Commit Graph

480699 Commits

Author SHA1 Message Date
Lars Ellenberg a5655dac75 drbd: fix bogus resync stats in /proc/drbd
We intentionally do not serialize /proc/drbd access with
internal state changes or statistic updates.

Because of that, cat /proc/drbd  may race with resync just being
finished, still see the sync state, and find information about
number of blocks still to go, but then find the total number
of blocks within this resync has just been reset to 0
when accessing it.

This now produces bogus numbers in the resync speed estimates.

Fix by accessing all relevant data only once,
and fixing it up if "still to go" happens to be more than "total".

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:59 +02:00
Andreas Gruenbacher caa3db0e14 drbd: Remove unnecessary/unused code
Get rid of dump_stack() debug statements.

There is no point whatsoever in registering and unregistering a reboot
notifier that doesn't do anything.

The intention was to switch to an "emergency read-only" mode,
so we won't have to resync the full activity log just because
we had been Primary before the reboot.

Once we have that implemented, we may re-introduce the reboot notifier.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:58 +02:00
Mohammed Habibulla 0e1e5e590a platform/chrome: chromeos_laptop - Add Dell Chromebook 11 touch
Add support for Dell Chromebook 11's touch device, which is the same
as falco/peppy on the same bus using the LynxPoint-LP I2C via the
i2c-designware-pci driver.

Based on these patches from the chromeos-3.8 kernel:
https://chromium-review.googlesource.com/#/c/65320/
https://chromium-review.googlesource.com/#/c/174664/

Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-10 09:34:57 -07:00
Lars Ellenberg 8ce953aa39 drbd: silence -Wmissing-prototypes warnings
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:57 +02:00
Lars Ellenberg 3e0c78d346 drbd: drop wrong debugging aid
The textual representation of resync extents in /proc/drbd presented
with proc_details >= 3 was wrong, it used bitnumbers as bitmasks.

It was not particularly useful either, and I doubt anyone has even tried
to look at it in the last few years. Drop it.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:57 +02:00
Lars Ellenberg 4dd726f029 drbd: get rid of drbd_queue_work_front
The last user was al_write_transaction, if called with "delegate",
and the last user to call it with "delegate = true" was the receiver
thread, which has no need to delegate, but can call it himself.

Finally drop the delegate parameter, drop the extra
w_al_write_transaction callback, and drop drbd_queue_work_front.

Do not (yet) change dequeue_work_item to dequeue_work_batch, though.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:56 +02:00
Lars Ellenberg ac0acb9e39 drbd: use drbd_device_post_work() in more places
This replaces the md_sync_work member of struct drbd_device
by a new MD_SYNC "work bit" in device->flags.

This replaces the resync_start_work member of struct drbd_device
by a new RS_START "work bit" in device->flags.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:55 +02:00
Lars Ellenberg e334f55095 drbd: make sure disk cleanup happens in worker context
The recent fix to put_ldev() (correct ordering of access to local_cnt
and state.disk; memory barrier in __drbd_set_state) guarantees
that the cleanup happens exactly once.

However it does not yet guarantee that the cleanup happens from worker
context, the last put_ldev() may still happen from atomic context,
which must not happen: blkdev_put() may sleep.

Fix this by scheduling the cleanup to the worker instead,
using a couple more bits in device->flags and a new helper,
drbd_device_post_work().

Generalized the "resync progress" work to cover these new work bits.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:55 +02:00
Benson Leung 5ea9567f61 platform/chrome: chromeos_laptop - Add HP Chromebook 14
Add support for the trackpad on HP Chromebook 14.

Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-10 09:34:54 -07:00
Lars Ellenberg ba3c6fb87d drbd: close race when detaching from disk
BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
IP: bd_release+0x21/0x70
Process drbd_w_t7146
Call Trace:
 close_bdev_exclusive
 drbd_free_ldev		[drbd]
 drbd_ldev_destroy	[drbd]
 w_after_state_ch	[drbd]

