In the clocksource driver, we didn't explicitly enable the clock. it makes the
clk reference counter wrong. We didn't encounter any hang issue because the
tick's clock input has been open and is shared by some other hardware
components, but if we don't enable those components in kernel, in the stage of
disabling unused clk in kernel boot, Linux tick hangs.
This patch fixes it. it does an explicit prepare and enable to the clock input,
and increases the usage counter of the clk.
Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In 'em_sti.c', it will call devm_ioremap_resource() which need
HAS_IOMEM. So need let EM_TIMER_STI depend on HAS_IOMEM, too.
The related error (with allmodconfig under score):
LD init/built-in.o
em_sti.c:(.text.em_sti_probe+0x84): undefined reference to `devm_ioremap_resource'
make: *** [vmlinux] Error 1
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This patch adds a clock source and clock event for the timer found
on the Mediatek SoCs.
The Mediatek General Purpose Timer block provides five 32 bit timers and
one 64 bit timer.
Two 32 bit timers are used by this driver:
TIMER1: clock events supporting periodic and oneshot events
TIMER2: clock source configured as a free running counter
The General Purpose Timer block can be run with two clocks. A 13 MHz system
clock and the RTC clock running at 32 KHz. This implementation uses the system
clock with no clock source divider.
The interrupts are shared between the different timers and have to be read back
from a register. We just enable one interrupt for the clock event. The clock
event timer is used by all cores.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
A call to of_iomap does not request the memory region. This patch adds the
function of_io_request_and_map which requests the memory region before
mapping it.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Adds ability to shutdown all CPUs except the first one
(since it might be special for a lot of platforms).
It is now possible to use kexec which requires such a feature.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When compiling for multiplatform for both ARMv6 and ARMv7, the default
compiler flags are for ARMv6, and the following cpu-hotplug change will
fail with:
/tmp/ccSFxfmI.s:68: Error: selected processor does not support ARM mode `isb '
/tmp/ccSFxfmI.s:74: Error: selected processor does not support ARM mode `isb '
/tmp/ccSFxfmI.s:75: Error: selected processor does not support ARM mode `dsb '
Fix this in a similar manner as in commit 9f0affcf3e "ARM: mvebu: Fix pmsu
compilation when ARMv6 is selected", by specifying ARMv7 flags for platsmp.o.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Define voltages and properties for various twl4030
regulators used on gta04 board.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Define alias for lcd display present on gta04 board.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Define USB Host port mode and the PHY device.
Also provide pin multiplexer information for USB host
pins.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Because of commit: 3d49538364
spi_gpio_pins node isn't valid anymore. Move to pmx_core2 node.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Define gpio node in tca6507 which will be used as
wifi reset pin.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
gta04 is using hmc5883l not hmc5843 so fix wrong compatible
entry.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the needed sections to enable nand support on
gta04 board.
Add nand partitions information.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds bch8 ecc software fallback which is mostly used by
omap3s because they lack hardware elm support.
Fixes: 0611c41934 (ARM: OMAP2+: gpmc:
update gpmc_hwecc_bch_capable() for new platforms and ECC schemes)
Cc: <stable@vger.kernel.org> # 3.15.x+
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As we start to decomission the return value from gpiochip_remove()
the compilers emit warnings due to the function being tagged
__must_check. So drop this until we remove the return value
altogether.
Cc: Abdoulaye Berthe <berthe.ab@gmail.com>
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The DRA74/72 control module pins have a weak pull up and pull down.
This is configured by bit offset 17. if BIT(17) is 1, a pull up is
selected, else a pull down is selected.
However, this pull resisstor is applied based on BIT(16) -
PULLUDENABLE - if BIT(18) is *0*, then pull as defined in BIT(17) is
applied, else no weak pulls are applied. We defined this in reverse.
Reference: Table 18-5 (Description of the pad configuration register
bits) in Technical Reference Manual Revision (DRA74x revision Q:
SPRUHI2Q Revised June 2014 and DRA72x revision F: SPRUHP2F - Revised
June 2014)
Fixes: 6e58b8f1da ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board")
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A reference to ARCH_HAS_OPP was added in commit 333d17e56 (arm64: add
ARCH_HAS_OPP to allow enabling OPP library) however this symbol is no
longer needed after commit 049d595a4d (PM / OPP: Make OPP invisible
to users in Kconfig).
