Tag release version 6.0.3.

https://gitlab.com/kicad/code/kicad/-/commit/0a8718cd1d62a40ea9094b773fb6caf56a695a05
https://gitlab.com/kicad/code/kicad/-/commit/7fb4a2c0a53089439ef3c31800bc310bc7c8a6ba

CMakeLists.txt

@@ -156,6 +156,11 @@ option( KICAD_STEP_EXPORT_LIB
     "Build and use kicad2step as a library, meant for debugging"
     OFF )
 
+cmake_dependent_option( KICAD_WIN32_VERIFY_CODESIGN
+    "When enabled, verifies the code signing signature of certain DLLs loaded during runtime."
+    OFF "WIN32"
+    OFF )
+
 # Global setting: exports are explicit
 set( CMAKE_CXX_VISIBILITY_PRESET "hidden" )
 set( CMAKE_VISIBILITY_INLINES_HIDDEN ON )
@@ -177,6 +182,10 @@ if( KICAD_GAL_PROFILE )
     add_definitions( -DKICAD_GAL_PROFILE )
 endif()
 
+if( KICAD_WIN32_VERIFY_CODESIGN )
+    add_definitions( -DKICAD_WIN32_VERIFY_CODESIGN )
+endif()
+
 # Ensure DEBUG is defined for all platforms in Debug builds
 # change to add_compile_definitions() after minimum required CMake version is 3.12
 set_property( DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS $<$<CONFIG:Debug>:DEBUG> )
@@ -490,9 +499,10 @@ endif()
 # KIFACE_SUFFIX is the file extension used for top level program modules which
 # implement the KIFACE interface.  A valid suffix starts with a period '.'.
 
-if( false )
-    # This is the eventual situation near milestone C) of modular-kicad blueprint.
-    # Until then we use .kiface extension so we don't collide with python DSO.
+if( WIN32 )
+    # We use .kiface extension so we don't collide with python DSO. (Linux/mac issue?)
+    # Windows works fine with the native dll extension
+    # which also resolves metadata issues because windows wants to see the dll extension
     set( KIFACE_SUFFIX  ${CMAKE_SHARED_MODULE_SUFFIX} )
 else()
     # Temporary situation until we can dovetail the python DSO into the kiface DSO.
@@ -1000,7 +1010,10 @@ add_subdirectory( cvpcb )               # must be after pcbnew
 add_subdirectory( kicad )               # should follow pcbnew, eeschema
 add_subdirectory( tools )
 add_subdirectory( utils )
-add_subdirectory( qa )
+
+if( KICAD_BUILD_QA_TESTS )
+    add_subdirectory( qa )
+endif()
 
 # Demos
 if( KICAD_INSTALL_DEMOS )

CMakeModules/BuildSteps/WriteVersionHeader.cmake

@@ -46,7 +46,7 @@ if( CMAKE_MATCH_COUNT EQUAL 3 )
 
     set( KICAD_WIN32_RC_FILEVER_STR "${CMAKE_MATCH_1}.${CMAKE_MATCH_2}.${CMAKE_MATCH_3}.${KICAD_GIT_REV}\\0" )
     set( KICAD_WIN32_RC_FILEVER     "${CMAKE_MATCH_1}, ${CMAKE_MATCH_2}, ${CMAKE_MATCH_3}, ${KICAD_GIT_REV}" )
-    set( KICAD_WIN32_RC_PRODVER_STR "${CMAKE_MATCH_1}.${CMAKE_MATCH_2}\\0" )
+    set( KICAD_WIN32_RC_PRODVER_STR "${CMAKE_MATCH_1}.${CMAKE_MATCH_2}.${CMAKE_MATCH_3}\\0" )
     set( KICAD_WIN32_RC_PRODVER     "${CMAKE_MATCH_1}, ${CMAKE_MATCH_2}, ${CMAKE_MATCH_3}, ${KICAD_GIT_REV}" )
 else()
     message( FATAL_ERROR "Unable to extract major, minor and patch version string" )

CMakeModules/KiCadVersion.cmake

@@ -37,7 +37,7 @@
 # KiCad.
 #
 # Note: This version string should follow the semantic versioning system
-set( KICAD_SEMANTIC_VERSION "6.0.2" )
+set( KICAD_SEMANTIC_VERSION "6.0.3" )
 
 # Default the version to the semantic version.
 # This is overridden by the git repository tag though (if using git)

README.md

@@ -16,9 +16,6 @@ KiCad uses a host of CI resources.
 
 GitLab CI pipeline status can be viewed for Linux and Windows builds of the latest commits.
 
-Additional status is available for builds:
-[<img alt="Jenkins" src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins.simonrichter.eu%2Fjob%2Fwindows-kicad-ps-pipeline%2F&label=Windows%2C%20MSVC%Nightly&style=plastic">](https://jenkins.simonrichter.eu/job/windows-kicad-ps-pipeline/)
-
 ## Release status
 [![latest released version(s)](https://repology.org/badge/latest-versions/kicad.svg)](https://repology.org/project/kicad/versions)
 [![Release status](https://repology.org/badge/tiny-repos/kicad.svg)](https://repology.org/metapackage/kicad/versions)

common/advanced_config.cpp

@@ -266,12 +266,12 @@ ADVANCED_CFG::ADVANCED_CFG()
     m_DrawArcAccuracy           = 10.0;
     m_DrawArcCenterMaxAngle     = 50.0;
     m_MaxTangentAngleDeviation  = 1.0;
-    m_MaxTrackLengthToKeep      = 0.0001;
+    m_MaxTrackLengthToKeep      = 0.0005;
     m_ExtraZoneDisplayModes     = false;
     m_DrawTriangulationOutlines = false;
 
-    m_ExtraClearance            = 0.0001;
-    m_DRCEpsilon                = 0.0001;   // 0.1um is small enough not to materially violate
+    m_ExtraClearance            = 0.0005;
+    m_DRCEpsilon                = 0.0005;   // 0.5um is small enough not to materially violate
                                             // any constraints.
 
     m_HoleWallThickness         = 0.020;    // IPC-6012 says 15-18um; Cadence says at least
@@ -334,83 +334,83 @@ void ADVANCED_CFG::loadSettings( wxConfigBase& aCfg )
     std::vector<PARAM_CFG*> configParams;
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::RealtimeConnectivity,
-                                                &m_RealTimeConnectivity, true ) );
+                                                &m_RealTimeConnectivity, m_RealTimeConnectivity ) );
 
     configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::ExtraFillMargin,
-                                                  &m_ExtraClearance, 0.0005, 0.0, 1.0 ) );
+                                                  &m_ExtraClearance, m_ExtraClearance, 0.0, 1.0 ) );
 
     configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::DRCEpsilon,
-                                                  &m_DRCEpsilon, 0.0005, 0.0, 1.0 ) );
+                                                  &m_DRCEpsilon, m_DRCEpsilon, 0.0, 1.0 ) );
 
     configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::HoleWallThickness,
-                                                  &m_HoleWallThickness, 0.020, 0.0, 1.0 ) );
+                                                  &m_HoleWallThickness, m_HoleWallThickness, 0.0, 1.0 ) );
 
     configParams.push_back( new PARAM_CFG_INT( true, AC_KEYS::CoroutineStackSize,
                                                &m_CoroutineStackSize, AC_STACK::default_stack,
                                                AC_STACK::min_stack, AC_STACK::max_stack ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ShowRouterDebugGraphics,
-                                                &m_ShowRouterDebugGraphics, false ) );
+                                                &m_ShowRouterDebugGraphics, m_ShowRouterDebugGraphics ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::CompactFileSave,
-                                                &m_CompactSave, false ) );
+                                                &m_CompactSave, m_CompactSave ) );
 
     configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::DrawArcAccuracy,
-                                                  &m_DrawArcAccuracy, 10.0, 0.0, 100000.0 ) );
+                                                  &m_DrawArcAccuracy, m_DrawArcAccuracy, 0.0, 100000.0 ) );
 
     configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::DrawArcCenterStartEndMaxAngle,
-                                                  &m_DrawArcCenterMaxAngle, 50.0, 0.0, 100000.0 ) );
+                                                  &m_DrawArcCenterMaxAngle, m_DrawArcCenterMaxAngle, 0.0, 100000.0 ) );
 
     configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::MaxTangentTrackAngleDeviation,
-                                                  &m_MaxTangentAngleDeviation, 1.0, 0.0, 90.0 ) );
+                                                  &m_MaxTangentAngleDeviation, m_MaxTangentAngleDeviation, 0.0, 90.0 ) );
 
     configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::MaxTrackLengthToKeep,
-                                                  &m_MaxTrackLengthToKeep, 0.0005, 0.0, 1.0 ) );
+                                                  &m_MaxTrackLengthToKeep, m_MaxTrackLengthToKeep, 0.0, 1.0 ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ExtraZoneDisplayModes,
-                                                &m_ExtraZoneDisplayModes, false ) );
+                                                &m_ExtraZoneDisplayModes, m_ExtraZoneDisplayModes ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::StrokeTriangulation,
-                                                &m_DrawTriangulationOutlines, false ) );
+                                                &m_DrawTriangulationOutlines, m_DrawTriangulationOutlines ) );
 
     configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::MinPlotPenWidth,
-                                                  &m_MinPlotPenWidth, 0.0212, 0.0, 1.0 ) );
+                                                  &m_MinPlotPenWidth, m_MinPlotPenWidth, 0.0, 1.0 ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::DebugZoneFiller,
-                                                &m_DebugZoneFiller, false ) );
+                                                &m_DebugZoneFiller, m_DebugZoneFiller ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::DebugPDFWriter,
-                                                &m_DebugPDFWriter, false ) );
+                                                &m_DebugPDFWriter, m_DebugPDFWriter ) );
 
     configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::SmallDrillMarkSize,
-                                                  &m_SmallDrillMarkSize, 0.35, 0.0, 3.0 ) );
+                                                  &m_SmallDrillMarkSize, m_SmallDrillMarkSize, 0.0, 3.0 ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::HotkeysDumper,
-                                                &m_HotkeysDumper, false ) );
+                                                &m_HotkeysDumper, m_HotkeysDumper ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::DrawBoundingBoxes,
-                                                &m_DrawBoundingBoxes, false ) );
+                                                &m_DrawBoundingBoxes, m_DrawBoundingBoxes ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ShowPcbnewExportNetlist,
-                                                &m_ShowPcbnewExportNetlist, false ) );
+                                                &m_ShowPcbnewExportNetlist, m_ShowPcbnewExportNetlist ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::Skip3DModelFileCache,
-                                                &m_Skip3DModelFileCache, false ) );
+                                                &m_Skip3DModelFileCache, m_Skip3DModelFileCache ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::Skip3DModelMemoryCache,
-                                                &m_Skip3DModelMemoryCache, false ) );
+                                                &m_Skip3DModelMemoryCache, m_Skip3DModelMemoryCache ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::HideVersionFromTitle,
-                                                &m_HideVersionFromTitle, false ) );
+                                                &m_HideVersionFromTitle, m_HideVersionFromTitle ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ShowRepairSchematic,
-                                                &m_ShowRepairSchematic, false ) );
+                                                &m_ShowRepairSchematic, m_ShowRepairSchematic ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ShowEventCounters,
-                                                &m_ShowEventCounters, false ) );
+                                                &m_ShowEventCounters, m_ShowEventCounters ) );
 
     configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::AllowManualCanvasScale,
-                                                &m_AllowManualCanvasScale, false ) );
+                                                &m_AllowManualCanvasScale, m_AllowManualCanvasScale ) );
 
     // Special case for trace mask setting...we just grab them and set them immediately
     // Because we even use wxLogTrace inside of advanced config

common/board_printout.cpp

@@ -1,8 +1,8 @@
 /*
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
- * Copyright (C) 2009 Jean-Pierre Charras, jean-pierre.charras@ujf-grenoble.fr
- * Copyright (C) 1992-2016 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 2009 Jean-Pierre Charras, jean-pierre.charras at wanadoo.fr
+ * Copyright (C) 1992-2022 KiCad Developers, see AUTHORS.txt for contributors.
  * Copyright (C) 2018 CERN
  * Author: Maciej Suminski <maciej.suminski@cern.ch>
  *
@@ -70,6 +70,7 @@ BOARD_PRINTOUT::BOARD_PRINTOUT( const BOARD_PRINTOUT_SETTINGS& aParams,
     m_settings( aParams )
 {
     m_view = aView;
+    m_gerbviewPrint = false;
 }
 
 
@@ -85,12 +86,12 @@ void BOARD_PRINTOUT::GetPageInfo( int* minPage, int* maxPage, int* selPageFrom,
 
 void BOARD_PRINTOUT::DrawPage( const wxString& aLayerName, int aPageNum, int aPageCount )
 {
-    auto dc = GetDC();
+    wxDC* dc = GetDC();
     KIGFX::GAL_DISPLAY_OPTIONS options;
-    auto galPrint = KIGFX::GAL_PRINT::Create( options, dc );
-    auto gal = galPrint->GetGAL();
-    auto printCtx = galPrint->GetPrintCtx();
-    auto painter = getPainter( gal );
+    std::unique_ptr<KIGFX::GAL_PRINT> galPrint = KIGFX::GAL_PRINT::Create( options, dc );
+    KIGFX::GAL* gal = galPrint->GetGAL();
+    KIGFX::PRINT_CONTEXT* printCtx = galPrint->GetPrintCtx();
+    std::unique_ptr<KIGFX::PAINTER> painter = getPainter( gal );
     std::unique_ptr<KIGFX::VIEW> view( m_view->DataReference() );
 
     // Target paper size
@@ -175,6 +176,11 @@ void BOARD_PRINTOUT::DrawPage( const wxString& aLayerName, int aPageNum, int aPa
     gal->SetClearColor( dstSettings->GetBackgroundColor() );
     gal->ClearScreen();
 
+    if( m_gerbviewPrint )
+        // Mandatory in Gerbview to use the same order for printing as for screen redraw
+        // due to negative objects that need a specific order
+        view->UseDrawPriority( true );
+
     {
         KIGFX::GAL_DRAWING_CONTEXT ctx( gal );
         view->Redraw();

common/dialog_about/AboutDialog_main.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2010 Rafael Sokolowski <Rafael.Sokolowski@web.de>
- * Copyright (C) 2010-2021 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 2010-2022 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -64,7 +64,7 @@ static void buildKicadAboutBanner( EDA_BASE_FRAME* aParent, ABOUT_APP_INFO& aInf
     aInfo.SetAppName( Pgm().App().GetAppName() );
 
     /* Copyright information */
-    aInfo.SetCopyright( "(C) 1992-2021 KiCad Developers Team" );
+    aInfo.SetCopyright( "(C) 1992-2022 KiCad Developers Team" );
 
     /* KiCad build version */
     wxString version;

common/dialog_about/dialog_about.cpp

@@ -419,7 +419,7 @@ void DIALOG_ABOUT::createNotebookHtmlPage( wxNotebook* aParent, const wxString&
 wxStaticText* DIALOG_ABOUT::wxStaticTextRef( wxScrolledWindow* aParent, const wxString& aReference )
 {
     wxStaticText* text = new wxStaticText( aParent, wxID_ANY,
-                                           wxT( "(wxT( " ) + aReference + wxT( " ))" ) );
+                                           wxT( "(" ) + aReference + wxT( ")" ) );
 
     return text;
 }

common/draw_panel_gal.cpp

@@ -213,6 +213,7 @@ void EDA_DRAW_PANEL_GAL::DoRePaint()
     try
     {
         cntUpd.Start();
+
         try
         {
             m_view->UpdateItems();
@@ -229,9 +230,7 @@ void EDA_DRAW_PANEL_GAL::DoRePaint()
         cntUpd.Stop();
 
         cntCtx.Start();
-        int cookie = rand();
-        m_gal->LockContext( cookie );
-        m_gal->BeginDrawing();
+        KIGFX::GAL_DRAWING_CONTEXT ctx( m_gal );
         cntCtx.Stop();
 
         if( m_view->IsTargetDirty( KIGFX::TARGET_OVERLAY )
@@ -273,9 +272,6 @@ void EDA_DRAW_PANEL_GAL::DoRePaint()
         m_gal->DrawCursor( m_viewControls->GetCursorPosition() );
 
         cntCtxDestroy.Start();
-        m_gal->EndDrawing();
-        m_gal->UnlockContext( cookie );
-        cntCtxDestroy.Stop();
     }
     catch( std::exception& err )
     {
@@ -294,6 +290,9 @@ void EDA_DRAW_PANEL_GAL::DoRePaint()
         }
     }
 
+    // ctx goes out of scope here so destructor would be called
+    cntCtxDestroy.Stop();
+
 
     if( isDirty )
     {

common/eda_shape.cpp

@@ -436,6 +436,12 @@ void EDA_SHAPE::SetCenter( const wxPoint& aCenter )
 
 wxPoint EDA_SHAPE::GetArcMid() const
 {
+    // If none of the input data have changed since we loaded the arc,
+    // keep the original mid point data to minimize churn
+    if( m_arcMidData.start == m_start && m_arcMidData.end == m_end
+            && m_arcMidData.center == m_arcCenter )
+        return m_arcMidData.mid;
+
     wxPoint mid = m_start;
     RotatePoint( &mid, m_arcCenter, -GetArcAngle() / 2.0 );
     return mid;
@@ -486,19 +492,35 @@ int EDA_SHAPE::GetRadius() const
 }
 
 
+void EDA_SHAPE::SetCachedArcData( const wxPoint& aStart, const wxPoint& aMid, const wxPoint& aEnd, const wxPoint& aCenter )
+{
+    m_arcMidData.start = aStart;
+    m_arcMidData.end = aEnd;
+    m_arcMidData.center = aCenter;
+    m_arcMidData.mid = aMid;
+}
+
+
 void EDA_SHAPE::SetArcGeometry( const wxPoint& aStart, const wxPoint& aMid, const wxPoint& aEnd )
 {
+    m_arcMidData = {};
     m_start = aStart;
     m_end = aEnd;
     m_arcCenter = CalcArcCenter( aStart, aMid, aEnd );
+    wxPoint new_mid = GetArcMid();
+
     m_endsSwapped = false;
 
-    /**
-     * If the input winding doesn't match our internal winding, the calculated midpoint will end up
-     * on the other side of the arc.  In this case, we need to flip the start/end points and flag this
-     * change for the system
+    // Watch the ordering here.  GetArcMid above needs to be called prior to initializing the
+    // m_arcMidData structure in order to ensure we get the calculated variant, not the cached
+    SetCachedArcData( aStart, aMid, aEnd, m_arcCenter );
+
+    /*
+     * If the input winding doesn't match our internal winding, the calculated midpoint will end
+     * up on the other side of the arc.  In this case, we need to flip the start/end points and
+     * flag this change for the system.
      */
-    wxPoint new_mid = GetArcMid();
+
     VECTOR2D dist( new_mid - aMid );
     VECTOR2D dist2( new_mid - m_arcCenter );
 

common/eda_text.cpp

@@ -188,7 +188,7 @@ bool EDA_TEXT::Replace( const wxFindReplaceData& aSearchData )
 
 void EDA_TEXT::cacheShownText()
 {
-    if( m_text.IsEmpty() || m_text == wxT( "~" ) )     // ~ is legacy empty-string token
+    if( m_text.IsEmpty() )
     {
         m_shown_text = wxEmptyString;
         m_shown_text_has_text_var_refs = false;
@@ -316,7 +316,9 @@ EDA_RECT EDA_TEXT::GetTextBox( int aLine, bool aInvertY ) const
 
         // interline spacing is only *between* lines, so total height is the height of the first
         // line plus the interline distance (with interline spacing) for all subsequent lines
-        textsize.y += KiROUND( ( strings.GetCount() - 1 ) * interline );
+        // Don't add interline spacing to empty textboxes
+        if( strings.GetCount() )
+            textsize.y += KiROUND( ( strings.GetCount() - 1 ) * interline );
     }
 
     rect.SetSize( textsize );

common/filename_resolver.cpp

@@ -465,10 +465,10 @@ bool FILENAME_RESOLVER::addPath( const SEARCH_PATH& aPath )
             wxString msg = _( "Alias: " );
             msg.append( tpath.m_Alias );
             msg.append( wxT( "\n" ) );
-            msg.append( _( "This path:wxT( " ) + wxS( " ) " ) );
+            msg.append( _( "This path:" ) + wxS( " " ) );
             msg.append( tpath.m_Pathvar );
             msg.append( wxT( "\n" ) );
-            msg.append( _( "Existing path:wxT( " ) + wxS( " ) " ) );
+            msg.append( _( "Existing path:" ) + wxS( " " ) );
             msg.append( sPL->m_Pathvar );
             wxMessageBox( msg, _( "Bad alias (duplicate name)" ) );
 

common/grid_tricks.cpp

@@ -642,9 +642,8 @@ void GRID_TRICKS::paste_text( const wxString& cb_text )
 
     for( int row = start_row;  row < end_row;  ++row )
     {
-        // If number of selected rows bigger than count of rows in
-        // the clipboard, paste from the clipboard again and again
-        // while end of the selection is reached.
+        // If number of selected rows is larger than the count of rows on the clipboard, paste
+        // again and again until the end of the selection is reached.
         if( !rows.HasMoreTokens() )
             rows.SetString( cb_text, ROW_SEP, wxTOKEN_RET_EMPTY );
 
@@ -662,9 +661,12 @@ void GRID_TRICKS::paste_text( const wxString& cb_text )
 
         for( int col = start_col;  col < end_col;  ++col )
         {
-            // If number of selected columns bigger than count of columns in
-            // the clipboard, paste from the clipboard again and again while
-            // end of the selection is reached.
+            // Skip hidden columns
+            if( !m_grid->IsColShown( col ) )
+                continue;
+
+            // If number of selected cols is larger than the count of cols on the clipboard,
+            // paste again and again until the end of the selection is reached.
             if( !cols.HasMoreTokens() )
                 cols.SetString( rowTxt, COL_SEP, wxTOKEN_RET_EMPTY );
 

common/kiway.cpp

@@ -34,6 +34,7 @@
 #include <core/arraydim.h>
 #include <id.h>
 #include <kiplatform/app.h>
+#include <kiplatform/environment.h>
 #include <settings/settings_manager.h>
 #include <logging.h>
 