Race probably went like this:
  state.disk = D_FAILED

... first one to hit zero during D_FAILED:
   put_ldev() /* ----------------> 0 */
     i = atomic_dec_return()
     if (i == 0)
       if (state.disk == D_FAILED)
         schedule_work(go_diskless)
                                /* 1 <------ */ get_ldev_if_state()
   go_diskless()
      do_some_pre_cleanup()                     corresponding put_ldev():
      force_state(D_DISKLESS)   /* 0 <------ */ i = atomic_dec_return()
                                                if (i == 0)
        atomic_inc() /* ---------> 1 */
        state.disk = D_DISKLESS
        schedule_work(after_state_ch)           /* execution pre-empted by IRQ ? */

   after_state_ch()
     put_ldev()
       i = atomic_dec_return()  /* 0 */
       if (i == 0)
         if (state.disk == D_DISKLESS)            if (state.disk == D_DISKLESS)
           drbd_ldev_destroy()                      drbd_ldev_destroy();

Trying to fix this by checking the disk state *before* the
atomic_dec_return(), which implies memory barriers, and by inserting
extra memory barriers around the state assignment in __drbd_set_state().

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:54 +02:00
Lars Ellenberg 2ed912e9d3 drbd: explicitly submit meta data requests with REQ_NOIDLE
For some reason we have assumed NOIDLE was implied
by one of the other flags we set. It is not (anymore?).
Explicitly set REQ_NOIDLE for synchronous meta data updates,
or we can seriously starve random writes when using CFQ.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:54 +02:00
Lars Ellenberg 720979fb90 drbd: move set_disk_ro() to after we persisted the new role
This probably does not have any real life impact,
but we should first persist any potentially new UUID
and other meta data flags, as well as our new role,
before we allow/disallow write access.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:53 +02:00
Lars Ellenberg 123ff122ad drbd: trigger tcp_push_pending_frames() for PING and PING_ACK
This should reduce latency for such in-DRBD-protocol "pings",
and may help reduce spurious disconnect/reconnect cycles due to
 "PingAck did not arrive in time."

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:52 +02:00
Lars Ellenberg 66ce6dbce2 drbd: re-add lost conf_mutex protection in drbd_set_role
The conf_update mutex used to be held while clearing the
net_conf->discard_my_data flag inside drbd_set_role.

It was moved into drbd_adm_set_role with
    drbd: allow parallel promote/demote actions
but then replaced at that location by the newly introduced adm_mutex with
    drbd: Fix a potential deadlock in drbdsetup, introduce resource->adm_mutex

And I simply forgot to put it back in at the original location.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:52 +02:00
Lars Ellenberg fcb096740a drbd: stop the meta data sync timer before open coded meta data sync
If we re-write all meta data due to resize, we have open-coded write-out
of our meta data super block. Stop the md_sync_timer, it would just
trigger scary but in this case spurious "timer expired" messages.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:51 +02:00
Lars Ellenberg 5ab7d2c005 drbd: fix resync finished detection
This fixes one recent regresion,
and one long existing bug.

The bug:
drbd_try_clear_on_disk_bm() assumed that all "count" bits have to be
accounted in the resync extent corresponding to the start sector.

Since we allow application requests to cross our "extent" boundaries,
this assumption is no longer true, resulting in possible misaccounting,
scary messages
("BAD! sector=12345s enr=6 rs_left=-7 rs_failed=0 count=58 cstate=..."),
and potentially, if the last bit to be cleared during resync would
reside in previously misaccounted resync extent, the resync would never
be recognized as finished, but would be "stalled" forever, even though
all blocks are in sync again and all bits have been cleared...

The regression was introduced by
    drbd: get rid of atomic update on disk bitmap works

For an "empty" resync (rs_total == 0), we must not "finish" the
resync on the SyncSource before the SyncTarget knows all relevant
information (sync uuid).  We need to wait for the full round-trip,
the SyncTarget will then explicitly notify us.

Also for normal, non-empty resyncs (rs_total > 0), the resync-finished
condition needs to be tested before the schedule() in wait_for_work, or
it is likely to be missed.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:50 +02:00
Lars Ellenberg a80ca1ae81 drbd: fix a race stopping the worker thread
We may implicitly call drbd_send() from inside wait_for_work(),
via maybe_send_barrier().

If the "stop" signal was send just before that, drbd_send() would call
flush_signals(), and we would run an unbounded schedule() afterwards.

Fix: check for thread_state == RUNNING before we schedule()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:50 +02:00
Lars Ellenberg c7a58db4e9 drbd: get rid of atomic update on disk bitmap works
Just trigger the occasional lazy bitmap write-out during resync
from the central wait_for_work() helper.

Previously, during resync, bitmap pages would be written out separately,
synchronously, one at a time, at least 8 times each (every 512 bytes
worth of bitmap cleared).

