From 27ffe84e79d2e025c9bf6ccd1637f352e49a151b Mon Sep 17 00:00:00 2001 From: PX4BuildBot Date: Thu, 6 Jan 2022 22:09:58 +0000 Subject: [PATCH] autogenerated headers for rev https://github.com/mavlink/mavlink/tree/27395aa7a517579edbddee2952f1daf588cfb928 --- ASLUAV/mavlink_msg_asl_obctrl.h | 2 +- ASLUAV/mavlink_msg_aslctrl_data.h | 2 +- ASLUAV/mavlink_msg_aslctrl_debug.h | 2 +- ASLUAV/mavlink_msg_asluav_status.h | 2 +- ASLUAV/mavlink_msg_command_int_stamped.h | 2 +- ASLUAV/mavlink_msg_command_long_stamped.h | 2 +- ASLUAV/mavlink_msg_ekf_ext.h | 2 +- ASLUAV/mavlink_msg_fw_soaring_data.h | 2 +- ASLUAV/mavlink_msg_gsm_link_status.h | 2 +- ASLUAV/mavlink_msg_satcom_link_status.h | 2 +- ASLUAV/mavlink_msg_sens_atmos.h | 2 +- ASLUAV/mavlink_msg_sens_batmon.h | 2 +- ASLUAV/mavlink_msg_sens_mppt.h | 2 +- ASLUAV/mavlink_msg_sens_power.h | 2 +- ASLUAV/mavlink_msg_sens_power_board.h | 2 +- ASLUAV/mavlink_msg_sensor_airflow_angles.h | 2 +- ASLUAV/mavlink_msg_sensorpod_status.h | 2 +- ardupilotmega/mavlink_msg_adap_tuning.h | 2 +- ardupilotmega/mavlink_msg_ahrs.h | 2 +- ardupilotmega/mavlink_msg_ahrs2.h | 2 +- ardupilotmega/mavlink_msg_ahrs3.h | 2 +- ardupilotmega/mavlink_msg_airspeed_autocal.h | 2 +- ardupilotmega/mavlink_msg_aoa_ssa.h | 2 +- ardupilotmega/mavlink_msg_ap_adc.h | 2 +- ardupilotmega/mavlink_msg_autopilot_version_request.h | 2 +- ardupilotmega/mavlink_msg_battery2.h | 2 +- ardupilotmega/mavlink_msg_camera_feedback.h | 2 +- ardupilotmega/mavlink_msg_camera_status.h | 2 +- ardupilotmega/mavlink_msg_compassmot_status.h | 2 +- ardupilotmega/mavlink_msg_data16.h | 2 +- ardupilotmega/mavlink_msg_data32.h | 2 +- ardupilotmega/mavlink_msg_data64.h | 2 +- ardupilotmega/mavlink_msg_data96.h | 2 +- ardupilotmega/mavlink_msg_deepstall.h | 2 +- ardupilotmega/mavlink_msg_device_op_read.h | 2 +- ardupilotmega/mavlink_msg_device_op_read_reply.h | 2 +- ardupilotmega/mavlink_msg_device_op_write.h | 2 +- ardupilotmega/mavlink_msg_device_op_write_reply.h | 2 +- ardupilotmega/mavlink_msg_digicam_configure.h | 2 +- ardupilotmega/mavlink_msg_digicam_control.h | 2 +- ardupilotmega/mavlink_msg_ekf_status_report.h | 2 +- ardupilotmega/mavlink_msg_esc_telemetry_1_to_4.h | 2 +- ardupilotmega/mavlink_msg_esc_telemetry_5_to_8.h | 2 +- ardupilotmega/mavlink_msg_esc_telemetry_9_to_12.h | 2 +- ardupilotmega/mavlink_msg_fence_fetch_point.h | 2 +- ardupilotmega/mavlink_msg_fence_point.h | 2 +- ardupilotmega/mavlink_msg_gimbal_control.h | 2 +- ardupilotmega/mavlink_msg_gimbal_report.h | 2 +- ardupilotmega/mavlink_msg_gimbal_torque_cmd_report.h | 2 +- ardupilotmega/mavlink_msg_gopro_get_request.h | 2 +- ardupilotmega/mavlink_msg_gopro_get_response.h | 2 +- ardupilotmega/mavlink_msg_gopro_heartbeat.h | 2 +- ardupilotmega/mavlink_msg_gopro_set_request.h | 2 +- ardupilotmega/mavlink_msg_gopro_set_response.h | 2 +- ardupilotmega/mavlink_msg_hwstatus.h | 2 +- ardupilotmega/mavlink_msg_led_control.h | 2 +- ardupilotmega/mavlink_msg_limits_status.h | 2 +- ardupilotmega/mavlink_msg_mag_cal_progress.h | 2 +- ardupilotmega/mavlink_msg_mcu_status.h | 2 +- ardupilotmega/mavlink_msg_meminfo.h | 2 +- ardupilotmega/mavlink_msg_mount_configure.h | 2 +- ardupilotmega/mavlink_msg_mount_control.h | 2 +- ardupilotmega/mavlink_msg_mount_status.h | 2 +- ardupilotmega/mavlink_msg_obstacle_distance_3d.h | 2 +- ardupilotmega/mavlink_msg_osd_param_config.h | 2 +- ardupilotmega/mavlink_msg_osd_param_config_reply.h | 2 +- ardupilotmega/mavlink_msg_osd_param_show_config.h | 2 +- ardupilotmega/mavlink_msg_osd_param_show_config_reply.h | 2 +- ardupilotmega/mavlink_msg_pid_tuning.h | 2 +- ardupilotmega/mavlink_msg_radio.h | 2 +- ardupilotmega/mavlink_msg_rally_fetch_point.h | 2 +- ardupilotmega/mavlink_msg_rally_point.h | 2 +- ardupilotmega/mavlink_msg_rangefinder.h | 2 +- ardupilotmega/mavlink_msg_remote_log_block_status.h | 2 +- ardupilotmega/mavlink_msg_remote_log_data_block.h | 2 +- ardupilotmega/mavlink_msg_rpm.h | 2 +- ardupilotmega/mavlink_msg_sensor_offsets.h | 2 +- ardupilotmega/mavlink_msg_set_mag_offsets.h | 2 +- ardupilotmega/mavlink_msg_simstate.h | 2 +- ardupilotmega/mavlink_msg_vision_position_delta.h | 2 +- ardupilotmega/mavlink_msg_water_depth.h | 2 +- ardupilotmega/mavlink_msg_wind.h | 2 +- checksum.h | 2 +- common/mavlink_msg_actuator_control_target.h | 2 +- common/mavlink_msg_actuator_output_status.h | 2 +- common/mavlink_msg_adsb_vehicle.h | 2 +- common/mavlink_msg_ais_vessel.h | 2 +- common/mavlink_msg_altitude.h | 2 +- common/mavlink_msg_att_pos_mocap.h | 2 +- common/mavlink_msg_attitude.h | 2 +- common/mavlink_msg_attitude_quaternion.h | 2 +- common/mavlink_msg_attitude_quaternion_cov.h | 2 +- common/mavlink_msg_attitude_target.h | 2 +- common/mavlink_msg_auth_key.h | 2 +- common/mavlink_msg_autopilot_state_for_gimbal_device.h | 2 +- common/mavlink_msg_autopilot_version.h | 2 +- common/mavlink_msg_battery_status.h | 2 +- common/mavlink_msg_button_change.h | 2 +- common/mavlink_msg_camera_capture_status.h | 2 +- common/mavlink_msg_camera_fov_status.h | 2 +- common/mavlink_msg_camera_image_captured.h | 2 +- common/mavlink_msg_camera_information.h | 2 +- common/mavlink_msg_camera_settings.h | 2 +- common/mavlink_msg_camera_tracking_geo_status.h | 2 +- common/mavlink_msg_camera_tracking_image_status.h | 2 +- common/mavlink_msg_camera_trigger.h | 2 +- common/mavlink_msg_cellular_config.h | 2 +- common/mavlink_msg_cellular_status.h | 2 +- common/mavlink_msg_change_operator_control.h | 2 +- common/mavlink_msg_change_operator_control_ack.h | 2 +- common/mavlink_msg_collision.h | 2 +- common/mavlink_msg_command_ack.h | 2 +- common/mavlink_msg_command_cancel.h | 2 +- common/mavlink_msg_command_int.h | 2 +- common/mavlink_msg_command_long.h | 2 +- common/mavlink_msg_component_information.h | 2 +- common/mavlink_msg_control_system_state.h | 2 +- common/mavlink_msg_current_event_sequence.h | 2 +- common/mavlink_msg_data_stream.h | 2 +- common/mavlink_msg_data_transmission_handshake.h | 2 +- common/mavlink_msg_debug.h | 2 +- common/mavlink_msg_debug_float_array.h | 2 +- common/mavlink_msg_debug_vect.h | 2 +- common/mavlink_msg_distance_sensor.h | 2 +- common/mavlink_msg_efi_status.h | 2 +- common/mavlink_msg_encapsulated_data.h | 2 +- common/mavlink_msg_esc_info.h | 2 +- common/mavlink_msg_esc_status.h | 2 +- common/mavlink_msg_estimator_status.h | 2 +- common/mavlink_msg_event.h | 2 +- common/mavlink_msg_extended_sys_state.h | 2 +- common/mavlink_msg_fence_status.h | 2 +- common/mavlink_msg_file_transfer_protocol.h | 2 +- common/mavlink_msg_flight_information.h | 2 +- common/mavlink_msg_follow_target.h | 2 +- common/mavlink_msg_generator_status.h | 2 +- common/mavlink_msg_gimbal_device_attitude_status.h | 2 +- common/mavlink_msg_gimbal_device_information.h | 2 +- common/mavlink_msg_gimbal_device_set_attitude.h | 2 +- common/mavlink_msg_gimbal_manager_information.h | 2 +- common/mavlink_msg_gimbal_manager_set_attitude.h | 2 +- common/mavlink_msg_gimbal_manager_set_manual_control.h | 2 +- common/mavlink_msg_gimbal_manager_set_pitchyaw.h | 2 +- common/mavlink_msg_gimbal_manager_status.h | 2 +- common/mavlink_msg_global_position_int.h | 2 +- common/mavlink_msg_global_position_int_cov.h | 2 +- common/mavlink_msg_global_vision_position_estimate.h | 2 +- common/mavlink_msg_gps2_raw.h | 2 +- common/mavlink_msg_gps2_rtk.h | 2 +- common/mavlink_msg_gps_global_origin.h | 2 +- common/mavlink_msg_gps_inject_data.h | 2 +- common/mavlink_msg_gps_input.h | 2 +- common/mavlink_msg_gps_raw_int.h | 2 +- common/mavlink_msg_gps_rtcm_data.h | 2 +- common/mavlink_msg_gps_rtk.h | 2 +- common/mavlink_msg_gps_status.h | 2 +- common/mavlink_msg_high_latency.h | 2 +- common/mavlink_msg_high_latency2.h | 2 +- common/mavlink_msg_highres_imu.h | 2 +- common/mavlink_msg_hil_actuator_controls.h | 2 +- common/mavlink_msg_hil_controls.h | 2 +- common/mavlink_msg_hil_gps.h | 2 +- common/mavlink_msg_hil_optical_flow.h | 2 +- common/mavlink_msg_hil_rc_inputs_raw.h | 2 +- common/mavlink_msg_hil_sensor.h | 2 +- common/mavlink_msg_hil_state.h | 2 +- common/mavlink_msg_hil_state_quaternion.h | 2 +- common/mavlink_msg_home_position.h | 2 +- common/mavlink_msg_hygrometer_sensor.h | 2 +- common/mavlink_msg_isbd_link_status.h | 2 +- common/mavlink_msg_landing_target.h | 2 +- common/mavlink_msg_link_node_status.h | 2 +- common/mavlink_msg_local_position_ned.h | 2 +- common/mavlink_msg_local_position_ned_cov.h | 2 +- common/mavlink_msg_local_position_ned_system_global_offset.h | 2 +- common/mavlink_msg_log_data.h | 2 +- common/mavlink_msg_log_entry.h | 2 +- common/mavlink_msg_log_erase.h | 2 +- common/mavlink_msg_log_request_data.h | 2 +- common/mavlink_msg_log_request_end.h | 2 +- common/mavlink_msg_log_request_list.h | 2 +- common/mavlink_msg_logging_ack.h | 2 +- common/mavlink_msg_logging_data.h | 2 +- common/mavlink_msg_logging_data_acked.h | 2 +- common/mavlink_msg_mag_cal_report.h | 2 +- common/mavlink_msg_manual_control.h | 2 +- common/mavlink_msg_manual_setpoint.h | 2 +- common/mavlink_msg_memory_vect.h | 2 +- common/mavlink_msg_message_interval.h | 2 +- common/mavlink_msg_mission_ack.h | 2 +- common/mavlink_msg_mission_clear_all.h | 2 +- common/mavlink_msg_mission_count.h | 2 +- common/mavlink_msg_mission_current.h | 2 +- common/mavlink_msg_mission_item.h | 2 +- common/mavlink_msg_mission_item_int.h | 2 +- common/mavlink_msg_mission_item_reached.h | 2 +- common/mavlink_msg_mission_request.h | 2 +- common/mavlink_msg_mission_request_int.h | 2 +- common/mavlink_msg_mission_request_list.h | 2 +- common/mavlink_msg_mission_request_partial_list.h | 2 +- common/mavlink_msg_mission_set_current.h | 2 +- common/mavlink_msg_mission_write_partial_list.h | 2 +- common/mavlink_msg_mount_orientation.h | 2 +- common/mavlink_msg_named_value_float.h | 2 +- common/mavlink_msg_named_value_int.h | 2 +- common/mavlink_msg_nav_controller_output.h | 2 +- common/mavlink_msg_obstacle_distance.h | 2 +- common/mavlink_msg_odometry.h | 2 +- common/mavlink_msg_onboard_computer_status.h | 2 +- common/mavlink_msg_open_drone_id_authentication.h | 2 +- common/mavlink_msg_open_drone_id_basic_id.h | 2 +- common/mavlink_msg_open_drone_id_location.h | 2 +- common/mavlink_msg_open_drone_id_message_pack.h | 2 +- common/mavlink_msg_open_drone_id_operator_id.h | 2 +- common/mavlink_msg_open_drone_id_self_id.h | 2 +- common/mavlink_msg_open_drone_id_system.h | 2 +- common/mavlink_msg_optical_flow.h | 2 +- common/mavlink_msg_optical_flow_rad.h | 2 +- common/mavlink_msg_orbit_execution_status.h | 2 +- common/mavlink_msg_param_ext_ack.h | 2 +- common/mavlink_msg_param_ext_request_list.h | 2 +- common/mavlink_msg_param_ext_request_read.h | 2 +- common/mavlink_msg_param_ext_set.h | 2 +- common/mavlink_msg_param_ext_value.h | 2 +- common/mavlink_msg_param_map_rc.h | 2 +- common/mavlink_msg_param_request_list.h | 2 +- common/mavlink_msg_param_request_read.h | 2 +- common/mavlink_msg_param_set.h | 2 +- common/mavlink_msg_param_value.h | 2 +- common/mavlink_msg_ping.h | 2 +- common/mavlink_msg_play_tune.h | 2 +- common/mavlink_msg_play_tune_v2.h | 2 +- common/mavlink_msg_position_target_global_int.h | 2 +- common/mavlink_msg_position_target_local_ned.h | 2 +- common/mavlink_msg_power_status.h | 2 +- common/mavlink_msg_radio_status.h | 2 +- common/mavlink_msg_raw_imu.h | 2 +- common/mavlink_msg_raw_pressure.h | 2 +- common/mavlink_msg_raw_rpm.h | 2 +- common/mavlink_msg_rc_channels.h | 2 +- common/mavlink_msg_rc_channels_override.h | 2 +- common/mavlink_msg_rc_channels_raw.h | 2 +- common/mavlink_msg_rc_channels_scaled.h | 2 +- common/mavlink_msg_request_data_stream.h | 2 +- common/mavlink_msg_request_event.h | 2 +- common/mavlink_msg_resource_request.h | 2 +- common/mavlink_msg_response_event_error.h | 2 +- common/mavlink_msg_safety_allowed_area.h | 2 +- common/mavlink_msg_safety_set_allowed_area.h | 2 +- common/mavlink_msg_scaled_imu.h | 2 +- common/mavlink_msg_scaled_imu2.h | 2 +- common/mavlink_msg_scaled_imu3.h | 2 +- common/mavlink_msg_scaled_pressure.h | 2 +- common/mavlink_msg_scaled_pressure2.h | 2 +- common/mavlink_msg_scaled_pressure3.h | 2 +- common/mavlink_msg_serial_control.h | 2 +- common/mavlink_msg_servo_output_raw.h | 2 +- common/mavlink_msg_set_actuator_control_target.h | 2 +- common/mavlink_msg_set_attitude_target.h | 2 +- common/mavlink_msg_set_gps_global_origin.h | 2 +- common/mavlink_msg_set_home_position.h | 2 +- common/mavlink_msg_set_mode.h | 2 +- common/mavlink_msg_set_position_target_global_int.h | 2 +- common/mavlink_msg_set_position_target_local_ned.h | 2 +- common/mavlink_msg_setup_signing.h | 2 +- common/mavlink_msg_sim_state.h | 2 +- common/mavlink_msg_smart_battery_info.h | 2 +- common/mavlink_msg_statustext.h | 2 +- common/mavlink_msg_storage_information.h | 2 +- common/mavlink_msg_supported_tunes.h | 2 +- common/mavlink_msg_sys_status.h | 2 +- common/mavlink_msg_system_time.h | 2 +- common/mavlink_msg_terrain_check.h | 2 +- common/mavlink_msg_terrain_data.h | 2 +- common/mavlink_msg_terrain_report.h | 2 +- common/mavlink_msg_terrain_request.h | 2 +- common/mavlink_msg_time_estimate_to_target.h | 2 +- common/mavlink_msg_timesync.h | 2 +- common/mavlink_msg_trajectory_representation_bezier.h | 2 +- common/mavlink_msg_trajectory_representation_waypoints.h | 2 +- common/mavlink_msg_tunnel.h | 2 +- common/mavlink_msg_uavcan_node_info.h | 2 +- common/mavlink_msg_uavcan_node_status.h | 2 +- common/mavlink_msg_utm_global_position.h | 2 +- common/mavlink_msg_v2_extension.h | 2 +- common/mavlink_msg_vfr_hud.h | 2 +- common/mavlink_msg_vibration.h | 2 +- common/mavlink_msg_vicon_position_estimate.h | 2 +- common/mavlink_msg_video_stream_information.h | 2 +- common/mavlink_msg_video_stream_status.h | 2 +- common/mavlink_msg_vision_position_estimate.h | 2 +- common/mavlink_msg_vision_speed_estimate.h | 2 +- common/mavlink_msg_wheel_distance.h | 2 +- common/mavlink_msg_wifi_config_ap.h | 2 +- common/mavlink_msg_winch_status.h | 2 +- common/mavlink_msg_wind_cov.h | 2 +- development/mavlink_msg_airspeed.h | 2 +- development/mavlink_msg_component_information_basic.h | 2 +- development/mavlink_msg_group_end.h | 2 +- development/mavlink_msg_group_start.h | 2 +- development/mavlink_msg_mission_changed.h | 2 +- development/mavlink_msg_mission_checksum.h | 2 +- development/mavlink_msg_param_ack_transaction.h | 2 +- development/mavlink_msg_wifi_network_info.h | 2 +- icarous/mavlink_msg_icarous_heartbeat.h | 2 +- icarous/mavlink_msg_icarous_kinematic_bands.h | 2 +- matrixpilot/mavlink_msg_airspeeds.h | 2 +- matrixpilot/mavlink_msg_altitudes.h | 2 +- matrixpilot/mavlink_msg_flexifunction_buffer_function.h | 2 +- matrixpilot/mavlink_msg_flexifunction_buffer_function_ack.h | 2 +- matrixpilot/mavlink_msg_flexifunction_command.h | 2 +- matrixpilot/mavlink_msg_flexifunction_command_ack.h | 2 +- matrixpilot/mavlink_msg_flexifunction_directory.h | 2 +- matrixpilot/mavlink_msg_flexifunction_directory_ack.h | 2 +- matrixpilot/mavlink_msg_flexifunction_read_req.h | 2 +- matrixpilot/mavlink_msg_flexifunction_set.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f13.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f14.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f15.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f16.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f17.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f18.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f19.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f20.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f21.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f22.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f2_a.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f2_b.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f4.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f5.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f6.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f7.h | 2 +- matrixpilot/mavlink_msg_serial_udb_extra_f8.h | 2 +- mavlink_helpers.h | 5 +++-- minimal/mavlink_msg_heartbeat.h | 2 +- minimal/mavlink_msg_protocol_version.h | 2 +- test/mavlink_msg_test_types.h | 2 +- uAvionix/mavlink_msg_uavionix_adsb_out_cfg.h | 2 +- uAvionix/mavlink_msg_uavionix_adsb_out_dynamic.h | 2 +- .../mavlink_msg_uavionix_adsb_transceiver_health_report.h | 2 +- 340 files changed, 342 insertions(+), 341 deletions(-) diff --git a/ASLUAV/mavlink_msg_asl_obctrl.h b/ASLUAV/mavlink_msg_asl_obctrl.h index 32d71623..34d1b57f 100644 --- a/ASLUAV/mavlink_msg_asl_obctrl.h +++ b/ASLUAV/mavlink_msg_asl_obctrl.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_asl_obctrl_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_ASL_OBCTRL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_aslctrl_data.h b/ASLUAV/mavlink_msg_aslctrl_data.h index 7c70a5b6..ecd9128e 100644 --- a/ASLUAV/mavlink_msg_aslctrl_data.h +++ b/ASLUAV/mavlink_msg_aslctrl_data.h @@ -446,7 +446,7 @@ static inline void mavlink_msg_aslctrl_data_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_ASLCTRL_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_aslctrl_debug.h b/ASLUAV/mavlink_msg_aslctrl_debug.h index 6d3d9ca6..e4c4f4ec 100644 --- a/ASLUAV/mavlink_msg_aslctrl_debug.h +++ b/ASLUAV/mavlink_msg_aslctrl_debug.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_aslctrl_debug_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_ASLCTRL_DEBUG_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_asluav_status.h b/ASLUAV/mavlink_msg_asluav_status.h index 0c983b93..087f6250 100644 --- a/ASLUAV/mavlink_msg_asluav_status.h +++ b/ASLUAV/mavlink_msg_asluav_status.