@@ -230,6 +231,15 @@ KIFACE* KIWAY::KiFACE( FACE_T aFaceId, bool doLoad )
             }
         }
 
+#ifdef KICAD_WIN32_VERIFY_CODESIGN
+        bool codeSignOk = KIPLATFORM::ENV::VerifyFileSignature( dname );
+        if( !codeSignOk )
+        {
+            msg.Printf( _( "Failed to verify kiface library '%s' signature." ), dname );
+            THROW_IO_ERROR( msg );
+        }
+#endif
+
         wxDynamicLibrary dso;
 
         void*   addr = nullptr;

common/paths.cpp

@@ -239,6 +239,26 @@ wxString PATHS::GetStockScriptingPath()
 }
 
 
+wxString PATHS::GetStockTemplatesPath()
+{
+    wxString path;
+
+    path = GetStockDataPath() + wxT( "/template" );
+
+    return path;
+}
+
+
+wxString PATHS::GetLocaleDataPath()
+{
+    wxString path;
+
+    path = GetStockDataPath() + wxT( "/internat" );
+
+    return path;
+}
+
+
 wxString PATHS::GetStockPluginsPath()
 {
     wxFileName fn;

common/pgm_base.cpp

@@ -56,6 +56,7 @@
 #include <settings/settings_manager.h>
 #include <systemdirsappend.h>
 #include <trace_helpers.h>
+#include <paths.h>
 
 
 /**
@@ -540,48 +541,7 @@ void PGM_BASE::SetLanguageIdentifier( int menu_id )
 
 void PGM_BASE::SetLanguagePath()
 {
-    SEARCH_STACK    guesses;
-
-    SystemDirsAppend( &guesses );
-
-    // Add our internat dir to the wxLocale catalog of paths
-    for( unsigned i = 0; i < guesses.GetCount(); i++ )
-    {
-        wxFileName fn( guesses[i], wxEmptyString );
-
-        // Append path for Windows and unix KiCad package install
-        fn.AppendDir( wxT( "share" ) );
-        fn.AppendDir( wxT( "internat" ) );
-
-        if( fn.IsDirReadable() )
-        {
-            wxLogTrace( traceLocale, wxT( "Adding locale lookup path: " ) + fn.GetPath() );
-            wxLocale::AddCatalogLookupPathPrefix( fn.GetPath() );
-        }
-
-        // Append path for unix standard install
-        fn.RemoveLastDir();
-        fn.AppendDir( wxT( "kicad" ) );
-        fn.AppendDir( wxT( "internat" ) );
-
-        if( fn.IsDirReadable() )
-        {
-            wxLogTrace( traceLocale, wxT( "Adding locale lookup path: " ) + fn.GetPath() );
-            wxLocale::AddCatalogLookupPathPrefix( fn.GetPath() );
-        }
-
-        // Append path for macOS install
-        fn.RemoveLastDir();
-        fn.RemoveLastDir();
-        fn.RemoveLastDir();
-        fn.AppendDir( wxT( "internat" ) );
-
-        if( fn.IsDirReadable() )
-        {
-            wxLogTrace( traceLocale, wxT( "Adding locale lookup path: " ) + fn.GetPath() );
-            wxLocale::AddCatalogLookupPathPrefix( fn.GetPath() );
-        }
-    }
+    wxLocale::AddCatalogLookupPathPrefix( PATHS::GetLocaleDataPath() );
 
     if( wxGetEnv( wxT( "KICAD_RUN_FROM_BUILD_DIR" ), nullptr ) )
     {

common/plotters/GERBER_plotter.cpp

@@ -842,8 +842,18 @@ void GERBER_PLOTTER::plotArc( const SHAPE_ARC& aArc, bool aPlotInRegion )
     wxPoint start( aArc.GetP0() );
     wxPoint end( aArc.GetP1() );
     wxPoint center( aArc.GetCenter() );
-    double start_angle = aArc.GetStartAngle();
-    double end_angle = aArc.GetEndAngle();
+    double startAngle = aArc.GetStartAngle();
+    double endAngle = aArc.GetEndAngle();
+
+    if( startAngle > endAngle )
+    {
+        if( endAngle < 0.0 )
+            endAngle = NormalizeAnglePos( endAngle ) ;
+        else
+        {
+            startAngle = NormalizeAnglePos( startAngle ) - 3600.0;
+        }
+    }
 
     if( !aPlotInRegion )
         MoveTo( start);
@@ -855,7 +865,7 @@ void GERBER_PLOTTER::plotArc( const SHAPE_ARC& aArc, bool aPlotInRegion )
 
     fprintf( m_outputFile, "G75*\n" );        // Multiquadrant (360 degrees) mode
 
-    if( start_angle < end_angle )
+    if( startAngle > endAngle )
         fprintf( m_outputFile, "G03*\n" );    // Active circular interpolation, CCW
     else
         fprintf( m_outputFile, "G02*\n" );    // Active circular interpolation, CW
@@ -1010,6 +1020,10 @@ void GERBER_PLOTTER::PlotPoly( const SHAPE_LINE_CHAIN& aPoly, FILL_T aFill, int
                 const SHAPE_ARC& arc = aPoly.Arc( arcindex );
 
                 plotArc( arc, ii > 0 );
+
+                // skip points on arcs, since we plot the arc itself
+                while( ii+1 < aPoly.PointCount() && arcindex == aPoly.ArcIndex( ii+1 ) )
+                    ii++;
             }
         }
 
@@ -1040,12 +1054,17 @@ void GERBER_PLOTTER::PlotPoly( const SHAPE_LINE_CHAIN& aPoly, FILL_T aFill, int
                 const SHAPE_ARC& arc = aPoly.Arc( arcindex );
 
                 plotArc( arc, ii > 0 );
+
+                // skip points on arcs, since we plot the arc itself
+                while( ii+1 < aPoly.PointCount() && arcindex == aPoly.ArcIndex( ii+1 ) )
+                    ii++;
             }
         }
 
         // Ensure the thick outline is closed for filled polygons
         // (if not filled, could be only a polyline)
-        if( aFill != FILL_T::NO_FILL && ( aPoly.CPoint( 0 ) != aPoly.CPoint( -1 ) ) )
+        if( ( aPoly.CPoint( 0 ) != aPoly.CPoint( -1 ) )
+            && ( aPoly.IsClosed() || aFill != FILL_T::NO_FILL ) )
             LineTo( wxPoint( aPoly.CPoint( 0 ) ) );
 
         PenFinish();

common/preview_items/polygon_geom_manager.cpp

@@ -83,7 +83,7 @@ void POLYGON_GEOM_MANAGER::SetLeaderMode( LEADER_MODE aMode )
 
 bool POLYGON_GEOM_MANAGER::IsSelfIntersecting( bool aIncludeLeaderPts ) const
 {
-    auto pts( m_lockedPoints );
+    SHAPE_LINE_CHAIN pts( m_lockedPoints );
 
     if( aIncludeLeaderPts )
     {

common/settings/common_settings.cpp

@@ -509,44 +509,7 @@ void COMMON_SETTINGS::InitializeEnvironment()
     path.AppendDir( wxT( "3dmodels" ) );
     addVar( wxT( "KICAD6_3DMODEL_DIR" ), path.GetFullPath() );
 
-    // We don't have just one default template path, so use this logic that originally was in
-    // PGM_BASE::InitPgm to determine the best default template path
-    {
-        // Attempt to find the best default template path.
-        SEARCH_STACK bases;
-        SEARCH_STACK templatePaths;
-
-        SystemDirsAppend( &bases );
-
-        for( unsigned i = 0; i < bases.GetCount(); ++i )
-        {
-            wxFileName fn( bases[i], wxEmptyString );
-
-            // Add KiCad template file path to search path list.
-            fn.AppendDir( "template" );
-
-            // Only add path if exists and can be read by the user.
-            if( fn.DirExists() && fn.IsDirReadable() )
-            {
-                wxLogTrace( tracePathsAndFiles, "Checking template path '%s' exists",
-                            fn.GetPath() );
-                templatePaths.AddPaths( fn.GetPath() );
-            }
-        }
-
-        if( templatePaths.IsEmpty() )
-        {
-            path = basePath;
-            path.AppendDir( "template" );
-        }
-        else
-        {
-            // Take the first one.  There may be more but this will likely be the best option.
-            path.AssignDir( templatePaths[0] );
-        }
-
-        addVar( wxT( "KICAD6_TEMPLATE_DIR" ), path.GetFullPath() );
-    }
+    addVar( wxT( "KICAD6_TEMPLATE_DIR" ), PATHS::GetStockTemplatesPath() );
 
     addVar( wxT( "KICAD_USER_TEMPLATE_DIR" ), PATHS::GetUserTemplatesPath() );
 

common/settings/settings_manager.cpp

@@ -387,6 +387,7 @@ wxString SETTINGS_MANAGER::GetPathForSettingsFile( JSON_SETTINGS* aSettings )
         return GetUserSettingsPath();
 
     case SETTINGS_LOC::PROJECT:
+        // TODO: MDI support
         return Prj().GetProjectPath();
 
     case SETTINGS_LOC::COLORS:
@@ -954,42 +955,48 @@ std::vector<wxString> SETTINGS_MANAGER::GetOpenProjects() const
 }
 
 
-bool SETTINGS_MANAGER::SaveProject( const wxString& aFullPath )
+bool SETTINGS_MANAGER::SaveProject( const wxString& aFullPath, PROJECT* aProject )
 {
+    if( !aProject )
+        aProject = &Prj();
+
     wxString path = aFullPath;
 
     if( path.empty() )
-        path = Prj().GetProjectFullName();
+        path = aProject->GetProjectFullName();
 
     // TODO: refactor for MDI
-    if( Prj().IsReadOnly() )
+    if( aProject->IsReadOnly() )
         return false;
 
     if( !m_project_files.count( path ) )
         return false;
 
     PROJECT_FILE* project     = m_project_files.at( path );
-    wxString      projectPath = GetPathForSettingsFile( project );
+    wxString      projectPath = aProject->GetProjectPath();
 
     project->SaveToFile( projectPath );
-    Prj().GetLocalSettings().SaveToFile( projectPath );
+    aProject->GetLocalSettings().SaveToFile( projectPath );
 
     return true;
 }
 
 
-void SETTINGS_MANAGER::SaveProjectAs( const wxString& aFullPath )
+void SETTINGS_MANAGER::SaveProjectAs( const wxString& aFullPath, PROJECT* aProject )
 {
-    wxString oldName = Prj().GetProjectFullName();
+    if( !aProject )
+        aProject = &Prj();
+
+    wxString oldName = aProject->GetProjectFullName();
 
     if( aFullPath.IsSameAs( oldName ) )
     {
-        SaveProject( aFullPath );
+        SaveProject( aFullPath, aProject );
         return;
     }
 
     // Changing this will cause UnloadProject to not save over the "old" project when loading below
-    Prj().setProjectFullName( aFullPath );
+    aProject->setProjectFullName( aFullPath );
 
     wxFileName fn( aFullPath );
 
@@ -997,14 +1004,14 @@ void SETTINGS_MANAGER::SaveProjectAs( const wxString& aFullPath )
 
     // Ensure read-only flags are copied; this allows doing a "Save As" on a standalong board/sch
     // without creating project files if the checkbox is turned off
-    project->SetReadOnly( Prj().IsReadOnly() );
-    Prj().GetLocalSettings().SetReadOnly( Prj().IsReadOnly() );
+    project->SetReadOnly( aProject->IsReadOnly() );
+    aProject->GetLocalSettings().SetReadOnly( aProject->IsReadOnly() );
 
     project->SetFilename( fn.GetName() );
     project->SaveToFile( fn.GetPath() );
 
-    Prj().GetLocalSettings().SetFilename( fn.GetName() );
-    Prj().GetLocalSettings().SaveToFile( fn.GetPath() );
+    aProject->GetLocalSettings().SetFilename( fn.GetName() );
+    aProject->GetLocalSettings().SaveToFile( fn.GetPath() );
 
     m_project_files[fn.GetFullPath()] = project;
     m_project_files.erase( oldName );
@@ -1014,9 +1021,12 @@ void SETTINGS_MANAGER::SaveProjectAs( const wxString& aFullPath )
 }
 
 
-void SETTINGS_MANAGER::SaveProjectCopy( const wxString& aFullPath )
+void SETTINGS_MANAGER::SaveProjectCopy( const wxString& aFullPath, PROJECT* aProject )
 {
-    PROJECT_FILE* project = m_project_files.at( Prj().GetProjectFullName() );
+    if( !aProject )
+        aProject = &Prj();
+
+    PROJECT_FILE* project = m_project_files.at( aProject->GetProjectFullName() );
     wxString      oldName = project->GetFilename();
     wxFileName    fn( aFullPath );
 
@@ -1027,9 +1037,11 @@ void SETTINGS_MANAGER::SaveProjectCopy( const wxString& aFullPath )
     project->SaveToFile( fn.GetPath() );
     project->SetFilename( oldName );
 
-    Prj().GetLocalSettings().SetFilename( fn.GetName() );
-    Prj().GetLocalSettings().SaveToFile( fn.GetPath() );
-    Prj().GetLocalSettings().SetFilename( oldName );
+    PROJECT_LOCAL_SETTINGS& localSettings = aProject->GetLocalSettings();
+
+    localSettings.SetFilename( fn.GetName() );
+    localSettings.SaveToFile( fn.GetPath() );
+    localSettings.SetFilename( oldName );
 
     project->SetReadOnly( readOnly );
 }

common/string_utils.cpp

@@ -50,6 +50,8 @@ wxString ConvertToNewOverbarNotation( const wxString& aOldStr )
     if( aOldStr == wxT( "~" ) )
         return aOldStr;
 
+    newStr.reserve( aOldStr.length() );
+
     for( wxString::const_iterator chIt = aOldStr.begin(); chIt != aOldStr.end(); ++chIt )
     {
         if( *chIt == '~' )
@@ -142,6 +144,8 @@ wxString EscapeString( const wxString& aSource, ESCAPE_CONTEXT aContext )
 {
     wxString converted;
 
+    converted.reserve( aSource.length() );
+
     for( wxUniChar c: aSource )
     {
         if( aContext == CTX_NETNAME )
@@ -232,8 +236,16 @@ wxString EscapeString( const wxString& aSource, ESCAPE_CONTEXT aContext )
 
 wxString UnescapeString( const wxString& aSource )
 {
+    size_t sourceLen = aSource.length();
+
+    // smallest escape string is three characters, shortcut everything else
+    if( sourceLen <= 2 )
+    {
+        return aSource;
+    }
+
     wxString newbuf;
-    size_t   sourceLen = aSource.length();
+    newbuf.reserve( sourceLen );
 
     for( size_t i = 0; i < sourceLen; ++i )
     {
@@ -305,6 +317,8 @@ wxString TitleCaps( const wxString& aString )
 
     wxStringSplit( aString, words, ' ' );
 
+    result.reserve( aString.length() );
+
     for( const wxString& word : words )
     {
         if( !result.IsEmpty() )
@@ -423,6 +437,8 @@ std::string EscapedUTF8( const wxString& aString )
 
     std::string ret;
 
+    ret.reserve( utf8.length() + 2 );
+
     ret += '"';
 
     for( std::string::const_iterator it = utf8.begin();  it!=utf8.end();  ++it )
@@ -454,6 +470,8 @@ wxString EscapeHTML( const wxString& aString )
 {
     wxString converted;
 
+    converted.reserve( aString.length() );
+
     for( wxUniChar c : aString )
     {
         if( c == '\"' )

common/tool/conditional_menu.cpp

@@ -144,20 +144,21 @@ void CONDITIONAL_MENU::Evaluate( SELECTION& aSelection )
         switch( entry.Type() )
         {
             case ENTRY::ACTION:
-                menuItem = Add( *entry.Action(), entry.IsCheckmarkEntry() );
+                Add( *entry.Action(), entry.IsCheckmarkEntry() );
                 menu_count++;
                 break;
 
             case ENTRY::MENU:
-                menuItem = Add( entry.Menu() );
+                entry.Menu()->UpdateTitle();
+                Add( entry.Menu() );
                 menu_count++;
                 break;
 
             case ENTRY::WXITEM:
                 menuItem = new wxMenuItem( this,
                                            entry.wxItem()->GetId(),
-                                           entry.wxItem()->GetItemLabel(),
-                                           entry.wxItem()->GetHelp(),
+                                           wxGetTranslation( entry.wxItem()->GetItemLabel() ),
+                                           wxGetTranslation( entry.wxItem()->GetHelp() ),
                                            entry.wxItem()->GetKind() );
 
                 if( !!entry.GetIcon() )
@@ -171,7 +172,7 @@ void CONDITIONAL_MENU::Evaluate( SELECTION& aSelection )
 
             case ENTRY::SEPARATOR:
                 if( menu_count )
-                    menuItem = AppendSeparator();
+                    AppendSeparator();
 
                 menu_count = 0;
                 break;

common/tool/grid_menu.cpp

@@ -37,7 +37,7 @@ GRID_MENU::GRID_MENU( EDA_DRAW_FRAME* aParent ) :
         ACTION_MENU( true ),
         m_parent( aParent )
 {
-    SetTitle( _( "Grid" ) );
+    UpdateTitle();
     SetIcon( BITMAPS::grid_select );
 
     APP_SETTINGS_BASE* settings = m_parent->config();
@@ -59,6 +59,12 @@ OPT_TOOL_EVENT GRID_MENU::eventHandler( const wxMenuEvent& aEvent )
 }
 
 
+void GRID_MENU::UpdateTitle()
+{
+    SetTitle( _( "Grid" ) );
+}
+
+
 void GRID_MENU::update()
 {
     APP_SETTINGS_BASE* settings = m_parent->config();

common/tool/zoom_menu.cpp

@@ -40,13 +40,8 @@ ZOOM_MENU::ZOOM_MENU( EDA_DRAW_FRAME* aParent ) :
         ACTION_MENU( true ),
         m_parent( aParent )
 {
-    SetTitle( _( "Zoom" ) );
+    UpdateTitle();
     SetIcon( BITMAPS::zoom_selection );
-
-    int i = ID_POPUP_ZOOM_LEVEL_START + 1;  // 0 reserved for menus which support auto-zoom
-
-    for( double factor : m_parent->config()->m_Window.zoom_factors )
-        Append( i++, wxString::Format( _( "Zoom: %.2f" ), factor ), wxEmptyString, wxITEM_CHECK );
 }
 
 
@@ -58,17 +53,30 @@ OPT_TOOL_EVENT ZOOM_MENU::eventHandler( const wxMenuEvent& aEvent )
 }
 
 
+void ZOOM_MENU::UpdateTitle()
+{
+    SetTitle( _( "Zoom" ) );
+}
+
+
 void ZOOM_MENU::update()
 {
+    Clear();
+
+    int ii = ID_POPUP_ZOOM_LEVEL_START + 1;  // 0 reserved for menus which support auto-zoom
+
+    for( double factor : m_parent->config()->m_Window.zoom_factors )
+        Append( ii++, wxString::Format( _( "Zoom: %.2f" ), factor ), wxEmptyString, wxITEM_CHECK );
+
     double zoom = m_parent->GetCanvas()->GetGAL()->GetZoomFactor();
 
     const std::vector<double>& zoomList = m_parent->config()->m_Window.zoom_factors;
 
-    for( size_t i = 0; i < zoomList.size(); ++i )
+    for( size_t jj = 0; jj < zoomList.size(); ++jj )
     {
         // Search for a value near the current zoom setting:
-        double rel_error = std::fabs( zoomList[i] - zoom ) / zoom;
+        double rel_error = std::fabs( zoomList[jj] - zoom ) / zoom;
         // IDs start with 1 (leaving 0 for auto-zoom)
-        Check( ID_POPUP_ZOOM_LEVEL_START + i + 1, rel_error < 0.1 );
+        Check( ID_POPUP_ZOOM_LEVEL_START + jj + 1, rel_error < 0.1 );
     }
 }

common/widgets/bitmap_toggle.cpp

@@ -1,7 +1,7 @@
 /*
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
- * Copyright (C) 2020 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 2020-2022 KiCad Developers, see AUTHORS.txt for contributors.
  * @author Jon Evans <jon@craftyjon.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -26,6 +26,7 @@
 
 #include <wx/sizer.h>
 #include <wx/statbmp.h>
+#include <wx/timer.h>
 
 wxDEFINE_EVENT( TOGGLE_CHANGED, wxCommandEvent );
 