Now we trigger "merge friendly" bulk write out of all cleared pages
every two seconds during resync, and once the resync is finished.
Most pages will be written out only once.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:49 +02:00
Mika Westerberg da3b0ab75a platform/chrome: chromeos_laptop - Add support for Acer C720
Acer C720 has touchpad and light sensor connected to a separate I2C buses.
Since the designware I2C host controller driver has two instances on this
particular machine we need a way to match the correct instance. Add support
for this and then register both C720 touchpad and light sensor.

This code is based on following patch from Benson Leung:

https://patchwork.kernel.org/patch/3074411/

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-10 09:34:48 -07:00
Takashi Iwai 5646eda585 ALSA: pcm: Add timestamp type to sw_params
For allowing adjusting the timestamp type on the fly, add it to
sw_params.  The existing ioctl is still kept for compatibility.

Along with this, increment the PCM protocol version.

The extension was suggested by Clemens Ladisch.

Acked-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-10 16:58:15 +02:00
Mark Brown 0ac8a52d45 ALSA: Provide a CLOCK_MONOTONIC_RAW timestamp type
For applications which need to synchronise with external timebases such
as broadcast TV applications the kernel monotonic time is not optimal as
it includes adjustments from NTP and so may still include discontinuities
due to that. A raw monotonic time which does not include any adjustments
is available in the kernel from getrawmonotonic() so provide userspace with
a new timestamp type SNDRV_PCM_TSTAMP_TYPE_MONOTONIC_RAW which provides
timestamps based on this as an option.

[dropped tstamp_type assignment code, as it's no longer needed -- tiwai]

Reported-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-10 16:58:13 +02:00
Takashi Iwai 2408c219df ALSA: pcm: simplify snd_pcm_tstamp()
No functional change.

Acked-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-10 16:58:01 +02:00
Paul Moore 4da6daf4d3 selinux: fix the default socket labeling in sock_graft()
The sock_graft() hook has special handling for AF_INET, AF_INET, and
AF_UNIX sockets as those address families have special hooks which
label the sock before it is attached its associated socket.
Unfortunately, the sock_graft() hook was missing a default approach
to labeling sockets which meant that any other address family which
made use of connections or the accept() syscall would find the
returned socket to be in an "unlabeled" state.  This was recently
demonstrated by the kcrypto/AF_ALG subsystem and the newly released
cryptsetup package (cryptsetup v1.6.5 and later).

This patch preserves the special handling in selinux_sock_graft(),
but adds a default behavior - setting the sock's label equal to the
associated socket - which resolves the problem with AF_ALG and
presumably any other address family which makes use of accept().

Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
2014-07-10 10:17:48 -04:00
Jim Baxter 66847062a6 usb: gadget: NCM: Stop RX TCP Bursts getting dropped.
This fixes a problem with dropped packets over 16k CDC-NCM
when the connection is being heavily used.

The issue was that the extracted frames cloned from the
received frame were consuming more memory than necessary
resulting in the truesize being ~32KB instead of ~2KB, this
meant there was a high chance of reaching the sk_rcvbuf
limit.

Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:49:39 -05:00
Jim Baxter 6d3865f9d4 usb: gadget: NCM: Add transmit multi-frame.
This adds multi-frame support to the NCM NTB's for
the gadget driver. This allows multiple network
packets to be put inside a single USB NTB with a
maximum size of 16kB.

It has a time out of 300ms to ensure that smaller
number of packets still maintain a normal latency.

Also the .fp_index and .next_fp_index have been
changed to .ndp_index and .next_ndp_index to
match the latest CDC-NCM specification and
help with maintenance.

Results transmitting from gadget to host.

Before the change:

TCP_STREAM Throughput (10^6bits/sec): 22.72
UDP_STREAM Throughput (10^6bits/sec): 25.94

Latency:
netperf -H 192.168.1.101 -v2 -l 50 -t TCP_RR -- -r 16384,16384
Trans.   RoundTrip  Throughput
Rate     Latency    10^6bits/s
per sec  usec/Tran  Outbound

100.83   9918.116   13.215

After the change:

TCP_STREAM Throughput (10^6bits/sec): 124.26
UDP_STREAM Throughput (10^6bits/sec): 227.48

Latency:
netperf -H 192.168.1.101 -v2 -l 50 -t TCP_RR -- -r 16384,16384
Trans.   RoundTrip  Throughput
Rate     Latency    10^6bits/s
per sec  usec/Tran  Outbound

156.80   6377.730   20.552

Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:49:38 -05:00
Jim Baxter 370af734df usb: gadget: NCM: RX function support multiple NDPs
The NDP was ignoring the wNextNdpIndex in the NDP which
means that NTBs containing multiple NDPs would have missed
frames.

Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:49:35 -05:00
Nathan Sullivan d82aa8aeb0 usb: gadget: fix eem_wrap cloned skb logic
Even if the skb is cloned, we still need a ZLP or USB will stall.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Acked-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:45:32 -05:00
Jingoo Han 029d97ff54 usb: dwc3: gadget: remove unnecessary 'start_new' variable
Remove 'start_new' variable from dwc3_endpoint_transfer_complete(),
since this variable has not been used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:44:25 -05:00
Jingoo Han 1e32cda86d usb: phy: am335x: Use SIMPLE_DEV_PM_OPS macro
Use SIMPLE_DEV_PM_OPS macro and remove DEV_PM_OPS macro, in order
to make the code simpler.

Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:39:20 -05:00
Marcel Holtmann 12aa4f0a3d Bluetooth: Set HCI_PAIRABLE during power on for legacy ioctl
When the controller is brought up using legacy ioctl, the setting of
the HCI_PAIRABLE flag should happen then. Previously it was set during
enumeration and when retrieving device information.

This change also will not set the HCI_PAIRABLE flag when the controller
is used with the HCI User Channel operation.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-10 16:37:18 +03:00
Tobias Klauser 909346a819 usb: gadget: Convert drivers to use module_usb_composite_driver()
Use the module_usb_composite_driver() macro where applicable to
eliminate the module_init/module_exit boilerplate in USB gadget composite
drivers.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:37:09 -05:00
Joerg Roedel d9e1611e73 iommu/amd: Don't call the inv_ctx_cb when pasid is not set up
On the error path of amd_iommu_bind_pasid() we call
mmu_notifier_unregister() for cleanup. This calls
mn_release() which calls the users inv_ctx_cb function if
one is available. Since the pasid is not set up yet there is
nothing the user can to tear down in this call-back. So
don't call inv_ctx_cb on the error path of
amd_iommu_unbind_pasid() and make life of the users simpler.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
2014-07-10 15:37:03 +02:00
Joerg Roedel dba3838d7a iommu/amd: Don't hold a reference to task_struct
Since we are only caring about the lifetime of the mm_struct
and not the task we can't safely keep a reference to it. The
reference is also not needed anymore, so remove that code
entirely.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
2014-07-10 15:36:58 +02:00
Tobias Klauser 7ec3ea181d usb: gadget: Add helper macro for usb_composite_driver boilerplate
Introduce the module_usb_composite_driver macro as a convenience macro
for USB gadget composite driver modules, similar to module_usb_driver.
It is intended to be used by drivers which init/exit section does
nothing but calling usb_composite_probe/usb_composite_unrregister. By
using this macro it is possible to eliminate a few lines of boilerplate
code per USB gadget composite driver.

Based on f3a6a4b6 ("USB: Add helper macro for usb_driver boilerplate")
which introduced the according macro for USB drivers.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:52 -05:00
Joerg Roedel f0aac63b87 iommu/amd: Don't hold a reference to mm_struct
With mmu_notifiers we don't need to hold a reference to the
mm_struct during the time the pasid is bound to a device. We
can rely on the .mn_release call back to inform us when the
mm_struct goes away.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
2014-07-10 15:36:52 +02:00
Andrzej Pietrasiewicz f0175ab519 usb: gadget: f_fs: OS descriptors support
Add support for OS descriptors. The new format of descriptors is used,
because the "flags" field is required for extensions. os_count gives
the number of OSDesc[] elements.
The format of descriptors is given in include/uapi/linux/usb/functionfs.h.

For extended properties descriptor the usb_ext_prop_desc structure covers
only a part of a descriptor, because the wPropertyNameLength is unknown
up front.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:52 -05:00
Andrzej Pietrasiewicz 7ea4f088c8 usb: gadget: u_os_desc: helper functions for accessing ext prop buffer
Provide helper functions to get pointers to particular locations within
a buffer holding an extended properties descriptor.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:51 -05:00
Andrzej Pietrasiewicz f96cbd149a usb: gadget: f_fs: rename descriptor parsing functions
ffs_do_desc() handles one descriptor, while ffs_do_descs() handles a number
of descriptors. The tho names are so similar that it causes confusion.
Rename to reflect their purpose better.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:51 -05:00
Thierry Reding e18366da2f usb: phy: tegra: Do not include asm/mach-types.h
It is no longer needed and keeping it will break 64-bit ARM builds.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:51 -05:00
Apelete Seketeli 3d75bd3d0a usb: musb: register nop transceiver driver for jz4740
Following the name change of the NOP transceiver driver in commit
4525bee (usb: phy: rename usb_nop_xceiv to usb_phy_generic), the
transceiver driver was no longer operable under its old name.