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_asluav_status_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_ASLUAV_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_command_int_stamped.h b/ASLUAV/mavlink_msg_command_int_stamped.h index bf622717..5f2a258d 100644 --- a/ASLUAV/mavlink_msg_command_int_stamped.h +++ b/ASLUAV/mavlink_msg_command_int_stamped.h @@ -326,7 +326,7 @@ static inline void mavlink_msg_command_int_stamped_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_COMMAND_INT_STAMPED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_command_long_stamped.h b/ASLUAV/mavlink_msg_command_long_stamped.h index fb289179..dd2d18bf 100644 --- a/ASLUAV/mavlink_msg_command_long_stamped.h +++ b/ASLUAV/mavlink_msg_command_long_stamped.h @@ -302,7 +302,7 @@ static inline void mavlink_msg_command_long_stamped_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_COMMAND_LONG_STAMPED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_ekf_ext.h b/ASLUAV/mavlink_msg_ekf_ext.h index 628f02c0..a9952020 100644 --- a/ASLUAV/mavlink_msg_ekf_ext.h +++ b/ASLUAV/mavlink_msg_ekf_ext.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_ekf_ext_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_EKF_EXT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_fw_soaring_data.h b/ASLUAV/mavlink_msg_fw_soaring_data.h index b66945a9..02413bcd 100644 --- a/ASLUAV/mavlink_msg_fw_soaring_data.h +++ b/ASLUAV/mavlink_msg_fw_soaring_data.h @@ -446,7 +446,7 @@ static inline void mavlink_msg_fw_soaring_data_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_FW_SOARING_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_gsm_link_status.h b/ASLUAV/mavlink_msg_gsm_link_status.h index cafe2368..eff27054 100644 --- a/ASLUAV/mavlink_msg_gsm_link_status.h +++ b/ASLUAV/mavlink_msg_gsm_link_status.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_gsm_link_status_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_GSM_LINK_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_satcom_link_status.h b/ASLUAV/mavlink_msg_satcom_link_status.h index 6b871c58..f5422322 100644 --- a/ASLUAV/mavlink_msg_satcom_link_status.h +++ b/ASLUAV/mavlink_msg_satcom_link_status.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_satcom_link_status_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_SATCOM_LINK_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_sens_atmos.h b/ASLUAV/mavlink_msg_sens_atmos.h index 3fe26951..5cd205b5 100644 --- a/ASLUAV/mavlink_msg_sens_atmos.h +++ b/ASLUAV/mavlink_msg_sens_atmos.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_sens_atmos_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_SENS_ATMOS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_sens_batmon.h b/ASLUAV/mavlink_msg_sens_batmon.h index 35d06bab..6fe4ec62 100644 --- a/ASLUAV/mavlink_msg_sens_batmon.h +++ b/ASLUAV/mavlink_msg_sens_batmon.h @@ -326,7 +326,7 @@ static inline void mavlink_msg_sens_batmon_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_SENS_BATMON_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_sens_mppt.h b/ASLUAV/mavlink_msg_sens_mppt.h index 5b8b1fa0..4fe51c5c 100644 --- a/ASLUAV/mavlink_msg_sens_mppt.h +++ b/ASLUAV/mavlink_msg_sens_mppt.h @@ -302,7 +302,7 @@ static inline void mavlink_msg_sens_mppt_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_SENS_MPPT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_sens_power.h b/ASLUAV/mavlink_msg_sens_power.h index 394b0f5f..0b8ef5a5 100644 --- a/ASLUAV/mavlink_msg_sens_power.h +++ b/ASLUAV/mavlink_msg_sens_power.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_sens_power_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_SENS_POWER_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_sens_power_board.h b/ASLUAV/mavlink_msg_sens_power_board.h index 025f911a..7f20b906 100644 --- a/ASLUAV/mavlink_msg_sens_power_board.h +++ b/ASLUAV/mavlink_msg_sens_power_board.h @@ -290,7 +290,7 @@ static inline void mavlink_msg_sens_power_board_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_SENS_POWER_BOARD_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_sensor_airflow_angles.h b/ASLUAV/mavlink_msg_sensor_airflow_angles.h index 7c9ea041..ac997a14 100644 --- a/ASLUAV/mavlink_msg_sensor_airflow_angles.h +++ b/ASLUAV/mavlink_msg_sensor_airflow_angles.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_sensor_airflow_angles_send_struct(mavlink_channel #if MAVLINK_MSG_ID_SENSOR_AIRFLOW_ANGLES_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ASLUAV/mavlink_msg_sensorpod_status.h b/ASLUAV/mavlink_msg_sensorpod_status.h index 72b9d6c6..aa6b9039 100644 --- a/ASLUAV/mavlink_msg_sensorpod_status.h +++ b/ASLUAV/mavlink_msg_sensorpod_status.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_sensorpod_status_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_SENSORPOD_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_adap_tuning.h b/ardupilotmega/mavlink_msg_adap_tuning.h index ff2669f2..e0c75853 100644 --- a/ardupilotmega/mavlink_msg_adap_tuning.h +++ b/ardupilotmega/mavlink_msg_adap_tuning.h @@ -302,7 +302,7 @@ static inline void mavlink_msg_adap_tuning_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_ADAP_TUNING_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_ahrs.h b/ardupilotmega/mavlink_msg_ahrs.h index c201a96e..4378c24a 100644 --- a/ardupilotmega/mavlink_msg_ahrs.h +++ b/ardupilotmega/mavlink_msg_ahrs.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_ahrs_send_struct(mavlink_channel_t chan, const ma #if MAVLINK_MSG_ID_AHRS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_ahrs2.h b/ardupilotmega/mavlink_msg_ahrs2.h index 9713cf2a..909010ad 100644 --- a/ardupilotmega/mavlink_msg_ahrs2.h +++ b/ardupilotmega/mavlink_msg_ahrs2.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_ahrs2_send_struct(mavlink_channel_t chan, const m #if MAVLINK_MSG_ID_AHRS2_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_ahrs3.h b/ardupilotmega/mavlink_msg_ahrs3.h index 1b20d660..606e5b06 100644 --- a/ardupilotmega/mavlink_msg_ahrs3.h +++ b/ardupilotmega/mavlink_msg_ahrs3.h @@ -266,7 +266,7 @@ static inline void mavlink_msg_ahrs3_send_struct(mavlink_channel_t chan, const m #if MAVLINK_MSG_ID_AHRS3_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_airspeed_autocal.h b/ardupilotmega/mavlink_msg_airspeed_autocal.h index 952e0737..322f8865 100644 --- a/ardupilotmega/mavlink_msg_airspeed_autocal.h +++ b/ardupilotmega/mavlink_msg_airspeed_autocal.h @@ -290,7 +290,7 @@ static inline void mavlink_msg_airspeed_autocal_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_AIRSPEED_AUTOCAL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_aoa_ssa.h b/ardupilotmega/mavlink_msg_aoa_ssa.h index 74a17590..c4a7ec0e 100644 --- a/ardupilotmega/mavlink_msg_aoa_ssa.h +++ b/ardupilotmega/mavlink_msg_aoa_ssa.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_aoa_ssa_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_AOA_SSA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_ap_adc.h b/ardupilotmega/mavlink_msg_ap_adc.h index 54dc7036..37a69c76 100644 --- a/ardupilotmega/mavlink_msg_ap_adc.h +++ b/ardupilotmega/mavlink_msg_ap_adc.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_ap_adc_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_AP_ADC_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_autopilot_version_request.h b/ardupilotmega/mavlink_msg_autopilot_version_request.h index a24ccf25..ab63d885 100644 --- a/ardupilotmega/mavlink_msg_autopilot_version_request.h +++ b/ardupilotmega/mavlink_msg_autopilot_version_request.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_autopilot_version_request_send_struct(mavlink_cha #if MAVLINK_MSG_ID_AUTOPILOT_VERSION_REQUEST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_battery2.h b/ardupilotmega/mavlink_msg_battery2.h index cd11156a..ac027150 100644 --- a/ardupilotmega/mavlink_msg_battery2.h +++ b/ardupilotmega/mavlink_msg_battery2.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_battery2_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_BATTERY2_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_camera_feedback.h b/ardupilotmega/mavlink_msg_camera_feedback.h index 4b8b6fff..e1926801 100644 --- a/ardupilotmega/mavlink_msg_camera_feedback.h +++ b/ardupilotmega/mavlink_msg_camera_feedback.h @@ -314,7 +314,7 @@ static inline void mavlink_msg_camera_feedback_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_CAMERA_FEEDBACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_camera_status.h b/ardupilotmega/mavlink_msg_camera_status.h index 4d002f44..813b14b9 100644 --- a/ardupilotmega/mavlink_msg_camera_status.h +++ b/ardupilotmega/mavlink_msg_camera_status.h @@ -254,7 +254,7 @@ static inline void mavlink_msg_camera_status_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_CAMERA_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_compassmot_status.h b/ardupilotmega/mavlink_msg_compassmot_status.h index 6bad800a..a074afbd 100644 --- a/ardupilotmega/mavlink_msg_compassmot_status.h +++ b/ardupilotmega/mavlink_msg_compassmot_status.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_compassmot_status_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_data16.h b/ardupilotmega/mavlink_msg_data16.h index 3ef331d1..d0049754 100644 --- a/ardupilotmega/mavlink_msg_data16.h +++ b/ardupilotmega/mavlink_msg_data16.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_data16_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_DATA16_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_data32.h b/ardupilotmega/mavlink_msg_data32.h index 00fe3689..fc7b84c6 100644 --- a/ardupilotmega/mavlink_msg_data32.h +++ b/ardupilotmega/mavlink_msg_data32.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_data32_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_DATA32_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_data64.h b/ardupilotmega/mavlink_msg_data64.h index 471e2ce0..4ee7ebb9 100644 --- a/ardupilotmega/mavlink_msg_data64.h +++ b/ardupilotmega/mavlink_msg_data64.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_data64_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_DATA64_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_data96.h b/ardupilotmega/mavlink_msg_data96.h index ec8efe51..8c198715 100644 --- a/ardupilotmega/mavlink_msg_data96.h +++ b/ardupilotmega/mavlink_msg_data96.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_data96_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_DATA96_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_deepstall.h b/ardupilotmega/mavlink_msg_deepstall.h index e3961642..3e5bd1d6 100644 --- a/ardupilotmega/mavlink_msg_deepstall.h +++ b/ardupilotmega/mavlink_msg_deepstall.h @@ -266,7 +266,7 @@ static inline void mavlink_msg_deepstall_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_DEEPSTALL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_device_op_read.h b/ardupilotmega/mavlink_msg_device_op_read.h index d9923152..7c9bd94c 100644 --- a/ardupilotmega/mavlink_msg_device_op_read.h +++ b/ardupilotmega/mavlink_msg_device_op_read.h @@ -260,7 +260,7 @@ static inline void mavlink_msg_device_op_read_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_DEVICE_OP_READ_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_device_op_read_reply.h b/ardupilotmega/mavlink_msg_device_op_read_reply.h index f5f056f2..5af17221 100644 --- a/ardupilotmega/mavlink_msg_device_op_read_reply.h +++ b/ardupilotmega/mavlink_msg_device_op_read_reply.h @@ -212,7 +212,7 @@ static inline void mavlink_msg_device_op_read_reply_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_DEVICE_OP_READ_REPLY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_device_op_write.h b/ardupilotmega/mavlink_msg_device_op_write.h index c0bc77c4..bf10129f 100644 --- a/ardupilotmega/mavlink_msg_device_op_write.h +++ b/ardupilotmega/mavlink_msg_device_op_write.h @@ -273,7 +273,7 @@ static inline void mavlink_msg_device_op_write_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_DEVICE_OP_WRITE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_device_op_write_reply.h b/ardupilotmega/mavlink_msg_device_op_write_reply.h index 7b321f10..751cd6ce 100644 --- a/ardupilotmega/mavlink_msg_device_op_write_reply.h +++ b/ardupilotmega/mavlink_msg_device_op_write_reply.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_device_op_write_reply_send_struct(mavlink_channel #if MAVLINK_MSG_ID_DEVICE_OP_WRITE_REPLY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_digicam_configure.h b/ardupilotmega/mavlink_msg_digicam_configure.h index 255536e8..ab1c26ba 100644 --- a/ardupilotmega/mavlink_msg_digicam_configure.h +++ b/ardupilotmega/mavlink_msg_digicam_configure.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_digicam_configure_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_DIGICAM_CONFIGURE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_digicam_control.h b/ardupilotmega/mavlink_msg_digicam_control.h index 6b144cc8..1845a06f 100644 --- a/ardupilotmega/mavlink_msg_digicam_control.h +++ b/ardupilotmega/mavlink_msg_digicam_control.h @@ -266,7 +266,7 @@ static inline void mavlink_msg_digicam_control_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_DIGICAM_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_ekf_status_report.h b/ardupilotmega/mavlink_msg_ekf_status_report.h index 395e11d4..0cc99a84 100644 --- a/ardupilotmega/mavlink_msg_ekf_status_report.h +++ b/ardupilotmega/mavlink_msg_ekf_status_report.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_ekf_status_report_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_EKF_STATUS_REPORT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_esc_telemetry_1_to_4.h b/ardupilotmega/mavlink_msg_esc_telemetry_1_to_4.h index ecd27b35..4178184f 100644 --- a/ardupilotmega/mavlink_msg_esc_telemetry_1_to_4.h +++ b/ardupilotmega/mavlink_msg_esc_telemetry_1_to_4.h @@ -223,7 +223,7 @@ static inline void mavlink_msg_esc_telemetry_1_to_4_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_ESC_TELEMETRY_1_TO_4_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_esc_telemetry_5_to_8.h b/ardupilotmega/mavlink_msg_esc_telemetry_5_to_8.h index 98d9ce72..45a6ca12 100644 --- a/ardupilotmega/mavlink_msg_esc_telemetry_5_to_8.h +++ b/ardupilotmega/mavlink_msg_esc_telemetry_5_to_8.h @@ -223,7 +223,7 @@ static inline void mavlink_msg_esc_telemetry_5_to_8_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_ESC_TELEMETRY_5_TO_8_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_esc_telemetry_9_to_12.h b/ardupilotmega/mavlink_msg_esc_telemetry_9_to_12.h index 9660bc38..58d06ffd 100644 --- a/ardupilotmega/mavlink_msg_esc_telemetry_9_to_12.h +++ b/ardupilotmega/mavlink_msg_esc_telemetry_9_to_12.h @@ -223,7 +223,7 @@ static inline void mavlink_msg_esc_telemetry_9_to_12_send_struct(mavlink_channel #if MAVLINK_MSG_ID_ESC_TELEMETRY_9_TO_12_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_fence_fetch_point.h b/ardupilotmega/mavlink_msg_fence_fetch_point.h index ce2f54e7..f6521001 100644 --- a/ardupilotmega/mavlink_msg_fence_fetch_point.h +++ b/ardupilotmega/mavlink_msg_fence_fetch_point.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_fence_fetch_point_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_FENCE_FETCH_POINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_fence_point.h b/ardupilotmega/mavlink_msg_fence_point.h index 41140ac3..486c432e 100644 --- a/ardupilotmega/mavlink_msg_fence_point.h +++ b/ardupilotmega/mavlink_msg_fence_point.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_fence_point_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_FENCE_POINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_gimbal_control.h b/ardupilotmega/mavlink_msg_gimbal_control.h index 71c972c9..10ce7d9c 100644 --- a/ardupilotmega/mavlink_msg_gimbal_control.h +++ b/ardupilotmega/mavlink_msg_gimbal_control.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_gimbal_control_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_GIMBAL_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_gimbal_report.h b/ardupilotmega/mavlink_msg_gimbal_report.h index 65199101..206e0321 100644 --- a/ardupilotmega/mavlink_msg_gimbal_report.h +++ b/ardupilotmega/mavlink_msg_gimbal_report.h @@ -290,7 +290,7 @@ static inline void mavlink_msg_gimbal_report_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_GIMBAL_REPORT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_gimbal_torque_cmd_report.h b/ardupilotmega/mavlink_msg_gimbal_torque_cmd_report.h index d4eb57c2..1ced0499 100644 --- a/ardupilotmega/mavlink_msg_gimbal_torque_cmd_report.h +++ b/ardupilotmega/mavlink_msg_gimbal_torque_cmd_report.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_gimbal_torque_cmd_report_send_struct(mavlink_chan #if MAVLINK_MSG_ID_GIMBAL_TORQUE_CMD_REPORT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_gopro_get_request.h b/ardupilotmega/mavlink_msg_gopro_get_request.h index aa2630a5..87728349 100644 --- a/ardupilotmega/mavlink_msg_gopro_get_request.h +++ b/ardupilotmega/mavlink_msg_gopro_get_request.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_gopro_get_request_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_GOPRO_GET_REQUEST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_gopro_get_response.h b/ardupilotmega/mavlink_msg_gopro_get_response.h index b1eee0b1..39ad341b 100644 --- a/ardupilotmega/mavlink_msg_gopro_get_response.h +++ b/ardupilotmega/mavlink_msg_gopro_get_response.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_gopro_get_response_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_GOPRO_GET_RESPONSE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_gopro_heartbeat.h b/ardupilotmega/mavlink_msg_gopro_heartbeat.h index 5fc36440..9e82cb22 100644 --- a/ardupilotmega/mavlink_msg_gopro_heartbeat.h +++ b/ardupilotmega/mavlink_msg_gopro_heartbeat.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_gopro_heartbeat_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_GOPRO_HEARTBEAT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_gopro_set_request.h b/ardupilotmega/mavlink_msg_gopro_set_request.h index 771c6149..49eab02d 100644 --- a/ardupilotmega/mavlink_msg_gopro_set_request.h +++ b/ardupilotmega/mavlink_msg_gopro_set_request.