad getting
reported at different y / x coordinates.

Note num_bits is always at least 1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:15 -07:00
Hans de Goede 105affbfd5 Input: alps - process_bitmap: fix counting of high point bits
alps_process_bitmap was resetting the point bit-count as soon as it saw
2 0 bits in a row. This means that unless the high point actually is at
the end of the bitmap, it would always get its num_bits set to 0.

Instead reset num_bits to 0 on a 0->1 transition, so that with > 2 fingers
we only count the number of bits occupied by the highest finger.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:15 -07:00
Hans de Goede 036e6c7b54 Input: alps - process_bitmap: add alps_get_bitmap_points() helper function
Factor out the identical code for getting the bitmap points for x and y into
a helper function.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:14 -07:00
Hans de Goede 40e8f53bff Input: alps - process_bitmap: don't invert the Y-axis on Rushmore
Rushmore models don't have the Y-axis data in the bitmap inverted. Since
we now have 2 different Y orientations, make the Y bitmap data processing
use a forward loop like the X bitmap data processing, unifying the 2,
and invert the data later, except on Rushmore.

So far no-one has noticed this because the synaptics driver only uses the
non mt coordinates (except on clickpads, and there are no alps clickpads
using process_bitmap).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:13 -07:00
Hans de Goede 20bea68bd1 Input: alps - improve 2-finger reporting on v3 models
V3 models only report mt bitmap data when there are 2 or more fingers on
the touchpad. So always generate 2 positions in alps_process_bitmap, and
for v3 models only fall back to st data when there was no mt data in a
mt packet (which should never happen).

This fixes 2 finger scrolling not working when using 2 fingers close to
each other.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:13 -07:00
Yunkang Tang f105e34a4e Input: alps - fix rushmore packet decoding
Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:12 -07:00
Sonic Zhang 0a6824bc10 [media] v4l2: blackfin: select proper pinctrl state in ppi_set_params if CONFIG_PINCTRL is enabled
Multiple pinctrl states are defined for 8, 16 and 24 data pin groups in PPI peripheral.
The driver should select correct group before set up further PPI parameters.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 17:15:16 -03:00
Sonic Zhang 7ba3c21c17 [media] v4l2: bfin: Ensure delete and reinit list entry on NOMMU architecture
On NOMMU architecture page fault is not triggered if a deleted list entry is
accessed without reinit.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 17:14:14 -03:00
Sonic Zhang f7d0e6d67f [media] media: blackfin: ppi: Pass device pointer to request peripheral pins
if the pinctrl driver is enabled.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 17:12:30 -03:00
Jeff Oczek 45c2fc821d staging: rtl8188eu: Fix static symbol sparse warnings
Fix sparse warnings:
drivers/staging/rtl8188eu/core/rtw_cmd.c:52:5: warning:
  symbol '_rtw_enqueue_cmd' was not declared. Should it be static?
drivers/staging/rtl8188eu/core/rtw_wlan_util.c:1225:5: warning:
  symbol 'wifirate2_ratetbl_inx' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c:25:4: warning:
  symbol 'ODM_GetRightChnlPlaceforIQK' was not declared. Should it be static?
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:3109:5: warning:
  symbol 'rtw_ioctl' was not declared. Should it be static?

Signed-off-by: Jeff Oczek <jeffoczek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-26 13:07:35 -07:00
Frank Schaefer 3d3a41098e [media] em28xx-v4l: fix disabling ioctl VIDIOC_S_PARM for vbi devices
Fixes an old copy+paste bug that has survived all recent code
changes in this code area.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 16:45:47 -03:00
Frank Schaefer 747dba7de2 [media] em28xx-v4l: get rid of field "users" in struct em28xx_v4l2
Instead of counting the number of opened file handles, use function
v4l2_fh_is_singular_file() in em28xx_v4l2_open() and em28xx_v4l2_close() to
determine if the file handle is the first/last opened one.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 16:45:14 -03:00
Frank Schaefer 3c0f90e14c [media] em28xx-v4l: simplify em28xx_v4l2_open() by using v4l2_fh_open()
Instead of calling

...
struct v4l2_fh *fh = kzalloc(sizeof(*fh), GFP_KERNEL);
filp->private_data = fh;
v4l2_fh_init(fh, vdev);
v4l2_fh_add(fh);
...

simply use function v4l2_fh_open() which does all of these calls for us.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 16:44:30 -03:00
Frank Schaefer 917ba6b0b6 [media] em28xx-v4l: get rid of struct em28xx_fh
struct em28xx_fh isn't needed anymore because the only used field which is left is struct v4l2_fh fh.
Use struct v4l2_fh directly and remvove struct em28xx_fh.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 16:43:41 -03:00
Frank Schaefer 5015389fda [media] em28xx-v4l: simplify some pointers in em28xx_init_camera()
Pointer v4l2" can be used instead of "dev->v4l2, which saves some characters.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 16:42:28 -03:00
Zheng Di 381d7f79da [media] staging: media: lirc_parallel.c: fix coding style
This patch fix checkpatch:
WARNING: else is not generally useful after a break or return
WARNING: line over 80 characters

