Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame.
The desire is to migrate designs *away from* case independence, and to create
designs which use literally (case specific) interpreted component names. But for
backwards compatibility, you may turn OFF this option if you really must.
(Remember that with KiCad using text data files, typically you would be better
off simply doctoring those files into a case literal state with a text editor
and move forward into the brave new world of case specificity. Also, BOM
generators may not work properly when you have this option turned OFF, the xml
export's referential integrity is broken on library part name. Hence the default
is ON now, as of 29-Jan-2014.
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame
dialog fp lib table display not updated (Windows specific) when an option is changed from the lib table option editor
overloaded function in dialog_fp_lib_table.cpp not compiled with gcc 4.4.7 (try to fix Bug #1262002).
specctra_export.cpp: set min dist to find segment ends when building the board outline to 2 microns (should break anything, but should be enough to fix rounding issues when creating/importing board outlines with arcs)
Pcbnew:, libedit, Save lib as...: the new .pretty lib format is the default, instead of legacy .mod format. The legacy format is still selectable in the file selection dialog.
* Change general properties dialog to allow for entry of arbitrary rotation
angles for greater than 0 to 90.
* Move global rotation angle variable into PCB_EDIT_FRAME object where it is
used and add accessors.
* Change rotate footprint undo operation from UR_ROTATE_XXXX to UR_CHANGE.
* Create function to remove trailing zeros from floating point wxString
objects.
* Make GPCB_PLUGIN::EnumerateFootprints() read the directory contents
instead of loading the entire cache.
* Make KICAD_PLUGIN::EnumerateFootprints() read the directory contents
instead of loading the entire cache.
* Make GPCB_PLUGIN::EnumerateFootprints() read the directory contents
instead of loading the entire cache.
* Make KICAD_PLUGIN::EnumerateFootprints() read the directory contents
instead of loading the entire cache.
* Prevent cache from being reloaded on every footprint file read.
* Fix a bug forming wxFileName in GPCB_FP_CACHE::Load().
* Fix invalid file name time stamp debug assertion.
* Use FPID to set loaded footprint name.
* Remove file name <> from exception strings per UIPolicy.
To use multiple working threads. This entailed adding KiCad typedefs:
*) Add typedefs for MUTEX and MUTLOCK which mask the actual choices for the project.
*) Add FOOTPRINT_LIST::DisplayErrors( wxWindow* ) which is a single strategy for
showing aggregated load errors. Although what's there is only scaffolding
and needs a volunteer who knows HTML pretty well.
*) Ensure all callers of ReadFootprintFiles() use the new DisplayErrors() function.
*) Push utf8.cpp and utf8.h into common library for open use.
* Make the tool bar dockable.
* Enable the overflow control in the tool bar in case the it does not fit in
it's parent window.
* Fix some wxAuiPaneInfo usage issues.
* Remove unused wxAuiPaneInfo objects.
* Move perspective saving and loading into EDA_BASE_FRAME object in preparation
for extending this to all frame windows.
Moved scaling of font glyphs to the moment when they are created (eliminated a few multiplications unnecessary variables).
Changed some magic numbers into constants.
*) Add scripts/library-repos-install.sh for downloading *.pretty libraries and possibly using them.
*) Remove template/fp-* files, they are now at https://github.com/KiCad/kicad-library/template/*
so they can be maintained by the library team. However note that it is possible to break
kicad-install.sh with uncoordinated changes to that github repo.
It is best to delete your ~/kicad_sources/kicad-lib.bzr directory before running kicad-install.sh
at this or any newer version relative to an older library repo.
* Replace illegal file system characters when reading legacy libraries to
prevent FPID parsing errors and allow saving to PRETTY file format.
* Create validator to filter illegal file system characters from footprint
name text edit controls to prevent issues when saving to PRETTY file format.
* Add missing source file licenses and some minor coding policy fixes.
Now footprints, after loaded by reading a netlist are grouped by sheets by the footprints spread function, and the grouping is better.