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_gopro_set_request_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_GOPRO_SET_REQUEST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_gopro_set_response.h b/ardupilotmega/mavlink_msg_gopro_set_response.h index 1a187cae..a49ba354 100644 --- a/ardupilotmega/mavlink_msg_gopro_set_response.h +++ b/ardupilotmega/mavlink_msg_gopro_set_response.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_gopro_set_response_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_GOPRO_SET_RESPONSE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_hwstatus.h b/ardupilotmega/mavlink_msg_hwstatus.h index b36c60d9..86a7e408 100644 --- a/ardupilotmega/mavlink_msg_hwstatus.h +++ b/ardupilotmega/mavlink_msg_hwstatus.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_hwstatus_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_HWSTATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_led_control.h b/ardupilotmega/mavlink_msg_led_control.h index 4a66f7d0..58825c7e 100644 --- a/ardupilotmega/mavlink_msg_led_control.h +++ b/ardupilotmega/mavlink_msg_led_control.h @@ -212,7 +212,7 @@ static inline void mavlink_msg_led_control_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_LED_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_limits_status.h b/ardupilotmega/mavlink_msg_limits_status.h index c3531202..69661789 100644 --- a/ardupilotmega/mavlink_msg_limits_status.h +++ b/ardupilotmega/mavlink_msg_limits_status.h @@ -254,7 +254,7 @@ static inline void mavlink_msg_limits_status_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_LIMITS_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_mag_cal_progress.h b/ardupilotmega/mavlink_msg_mag_cal_progress.h index 018469ed..2210c921 100644 --- a/ardupilotmega/mavlink_msg_mag_cal_progress.h +++ b/ardupilotmega/mavlink_msg_mag_cal_progress.h @@ -248,7 +248,7 @@ static inline void mavlink_msg_mag_cal_progress_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_MAG_CAL_PROGRESS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_mcu_status.h b/ardupilotmega/mavlink_msg_mcu_status.h index 94ac66b9..a6b15d70 100644 --- a/ardupilotmega/mavlink_msg_mcu_status.h +++ b/ardupilotmega/mavlink_msg_mcu_status.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_mcu_status_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_MCU_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_meminfo.h b/ardupilotmega/mavlink_msg_meminfo.h index 05e08f60..1eaf6096 100644 --- a/ardupilotmega/mavlink_msg_meminfo.h +++ b/ardupilotmega/mavlink_msg_meminfo.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_meminfo_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_MEMINFO_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_mount_configure.h b/ardupilotmega/mavlink_msg_mount_configure.h index 941a8d34..0965a394 100644 --- a/ardupilotmega/mavlink_msg_mount_configure.h +++ b/ardupilotmega/mavlink_msg_mount_configure.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_mount_configure_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_MOUNT_CONFIGURE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_mount_control.h b/ardupilotmega/mavlink_msg_mount_control.h index aba4bc2e..000bbcd7 100644 --- a/ardupilotmega/mavlink_msg_mount_control.h +++ b/ardupilotmega/mavlink_msg_mount_control.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_mount_control_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_MOUNT_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_mount_status.h b/ardupilotmega/mavlink_msg_mount_status.h index c5ef87b1..ff6c101e 100644 --- a/ardupilotmega/mavlink_msg_mount_status.h +++ b/ardupilotmega/mavlink_msg_mount_status.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_mount_status_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_MOUNT_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_obstacle_distance_3d.h b/ardupilotmega/mavlink_msg_obstacle_distance_3d.h index ee06d7e5..ac5a55be 100644 --- a/ardupilotmega/mavlink_msg_obstacle_distance_3d.h +++ b/ardupilotmega/mavlink_msg_obstacle_distance_3d.h @@ -254,7 +254,7 @@ static inline void mavlink_msg_obstacle_distance_3d_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_OBSTACLE_DISTANCE_3D_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_osd_param_config.h b/ardupilotmega/mavlink_msg_osd_param_config.h index f17ccbf4..c19d3db8 100644 --- a/ardupilotmega/mavlink_msg_osd_param_config.h +++ b/ardupilotmega/mavlink_msg_osd_param_config.h @@ -260,7 +260,7 @@ static inline void mavlink_msg_osd_param_config_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_OSD_PARAM_CONFIG_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_osd_param_config_reply.h b/ardupilotmega/mavlink_msg_osd_param_config_reply.h index 89fb5f54..e8e5e747 100644 --- a/ardupilotmega/mavlink_msg_osd_param_config_reply.h +++ b/ardupilotmega/mavlink_msg_osd_param_config_reply.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_osd_param_config_reply_send_struct(mavlink_channe #if MAVLINK_MSG_ID_OSD_PARAM_CONFIG_REPLY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_osd_param_show_config.h b/ardupilotmega/mavlink_msg_osd_param_show_config.h index b404672b..feb6f111 100644 --- a/ardupilotmega/mavlink_msg_osd_param_show_config.h +++ b/ardupilotmega/mavlink_msg_osd_param_show_config.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_osd_param_show_config_send_struct(mavlink_channel #if MAVLINK_MSG_ID_OSD_PARAM_SHOW_CONFIG_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_osd_param_show_config_reply.h b/ardupilotmega/mavlink_msg_osd_param_show_config_reply.h index 33a7e631..92c448f8 100644 --- a/ardupilotmega/mavlink_msg_osd_param_show_config_reply.h +++ b/ardupilotmega/mavlink_msg_osd_param_show_config_reply.h @@ -224,7 +224,7 @@ static inline void mavlink_msg_osd_param_show_config_reply_send_struct(mavlink_c #if MAVLINK_MSG_ID_OSD_PARAM_SHOW_CONFIG_REPLY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_pid_tuning.h b/ardupilotmega/mavlink_msg_pid_tuning.h index e557971a..fb88e60f 100644 --- a/ardupilotmega/mavlink_msg_pid_tuning.h +++ b/ardupilotmega/mavlink_msg_pid_tuning.h @@ -254,7 +254,7 @@ static inline void mavlink_msg_pid_tuning_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_PID_TUNING_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_radio.h b/ardupilotmega/mavlink_msg_radio.h index 76ffe43a..1afb4d73 100644 --- a/ardupilotmega/mavlink_msg_radio.h +++ b/ardupilotmega/mavlink_msg_radio.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_radio_send_struct(mavlink_channel_t chan, const m #if MAVLINK_MSG_ID_RADIO_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_rally_fetch_point.h b/ardupilotmega/mavlink_msg_rally_fetch_point.h index f9c08d10..29111e0b 100644 --- a/ardupilotmega/mavlink_msg_rally_fetch_point.h +++ b/ardupilotmega/mavlink_msg_rally_fetch_point.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_rally_fetch_point_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_RALLY_FETCH_POINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_rally_point.h b/ardupilotmega/mavlink_msg_rally_point.h index 1d214d9a..d16440ed 100644 --- a/ardupilotmega/mavlink_msg_rally_point.h +++ b/ardupilotmega/mavlink_msg_rally_point.h @@ -266,7 +266,7 @@ static inline void mavlink_msg_rally_point_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_RALLY_POINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_rangefinder.h b/ardupilotmega/mavlink_msg_rangefinder.h index b75fedf2..88476b16 100644 --- a/ardupilotmega/mavlink_msg_rangefinder.h +++ b/ardupilotmega/mavlink_msg_rangefinder.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_rangefinder_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_RANGEFINDER_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_remote_log_block_status.h b/ardupilotmega/mavlink_msg_remote_log_block_status.h index 1a8f0eab..521e9fba 100644 --- a/ardupilotmega/mavlink_msg_remote_log_block_status.h +++ b/ardupilotmega/mavlink_msg_remote_log_block_status.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_remote_log_block_status_send_struct(mavlink_chann #if MAVLINK_MSG_ID_REMOTE_LOG_BLOCK_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_remote_log_data_block.h b/ardupilotmega/mavlink_msg_remote_log_data_block.h index 2ed0ce6f..7fcc6ba1 100644 --- a/ardupilotmega/mavlink_msg_remote_log_data_block.h +++ b/ardupilotmega/mavlink_msg_remote_log_data_block.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_remote_log_data_block_send_struct(mavlink_channel #if MAVLINK_MSG_ID_REMOTE_LOG_DATA_BLOCK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_rpm.h b/ardupilotmega/mavlink_msg_rpm.h index 76065875..480b5b80 100644 --- a/ardupilotmega/mavlink_msg_rpm.h +++ b/ardupilotmega/mavlink_msg_rpm.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_rpm_send_struct(mavlink_channel_t chan, const mav #if MAVLINK_MSG_ID_RPM_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_sensor_offsets.h b/ardupilotmega/mavlink_msg_sensor_offsets.h index 8de1894b..cb92007d 100644 --- a/ardupilotmega/mavlink_msg_sensor_offsets.h +++ b/ardupilotmega/mavlink_msg_sensor_offsets.h @@ -290,7 +290,7 @@ static inline void mavlink_msg_sensor_offsets_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_SENSOR_OFFSETS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_set_mag_offsets.h b/ardupilotmega/mavlink_msg_set_mag_offsets.h index a385294a..37308590 100644 --- a/ardupilotmega/mavlink_msg_set_mag_offsets.h +++ b/ardupilotmega/mavlink_msg_set_mag_offsets.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_set_mag_offsets_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_SET_MAG_OFFSETS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_simstate.h b/ardupilotmega/mavlink_msg_simstate.h index 54cdce4d..795d595b 100644 --- a/ardupilotmega/mavlink_msg_simstate.h +++ b/ardupilotmega/mavlink_msg_simstate.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_simstate_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_SIMSTATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_vision_position_delta.h b/ardupilotmega/mavlink_msg_vision_position_delta.h index d0655d1e..abc3e93b 100644 --- a/ardupilotmega/mavlink_msg_vision_position_delta.h +++ b/ardupilotmega/mavlink_msg_vision_position_delta.h @@ -201,7 +201,7 @@ static inline void mavlink_msg_vision_position_delta_send_struct(mavlink_channel #if MAVLINK_MSG_ID_VISION_POSITION_DELTA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_water_depth.h b/ardupilotmega/mavlink_msg_water_depth.h index 8e28be63..3b6fa8da 100644 --- a/ardupilotmega/mavlink_msg_water_depth.h +++ b/ardupilotmega/mavlink_msg_water_depth.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_water_depth_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_WATER_DEPTH_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/ardupilotmega/mavlink_msg_wind.h b/ardupilotmega/mavlink_msg_wind.h index 77b1c103..d10b05d0 100644 --- a/ardupilotmega/mavlink_msg_wind.h +++ b/ardupilotmega/mavlink_msg_wind.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_wind_send_struct(mavlink_channel_t chan, const ma #if MAVLINK_MSG_ID_WIND_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/checksum.h b/checksum.h index 0a899a60..d0d011d1 100644 --- a/checksum.h +++ b/checksum.h @@ -45,7 +45,7 @@ static inline void crc_accumulate(uint8_t data, uint16_t *crcAccum) /** - * @brief Initiliaze the buffer for the MCRF4XX CRC16 + * @brief Initialize the buffer for the MCRF4XX CRC16 * * @param crcAccum the 16 bit MCRF4XX CRC16 */ diff --git a/common/mavlink_msg_actuator_control_target.h b/common/mavlink_msg_actuator_control_target.h index 31e307cb..c5ad9f65 100644 --- a/common/mavlink_msg_actuator_control_target.h +++ b/common/mavlink_msg_actuator_control_target.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_actuator_control_target_send_struct(mavlink_chann #if MAVLINK_MSG_ID_ACTUATOR_CONTROL_TARGET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_actuator_output_status.h b/common/mavlink_msg_actuator_output_status.h index 52ee04df..4fc1069b 100644 --- a/common/mavlink_msg_actuator_output_status.h +++ b/common/mavlink_msg_actuator_output_status.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_actuator_output_status_send_struct(mavlink_channe #if MAVLINK_MSG_ID_ACTUATOR_OUTPUT_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_adsb_vehicle.h b/common/mavlink_msg_adsb_vehicle.h index 7296c22a..d6220289 100644 --- a/common/mavlink_msg_adsb_vehicle.h +++ b/common/mavlink_msg_adsb_vehicle.h @@ -296,7 +296,7 @@ static inline void mavlink_msg_adsb_vehicle_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_ADSB_VEHICLE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_ais_vessel.h b/common/mavlink_msg_ais_vessel.h index e97fe42b..1e1287b7 100644 --- a/common/mavlink_msg_ais_vessel.h +++ b/common/mavlink_msg_ais_vessel.h @@ -345,7 +345,7 @@ static inline void mavlink_msg_ais_vessel_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_AIS_VESSEL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_altitude.h b/common/mavlink_msg_altitude.h index 1424f0ab..41f61274 100644 --- a/common/mavlink_msg_altitude.h +++ b/common/mavlink_msg_altitude.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_altitude_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_ALTITUDE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_att_pos_mocap.h b/common/mavlink_msg_att_pos_mocap.h index 2bf0bfd1..277acc78 100644 --- a/common/mavlink_msg_att_pos_mocap.h +++ b/common/mavlink_msg_att_pos_mocap.h @@ -213,7 +213,7 @@ static inline void mavlink_msg_att_pos_mocap_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_ATT_POS_MOCAP_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_attitude.h b/common/mavlink_msg_attitude.h index 6a8237c9..21c1a9f1 100644 --- a/common/mavlink_msg_attitude.h +++ b/common/mavlink_msg_attitude.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_attitude_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_ATTITUDE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_attitude_quaternion.h b/common/mavlink_msg_attitude_quaternion.h index a6138162..c22721d3 100644 --- a/common/mavlink_msg_attitude_quaternion.h +++ b/common/mavlink_msg_attitude_quaternion.h @@ -248,7 +248,7 @@ static inline void mavlink_msg_attitude_quaternion_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_ATTITUDE_QUATERNION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_attitude_quaternion_cov.h b/common/mavlink_msg_attitude_quaternion_cov.h index bc2351aa..766f070a 100644 --- a/common/mavlink_msg_attitude_quaternion_cov.h +++ b/common/mavlink_msg_attitude_quaternion_cov.h @@ -213,7 +213,7 @@ static inline void mavlink_msg_attitude_quaternion_cov_send_struct(mavlink_chann #if MAVLINK_MSG_ID_ATTITUDE_QUATERNION_COV_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_attitude_target.h b/common/mavlink_msg_attitude_target.h index bedbb93e..b67c07c8 100644 --- a/common/mavlink_msg_attitude_target.h +++ b/common/mavlink_msg_attitude_target.h @@ -224,7 +224,7 @@ static inline void mavlink_msg_attitude_target_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_ATTITUDE_TARGET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_auth_key.h b/common/mavlink_msg_auth_key.h index 57cd6916..9dd7007f 100644 --- a/common/mavlink_msg_auth_key.h +++ b/common/mavlink_msg_auth_key.h @@ -158,7 +158,7 @@ static inline void mavlink_msg_auth_key_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_AUTH_KEY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_autopilot_state_for_gimbal_device.h b/common/mavlink_msg_autopilot_state_for_gimbal_device.h index c9cdce8d..a4f0d8ad 100644 --- a/common/mavlink_msg_autopilot_state_for_gimbal_device.h +++ b/common/mavlink_msg_autopilot_state_for_gimbal_device.h @@ -284,7 +284,7 @@ static inline void mavlink_msg_autopilot_state_for_gimbal_device_send_struct(mav #if MAVLINK_MSG_ID_AUTOPILOT_STATE_FOR_GIMBAL_DEVICE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_autopilot_version.h b/common/mavlink_msg_autopilot_version.h index 8d642322..85df0d4e 100644 --- a/common/mavlink_msg_autopilot_version.h +++ b/common/mavlink_msg_autopilot_version.h @@ -287,7 +287,7 @@ static inline void mavlink_msg_autopilot_version_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_AUTOPILOT_VERSION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_battery_status.h b/common/mavlink_msg_battery_status.h index 084b2a38..357c483e 100644 --- a/common/mavlink_msg_battery_status.h +++ b/common/mavlink_msg_battery_status.h @@ -309,7 +309,7 @@ static inline void mavlink_msg_battery_status_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_BATTERY_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_button_change.h b/common/mavlink_msg_button_change.h index 831bc60f..8de4add2 100644 --- a/common/mavlink_msg_button_change.h +++ b/common/mavlink_msg_button_change.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_button_change_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_BUTTON_CHANGE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_camera_capture_status.h b/common/mavlink_msg_camera_capture_status.h index 94162112..87c3a8c5 100644 --- a/common/mavlink_msg_camera_capture_status.h +++ b/common/mavlink_msg_camera_capture_status.