Commit Graph

480699 Commits

Author SHA1 Message Date
Kuninori Morimoto caf18c27dd dma: rcar-audmapp: add DT support
This patch adds DT support to Audio DMAC peri peri driver.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms+renesas@verge.net.au: Do not add trailing blank line to rcar-audmapp.txt]
[horms+renesas@verge.net.au: squashed patch to add NULL terminater to audmapp_of_match]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-11 13:35:08 +02:00
Marcel Holtmann 6afd04ad6b Bluetooth: Add support for external configuration with UART driver
The quirk for enabling external configuration with UART needs to be
provided via the HCI UART flags. Add a new flag for it and declare
it as valid.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:59:50 +03:00
Marcel Holtmann bb72bd68fd Bluetooth: Check for valid HCI UART driver flags
Providing unknown or invalid flags to the HCI UART driver should
result in an error. So check which flags are valid and otherwise
return an error.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:59:47 +03:00
Marcel Holtmann 068d69e5bb Bluetooth: Move SCO timeout constants into net/bluetooth/sco.c
There is no external user of the SCO timeout constants and thus
move them into net/bluetooth/sco.c where they are actuallu used.

In addition just remove SCO_CONN_IDLE_TIMEOUT since it is unused.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:58:58 +03:00
Marcel Holtmann 6190ae7a18 Bluetooth: Remove unused SCO_DEFAULT_FLUSH_TO constant
The SCO_DEFAULT_FLUSH_TO constant has been defined, but it is not
used anywhere and so just remove it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:58:55 +03:00
Marcel Holtmann fc8f525a6f Bluetooth: Move struct sco_conn into net/bluetooth/sco.c
There exists no external user of struct sco_conn and thus move
it into the one place that is actually using it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:58:53 +03:00
Marcel Holtmann 2a0dccb3df Bluetooth: Move struct sco_pinfo into net/bluetooth/sco.c
There exists no external user of struct sco_pinfo and sco_pi and
thus move it into the one place that is actually using it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:58:50 +03:00
Marcel Holtmann a6801ca985 Bluetooth: Update the list of L2CAP fixed channels
The list of L2CAP fixed channels increased with newer versions of the
specification. This just updates the constants for it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:57:50 +03:00
Marcel Holtmann 899de76566 Bluetooth: Move HCI request internals to net/bluetooth/hci_core.c
The internals of the HCI request framework should not be leaking to
its users. Move them all into net/bluetooth/hci_core.c and provide
a simple hci_req_pending helper function for the one user outside
the framework.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:56:35 +03:00
Marcel Holtmann 863def58fe Bluetooth: Move struct hci_pinfo into net/bluetooth/hci_sock.c
There exists no external user of struct hci_pinfo and hci_pi and thus
move it into the one place that is actually using it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:55:14 +03:00
Marcel Holtmann 7e67c112a0 Bluetooth: Delcare the hci_sec_filter as const
The hci_sec_filter socket filter details do not change. They are fixed
and with that they can also be delcared as const.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:54:24 +03:00
Marcel Holtmann 3ad254f7f6 Bluetooth: Move struct hci_sec_filter next to its user
There is only single location using struct hci_sec_filter and with
that there is no point in putting this declaration into a global
header file. So move it right next to its user and make the code
a lot more simpler.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:54:17 +03:00
Marcel Holtmann f49daa8190 Bluetooth: Move HCI socket definitions into its own header file
All the HCI sockets and ioctl based definitions have been in a global
header file that also includes all the HCI protocol structures. To
make this a bit cleaner, move them into its own file.