Register the transceiver driver before calling usb_get_phy() to make
sure we are noticed by an error message if it is not available.

Signed-off-by: Apelete Seketeli <apelete@seketeli.net>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:50 -05:00
Ricardo Ribalda Delgado b99b406c99 usb: gadget: net2280: Fix typo on #ifdef
Commit e56e69cc0f ("usb: gadget: net2280: Use pr_* function")
includes a editing mistake on one of the #ifdef.

This patch fixes it.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:50 -05:00
Arnd Bergmann 56e5cea904 usb: gadget: pxa25x_udc: use correct header for gpio devm_ functions
commit c63d2225e7 ("usb: gadget: pxa25x_udc: use devm_ functions")
introduced the use of devm_gpio_request in this driver, but did not
correctly include the header file declaring this function, which
causes a build failure.

This changes pxa25x_udc to include linux/gpio.h instead of asm/gpio.h
to fix this.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Himangi Saraogi <himangi774@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:50 -05:00
Yoshihiro Shimoda dfb87b8bfe usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting
This patch fixes an issue that the renesas_usbhs driver in gadget mode
cannot work correctly even if I disabled DMAC of the driver when I used
the g_zero driver and the testusb tool.

When a usb cable is re-connected, the renesas_usbhs driver calls the
usbhsp_flags_init() (via usbhs_hotplug() --> usbhs_mod_call(start) -->
usbhsg_try_start() --> usbhs_pipe_init()). However, the driver doesn't
call the usbhsp_flags_init() when usbhsg_ep_disable() is called.
So, if a gadget driver calls usb_ep_enable() and usb_ep_disable() again
and again, the renesas_usbhs driver will output the following log:

  renesas_usbhs renesas_usbhs: can't get pipe (BULK)
  renesas_usbhs renesas_usbhs: wrong recip request

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:49 -05:00
Yoshihiro Shimoda 6a0541599f usb: renesas_usbhs: fix usbhs_pipe_malloc() to re-enable a pipe.
This patch fixes an issue that the driver cannot push a new data when
a pipe is re-enabled after the pipe is queued.

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:36:49 -05:00
Joerg Roedel 53d340ef4a iommu/amd: Add pasid_state->invalid flag
This is used to signal the ppr_notifer function that no more
faults should be processes on this pasid_state. This way we
can keep the pasid_state safely in the state-table so that
it can be freed in the amd_iommu_unbind_pasid() function.

This allows us to not hold a reference to the mm_struct
during the whole pasid-binding-time.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
2014-07-10 15:36:46 +02:00
Joerg Roedel dc88db7ee9 iommu/amd: Drop pasid_state reference in ppr_notifer error path
In case we are not able to allocate a fault structure a
reference to the pasid_state will be leaked. Fix that by
dropping the reference in the error path in case we hold
one.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
2014-07-10 15:36:40 +02:00
Joerg Roedel 61feb43897 iommu/amd: Get rid of __unbind_pasid
Unbind_pasid is only called from mn_release which already
has the pasid_state. Use this to simplify the unbind_pasid
path and get rid of __unbind_pasid.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
2014-07-10 15:36:34 +02:00
Joerg Roedel c5db16ad6c iommu/amd: Don't free pasid_state in mn_release path
The mmu_notifier state is part of pasid_state so it can't be
freed in the mn_release path. Free the pasid_state after
mmu_notifer_unregister has completed.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
2014-07-10 15:36:27 +02:00
Joerg Roedel caf8a518d7 iommu/amd: Don't call mmu_notifer_unregister in __unbind_pasid
This function is called only in the mn_release() path, so
there is no need to unregister the mmu_notifer here.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
2014-07-10 15:36:22 +02:00
Joerg Roedel ff6d0cce38 iommu/amd: Fix typo in amd_iommu_v2 driver
Fix typo in a comment.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-07-10 15:36:17 +02:00