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_camera_capture_status_send_struct(mavlink_channel #if MAVLINK_MSG_ID_CAMERA_CAPTURE_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_camera_fov_status.h b/common/mavlink_msg_camera_fov_status.h index 6378e56a..8562973f 100644 --- a/common/mavlink_msg_camera_fov_status.h +++ b/common/mavlink_msg_camera_fov_status.h @@ -260,7 +260,7 @@ static inline void mavlink_msg_camera_fov_status_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_CAMERA_FOV_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_camera_image_captured.h b/common/mavlink_msg_camera_image_captured.h index 01d772b6..0169740b 100644 --- a/common/mavlink_msg_camera_image_captured.h +++ b/common/mavlink_msg_camera_image_captured.h @@ -273,7 +273,7 @@ static inline void mavlink_msg_camera_image_captured_send_struct(mavlink_channel #if MAVLINK_MSG_ID_CAMERA_IMAGE_CAPTURED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_camera_information.h b/common/mavlink_msg_camera_information.h index beef7cd2..35097140 100644 --- a/common/mavlink_msg_camera_information.h +++ b/common/mavlink_msg_camera_information.h @@ -298,7 +298,7 @@ static inline void mavlink_msg_camera_information_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_CAMERA_INFORMATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_camera_settings.h b/common/mavlink_msg_camera_settings.h index 8f49780f..77742770 100644 --- a/common/mavlink_msg_camera_settings.h +++ b/common/mavlink_msg_camera_settings.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_camera_settings_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_CAMERA_SETTINGS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_camera_tracking_geo_status.h b/common/mavlink_msg_camera_tracking_geo_status.h index f4e22b98..120b1e3d 100644 --- a/common/mavlink_msg_camera_tracking_geo_status.h +++ b/common/mavlink_msg_camera_tracking_geo_status.h @@ -302,7 +302,7 @@ static inline void mavlink_msg_camera_tracking_geo_status_send_struct(mavlink_ch #if MAVLINK_MSG_ID_CAMERA_TRACKING_GEO_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_camera_tracking_image_status.h b/common/mavlink_msg_camera_tracking_image_status.h index 5f703fce..bd5f0607 100644 --- a/common/mavlink_msg_camera_tracking_image_status.h +++ b/common/mavlink_msg_camera_tracking_image_status.h @@ -266,7 +266,7 @@ static inline void mavlink_msg_camera_tracking_image_status_send_struct(mavlink_ #if MAVLINK_MSG_ID_CAMERA_TRACKING_IMAGE_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_camera_trigger.h b/common/mavlink_msg_camera_trigger.h index ee2ad8e9..781ef441 100644 --- a/common/mavlink_msg_camera_trigger.h +++ b/common/mavlink_msg_camera_trigger.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_camera_trigger_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_CAMERA_TRIGGER_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_cellular_config.h b/common/mavlink_msg_cellular_config.h index 5b8a1fb7..54fc480c 100644 --- a/common/mavlink_msg_cellular_config.h +++ b/common/mavlink_msg_cellular_config.h @@ -239,7 +239,7 @@ static inline void mavlink_msg_cellular_config_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_CELLULAR_CONFIG_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_cellular_status.h b/common/mavlink_msg_cellular_status.h index 5b1c1958..6e58db56 100644 --- a/common/mavlink_msg_cellular_status.h +++ b/common/mavlink_msg_cellular_status.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_cellular_status_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_CELLULAR_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_change_operator_control.h b/common/mavlink_msg_change_operator_control.h index 8fea8d78..b36014fb 100644 --- a/common/mavlink_msg_change_operator_control.h +++ b/common/mavlink_msg_change_operator_control.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_change_operator_control_send_struct(mavlink_chann #if MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_change_operator_control_ack.h b/common/mavlink_msg_change_operator_control_ack.h index d35d444b..5eb073ef 100644 --- a/common/mavlink_msg_change_operator_control_ack.h +++ b/common/mavlink_msg_change_operator_control_ack.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_change_operator_control_ack_send_struct(mavlink_c #if MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_collision.h b/common/mavlink_msg_collision.h index b7d8a07f..38759563 100644 --- a/common/mavlink_msg_collision.h +++ b/common/mavlink_msg_collision.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_collision_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_COLLISION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_command_ack.h b/common/mavlink_msg_command_ack.h index 7ee9a4b8..c76aa6d1 100644 --- a/common/mavlink_msg_command_ack.h +++ b/common/mavlink_msg_command_ack.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_command_ack_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_COMMAND_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_command_cancel.h b/common/mavlink_msg_command_cancel.h index 0ad7dac5..3dc955de 100644 --- a/common/mavlink_msg_command_cancel.h +++ b/common/mavlink_msg_command_cancel.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_command_cancel_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_COMMAND_CANCEL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_command_int.h b/common/mavlink_msg_command_int.h index a23f5089..946a5b57 100644 --- a/common/mavlink_msg_command_int.h +++ b/common/mavlink_msg_command_int.h @@ -302,7 +302,7 @@ static inline void mavlink_msg_command_int_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_COMMAND_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_command_long.h b/common/mavlink_msg_command_long.h index 6a9a1698..b7683778 100644 --- a/common/mavlink_msg_command_long.h +++ b/common/mavlink_msg_command_long.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_command_long_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_COMMAND_LONG_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_component_information.h b/common/mavlink_msg_component_information.h index 5f85a4ba..565caae5 100644 --- a/common/mavlink_msg_component_information.h +++ b/common/mavlink_msg_component_information.h @@ -201,7 +201,7 @@ static inline void mavlink_msg_component_information_send_struct(mavlink_channel #if MAVLINK_MSG_ID_COMPONENT_INFORMATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_control_system_state.h b/common/mavlink_msg_control_system_state.h index b4381cff..2e0d6b7a 100644 --- a/common/mavlink_msg_control_system_state.h +++ b/common/mavlink_msg_control_system_state.h @@ -346,7 +346,7 @@ static inline void mavlink_msg_control_system_state_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_CONTROL_SYSTEM_STATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_current_event_sequence.h b/common/mavlink_msg_current_event_sequence.h index ad112542..0c1ee1f4 100644 --- a/common/mavlink_msg_current_event_sequence.h +++ b/common/mavlink_msg_current_event_sequence.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_current_event_sequence_send_struct(mavlink_channe #if MAVLINK_MSG_ID_CURRENT_EVENT_SEQUENCE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_data_stream.h b/common/mavlink_msg_data_stream.h index 36b688cb..b8cd6985 100644 --- a/common/mavlink_msg_data_stream.h +++ b/common/mavlink_msg_data_stream.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_data_stream_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_DATA_STREAM_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_data_transmission_handshake.h b/common/mavlink_msg_data_transmission_handshake.h index 45fe6068..f6a383c1 100644 --- a/common/mavlink_msg_data_transmission_handshake.h +++ b/common/mavlink_msg_data_transmission_handshake.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_data_transmission_handshake_send_struct(mavlink_c #if MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_debug.h b/common/mavlink_msg_debug.h index 85814e36..57884d84 100644 --- a/common/mavlink_msg_debug.h +++ b/common/mavlink_msg_debug.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_debug_send_struct(mavlink_channel_t chan, const m #if MAVLINK_MSG_ID_DEBUG_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_debug_float_array.h b/common/mavlink_msg_debug_float_array.h index c3a8b31f..f18063e6 100644 --- a/common/mavlink_msg_debug_float_array.h +++ b/common/mavlink_msg_debug_float_array.h @@ -189,7 +189,7 @@ static inline void mavlink_msg_debug_float_array_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_DEBUG_FLOAT_ARRAY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_debug_vect.h b/common/mavlink_msg_debug_vect.h index 1cb8d77a..bef35f8c 100644 --- a/common/mavlink_msg_debug_vect.h +++ b/common/mavlink_msg_debug_vect.h @@ -200,7 +200,7 @@ static inline void mavlink_msg_debug_vect_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_DEBUG_VECT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_distance_sensor.h b/common/mavlink_msg_distance_sensor.h index 51d3ad0e..601257ca 100644 --- a/common/mavlink_msg_distance_sensor.h +++ b/common/mavlink_msg_distance_sensor.h @@ -284,7 +284,7 @@ static inline void mavlink_msg_distance_sensor_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_efi_status.h b/common/mavlink_msg_efi_status.h index d6310240..c279a287 100644 --- a/common/mavlink_msg_efi_status.h +++ b/common/mavlink_msg_efi_status.h @@ -350,7 +350,7 @@ static inline void mavlink_msg_efi_status_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_EFI_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_encapsulated_data.h b/common/mavlink_msg_encapsulated_data.h index bfcf511b..5f69c898 100644 --- a/common/mavlink_msg_encapsulated_data.h +++ b/common/mavlink_msg_encapsulated_data.h @@ -164,7 +164,7 @@ static inline void mavlink_msg_encapsulated_data_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_ENCAPSULATED_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_esc_info.h b/common/mavlink_msg_esc_info.h index 6b3295ae..ba1f2eb0 100644 --- a/common/mavlink_msg_esc_info.h +++ b/common/mavlink_msg_esc_info.h @@ -250,7 +250,7 @@ static inline void mavlink_msg_esc_info_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_ESC_INFO_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_esc_status.h b/common/mavlink_msg_esc_status.h index 3a5fefe2..4254cb72 100644 --- a/common/mavlink_msg_esc_status.h +++ b/common/mavlink_msg_esc_status.h @@ -202,7 +202,7 @@ static inline void mavlink_msg_esc_status_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_ESC_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_estimator_status.h b/common/mavlink_msg_estimator_status.h index bc5499b9..21ef9a67 100644 --- a/common/mavlink_msg_estimator_status.h +++ b/common/mavlink_msg_estimator_status.h @@ -266,7 +266,7 @@ static inline void mavlink_msg_estimator_status_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_ESTIMATOR_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_event.h b/common/mavlink_msg_event.h index ccafd1ff..7c419849 100644 --- a/common/mavlink_msg_event.h +++ b/common/mavlink_msg_event.h @@ -224,7 +224,7 @@ static inline void mavlink_msg_event_send_struct(mavlink_channel_t chan, const m #if MAVLINK_MSG_ID_EVENT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_extended_sys_state.h b/common/mavlink_msg_extended_sys_state.h index 2eeeed0c..e9bc9418 100644 --- a/common/mavlink_msg_extended_sys_state.h +++ b/common/mavlink_msg_extended_sys_state.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_extended_sys_state_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_EXTENDED_SYS_STATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_fence_status.h b/common/mavlink_msg_fence_status.h index 08ba1555..98b442aa 100644 --- a/common/mavlink_msg_fence_status.h +++ b/common/mavlink_msg_fence_status.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_fence_status_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_FENCE_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_file_transfer_protocol.h b/common/mavlink_msg_file_transfer_protocol.h index 0dd4d053..f8366ab4 100644 --- a/common/mavlink_msg_file_transfer_protocol.h +++ b/common/mavlink_msg_file_transfer_protocol.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_file_transfer_protocol_send_struct(mavlink_channe #if MAVLINK_MSG_ID_FILE_TRANSFER_PROTOCOL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_flight_information.h b/common/mavlink_msg_flight_information.h index 78513ff5..a0cd15c2 100644 --- a/common/mavlink_msg_flight_information.h +++ b/common/mavlink_msg_flight_information.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_flight_information_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_FLIGHT_INFORMATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_follow_target.h b/common/mavlink_msg_follow_target.h index 7f5cb1f2..1c854728 100644 --- a/common/mavlink_msg_follow_target.h +++ b/common/mavlink_msg_follow_target.h @@ -276,7 +276,7 @@ static inline void mavlink_msg_follow_target_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_FOLLOW_TARGET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_generator_status.h b/common/mavlink_msg_generator_status.h index ef960e13..a8e1a448 100644 --- a/common/mavlink_msg_generator_status.h +++ b/common/mavlink_msg_generator_status.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_generator_status_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_GENERATOR_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gimbal_device_attitude_status.h b/common/mavlink_msg_gimbal_device_attitude_status.h index 63275480..3ec61627 100644 --- a/common/mavlink_msg_gimbal_device_attitude_status.h +++ b/common/mavlink_msg_gimbal_device_attitude_status.h @@ -248,7 +248,7 @@ static inline void mavlink_msg_gimbal_device_attitude_status_send_struct(mavlink #if MAVLINK_MSG_ID_GIMBAL_DEVICE_ATTITUDE_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gimbal_device_information.h b/common/mavlink_msg_gimbal_device_information.h index 2f0c86bd..33cbf066 100644 --- a/common/mavlink_msg_gimbal_device_information.h +++ b/common/mavlink_msg_gimbal_device_information.h @@ -322,7 +322,7 @@ static inline void mavlink_msg_gimbal_device_information_send_struct(mavlink_cha #if MAVLINK_MSG_ID_GIMBAL_DEVICE_INFORMATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gimbal_device_set_attitude.h b/common/mavlink_msg_gimbal_device_set_attitude.h index 1cfda326..d4d9a1a4 100644 --- a/common/mavlink_msg_gimbal_device_set_attitude.h +++ b/common/mavlink_msg_gimbal_device_set_attitude.h @@ -224,7 +224,7 @@ static inline void mavlink_msg_gimbal_device_set_attitude_send_struct(mavlink_ch #if MAVLINK_MSG_ID_GIMBAL_DEVICE_SET_ATTITUDE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gimbal_manager_information.h b/common/mavlink_msg_gimbal_manager_information.h index 58c8c59d..29d37f4d 100644 --- a/common/mavlink_msg_gimbal_manager_information.h +++ b/common/mavlink_msg_gimbal_manager_information.h @@ -254,7 +254,7 @@ static inline void mavlink_msg_gimbal_manager_information_send_struct(mavlink_ch #if MAVLINK_MSG_ID_GIMBAL_MANAGER_INFORMATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gimbal_manager_set_attitude.h b/common/mavlink_msg_gimbal_manager_set_attitude.h index 828f1e6a..8ae53b27 100644 --- a/common/mavlink_msg_gimbal_manager_set_attitude.h +++ b/common/mavlink_msg_gimbal_manager_set_attitude.h @@ -236,7 +236,7 @@ static inline void mavlink_msg_gimbal_manager_set_attitude_send_struct(mavlink_c #if MAVLINK_MSG_ID_GIMBAL_MANAGER_SET_ATTITUDE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gimbal_manager_set_manual_control.h b/common/mavlink_msg_gimbal_manager_set_manual_control.h index d3096c49..bf4ac348 100644 --- a/common/mavlink_msg_gimbal_manager_set_manual_control.h +++ b/common/mavlink_msg_gimbal_manager_set_manual_control.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_gimbal_manager_set_manual_control_send_struct(mav #if MAVLINK_MSG_ID_GIMBAL_MANAGER_SET_MANUAL_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gimbal_manager_set_pitchyaw.h b/common/mavlink_msg_gimbal_manager_set_pitchyaw.h index de6a43b1..5972e913 100644 --- a/common/mavlink_msg_gimbal_manager_set_pitchyaw.h +++ b/common/mavlink_msg_gimbal_manager_set_pitchyaw.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_gimbal_manager_set_pitchyaw_send_struct(mavlink_c #if MAVLINK_MSG_ID_GIMBAL_MANAGER_SET_PITCHYAW_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gimbal_manager_status.h b/common/mavlink_msg_gimbal_manager_status.h index 4eace068..44777df3 100644 --- a/common/mavlink_msg_gimbal_manager_status.h +++ b/common/mavlink_msg_gimbal_manager_status.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_gimbal_manager_status_send_struct(mavlink_channel #if MAVLINK_MSG_ID_GIMBAL_MANAGER_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_global_position_int.h b/common/mavlink_msg_global_position_int.h index 8b601f23..e30d87dc 100644 --- a/common/mavlink_msg_global_position_int.h +++ b/common/mavlink_msg_global_position_int.h @@ -254,7 +254,7 @@ static inline void mavlink_msg_global_position_int_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_GLOBAL_POSITION_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_global_position_int_cov.h b/common/mavlink_msg_global_position_int_cov.h index 3cb44be7..89f4c646 100644 --- a/common/mavlink_msg_global_position_int_cov.h +++ b/common/mavlink_msg_global_position_int_cov.h @@ -260,7 +260,7 @@ static inline void mavlink_msg_global_position_int_cov_send_struct(mavlink_chann #if MAVLINK_MSG_ID_GLOBAL_POSITION_INT_COV_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_global_vision_position_estimate.h b/common/mavlink_msg_global_vision_position_estimate.h index 94a3d05d..b2dee2ec 100644 --- a/common/mavlink_msg_global_vision_position_estimate.h +++ b/common/mavlink_msg_global_vision_position_estimate.h @@ -248,7 +248,7 @@ static inline void mavlink_msg_global_vision_position_estimate_send_struct(mavli #if MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gps2_raw.h b/common/mavlink_msg_gps2_raw.h index ef7d408e..aa7bdfa0 100644 --- a/common/mavlink_msg_gps2_raw.h +++ b/common/mavlink_msg_gps2_raw.h @@ -362,7 +362,7 @@ static inline void mavlink_msg_gps2_raw_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_GPS2_RAW_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gps2_rtk.h b/common/mavlink_msg_gps2_rtk.h index 2af9b53c..e546c70e 100644 --- a/common/mavlink_msg_gps2_rtk.h +++ b/common/mavlink_msg_gps2_rtk.h @@ -302,7 +302,7 @@ static inline void mavlink_msg_gps2_rtk_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_GPS2_RTK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gps_global_origin.h b/common/mavlink_msg_gps_global_origin.h index ccbde8fd..c9a67774 100644 --- a/common/mavlink_msg_gps_global_origin.h +++ b/common/mavlink_msg_gps_global_origin.