@@ -35,7 +36,8 @@ BITMAP_TOGGLE::BITMAP_TOGGLE( wxWindow *aParent, wxWindowID aId, const wxBitmap&
         wxPanel( aParent, aId ),
         m_checked( aChecked ),
         m_unchecked_bitmap( aUncheckedBitmap ),
-        m_checked_bitmap( aCheckedBitmap )
+        m_checked_bitmap( aCheckedBitmap ),
+        m_debounce( 0 )
 {
     wxBoxSizer* sizer = new wxBoxSizer( wxHORIZONTAL );
     SetSizer( sizer );
@@ -47,13 +49,21 @@ BITMAP_TOGGLE::BITMAP_TOGGLE( wxWindow *aParent, wxWindowID aId, const wxBitmap&
     sizer->Add( m_bitmap, 0, 0 );
 
     m_bitmap->Bind( wxEVT_LEFT_UP,
-                    [&]( wxMouseEvent& )
+                    [&]( wxMouseEvent& event )
                     {
+                        wxLongLong now = wxGetLocalTimeMillis();
+
+                        if( now - m_debounce < 50 )
+                            return;
+                        else
+                            m_debounce = now;
+
                         SetValue( !GetValue() );
-                        wxCommandEvent event( TOGGLE_CHANGED );
-                        event.SetInt( m_checked );
-                        event.SetEventObject( this );
-                        wxPostEvent( this, event );
+
+                        wxCommandEvent command( TOGGLE_CHANGED );
+                        command.SetInt( m_checked );
+                        command.SetEventObject( this );
+                        wxPostEvent( this, command );
                     } );
 
     auto passOnEvent =

common/widgets/grid_text_button_helpers.cpp

@@ -59,10 +59,17 @@ wxString GRID_CELL_TEXT_BUTTON::GetValue() const
 void GRID_CELL_TEXT_BUTTON::SetSize( const wxRect& aRect )
 {
     wxRect rect( aRect );
-    rect.Inflate( -1 );
 
 #if defined( __WXMAC__ )
-    rect.Inflate( 3 );      // no FOCUS_RING, even on Mac
+    rect.Inflate( 2 );      // ignore FOCUS_RING
+#elif defined( __WXGTK__ )
+    rect.Inflate( -3 );     // The -3 is a very sad hack here.  Some GTK themes overrun the
+                            // default -1, preventing display.  Unfortunately, we don't appear to
+                            // have a good method of finding the current margin needed.
+                            // Some GTK resize events seem to update the cell size but not all and
+                            // not consistently.
+#else
+    rect.Inflate( -1 );
 #endif
 
     Combo()->SetSize( rect, wxSIZE_ALLOW_MINUS_ONE );

common/widgets/msgpanel.cpp

@@ -63,7 +63,7 @@ EDA_MSG_PANEL::~EDA_MSG_PANEL()
 int EDA_MSG_PANEL::GetRequiredHeight( wxWindow* aWindow )
 {
     wxSize     fontSizeInPixels;
-    wxScreenDC dc;
+    wxWindowDC dc( aWindow );
 
     dc.SetFont( KIUI::GetControlFont( aWindow ) );
     dc.GetTextExtent( wxT( "W" ), &fontSizeInPixels.x, &fontSizeInPixels.y );

common/widgets/net_selector.cpp

@@ -335,7 +335,12 @@ protected:
             }
         }
 
-        std::sort( netNames.begin(), netNames.end() );
+        std::sort( netNames.begin(), netNames.end(),
+                []( const wxString& lhs, const wxString& rhs )
+                {
+                    return StrNumCmp( lhs, rhs, true /* ignore case */ ) < 0;
+                } );
+
 
         // Special handling for <no net>
         if( filter.IsEmpty() || wxString( NO_NET ).MakeLower().Matches( filter ) )

common/widgets/progress_reporter_base.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2017 CERN
- * Copyright (C) 2021 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 2021-2022 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * Author: Tomasz Wlostowski <tomasz.wlostowski@cern.ch>
  *
@@ -121,7 +121,7 @@ bool PROGRESS_REPORTER_BASE::KeepRefreshing( bool aWait )
                 return false;
             }
 
-            wxMilliSleep( 20 );
+            wxMilliSleep( 33 /* 30 FPS refresh rate */ );
         }
 
         return true;

eeschema/CMakeLists.txt

@@ -175,7 +175,7 @@ set( EESCHEMA_SRCS
     fields_grid_table.cpp
     files-io.cpp
     generate_alias_info.cpp
-    getpart.cpp
+    picksymbol.cpp
     hierarch.cpp
     lib_shape.cpp
     lib_item.cpp

eeschema/autoplace_fields.cpp

@@ -144,14 +144,14 @@ public:
      */
     void DoAutoplace( bool aManual )
     {
-        bool            force_wire_spacing = false;
+        bool            forceWireSpacing = false;
         SIDE_AND_NPINS  sideandpins = chooseSideForFields( aManual );
         SIDE            field_side = sideandpins.side;
         wxPoint         fbox_pos = fieldBoxPlacement( sideandpins );
         EDA_RECT        field_box( fbox_pos, m_fbox_size );
 
         if( aManual )
-            force_wire_spacing = fitFieldsBetweenWires( &field_box, field_side );
+            forceWireSpacing = fitFieldsBetweenWires( &field_box, field_side );
 
         // Move the fields
         int last_y_coord = field_box.GetTop();
@@ -160,6 +160,9 @@ public:
         {
             SCH_FIELD* field = m_fields[field_idx];
 
+            if( !field->IsVisible() )
+                continue;
+
             if( m_allow_rejustify )
             {
                 if( sideandpins.pins > 0 )
@@ -175,8 +178,8 @@ public:
                 }
             }
 
-            wxPoint pos( fieldHorizPlacement( field, field_box ),
-                         fieldVertPlacement( field, field_box, &last_y_coord, !force_wire_spacing ) );
+            wxPoint pos( fieldHPlacement( field, field_box ),
+                         fieldVPlacement( field, field_box, &last_y_coord, !forceWireSpacing ) );
 
             if( m_align_to_grid )
             {
@@ -201,7 +204,15 @@ protected:
         int max_field_width = 0;
         int total_height = 0;
 
+        std::vector<SCH_FIELD*> visibleFields;
+
         for( SCH_FIELD* field : m_fields )
+        {
+            if( field->IsVisible() )
+                visibleFields.push_back( field );
+        }
+
+        for( SCH_FIELD* field : visibleFields )
         {
             if( m_symbol->GetTransform().y1 )
                 field->SetTextAngle( TEXT_ANGLE_VERT );
@@ -215,7 +226,7 @@ protected:
             max_field_width = std::max( max_field_width, field_width );
 
             // Remove interline spacing from field_height for last line.
-            if( field == m_fields[ m_fields.size() - 1 ] )
+            if( field == visibleFields.back() )
                 field_height *= 0.62;
 
             if( !aDynamic )
@@ -322,6 +333,7 @@ protected:
             if( item_box.Intersects( aRect ) )
                 filtered.push_back( item );
         }
+
         return filtered;
     }
 
@@ -642,7 +654,7 @@ protected:
      *
      * @return Correct field horizontal position
      */
-    int fieldHorizPlacement( SCH_FIELD *aField, const EDA_RECT &aFieldBox )
+    int fieldHPlacement( SCH_FIELD *aField, const EDA_RECT &aFieldBox )
     {
         int field_hjust;
         int field_xcoord;
@@ -677,13 +689,13 @@ protected:
      *
      * @param aField - the field to place.
      * @param aFieldBox - box in which fields will be placed.
-     * @param aPosAccum - pointer to a position accumulator
+     * @param aAccumulatedPosition - pointer to a position accumulator
      * @param aDynamic - use dynamic spacing
      *
      * @return Correct field vertical position
      */
-    int fieldVertPlacement( SCH_FIELD *aField, const EDA_RECT &aFieldBox, int *aPosAccum,
-                            bool aDynamic )
+    int fieldVPlacement( SCH_FIELD *aField, const EDA_RECT &aFieldBox, int *aAccumulatedPosition,
+                         bool aDynamic )
     {
         int field_height;
         int padding;
@@ -704,9 +716,9 @@ protected:
             padding = FIELD_PADDING;
         }
 
-        int placement = *aPosAccum + padding / 2 + field_height / 2;
+        int placement = *aAccumulatedPosition + padding / 2 + field_height / 2;
 
-        *aPosAccum += padding + field_height;
+        *aAccumulatedPosition += padding + field_height;
 
         return placement;
     }

eeschema/connection_graph.cpp

@@ -366,6 +366,9 @@ void CONNECTION_SUBGRAPH::UpdateItemConnections()
     {
         SCH_CONNECTION* item_conn = item->GetOrInitConnection( m_sheet, m_graph );
 
+        if( !item_conn )
+            continue;
+
         if( ( m_driver_connection->IsBus() && item_conn->IsNet() ) ||
             ( m_driver_connection->IsNet() && item_conn->IsBus() ) )
         {
@@ -625,8 +628,8 @@ void CONNECTION_GRAPH::updateItemConnectivity( const SCH_SHEET_PATH& aSheet,
                         else
                             bus_entry->m_connected_bus_items[1] = busLine;
 
-                        bus_entry->ConnectedItems( aSheet ).insert( busLine );
-                        busLine->ConnectedItems( aSheet ).insert( bus_entry );
+                        bus_entry->AddConnectionTo( aSheet, busLine );
+                        busLine->AddConnectionTo( aSheet, bus_entry );
                     }
                 }
             }
@@ -670,8 +673,8 @@ void CONNECTION_GRAPH::updateItemConnectivity( const SCH_SHEET_PATH& aSheet,
                     test_item->ConnectionPropagatesTo( connected_item ) &&
                     bus_connection_ok )
                 {
-                    connected_item->ConnectedItems( aSheet ).insert( test_item );
-                    test_item->ConnectedItems( aSheet ).insert( connected_item );
+                    connected_item->AddConnectionTo( aSheet, test_item );
+                    test_item->AddConnectionTo( aSheet, connected_item );
                 }
             }
 
@@ -696,31 +699,8 @@ void CONNECTION_GRAPH::updateItemConnectivity( const SCH_SHEET_PATH& aSheet,
 }
 
 
-// TODO(JE) This won't give the same subgraph IDs (and eventually net/graph codes)
-// to the same subgraph necessarily if it runs over and over again on the same
-// sheet.  We need:
-//
-//  a) a cache of net/bus codes, like used before
-//  b) to persist the CONNECTION_GRAPH globally so the cache is persistent,
-//  c) some way of trying to avoid changing net names.  so we should keep track
-//     of the previous driver of a net, and if it comes down to choosing between
-//     equally-prioritized drivers, choose the one that already exists as a driver
-//     on some portion of the items.
-
-
-void CONNECTION_GRAPH::buildConnectionGraph()
+void CONNECTION_GRAPH::buildItemSubGraphs()
 {
-    // Recache all bus aliases for later use
-    wxCHECK_RET( m_schematic, wxT( "Connection graph cannot be built without schematic pointer" ) );
-
-    SCH_SHEET_LIST all_sheets = m_schematic->GetSheets();
-
-    for( unsigned i = 0; i < all_sheets.size(); i++ )
-    {
-        for( const auto& alias : all_sheets[i].LastScreen()->GetBusAliases() )
-            m_bus_alias_cache[ alias->GetName() ] = alias;
-    }
-
     // Build subgraphs from items (on a per-sheet basis)
 
     for( SCH_ITEM* item : m_items )
@@ -742,21 +722,25 @@ void CONNECTION_GRAPH::buildConnectionGraph()
                 connection->SetSubgraphCode( subgraph->m_code );
                 m_item_to_subgraph_map[item] = subgraph;
 
-                std::list<SCH_ITEM*> members;
+                std::list<SCH_ITEM*> memberlist;
 
                 auto get_items =
                         [&]( SCH_ITEM* aItem ) -> bool
                         {
                             SCH_CONNECTION* conn = aItem->GetOrInitConnection( sheet, this );
+                            bool unique = !( aItem->GetFlags() & CANDIDATE );
 
-                            return ( conn->SubgraphCode() == 0 );
+                            aItem->SetFlags( CANDIDATE );
+
+                            return ( unique && conn && ( conn->SubgraphCode() == 0 ) );
                         };
 
+
                 std::copy_if( item->ConnectedItems( sheet ).begin(),
                               item->ConnectedItems( sheet ).end(),
-                              std::back_inserter( members ), get_items );
+                              std::back_inserter( memberlist ), get_items );
 
-                for( SCH_ITEM* connected_item : members )
+                for( SCH_ITEM* connected_item : memberlist )
                 {
                     if( connected_item->Type() == SCH_NO_CONNECT_T )
                         subgraph->m_no_connect = connected_item;
@@ -770,24 +754,26 @@ void CONNECTION_GRAPH::buildConnectionGraph()
                         connected_conn->SetSubgraphCode( subgraph->m_code );
                         m_item_to_subgraph_map[connected_item] = subgraph;
                         subgraph->AddItem( connected_item );
+                        SCH_ITEM_SET citemset = connected_item->ConnectedItems( sheet );
 
-                        std::copy_if( connected_item->ConnectedItems( sheet ).begin(),
-                                      connected_item->ConnectedItems( sheet ).end(),
-                                      std::back_inserter( members ), get_items );
+                        std::copy_if( citemset.begin(), citemset.end(),
+                                      std::back_inserter( memberlist ), get_items );
                     }
                 }
 
+                for( SCH_ITEM* connected_item : memberlist )
+                    connected_item->ClearFlags( CANDIDATE );
+
                 subgraph->m_dirty = true;
                 m_subgraphs.push_back( subgraph );
             }
         }
     }
 
-    /**
-     * TODO(JE): Net codes are non-deterministic.  Fortunately, they are also not really used for
-     * anything. We should consider removing them entirely and just using net names everywhere.
-     */
+}
 
+void CONNECTION_GRAPH::resolveAllDrivers()
+{
     // Resolve drivers for subgraphs and propagate connectivity info
 
     // We don't want to spin up a new thread for fewer than 8 nets (overhead costs)
@@ -867,7 +853,11 @@ void CONNECTION_GRAPH::buildConnectionGraph()
                   {
                       return candidate->m_driver;
                   } );
+}
 
+
+void CONNECTION_GRAPH::collectAllDriverValues()
+{
     // Check for subgraphs with the same net name but only weak drivers.
     // For example, two wires that are both connected to hierarchical
     // sheet pins that happen to have the same name, but are not the same.
@@ -922,7 +912,11 @@ void CONNECTION_GRAPH::buildConnectionGraph()
             }
         }
     }
+}
 
+
+void CONNECTION_GRAPH::generateInvisiblePinSubGraphs()
+{
     // Generate subgraphs for invisible power pins.  These will be merged with other subgraphs
     // on the same sheet in the next loop.
 
@@ -942,7 +936,7 @@ void CONNECTION_GRAPH::buildConnectionGraph()
         SCH_CONNECTION* connection = pin->GetOrInitConnection( sheet, this );
 
         // If this pin already has a subgraph, don't need to process
-        if( connection->SubgraphCode() > 0 )
+        if( !connection || connection->SubgraphCode() > 0 )
             continue;
 
         connection->SetName( pin->GetShownName() );
@@ -979,7 +973,11 @@ void CONNECTION_GRAPH::buildConnectionGraph()
 
         connection->SetSubgraphCode( subgraph->m_code );
     }
+}
 
+
+void CONNECTION_GRAPH::processSubGraphs()
+{
     // Here we do all the local (sheet) processing of each subgraph, including assigning net
     // codes, merging subgraphs together that use label connections, etc.
 
@@ -1306,6 +1304,49 @@ void CONNECTION_GRAPH::buildConnectionGraph()
                     subgraph->m_driver_connection->Name() );
     }
 
+}
+
+
+// TODO(JE) This won't give the same subgraph IDs (and eventually net/graph codes)
+// to the same subgraph necessarily if it runs over and over again on the same
+// sheet.  We need:
+//
+//  a) a cache of net/bus codes, like used before
+//  b) to persist the CONNECTION_GRAPH globally so the cache is persistent,
+//  c) some way of trying to avoid changing net names.  so we should keep track
+//     of the previous driver of a net, and if it comes down to choosing between
+//     equally-prioritized drivers, choose the one that already exists as a driver
+//     on some portion of the items.
+
+
+void CONNECTION_GRAPH::buildConnectionGraph()
+{
+    // Recache all bus aliases for later use
+    wxCHECK_RET( m_schematic, wxT( "Connection graph cannot be built without schematic pointer" ) );
+
+    SCH_SHEET_LIST all_sheets = m_schematic->GetSheets();
+
+    for( unsigned i = 0; i < all_sheets.size(); i++ )
+    {
+        for( const auto& alias : all_sheets[i].LastScreen()->GetBusAliases() )
+            m_bus_alias_cache[ alias->GetName() ] = alias;
+    }
+
+    buildItemSubGraphs();
+
+    /**
+     * TODO(JE): Net codes are non-deterministic.  Fortunately, they are also not really used for
+     * anything. We should consider removing them entirely and just using net names everywhere.
+     */
+
+    resolveAllDrivers();
+
+    collectAllDriverValues();
+
+    generateInvisiblePinSubGraphs();
+
+    processSubGraphs();
+
     // Absorbed subgraphs should no longer be considered
     alg::delete_if( m_driver_subgraphs, [&]( const CONNECTION_SUBGRAPH* candidate ) -> bool
                                         {
@@ -1328,7 +1369,13 @@ void CONNECTION_GRAPH::buildConnectionGraph()
         m_sheet_to_subgraphs_map[ subgraph->m_sheet ].emplace_back( subgraph );
 
     // Update item connections at this point so that neighbor propagation works
-    nextSubgraph.store( 0 );
+    std::atomic<size_t> nextSubgraph( 0 );
+
+    // We don't want to spin up a new thread for fewer than 8 nets (overhead costs)
+    size_t parallelThreadCount = std::min<size_t>( std::thread::hardware_concurrency(),
+            ( m_subgraphs.size() + 3 ) / 4 );
+
+    std::vector<std::future<size_t>> returns( parallelThreadCount );
 
     auto preliminaryUpdateTask =
             [&]() -> size_t
@@ -1901,7 +1948,7 @@ void CONNECTION_GRAPH::propagateToNeighbors( CONNECTION_SUBGRAPH* aSubgraph )
     // member to have the correct connection info
     if( conn->IsBus() && !stale_bus_members.empty() )
     {
-        for( auto stale_member : stale_bus_members )
+        for( SCH_CONNECTION* stale_member : stale_bus_members )
         {
             for( CONNECTION_SUBGRAPH* subgraph : visited )
             {
@@ -1933,13 +1980,13 @@ void CONNECTION_GRAPH::propagateToNeighbors( CONNECTION_SUBGRAPH* aSubgraph )
 std::shared_ptr<SCH_CONNECTION> CONNECTION_GRAPH::getDefaultConnection( SCH_ITEM* aItem,
         CONNECTION_SUBGRAPH* aSubgraph )
 {
-    auto c = std::shared_ptr<SCH_CONNECTION>( nullptr );
+    std::shared_ptr<SCH_CONNECTION> c = std::shared_ptr<SCH_CONNECTION>( nullptr );
 
     switch( aItem->Type() )
     {
     case SCH_PIN_T:
     {
-        auto pin = static_cast<SCH_PIN*>( aItem );
+        SCH_PIN* pin = static_cast<SCH_PIN*>( aItem );
 
         if( pin->IsPowerConnection() )
             c = std::make_shared<SCH_CONNECTION>( aItem, aSubgraph->m_sheet );
@@ -1981,7 +2028,7 @@ SCH_CONNECTION* CONNECTION_GRAPH::matchBusMember( SCH_CONNECTION* aBusConnection
         // Vector bus: compare against index, because we allow the name
         // to be different
 
-        for( const auto& bus_member : aBusConnection->Members() )
+        for( const std::shared_ptr<SCH_CONNECTION>& bus_member : aBusConnection->Members() )
         {
             if( bus_member->VectorIndex() == aSearch->VectorIndex() )
             {
@@ -1993,14 +2040,14 @@ SCH_CONNECTION* CONNECTION_GRAPH::matchBusMember( SCH_CONNECTION* aBusConnection
     else
     {
         // Group bus
-        for( const auto& c : aBusConnection->Members() )
+        for( const std::shared_ptr<SCH_CONNECTION>& c : aBusConnection->Members() )
         {
             // Vector inside group: compare names, because for bus groups
             // we expect the naming to be consistent across all usages
             // TODO(JE) explain this in the docs
             if( c->Type() == CONNECTION_TYPE::BUS )
             {
-                for( const auto& bus_member : c->Members() )
+                for( const std::shared_ptr<SCH_CONNECTION>& bus_member : c->Members() )
                 {
                     if( bus_member->LocalName() == aSearch->LocalName() )
                     {
@@ -2051,7 +2098,7 @@ std::vector<const CONNECTION_SUBGRAPH*> CONNECTION_GRAPH::GetBusesNeedingMigrati
 {
     std::vector<const CONNECTION_SUBGRAPH*> ret;
 
-    for( auto&& subgraph : m_subgraphs )
+    for( CONNECTION_SUBGRAPH* subgraph : m_subgraphs )
     {
         // Graph is supposed to be up-to-date before calling this
         wxASSERT( !subgraph->m_dirty );
@@ -2313,8 +2360,8 @@ bool CONNECTION_GRAPH::ercCheckMultipleDrivers( const CONNECTION_SUBGRAPH* aSubg
 
 bool CONNECTION_GRAPH::ercCheckBusToNetConflicts( const CONNECTION_SUBGRAPH* aSubgraph )
 {
-    auto sheet = aSubgraph->m_sheet;
-    auto screen = sheet.LastScreen();
+    const SCH_SHEET_PATH& sheet = aSubgraph->m_sheet;
+    SCH_SCREEN* screen = sheet.LastScreen();
 
     SCH_ITEM* net_item = nullptr;
     SCH_ITEM* bus_item = nullptr;
@@ -2371,8 +2418,8 @@ bool CONNECTION_GRAPH::ercCheckBusToNetConflicts( const CONNECTION_SUBGRAPH* aSu
 bool CONNECTION_GRAPH::ercCheckBusToBusConflicts( const CONNECTION_SUBGRAPH* aSubgraph )
 {
     wxString msg;
-    auto sheet = aSubgraph->m_sheet;
-    auto screen = sheet.LastScreen();
+    const SCH_SHEET_PATH& sheet = aSubgraph->m_sheet;
+    SCH_SCREEN* screen = sheet.LastScreen();
 