This also adjusts fs/compat_ioctl.c to only include this new file
and not all the protocol structures that are not needed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11 13:53:04 +03:00
Charles Keepax 819b2dd1af mfd: arizona: Update DT binding to support MICVDD init_data
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-11 11:13:16 +01:00
Charles Keepax a6d97c12a6 mfd: arizona: Update DT binding to support LDO1 init_data
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-11 11:12:22 +01:00
Tero Kristo 0b6fbd68b2 ARM: OMAP4+: clock: remove DEFINE_CLK_OMAP_HSDIVIDER macro
This clock type declaration is no longer used as all omap4+ SoC clock
data has been moved to DT, thus remove it.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-07-11 03:51:16 -06:00
Wolfram Sang cb9a2b12e0 ARM: shmobile: r8a7790: lager: use iic cores instead of i2c
On Lager board, i2c and iic cores can be interchanged since they can be
muxed to the same wires. Commit e489c2a9bc
("ARM: shmobile: lager: enable i2c devices") activated the i2c cores,
yet the iic cores should be default since they have the more interesting
features for generic use cases, i.e. SMBUS_QUICK and DMA (yet to be
supported).

Reported-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-11 10:47:06 +02:00
Khiem Nguyen 5179ffd099 ARM: shmobile: Lager: Correct I2C bus for VDD MPU regulator
I2C bus for VDD MPU regulator is IIC3, not I2C3.

Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Reviewed-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-11 10:44:11 +02:00
Himangi Saraogi 0b9d22dc57 zorro: Use ARRAY_SIZE
ARRAY_SIZE is more concise to use when the size of an array is divided
by the size of its type or the size of its first element.

The Coccinelle semantic patch that makes this change is as follows:

// <smpl>
@@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
[Geert: Also convert the MANUF definition]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-07-11 10:38:02 +02:00
Geert Uytterhoeven 5bc8c7cdeb m68k: Export mach_random_get_entropy to modules
When a module calls random_get_entropy():

    ERROR: "mach_random_get_entropy" [crypto/drbg.ko] undefined!
    make[1]: *** [__modpost] Error 1

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-07-11 10:37:53 +02:00
Nadav Amit 68efa764f3 KVM: x86: Emulator support for #UD on CPL>0
Certain instructions (e.g., mwait and monitor) cause a #UD exception when they
are executed in user mode. This is in contrast to the regular privileged
instructions which cause #GP. In order not to mess with SVM interception of
mwait and monitor which assumes privilege level assertions take place before
interception, a flag has been added.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:05 +02:00
Nadav Amit 10e38fc7ca KVM: x86: Emulator flag for instruction that only support 16-bit addresses in real mode
Certain instructions, such as monitor and xsave do not support big real mode
and cause a #GP exception if any of the accessed bytes effective address are
not within [0, 0xffff].  This patch introduces a flag to mark these
instructions, including the necassary checks.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:04 +02:00
Paolo Bonzini 44583cba91 KVM: x86: use kvm_read_guest_page for emulator accesses
Emulator accesses are always done a page at a time, either by the emulator
itself (for fetches) or because we need to query the MMU for address
translations.  Speed up these accesses by using kvm_read_guest_page
and, in the case of fetches, by inlining kvm_read_guest_virt_helper and
dropping the loop around kvm_read_guest_page.

This final tweak saves 30-100 more clock cycles (4-10%), bringing the
count (as measured by kvm-unit-tests) down to 720-1100 clock cycles on
a Sandy Bridge Xeon host, compared to 2300-3200 before the whole series
and 925-1700 after the first two low-hanging fruit changes.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:04 +02:00
Paolo Bonzini 719d5a9b24 KVM: x86: ensure emulator fetches do not span multiple pages
When the CS base is not page-aligned, the linear address of the code could
get close to the page boundary (e.g. 0x...ffe) even if the EIP value is
not.  So we need to first linearize the address, and only then compute
the number of valid bytes that can be fetched.