Rename 2 files. Fix minor issues. Clean code
comment for GITHUB_PLUGIN which should flow into Doxygen output.
*) Rewrote:
PCB_BASE_FRAME::Save_Module_In_Library(): now uses fp-lib-table and PROPERTIES.
PCB_EDIT_FRAME::ArchiveModulesOnBoard(): now can archive to any writable library type.
PCB_BASE_FRAME::SelectLibrary(): is now generic for selecting a library, not just the active library.
Pcbnew: Code cleaning and bug fix in autoplace functions
Dialog exchange footprints has now a separate button to update the .cmp file, only on request.
FIX: unique renaming of eagle footprints by substituting illegal : and / with URL encoding technique.
ADD: window resize border to DisplayError() windows.
* Make spacing between controls and dialog frame consistent.
* Use default size to allow wxWigdets to determine optimal dialog size.
* Set OK button as default so return key works properly.
* Use std::swap for PCB_LINE_T items in SwapData().
* Use std::swap for PCB_MODULE_EDGE_T items in SwapData().
* Add assignment operator to EDGE_MODULE object.
* Move code from copy method to assignment operator.
* Minor coding policy fixes.
columns. DIALOG_SHIM would resize each separate usage to the same
size. DIALOG_SHIM now supports and alternate m_hash_key in lieu
of the class name, optionally.
* Add build type (debug/release) for wxWidgets library versions greater
than 2.8.
* Add build type (debug/release) for KiCad.
* Add missing build options.
build, it throws the time stamps away when there are edits to the CMakeLists.txt portion
pertaining to the external project. Only a 'make clean' would remove the untarred tree.
This patch removes the need to do a make clean when changing the ExternalProject_Add()
text pertinent to patching.
Fixes bug 1250222 in KiCad-Winbuilder
* Pcbnew: catch exceptions when saving changes to footprint library table.
* Pcbnew: update footprint viewer library list if open when footprint library
table changes.
* CvPcb: update library list when footprint library table changes.
* Minor coding policy fixes.
*) Move button handlers to LEFT MOUSE CLICK from COMMAND events, so wxGrid focus is not lost.
*) Sketch out the concept of COW support for the GITHUB_PLUGIN in its @todo.
This is so builders with multiple out of source build trees can all use
the same common boost install directory. And the build system will not
vascillate between the fuller and lesser subsets of boost.
This response file is not expanded under mingw3 2 (mingw/gcc bug?), and the list of include paths, found in this file, is not taken in account.
Now, under mingw32+msys, when not cross-compiling, the response file is disabled.
Cvpcb, Pcbnew: fix a list of libs which should be added only when cross-compiling:
Previously, they were always added, which creates an issue with mingw/msy/ gcc 2.8.
Now they are added only when cross-compiling (this issue was noticeable only with msys+mingw version 2.8)
* Replace all occurrences of the word "part" with "unit" when referring to
multiple unit components for improved consistency.
* Replace "shared by" with "common to" when referring to objects (lines, arcs,
pins, etc.) that are common to all units.
* Improve wording in library component properties dialog.
Mingw, all: remove static link of libgcc, which can create issues when using dll version of wxWidgets.
Therefore libgcc_s_dw2-1.dll should be in the paths for executables.
Eagle plugin: filter and replace not allowed chars in FPID(-':' and '/') by _ or -, if they are used in Eagle footprint names (otherwise, boards converted and saved under kicad_pcb format are not readable by Pcbnew).
pass into an HTML rendering panel and otherwise look goofey.
*) Implement BOARD::Move() can call it from EAGLE_PLUGIN::Load().
*) When USE_FP_LIB_TABLE, tolerate blank nicknames in FPIDs coming from eeschema.
See the switch for this in pcbnew/netlist.cpp as ALLOW_PARTIAL_FPID.
*) Add an assert and a try catch block to figure out that View does not
like some eagle pcb board. bitset::set() is getting a -1 value and firing
an exception.
* Fix replace bug to handle case sensitivity properly.