     SCH_ITEM* label = nullptr;
     SCH_ITEM* port = nullptr;
@@ -2440,8 +2487,8 @@ bool CONNECTION_GRAPH::ercCheckBusToBusConflicts( const CONNECTION_SUBGRAPH* aSu
 bool CONNECTION_GRAPH::ercCheckBusToBusEntryConflicts( const CONNECTION_SUBGRAPH* aSubgraph )
 {
     bool conflict = false;
-    auto sheet = aSubgraph->m_sheet;
-    auto screen = sheet.LastScreen();
+    const SCH_SHEET_PATH& sheet = aSubgraph->m_sheet;
+    SCH_SCREEN* screen = sheet.LastScreen();
 
     SCH_BUS_WIRE_ENTRY* bus_entry = nullptr;
     SCH_ITEM* bus_wire = nullptr;
@@ -2453,7 +2500,7 @@ bool CONNECTION_GRAPH::ercCheckBusToBusEntryConflicts( const CONNECTION_SUBGRAPH
         return true;
     }
 
-    for( auto item : aSubgraph->m_items )
+    for( SCH_ITEM* item : aSubgraph->m_items )
     {
         switch( item->Type() )
         {
@@ -2509,7 +2556,9 @@ bool CONNECTION_GRAPH::ercCheckBusToBusEntryConflicts( const CONNECTION_SUBGRAPH
     // or global label
     if( conflict && CONNECTION_SUBGRAPH::GetDriverPriority( aSubgraph->m_driver )
                        >= CONNECTION_SUBGRAPH::PRIORITY::POWER_PIN )
+    {
         conflict = false;
+    }
 
     if( conflict )
     {
@@ -2653,8 +2702,8 @@ bool CONNECTION_GRAPH::ercCheckNoConnects( const CONNECTION_SUBGRAPH* aSubgraph
             wxString name = pin->Connection( &sheet )->Name();
             wxString local_name = pin->Connection( &sheet )->Name( true );
 
-            if( m_global_label_cache.count( name )  ||
-                ( m_local_label_cache.count( std::make_pair( sheet, local_name ) ) ) )
+            if( m_global_label_cache.count( name )
+                    || m_local_label_cache.count( std::make_pair( sheet, local_name ) ) )
             {
                 has_other_connections = true;
             }
@@ -2787,7 +2836,7 @@ bool CONNECTION_GRAPH::ercCheckLabels( const CONNECTION_SUBGRAPH* aSubgraph )
                 return false;
             };
 
-    for( auto item : aSubgraph->m_items )
+    for( SCH_ITEM* item : aSubgraph->m_items )
     {
         switch( item->Type() )
         {
@@ -2837,9 +2886,9 @@ bool CONNECTION_GRAPH::ercCheckLabels( const CONNECTION_SUBGRAPH* aSubgraph )
 
     if( isGlobal )
     {
-        // This will be set to true if the global is connected to a pin above, but we
-        // want to reset this to false so that globals get flagged if they only have a
-        // single instance connected to a single pin
+        // This will be set to true if the global is connected to a pin above, but we want to
+        // reset this to false so that globals get flagged if they only have a single instance
+        // connected to a single pin
         hasOtherConnections = ( pinCount > 1 );
 
         auto it = m_net_name_to_subgraphs_map.find( name );
@@ -2853,9 +2902,9 @@ bool CONNECTION_GRAPH::ercCheckLabels( const CONNECTION_SUBGRAPH* aSubgraph )
     else if( text->Type() == SCH_HIER_LABEL_T )
     {
         // For a hier label, check if the parent pin is connected
-        if( aSubgraph->m_hier_parent &&
-            ( aSubgraph->m_hier_parent->m_strong_driver ||
-                aSubgraph->m_hier_parent->m_drivers.size() > 1) )
+        if( aSubgraph->m_hier_parent
+                && ( aSubgraph->m_hier_parent->m_strong_driver
+                        || aSubgraph->m_hier_parent->m_drivers.size() > 1) )
         {
             // For now, a simple check: if there is more than one driver, the parent is probably
             // connected elsewhere (because at least one driver will be the hier pin itself)

eeschema/connection_graph.h

@@ -370,6 +370,33 @@ private:
      */
     void buildConnectionGraph();
 
+    /**
+     * Generates individual item subgraphs on a per-sheet basis
+     */
+    void buildItemSubGraphs();
+
+    /**
+     * Finds all subgraphs in the connection graph and calls ResolveDrivers() in
+     * parallel
+     */
+    void resolveAllDrivers();
+
+    /**
+     * Maps the driver values for each subgraph
+     */
+    void collectAllDriverValues();
+
+    /**
+     * Iterate through the invisible power pins to collect the global labels
+     * as drivers
+     */
+    void generateInvisiblePinSubGraphs();
+
+    /**
+     * Process all subgraphs to assign netcodes and merge subgraphs based on labels
+     */
+    void processSubGraphs();
+
     /**
      * Helper to assign a new net code to a connection
      *

eeschema/dialogs/dialog_lib_edit_pin_table.cpp

@@ -621,6 +621,7 @@ void DIALOG_LIB_EDIT_PIN_TABLE::OnAddRow( wxCommandEvent& event )
         newPin->SetOrientation( last->GetOrientation() );
         newPin->SetType( last->GetType() );
         newPin->SetShape( last->GetShape() );
+        newPin->SetParent( last->GetParent() );
 
         wxPoint pos = last->GetPosition();
 

eeschema/dialogs/dialog_lib_symbol_properties.cpp

@@ -455,10 +455,16 @@ void DIALOG_LIB_SYMBOL_PROPERTIES::OnSymbolNameText( wxCommandEvent& event )
 
 void DIALOG_LIB_SYMBOL_PROPERTIES::OnSymbolNameKillFocus( wxFocusEvent& event )
 {
-    if( !m_delayedFocusCtrl && !m_SymbolNameCtrl->GetValidator()->Validate( m_SymbolNameCtrl ) )
+    if( !m_delayedFocusCtrl )
     {
+        // If the validation fails and we throw up a dialog then GTK will give us another
+        // KillFocus event and we end up in infinite recursion.  So we use m_delayedFocusCtrl
+        // as a re-entrancy block and then clear it again if validation passes.
         m_delayedFocusCtrl = m_SymbolNameCtrl;
         m_delayedFocusPage = 0;
+
+        if( m_SymbolNameCtrl->GetValidator()->Validate( m_SymbolNameCtrl ) )
+            m_delayedFocusCtrl = nullptr;
     }
 
     event.Skip();
@@ -593,7 +599,7 @@ void DIALOG_LIB_SYMBOL_PROPERTIES::OnEditSpiceModel( wxCommandEvent& event )
 {
 #ifdef KICAD_SPICE
     int diff = m_fields->size();
-    auto symbol = SCH_SYMBOL( *m_libEntry, m_libEntry->GetLibId(), nullptr );
+    auto symbol = SCH_SYMBOL( *m_libEntry, m_libEntry->GetLibId(), nullptr, 0 );
 
     DIALOG_SPICE_MODEL dialog( this, symbol, m_fields );
 

eeschema/dialogs/dialog_netlist.cpp

@@ -168,7 +168,6 @@ private:
 
 public:
     SCH_EDIT_FRAME*      m_Parent;
-    wxString             m_DefaultNetFmtName;
     NETLIST_PAGE_DIALOG* m_PanelNetType[4 + CUSTOMPANEL_COUNTMAX];
 };
 
@@ -217,11 +216,7 @@ NETLIST_PAGE_DIALOG::NETLIST_PAGE_DIALOG( wxNotebook* parent, const wxString& ti
     m_TitleStringCtrl     = nullptr;
     m_AdjustPassiveValues = nullptr;
 
-    wxString netfmtName = static_cast<NETLIST_DIALOG*>( parent->GetParent() )->m_DefaultNetFmtName;
-
-    bool selected = m_pageNetFmtName == netfmtName;
-
-    parent->AddPage( this, title, selected );
+    parent->AddPage( this, title, false );
 
     wxBoxSizer* MainBoxSizer = new wxBoxSizer( wxVERTICAL );
     SetSizer( MainBoxSizer );
@@ -246,8 +241,6 @@ NETLIST_DIALOG::NETLIST_DIALOG( SCH_EDIT_FRAME* parent ) :
 
     SCHEMATIC_SETTINGS& settings = m_Parent->Schematic().Settings();
 
-    m_DefaultNetFmtName = settings.m_NetFormatName;
-
     for( NETLIST_PAGE_DIALOG*& page : m_PanelNetType)
         page = nullptr;
 
@@ -271,6 +264,15 @@ NETLIST_DIALOG::NETLIST_DIALOG( SCH_EDIT_FRAME* parent ) :
 
     m_sdbSizer2OK->SetDefault();
 
+    for( int ii = 0; m_PanelNetType[ii] && ii < 4 + CUSTOMPANEL_COUNTMAX; ++ii )
+    {
+        if( m_PanelNetType[ii]->GetPageNetFmtName() == settings.m_NetFormatName )
+        {
+            m_NoteBook->ChangeSelection( ii );
+            break;
+        }
+    }
+
     // Now all widgets have the size fixed, call FinishDialogSettings
     finishDialogSettings();
 }
@@ -416,8 +418,6 @@ void NETLIST_DIALOG::OnNetlistTypeSelection( wxNotebookEvent& event )
     if( currPage == nullptr )
         return;
 
-    m_DefaultNetFmtName = currPage->GetPageNetFmtName();
-
     m_buttonDelGenerator->Enable( currPage->m_IdNetType >= NET_TYPE_CUSTOM1 );
 }
 
@@ -431,8 +431,7 @@ void NETLIST_DIALOG::NetlistUpdateOpt()
 
     settings.m_SpiceAdjustPassiveValues = adjust;
     settings.m_SpiceCommandString       = spice_cmd_string;
-    settings.m_NetFormatName            = wxEmptyString;
-    settings.m_NetFormatName            = m_DefaultNetFmtName;
+    settings.m_NetFormatName            = m_PanelNetType[m_NoteBook->GetSelection()]->GetPageNetFmtName();
 }
 
 
@@ -591,7 +590,6 @@ void NETLIST_DIALOG::OnDelGenerator( wxCommandEvent& event )
 
     currPage->m_CommandStringCtrl->SetValue( wxEmptyString );
     currPage->m_TitleStringCtrl->SetValue( wxEmptyString );
-    m_DefaultNetFmtName = m_PanelNetType[PANELPCBNEW]->GetPageNetFmtName();
 
     WriteCurrentNetlistSetup();
 
@@ -718,17 +716,8 @@ int InvokeDialogNetList( SCH_EDIT_FRAME* aCaller )
 {
     NETLIST_DIALOG dlg( aCaller );
 
-    SCHEMATIC_SETTINGS& settings = aCaller->Schematic().Settings();
-
-    wxString curr_default_netformat = settings.m_NetFormatName;
-
     int ret = dlg.ShowModal();
-
-    // Update the default netlist and store it in prj config if it was explicitly changed.
-    settings.m_NetFormatName = dlg.m_DefaultNetFmtName; // can have temporary changed
-
-    if( curr_default_netformat != dlg.m_DefaultNetFmtName )
-        aCaller->SaveProjectSettings();
+    aCaller->SaveProjectSettings();
 
     return ret;
 }

eeschema/dialogs/dialog_symbol_properties.cpp

@@ -700,8 +700,19 @@ bool DIALOG_SYMBOL_PROPERTIES::TransferDataFromWindow()
     m_symbol->SetIncludeInBom( !m_cbExcludeFromBom->IsChecked() );
     m_symbol->SetIncludeOnBoard( !m_cbExcludeFromBoard->IsChecked() );
 
-    // The value, footprint and datasheet fields and exclude from bill of materials setting
-    // should be kept in sync in multi-unit parts.
+    // Update any assignments
+    if( m_dataModel )
+    {
+        for( const SCH_PIN& model_pin : *m_dataModel )
+        {
+            // map from the edited copy back to the "real" pin in the symbol.
+            SCH_PIN* src_pin = m_symbol->GetPin( model_pin.GetLibPin() );
+            src_pin->SetAlt( model_pin.GetAlt() );
+        }
+    }
+
+    // Keep fields other than the reference, include/exclude flags, and alternate pin assignements
+    // in sync in multi-unit parts.
     if( m_symbol->GetUnitCount() > 1 && m_symbol->IsAnnotated( &GetParent()->GetCurrentSheet() ) )
     {
         wxString ref = m_symbol->GetRef( &GetParent()->GetCurrentSheet() );
@@ -722,25 +733,49 @@ bool DIALOG_SYMBOL_PROPERTIES::TransferDataFromWindow()
                                                  appendUndo );
                 otherUnit->SetValue( m_fields->at( VALUE_FIELD ).GetText() );
                 otherUnit->SetFootprint( m_fields->at( FOOTPRINT_FIELD ).GetText() );
-                otherUnit->GetField( DATASHEET_FIELD )->SetText( m_fields->at( DATASHEET_FIELD ).GetText() );
+
+                for( size_t ii = DATASHEET_FIELD; ii < m_fields->size(); ++ii )
+                {
+                    SCH_FIELD* otherField = otherUnit->FindField( m_fields->at( ii ).GetName() );
+
+                    if( otherField )
+                    {
+                        otherField->SetText( m_fields->at( ii ).GetText() );
+                    }
+                    else
+                    {
+                        SCH_FIELD* newField = otherUnit->AddField( m_fields->at( ii ) );
+                        const_cast<KIID&>( newField->m_Uuid ) = KIID();
+                    }
+                }
+
+                for( size_t ii = otherUnit->GetFields().size() - 1; ii > DATASHEET_FIELD; ii-- )
+                {
+                    SCH_FIELD& otherField = otherUnit->GetFields().at( ii );
+
+                    if( !m_symbol->FindField( otherField.GetName() ) )
+                        otherUnit->GetFields().erase( otherUnit->GetFields().begin() + ii );
+                }
+
                 otherUnit->SetIncludeInBom( !m_cbExcludeFromBom->IsChecked() );
                 otherUnit->SetIncludeOnBoard( !m_cbExcludeFromBoard->IsChecked() );
+
+                if( m_dataModel )
+                {
+                    for( const SCH_PIN& model_pin : *m_dataModel )
+                    {
+                        SCH_PIN* src_pin = otherUnit->GetPin( model_pin.GetNumber() );
+
+                        if( src_pin )
+                            src_pin->SetAlt( model_pin.GetAlt() );
+                    }
+                }
+
                 GetParent()->UpdateItem( otherUnit, false, true );
             }
         }
     }
 
-    // Update any assignments
-    if( m_dataModel )
-    {
-        for( const SCH_PIN& model_pin : *m_dataModel )
-        {
-            // map from the edited copy back to the "real" pin in the symbol.
-            SCH_PIN* src_pin = m_symbol->GetPin( model_pin.GetLibPin() );
-            src_pin->SetAlt( model_pin.GetAlt() );
-        }
-    }
-
     currentScreen->Append( m_symbol );
     GetParent()->TestDanglingEnds();
     GetParent()->UpdateItem( m_symbol, false, true );

eeschema/ee_collectors.cpp

@@ -146,48 +146,8 @@ void EE_COLLECTOR::Collect( SCH_SCREEN* aScreen, const KICAD_T aFilterList[], co
 
     if( aScreen )
     {
-        // Symbols and sheets own their own children so have to be visited even if
-        // they're not in the filter list
-        bool symbolsVisited = false;
-        bool sheetsVisited = false;
-        bool globalLabelsVisited = false;
-
-        EE_RTREE& items = aScreen->Items();
-
-        for( const KICAD_T *filter = aFilterList; *filter != EOT; ++filter )
-        {
-            for( SCH_ITEM *item : items.Overlapping( *filter, aPos, m_Threshold ) )
-            {
-                if( *filter == SCH_SYMBOL_T || *filter == SCH_LOCATE_ANY_T )
-                    symbolsVisited = true;
-
-                if( *filter == SCH_SHEET_T || *filter == SCH_LOCATE_ANY_T )
-                    sheetsVisited = true;
-
-                if( *filter == SCH_GLOBAL_LABEL_T || *filter == SCH_LOCATE_ANY_T )
-                    globalLabelsVisited = true;
-
-                item->Visit( m_inspector, nullptr, m_scanTypes );
-            }
-        }
-
-        if( !symbolsVisited )
-        {
-            for( SCH_ITEM *item : items.Overlapping( SCH_SYMBOL_T, aPos, m_Threshold ) )
-                item->Visit( m_inspector, nullptr, m_scanTypes );
-        }
-
-        if( !sheetsVisited )
-        {
-            for( SCH_ITEM *item : items.Overlapping( SCH_SHEET_T, aPos, m_Threshold ) )
-                item->Visit( m_inspector, nullptr, m_scanTypes );
-        }
-
-        if( !globalLabelsVisited )
-        {
-            for( SCH_ITEM *item : items.Overlapping( SCH_GLOBAL_LABEL_T, aPos, m_Threshold ) )
-                item->Visit( m_inspector, nullptr, m_scanTypes );
-        }
+        for( SCH_ITEM *item : aScreen->Items().Overlapping( SCH_LOCATE_ANY_T, aPos, m_Threshold ) )
+            item->Visit( m_inspector, nullptr, m_scanTypes );
     }
 }
 

eeschema/eeschema_config.cpp

@@ -192,7 +192,7 @@ void SCH_EDIT_FRAME::SaveSettings( APP_SETTINGS_BASE* aCfg )
 
 void SCH_BASE_FRAME::LoadSettings( APP_SETTINGS_BASE* aCfg )
 {
-    wxCHECK_RET( aCfg, wxT( "Call to SCH_BASE_FRAME::SaveSettings with null settings" ) );
+    wxCHECK_RET( aCfg, wxT( "Call to SCH_BASE_FRAME::LoadSettings with null settings" ) );
 
     EDA_DRAW_FRAME::LoadSettings( aCfg );
 

eeschema/erc.cpp

@@ -744,8 +744,9 @@ int ERC_TESTER::TestLibSymbolIssues()
             }
 
             std::unique_ptr<LIB_SYMBOL> flattenedSymbol = libSymbol->Flatten();
+            constexpr int flags = LIB_ITEM::COMPARE_FLAGS::EQUALITY | LIB_ITEM::COMPARE_FLAGS::ERC;
 
-            if( *flattenedSymbol != *libSymbolInSchematic )
+            if( flattenedSymbol->Compare( *libSymbolInSchematic, flags ) != 0 )
             {
                 std::shared_ptr<ERC_ITEM> ercItem = ERC_ITEM::Create( ERCE_LIB_SYMBOL_ISSUES );
                 ercItem->SetItems( symbol );

eeschema/files-io.cpp

@@ -62,6 +62,7 @@
 #include <wx/ffile.h>
 #include <wx/filedlg.h>
 #include <wx/log.h>
+#include <wx/stdpaths.h>
 #include <tools/ee_inspection_tool.h>
 #include <paths.h>
 #include <wx_filename.h>  // For ::ResolvePossibleSymlinks
@@ -693,9 +694,9 @@ bool SCH_EDIT_FRAME::saveSchematicFile( SCH_SHEET* aSheet, const wxString& aSave
     if( !IsWritable( schematicFileName ) )
         return false;
 
-    wxFileName tempFile( schematicFileName );
-    tempFile.SetName( wxT( "." ) + tempFile.GetName() );
-    tempFile.SetExt( tempFile.GetExt() + wxT( "$" ) );
+    wxStandardPaths& paths = wxStandardPaths::Get();
+    wxString tempFile = wxFileName::CreateTempFileName(
+            paths.GetTempDir() + wxFileName::GetPathSeparator() + wxT( "eeschema" ) );
 
     // Save
     wxLogTrace( traceAutoSave, "Saving file " + schematicFileName.GetFullPath() );
@@ -706,7 +707,7 @@ bool SCH_EDIT_FRAME::saveSchematicFile( SCH_SHEET* aSheet, const wxString& aSave
 
     try
     {
-        pi->Save( tempFile.GetFullPath(), aSheet, &Schematic() );
+        pi->Save( tempFile, aSheet, &Schematic() );
         success = true;
     }
     catch( const IO_ERROR& ioe )
@@ -717,11 +718,11 @@ bool SCH_EDIT_FRAME::saveSchematicFile( SCH_SHEET* aSheet, const wxString& aSave
         DisplayError( this, msg );
 
         msg.Printf( _( "Failed to create temporary file '%s'." ),
-                    tempFile.GetFullPath() );
+                    tempFile );
         SetMsgPanel( wxEmptyString, msg );
 
         // In case we started a file but didn't fully write it, clean up
-        wxRemoveFile( tempFile.GetFullPath() );
+        wxRemoveFile( tempFile );
 
         success = false;
     }
@@ -729,18 +730,18 @@ bool SCH_EDIT_FRAME::saveSchematicFile( SCH_SHEET* aSheet, const wxString& aSave
     if( success )
     {
         // Replace the original with the temporary file we just wrote
-        success = wxRenameFile( tempFile.GetFullPath(), schematicFileName.GetFullPath() );
+        success = wxRenameFile( tempFile, schematicFileName.GetFullPath() );
 
         if( !success )
         {
             msg.Printf( _( "Error saving schematic file '%s'.\n"
                            "Failed to rename temporary file '%s'." ),
                         schematicFileName.GetFullPath(),
-                        tempFile.GetFullPath() );
+                        tempFile );
             DisplayError( this, msg );
 
             msg.Printf( _( "Failed to rename temporary file '%s'." ),
-                        tempFile.GetFullPath() );
+                        tempFile );
             SetMsgPanel( wxEmptyString, msg );
         }
     }
@@ -1080,6 +1081,7 @@ bool SCH_EDIT_FRAME::SaveProject( bool aSaveAs )
     }
     else
     {
+        RecordERCExclusions();  // ensure ERC Exclusions list is up to date
         GetSettingsManager()->SaveProject();
     }
 

eeschema/lib_field.cpp

@@ -179,7 +179,7 @@ void LIB_FIELD::Copy( LIB_FIELD* aTarget ) const
 }
 
 
-int LIB_FIELD::compare( const LIB_ITEM& aOther, LIB_ITEM::COMPARE_FLAGS aCompareFlags ) const
+int LIB_FIELD::compare( const LIB_ITEM& aOther, int aCompareFlags ) const
 {
     wxASSERT( aOther.Type() == LIB_FIELD_T );
 

eeschema/lib_field.h

@@ -185,8 +185,7 @@ private:
      *      - Field width.
      *      - Field height.
      */
-    int compare( const LIB_ITEM& aOther,
-            LIB_ITEM::COMPARE_FLAGS aCompareFlags = LIB_ITEM::COMPARE_FLAGS::NORMAL ) const override;
+    int compare( const LIB_ITEM& aOther, int aCompareFlags = 0 ) const override;
 