This happens relatively often when executing real mode code.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:04 +02:00
Paolo Bonzini 17052f16a5 KVM: emulate: put pointers in the fetch_cache
This simplifies the code a bit, especially the overflow checks.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:03 +02:00
Paolo Bonzini 9506d57de3 KVM: emulate: avoid per-byte copying in instruction fetches
We do not need a memory copying loop anymore in insn_fetch; we
can use a byte-aligned pointer to access instruction fields directly
from the fetch_cache.  This eliminates 50-150 cycles (corresponding to
a 5-10% improvement in performance) from each instruction.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:03 +02:00
Paolo Bonzini 5cfc7e0f5e KVM: emulate: avoid repeated calls to do_insn_fetch_bytes
do_insn_fetch_bytes will only be called once in a given insn_fetch and
insn_fetch_arr, because in fact it will only be called at most twice
for any instruction and the first call is explicit in x86_decode_insn.
This observation lets us hoist the call out of the memory copying loop.
It does not buy performance, because most fetches are one byte long
anyway, but it prepares for the next patch.

The overflow check is tricky, but correct.  Because do_insn_fetch_bytes
has already been called once, we know that fc->end is at least 15.  So
it is okay to subtract the number of bytes we want to read.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:02 +02:00
Paolo Bonzini 285ca9e948 KVM: emulate: speed up do_insn_fetch
Hoist the common case up from do_insn_fetch_byte to do_insn_fetch,
and prime the fetch_cache in x86_decode_insn.  This helps a bit the
compiler and the branch predictor, but above all it lays the
ground for further changes in the next few patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:02 +02:00
Bandan Das 41061cdb98 KVM: emulate: do not initialize memopp
rip_relative is only set if decode_modrm runs, and if you have ModRM
you will also have a memopp.  We can then access memopp unconditionally.
Note that rip_relative cannot be hoisted up to decode_modrm, or you
break "mov $0, xyz(%rip)".

Also, move typecast on "out of range value" of mem.ea to decode_modrm.

Together, all these optimizations save about 50 cycles on each emulated
instructions (4-6%).

Signed-off-by: Bandan Das <bsd@redhat.com>
[Fix immediate operands with rip-relative addressing. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:01 +02:00
Bandan Das 573e80fe04 KVM: emulate: rework seg_override
x86_decode_insn already sets a default for seg_override,
so remove it from the zeroed area. Also replace set/get functions
with direct access to the field.

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:01 +02:00
Bandan Das c44b4c6ab8 KVM: emulate: clean up initializations in init_decode_cache
A lot of initializations are unnecessary as they get set to
appropriate values before actually being used. Optimize
placement of fields in x86_emulate_ctxt

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:00 +02:00
Bandan Das 02357bdc8c KVM: emulate: cleanup decode_modrm
Remove the if conditional - that will help us avoid
an "else initialize to 0" Also, rearrange operators
for slightly better code.

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:00 +02:00
Bandan Das 685bbf4ac4 KVM: emulate: Remove ctxt->intercept and ctxt->check_perm checks
The same information can be gleaned from ctxt->d and avoids having
to zero/NULL initialize intercept and check_perm

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:14:00 +02:00
Bandan Das 1498507a47 KVM: emulate: move init_decode_cache to emulate.c
Core emulator functions all belong in emulator.c,
x86 should have no knowledge of emulator internals

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:13:59 +02:00
Paolo Bonzini f5f87dfbc7 KVM: emulate: simplify writeback
The "if/return" checks are useless, because we return X86EMUL_CONTINUE
anyway if we do not return.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:13:59 +02:00
Paolo Bonzini 54cfdb3e95 KVM: emulate: speed up emulated moves
We can just blindly move all 16 bytes of ctxt->src's value to ctxt->dst.
write_register_operand will take care of writing only the lower bytes.

Avoiding a call to memcpy (the compiler optimizes it out) gains about
200 cycles on kvm-unit-tests for register-to-register moves, and makes
them about as fast as arithmetic instructions.