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_gps_global_origin_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gps_inject_data.h b/common/mavlink_msg_gps_inject_data.h index ff6dc0ee..9b224267 100644 --- a/common/mavlink_msg_gps_inject_data.h +++ b/common/mavlink_msg_gps_inject_data.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_gps_inject_data_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_GPS_INJECT_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gps_input.h b/common/mavlink_msg_gps_input.h index de76ddbf..6e920f21 100644 --- a/common/mavlink_msg_gps_input.h +++ b/common/mavlink_msg_gps_input.h @@ -374,7 +374,7 @@ static inline void mavlink_msg_gps_input_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_GPS_INPUT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gps_raw_int.h b/common/mavlink_msg_gps_raw_int.h index 68b8e251..5fdbef07 100644 --- a/common/mavlink_msg_gps_raw_int.h +++ b/common/mavlink_msg_gps_raw_int.h @@ -338,7 +338,7 @@ static inline void mavlink_msg_gps_raw_int_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_GPS_RAW_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gps_rtcm_data.h b/common/mavlink_msg_gps_rtcm_data.h index 393d6adb..a6f861ee 100644 --- a/common/mavlink_msg_gps_rtcm_data.h +++ b/common/mavlink_msg_gps_rtcm_data.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_gps_rtcm_data_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_GPS_RTCM_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gps_rtk.h b/common/mavlink_msg_gps_rtk.h index abf898f2..538b0db9 100644 --- a/common/mavlink_msg_gps_rtk.h +++ b/common/mavlink_msg_gps_rtk.h @@ -302,7 +302,7 @@ static inline void mavlink_msg_gps_rtk_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_GPS_RTK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_gps_status.h b/common/mavlink_msg_gps_status.h index cedd5458..65273a5c 100644 --- a/common/mavlink_msg_gps_status.h +++ b/common/mavlink_msg_gps_status.h @@ -216,7 +216,7 @@ static inline void mavlink_msg_gps_status_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_GPS_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_high_latency.h b/common/mavlink_msg_high_latency.h index f2ff8bfd..29ae264d 100644 --- a/common/mavlink_msg_high_latency.h +++ b/common/mavlink_msg_high_latency.h @@ -434,7 +434,7 @@ static inline void mavlink_msg_high_latency_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_HIGH_LATENCY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_high_latency2.h b/common/mavlink_msg_high_latency2.h index 3de15a71..39d24306 100644 --- a/common/mavlink_msg_high_latency2.h +++ b/common/mavlink_msg_high_latency2.h @@ -470,7 +470,7 @@ static inline void mavlink_msg_high_latency2_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_HIGH_LATENCY2_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_highres_imu.h b/common/mavlink_msg_highres_imu.h index 4ecec6f6..0e34c9be 100644 --- a/common/mavlink_msg_highres_imu.h +++ b/common/mavlink_msg_highres_imu.h @@ -338,7 +338,7 @@ static inline void mavlink_msg_highres_imu_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_HIGHRES_IMU_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_hil_actuator_controls.h b/common/mavlink_msg_hil_actuator_controls.h index 31c28db4..65f55821 100644 --- a/common/mavlink_msg_hil_actuator_controls.h +++ b/common/mavlink_msg_hil_actuator_controls.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_hil_actuator_controls_send_struct(mavlink_channel #if MAVLINK_MSG_ID_HIL_ACTUATOR_CONTROLS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_hil_controls.h b/common/mavlink_msg_hil_controls.h index a3bd993b..8fc1c411 100644 --- a/common/mavlink_msg_hil_controls.h +++ b/common/mavlink_msg_hil_controls.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_hil_controls_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_HIL_CONTROLS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_hil_gps.h b/common/mavlink_msg_hil_gps.h index 18e83309..aa198380 100644 --- a/common/mavlink_msg_hil_gps.h +++ b/common/mavlink_msg_hil_gps.h @@ -326,7 +326,7 @@ static inline void mavlink_msg_hil_gps_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_HIL_GPS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_hil_optical_flow.h b/common/mavlink_msg_hil_optical_flow.h index 98c61fd5..de0ec247 100644 --- a/common/mavlink_msg_hil_optical_flow.h +++ b/common/mavlink_msg_hil_optical_flow.h @@ -290,7 +290,7 @@ static inline void mavlink_msg_hil_optical_flow_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_HIL_OPTICAL_FLOW_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_hil_rc_inputs_raw.h b/common/mavlink_msg_hil_rc_inputs_raw.h index b7c9cfe5..78cad3fd 100644 --- a/common/mavlink_msg_hil_rc_inputs_raw.h +++ b/common/mavlink_msg_hil_rc_inputs_raw.h @@ -314,7 +314,7 @@ static inline void mavlink_msg_hil_rc_inputs_raw_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_hil_sensor.h b/common/mavlink_msg_hil_sensor.h index 9832edde..28c10c7e 100644 --- a/common/mavlink_msg_hil_sensor.h +++ b/common/mavlink_msg_hil_sensor.h @@ -338,7 +338,7 @@ static inline void mavlink_msg_hil_sensor_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_HIL_SENSOR_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_hil_state.h b/common/mavlink_msg_hil_state.h index e5c4ed80..4766c920 100644 --- a/common/mavlink_msg_hil_state.h +++ b/common/mavlink_msg_hil_state.h @@ -338,7 +338,7 @@ static inline void mavlink_msg_hil_state_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_HIL_STATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_hil_state_quaternion.h b/common/mavlink_msg_hil_state_quaternion.h index a605f39f..856603c5 100644 --- a/common/mavlink_msg_hil_state_quaternion.h +++ b/common/mavlink_msg_hil_state_quaternion.h @@ -332,7 +332,7 @@ static inline void mavlink_msg_hil_state_quaternion_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_HIL_STATE_QUATERNION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_home_position.h b/common/mavlink_msg_home_position.h index ab5130b8..a4d0b130 100644 --- a/common/mavlink_msg_home_position.h +++ b/common/mavlink_msg_home_position.h @@ -272,7 +272,7 @@ static inline void mavlink_msg_home_position_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_HOME_POSITION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_hygrometer_sensor.h b/common/mavlink_msg_hygrometer_sensor.h index 9c224a4a..0ae784ff 100644 --- a/common/mavlink_msg_hygrometer_sensor.h +++ b/common/mavlink_msg_hygrometer_sensor.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_hygrometer_sensor_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_HYGROMETER_SENSOR_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_isbd_link_status.h b/common/mavlink_msg_isbd_link_status.h index a0c53745..7273e11a 100644 --- a/common/mavlink_msg_isbd_link_status.h +++ b/common/mavlink_msg_isbd_link_status.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_isbd_link_status_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_landing_target.h b/common/mavlink_msg_landing_target.h index 1d1b41ed..1de2d9ef 100644 --- a/common/mavlink_msg_landing_target.h +++ b/common/mavlink_msg_landing_target.h @@ -308,7 +308,7 @@ static inline void mavlink_msg_landing_target_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_LANDING_TARGET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_link_node_status.h b/common/mavlink_msg_link_node_status.h index 8da7b71d..927118f8 100644 --- a/common/mavlink_msg_link_node_status.h +++ b/common/mavlink_msg_link_node_status.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_link_node_status_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_LINK_NODE_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_local_position_ned.h b/common/mavlink_msg_local_position_ned.h index 48c71d90..a84fca84 100644 --- a/common/mavlink_msg_local_position_ned.h +++ b/common/mavlink_msg_local_position_ned.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_local_position_ned_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_LOCAL_POSITION_NED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_local_position_ned_cov.h b/common/mavlink_msg_local_position_ned_cov.h index 8497c7d0..b7eeba49 100644 --- a/common/mavlink_msg_local_position_ned_cov.h +++ b/common/mavlink_msg_local_position_ned_cov.h @@ -284,7 +284,7 @@ static inline void mavlink_msg_local_position_ned_cov_send_struct(mavlink_channe #if MAVLINK_MSG_ID_LOCAL_POSITION_NED_COV_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_local_position_ned_system_global_offset.h b/common/mavlink_msg_local_position_ned_system_global_offset.h index 8ff2ba65..30fbab19 100644 --- a/common/mavlink_msg_local_position_ned_system_global_offset.h +++ b/common/mavlink_msg_local_position_ned_system_global_offset.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_local_position_ned_system_global_offset_send_stru #if MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_log_data.h b/common/mavlink_msg_log_data.h index 37cd7777..6f879cd2 100644 --- a/common/mavlink_msg_log_data.h +++ b/common/mavlink_msg_log_data.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_log_data_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_LOG_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_log_entry.h b/common/mavlink_msg_log_entry.h index 3020dc74..6fb0048a 100644 --- a/common/mavlink_msg_log_entry.h +++ b/common/mavlink_msg_log_entry.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_log_entry_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_LOG_ENTRY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_log_erase.h b/common/mavlink_msg_log_erase.h index c3e4263e..1dec9e29 100644 --- a/common/mavlink_msg_log_erase.h +++ b/common/mavlink_msg_log_erase.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_log_erase_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_LOG_ERASE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_log_request_data.h b/common/mavlink_msg_log_request_data.h index 521b8522..6cc0cfb7 100644 --- a/common/mavlink_msg_log_request_data.h +++ b/common/mavlink_msg_log_request_data.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_log_request_data_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_LOG_REQUEST_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_log_request_end.h b/common/mavlink_msg_log_request_end.h index a2a7fe36..387a7c09 100644 --- a/common/mavlink_msg_log_request_end.h +++ b/common/mavlink_msg_log_request_end.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_log_request_end_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_LOG_REQUEST_END_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_log_request_list.h b/common/mavlink_msg_log_request_list.h index 4a6dfaa4..de193356 100644 --- a/common/mavlink_msg_log_request_list.h +++ b/common/mavlink_msg_log_request_list.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_log_request_list_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_LOG_REQUEST_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_logging_ack.h b/common/mavlink_msg_logging_ack.h index 56dab387..66471061 100644 --- a/common/mavlink_msg_logging_ack.h +++ b/common/mavlink_msg_logging_ack.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_logging_ack_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_LOGGING_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_logging_data.h b/common/mavlink_msg_logging_data.h index 782546c4..fa2fa235 100644 --- a/common/mavlink_msg_logging_data.h +++ b/common/mavlink_msg_logging_data.h @@ -212,7 +212,7 @@ static inline void mavlink_msg_logging_data_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_LOGGING_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_logging_data_acked.h b/common/mavlink_msg_logging_data_acked.h index 5e222e5a..15618d5b 100644 --- a/common/mavlink_msg_logging_data_acked.h +++ b/common/mavlink_msg_logging_data_acked.h @@ -212,7 +212,7 @@ static inline void mavlink_msg_logging_data_acked_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_LOGGING_DATA_ACKED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mag_cal_report.h b/common/mavlink_msg_mag_cal_report.h index 6694501e..43e0a750 100644 --- a/common/mavlink_msg_mag_cal_report.h +++ b/common/mavlink_msg_mag_cal_report.h @@ -362,7 +362,7 @@ static inline void mavlink_msg_mag_cal_report_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_MAG_CAL_REPORT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_manual_control.h b/common/mavlink_msg_manual_control.h index 91b0c721..44554285 100644 --- a/common/mavlink_msg_manual_control.h +++ b/common/mavlink_msg_manual_control.h @@ -266,7 +266,7 @@ static inline void mavlink_msg_manual_control_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_MANUAL_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_manual_setpoint.h b/common/mavlink_msg_manual_setpoint.h index 4bc42b14..09e5041c 100644 --- a/common/mavlink_msg_manual_setpoint.h +++ b/common/mavlink_msg_manual_setpoint.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_manual_setpoint_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_MANUAL_SETPOINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_memory_vect.h b/common/mavlink_msg_memory_vect.h index c3315474..61a73862 100644 --- a/common/mavlink_msg_memory_vect.h +++ b/common/mavlink_msg_memory_vect.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_memory_vect_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_MEMORY_VECT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_message_interval.h b/common/mavlink_msg_message_interval.h index a6a52b1f..5a94a182 100644 --- a/common/mavlink_msg_message_interval.h +++ b/common/mavlink_msg_message_interval.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_message_interval_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_ack.h b/common/mavlink_msg_mission_ack.h index 916b94d3..13683c8b 100644 --- a/common/mavlink_msg_mission_ack.h +++ b/common/mavlink_msg_mission_ack.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_mission_ack_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_MISSION_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_clear_all.h b/common/mavlink_msg_mission_clear_all.h index 1e585f9f..724ea126 100644 --- a/common/mavlink_msg_mission_clear_all.h +++ b/common/mavlink_msg_mission_clear_all.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_mission_clear_all_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_MISSION_CLEAR_ALL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_count.h b/common/mavlink_msg_mission_count.h index 53afd490..b237e8fd 100644 --- a/common/mavlink_msg_mission_count.h +++ b/common/mavlink_msg_mission_count.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_mission_count_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_MISSION_COUNT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_current.h b/common/mavlink_msg_mission_current.h index 13f0fb62..0b2d8960 100644 --- a/common/mavlink_msg_mission_current.h +++ b/common/mavlink_msg_mission_current.h @@ -158,7 +158,7 @@ static inline void mavlink_msg_mission_current_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_MISSION_CURRENT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_item.h b/common/mavlink_msg_mission_item.h index b14d151b..96bbd26a 100644 --- a/common/mavlink_msg_mission_item.h +++ b/common/mavlink_msg_mission_item.h @@ -326,7 +326,7 @@ static inline void mavlink_msg_mission_item_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_MISSION_ITEM_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_item_int.h b/common/mavlink_msg_mission_item_int.h index 74ad3a5e..a1aed145 100644 --- a/common/mavlink_msg_mission_item_int.h +++ b/common/mavlink_msg_mission_item_int.h @@ -326,7 +326,7 @@ static inline void mavlink_msg_mission_item_int_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_MISSION_ITEM_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_item_reached.h b/common/mavlink_msg_mission_item_reached.h index 647176b9..fbc195db 100644 --- a/common/mavlink_msg_mission_item_reached.h +++ b/common/mavlink_msg_mission_item_reached.h @@ -158,7 +158,7 @@ static inline void mavlink_msg_mission_item_reached_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_MISSION_ITEM_REACHED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_request.h b/common/mavlink_msg_mission_request.h index 4f8c0fe7..a2770a1e 100644 --- a/common/mavlink_msg_mission_request.h +++ b/common/mavlink_msg_mission_request.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_mission_request_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_MISSION_REQUEST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_request_int.h b/common/mavlink_msg_mission_request_int.h index c131f78f..a81e3196 100644 --- a/common/mavlink_msg_mission_request_int.h +++ b/common/mavlink_msg_mission_request_int.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_mission_request_int_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_MISSION_REQUEST_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_request_list.h b/common/mavlink_msg_mission_request_list.h index a1633f43..2e70c224 100644 --- a/common/mavlink_msg_mission_request_list.h +++ b/common/mavlink_msg_mission_request_list.