* Fix replace bug where the item index was getting updated incorrectly.
* Fix replace infinite loop bug on replace all.
* Make find/replace view update code a separate function.
* Rearrange find/replace trace string to add tracing to EDA_ITEM::Replace().
* Add IsComplexHierarchy method to SCH_SHEET_LIST for future find/replace
improvements.
Fix issues created by this patch.
Note, this fix slightly changes the vertical position of these texts.
This is not really a problem in eeschema, but in pcbnew this is perhaps more annoying, if the verical multiline text is critical.
Fix a very minor issue for vertical justification of single line texts in dxf import.
Page layout editor: Add bitmap items to the page layout existing items.
Now a bitmap image can be added to a page layout description. Currently the bitmap is expected having a 300 ppi definition.
Note: not all plotters can plot a bitmap, and in this case the bounding box is plotted instead of the bitmap
* Create a generic yes/no/cancel dialog from DIALOG_EXIT.
* Make DIALOG_EXIT return wxID_YES instead of wxID_OK so it is consistent
with the standard message dialogs.
* Add missing license to confirm.h and confirm.cpp.
* Change Eeschema message dialog when loading a schematic if the current
schematic is modified to be more consistent with the exit dialog.
* Change Pcbnew message dialog when loading a board if the current board
is modified to be more consistent with the exit dialog.
* Remove some Eeschema block debug logging code left over from my last
commit.
* Merge HandleBlockEnd() and HandleBlockEndByPopUp() into as single block
end function HandleBlockEnd().
* Replace all instances of HandleBlockEndByPopUp() with HandleBlockEnd().
* Change block hot keys to send command events instead of directly calling
end block handler.
*) Set environment variable KISYSMOD before loading FP_LIB_TABLE so that
FP_LIB_TABLE::ROW::SetFullURI() can do substitution up front.
*) De-emphasize the lib path in some of the footprint frames but keep it
so the footprint editor can export a current library to another.
You can even export a GITHUB library to a pretty library for local
installation.
*) Start the PLUGIN options editor.
*) Enhance cursor positioning in DIALOG_FP_LIB_TABLE.
inside the main board outlines.
specctra_export.cpp: always approximate arcs in outlines by 36 segm for 360 degrees,
even for arc angle which differs from 90 degrees.
90 degrees is the default when creating an arc, but the arc value can be edited and have any value between 0 and 360 degrees.
Previously, 9 segments were used regardless the arc angle.
* Add save table and set project path environment variable code to
FP_LIB_TABLE object.
* Add code to Pcbnew and CvPcb to set project path environment variable.
* Create empty footprint table in Pcbnew when new board created.
* Save current project specific footprint library table to path on file save
as or empty project path.
* Fix a bug in Pcbnew in file save function that would silently overwrite
an existing board file.
* Disable selecting the current library in the module editor when there are
no libraries defined.
* Catch exceptions and report errors when writing footprint library tables.
* Fix Boost build CMakeFile to fix bug when bootstrapping a Boost build in
MSys.
Remove KICAD_GOST option because it is now useless: the 2 GOST options are now selectable at run time and are:
* specific page layouts (now user definable, and the GOST page layouts are available in template folder)
* notation for multiple parts per package (made in eeschema, preference menu)
* Pre-built binaries for OpenSSL can be used from the LuaDist project: https://github.com/LuaDist/openssl/releases
* Building of Boost libraries fixed for Mingw-w64 for github plugin
* Don't convert footprint library path to wxFileName. This removes a '/'
from the GIT_HUB_PLUGIN uri which causes wxUri to choke and the incorrect
plug in is selected.
We can now remove a few calls to FP_LIB_TABLE::ExpandSubstitutions( const wxString& aString )
since its being done in above function.
DIALOG_FP_LIB_TABLE now handles table to copy cut copy paste from global to
project and reverse. Fixed a problem with cursor position management when
switching between tables.