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In the recent commit b50a6c584b "Clear MMCR2 when enabling PMU", I
screwed up the handling of MMCR2 for tasks using EBB.
We must make sure we set MMCR2 *before* ebb_switch_in(), otherwise we
overwrite the value of MMCR2 that userspace may have written. That
potentially breaks a task that uses EBB and manually uses MMCR2 for
event freezing.
Fixes: b50a6c584b ("powerpc/perf: Clear MMCR2 when enabling PMU")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
INV cmd for dcache provides 2 modes discard or wback-before-discard.
One is default and other needs to be set, if so desired. This is common
for line-op/entire-cache-op. So refactor them out into a helper
Doesn't affect generated code but paves way for any common
micro-optimization.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* print aliasing or not, VIPT/PIPT etc
* compress param storage using bitfields
* more use of IS_ENABLED to de-uglify code
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Hardware keeps them enabled on reset, and Linux needs to keep status quo.
Any spurious interrupts will be reported/blocked by genirq.
This helps remove a SMP IRQ quirk (next commit), where a peripheral IRQ
is hard wired to core0, and request_irq()->unmask() happens on core1,
keeping the IRQ masked on core0, needing an explicit unmask.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The current cpu-private IRQ registration is ugly as it requires need to
expose arch_unmask_irq() outside of intc code.
So switch to percpu IRQ APIs:
-request_percpu_irq [boot core]
-enable_percpu_irq [all cores]
Encapsulated in helper arc_request_percpu_irq()
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Historically we've exposed the full backlight PWM duty cycle range to
the userspace, in the name of "mechanism, not policy". However, it turns
out there are both panels and board designs where there is a minimum
duty cycle that is required for proper operation. The minimum duty cycle
is available in the VBT.
The backlight class sysfs interface does not make any promises to the
userspace about the physical meaning of the range
0..max_brightness. Specifically there is no guarantee that 0 means off;
indeed for acpi_backlight 0 usually is not off, but the minimum
acceptable value.
Respect the minimum backlight, and expose the range acceptable to the
hardware as 0..max_brightness to the userspace via the backlight class
device; 0 means the minimum acceptable enabled value. To switch off the
backlight, the user must disable the encoder.
As a side effect, make the backlight class device max brightness and
physical PWM modulation frequency (i.e. max duty cycle)
independent. This allows a follow-up patch to virtualize the max value
exposed to the userspace.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: s/BUG_ON/WARN_ON/]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
semaphore _sync_seqno, _seqno and _mbox are smaller than number of rings.
This optimization is to remove the ring itself from the list and the logic to do that
is at intel_ring_sync_index as below:
/*
* rcs -> 0 = vcs, 1 = bcs, 2 = vecs, 3 = vcs2;
* vcs -> 0 = bcs, 1 = vecs, 2 = vcs2, 3 = rcs;
* bcs -> 0 = vecs, 1 = vcs2. 2 = rcs, 3 = vcs;
* vecs -> 0 = vcs2, 1 = rcs, 2 = vcs, 3 = bcs;
* vcs2 -> 0 = rcs, 1 = vcs, 2 = bcs, 3 = vecs;
*/
v2: Skip when from == to (Damien).
v3: avoid computing idx when from == to (Damien).
use ring == to instead of ring->id == to->id (Damien).
use continue instead of return (Rodrigo).
v4: avoid all unecessary computation (Damien).
reduce idx to loop scope (Damien).
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When using an IOMMU, GEM objects are mapped by their DMA address as the
physical address is unknown. This depends on the underlying IOMMU
driver to map and unmap the physical pages properly as defined in
intel_iommu.c.
The current code will tell the IOMMU to unmap the GEM BO's pages on the
destruction of the first VMA that "maps" that BO. This is clearly wrong
as there may be other VMAs "mapping" that BO (using flink). The scanout
is one such example.