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_mission_request_list_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_MISSION_REQUEST_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_request_partial_list.h b/common/mavlink_msg_mission_request_partial_list.h index 93906934..8612b956 100644 --- a/common/mavlink_msg_mission_request_partial_list.h +++ b/common/mavlink_msg_mission_request_partial_list.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_mission_request_partial_list_send_struct(mavlink_ #if MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_set_current.h b/common/mavlink_msg_mission_set_current.h index 41eeba3f..225fd2d9 100644 --- a/common/mavlink_msg_mission_set_current.h +++ b/common/mavlink_msg_mission_set_current.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_mission_set_current_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_MISSION_SET_CURRENT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mission_write_partial_list.h b/common/mavlink_msg_mission_write_partial_list.h index 9f8bd08f..e6705f60 100644 --- a/common/mavlink_msg_mission_write_partial_list.h +++ b/common/mavlink_msg_mission_write_partial_list.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_mission_write_partial_list_send_struct(mavlink_ch #if MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_mount_orientation.h b/common/mavlink_msg_mount_orientation.h index 96bfda25..820f4529 100644 --- a/common/mavlink_msg_mount_orientation.h +++ b/common/mavlink_msg_mount_orientation.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_mount_orientation_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_MOUNT_ORIENTATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_named_value_float.h b/common/mavlink_msg_named_value_float.h index ac3e8382..fe75e782 100644 --- a/common/mavlink_msg_named_value_float.h +++ b/common/mavlink_msg_named_value_float.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_named_value_float_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_NAMED_VALUE_FLOAT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_named_value_int.h b/common/mavlink_msg_named_value_int.h index 32dbdc91..f33d7f4d 100644 --- a/common/mavlink_msg_named_value_int.h +++ b/common/mavlink_msg_named_value_int.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_named_value_int_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_NAMED_VALUE_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_nav_controller_output.h b/common/mavlink_msg_nav_controller_output.h index 2d9e8c0c..1e29b77d 100644 --- a/common/mavlink_msg_nav_controller_output.h +++ b/common/mavlink_msg_nav_controller_output.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_nav_controller_output_send_struct(mavlink_channel #if MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_obstacle_distance.h b/common/mavlink_msg_obstacle_distance.h index 641f2627..afc25f14 100644 --- a/common/mavlink_msg_obstacle_distance.h +++ b/common/mavlink_msg_obstacle_distance.h @@ -248,7 +248,7 @@ static inline void mavlink_msg_obstacle_distance_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_OBSTACLE_DISTANCE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_odometry.h b/common/mavlink_msg_odometry.h index 93869b79..37aadf46 100644 --- a/common/mavlink_msg_odometry.h +++ b/common/mavlink_msg_odometry.h @@ -346,7 +346,7 @@ static inline void mavlink_msg_odometry_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_ODOMETRY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_onboard_computer_status.h b/common/mavlink_msg_onboard_computer_status.h index 6da25814..55bb396f 100644 --- a/common/mavlink_msg_onboard_computer_status.h +++ b/common/mavlink_msg_onboard_computer_status.h @@ -393,7 +393,7 @@ static inline void mavlink_msg_onboard_computer_status_send_struct(mavlink_chann #if MAVLINK_MSG_ID_ONBOARD_COMPUTER_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_open_drone_id_authentication.h b/common/mavlink_msg_open_drone_id_authentication.h index 7373c85d..4c5fc3a0 100644 --- a/common/mavlink_msg_open_drone_id_authentication.h +++ b/common/mavlink_msg_open_drone_id_authentication.h @@ -249,7 +249,7 @@ static inline void mavlink_msg_open_drone_id_authentication_send_struct(mavlink_ #if MAVLINK_MSG_ID_OPEN_DRONE_ID_AUTHENTICATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_open_drone_id_basic_id.h b/common/mavlink_msg_open_drone_id_basic_id.h index 1102960b..e2231451 100644 --- a/common/mavlink_msg_open_drone_id_basic_id.h +++ b/common/mavlink_msg_open_drone_id_basic_id.h @@ -213,7 +213,7 @@ static inline void mavlink_msg_open_drone_id_basic_id_send_struct(mavlink_channe #if MAVLINK_MSG_ID_OPEN_DRONE_ID_BASIC_ID_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_open_drone_id_location.h b/common/mavlink_msg_open_drone_id_location.h index 178efa74..c0fd46cf 100644 --- a/common/mavlink_msg_open_drone_id_location.h +++ b/common/mavlink_msg_open_drone_id_location.h @@ -368,7 +368,7 @@ static inline void mavlink_msg_open_drone_id_location_send_struct(mavlink_channe #if MAVLINK_MSG_ID_OPEN_DRONE_ID_LOCATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_open_drone_id_message_pack.h b/common/mavlink_msg_open_drone_id_message_pack.h index b9e2a497..b53ff1a1 100644 --- a/common/mavlink_msg_open_drone_id_message_pack.h +++ b/common/mavlink_msg_open_drone_id_message_pack.h @@ -213,7 +213,7 @@ static inline void mavlink_msg_open_drone_id_message_pack_send_struct(mavlink_ch #if MAVLINK_MSG_ID_OPEN_DRONE_ID_MESSAGE_PACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_open_drone_id_operator_id.h b/common/mavlink_msg_open_drone_id_operator_id.h index f3bf5aff..ba72d2b0 100644 --- a/common/mavlink_msg_open_drone_id_operator_id.h +++ b/common/mavlink_msg_open_drone_id_operator_id.h @@ -201,7 +201,7 @@ static inline void mavlink_msg_open_drone_id_operator_id_send_struct(mavlink_cha #if MAVLINK_MSG_ID_OPEN_DRONE_ID_OPERATOR_ID_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_open_drone_id_self_id.h b/common/mavlink_msg_open_drone_id_self_id.h index 0750472a..fbc787a0 100644 --- a/common/mavlink_msg_open_drone_id_self_id.h +++ b/common/mavlink_msg_open_drone_id_self_id.h @@ -201,7 +201,7 @@ static inline void mavlink_msg_open_drone_id_self_id_send_struct(mavlink_channel #if MAVLINK_MSG_ID_OPEN_DRONE_ID_SELF_ID_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_open_drone_id_system.h b/common/mavlink_msg_open_drone_id_system.h index 807f334e..b26b6854 100644 --- a/common/mavlink_msg_open_drone_id_system.h +++ b/common/mavlink_msg_open_drone_id_system.h @@ -308,7 +308,7 @@ static inline void mavlink_msg_open_drone_id_system_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_OPEN_DRONE_ID_SYSTEM_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_optical_flow.h b/common/mavlink_msg_optical_flow.h index 25c88864..0c414a84 100644 --- a/common/mavlink_msg_optical_flow.h +++ b/common/mavlink_msg_optical_flow.h @@ -266,7 +266,7 @@ static inline void mavlink_msg_optical_flow_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_OPTICAL_FLOW_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_optical_flow_rad.h b/common/mavlink_msg_optical_flow_rad.h index 593533bf..a8065dce 100644 --- a/common/mavlink_msg_optical_flow_rad.h +++ b/common/mavlink_msg_optical_flow_rad.h @@ -290,7 +290,7 @@ static inline void mavlink_msg_optical_flow_rad_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_OPTICAL_FLOW_RAD_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_orbit_execution_status.h b/common/mavlink_msg_orbit_execution_status.h index 29e2915a..d5d9f3b1 100644 --- a/common/mavlink_msg_orbit_execution_status.h +++ b/common/mavlink_msg_orbit_execution_status.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_orbit_execution_status_send_struct(mavlink_channe #if MAVLINK_MSG_ID_ORBIT_EXECUTION_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_ext_ack.h b/common/mavlink_msg_param_ext_ack.h index 3a560d2b..e3da02b5 100644 --- a/common/mavlink_msg_param_ext_ack.h +++ b/common/mavlink_msg_param_ext_ack.h @@ -189,7 +189,7 @@ static inline void mavlink_msg_param_ext_ack_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_PARAM_EXT_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_ext_request_list.h b/common/mavlink_msg_param_ext_request_list.h index a3983dfb..945fd0c3 100644 --- a/common/mavlink_msg_param_ext_request_list.h +++ b/common/mavlink_msg_param_ext_request_list.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_param_ext_request_list_send_struct(mavlink_channe #if MAVLINK_MSG_ID_PARAM_EXT_REQUEST_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_ext_request_read.h b/common/mavlink_msg_param_ext_request_read.h index 974f6856..3c18f63d 100644 --- a/common/mavlink_msg_param_ext_request_read.h +++ b/common/mavlink_msg_param_ext_request_read.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_param_ext_request_read_send_struct(mavlink_channe #if MAVLINK_MSG_ID_PARAM_EXT_REQUEST_READ_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_ext_set.h b/common/mavlink_msg_param_ext_set.h index bb4c7ccf..c17e0a32 100644 --- a/common/mavlink_msg_param_ext_set.h +++ b/common/mavlink_msg_param_ext_set.h @@ -201,7 +201,7 @@ static inline void mavlink_msg_param_ext_set_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_PARAM_EXT_SET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_ext_value.h b/common/mavlink_msg_param_ext_value.h index 1bf131c3..e9384f0b 100644 --- a/common/mavlink_msg_param_ext_value.h +++ b/common/mavlink_msg_param_ext_value.h @@ -201,7 +201,7 @@ static inline void mavlink_msg_param_ext_value_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_PARAM_EXT_VALUE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_map_rc.h b/common/mavlink_msg_param_map_rc.h index 5bea16c7..46fcaa19 100644 --- a/common/mavlink_msg_param_map_rc.h +++ b/common/mavlink_msg_param_map_rc.h @@ -248,7 +248,7 @@ static inline void mavlink_msg_param_map_rc_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_PARAM_MAP_RC_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_request_list.h b/common/mavlink_msg_param_request_list.h index e8ad2157..7ccfc87b 100644 --- a/common/mavlink_msg_param_request_list.h +++ b/common/mavlink_msg_param_request_list.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_param_request_list_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_PARAM_REQUEST_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_request_read.h b/common/mavlink_msg_param_request_read.h index 92a3e866..fa71a491 100644 --- a/common/mavlink_msg_param_request_read.h +++ b/common/mavlink_msg_param_request_read.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_param_request_read_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_PARAM_REQUEST_READ_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_set.h b/common/mavlink_msg_param_set.h index 72039bca..36a2bd43 100644 --- a/common/mavlink_msg_param_set.h +++ b/common/mavlink_msg_param_set.h @@ -200,7 +200,7 @@ static inline void mavlink_msg_param_set_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_PARAM_SET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_param_value.h b/common/mavlink_msg_param_value.h index e487917c..58bf4c53 100644 --- a/common/mavlink_msg_param_value.h +++ b/common/mavlink_msg_param_value.h @@ -200,7 +200,7 @@ static inline void mavlink_msg_param_value_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_PARAM_VALUE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_ping.h b/common/mavlink_msg_ping.h index 1e5508d4..e91a9b29 100644 --- a/common/mavlink_msg_ping.h +++ b/common/mavlink_msg_ping.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_ping_send_struct(mavlink_channel_t chan, const ma #if MAVLINK_MSG_ID_PING_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_play_tune.h b/common/mavlink_msg_play_tune.h index c318448e..dac305ec 100644 --- a/common/mavlink_msg_play_tune.h +++ b/common/mavlink_msg_play_tune.h @@ -189,7 +189,7 @@ static inline void mavlink_msg_play_tune_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_PLAY_TUNE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_play_tune_v2.h b/common/mavlink_msg_play_tune_v2.h index c47d6e6a..f71da0aa 100644 --- a/common/mavlink_msg_play_tune_v2.h +++ b/common/mavlink_msg_play_tune_v2.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_play_tune_v2_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_PLAY_TUNE_V2_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_position_target_global_int.h b/common/mavlink_msg_position_target_global_int.h index 93386fab..bb619b50 100644 --- a/common/mavlink_msg_position_target_global_int.h +++ b/common/mavlink_msg_position_target_global_int.h @@ -314,7 +314,7 @@ static inline void mavlink_msg_position_target_global_int_send_struct(mavlink_ch #if MAVLINK_MSG_ID_POSITION_TARGET_GLOBAL_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_position_target_local_ned.h b/common/mavlink_msg_position_target_local_ned.h index f3cfde26..6aa98aee 100644 --- a/common/mavlink_msg_position_target_local_ned.h +++ b/common/mavlink_msg_position_target_local_ned.h @@ -314,7 +314,7 @@ static inline void mavlink_msg_position_target_local_ned_send_struct(mavlink_cha #if MAVLINK_MSG_ID_POSITION_TARGET_LOCAL_NED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_power_status.h b/common/mavlink_msg_power_status.h index 67567680..a3cd2fe6 100644 --- a/common/mavlink_msg_power_status.h +++ b/common/mavlink_msg_power_status.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_power_status_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_POWER_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_radio_status.h b/common/mavlink_msg_radio_status.h index db0c6b14..ecd74834 100644 --- a/common/mavlink_msg_radio_status.h +++ b/common/mavlink_msg_radio_status.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_radio_status_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_RADIO_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_raw_imu.h b/common/mavlink_msg_raw_imu.h index eeb4eacb..f80b8012 100644 --- a/common/mavlink_msg_raw_imu.h +++ b/common/mavlink_msg_raw_imu.h @@ -290,7 +290,7 @@ static inline void mavlink_msg_raw_imu_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_RAW_IMU_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_raw_pressure.h b/common/mavlink_msg_raw_pressure.h index 9b80a848..b0f49dc9 100644 --- a/common/mavlink_msg_raw_pressure.h +++ b/common/mavlink_msg_raw_pressure.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_raw_pressure_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_RAW_PRESSURE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_raw_rpm.h b/common/mavlink_msg_raw_rpm.h index 0fa4f1a0..e34cdbf7 100644 --- a/common/mavlink_msg_raw_rpm.h +++ b/common/mavlink_msg_raw_rpm.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_raw_rpm_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_RAW_RPM_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_rc_channels.h b/common/mavlink_msg_rc_channels.h index dd5d5f16..721bc65e 100644 --- a/common/mavlink_msg_rc_channels.h +++ b/common/mavlink_msg_rc_channels.h @@ -398,7 +398,7 @@ static inline void mavlink_msg_rc_channels_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_RC_CHANNELS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_rc_channels_override.h b/common/mavlink_msg_rc_channels_override.h index a0d2a767..bc973c91 100644 --- a/common/mavlink_msg_rc_channels_override.h +++ b/common/mavlink_msg_rc_channels_override.h @@ -386,7 +386,7 @@ static inline void mavlink_msg_rc_channels_override_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_rc_channels_raw.h b/common/mavlink_msg_rc_channels_raw.h index 011ad67c..af768381 100644 --- a/common/mavlink_msg_rc_channels_raw.h +++ b/common/mavlink_msg_rc_channels_raw.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_rc_channels_raw_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_RC_CHANNELS_RAW_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_rc_channels_scaled.h b/common/mavlink_msg_rc_channels_scaled.h index b9e20c26..bc5dea78 100644 --- a/common/mavlink_msg_rc_channels_scaled.h +++ b/common/mavlink_msg_rc_channels_scaled.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_rc_channels_scaled_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_RC_CHANNELS_SCALED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_request_data_stream.h b/common/mavlink_msg_request_data_stream.h index f1d73958..617d61c6 100644 --- a/common/mavlink_msg_request_data_stream.h +++ b/common/mavlink_msg_request_data_stream.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_request_data_stream_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_REQUEST_DATA_STREAM_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_request_event.h b/common/mavlink_msg_request_event.h index 6ed06344..dcf15917 100644 --- a/common/mavlink_msg_request_event.h +++ b/common/mavlink_msg_request_event.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_request_event_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_REQUEST_EVENT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_resource_request.h b/common/mavlink_msg_resource_request.h index a8ee9a63..31c07f1a 100644 --- a/common/mavlink_msg_resource_request.h +++ b/common/mavlink_msg_resource_request.h @@ -201,7 +201,7 @@ static inline void mavlink_msg_resource_request_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_RESOURCE_REQUEST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_response_event_error.h b/common/mavlink_msg_response_event_error.h index 597968cb..9b665a23 100644 --- a/common/mavlink_msg_response_event_error.h +++ b/common/mavlink_msg_response_event_error.