Paste popup menu in this dialog now allows pasting a (fp_lib_table)
s-expression element holding (lib) elements. This provides an
opportunity for GITHUB library publishers to put the table description
into their README.md file as a (fp_lib_table) element where it can
be quickly copied to clipboard and pasted into the fp lib table dialog.
This is a paste operation, and overwrites from the initial cursor position.
Enhancement in Excellon file reader: accept Feed Rate and Spindle Speed definitions in Tool information line (but does not use them)
Eeschema: better name for m_SheetList (changed to m_SheetPath) member of class NETLIST_OBJECT.
* Use wxAuiManager perspective to save and load window settings which should
allow us to start using more advanced wxAui features like detachable tool
bars and windows.
* Remove sash size change events, event handler, and sash width clamping code
since it didn't work all that well anyway.
* Disable the close button on the footprint view pane.
* Update the footprint list box selection when iterating the list using the
tool bar arrow buttons.
* Merge code from modview.cpp into modview_frame.cpp and remove modview.cpp.
TOOL_ACTIONs can be run from CONTEXT_MENU after adding them.
Move tool actions are available to be run from CONTEXT_MENU displayed after right mouse button click on selected items.
Added some asserts to check the code.
Mainly, fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
Netlist generation code still needs some code enhancement (mainly removing the global g_NetObjectslist variable).
Fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
Write parser and formatter for options. Write dialog verification used before saving
FP_LIB_TABLEs, triggered from OK button in table editor.
Switch PROPERTY's value column to std::string from wxString.
Add event handler to fp lib table dialog for upcoming options dialog.
* When loading footprint do not retest every footprint in cache. Only test
the footprint being loaded. Fixes long load times on libraries with a lot
of parts.
* Fix footprint name bug where file extension was added to the end of the
footprint name.
* Fix bug in path equivalence test due to Posix path separators in footprint
library table. Convert paths to native separator before comparison.
* Fix a bug in FOOTPRINT_VIEWER_FRAME::OnActivate() which cause the footprint
list to always get reloaded when using footprint library tables.
* Remove some unnecessary debugging messages.
* Add a few Doxygen comments to FP_CACHE in kicad_plugin.cpp.
Enhance IO_MGR::GuessPluginTypeFromLibPath() to support the GITHUB plugin.
Build boost with -fPIC on Linux unconditionally, in preparation for
DLL/DSO build of kicad.
Add python script to test back to back reads of GITHUB plugin.
* Make footprint editor work properly with library table.
* Fix bug in Eagle plugin when comparing file timestamps.
* Fix bug in footprint viewer when error occur loading footprints from
the selected library.
* Fix error message display by in footprint viewer on library load error.
* Make footprint viewer work properly with library table.
* Fix bug in Eagle plugin when enumerating footprints.
* Add missing P-CAD plugin from footprint library table editing dialog.
* Fix bug in FOOTPRINT_INFO::LoadLibraries when error occur loading footprints
from libraries.
1. block created from-left-to-right selects only 100%inside selection objects (as it now does)
2.block created from-right-to-left selects all overlapping objects inside selection
From the patch sent by mathieulj (mathieulj), and some fixes and code cleaning.
pcbnew.py + doxygen-xml files, and build .i files with docstrings,
those .i files are included back again to build a pcbnew.py with
extended documentation from C++, finally we take the final pcbnew.py
to build the doxygen-python documentation
(useful for boards having more than 2 layers)
Eeschema:fix compatibility with old schematic files, when they contain ERC markers.
Pcbnew: better test for allowed layers when creating/editing Dimensions and some other Graphic items
Drc: fix comments and messages for some drc tests.
Fix minor bugs in cleanup dialog options and plot solder mask function (thanks to Lorenzo to locate these bugs)
* Add code to CvPcb to handle assigning component footprints from the
footprint library table instead of the search path method.
* Add code to CvPcb to allow editing of the footprint library table.
* CvPcb footprint and component panes display fully qualified FPID names.
* Make CvPcb library pane display footprint library table nicknames instead
of library file names.
* Add code to FP_LIB_TABLE object to test the paths in the table against the
list of libraries loaded from the project file.