[m.chehab@samsung.com: Fix conflicts and use a better coding style for
 passing the parameters to parport_register_device()]
Signed-off-by: Zheng Di <zhengdi05@gmail.com>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 16:34:51 -03:00
Raimonds Cicans ad86faada7 [media] Fix typo in comments
Expression ((7bit i2c_addr << 1) & 0x01) can not be right
because it is always 0

Signed-off-by: Raimonds Cicans <ray@apollo.lv>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 15:09:47 -03:00
Rasmus Villemoes c6e58110da [media] staging: omap4iss: Fix type of struct iss_device::crashed
The crashed member of struct iss_device is documented to be a bitmask,
but a bool doesn't hold that many (usable) bits. Lines 589 and 659 of
iss.c strongly suggest that "unsigned int" was meant (the same type as
struct iss_pipeline::entities). Currently, any crashed entity will be
blamed on index 0, which is unlikely to be what was intended.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 15:04:09 -03:00
Himangi Saraogi 56a65a1eb0 [media] staging: lirc: Introduce the use of managed interfaces
This patch introduces the use of managed interfaces like
devm_request_mem_region and devm_request_irq and does away with the
calls to free the allocated memory in the probe and remove functions.
The remove function is no longer required and is removed completely.

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 15:02:16 -03:00
Raphael Poggi 280373533f [media] staging: lirc: remove return void function
This patch fix checkpath "WARNING: void function return statements are not generally useful".
The removed return were useless in that case.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 15:01:20 -03:00
Raphael Poggi b799455ef3 [media] staging: lirc: fix checkpath errors: blank lines
This patch fix checkpath "WARNING: Missing a blank line after declarations"

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 15:00:48 -03:00
Christopher Reimer 93961435d0 [media] ddbridge: Add IDs for several newer Digital Devices cards
This patch adds the necessary IDs for the following dvb cards:

Digital Devices Octopus Mini
Digital Devices Cine S2 V6.5
Digital Devices DVBCT V6.1
Digital Devices Octopus V3
Mystique SaTiX-S2 V3

All these changes are taken from the official driver package by Digital
Devices.
http://download.digital-devices.de/download/linux/

[m.chehab@samsung.com: Fixed whitespace mangling]
Signed-off-by: Christopher Reimer <mail@creimer.net>
Tested-by: "D. Herrendoerfer" <d.herrendoerfer@herrendoerfer.name>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 15:00:01 -03:00
Fabian Frederick 0ee4c2ac18 [media] drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c: remove unnecessary null test before usb_free_urb
Fix checkpatch warning:
WARNING: usb_free_urb(NULL) is safe this check is probably not required

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 14:55:00 -03:00
Georg Lukas 729a1051da Bluetooth: Expose default LE advertising interval via debugfs
Expose the default values for minimum and maximum LE advertising
interval via debugfs for testing purposes.

Signed-off-by: Georg Lukas <georg@op-co.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-26 19:05:10 +02:00
Georg Lukas 628531c9e9 Bluetooth: Provide defaults for LE advertising interval
Store the default values for minimum and maximum advertising interval
with all the other controller defaults. These vaules are sent to the
adapter whenever advertising is (re)enabled.

Signed-off-by: Georg Lukas <georg@op-co.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-26 19:05:09 +02:00
Arnd Bergmann 39fbf98408 Merge tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu into next/soc
Merge "mvebu SoC changes for v3.17 (round 4)" from Jason Cooper:

 - Armada XP
    - Fix return value check in pmsu code
    - Document URLs for new public datasheets (Thanks, Marvell & free-electrons!)

 - Armada 370/38x
    - Add cpuidle support

 - mvebu
    - Fix build when no platforms are selected
    - Update EBU SoC status in docs

* tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu: (21 commits)
  Documentation: arm: misc updates to Marvell EBU SoC status
  Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
  ARM: mvebu: fix build without platforms selected
  ARM: mvebu: add cpuidle support for Armada 38x
  ARM: mvebu: add cpuidle support for Armada 370
  cpuidle: mvebu: add Armada 38x support
  cpuidle: mvebu: add Armada 370 support
  cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
  ARM: mvebu: export the SCU address
  ARM: mvebu: make the snoop disabling optional in mvebu_v7_pmsu_idle_prepare()
  ARM: mvebu: use a local variable to store the resume address
  ARM: mvebu: make the cpuidle initialization more generic
  ARM: mvebu: rename the armada_370_xp symbols to mvebu_v7 in pmsu.c
  ARM: mvebu: use the common function for Armada 375 SMP workaround
  ARM: mvebu: add a common function for the boot address work around
  ARM: mvebu: sort the #include of pmsu.c in alphabetic order
  ARM: mvebu: split again armada_370_xp_pmsu_idle_enter() in PMSU code
  ARM: mvebu: fix return value check in armada_xp_pmsu_cpufreq_init()
  clk: mvebu: extend clk-cpu for dynamic frequency scaling
  ARM: mvebu: extend PMSU code to support dynamic frequency scaling
  ...

Conflicts:
	arch/arm/mach-mvebu/Kconfig
	drivers/cpuidle/cpuidle-armada-370-xp.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26 18:17:08 +02:00