     /**
      * Print the field.

eeschema/lib_item.cpp

@@ -64,7 +64,7 @@ void LIB_ITEM::GetMsgPanelInfo( EDA_DRAW_FRAME* aFrame, std::vector<MSG_PANEL_IT
 }
 
 
-int LIB_ITEM::compare( const LIB_ITEM& aOther, LIB_ITEM::COMPARE_FLAGS aCompareFlags ) const
+int LIB_ITEM::compare( const LIB_ITEM& aOther, int aCompareFlags ) const
 {
     if( Type() != aOther.Type() )
         return Type() - aOther.Type();

eeschema/lib_item.h

@@ -73,11 +73,19 @@ public:
     /**
      * The list of flags used by the #compare function.
      *
-     * - NORMAL This compares everything between two #LIB_ITEM objects.
-     * - UNIT This compare flag ignores unit and convert and pin number information when
-     *        comparing #LIB_ITEM objects for unit comparison.
+     * - UNIT This flag relaxes unit, conversion and pin number constraints.  It is used for
+     *        #LIB_ITEM object unit comparisons.
+     * - EQUALITY This flag relaxes ordering contstraints so that fields, etc. don't have to
+     *            appear in the same order to be considered equal.
+     * - ERC This flag relaxes constraints on data that is settable in the schematic editor.  It
+     *       compares only symbol-editor-only data.
      */
-    enum COMPARE_FLAGS : int { NORMAL = 0x00, UNIT = 0x01, EQUALITY = 0x02 };
+    enum COMPARE_FLAGS : int
+    {
+        UNIT     = 0x01,
+        EQUALITY = 0x02,
+        ERC      = 0x04
+    };
 
     /**
      * Provide a user-consumable name of the object type.  Perform localization when
@@ -285,8 +293,7 @@ protected:
      *         zero if the object is equal to \a aOther object, or greater than 0 if the
      *         object is greater than \a aOther object.
      */
-    virtual int compare( const LIB_ITEM& aOther,
-            LIB_ITEM::COMPARE_FLAGS aCompareFlags = LIB_ITEM::COMPARE_FLAGS::NORMAL ) const;
+    virtual int compare( const LIB_ITEM& aOther, int aCompareFlags = 0 ) const;
 
     /**
      * Print the item to \a aDC.

eeschema/lib_pin.cpp

@@ -870,7 +870,7 @@ EDA_ITEM* LIB_PIN::Clone() const
 }
 
 
-int LIB_PIN::compare( const LIB_ITEM& aOther, LIB_ITEM::COMPARE_FLAGS aCompareFlags ) const
+int LIB_PIN::compare( const LIB_ITEM& aOther, int aCompareFlags ) const
 {
     wxASSERT( aOther.Type() == LIB_PIN_T );
 
@@ -1061,6 +1061,17 @@ void LIB_PIN::GetMsgPanelInfo( EDA_DRAW_FRAME* aFrame, std::vector<MSG_PANEL_ITE
 }
 
 
+void LIB_PIN::ViewGetLayers( int aLayers[], int& aCount ) const
+{
+    aCount     = 3;
+    aLayers[0] = LAYER_DANGLING;    // We don't really show dangling vs non-dangling (since there
+                                    // are no connections in the symbol editor), but it's still
+                                    // a good visual indication of which end of the pin is which.
+    aLayers[1] = LAYER_DEVICE;
+    aLayers[2] = LAYER_SELECTION_SHADOWS;
+}
+
+
 const EDA_RECT LIB_PIN::GetBoundingBox( bool aIncludeInvisibles, bool aPinOnly ) const
 {
     EDA_RECT       bbox;

eeschema/lib_pin.h

@@ -170,6 +170,8 @@ public:
 
     void GetMsgPanelInfo( EDA_DRAW_FRAME* aFrame, std::vector<MSG_PANEL_ITEM>& aList ) override;
 
+    void ViewGetLayers( int aLayers[], int& aCount ) const override;
+
     /* Cannot use a default parameter here as it will not be compatible with the virtual. */
     const EDA_RECT GetBoundingBox() const override { return GetBoundingBox( false ); }
 
@@ -271,8 +273,7 @@ private:
      *      - Pin horizontal (X) position.
      *      - Pin vertical (Y) position.
      */
-    int compare( const LIB_ITEM& aOther,
-            LIB_ITEM::COMPARE_FLAGS aCompareFlags = LIB_ITEM::COMPARE_FLAGS::NORMAL ) const override;
+    int compare( const LIB_ITEM& aOther, int aCompareFlags = 0 ) const override;
 
 protected:
     wxPoint                 m_position;      // Position of the pin.

eeschema/lib_shape.cpp

@@ -66,7 +66,7 @@ EDA_ITEM* LIB_SHAPE::Clone() const
 }
 
 
-int LIB_SHAPE::compare( const LIB_ITEM& aOther, LIB_ITEM::COMPARE_FLAGS aCompareFlags ) const
+int LIB_SHAPE::compare( const LIB_ITEM& aOther, int aCompareFlags ) const
 {
     int retv = LIB_ITEM::compare( aOther, aCompareFlags );
 
@@ -256,7 +256,12 @@ void LIB_SHAPE::print( const RENDER_SETTINGS* aSettings, const wxPoint& aOffset,
 
         CalcArcAngles( t1, t2 );
 
-        if( aTransform.MapAngles( &t1, &t2 ) == ( NormalizeAngle180( t1 - t2 ) > 0 ) )
+        // N.B. The order of evaluation is critical here as MapAngles will modify t1, t2
+        // and the Normalize routine depends on these modifications for the correct output
+        bool transformed = aTransform.MapAngles( &t1, &t2 );
+        bool transformed2 = ( NormalizeAngle180( t1 - t2 ) > 0 );
+
+        if( transformed  == transformed2 )
             std::swap( pt1, pt2 );
     }
 

eeschema/lib_shape.h

@@ -113,8 +113,7 @@ private:
      *      - Circle vertical (Y) position.
      *      - Circle radius.
      */
-    int compare( const LIB_ITEM& aOther,
-            LIB_ITEM::COMPARE_FLAGS aCompareFlags = LIB_ITEM::COMPARE_FLAGS::NORMAL ) const override;
+    int compare( const LIB_ITEM& aOther, int aCompareFlags = 0 ) const override;
 
     void print( const RENDER_SETTINGS* aSettings, const wxPoint& aOffset, void* aData,
                 const TRANSFORM& aTransform ) override;

eeschema/lib_symbol.cpp

@@ -209,7 +209,7 @@ const LIB_SYMBOL& LIB_SYMBOL::operator=( const LIB_SYMBOL& aSymbol )
 }
 
 
-int LIB_SYMBOL::Compare( const LIB_SYMBOL& aRhs, LIB_ITEM::COMPARE_FLAGS aCompareFlags ) const
+int LIB_SYMBOL::Compare( const LIB_SYMBOL& aRhs, int aCompareFlags ) const
 {
     if( m_me == aRhs.m_me )
         return 0;
@@ -322,17 +322,20 @@ int LIB_SYMBOL::Compare( const LIB_SYMBOL& aRhs, LIB_ITEM::COMPARE_FLAGS aCompar
     if( m_unitsLocked != aRhs.m_unitsLocked )
         return ( m_unitsLocked ) ? 1 : -1;
 
-    if( m_showPinNames != aRhs.m_showPinNames )
-        return ( m_showPinNames ) ? 1 : -1;
+    if( ( aCompareFlags & LIB_ITEM::COMPARE_FLAGS::ERC ) == 0 )
+    {
+        if( m_showPinNames != aRhs.m_showPinNames )
+            return ( m_showPinNames ) ? 1 : -1;
 
-    if( m_showPinNumbers != aRhs.m_showPinNumbers )
-        return ( m_showPinNumbers ) ? 1 : -1;
+        if( m_showPinNumbers != aRhs.m_showPinNumbers )
+            return ( m_showPinNumbers ) ? 1 : -1;
 
-    if( m_includeInBom != aRhs.m_includeInBom )
-        return ( m_includeInBom ) ? 1 : -1;
+        if( m_includeInBom != aRhs.m_includeInBom )
+            return ( m_includeInBom ) ? 1 : -1;
 
-    if( m_includeOnBoard != aRhs.m_includeOnBoard )
-        return ( m_includeOnBoard ) ? 1 : -1;
+        if( m_includeOnBoard != aRhs.m_includeOnBoard )
+            return ( m_includeOnBoard ) ? 1 : -1;
+    }
 
     return 0;
 }
@@ -917,10 +920,10 @@ const EDA_RECT LIB_SYMBOL::GetBodyBoundingBox( int aUnit, int aConvert, bool aIn
         {
             const LIB_PIN& pin = static_cast<const LIB_PIN&>( item );
 
-            // Note: the roots of the pins are always inlcuded for symbols that don't have a
+            // Note: the roots of the pins are always included for symbols that don't have a
             // well-defined body.
 
-            if( aIncludePins )
+            if( aIncludePins && pin.IsVisible() )
                 bbox.Merge( pin.GetBoundingBox( false, true ) );
             else
                 bbox.Merge( pin.GetPinRoot() );

eeschema/lib_symbol.h

@@ -612,8 +612,7 @@ public:
      *         1 if this symbol is greater than \a aRhs
      *         0 if this symbol is the same as \a aRhs
      */
-    int Compare( const LIB_SYMBOL& aRhs,
-                 LIB_ITEM::COMPARE_FLAGS aCompareFlags = LIB_ITEM::COMPARE_FLAGS::NORMAL ) const;
+    int Compare( const LIB_SYMBOL& aRhs, int aCompareFlags = 0 ) const;
 
     bool operator==( const LIB_SYMBOL* aSymbol ) const { return this == aSymbol; }
     bool operator==( const LIB_SYMBOL& aSymbol ) const

eeschema/lib_text.cpp

@@ -84,7 +84,7 @@ EDA_ITEM* LIB_TEXT::Clone() const
 }
 
 
-int LIB_TEXT::compare( const LIB_ITEM& aOther, LIB_ITEM::COMPARE_FLAGS aCompareFlags ) const
+int LIB_TEXT::compare( const LIB_ITEM& aOther, int aCompareFlags ) const
 {
     wxASSERT( aOther.Type() == LIB_TEXT_T );
 

eeschema/lib_text.h

@@ -117,8 +117,7 @@ private:
      *      - Text width.
      *      - Text height.
      */
-    int compare( const LIB_ITEM& aOther,
-            LIB_ITEM::COMPARE_FLAGS aCompareFlags = LIB_ITEM::COMPARE_FLAGS::NORMAL ) const override;
+    int compare( const LIB_ITEM& aOther, int aCompareFlags = 0 ) const override;
 
     void print( const RENDER_SETTINGS* aSettings, const wxPoint& aOffset, void* aData,
                 const TRANSFORM& aTransform ) override;

eeschema/picksymbol.cpp

@@ -105,7 +105,10 @@ PICKED_SYMBOL SCH_BASE_FRAME::PickSymbolFromLibTree( const SCHLIB_FILTER* aFilte
     Pgm().GetSettingsManager().GetAppSettings<EESCHEMA_SETTINGS>();
     Pgm().GetSettingsManager().GetAppSettings<SYMBOL_EDITOR_SETTINGS>();
 
-    wxObjectDataPtr<LIB_TREE_MODEL_ADAPTER> adapter = SYMBOL_TREE_MODEL_ADAPTER::Create( this, libs );
+    wxObjectDataPtr<LIB_TREE_MODEL_ADAPTER> dataPtr
+                                    = SYMBOL_TREE_MODEL_ADAPTER::Create( this, libs );
+    SYMBOL_TREE_MODEL_ADAPTER* modelAdapter
+                                    = static_cast<SYMBOL_TREE_MODEL_ADAPTER*>( dataPtr.get() );
     bool loaded = false;
 
     if( aFilter )
@@ -117,14 +120,14 @@ PICKED_SYMBOL SCH_BASE_FRAME::PickSymbolFromLibTree( const SCHLIB_FILTER* aFilte
             if( libs->HasLibrary( liblist[ii], true ) )
             {
                 loaded = true;
-                static_cast<SYMBOL_TREE_MODEL_ADAPTER*>( adapter.get() )->AddLibrary( liblist[ii] );
+                modelAdapter->AddLibrary( liblist[ii] );
             }
         }
 
-        adapter->AssignIntrinsicRanks();
+        modelAdapter->AssignIntrinsicRanks();
 
         if( aFilter->GetFilterPowerSymbols() )
-            adapter->SetFilter( SYMBOL_TREE_MODEL_ADAPTER::SYM_FILTER_POWER );
+            modelAdapter->SetFilter( SYMBOL_TREE_MODEL_ADAPTER::SYM_FILTER_POWER );
     }
 
     std::vector< LIB_TREE_ITEM* > history_list;
@@ -138,29 +141,34 @@ PICKED_SYMBOL SCH_BASE_FRAME::PickSymbolFromLibTree( const SCHLIB_FILTER* aFilte
             history_list.push_back( symbol );
     }
 
-    adapter->DoAddLibrary( wxT( "-- " ) + _( "Recently Used" ) + " --", wxEmptyString, history_list,
-                           true );
+    modelAdapter->DoAddLibrary( wxT( "-- " ) + _( "Recently Used" ) + wxT( " --" ), wxEmptyString,
+                                history_list, true );
 
     if( !aHistoryList.empty() )
-        adapter->SetPreselectNode( aHistoryList[0].LibId, aHistoryList[0].Unit );
+        modelAdapter->SetPreselectNode( aHistoryList[0].LibId, aHistoryList[0].Unit );
 
     const std::vector< wxString > libNicknames = libs->GetLogicalLibs();
 
     if( !loaded )
-         static_cast<SYMBOL_TREE_MODEL_ADAPTER*>( adapter.get() )->AddLibraries( libNicknames,
-                                                  this );
+    {
+        if( !modelAdapter->AddLibraries( libNicknames, this ) )
+        {
+            // loading cancelled by user
+            return PICKED_SYMBOL();
+        }
+    }
 
     if( aHighlight && aHighlight->IsValid() )
-        adapter->SetPreselectNode( *aHighlight, /* aUnit */ 0 );
+        modelAdapter->SetPreselectNode( *aHighlight, /* aUnit */ 0 );
 
     wxString dialogTitle;
 
-    if( adapter->GetFilter() == SYMBOL_TREE_MODEL_ADAPTER::SYM_FILTER_POWER )
-        dialogTitle.Printf( _( "Choose Power Symbol (%d items loaded)" ), adapter->GetItemCount() );
+    if( modelAdapter->GetFilter() == SYMBOL_TREE_MODEL_ADAPTER::SYM_FILTER_POWER )
+        dialogTitle.Printf( _( "Choose Power Symbol (%d items loaded)" ), dataPtr->GetItemCount() );
     else
-        dialogTitle.Printf( _( "Choose Symbol (%d items loaded)" ), adapter->GetItemCount() );
+        dialogTitle.Printf( _( "Choose Symbol (%d items loaded)" ), dataPtr->GetItemCount() );
 
-    DIALOG_CHOOSE_SYMBOL dlg( this, dialogTitle, adapter, aConvert, aAllowFields, aShowFootprints,
+    DIALOG_CHOOSE_SYMBOL dlg( this, dialogTitle, dataPtr, aConvert, aAllowFields, aShowFootprints,
                               aUseLibBrowser );
 
     if( dlg.ShowModal() == wxID_CANCEL )

eeschema/project_rescue.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2015 Chris Pavlina <pavlina.chris@gmail.com>
- * Copyright (C) 2015-2021 KiCad Developers, see change_log.txt for contributors.
+ * Copyright (C) 2015-2022 KiCad Developers, see change_log.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -89,7 +89,6 @@ static void getSymbols( SCHEMATIC* aSchematic, std::vector<SCH_SYMBOL*>& aSymbol
 static LIB_SYMBOL* findSymbol( const wxString& aName, SYMBOL_LIBS* aLibs, bool aCached )
 {
     LIB_SYMBOL *symbol = nullptr;
-    // wxString new_name = LIB_ID::FixIllegalChars( aName, false );
 
     for( SYMBOL_LIB& each_lib : *aLibs )
     {
@@ -101,6 +100,17 @@ static LIB_SYMBOL* findSymbol( const wxString& aName, SYMBOL_LIBS* aLibs, bool a
 
         symbol = each_lib.FindSymbol( aName );
 
+        // At some point during V5 development, the LIB_ID delimiter character ':' was
+        // replaced by '_' when writing the symbol cache library so we have to test for
+        // the LIB_NICKNAME_LIB_SYMBOL_NAME case.
+        if( symbol == nullptr && each_lib.IsCache() )
+        {
+            wxString name = aName;
+
+            if( name.Replace( wxT( ":" ), wxT( "_" ) ) )
+                symbol = each_lib.FindSymbol( name );
+        }
+
         if( symbol )
             break;
     }

eeschema/sch_connection.cpp

@@ -412,7 +412,7 @@ void SCH_CONNECTION::AppendInfoToMsgPanel( std::vector<MSG_PANEL_ITEM>& aList )
     // CONNECTION_GRAPH entirely in the future, as they are mostly only useful for netlist exports.
 #if 0
     if( !IsBus() )
-        aList.emplace_back( _( "Net CodewxT( " ), wxString::Format( " )%d", m_net_code ) );
+        aList.emplace_back( _( "Net Code" ), wxString::Format( "%d", m_net_code ) );
 #endif
 
     if( auto alias = m_graph->GetBusAlias( m_name ) )
@@ -474,7 +474,7 @@ bool SCH_CONNECTION::MightBeBusLabel( const wxString& aLabel )
     // Weak heuristic for performance reasons.  Stronger test will be used for connectivity
     wxString label = UnescapeString( aLabel );
 
-    return label.Contains( wxT( "[wxT( " ) ) || label.Contains( wxT( " ){" ) );
+    return label.Contains( wxT( "[" ) ) || label.Contains( wxT( "{" ) );
 }
 
 

eeschema/sch_item.cpp

@@ -140,7 +140,7 @@ SCH_CONNECTION* SCH_ITEM::Connection( const SCH_SHEET_PATH* aSheet ) const
     if( !IsConnectable() )
         return nullptr;
 
-    wxASSERT_MSG( !IsConnectivityDirty(),
+    wxCHECK_MSG( !IsConnectivityDirty(), nullptr,
                   wxT( "Shouldn't be asking for connection if connectivity is dirty!" ) );
 
     if( !aSheet )
@@ -182,7 +182,13 @@ SCH_ITEM_SET& SCH_ITEM::ConnectedItems( const SCH_SHEET_PATH& aSheet )
 
 void SCH_ITEM::AddConnectionTo( const SCH_SHEET_PATH& aSheet, SCH_ITEM* aItem )
 {
-    m_connected_items[ aSheet ].insert( aItem );
+    SCH_ITEM_SET& set = m_connected_items[ aSheet ];
+
+    // The vector elements are small, so reserve 1k at a time to prevent re-allocations
+    if( set.size() == set.capacity() )
+        set.reserve( set.size() + 4096 );
+
+    set.emplace_back( aItem );
 }
 
 
@@ -212,6 +218,9 @@ SCH_CONNECTION* SCH_ITEM::InitializeConnection( const SCH_SHEET_PATH& aSheet,
 SCH_CONNECTION* SCH_ITEM::GetOrInitConnection( const SCH_SHEET_PATH& aSheet,
                                                CONNECTION_GRAPH* aGraph )
 {
+    if( !IsConnectable() )
+        return nullptr;
+
     SetConnectivityDirty( false );
 
     SCH_CONNECTION* connection = Connection( &aSheet );

eeschema/sch_item.h

@@ -26,7 +26,7 @@
 #define SCH_ITEM_H
 
 #include <unordered_map>
-#include <unordered_set>
+#include <set>
 
 #include <eda_item.h>
 #include <plotters/plotter.h>      // for PLOT_DASH_TYPE definition
@@ -131,7 +131,7 @@ private:
 };
 
 
-typedef std::unordered_set<SCH_ITEM*> SCH_ITEM_SET;
+typedef std::vector<SCH_ITEM*> SCH_ITEM_SET;
 
 
 /**

eeschema/sch_line.cpp

@@ -447,10 +447,12 @@ void SCH_LINE::MirrorHorizontally( int aCenter )
 
 void SCH_LINE::Rotate( const wxPoint& aCenter )
 {
+    // When we allow off grid items, the
+    // else if should become a plain if to allow
+    // rotation around the center of the line
     if( m_flags & STARTPOINT )
         RotatePoint( &m_start, aCenter, 900 );
-
-    if( m_flags & ENDPOINT )
+    else if( m_flags & ENDPOINT )
         RotatePoint( &m_end, aCenter, 900 );
 }
 

eeschema/sch_plugins/eagle/sch_eagle_plugin.cpp

@@ -1352,11 +1352,20 @@ void SCH_EAGLE_PLUGIN::loadInstance( wxXmlNode* aInstanceNode )
     // with a hash character to mute netlist updater complaints
     wxString reference = package.IsEmpty() ? '#' + einstance.part : einstance.part;
 