* Add code to FP_LIB_TABLE to convert assigned footprints in a NETLIST from
legacy format to footprint library table format.
* Split out COMPONENT_NET, COMPONENT, and NETLIST objects from netlist_reader
files and create new pcb_netlist files.
* Fix minor wxListView scroll bar sizing issues.
* Add new token and code to save and load FPID nickname in board file.
* Add new token and code to save and load FPID nickname in s-expression net
list file.
* Add WX_STRING_REPORT object to dump strings to a wxString object.
Redraws can be requested way too often than it is required. This commit adds redraw timeout:
- if the view became dirty and there has been no redraw for longer than certain time, it is redrawed immediately
- otherwise, we wait for the next frame
This in general improves smoothness of rendering.
Pcbnew: better test for allowed layers when creating/editing Dimensions and some other Graphic items
Drc: fix comments and messages for some drc tests.
To do: fix issues in active layer selection when creating a track and layer pair selection dialog
* Use FPID instead of wxString in MODULE object.
* Use FPID instead of wxString when loading and saving files.
* Use FPID in COMPONENT object.
* Add wxString helper functions and comparison operators to FPID.
* Add fp_lib token to pcb and netlist file formats.
* Add code to load and save FPIDs to pcb file format.
* Fix segfault when deleting invalid footprint library tables in Pcbnew
in non footprint library table build.
* Fix bug when counting the number of mod files in
EDA_APP::SetFootprintLibTablePath();
Cancel event works better (selection box does not appear after cancelling the selection tool).
Removed blinking selection box effect.
Model is accessed in more appropriate way (getModel() method).
* Remove defined CMAKE_INSTALL_PREFIX for Windows from main CMakeList.txt.
* Move footprint library path detection code from pcbnew.cpp to EDA_APP
object.
* Add CMAKE_INSTALL_PREFIX to config.h.cmake.
* Simplify and fix search path list code.
* Add CMAKE_INSTALL_PREFIX to the list of search paths in case KiCad was
installed using `make install`.
* Add default global footprint library table to CMake install.
* Add method to set footprint library table to PCB_BASE_FRAME object.
* Remove unused function EDA_APP::GetLibraryFile().
* Minor FP_LIB_TABLE object improvements.
Minor code cleaning.
Allows compiling under wxMSW-2.8.12, only for test purposes, because there are serious bugs for Kicad under wxWidgets version < 2.9.3. (compil warning generated for these versions)
When a non existent footprint is used by many components, this footprint was previoulsy searched in libs for each component, which is very time consumming.
Netlist dialog: add option to report only most important messages. Useful for large boards.
class REPORTER: add features to allow a basic message filtering (flags to report all/warning/error messages)
Fix Bug #1214599 ( tools are deselected on Move command )
* Use a regular expression to enforce more stringent bus label testing.
* Add validator to edit label dialog to prevent space character from being
used in labels.
dialogs which allow editing of component properties. The button
is active when the table row cursor is on the DATASHEET field only.
When active, and your datasheet is a URI, then your default
browser will be launced to show that datasheet if it can find it.
This incentivizes use of http:// links for datasheets.
Pcbnew: footprint wizard dialogs: minor fixes, and fixes a not working parameters dialog under Windows, due to an incorrect Printf format.
remove scripts/packagesrc.sh, fully outdated (still refers svn repo) and not commented.
was simply a pointer to an object on the display list. At times this object
would disappear from the display list, in the test case because of a concatonation
of two wires, and if you then tried to clone the non-existent object you'd get a
crash. This was not merely a bug, but a naive design choice. IMO.
Now the item to repeat is cloned, so will never also be on the display list.
must be defined if that is the build type wanted. This only affects a text string
anyways, is not particularly important other than telling user from which code
branch the source came.
2) Change name of "testing" to "product" in that same description within
common/build_version.cpp. "testing" made it sound frightenly unusable.