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_response_event_error_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_RESPONSE_EVENT_ERROR_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_safety_allowed_area.h b/common/mavlink_msg_safety_allowed_area.h index bad669a0..66b5c461 100644 --- a/common/mavlink_msg_safety_allowed_area.h +++ b/common/mavlink_msg_safety_allowed_area.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_safety_allowed_area_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_safety_set_allowed_area.h b/common/mavlink_msg_safety_set_allowed_area.h index eca9b274..d50ac5cb 100644 --- a/common/mavlink_msg_safety_set_allowed_area.h +++ b/common/mavlink_msg_safety_set_allowed_area.h @@ -254,7 +254,7 @@ static inline void mavlink_msg_safety_set_allowed_area_send_struct(mavlink_chann #if MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_scaled_imu.h b/common/mavlink_msg_scaled_imu.h index 14b1257c..fac086f6 100644 --- a/common/mavlink_msg_scaled_imu.h +++ b/common/mavlink_msg_scaled_imu.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_scaled_imu_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_SCALED_IMU_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_scaled_imu2.h b/common/mavlink_msg_scaled_imu2.h index 2106cefd..508fdff7 100644 --- a/common/mavlink_msg_scaled_imu2.h +++ b/common/mavlink_msg_scaled_imu2.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_scaled_imu2_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_SCALED_IMU2_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_scaled_imu3.h b/common/mavlink_msg_scaled_imu3.h index cd20f235..cbacc699 100644 --- a/common/mavlink_msg_scaled_imu3.h +++ b/common/mavlink_msg_scaled_imu3.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_scaled_imu3_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_SCALED_IMU3_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_scaled_pressure.h b/common/mavlink_msg_scaled_pressure.h index 13344a8a..fedaeed9 100644 --- a/common/mavlink_msg_scaled_pressure.h +++ b/common/mavlink_msg_scaled_pressure.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_scaled_pressure_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_SCALED_PRESSURE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_scaled_pressure2.h b/common/mavlink_msg_scaled_pressure2.h index 8dc28850..3c4a0f5a 100644 --- a/common/mavlink_msg_scaled_pressure2.h +++ b/common/mavlink_msg_scaled_pressure2.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_scaled_pressure2_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_SCALED_PRESSURE2_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_scaled_pressure3.h b/common/mavlink_msg_scaled_pressure3.h index 34368b1e..5c5e9737 100644 --- a/common/mavlink_msg_scaled_pressure3.h +++ b/common/mavlink_msg_scaled_pressure3.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_scaled_pressure3_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_SCALED_PRESSURE3_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_serial_control.h b/common/mavlink_msg_serial_control.h index 55700f8a..64b190af 100644 --- a/common/mavlink_msg_serial_control.h +++ b/common/mavlink_msg_serial_control.h @@ -236,7 +236,7 @@ static inline void mavlink_msg_serial_control_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_SERIAL_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_servo_output_raw.h b/common/mavlink_msg_servo_output_raw.h index 4b76d20a..d1a5bb65 100644 --- a/common/mavlink_msg_servo_output_raw.h +++ b/common/mavlink_msg_servo_output_raw.h @@ -362,7 +362,7 @@ static inline void mavlink_msg_servo_output_raw_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_SERVO_OUTPUT_RAW_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_set_actuator_control_target.h b/common/mavlink_msg_set_actuator_control_target.h index 7d21dac9..b9ea8fcb 100644 --- a/common/mavlink_msg_set_actuator_control_target.h +++ b/common/mavlink_msg_set_actuator_control_target.h @@ -200,7 +200,7 @@ static inline void mavlink_msg_set_actuator_control_target_send_struct(mavlink_c #if MAVLINK_MSG_ID_SET_ACTUATOR_CONTROL_TARGET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_set_attitude_target.h b/common/mavlink_msg_set_attitude_target.h index 05ed35d7..ddf98679 100644 --- a/common/mavlink_msg_set_attitude_target.h +++ b/common/mavlink_msg_set_attitude_target.h @@ -261,7 +261,7 @@ static inline void mavlink_msg_set_attitude_target_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_SET_ATTITUDE_TARGET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_set_gps_global_origin.h b/common/mavlink_msg_set_gps_global_origin.h index 62a2f448..88ab89b8 100644 --- a/common/mavlink_msg_set_gps_global_origin.h +++ b/common/mavlink_msg_set_gps_global_origin.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_set_gps_global_origin_send_struct(mavlink_channel #if MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_set_home_position.h b/common/mavlink_msg_set_home_position.h index ea7d2d0f..50643cc3 100644 --- a/common/mavlink_msg_set_home_position.h +++ b/common/mavlink_msg_set_home_position.h @@ -284,7 +284,7 @@ static inline void mavlink_msg_set_home_position_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_SET_HOME_POSITION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_set_mode.h b/common/mavlink_msg_set_mode.h index d2d08745..14509122 100644 --- a/common/mavlink_msg_set_mode.h +++ b/common/mavlink_msg_set_mode.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_set_mode_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_SET_MODE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_set_position_target_global_int.h b/common/mavlink_msg_set_position_target_global_int.h index 3a152307..0c314cab 100644 --- a/common/mavlink_msg_set_position_target_global_int.h +++ b/common/mavlink_msg_set_position_target_global_int.h @@ -338,7 +338,7 @@ static inline void mavlink_msg_set_position_target_global_int_send_struct(mavlin #if MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_set_position_target_local_ned.h b/common/mavlink_msg_set_position_target_local_ned.h index 4e16b2ab..646bda57 100644 --- a/common/mavlink_msg_set_position_target_local_ned.h +++ b/common/mavlink_msg_set_position_target_local_ned.h @@ -338,7 +338,7 @@ static inline void mavlink_msg_set_position_target_local_ned_send_struct(mavlink #if MAVLINK_MSG_ID_SET_POSITION_TARGET_LOCAL_NED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_setup_signing.h b/common/mavlink_msg_setup_signing.h index e9bab0cb..40b2feed 100644 --- a/common/mavlink_msg_setup_signing.h +++ b/common/mavlink_msg_setup_signing.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_setup_signing_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_SETUP_SIGNING_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_sim_state.h b/common/mavlink_msg_sim_state.h index b128b8d5..33a63661 100644 --- a/common/mavlink_msg_sim_state.h +++ b/common/mavlink_msg_sim_state.h @@ -398,7 +398,7 @@ static inline void mavlink_msg_sim_state_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_SIM_STATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_smart_battery_info.h b/common/mavlink_msg_smart_battery_info.h index b321261b..6c09bbe8 100644 --- a/common/mavlink_msg_smart_battery_info.h +++ b/common/mavlink_msg_smart_battery_info.h @@ -346,7 +346,7 @@ static inline void mavlink_msg_smart_battery_info_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_SMART_BATTERY_INFO_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_statustext.h b/common/mavlink_msg_statustext.h index 28e0c0b0..78db7c60 100644 --- a/common/mavlink_msg_statustext.h +++ b/common/mavlink_msg_statustext.h @@ -188,7 +188,7 @@ static inline void mavlink_msg_statustext_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_STATUSTEXT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_storage_information.h b/common/mavlink_msg_storage_information.h index c10c162b..94317f41 100644 --- a/common/mavlink_msg_storage_information.h +++ b/common/mavlink_msg_storage_information.h @@ -296,7 +296,7 @@ static inline void mavlink_msg_storage_information_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_STORAGE_INFORMATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_supported_tunes.h b/common/mavlink_msg_supported_tunes.h index a8fb9a3a..65862c2e 100644 --- a/common/mavlink_msg_supported_tunes.h +++ b/common/mavlink_msg_supported_tunes.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_supported_tunes_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_SUPPORTED_TUNES_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_sys_status.h b/common/mavlink_msg_sys_status.h index 6175bf8b..fb589236 100644 --- a/common/mavlink_msg_sys_status.h +++ b/common/mavlink_msg_sys_status.h @@ -338,7 +338,7 @@ static inline void mavlink_msg_sys_status_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_SYS_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_system_time.h b/common/mavlink_msg_system_time.h index a3848c74..0b043636 100644 --- a/common/mavlink_msg_system_time.h +++ b/common/mavlink_msg_system_time.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_system_time_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_SYSTEM_TIME_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_terrain_check.h b/common/mavlink_msg_terrain_check.h index 74afd52e..eaadfa15 100644 --- a/common/mavlink_msg_terrain_check.h +++ b/common/mavlink_msg_terrain_check.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_terrain_check_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_TERRAIN_CHECK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_terrain_data.h b/common/mavlink_msg_terrain_data.h index 3099502c..ca674511 100644 --- a/common/mavlink_msg_terrain_data.h +++ b/common/mavlink_msg_terrain_data.h @@ -200,7 +200,7 @@ static inline void mavlink_msg_terrain_data_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_TERRAIN_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_terrain_report.h b/common/mavlink_msg_terrain_report.h index 8757a75a..92d57a4a 100644 --- a/common/mavlink_msg_terrain_report.h +++ b/common/mavlink_msg_terrain_report.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_terrain_report_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_TERRAIN_REPORT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_terrain_request.h b/common/mavlink_msg_terrain_request.h index 9889edd7..a76cfdd3 100644 --- a/common/mavlink_msg_terrain_request.h +++ b/common/mavlink_msg_terrain_request.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_terrain_request_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_TERRAIN_REQUEST_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_time_estimate_to_target.h b/common/mavlink_msg_time_estimate_to_target.h index 29d03d59..dd69e4cc 100644 --- a/common/mavlink_msg_time_estimate_to_target.h +++ b/common/mavlink_msg_time_estimate_to_target.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_time_estimate_to_target_send_struct(mavlink_chann #if MAVLINK_MSG_ID_TIME_ESTIMATE_TO_TARGET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_timesync.h b/common/mavlink_msg_timesync.h index a9de47dd..a89c4e83 100644 --- a/common/mavlink_msg_timesync.h +++ b/common/mavlink_msg_timesync.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_timesync_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_TIMESYNC_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_trajectory_representation_bezier.h b/common/mavlink_msg_trajectory_representation_bezier.h index c535fd44..8764da35 100644 --- a/common/mavlink_msg_trajectory_representation_bezier.h +++ b/common/mavlink_msg_trajectory_representation_bezier.h @@ -228,7 +228,7 @@ static inline void mavlink_msg_trajectory_representation_bezier_send_struct(mavl #if MAVLINK_MSG_ID_TRAJECTORY_REPRESENTATION_BEZIER_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_trajectory_representation_waypoints.h b/common/mavlink_msg_trajectory_representation_waypoints.h index 59806c11..45798ccd 100644 --- a/common/mavlink_msg_trajectory_representation_waypoints.h +++ b/common/mavlink_msg_trajectory_representation_waypoints.h @@ -319,7 +319,7 @@ static inline void mavlink_msg_trajectory_representation_waypoints_send_struct(m #if MAVLINK_MSG_ID_TRAJECTORY_REPRESENTATION_WAYPOINTS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_tunnel.h b/common/mavlink_msg_tunnel.h index 87131588..1541e134 100644 --- a/common/mavlink_msg_tunnel.h +++ b/common/mavlink_msg_tunnel.h @@ -200,7 +200,7 @@ static inline void mavlink_msg_tunnel_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_TUNNEL_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_uavcan_node_info.h b/common/mavlink_msg_uavcan_node_info.h index 7b04880c..83a4be5a 100644 --- a/common/mavlink_msg_uavcan_node_info.h +++ b/common/mavlink_msg_uavcan_node_info.h @@ -249,7 +249,7 @@ static inline void mavlink_msg_uavcan_node_info_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_UAVCAN_NODE_INFO_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_uavcan_node_status.h b/common/mavlink_msg_uavcan_node_status.h index 6f1d8d8f..50e3af6e 100644 --- a/common/mavlink_msg_uavcan_node_status.h +++ b/common/mavlink_msg_uavcan_node_status.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_uavcan_node_status_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_UAVCAN_NODE_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_utm_global_position.h b/common/mavlink_msg_utm_global_position.h index 0c8ee722..587f7bb6 100644 --- a/common/mavlink_msg_utm_global_position.h +++ b/common/mavlink_msg_utm_global_position.h @@ -356,7 +356,7 @@ static inline void mavlink_msg_utm_global_position_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_UTM_GLOBAL_POSITION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_v2_extension.h b/common/mavlink_msg_v2_extension.h index 689e8911..93c652e6 100644 --- a/common/mavlink_msg_v2_extension.h +++ b/common/mavlink_msg_v2_extension.h @@ -200,7 +200,7 @@ static inline void mavlink_msg_v2_extension_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_V2_EXTENSION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_vfr_hud.h b/common/mavlink_msg_vfr_hud.h index f1706ea6..517ec8c5 100644 --- a/common/mavlink_msg_vfr_hud.h +++ b/common/mavlink_msg_vfr_hud.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_vfr_hud_send_struct(mavlink_channel_t chan, const #if MAVLINK_MSG_ID_VFR_HUD_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_vibration.h b/common/mavlink_msg_vibration.h index acc99c4f..1d029260 100644 --- a/common/mavlink_msg_vibration.h +++ b/common/mavlink_msg_vibration.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_vibration_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_VIBRATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_vicon_position_estimate.h b/common/mavlink_msg_vicon_position_estimate.h index 753f5260..8dc89fcf 100644 --- a/common/mavlink_msg_vicon_position_estimate.h +++ b/common/mavlink_msg_vicon_position_estimate.h @@ -236,7 +236,7 @@ static inline void mavlink_msg_vicon_position_estimate_send_struct(mavlink_chann #if MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_video_stream_information.h b/common/mavlink_msg_video_stream_information.h index aa6d84b7..2e9ea7f4 100644 --- a/common/mavlink_msg_video_stream_information.h +++ b/common/mavlink_msg_video_stream_information.h @@ -285,7 +285,7 @@ static inline void mavlink_msg_video_stream_information_send_struct(mavlink_chan #if MAVLINK_MSG_ID_VIDEO_STREAM_INFORMATION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_video_stream_status.h b/common/mavlink_msg_video_stream_status.h index 38094100..8058b05f 100644 --- a/common/mavlink_msg_video_stream_status.h +++ b/common/mavlink_msg_video_stream_status.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_video_stream_status_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_VIDEO_STREAM_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_vision_position_estimate.h b/common/mavlink_msg_vision_position_estimate.h index 438b8c5b..e0ebff7d 100644 --- a/common/mavlink_msg_vision_position_estimate.h +++ b/common/mavlink_msg_vision_position_estimate.h @@ -248,7 +248,7 @@ static inline void mavlink_msg_vision_position_estimate_send_struct(mavlink_chan #if MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_vision_speed_estimate.h b/common/mavlink_msg_vision_speed_estimate.h index 7c993e8f..c12206a2 100644 --- a/common/mavlink_msg_vision_speed_estimate.h +++ b/common/mavlink_msg_vision_speed_estimate.h @@ -212,7 +212,7 @@ static inline void mavlink_msg_vision_speed_estimate_send_struct(mavlink_channel #if MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_wheel_distance.h b/common/mavlink_msg_wheel_distance.h index d506f003..6a177c88 100644 --- a/common/mavlink_msg_wheel_distance.h +++ b/common/mavlink_msg_wheel_distance.h @@ -176,7 +176,7 @@ static inline void mavlink_msg_wheel_distance_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_WHEEL_DISTANCE_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_wifi_config_ap.h b/common/mavlink_msg_wifi_config_ap.h index f5abc247..743452d0 100644 --- a/common/mavlink_msg_wifi_config_ap.h +++ b/common/mavlink_msg_wifi_config_ap.h @@ -189,7 +189,7 @@ static inline void mavlink_msg_wifi_config_ap_send_struct(mavlink_channel_t chan #if MAVLINK_MSG_ID_WIFI_CONFIG_AP_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_winch_status.h b/common/mavlink_msg_winch_status.h index 62bd6169..d164007c 100644 --- a/common/mavlink_msg_winch_status.h +++ b/common/mavlink_msg_winch_status.