+    // reference must end with a number but EAGLE does not enforce this
+    if( reference.find_last_not_of( "0123456789" ) == (reference.Length()-1) )
+        reference.Append( "0" );
+
     // EAGLE allows references to be single digits.  This breaks KiCad netlisting, which requires
     // parts to have non-digit + digit annotation.  If the reference begins with a number,
     // we prepend 'UNK' (unknown) for the symbol designator
-    if( reference.find_first_not_of( wxT( "0123456789" ) ) == wxString::npos )
-        reference.Prepend( wxT( "UNK" ) );
+    if( reference.find_first_not_of( "0123456789" ) != 0 )
+        reference.Prepend( "UNK" );
+
+    // EAGLE allows designator to start with # but that is used in KiCad
+    // for symbols which do not have a footprint
+    if( einstance.part.find_first_not_of( "#" ) != 0 )
+        reference.Prepend( "UNK" );
 
     SCH_SHEET_PATH sheetpath;
     m_rootSheet->LocatePathOfScreen( screen, &sheetpath );

eeschema/sch_plugins/kicad/sch_sexpr_parser.cpp

@@ -1013,15 +1013,15 @@ LIB_SHAPE* SCH_SEXPR_PARSER::parseArc()
         }
     }
 
-    arc->SetStart( startPoint );
-    arc->SetEnd( endPoint );
-
     if( hasMidPoint )
     {
-        arc->SetCenter( (wxPoint) CalcArcCenter( arc->GetStart(), midPoint, arc->GetEnd() ) );
+        arc->SetArcGeometry( startPoint, midPoint, endPoint);
     }
     else if( hasAngles )
     {
+        arc->SetStart( startPoint );
+        arc->SetEnd( endPoint );
+
         /**
          * This accounts for an oddity in the old library format, where the symbol is overdefined.
          * The previous draw (based on wxwidgets) used start point and end point and always drew
@@ -1035,6 +1035,7 @@ LIB_SHAPE* SCH_SEXPR_PARSER::parseArc()
             arc->SetStart( arc->GetEnd() );
             arc->SetEnd( temp );
         }
+
         arc->SetCenter( center );
     }
     else

eeschema/sch_plugins/kicad/sch_sexpr_plugin.cpp

@@ -1090,14 +1090,11 @@ void SCH_SEXPR_PLUGIN::saveSymbol( SCH_SYMBOL* aSymbol, SCH_SHEET_PATH* aSheetPa
         m_out->Print( 0, ")" );
     }
 
-    int unit = -1;
+    int unit = ( aSymbol->GetInstanceReferences().size() == 0 ) ?
+               aSymbol->GetUnit() :
+               aSymbol->GetInstanceReferences()[0].m_Unit;
 
-    if( !( aSymbol->GetInstanceReferences().size() > 1 ) )
-        unit = aSymbol->GetUnit();
-    else if( aSheetPath != nullptr )
-        unit = aSymbol->GetUnitSelection( aSheetPath );
-    if ( unit >= 0 )
-        m_out->Print( 0, " (unit %d)", unit );
+    m_out->Print( 0, " (unit %d)", unit );
 
     if( aSymbol->GetConvert() == LIB_ITEM::LIB_CONVERT::DEMORGAN )
         m_out->Print( 0, " (convert %d)", aSymbol->GetConvert() );
@@ -1118,10 +1115,49 @@ void SCH_SEXPR_PLUGIN::saveSymbol( SCH_SYMBOL* aSymbol, SCH_SHEET_PATH* aSheetPa
 
     for( SCH_FIELD& field : aSymbol->GetFields() )
     {
-        saveField( &field, aNestLevel + 1 );
+        int id = field.GetId();
+        wxString value = field.GetText();
+
+        // The instance fields are always set to the first sheet instance of the project to
+        // schematic file changes when switching sheet instances with the current project
+        // schematic.  It does not solve the problem for schematics shared between projects.
+        if( id == REFERENCE_FIELD )
+        {
+            field.SetText( ( aSymbol->GetInstanceReferences().size() == 0 ) ?
+                           value :
+                           aSymbol->GetInstanceReferences()[0].m_Reference );
+        }
+        else if( id == VALUE_FIELD )
+        {
+            field.SetText( ( aSymbol->GetInstanceReferences().size() == 0 ) ?
+                           value :
+                           aSymbol->GetInstanceReferences()[0].m_Value );
+        }
+        else if( id == FOOTPRINT_FIELD )
+        {
+            field.SetText( ( aSymbol->GetInstanceReferences().size() == 0 ) ?
+                           value :
+                           aSymbol->GetInstanceReferences()[0].m_Footprint );
+        }
+
+        try
+        {
+            saveField( &field, aNestLevel + 1 );
+        }
+        catch( ... )
+        {
+            // Restore the changed field text on write error.
+            if( id == REFERENCE_FIELD || id == VALUE_FIELD || id == FOOTPRINT_FIELD )
+                field.SetText( value );
+
+            throw;
+        }
+
+        if( id == REFERENCE_FIELD || id == VALUE_FIELD || id == FOOTPRINT_FIELD )
+            field.SetText( value );
     }
 
-    for( const SCH_PIN* pin : aSymbol->GetPins() )
+    for( const std::unique_ptr<SCH_PIN>& pin : aSymbol->GetRawPins() )
     {
         if( pin->GetAlt().IsEmpty() )
         {

eeschema/sch_sheet.cpp

@@ -248,7 +248,9 @@ bool SCH_SHEET::ResolveTextVar( wxString* token, int aDepth ) const
 
     PROJECT *project = &Schematic()->Prj();
 
-    if( m_screen->GetTitleBlock().TextVarResolver( token, project ) )
+    // We cannot resolve text variables initially on load as we need to first load the screen and
+    // then parse the hierarchy.  So skip the resolution if the screen isn't set yet
+    if( m_screen && m_screen->GetTitleBlock().TextVarResolver( token, project ) )
     {
         return true;
     }
@@ -315,6 +317,28 @@ void SCH_SHEET::SwapData( SCH_ITEM* aItem )
 }
 
 
+void SCH_SHEET::SetFields( const std::vector<SCH_FIELD>& aFields )
+{
+    m_fields = aFields;
+    int next_id = SHEET_MANDATORY_FIELDS;
+
+    for( int ii = 0; ii < int( m_fields.size() ); )
+    {
+        if( m_fields[ii].GetId() < 0 || m_fields[ii].GetId() >= ssize_t( m_fields.size() ) )
+            m_fields[ii].SetId( next_id++ );
+
+        if( m_fields[ii].GetId() != ii )
+            std::swap( m_fields[ii], m_fields[m_fields[ii].GetId()]);
+
+        if( m_fields[ii].GetId() == ii )
+            ++ii;
+    }
+
+    // Make sure that we get the UNIX variant of the file path
+    SetFileName( m_fields[SHEETFILENAME].GetText() );
+}
+
+
 void SCH_SHEET::AddPin( SCH_SHEET_PIN* aSheetPin )
 {
     wxASSERT( aSheetPin != nullptr );

eeschema/sch_sheet.h

@@ -95,10 +95,7 @@ public:
      *
      * @param aFields are the fields to set in this symbol.
      */
-    void SetFields( const std::vector<SCH_FIELD>& aFields )
-    {
-        m_fields = aFields;     // vector copying, length is changed possibly
-    }
+    void SetFields( const std::vector<SCH_FIELD>& aFields );
 
     wxString GetName() const { return m_fields[ SHEETNAME ].GetText(); }
 

eeschema/sch_symbol.cpp

@@ -580,8 +580,15 @@ const wxString SCH_SYMBOL::GetValue( const SCH_SHEET_PATH* sheet, bool aResolve
     {
         if( instance.m_Path == path && !instance.m_Value.IsEmpty() )
         {
-            // This can only be an override from an Update Schematic from PCB, and therefore
-            // will always be fully resolved.
+            // This can only be overridden by a new value but if we are resolving,
+            // make sure that the symbol returns the fully resolved text
+            if( aResolve )
+            {
+                SCH_SYMBOL new_sym( *this );
+                new_sym.GetField( VALUE_FIELD )->SetText( instance.m_Value );
+                return new_sym.GetField( VALUE_FIELD )->GetShownText();
+            }
+
             return instance.m_Value;
         }
     }

eeschema/sch_symbol.h

@@ -92,7 +92,7 @@ public:
      * @param setNewItemFlag is used to set the symbol #IS_NEW and #IS_MOVING flags.
      */
     SCH_SYMBOL( const LIB_SYMBOL& aSymbol, const LIB_ID& aLibId, const SCH_SHEET_PATH* aSheet,
-                int unit = 0, int convert = 0, const wxPoint& pos = wxPoint( 0, 0 ) );
+                int unit, int convert = 0, const wxPoint& pos = wxPoint( 0, 0 ) );
 
     SCH_SYMBOL( const LIB_SYMBOL& aSymbol, const SCH_SHEET_PATH* aSheet, const PICKED_SYMBOL& aSel,
                 const wxPoint& pos = wxPoint( 0, 0 ) );
@@ -694,13 +694,13 @@ private:
      */
     wxString    m_schLibSymbolName;
 
-    TRANSFORM   m_transform;    ///< The rotation/mirror transformation matrix.
-    SCH_FIELDS  m_fields;       ///< Variable length list of fields.
+    TRANSFORM                              m_transform; ///< The rotation/mirror transformation.
+    std::vector<SCH_FIELD>                 m_fields;    ///< Variable length list of fields.
 
-    std::unique_ptr< LIB_SYMBOL >          m_part;    // a flattened copy of the LIB_SYMBOL from
-                                                      // the PROJECT's libraries.
-    std::vector<std::unique_ptr<SCH_PIN>>  m_pins;    // a SCH_PIN for every LIB_PIN (all units)
-    std::unordered_map<LIB_PIN*, unsigned> m_pinMap;  // library pin pointer to SCH_PIN's index
+    std::unique_ptr< LIB_SYMBOL >          m_part;      ///< a flattened copy of the LIB_SYMBOL
+                                                        ///<   from the PROJECT's libraries.
+    std::vector<std::unique_ptr<SCH_PIN>>  m_pins;      ///< a SCH_PIN for every LIB_PIN (all units)
+    std::unordered_map<LIB_PIN*, unsigned> m_pinMap;    ///< library pin pointer : SCH_PIN's index
 
     bool        m_isInNetlist;  ///< True if the symbol should appear in the netlist
     bool        m_inBom;        ///< True to include in bill of materials export.

eeschema/sch_text.cpp

@@ -492,7 +492,7 @@ bool SCH_TEXT::UpdateDanglingState( std::vector<DANGLING_END_ITEM>& aItemList,
                 m_isDangling = false;
 
                 if( aPath && item.GetType() != PIN_END )
-                    m_connected_items[ *aPath ].insert( static_cast<SCH_ITEM*>( item.GetItem() ) );
+                    AddConnectionTo( *aPath, static_cast<SCH_ITEM*>( item.GetItem() ) );
             }
 
             break;
@@ -861,15 +861,18 @@ bool SCH_LABEL::IsType( const KICAD_T aScanTypes[] ) const
 
     wxCHECK_MSG( Schematic(), false, wxT( "No parent SCHEMATIC set for SCH_LABEL!" ) );
 
-    SCH_SHEET_PATH current = Schematic()->CurrentSheet();
+    // Ensure m_connected_items for Schematic()->CurrentSheet() exists.
+    // Can be not the case when "this" is living in clipboard
+    if( m_connected_items.find( Schematic()->CurrentSheet() ) == m_connected_items.end() )
+        return false;
+
+    const SCH_ITEM_SET& item_set = m_connected_items.at( Schematic()->CurrentSheet() );
 
     for( const KICAD_T* p = aScanTypes; *p != EOT; ++p )
     {
         if( *p == SCH_LABEL_LOCATE_WIRE_T )
         {
-            wxASSERT( m_connected_items.count( current ) );
-
-            for( SCH_ITEM* connection : m_connected_items.at( current ) )
+            for( SCH_ITEM* connection : item_set )
             {
                 if( connection->IsType( wireTypes ) )
                     return true;
@@ -877,9 +880,7 @@ bool SCH_LABEL::IsType( const KICAD_T aScanTypes[] ) const
         }
         else if ( *p == SCH_LABEL_LOCATE_BUS_T )
         {
-            wxASSERT( m_connected_items.count( current ) );
-
-            for( SCH_ITEM* connection : m_connected_items.at( current ) )
+            for( SCH_ITEM* connection : item_set )
             {
                 if( connection->IsType( busTypes ) )
                     return true;

eeschema/schematic_undo_redo.cpp

@@ -350,9 +350,6 @@ void SCH_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList )
         }
     }
 
-    // Bitmaps are cached in Opengl: clear the cache, because
-    // the cache data can be invalid
-    GetCanvas()->GetView()->RecacheAllItems();
     GetCanvas()->GetView()->ClearHiddenFlags();
 }
 
@@ -383,7 +380,6 @@ void SCH_EDIT_FRAME::RollbackSchematicFromUndo()
         m_toolManager->GetTool<EE_SELECTION_TOOL>()->RebuildSelection();
     }
 
-    SyncView();
     GetCanvas()->Refresh();
 }
 

eeschema/sheet.cpp

@@ -264,7 +264,7 @@ bool SCH_EDIT_FRAME::LoadSheetFromFile( SCH_SHEET* aSheet, SCH_SHEET_PATH* aHier
                 msg.Printf( _( "The project library table '%s' does not exist or cannot "
                                "be read.  This may result in broken symbol links for the "
                                "schematic.  Do you wish to continue?" ),
-                            fileName.GetFullPath() );
+                            symLibTableFn.GetFullPath() );
                 wxMessageDialog msgDlg4( this, msg, _( "Continue Load Schematic" ),
                                          wxOK | wxCANCEL | wxCANCEL_DEFAULT |
                                          wxCENTER | wxICON_QUESTION );

eeschema/symbol_async_loader.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2021 Jon Evans <jon@craftyjon.com>
- * Copyright (C) 2021 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 2021-2022 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software: you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -35,8 +35,7 @@ SYMBOL_ASYNC_LOADER::SYMBOL_ASYNC_LOADER( const std::vector<wxString>& aNickname
         m_onlyPowerSymbols( aOnlyPowerSymbols ),
         m_output( aOutput ),
         m_reporter( aReporter ),
-        m_nextLibrary( 0 ),
-        m_canceled( false )
+        m_nextLibrary( 0 )
 {
     wxASSERT( m_table );
     m_threadCount = std::max<size_t>( 1, std::thread::hardware_concurrency() );
@@ -48,7 +47,7 @@ SYMBOL_ASYNC_LOADER::SYMBOL_ASYNC_LOADER( const std::vector<wxString>& aNickname
 
 SYMBOL_ASYNC_LOADER::~SYMBOL_ASYNC_LOADER()
 {
-    Abort();
+    Join();
 }
 
 
@@ -88,13 +87,6 @@ bool SYMBOL_ASYNC_LOADER::Join()
 }
 
 
-void SYMBOL_ASYNC_LOADER::Abort()
-{
-    m_canceled.store( true );
-    Join();
-}
-
-
 bool SYMBOL_ASYNC_LOADER::Done()
 {
     return m_nextLibrary.load() >= m_nicknames.size();
@@ -110,11 +102,15 @@ std::vector<SYMBOL_ASYNC_LOADER::LOADED_PAIR> SYMBOL_ASYNC_LOADER::worker()
     for( size_t libraryIndex = m_nextLibrary++; libraryIndex < m_nicknames.size();
          libraryIndex = m_nextLibrary++ )
     {
-        if( m_canceled.load() )
+        const wxString& nickname = m_nicknames[libraryIndex];
+
+        if( m_reporter )
+            m_reporter->AdvancePhase( wxString::Format( _( "Loading library %s..." ), nickname ) );
+
+        if( m_reporter && m_reporter->IsCancelled() )
             break;
 
-        const wxString& nickname = m_nicknames[libraryIndex];
-        LOADED_PAIR     pair( nickname, {} );
+        LOADED_PAIR pair( nickname, {} );
 
         try
         {
@@ -129,9 +125,6 @@ std::vector<SYMBOL_ASYNC_LOADER::LOADED_PAIR> SYMBOL_ASYNC_LOADER::worker()
             std::lock_guard<std::mutex> lock( m_errorMutex );
             m_errors += msg;
         }
-
-        if( m_reporter )
-            m_reporter->AdvancePhase( wxString::Format( _( "Loading library %s..." ), nickname ) );
     }
 
     return ret;

eeschema/symbol_async_loader.h

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2021 Jon Evans <jon@craftyjon.com>
- * Copyright (C) 2021 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 2021-2022 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software: you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -62,11 +62,6 @@ public:
      */
     bool Join();
 
-    /**
-     * Cancels a load in-progress
-     */
-    void Abort();
-
     ///< Return true if loading is done
     bool Done();
 
@@ -97,7 +92,6 @@ private:
 
     size_t              m_threadCount;
     std::atomic<size_t> m_nextLibrary;
-    std::atomic_bool    m_canceled;
     wxString            m_errors;
     std::mutex          m_errorMutex;
 

eeschema/symbol_editor/symbol_edit_frame.cpp

@@ -127,13 +127,20 @@ SYMBOL_EDIT_FRAME::SYMBOL_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
     LoadSettings( m_settings );
 
     m_libMgr = new SYMBOL_LIBRARY_MANAGER( *this );
+    bool loadingCancelled = false;
 
-    // Preload libraries before using SyncLibraries the first time, as the preload is threaded
-    WX_PROGRESS_REPORTER reporter( this, _( "Loading Symbol Libraries" ),
-                                   m_libMgr->GetLibraryCount(), true );
-    m_libMgr->Preload( reporter );
+    {
+        // Preload libraries before using SyncLibraries the first time, as the preload is
+        // multi-threaded
+        WX_PROGRESS_REPORTER reporter( this, _( "Loading Symbol Libraries" ),
+                                       m_libMgr->GetLibraryCount(), true );
+        m_libMgr->Preload( reporter );
 
-    SyncLibraries( false );
+        loadingCancelled = reporter.IsCancelled();
+        wxSafeYield();
+    }
+
+    SyncLibraries( false, loadingCancelled );
     m_treePane = new SYMBOL_TREE_PANE( this, m_libMgr );
 
     resolveCanvasType();
@@ -235,6 +242,9 @@ SYMBOL_EDIT_FRAME::SYMBOL_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
 
     // Ensure the window is on top
     Raise();
+
+    if( loadingCancelled )
+        ShowInfoBarWarning( _( "Symbol library loading was cancelled by user." ) );
 }
 
 
@@ -922,7 +932,8 @@ wxString SYMBOL_EDIT_FRAME::getTargetLib() const
 }
 
 
-void SYMBOL_EDIT_FRAME::SyncLibraries( bool aShowProgress, const wxString& aForceRefresh )
+void SYMBOL_EDIT_FRAME::SyncLibraries( bool aShowProgress, bool aPreloadCancelled,
+                                       const wxString& aForceRefresh )
 {
     LIB_ID selected;
 
@@ -941,7 +952,7 @@ void SYMBOL_EDIT_FRAME::SyncLibraries( bool aShowProgress, const wxString& aForc
                                                                     libName ) );
                 } );
     }
-    else
+    else if( !aPreloadCancelled )
     {
         m_libMgr->Sync( aForceRefresh,
                 [&]( int progress, int max, const wxString& libName )

eeschema/symbol_editor/symbol_edit_frame.h

@@ -296,7 +296,8 @@ public:
      * Synchronize the library manager to the symbol library table, and then the symbol tree
      * to the library manager.  Optionally displays a progress dialog.
      */
-    void SyncLibraries( bool aShowProgress, const wxString& aForceRefresh = wxEmptyString );
+    void SyncLibraries( bool aShowProgress, bool aPreloadCancelled = false,
+                        const wxString& aForceRefresh = wxEmptyString );
 
     /**
      * Filter, sort, and redisplay the library tree.

eeschema/symbol_editor/symbol_editor.cpp

@@ -828,8 +828,7 @@ void SYMBOL_EDIT_FRAME::CopySymbolToClipboard()
 
 void SYMBOL_EDIT_FRAME::DuplicateSymbol( bool aFromClipboard )
 {
-    int dummyUnit;
-    LIB_ID libId = m_treePane->GetLibTree()->GetSelectedLibId( &dummyUnit );
+    LIB_ID libId = GetTargetLibId();
     wxString lib = libId.GetLibNickname();
 
     if( !m_libMgr->LibraryExists( lib ) )
@@ -1119,7 +1118,7 @@ bool SYMBOL_EDIT_FRAME::saveLibrary( const wxString& aLibrary, bool aNewFile )
         if( resyncLibTree )
         {
             FreezeLibraryTree();
-            SyncLibraries( true, forceRefresh );
+            SyncLibraries( true, false, forceRefresh );
             ThawLibraryTree();
         }
     }

eeschema/symbol_editor/symbol_library_manager.cpp

@@ -74,8 +74,6 @@ void SYMBOL_LIBRARY_MANAGER::Sync( const wxString& aForceRefresh,
 
 void SYMBOL_LIBRARY_MANAGER::Preload( PROGRESS_REPORTER& aReporter )
 {
-    const int progressIntervalMillis = 60;
-
     SYMBOL_ASYNC_LOADER loader( symTable()->GetLogicalLibs(), symTable(), false, nullptr,
                                 &aReporter );
 
@@ -85,19 +83,13 @@ void SYMBOL_LIBRARY_MANAGER::Preload( PROGRESS_REPORTER& aReporter )
 
     while( !loader.Done() )
     {
-        aReporter.KeepRefreshing();
+        if( !aReporter.KeepRefreshing() )
+            break;
 
-        wxMilliSleep( progressIntervalMillis );
+        wxMilliSleep( 33 /* 30 FPS refresh rate */ );
     }
 