Save grid origin in .kicad_pcb files only if not 0,0 (to keep compatibility with previous versions of pcbnew, mainly the stable version)
Very minor other fixes (set modify flag when grid origin is moved from the dialog grid)
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
Added separate layers for pad netnames (now these are divided into multilayer/top/bottom pads).
More appropriate layers are selecting a copper layer in the high contrast mode (now it shows the copper layer itself, vias & multilayer pads and netnames).
* Force search when wrap past end of list option changes state.
* Fix SCH_FIELD::Matches() for bug in user defined fields which have an ID
of -1.
* Minor improvements to the find data names to improve source code readability.
sometimes, the modified flag was set for these components just when switching from a sheet to an other sheet.
Pcbnew: fix Bug #1197414 (dragged track segments does not show clearance area)
This keeps it out of the KiCad mode path, making that leaner and less confusing about
what is supported in KiCad mode. Within KiCad mode, treat quoted vs. non-quoted tokens
as the two general categories, with non-quoted having sub-categories. Eliminate
an unimplemented, unused function declaration in DSNLEXER.
Improve the output formatting of THROW_PARSE_ERROR().
* Do not fail to build when wxWidgets is built with either --with-gnomeprint
or --with-gtkprint are not configured. Only display warning.
* Move warning code from include/common.h to common/common.cpp so it only
shows the warning once instead of every source file that includes common.h
When KISYSMOD is not defined , in GetAllFiles, skip hidden directories
Gerbview: fix a collision name for GetLayout method.
Eeschema: fix potential crash when editing a pin electrical type (The user was able to enter a non existing type)
This is limited to round tripping the lines of commented text in the
loading and saving to disk through PCBIO::Format() and PCBIO::Parse().
No editing of the comments is given.
- VBO_CONTAINER::allocate() was returning wrong value in case of error
- framelimiter had wrong formula for computing destined period between frames
- removed _padding field from VBO_VERTEX, as it was not speeding up, but wasting memory
Removed a few unnecessary variables and fields from OPENGL_GAL.
Added function GAL::ClearCache() for freeing memory used by cached items.
Fixed a few memory leaks (tesselator, PAINTER's settings & VIEW_ITEM's groups).
Changed a few functions into inlines.
Remove dead code relative to old BOM generation.
Rename witha more explicit name bom-example?.py , fix some issues and move them from script/bom-in-python/ky to script/bom-in-python
Rename ki.py utility to more explicit ky_generic_netlist_reader.py
* Fixed status bar update bug that caused the selected footprint information
to be overwritten.
* Remove unnecessary SetFocus() calls in list control OnChar() handlers.
and various DIALOG classes called from top frames. See comments in
{eeschema,pcbnew}/invoke_a_dialog.h.
*) Move some dialog classes into *.cpp files from *.h files.
*) void SCH_EDIT_FRAME::OnErc( wxCommandEvent& event ) was opening the modeless
ERC dialog more than once if icon was clicked more than once.
*) Remove BOM stuff.
Therefore one can use a custom page layout and title block.
Eeschema, dialog edit component: minor enhancement (the last selected notebook page is remembered during a session)
Eeschema, dialog netlist: fix a bug when removing a plugin panel, when is is not the last.
dialog netlist:Add a predefined command string for python scripts, when creating a new netlist plugin entry.
* Change filtering from single selection to logically and each filter type.
* Remove clear filtering button and logic.
* Filter buttons now behave as true toggle buttons.
* Improve list control pane focus following when using arrow keys to change
list pane.
* Remove unused parameters from list box constructors.
* Make tab key behave like right arrow key when moving focus to next list
pane.
* Make list pane focus wrap around to next or previous control.
* Simplify component list filtering code.
* Improve status bar updating.
* Tell Bazaar to ignore .downloads-by-cmake instead of downloads-by-cmake.
Shader's parameters are stored in VBO_ITEM. Changed VBO_ITEM data structure. Added UseShader() function for selecting shader for a given VBO_ITEM.
Added one main vertex & fragment shader program to be used for with all kinds of items (type of shader is selected using attributes that are stored in VBO). Currently available shaders are: at-least-1px-width line, filled circle and stroked circle.