We could perhaps get a larger speedup by moving all instructions _except_
moves out of x86_emulate_insn, removing opcode_len, and replacing the
switch statement with an inlined em_mov.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:13:58 +02:00
Paolo Bonzini d40a6898e5 KVM: emulate: protect checks on ctxt->d by a common "if (unlikely())"
There are several checks for "peculiar" aspects of instructions in both
x86_decode_insn and x86_emulate_insn.  Group them together, and guard
them with a single "if" that lets the processor quickly skip them all.
Make this more effective by adding two more flag bits that say whether the
.intercept and .check_perm fields are valid.  We will reuse these
flags later to avoid initializing fields of the emulate_ctxt struct.

This skims about 30 cycles for each emulated instructions, which is
approximately a 3% improvement.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:13:58 +02:00
Paolo Bonzini e24186e097 KVM: emulate: move around some checks
The only purpose of this patch is to make the next patch simpler
to review.  No semantic change.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:13:57 +02:00
Paolo Bonzini 6addfc4299 KVM: x86: avoid useless set of KVM_REQ_EVENT after emulation
Despite the provisions to emulate up to 130 consecutive instructions, in
practice KVM will emulate just one before exiting handle_invalid_guest_state,
because x86_emulate_instruction always sets KVM_REQ_EVENT.

However, we only need to do this if an interrupt could be injected,
which happens a) if an interrupt shadow bit (STI or MOV SS) has gone
away; b) if the interrupt flag has just been set (other instructions
than STI can set it without enabling an interrupt shadow).

This cuts another 700-900 cycles from the cost of emulating an
instruction (measured on a Sandy Bridge Xeon: 1650-2600 cycles
before the patch on kvm-unit-tests, 925-1700 afterwards).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:13:57 +02:00
Paolo Bonzini 37ccdcbe07 KVM: x86: return all bits from get_interrupt_shadow
For the next patch we will need to know the full state of the
interrupt shadow; we will then set KVM_REQ_EVENT when one bit
is cleared.

However, right now get_interrupt_shadow only returns the one
corresponding to the emulated instruction, or an unconditional
0 if the emulated instruction does not have an interrupt shadow.
This is confusing and does not allow us to check for cleared
bits as mentioned above.

Clean the callback up, and modify toggle_interruptibility to
match the comment above the call.  As a small result, the
call to set_interrupt_shadow will be skipped in the common
case where int_shadow == 0 && mask == 0.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:13:56 +02:00
Paolo Bonzini 98eb2f8b14 KVM: vmx: speed up emulation of invalid guest state
About 25% of the time spent in emulation of invalid guest state
is wasted in checking whether emulation is required for the next
instruction.  However, this almost never changes except when a
segment register (or TR or LDTR) changes, or when there is a mode
transition (i.e. CR0 changes).

In fact, vmx_set_segment and vmx_set_cr0 already modify
vmx->emulation_required (except that the former for some reason
uses |= instead of just an assignment).  So there is no need to
call guest_state_valid in the emulation loop.

Emulation performance test results indicate 1650-2600 cycles
for common instructions, versus 2300-3200 before this patch on
a Sandy Bridge Xeon.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:13:56 +02:00
Matthias Lange 22d48b2d2a KVM: svm: writes to MSR_K7_HWCR generates GPE in guest
Since commit 575203 the MCE subsystem in the Linux kernel for AMD sets bit 18
in MSR_K7_HWCR. Running such a kernel as a guest in KVM on an AMD host results
in a GPE injected into the guest because kvm_set_msr_common returns 1. This
patch fixes this by masking bit 18 from the MSR value desired by the guest.

Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:11:59 +02:00
Nadav Amit 5f7552d4a5 KVM: x86: Pending interrupt may be delivered after INIT
We encountered a scenario in which after an INIT is delivered, a pending
interrupt is delivered, although it was sent before the INIT.  As the SDM
states in section 10.4.7.1, the ISR and the IRR should be cleared after INIT as
KVM does.  This also means that pending interrupts should be cleared.  This
patch clears upon reset (and INIT) the pending interrupts; and at the same
occassion clears the pending exceptions, since they may cause a similar issue.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:11:58 +02:00
Jim Mattson 80112c89ed KVM: Synthesize G bit for all segments.
We have noticed that qemu-kvm hangs early in the BIOS when runnning nested
under some versions of VMware ESXi.