-    if( aReporter.IsCancelled() )
-    {
-        loader.Abort();
-    }
-    else
-    {
-        loader.Join();
-    }
+    loader.Join();
 
     if( !loader.GetErrors().IsEmpty() )
     {
@@ -116,7 +108,7 @@ void SYMBOL_LIBRARY_MANAGER::Preload( PROGRESS_REPORTER& aReporter )
 
 bool SYMBOL_LIBRARY_MANAGER::HasModifications() const
 {
-    for( const auto& lib : m_libs )
+    for( const std::pair<const wxString, LIB_BUFFER>& lib : m_libs )
     {
         if( lib.second.IsModified() )
             return true;
@@ -130,7 +122,7 @@ int SYMBOL_LIBRARY_MANAGER::GetHash() const
 {
     int hash = symTable()->GetModifyHash();
 
-    for( const auto& lib : m_libs )
+    for( const std::pair<const wxString, LIB_BUFFER>& lib : m_libs )
         hash += lib.second.GetHash();
 
     return hash;
@@ -144,7 +136,7 @@ int SYMBOL_LIBRARY_MANAGER::GetLibraryHash( const wxString& aLibrary ) const
     if( libBufIt != m_libs.end() )
         return libBufIt->second.GetHash();
 
-    auto row = GetLibrary( aLibrary );
+    SYMBOL_LIB_TABLE_ROW* row = GetLibrary( aLibrary );
 
     // return -1 if library does not exist or 0 if not modified
     return row ? std::hash<std::string>{}( aLibrary.ToStdString() +
@@ -156,7 +148,7 @@ wxArrayString SYMBOL_LIBRARY_MANAGER::GetLibraryNames() const
 {
     wxArrayString res;
 
-    for( const auto& libName : symTable()->GetLogicalLibs() )
+    for( const wxString& libName : symTable()->GetLogicalLibs() )
         res.Add( libName );
 
     return res;

eeschema/symbol_tree_model_adapter.cpp

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2017 Chris Pavlina <pavlina.chris@gmail.com>
  * Copyright (C) 2014 Henner Zeller <h.zeller@acm.org>
- * Copyright (C) 2014-2021 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 2014-2022 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software: you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -35,7 +35,7 @@
 
 bool SYMBOL_TREE_MODEL_ADAPTER::m_show_progress = true;
 
-#define PROGRESS_INTERVAL_MILLIS 66
+#define PROGRESS_INTERVAL_MILLIS 33      // 30 FPS refresh rate
 
 
 wxObjectDataPtr<LIB_TREE_MODEL_ADAPTER>
@@ -56,7 +56,7 @@ SYMBOL_TREE_MODEL_ADAPTER::~SYMBOL_TREE_MODEL_ADAPTER()
 {}
 
 
-void SYMBOL_TREE_MODEL_ADAPTER::AddLibraries( const std::vector<wxString>& aNicknames,
+bool SYMBOL_TREE_MODEL_ADAPTER::AddLibraries( const std::vector<wxString>& aNicknames,
                                               wxWindow* aParent )
 {
     std::unique_ptr<WX_PROGRESS_REPORTER> prg = nullptr;
@@ -82,20 +82,18 @@ void SYMBOL_TREE_MODEL_ADAPTER::AddLibraries( const std::vector<wxString>& aNick
 
     while( !loader.Done() )
     {
-        if( prg )
-            prg->KeepRefreshing();
+        if( prg && !prg->KeepRefreshing() )
+            break;
 
         wxMilliSleep( PROGRESS_INTERVAL_MILLIS );
     }
 
-    if( prg && prg->IsCancelled() )
-    {
-        loader.Abort();
-    }
-    else
-    {
-        loader.Join();
-    }
+    loader.Join();
+
+    bool cancelled = false;
+
+    if( prg )
+        cancelled = prg->IsCancelled();
 
     if( !loader.GetErrors().IsEmpty() )
     {
@@ -134,6 +132,8 @@ void SYMBOL_TREE_MODEL_ADAPTER::AddLibraries( const std::vector<wxString>& aNick
         prg.reset();
         m_show_progress = false;
     }
+
+    return !cancelled;
 }
 
 

eeschema/symbol_tree_model_adapter.h

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2017 Chris Pavlina <pavlina.chris@gmail.com>
  * Copyright (C) 2014 Henner Zeller <h.zeller@acm.org>
- * Copyright (C) 2014-2021 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 2014-2022 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software: you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -49,8 +49,9 @@ public:
      *
      * @param aNicknames is the list of library nicknames
      * @param aParent is the parent window to display the progress dialog
+     * @return false if loading was cancelled by the user
      */
-    void AddLibraries( const std::vector<wxString>& aNicknames, wxWindow* aParent );
+    bool AddLibraries( const std::vector<wxString>& aNicknames, wxWindow* aParent );
 
     void AddLibrary( wxString const& aLibNickname );
 

eeschema/symbol_viewer_frame.cpp

@@ -835,11 +835,16 @@ void SYMBOL_VIEWER_FRAME::OnSelectSymbol( wxCommandEvent& aEvent )
 
     // Container doing search-as-you-type.
     SYMBOL_LIB_TABLE* libs = Prj().SchSymbolLibTable();
-    wxObjectDataPtr<LIB_TREE_MODEL_ADAPTER> adapter =
-            SYMBOL_TREE_MODEL_ADAPTER::Create( this, libs );
+    wxObjectDataPtr<LIB_TREE_MODEL_ADAPTER> dataPtr
+                                    = SYMBOL_TREE_MODEL_ADAPTER::Create( this, libs );
+    SYMBOL_TREE_MODEL_ADAPTER* modelAdapter
+                                    = static_cast<SYMBOL_TREE_MODEL_ADAPTER*>( dataPtr.get() );
 
-    const auto libNicknames = libs->GetLogicalLibs();
-    static_cast<SYMBOL_TREE_MODEL_ADAPTER*>( adapter.get() )->AddLibraries( libNicknames, this );
+    if( !modelAdapter->AddLibraries( libs->GetLogicalLibs(), this ) )
+    {
+        // loading cancelled by user
+        return;
+    }
 
     LIB_SYMBOL* current = GetSelectedSymbol();
     LIB_ID id;
@@ -848,13 +853,13 @@ void SYMBOL_VIEWER_FRAME::OnSelectSymbol( wxCommandEvent& aEvent )
     if( current )
     {
         id = current->GetLibId();
-        adapter->SetPreselectNode( id, unit );
+        modelAdapter->SetPreselectNode( id, unit );
     }
 
     wxString dialogTitle;
-    dialogTitle.Printf( _( "Choose Symbol (%d items loaded)" ), adapter->GetItemCount() );
+    dialogTitle.Printf( _( "Choose Symbol (%d items loaded)" ), modelAdapter->GetItemCount() );
 
-    DIALOG_CHOOSE_SYMBOL dlg( this, dialogTitle, adapter, m_convert, false, false, false );
+    DIALOG_CHOOSE_SYMBOL dlg( this, dialogTitle, dataPtr, m_convert, false, false, false );
 
     if( dlg.ShowQuasiModal() == wxID_CANCEL )
         return;

eeschema/tools/ee_actions.cpp

@@ -692,6 +692,11 @@ TOOL_ACTION EE_ACTIONS::addNeededJunctions( "eeschema.InteractiveDrawingLineWire
         _( "Add Junctions to Selection where needed" ), "",
         BITMAPS::INVALID_BITMAP, AF_ACTIVATE );
 
+TOOL_ACTION EE_ACTIONS::trimOverlappingWires( "eeschema.InteractiveDrawingLineWireBus.trimOverlappingWires",
+        AS_ACTIVE, 0, "",
+        "", "",
+        BITMAPS::INVALID_BITMAP, AF_ACTIVATE );
+
 
 const DRAW_SEGMENT_EVENT_PARAMS drawWireActionParam = { LAYER_WIRE, false };
 TOOL_ACTION EE_ACTIONS::drawWire( "eeschema.InteractiveDrawingLineWireBus.drawWires",

eeschema/tools/ee_actions.h

@@ -73,6 +73,7 @@ public:
 
     // Schematic Tools
     static TOOL_ACTION addNeededJunctions;
+    static TOOL_ACTION trimOverlappingWires;
     static TOOL_ACTION pickerTool;
     static TOOL_ACTION placeSymbol;
     static TOOL_ACTION placePower;

eeschema/tools/ee_inspection_tool.cpp

@@ -517,13 +517,18 @@ int EE_INSPECTION_TOOL::ShowDatasheet( const TOOL_EVENT& aEvent )
 
         SCH_SYMBOL* symbol = (SCH_SYMBOL*) selection.Front();
 
-        datasheet = symbol->GetField( DATASHEET_FIELD )->GetText();
+        // Use GetShownText() to resolve any text variables
+        datasheet = symbol->GetField( DATASHEET_FIELD )->GetShownText();
     }
 
     if( datasheet.IsEmpty() || datasheet == wxT( "~" ) )
+    {
         m_frame->ShowInfoBarError( _( "No datasheet defined." ) );
+    }
     else
+    {
         GetAssociatedDocument( m_frame, datasheet, &m_frame->Prj() );
+    }
 
     return 0;
 }

eeschema/tools/ee_selection_tool.cpp

@@ -165,11 +165,11 @@ bool EE_SELECTION_TOOL::Init()
                                         SCH_GLOBAL_LABEL_T, SCH_HIER_LABEL_T, SCH_LABEL_T,
                                         SCH_SHEET_PIN_T, SCH_PIN_T, EOT };
 
-    auto wireSelection =      E_C::MoreThan( 0 ) && E_C::OnlyType( SCH_LINE_LOCATE_WIRE_T );
-    auto busSelection =       E_C::MoreThan( 0 ) && E_C::OnlyType( SCH_LINE_LOCATE_BUS_T );
-    auto wireOrBusSelection = E_C::MoreThan( 0 ) && E_C::OnlyTypes( wireOrBusTypes );
-    auto connectedSelection = E_C::MoreThan( 0 ) && E_C::OnlyTypes( connectedTypes );
-    auto sheetSelection =     E_C::Count( 1 )    && E_C::OnlyType( SCH_SHEET_T );
+    auto wireSelection =      E_C::Count( 1 ) && E_C::OnlyType( SCH_LINE_LOCATE_WIRE_T );
+    auto busSelection =       E_C::Count( 1 ) && E_C::OnlyType( SCH_LINE_LOCATE_BUS_T );
+    auto wireOrBusSelection = E_C::Count( 1 ) && E_C::OnlyTypes( wireOrBusTypes );
+    auto connectedSelection = E_C::Count( 1 ) && E_C::OnlyTypes( connectedTypes );
+    auto sheetSelection =     E_C::Count( 1 ) && E_C::OnlyType( SCH_SHEET_T );
 
     auto schEditSheetPageNumberCondition =
             [&] ( const SELECTION& aSel )
@@ -219,7 +219,7 @@ bool EE_SELECTION_TOOL::Init()
     menu.AddItem( EE_ACTIONS::finishBus,          SCH_LINE_WIRE_BUS_TOOL::IsDrawingBus, 100 );
 
     menu.AddSeparator( 200 );
-    menu.AddItem( EE_ACTIONS::selectConnection,   wireOrBusSelection && EE_CONDITIONS::Idle, 250 );
+    menu.AddItem( EE_ACTIONS::selectConnection,   connectedSelection && EE_CONDITIONS::Idle, 250 );
     menu.AddItem( EE_ACTIONS::placeJunction,      wireOrBusSelection && EE_CONDITIONS::Idle, 250 );
     menu.AddItem( EE_ACTIONS::placeLabel,         wireOrBusSelection && EE_CONDITIONS::Idle, 250 );
     menu.AddItem( EE_ACTIONS::placeGlobalLabel,   wireOrBusSelection && EE_CONDITIONS::Idle, 250 );
@@ -754,6 +754,11 @@ int EE_SELECTION_TOOL::Main( const TOOL_EVENT& aEvent )
 
 int EE_SELECTION_TOOL::disambiguateCursor( const TOOL_EVENT& aEvent )
 {
+    wxMouseState keyboardState = wxGetMouseState();
+
+    setModifiersState( keyboardState.ShiftDown(), keyboardState.ControlDown(),
+                       keyboardState.AltDown() );
+
     m_skip_heuristics = true;
     SelectPoint( m_originalCursor, EE_COLLECTOR::AllItems, nullptr, &m_canceledMenu, false,
                  m_additive, m_subtractive, m_exclusive_or );
@@ -853,10 +858,6 @@ void EE_SELECTION_TOOL::narrowSelection( EE_COLLECTOR& collector, const VECTOR2I
             else
                 line->SetFlags( STARTPOINT | ENDPOINT );
         }
-        else if( collector[i]->Type() == SCH_LINE_T )
-        {
-            static_cast<SCH_LINE*>( collector[i] )->SetFlags( STARTPOINT | ENDPOINT );
-        }
     }
 
     // Apply some ugly heuristics to avoid disambiguation menus whenever possible

eeschema/tools/sch_drawing_tools.cpp

@@ -62,6 +62,7 @@ SCH_DRAWING_TOOLS::SCH_DRAWING_TOOLS() :
         m_lastTextOrientation( LABEL_SPIN_STYLE::RIGHT ),
         m_lastTextBold( false ),
         m_lastTextItalic( false ),
+        m_mruPath( wxEmptyString ),
         m_inPlaceSymbol( false ),
         m_inPlaceImage( false ),
         m_inSingleClickPlace( false ),
@@ -278,12 +279,14 @@ int SCH_DRAWING_TOOLS::PlaceSymbol( const TOOL_EVENT& aEvent )
                     symbol->AutoplaceFields( /* aScreen */ nullptr, /* aManual */ false );
 
                 symbol->ClearEditFlags();
+                m_view->Update( symbol );
+                m_frame->GetScreen()->Update( symbol );
 
+                m_toolMgr->RunAction( EE_ACTIONS::trimOverlappingWires, true,
+                                      &m_selectionTool->GetSelection() );
                 m_toolMgr->RunAction( EE_ACTIONS::addNeededJunctions, true,
                                       &m_selectionTool->GetSelection() );
 
-                m_view->Update( symbol );
-                m_frame->GetScreen()->Update( symbol );
                 m_frame->OnModify();
 
                 SCH_SYMBOL* nextSymbol = nullptr;
@@ -487,7 +490,7 @@ int SCH_DRAWING_TOOLS::PlaceImage( const TOOL_EVENT& aEvent )
                 // having an auto-pan
                 EDA_RECT canvas_area = GetCanvasFreeAreaPixels();
 
-                wxFileDialog dlg( m_frame, _( "Choose Image" ), wxEmptyString, wxEmptyString,
+                wxFileDialog dlg( m_frame, _( "Choose Image" ), m_mruPath, wxEmptyString,
                                   _( "Image Files" ) + wxS( " " ) + wxImage::GetImageExtWildcard(),
                                   wxFD_OPEN );
 
@@ -508,6 +511,7 @@ int SCH_DRAWING_TOOLS::PlaceImage( const TOOL_EVENT& aEvent )
                 cursorPos = controls->GetMousePosition( true );
 
                 wxString fullFilename = dlg.GetPath();
+                m_mruPath = wxPathOnly( fullFilename );
 
                 if( wxFileExists( fullFilename ) )
                     image = new SCH_BITMAP( (wxPoint)cursorPos );

eeschema/tools/sch_drawing_tools.h

@@ -88,6 +88,7 @@ private:
     LABEL_SPIN_STYLE           m_lastTextOrientation;
     bool                       m_lastTextBold;
     bool                       m_lastTextItalic;
+    wxString                   m_mruPath;
 
     ///< Re-entrancy guards
     bool                       m_inPlaceSymbol;

eeschema/tools/sch_edit_tool.cpp

@@ -97,8 +97,8 @@ private:
 
         if( !symbol )
         {
-            Append( ID_POPUP_SCH_UNFOLD_BUS, _( "no symbol selected" ), wxEmptyString );
-            Enable( ID_POPUP_SCH_UNFOLD_BUS, false );
+            Append( ID_POPUP_SCH_SELECT_UNIT_CMP, _( "no symbol selected" ), wxEmptyString );
+            Enable( ID_POPUP_SCH_SELECT_UNIT_CMP, false );
             return;
         }
 
@@ -106,8 +106,8 @@ private:
 
         if( !symbol->GetLibSymbolRef() || symbol->GetLibSymbolRef()->GetUnitCount() < 2 )
         {
-            Append( ID_POPUP_SCH_UNFOLD_BUS, _( "symbol is not multi-unit" ), wxEmptyString );
-            Enable( ID_POPUP_SCH_UNFOLD_BUS, false );
+            Append( ID_POPUP_SCH_SELECT_UNIT_CMP, _( "symbol is not multi-unit" ), wxEmptyString );
+            Enable( ID_POPUP_SCH_SELECT_UNIT_CMP, false );
             return;
         }
 
@@ -445,7 +445,6 @@ int SCH_EDIT_TOOL::Rotate( const TOOL_EVENT& aEvent )
     int       principalItemCount = 0;  // User-selected items (as opposed to connected wires)
     wxPoint   rotPoint;
     bool      moving = false;
-    bool      connections = false;
 
     for( unsigned ii = 0; ii < selection.GetSize(); ii++ )
     {
@@ -511,6 +510,28 @@ int SCH_EDIT_TOOL::Rotate( const TOOL_EVENT& aEvent )
         }
 
         case SCH_LINE_T:
+        {
+            SCH_LINE* line = static_cast<SCH_LINE*>( head );
+
+            // Equal checks for both and neither. We need this because on undo
+            // the item will have both flags cleared, but will be selected, so it is possible
+            // for the user to get a selected line with neither endpoint selected. We
+            // set flags to make sure Rotate() works when we call it.
+            if( line->HasFlag( STARTPOINT ) == line->HasFlag( ENDPOINT ) )
+            {
+                line->SetFlags( STARTPOINT | ENDPOINT );
+                // When we allow off grid items, the rotPoint should be set to the midpoint
+                // of the line to allow rotation around the center, and the next if
+                // should become an else-if
+            }
+
+            if( line->HasFlag( STARTPOINT ) )
+                rotPoint = line->GetEndPoint();
+            else if( line->HasFlag( ENDPOINT ) )
+                rotPoint = line->GetStartPoint();
+        }
+
+            KI_FALLTHROUGH;
         case SCH_BUS_BUS_ENTRY_T:
         case SCH_BUS_WIRE_ENTRY_T:
             for( int i = 0; clockwise ? i < 3 : i < 1; ++i )
@@ -557,7 +578,6 @@ int SCH_EDIT_TOOL::Rotate( const TOOL_EVENT& aEvent )
             break;
         }
 
-        connections = head->IsConnectable();
         m_frame->UpdateItem( head, false, true );
     }
     else
@@ -636,7 +656,6 @@ int SCH_EDIT_TOOL::Rotate( const TOOL_EVENT& aEvent )
             }
         }
 
-        connections |= item->IsConnectable();
         m_frame->UpdateItem( item, false, true );
         updateItem( item, true );
     }
@@ -652,8 +671,8 @@ int SCH_EDIT_TOOL::Rotate( const TOOL_EVENT& aEvent )
         if( selection.IsHover() )
             m_toolMgr->RunAction( EE_ACTIONS::clearSelection, true );
 
-        if( connections )
-            m_frame->TestDanglingEnds();
+        m_frame->RecalculateConnections( LOCAL_CLEANUP );
+        m_frame->TestDanglingEnds();
 
         m_frame->OnModify();
     }
@@ -893,6 +912,7 @@ int SCH_EDIT_TOOL::RepeatDrawItem( const TOOL_EVENT& aEvent )
         EE_SELECTION new_sel;
         new_sel.Add( newItem );
 
+        m_toolMgr->RunAction( EE_ACTIONS::trimOverlappingWires, true, &new_sel );
         m_toolMgr->RunAction( EE_ACTIONS::addNeededJunctions, true, &new_sel );
 
         m_frame->RecalculateConnections( LOCAL_CLEANUP );
@@ -1680,7 +1700,12 @@ int SCH_EDIT_TOOL::BreakWire( const TOOL_EVENT& aEvent )
         m_frame->OnModify();
         m_frame->GetCanvas()->Refresh();
 
-        m_toolMgr->RunAction( EE_ACTIONS::drag );
+        SCH_MOVE_TOOL_PARAMS params;
+
+        params.appendToLastUndo = true;
+        params.placingNewItems = false;
+
+        m_toolMgr->RunAction( EE_ACTIONS::drag, true, &params );
     }
 
     return 0;

eeschema/tools/sch_editor_control.cpp

@@ -559,6 +559,10 @@ int SCH_EDITOR_CONTROL::ReplaceAndFindNext( const TOOL_EVENT& aEvent )
 
     if( item && item->Matches( data, sheet ) )
     {
+        SCH_ITEM* sch_item = static_cast<SCH_ITEM*>( item );
+
+        m_frame->SaveCopyInUndoList( sheet->LastScreen(), sch_item, UNDO_REDO::CHANGED, false );
+
         if( item->Replace( data, sheet ) )
         {
             m_frame->UpdateItem( item, false, true );
@@ -585,6 +589,9 @@ int SCH_EDITOR_CONTROL::ReplaceAll( const TOOL_EVENT& aEvent )
     auto doReplace =
             [&]( SCH_ITEM* aItem, SCH_SHEET_PATH* aSheet, wxFindReplaceData& aData )
             {
+                m_frame->SaveCopyInUndoList( aSheet->LastScreen(), aItem, UNDO_REDO::CHANGED,
+                                             modified );
+
                 if( aItem->Replace( aData, aSheet ) )
                 {
                     m_frame->UpdateItem( aItem, false, true );

eeschema/tools/sch_line_wire_bus_tool.cpp

@@ -472,6 +472,7 @@ int SCH_LINE_WIRE_BUS_TOOL::doDrawSegments( const std::string& aTool, int aType,
     SCH_LINE*             segment = nullptr;
     EE_GRID_HELPER        grid( m_toolMgr );
     KIGFX::VIEW_CONTROLS* controls = getViewControls();
+    bool                  forceHV = m_frame->eeconfig()->m_Drawing.hv_lines_only;
 
     auto setCursor =
             [&]()
@@ -554,7 +555,36 @@ int SCH_LINE_WIRE_BUS_TOOL::doDrawSegments( const std::string& aTool, int aType,
         cursorPos = (wxPoint) grid.BestSnapAnchor( cursorPos, LAYER_CONNECTABLE, segment );
         controls->ForceCursorPosition( true, cursorPos );
 