The patch fixes this issue by only unmapping the DMA maps when there are
no more VMAs mapping that object. This is equivalent to when an object
is considered unbound as can be seen by the code. On the first VMA that
again because bound, we will remap.
An alternate solution would be to move the dma mapping to object
creation and destrubtion. I am not sure if this is considered an
unfriendly thing to do.
Some notes to backporters trying to backport full PPGTT:
The bug can never be hit without enabling the IOMMU. The existing code
will also do the right thing when the object is shared via dmabuf. The
failure should be demonstrable with flink. In cases when not using
intel_iommu_strict it is likely (likely, as defined by: off the top of
my head) on current workloads to *not* hit this bug since we often
teardown all VMAs for an object shared across multiple VMs. We also
finish access to that object before the first dma_unmapping.
intel_iommu_strict with flinked buffers is likely to hit this issue.
Signed-off-by: Armin Reese <armin.c.reese@intel.com>
[danvet: Add the excellent commit message provided by Ben.]
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we merged runtime PM support for DPMS, it is possible that these
assertions will be called when the power wells are disabled but a mode
is "set", resulting in "failed assertion" and "device suspended while
reading register" WARNs.
To reproduce the bug: disable all screens using mode unset, do a
modeset on one screen, disable it using DPMS, then try to do a mode
unset on it again to see the WARNs.
v2: The first version of this patch changed the assertions to also
check the power domains. Daniel suggested that it would be better to
just remove the assertions: "The modeset state checker
will already notice when we've failed to turn off the pipe. And we
check cursors and plane state in the enable sequence, too. Since we
use these asserts a lot to lock down the precise modeset sequence I
actually prefer if they're a bit dumb and don't check the power
wells."
Testcase: igt/rpm_rpm/dpms-mode-unset-lpsp
Testcase: igt/rpm_rpm/dpms-mode-unset-non-lpsp
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The comment [which was mine] is wrong. The context object can never be
bound in a PPGTT because it is only capable of living in the Global GTT.
So, remove the comment, and reorder the unref. What's nice about the
latter is it keeps the context object alive past the PPGTT. This makes
the destroy ordering symmetric with the creation ordering.
Create:
1. Create context
2. Create PPGTT
Destroy:
1. Destroy PPGTT
2. Destroy context
As far as I know, this does not fix a bug. The code previously kept the
context data structure, only the object was gone. As the code was,
nothing tried to use the object after this point.
NOTE: If in the future we have cases where the PPGTT can/should outlive
the context (which doesn't occur today, but the code permits it), this
ordering does not matter. Even if this occurs, as it stands now, we do
not expect that to be the normal case, and having this order makes
debugging a bit easier if we're tracking object lifetimes for the
context vs ppgtt
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Resolve conflict with Oscar's execlist prep patches.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The bound list is global (all objects which back the VMAs are stored
here). Recently the BUG() in the offset lookup was demoted to a WARN,
but the fault actually lies in the caller, here.
This bug has existed since the initial introduction of PPGTT (however,
it was fixed in unmerged patches to fix up the error state).
Note: The reason for the BUG_ON to WARN_ON demotion was _not_ to
duct-tape over this bug here but another but triggerable without
ppgtt. See the commit for details:
commit f25748ea73
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Jun 17 22:34:38 2014 +0200
drm/i915: Don't BUG_ON in i915_gem_obj_offset
A WARN_ON is perfectly fine.
The BUG in here seems to be the cause behind hard-hangs when I cat the
i915_gem_pageflip debugfs file (which calls this from an irq
spinlock). But only while running a full igt run after a while. I
still need to root cause the underlying issue.
I'll also start reject patches which add new BUG_ON but don't come
with a really good justification for it. The general rule really
should be to just WARN and hope the driver survives for long enough.
v2: Make the WARN a bit more useful per Chris' suggestion.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Clarfy that the WARN_ON (former BUG_ON) in ggtt_offset caught
more than just this bug fixed in this patch here.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was fumbled while trying to use the cached min/min/rpe values in
the vlv debugfs code.
This is a regression from
commit 03af20458a
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Sat Jun 28 02:03:53 2014 +0300
drm/i915: Use the cached min/min/rpe values in the vlv debugfs code
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>