Removed unnecessary param (aDepthOffset) from a few functions (OPENGL_GAL::drawSemiCircle(), OPENGL_GAL::drawLineCap()). Removed function OPENGL_GAL::DrawRoundedSegment(). Changed some asserts to debug info or error log.
* Add third list control with library names.
* Add button to toolbar to select filter by library name.
* Add bitmap for filter by library name toolbar button.
* Remove custom UI colors from list controls.
fix potential issue in .kicad_pcb file creation, in some places where a %g or %.16g format was used:
al least under Mingw/gcc4.7.2, the floating number was written using scientific notation, not accepted by the S-expr reader.
* Add footprint library table loading to footprint editor.
* Overload FOOTPRINT_INFO::ReadFootprintFiles() to read footprints from the
footprint library tables.
* Fix a bug in FP_LIB_TABLE::IsEmpty() when the table has a fallback table.
* Add code to FOOTPRINT_EDIT_FRAME to use footprint library tables.
* Add an optional build time version of PCB_EDIT_FRAME::loadFootprints() to
populate netlist footprints from footprint library table.
* Remove adding footprints to board whenever GetModuleLibrary() is called and
move loading locally as required.
* Add missing source file license comments and coding policy fixes.
because under Linux and wxWidgets 2.9, wxStaticBoxSizer are very ugly (text not readable in this dialog)
(Does not happen with wxWidgets 2.8)
Eeschema hotkeys: remove duplicate keys in key editor.
File "rules" has instructional text as comments near top.
2) Convert all text files in repo to LF line ending form.
Any checkout done with "rules" in play will convert the working
tree to native line ending, while keeping repo as LF line ending.
* Add code for loading, modifying, and saving the global and project
footprint library tables.
* Add code to load MODULE objects using the footprint library table to
the footprint viewer.
* Add static methods to FP_LIB_TABLE to support loading footprint library
tables.
* Fix a bug when full file name and path are passed to FOOTPRINT_INFO::
ReadFootprintFiles() which I created in bug fix lp:593989.
* Fix a wxString debug assertion in EDA_APP::InitEDA_Appl() when the KICAD
environment variable is defined as an empty string.
* Add error dialog when libraries cannot be found in system search path
when loading footprint using the select footprint dialog.
* Add footprint library name column to the EDA_LIST_DIALOG when selecting
footprints from the list.
* Allow reading all columns from the selected row in EDA_LIST_DIALOG.
* Remove redundant sort from EDA_LIST_DIALOG constructor
* Add library name member variable and accessors to FOOTPRINT_INFO.
* Make headers translatable for Eeschema select component from list dialog.
* Add some helper methods to FPID for identifying the FPID type and validity.
* Remove a bunch of trailing whitespace and add missing license comments.
(explanation: float is implicitly promoted to double anyway, it's only useful
for storage; also a fp variable forces conversion of other int in the expression
without needing a cast)
Typo fixes in some comments 'floatting' -> 'floating' :D
The plan goes like this:
- eeschema still uses int in decidegrees
- all the other things internally use double in decidegrees (or radians
in temporaries)
- in pcbnew UI the unit is *still* int in decidegrees
The idea is to have better precision everywhere while keeping the user with int i
angles. Hopefully, if a fractional angle doesn't come in from the outside, everything
should *look* like an integer angle (unless I forgot something and it broke)
When the time comes, simply updating the UI for allowing doubles from the user should
be enough to get arbitrary angles in pcbnew.
Adds "kicad_pcb" to the list of file-extensions for PCBnew in its Info.plist
to make Launch Services recognize the file associations.
Change 8 bit string to UTF8 so fancy mew in "um" can be shown.
* All items shapes are converted to polygons.
* Polygons are merged layer by layer (for calculation time reasons,zones are not merged)
* for copper layers, vias and pads holes are substracted from polygons (but, for calculation time reasons, not inside zones areas).