-        bool forceHV = m_frame->eeconfig()->m_Drawing.hv_lines_only;
+        // Need to handle change in H/V mode while drawing
+        if( forceHV != m_frame->eeconfig()->m_Drawing.hv_lines_only )
+        {
+            forceHV = m_frame->eeconfig()->m_Drawing.hv_lines_only;
+
+            // Need to delete extra segment if we have one
+            if( !forceHV && m_wires.size() >= 2 && segment != nullptr )
+            {
+                m_wires.pop_back();
+                m_selectionTool->RemoveItemFromSel( segment );
+                delete segment;
+
+                segment = m_wires.back();
+                segment->SetEndPoint( cursorPos );
+            }
+            // Add a segment so we can move orthogonally
+            else if( forceHV && segment )
+            {
+                segment->SetEndPoint( cursorPos );
+
+                // Create a new segment, and chain it after the current segment.
+                segment = static_cast<SCH_LINE*>( segment->Duplicate() );
+                segment->SetFlags( IS_NEW | IS_MOVING );
+                segment->SetStartPoint( cursorPos );
+                m_wires.push_back( segment );
+
+                m_selectionTool->AddItemToSel( segment, true /*quiet mode*/ );
+            }
+        }
+
 
         //------------------------------------------------------------------------
         // Handle cancel:
@@ -757,6 +787,9 @@ int SCH_LINE_WIRE_BUS_TOOL::doDrawSegments( const std::string& aTool, int aType,
                 segment = doUnfoldBus( net, contextMenuPos );
             }
         }
+        //------------------------------------------------------------------------
+        // Handle TOOL_ACTION special cases
+        //
         else if( evt->IsAction( &EE_ACTIONS::rotateCW ) || evt->IsAction( &EE_ACTIONS::rotateCCW ) )
         {
             if( m_busUnfold.in_progress )
@@ -973,6 +1006,50 @@ void SCH_LINE_WIRE_BUS_TOOL::finishSegments()
 }
 
 
+int SCH_LINE_WIRE_BUS_TOOL::TrimOverLappingWires( const TOOL_EVENT& aEvent )
+{
+    EE_SELECTION* aSelection = aEvent.Parameter<EE_SELECTION*>();
+    SCHEMATIC* sch = getModel<SCHEMATIC>();
+    SCH_SCREEN* screen = sch->CurrentSheet().LastScreen();
+
+    std::set<SCH_LINE*> lines;
+    EDA_RECT bb = aSelection->GetBoundingBox();
+
+    for( EDA_ITEM* item : screen->Items().Overlapping( SCH_LINE_T, bb ) )
+        lines.insert( static_cast<SCH_LINE*>( item ) );
+
+    for( unsigned ii = 0; ii < aSelection->GetSize(); ii++ )
+    {
+        SCH_ITEM* item = dynamic_cast<SCH_ITEM*>( aSelection->GetItem( ii ) );
+        std::vector<wxPoint> pts = item->GetConnectionPoints();
+
+        if( !item || !item->IsConnectable() || ( item->Type() == SCH_LINE_T ) )
+            continue;
+
+        /// If the line intersects with an item in the selection at only two points,
+        /// then we can remove the line between the two points.
+        for( SCH_LINE* line : lines )
+        {
+            std::vector<wxPoint> conn_pts;
+
+            for( wxPoint pt : pts )
+            {
+                if( IsPointOnSegment( line->GetStartPoint(), line->GetEndPoint(), pt ) )
+                    conn_pts.push_back( pt );
+
+                if( conn_pts.size() > 2 )
+                    break;
+            }
+
+            if( conn_pts.size() == 2 )
+                m_frame->TrimWire( conn_pts[0], conn_pts[1] );
+        }
+    }
+
+    return 0;
+}
+
+
 int SCH_LINE_WIRE_BUS_TOOL::AddJunctionsIfNeeded( const TOOL_EVENT& aEvent )
 {
     EE_SELECTION* aSelection = aEvent.Parameter<EE_SELECTION*>();
@@ -980,6 +1057,12 @@ int SCH_LINE_WIRE_BUS_TOOL::AddJunctionsIfNeeded( const TOOL_EVENT& aEvent )
     std::vector<wxPoint> pts;
     std::vector<wxPoint> connections = m_frame->GetSchematicConnections();
 
+    std::set<SCH_LINE*> lines;
+    EDA_RECT bb = aSelection->GetBoundingBox();
+
+    for( EDA_ITEM* item : m_frame->GetScreen()->Items().Overlapping( SCH_LINE_T, bb ) )
+        lines.insert( static_cast<SCH_LINE*>( item ) );
+
     for( unsigned ii = 0; ii < aSelection->GetSize(); ii++ )
     {
         SCH_ITEM* item = dynamic_cast<SCH_ITEM*>( aSelection->GetItem( ii ) );
@@ -1002,15 +1085,6 @@ int SCH_LINE_WIRE_BUS_TOOL::AddJunctionsIfNeeded( const TOOL_EVENT& aEvent )
                     pts.push_back( pt );
             }
         }
-        else
-        {
-            // Clean up any wires that short non-wire connections in the list
-            for( auto pt = new_pts.begin(); pt != new_pts.end(); pt++ )
-            {
-                for( auto secondPt = pt + 1; secondPt != new_pts.end(); secondPt++ )
-                    m_frame->TrimWire( *pt, *secondPt );
-            }
-        }
     }
 
     // We always have some overlapping connection points.  Drop duplicates here
@@ -1035,6 +1109,7 @@ int SCH_LINE_WIRE_BUS_TOOL::AddJunctionsIfNeeded( const TOOL_EVENT& aEvent )
 void SCH_LINE_WIRE_BUS_TOOL::setTransitions()
 {
     Go( &SCH_LINE_WIRE_BUS_TOOL::AddJunctionsIfNeeded, EE_ACTIONS::addNeededJunctions.MakeEvent() );
+    Go( &SCH_LINE_WIRE_BUS_TOOL::TrimOverLappingWires, EE_ACTIONS::trimOverlappingWires.MakeEvent() );
     Go( &SCH_LINE_WIRE_BUS_TOOL::DrawSegments,         EE_ACTIONS::drawWire.MakeEvent() );
     Go( &SCH_LINE_WIRE_BUS_TOOL::DrawSegments,         EE_ACTIONS::drawBus.MakeEvent() );
     Go( &SCH_LINE_WIRE_BUS_TOOL::DrawSegments,         EE_ACTIONS::drawLines.MakeEvent() );

eeschema/tools/sch_line_wire_bus_tool.h

@@ -93,6 +93,11 @@ public:
      */
     int AddJunctionsIfNeeded( const TOOL_EVENT& aEvent );
 
+    /**
+     * Logic to remove wires when overlapping correct items
+     */
+    int TrimOverLappingWires( const TOOL_EVENT& aEvent );
+
 private:
     int       doDrawSegments( const std::string& aTool, int aType, bool aQuitOnDraw );
     SCH_LINE* startSegments( int aType, const VECTOR2D& aPos );

eeschema/tools/sch_move_tool.cpp

@@ -88,6 +88,7 @@ int SCH_MOVE_TOOL::Main( const TOOL_EVENT& aEvent )
     KIGFX::VIEW_CONTROLS* controls = getViewControls();
     EE_GRID_HELPER        grid( m_toolMgr );
     bool                  wasDragging = m_moveInProgress && m_isDrag;
+    SCH_MOVE_TOOL_PARAMS* params = aEvent.Parameter<SCH_MOVE_TOOL_PARAMS*>();
 
     m_anchorPos.reset();
 
@@ -174,8 +175,11 @@ int SCH_MOVE_TOOL::Main( const TOOL_EVENT& aEvent )
             if( !m_moveInProgress )    // Prepare to start moving/dragging
             {
                 SCH_ITEM* sch_item = (SCH_ITEM*) selection.Front();
-                bool      appendUndo = sch_item && sch_item->IsNew();
-                bool      placingNewItems = sch_item && sch_item->IsNew();
+                bool      appendUndo =
+                        params ? params->appendToLastUndo : ( sch_item && sch_item->IsNew() );
+                bool placingNewItems =
+                        params ? params->placingNewItems : ( sch_item && sch_item->IsNew() );
+
 
                 //------------------------------------------------------------------------
                 // Setup a drag or a move
@@ -446,6 +450,11 @@ int SCH_MOVE_TOOL::Main( const TOOL_EVENT& aEvent )
                 }
             }
         }
+        else if( evt->IsAction( &EE_ACTIONS::highlightNet )
+                    || evt->IsAction( &EE_ACTIONS::explicitCrossProbe ) )
+        {
+            // These don't make any sense during a move.  Eat them.
+        }
         //------------------------------------------------------------------------
         // Handle context menu
         //
@@ -505,6 +514,7 @@ int SCH_MOVE_TOOL::Main( const TOOL_EVENT& aEvent )
                 m_frame->AddJunction( m_frame->GetScreen(), it.GetPosition(), true, false );
         }
 
+        m_toolMgr->RunAction( EE_ACTIONS::trimOverlappingWires, true, &selectionCopy );
         m_toolMgr->RunAction( EE_ACTIONS::addNeededJunctions, true, &selectionCopy );
 
         m_frame->RecalculateConnections( LOCAL_CLEANUP );
@@ -917,6 +927,7 @@ int SCH_MOVE_TOOL::AlignElements( const TOOL_EVENT& aEvent )
     }
 
     m_toolMgr->PostEvent( EVENTS::SelectedItemsMoved );
+    m_toolMgr->RunAction( EE_ACTIONS::trimOverlappingWires, true, &selection );
     m_toolMgr->RunAction( EE_ACTIONS::addNeededJunctions, true, &selection );
 
     m_frame->RecalculateConnections( LOCAL_CLEANUP );

eeschema/tools/sch_move_tool.h

@@ -40,6 +40,13 @@ struct SPECIAL_CASE_LABEL_INFO
 };
 
 
+struct SCH_MOVE_TOOL_PARAMS
+{
+    bool appendToLastUndo;
+    bool placingNewItems;
+};
+
+
 class SCH_MOVE_TOOL : public EE_TOOL_BASE<SCH_EDIT_FRAME>
 {
 public:

eeschema/tools/symbol_editor_control.cpp

@@ -160,7 +160,7 @@ int SYMBOL_EDITOR_CONTROL::AddSymbol( const TOOL_EVENT& aEvent )
 
         if( libName.IsEmpty() )
         {
-            msg.Printf( _( "No symbol library selected." ), libName );
+            msg.Printf( _( "No symbol library selected." ) );
             m_frame->ShowInfoBarError( msg );
             return 0;
         }
@@ -255,10 +255,17 @@ int SYMBOL_EDITOR_CONTROL::DuplicateSymbol( const TOOL_EVENT& aEvent )
     if( m_frame->IsType( FRAME_SCH_SYMBOL_EDITOR ) )
     {
         SYMBOL_EDIT_FRAME* editFrame = static_cast<SYMBOL_EDIT_FRAME*>( m_frame );
+        LIB_ID             sel = editFrame->GetTargetLibId();
+        wxString           msg;
+
+        if( !sel.IsValid() )
+        {
+            msg.Printf( _( "No symbol selected" ) );
+            m_frame->ShowInfoBarError( msg );
+            return 0;
+        }
 
-        LIB_ID          sel = editFrame->GetTreeLIBID();
         const wxString& libName = sel.GetLibNickname();
-        wxString        msg;
 
         if( editFrame->GetLibManager().IsLibraryReadOnly( libName ) )
         {

eeschema/tools/symbol_editor_edit_tool.cpp

@@ -445,7 +445,7 @@ int SYMBOL_EDITOR_EDIT_TOOL::Properties( const TOOL_EVENT& aEvent )
             break;
 
         default:
-            wxFAIL_MSG( wxT( "Unhandled item <wxT( " ) + item->GetClass() + wxT( " )>" ) );
+            wxFAIL_MSG( wxT( "Unhandled item <" ) + item->GetClass() + wxT( ">" ) );
             break;
         }
     }

eeschema/tools/symbol_editor_move_tool.cpp

@@ -122,7 +122,7 @@ int SYMBOL_EDITOR_MOVE_TOOL::Main( const TOOL_EVENT& aEvent )
     if( !selection.Front()->IsNew() )
         saveCopyInUndoList( m_frame->GetCurSymbol(), UNDO_REDO::LIBEDIT );
 
-    m_cursor = controls->GetCursorPosition();
+    m_cursor = controls->GetCursorPosition( !aEvent.DisableGridSnapping() );
 
     // Main loop: keep receiving events
     do
@@ -188,7 +188,7 @@ int SYMBOL_EDITOR_MOVE_TOOL::Main( const TOOL_EVENT& aEvent )
 
                 // Set up the starting position and move/drag offset
                 //
-                m_cursor = controls->GetCursorPosition();
+                m_cursor = controls->GetCursorPosition( !evt->DisableGridSnapping() );
 
                 if( lib_item->IsNew() )
                 {
@@ -214,7 +214,7 @@ int SYMBOL_EDITOR_MOVE_TOOL::Main( const TOOL_EVENT& aEvent )
                 }
                 else
                 {
-                    m_cursor = getViewControls()->GetCursorPosition( true );
+                    m_cursor = controls->GetCursorPosition( !evt->DisableGridSnapping() );
                     m_anchorPos = m_cursor;
                 }
 
@@ -229,7 +229,7 @@ int SYMBOL_EDITOR_MOVE_TOOL::Main( const TOOL_EVENT& aEvent )
             //------------------------------------------------------------------------
             // Follow the mouse
             //
-            m_cursor = controls->GetCursorPosition();
+            m_cursor = controls->GetCursorPosition( !evt->DisableGridSnapping() );
             VECTOR2I delta( m_cursor - prevPos );
             m_anchorPos = m_cursor;
 

gerbview/events_called_functions.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2011-2014 Jean-Pierre Charras  jp.charras at wanadoo.fr
- * Copyright (C) 1992-2021 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 1992-2022 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -76,6 +76,7 @@ BEGIN_EVENT_TABLE( GERBVIEW_FRAME, EDA_DRAW_FRAME )
                 GERBVIEW_FRAME::OnSelectHighlightChoice )
     EVT_CHOICE( ID_ON_ZOOM_SELECT, GERBVIEW_FRAME::OnSelectZoom )
     EVT_CHOICE( ID_ON_GRID_SELECT, GERBVIEW_FRAME::OnSelectGrid )
+    EVT_MENU( ID_GRID_SETTINGS, GERBVIEW_FRAME::OnGridSettings )
 
     EVT_UPDATE_UI( ID_ON_GRID_SELECT, GERBVIEW_FRAME::OnUpdateSelectGrid )
     EVT_UPDATE_UI( ID_TOOLBARH_GERBER_SELECT_ACTIVE_DCODE, GERBVIEW_FRAME::OnUpdateSelectDCode )

gerbview/gerbview_printout.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2016 Jean-Pierre Charras, jp.charras at wanadoo.fr
- * Copyright (C) 1992-2016 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 1992-2022 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -38,6 +38,7 @@ GERBVIEW_PRINTOUT::GERBVIEW_PRINTOUT( GBR_LAYOUT* aLayout, const BOARD_PRINTOUT_
     BOARD_PRINTOUT( aParams, aView, aTitle )
 {
     m_layout = aLayout;
+    m_gerbviewPrint = true;
 }
 
 

include/board_printout.h

@@ -1,8 +1,8 @@
 /*
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
- * Copyright (C) 2009 Jean-Pierre Charras, jean-pierre.charras@ujf-grenoble.fr
- * Copyright (C) 1992-2021 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 2009 Jean-Pierre Charras, jean-pierre.charras at wanadoo.fr
+ * Copyright (C) 1992-2022 KiCad Developers, see AUTHORS.txt for contributors.
  * Copyright (C) 2018 CERN
  * Author: Maciej Suminski <maciej.suminski@cern.ch>
  *
@@ -119,6 +119,9 @@ protected:
 
     ///< Printout parameters
     BOARD_PRINTOUT_SETTINGS m_settings;
+
+    /// True if the caller is Gerbview, false for Pcbnew
+    bool  m_gerbviewPrint;
 };
 
 #endif      // BOARD_PRINTOUT_H

include/eda_shape.h

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2018 Jean-Pierre Charras jp.charras at wanadoo.fr
- * Copyright (C) 1992-2021 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 1992-2022 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -59,6 +59,15 @@ enum class FILL_T : int
 };
 
 
+// Holding struct to keep originating midpoint
+struct ARC_MID
+{
+    wxPoint mid;
+    wxPoint start;
+    wxPoint end;
+    wxPoint center;
+};
+
 class EDA_SHAPE
 {
 public:
@@ -187,6 +196,17 @@ public:
      */
     void SetArcGeometry( const wxPoint& aStart, const wxPoint& aMid, const wxPoint& aEnd );
 
+    /**
+     * Set the data used for mid point caching.  If the controlling points remain constant, then
+     * we keep the midpoint the same as it was when read in.  This minimizes VCS churn
+     *
+     * @param aStart Cached start point
+     * @param aMid Cached mid point
+     * @param aEnd Cached end point
+     * @param aCenter Calculated center point using the preceeding three
+     */
+    void SetCachedArcData( const wxPoint& aStart, const wxPoint& aMid, const wxPoint& aEnd, const wxPoint& aCenter );
+
     const std::vector<wxPoint>& GetBezierPoints() const { return m_bezierPoints; }
 
     /**
@@ -214,11 +234,11 @@ public:
 
     void SetPolyShape( const SHAPE_POLY_SET& aShape ) { m_poly = aShape; }
 
-    void SetBezierPoints( const std::vector<wxPoint>& aPoints ) { m_bezierPoints = aPoints; }
+    void SetPolyPoints( const std::vector<wxPoint>& aPoints );
 
     /**
-     * Rebuild the m_BezierPoints vertex list that approximate the Bezier curve
-     * by a list of segments.
+     * Rebuild the m_bezierPoints vertex list that approximate the Bezier curve by a list of
+     * segments.
      *
      * Has meaning only for BEZIER shape.
      *
@@ -228,8 +248,6 @@ public:
      */
     void RebuildBezierToSegmentsPointsList( int aMinSegLen );
 
-    void SetPolyPoints( const std::vector<wxPoint>& aPoints );
-
     /**
      * Make a set of SHAPE objects representing the EDA_SHAPE.  Caller owns the objects.
      */
@@ -305,6 +323,7 @@ protected:
     wxPoint              m_end;          // Line end point or Circle 3 o'clock point
 
     wxPoint              m_arcCenter;    // Used only for Arcs: arc end point
+    ARC_MID              m_arcMidData;        // Used to store originating data
 
     wxPoint              m_bezierC1;     // Bezier Control Point 1
     wxPoint              m_bezierC2;     // Bezier Control Point 2

include/id.h

@@ -216,7 +216,9 @@ enum main_id
 
     // Reseve ID for popup menus, when we need to know a menu item is inside a popup menu
     ID_POPUP_MENU_START,
-    ID_POPUP_MENU_END = ID_POPUP_MENU_START + 1000,
+    // The extra here need to minimum be larger than MAX_BUS_UNFOLD_MENU_ITEMS + MAX_UNIT_COUNT_PER_PACKAGE
+    // These values are stored in eeschema_id.h
+    ID_POPUP_MENU_END = ID_POPUP_MENU_START + 2048,
 
     ID_END_LIST
 };

include/paths.h

@@ -121,6 +121,16 @@ public:
      */
     static wxString GetStockDemosPath();
 
+    /**
+     * Gets the stock (install) templates path
+     */
+    static wxString GetStockTemplatesPath();
+
+    /**
+     * Gets the locales translation data path
+     */
+    static wxString GetLocaleDataPath();
+
     /**
      * Gets the stock (install) 3d viewer plugins path
      */

include/settings/settings_manager.h

@@ -276,23 +276,27 @@ public:
     /**
      * Saves a loaded project.
      * @param aFullPath is the project name to save.  If empty, will save the first loaded project.
+     * @param aProject is the project to save, or nullptr to save the active project (Prj() return)
      * @return true if save was successful
      */
-    bool SaveProject( const wxString& aFullPath = wxEmptyString );
+    bool SaveProject( const wxString& aFullPath = wxEmptyString, PROJECT* aProject = nullptr );
 
     /**
      * Sets the currently loaded project path and saves it (pointers remain valid)
      * Note that this will not modify the read-only state of the project, so it will have no effect
      * if the project is marked as read-only!
      * @param aFullPath is the full filename to set for the project
+     * @param aProject is the project to save, or nullptr to save the active project (Prj() return)
      */
-    void SaveProjectAs( const wxString& aFullPath );
+    void SaveProjectAs( const wxString& aFullPath, PROJECT* aProject = nullptr );
 
     /**
      * Saves a copy of the current project under the given path.  Will save the copy even if the
      * current project is marked as read-only.
+     * @param aFullPath is the full filename to set for the project
+     * @param aProject is the project to save, or nullptr to save the active project (Prj() return)
      */
-    void SaveProjectCopy( const wxString& aFullPath );
+    void SaveProjectCopy( const wxString& aFullPath, PROJECT* aProject = nullptr );
 
     /**
      * @return the full path to where project backups should be stored