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_winch_status_send_struct(mavlink_channel_t chan, #if MAVLINK_MSG_ID_WINCH_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/common/mavlink_msg_wind_cov.h b/common/mavlink_msg_wind_cov.h index abce953e..1d4641cf 100644 --- a/common/mavlink_msg_wind_cov.h +++ b/common/mavlink_msg_wind_cov.h @@ -254,7 +254,7 @@ static inline void mavlink_msg_wind_cov_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_WIND_COV_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/development/mavlink_msg_airspeed.h b/development/mavlink_msg_airspeed.h index 874dd8a4..06057bc5 100644 --- a/development/mavlink_msg_airspeed.h +++ b/development/mavlink_msg_airspeed.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_airspeed_send_struct(mavlink_channel_t chan, cons #if MAVLINK_MSG_ID_AIRSPEED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/development/mavlink_msg_component_information_basic.h b/development/mavlink_msg_component_information_basic.h index bfcd1fc2..a08a6546 100644 --- a/development/mavlink_msg_component_information_basic.h +++ b/development/mavlink_msg_component_information_basic.h @@ -215,7 +215,7 @@ static inline void mavlink_msg_component_information_basic_send_struct(mavlink_c #if MAVLINK_MSG_ID_COMPONENT_INFORMATION_BASIC_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/development/mavlink_msg_group_end.h b/development/mavlink_msg_group_end.h index 58843193..854c934f 100644 --- a/development/mavlink_msg_group_end.h +++ b/development/mavlink_msg_group_end.h @@ -186,7 +186,7 @@ static inline void mavlink_msg_group_end_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_GROUP_END_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/development/mavlink_msg_group_start.h b/development/mavlink_msg_group_start.h index c62dc564..ae84c3b1 100644 --- a/development/mavlink_msg_group_start.h +++ b/development/mavlink_msg_group_start.h @@ -186,7 +186,7 @@ static inline void mavlink_msg_group_start_send_struct(mavlink_channel_t chan, c #if MAVLINK_MSG_ID_GROUP_START_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/development/mavlink_msg_mission_changed.h b/development/mavlink_msg_mission_changed.h index 28f75098..20c54626 100644 --- a/development/mavlink_msg_mission_changed.h +++ b/development/mavlink_msg_mission_changed.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_mission_changed_send_struct(mavlink_channel_t cha #if MAVLINK_MSG_ID_MISSION_CHANGED_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/development/mavlink_msg_mission_checksum.h b/development/mavlink_msg_mission_checksum.h index 68e39b36..b296967d 100644 --- a/development/mavlink_msg_mission_checksum.h +++ b/development/mavlink_msg_mission_checksum.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_mission_checksum_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_MISSION_CHECKSUM_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/development/mavlink_msg_param_ack_transaction.h b/development/mavlink_msg_param_ack_transaction.h index 404b084a..3fe5d7d4 100644 --- a/development/mavlink_msg_param_ack_transaction.h +++ b/development/mavlink_msg_param_ack_transaction.h @@ -212,7 +212,7 @@ static inline void mavlink_msg_param_ack_transaction_send_struct(mavlink_channel #if MAVLINK_MSG_ID_PARAM_ACK_TRANSACTION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/development/mavlink_msg_wifi_network_info.h b/development/mavlink_msg_wifi_network_info.h index 95859a3d..90f932a4 100644 --- a/development/mavlink_msg_wifi_network_info.h +++ b/development/mavlink_msg_wifi_network_info.h @@ -200,7 +200,7 @@ static inline void mavlink_msg_wifi_network_info_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_WIFI_NETWORK_INFO_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/icarous/mavlink_msg_icarous_heartbeat.h b/icarous/mavlink_msg_icarous_heartbeat.h index d9354281..8a1d9ba9 100644 --- a/icarous/mavlink_msg_icarous_heartbeat.h +++ b/icarous/mavlink_msg_icarous_heartbeat.h @@ -158,7 +158,7 @@ static inline void mavlink_msg_icarous_heartbeat_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_ICAROUS_HEARTBEAT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/icarous/mavlink_msg_icarous_kinematic_bands.h b/icarous/mavlink_msg_icarous_kinematic_bands.h index 98345f15..dfe6b9d3 100644 --- a/icarous/mavlink_msg_icarous_kinematic_bands.h +++ b/icarous/mavlink_msg_icarous_kinematic_bands.h @@ -338,7 +338,7 @@ static inline void mavlink_msg_icarous_kinematic_bands_send_struct(mavlink_chann #if MAVLINK_MSG_ID_ICAROUS_KINEMATIC_BANDS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_airspeeds.h b/matrixpilot/mavlink_msg_airspeeds.h index 54d470c1..b886723b 100644 --- a/matrixpilot/mavlink_msg_airspeeds.h +++ b/matrixpilot/mavlink_msg_airspeeds.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_airspeeds_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_AIRSPEEDS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_altitudes.h b/matrixpilot/mavlink_msg_altitudes.h index 535b70a5..0afb67ed 100644 --- a/matrixpilot/mavlink_msg_altitudes.h +++ b/matrixpilot/mavlink_msg_altitudes.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_altitudes_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_ALTITUDES_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_flexifunction_buffer_function.h b/matrixpilot/mavlink_msg_flexifunction_buffer_function.h index 6b20b55a..b5d5d938 100644 --- a/matrixpilot/mavlink_msg_flexifunction_buffer_function.h +++ b/matrixpilot/mavlink_msg_flexifunction_buffer_function.h @@ -224,7 +224,7 @@ static inline void mavlink_msg_flexifunction_buffer_function_send_struct(mavlink #if MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_flexifunction_buffer_function_ack.h b/matrixpilot/mavlink_msg_flexifunction_buffer_function_ack.h index e7f1faf7..b8d8dd2e 100644 --- a/matrixpilot/mavlink_msg_flexifunction_buffer_function_ack.h +++ b/matrixpilot/mavlink_msg_flexifunction_buffer_function_ack.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_flexifunction_buffer_function_ack_send_struct(mav #if MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_flexifunction_command.h b/matrixpilot/mavlink_msg_flexifunction_command.h index 0b842e9d..7de0d8c0 100644 --- a/matrixpilot/mavlink_msg_flexifunction_command.h +++ b/matrixpilot/mavlink_msg_flexifunction_command.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_flexifunction_command_send_struct(mavlink_channel #if MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_flexifunction_command_ack.h b/matrixpilot/mavlink_msg_flexifunction_command_ack.h index fbaa983c..148bf3d8 100644 --- a/matrixpilot/mavlink_msg_flexifunction_command_ack.h +++ b/matrixpilot/mavlink_msg_flexifunction_command_ack.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_flexifunction_command_ack_send_struct(mavlink_cha #if MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_flexifunction_directory.h b/matrixpilot/mavlink_msg_flexifunction_directory.h index a2c7b5a1..60602792 100644 --- a/matrixpilot/mavlink_msg_flexifunction_directory.h +++ b/matrixpilot/mavlink_msg_flexifunction_directory.h @@ -212,7 +212,7 @@ static inline void mavlink_msg_flexifunction_directory_send_struct(mavlink_chann #if MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_flexifunction_directory_ack.h b/matrixpilot/mavlink_msg_flexifunction_directory_ack.h index 27c9354d..6f2e50f4 100644 --- a/matrixpilot/mavlink_msg_flexifunction_directory_ack.h +++ b/matrixpilot/mavlink_msg_flexifunction_directory_ack.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_flexifunction_directory_ack_send_struct(mavlink_c #if MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_flexifunction_read_req.h b/matrixpilot/mavlink_msg_flexifunction_read_req.h index 329abb62..84a3d551 100644 --- a/matrixpilot/mavlink_msg_flexifunction_read_req.h +++ b/matrixpilot/mavlink_msg_flexifunction_read_req.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_flexifunction_read_req_send_struct(mavlink_channe #if MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_flexifunction_set.h b/matrixpilot/mavlink_msg_flexifunction_set.h index 0371dfd1..4705bb22 100644 --- a/matrixpilot/mavlink_msg_flexifunction_set.h +++ b/matrixpilot/mavlink_msg_flexifunction_set.h @@ -170,7 +170,7 @@ static inline void mavlink_msg_flexifunction_set_send_struct(mavlink_channel_t c #if MAVLINK_MSG_ID_FLEXIFUNCTION_SET_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f13.h b/matrixpilot/mavlink_msg_serial_udb_extra_f13.h index 476504fa..4e4f71da 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f13.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f13.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_serial_udb_extra_f13_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f14.h b/matrixpilot/mavlink_msg_serial_udb_extra_f14.h index 9e1a2758..f278b733 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f14.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f14.h @@ -278,7 +278,7 @@ static inline void mavlink_msg_serial_udb_extra_f14_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f15.h b/matrixpilot/mavlink_msg_serial_udb_extra_f15.h index 0f44a0fa..dc6e4673 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f15.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f15.h @@ -171,7 +171,7 @@ static inline void mavlink_msg_serial_udb_extra_f15_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f16.h b/matrixpilot/mavlink_msg_serial_udb_extra_f16.h index f88f9973..b683ab80 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f16.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f16.h @@ -171,7 +171,7 @@ static inline void mavlink_msg_serial_udb_extra_f16_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f17.h b/matrixpilot/mavlink_msg_serial_udb_extra_f17.h index 5f335427..4fd35413 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f17.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f17.h @@ -182,7 +182,7 @@ static inline void mavlink_msg_serial_udb_extra_f17_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F17_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f18.h b/matrixpilot/mavlink_msg_serial_udb_extra_f18.h index 1de567fa..480ea5bf 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f18.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f18.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_serial_udb_extra_f18_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F18_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f19.h b/matrixpilot/mavlink_msg_serial_udb_extra_f19.h index d27716fa..9119f0ab 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f19.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f19.h @@ -242,7 +242,7 @@ static inline void mavlink_msg_serial_udb_extra_f19_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F19_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f20.h b/matrixpilot/mavlink_msg_serial_udb_extra_f20.h index 33ef2069..a4fb5299 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f20.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f20.h @@ -302,7 +302,7 @@ static inline void mavlink_msg_serial_udb_extra_f20_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F20_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f21.h b/matrixpilot/mavlink_msg_serial_udb_extra_f21.h index 6a0325ff..af4e2f60 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f21.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f21.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_serial_udb_extra_f21_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F21_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f22.h b/matrixpilot/mavlink_msg_serial_udb_extra_f22.h index 2e9e2905..a139fa4b 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f22.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f22.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_serial_udb_extra_f22_send_struct(mavlink_channel_ #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F22_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f2_a.h b/matrixpilot/mavlink_msg_serial_udb_extra_f2_a.h index 27f9b1f9..7cd6c4fa 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f2_a.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f2_a.h @@ -470,7 +470,7 @@ static inline void mavlink_msg_serial_udb_extra_f2_a_send_struct(mavlink_channel #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f2_b.h b/matrixpilot/mavlink_msg_serial_udb_extra_f2_b.h index 5c148b1f..b1194ef8 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f2_b.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f2_b.h @@ -746,7 +746,7 @@ static inline void mavlink_msg_serial_udb_extra_f2_b_send_struct(mavlink_channel #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f4.h b/matrixpilot/mavlink_msg_serial_udb_extra_f4.h index cd6d5d27..66d46c4a 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f4.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f4.h @@ -266,7 +266,7 @@ static inline void mavlink_msg_serial_udb_extra_f4_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f5.h b/matrixpilot/mavlink_msg_serial_udb_extra_f5.h index 5d4c1bda..3f262a0b 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f5.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f5.h @@ -194,7 +194,7 @@ static inline void mavlink_msg_serial_udb_extra_f5_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f6.h b/matrixpilot/mavlink_msg_serial_udb_extra_f6.h index 1f06b36a..bff58b85 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f6.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f6.h @@ -206,7 +206,7 @@ static inline void mavlink_msg_serial_udb_extra_f6_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f7.h b/matrixpilot/mavlink_msg_serial_udb_extra_f7.h index 01cb310d..3cb3b722 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f7.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f7.h @@ -218,7 +218,7 @@ static inline void mavlink_msg_serial_udb_extra_f7_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/matrixpilot/mavlink_msg_serial_udb_extra_f8.h b/matrixpilot/mavlink_msg_serial_udb_extra_f8.h index fde34056..c8ad3a63 100644 --- a/matrixpilot/mavlink_msg_serial_udb_extra_f8.h +++ b/matrixpilot/mavlink_msg_serial_udb_extra_f8.h @@ -230,7 +230,7 @@ static inline void mavlink_msg_serial_udb_extra_f8_send_struct(mavlink_channel_t #if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/mavlink_helpers.h b/mavlink_helpers.h index fed04d68..ffc6a015 100644 --- a/mavlink_helpers.h +++ b/mavlink_helpers.h @@ -133,7 +133,8 @@ MAVLINK_HELPER bool mavlink_signature_check(mavlink_signing_t *signing, mavlink_sha256_init(&ctx); mavlink_sha256_update(&ctx, signing->secret_key, sizeof(signing->secret_key)); - mavlink_sha256_update(&ctx, p, MAVLINK_CORE_HEADER_LEN+1+msg->len); + mavlink_sha256_update(&ctx, p, MAVLINK_NUM_HEADER_BYTES); + mavlink_sha256_update(&ctx, _MAV_PAYLOAD(msg), msg->len); mavlink_sha256_update(&ctx, msg->ck, 2); mavlink_sha256_update(&ctx, psig, 1+6); mavlink_sha256_final_48(&ctx, signature); @@ -802,7 +803,7 @@ MAVLINK_HELPER uint8_t mavlink_frame_char_buffer(mavlink_message_t* rxmsg, } bufferIndex++; - // If a message has been sucessfully decoded, check index + // If a message has been successfully decoded, check index if (status->msg_received == MAVLINK_FRAMING_OK) { //while(status->current_seq != rxmsg->seq) diff --git a/minimal/mavlink_msg_heartbeat.h b/minimal/mavlink_msg_heartbeat.h index 7774a100..15d63931 100644 --- a/minimal/mavlink_msg_heartbeat.h +++ b/minimal/mavlink_msg_heartbeat.h @@ -215,7 +215,7 @@ static inline void mavlink_msg_heartbeat_send_struct(mavlink_channel_t chan, con #if MAVLINK_MSG_ID_HEARTBEAT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/minimal/mavlink_msg_protocol_version.h b/minimal/mavlink_msg_protocol_version.h index d795ff28..00ce8158 100644 --- a/minimal/mavlink_msg_protocol_version.h +++ b/minimal/mavlink_msg_protocol_version.h @@ -201,7 +201,7 @@ static inline void mavlink_msg_protocol_version_send_struct(mavlink_channel_t ch #if MAVLINK_MSG_ID_PROTOCOL_VERSION_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/test/mavlink_msg_test_types.h b/test/mavlink_msg_test_types.h index 8b890b57..28aff00c 100644 --- a/test/mavlink_msg_test_types.h +++ b/test/mavlink_msg_test_types.h @@ -414,7 +414,7 @@ static inline void mavlink_msg_test_types_send_struct(mavlink_channel_t chan, co #if MAVLINK_MSG_ID_TEST_TYPES_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/uAvionix/mavlink_msg_uavionix_adsb_out_cfg.h b/uAvionix/mavlink_msg_uavionix_adsb_out_cfg.h index 4e1c24c1..b580bf6d 100644 --- a/uAvionix/mavlink_msg_uavionix_adsb_out_cfg.h +++ b/uAvionix/mavlink_msg_uavionix_adsb_out_cfg.h @@ -236,7 +236,7 @@ static inline void mavlink_msg_uavionix_adsb_out_cfg_send_struct(mavlink_channel #if MAVLINK_MSG_ID_UAVIONIX_ADSB_OUT_CFG_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/uAvionix/mavlink_msg_uavionix_adsb_out_dynamic.h b/uAvionix/mavlink_msg_uavionix_adsb_out_dynamic.h index 704191bb..16616b2f 100644 --- a/uAvionix/mavlink_msg_uavionix_adsb_out_dynamic.h +++ b/uAvionix/mavlink_msg_uavionix_adsb_out_dynamic.h @@ -338,7 +338,7 @@ static inline void mavlink_msg_uavionix_adsb_out_dynamic_send_struct(mavlink_cha #if MAVLINK_MSG_ID_UAVIONIX_ADSB_OUT_DYNAMIC_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an diff --git a/uAvionix/mavlink_msg_uavionix_adsb_transceiver_health_report.h b/uAvionix/mavlink_msg_uavionix_adsb_transceiver_health_report.h index 12514a96..cd35c7db 100644 --- a/uAvionix/mavlink_msg_uavionix_adsb_transceiver_health_report.h +++ b/uAvionix/mavlink_msg_uavionix_adsb_transceiver_health_report.h @@ -158,7 +158,7 @@ static inline void mavlink_msg_uavionix_adsb_transceiver_health_report_send_stru #if MAVLINK_MSG_ID_UAVIONIX_ADSB_TRANSCEIVER_HEALTH_REPORT_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* - This varient of _send() can be used to save stack space by re-using + This variant of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an