The problem we believe is because KVM assumes that the platform preserves
the 'G' but for any segment register. The SVM specification itemizes the
segment attribute bits that are observed by the CPU, but the (G)ranularity bit
is not one of the bits itemized, for any segment. Though current AMD CPUs keep
track of the (G)ranularity bit for all segment registers other than CS, the
specification does not require it. VMware's virtual CPU may not track the
(G)ranularity bit for any segment register.

Since kvm already synthesizes the (G)ranularity bit for the CS segment. It
should do so for all segments. The patch below does that, and helps get rid of
the hangs. Patch applies on top of Linus' tree.

Signed-off-by: Jim Mattson <jmattson@vmware.com>
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-11 09:11:56 +02:00
Anton Blanchard c49f63530b powernv: Add OPAL tracepoints
Knowing how long we spend in firmware calls is an important part of
minimising OS jitter.

This patch adds tracepoints to each OPAL call. If tracepoints are
enabled we branch out to a common routine that calls an entry and exit
tracepoint.

This allows us to write tools that monitor the frequency and duration
of OPAL calls, eg:

name                  count  total(ms)  min(ms)  max(ms)  avg(ms)  period(ms)
OPAL_HANDLE_INTERRUPT     5      0.199    0.037    0.042    0.040   12547.545
OPAL_POLL_EVENTS        204      2.590    0.012    0.036    0.013    2264.899
OPAL_PCI_MSI_EOI       2830      3.066    0.001    0.005    0.001      81.166

We use jump labels if configured, which means we only add a single
nop instruction to every OPAL call when the tracepoints are disabled.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-11 16:06:08 +10:00
Anton Blanchard aaad422482 powerpc/pseries: Optimise hcall tracepoints
Now that we execute the hcall tracepoint entry and exit code out of
line, we can use the same stack across both functions.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-11 16:06:03 +10:00
Anton Blanchard cc1adb5f32 powerpc/pseries: Use jump labels for hcall tracepoints
hcall tracepoints add quite a few instructions to our hcall path:

plpar_hcall:
	mr      r2,r2
	mfcr    r0
	stw     r0,8(r1)
	b       164		<---- start
	ld      r12,0(r2)
	std     r12,32(r1)
	cmpdi   r12,0
	beq     164		<---- end
...

We have an unconditional branch that gets noped out during boot and
a load/compare/branch. We also store the tracepoint value to the
stack for the hcall_exit path to use.

By using jump labels we can simplify this to just a single nop that
gets replaced with a branch when the tracepoint is enabled:

plpar_hcall:
	mr      r2,r2
	mfcr    r0
	stw     r0,8(r1)
	nop			<----
...

If jump labels are not enabled, we fall back to the old method.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-11 16:05:58 +10:00
Alexey Kardashevskiy 8fa5d4547e powerpc/powernv: Add a page size parameter to pnv_pci_setup_iommu_table()
Since a TCE page size can be other than 4K, make it configurable for
P5IOC2 and IODA PHBs.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-11 16:05:53 +10:00
Alexey Kardashevskiy bc32057ed5 powerpc/powernv: Use it_page_shift in TCE build
This makes use of iommu_table::it_page_shift instead of TCE_SHIFT and
TCE_RPN_SHIFT hardcoded values.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-11 16:05:48 +10:00
Alexey Kardashevskiy b0376c9b08 powerpc/powernv: Use it_page_shift for TCE invalidation
This fixes IODA1/2 to use it_page_shift as it may be bigger than 4K.

This changes involved constant values to use "ull" modifier.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-11 16:05:43 +10:00