* the look is better, mainly when displaying the copper thickness
* solder and paste layers are now shown in 3D viewer.
* the code was seriously cleaned (but still needs to be enhanced).
* Note this is a work in progress which needs refinements.
* All items shapes are converted to polygons.
* Polygons are merged layer by layer (for calculation time reasons,zones are not merged)
* for copper layers, vias and pads holes are substracted from polygons (but, for calculation time reasons, not inside zones areas).
* the look is better, mainly when displaying the copper thickness
* solder and paste layers are now shown in 3D viewer.
* the code was seriously cleaned (but still needs to be enhanced).
* Note this is a work in progress which needs refinements.
- Removed spurious int casts (these are truncated anyway and will break
doubles)
- Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
ArcTangente and NORMALIZE* functions where possible
- ArcTangente now returns double and handles the 0,0 case like atan2, so
it's no longer necessary to check for it before calling
- Small functions in trigo moved as inline
Interior regions on Edge.Cuts are out as keepouts for specctra DSN file
and downstream routers. Point to point matching during polygon assembly
can have individual thresholds, one for board edge and another for interior polygons.
This is more forgiving for sloppy graphical mousers, or those that work without
grid snap on. Currently the threshold for board edge is at zero, meaning the
board edge has to be precisely defined as a polygon, just as before. But it
is easily tunable for experimentation.
* Fixed a bug in PCB_EDIT_FRAME::loadFootprints when no footprint libraries
are found when attempting to load footprints.
* Add a warning to PCB_EDIT_FRAME::loadFootprints to inform the user when
a footprint library file cannot be found in any of the standard library
search paths.
* Changed FOOTPRINT_INFO::m_padCount to unsigned to prevent signed/unsigned
comparison compiler warnings.
* Put NestedSpace() function in netlist_reader.cpp inside conditional debug
build statement to prevent warning in release builds.
This seems to me like the defacto standard for this menu command.
* Added a default filename for save as. Currently it's set to
"Unnamed file" using _() so its translatable.
* Changed the save dialog in PCBnew to use the path of the "original"
file as a base for the new file.
* Fix both legacy and s-expression netlist readers when footprints are
assigned in the netlist.
* Add some helper functions to NETLIST for detecting when footprints are set
or not set and when they have been changed while loading the .cmp file.
* Rename a few functions to improve their readability.
In most case the assignment to null was not necessary since it was easily provable that the (local) variable wouldn't have referenced after that anyway.
* Tweak the NETLIST_READER code to allow for component footprint names that
are not found in any library to generate a warning instead of an error and
update the board accordingly.
* Don't display undo warning in netlist dialog when dry run option selected.
* Rename netlist_reader_common.cpp to netlist_reader.cpp
* Rename netlist_reader_firstformat.cpp to legacy_netlist_reader.cpp
* Rename netlist_reader_kicad.cpp to kicad_netlist_reader.cpp
* Remove cvpcb/read_write_cmpfile.cpp and move the single function it
contained into cvframe.cpp
* Remove cvpcb/loadcmp.cpp and move the single function it contained into
class_DisplayFootprintsFrame.cpp.
* Remove cvpcb/readschematicnetlist.cpp and move the single function it
contained into cvframe.cpp.
* Remove cvpcb/setvisu.cpp and move the few functions it contained into
the appropriate source file.
* Create separate NETLIST object to hold contents of netlist files.
* Read entire netlist and footprint link files before making applying
changes to board.
* Add BOARD::ReplaceNetlist() function to eliminate the calls between the
NETLIST_READER, PCB_EDIT_FRAME, and BOARD objects.
* Change placement of new components below the center of the current board
or in the center of the page if the BOARD is empty.
* Add dry run option to netlist dialog to print changes to message control
without making changes.
* Add button to netlist dialog to allow saving contents of message control
to a file.
* Eliminate the need to compile netlist_reader_*.cpp in both CvPcb and Pcbnew.
* Add netlist_reader_*.cpp to the pcbcommon library.
* Remove redundant load component link file code from CvPcb.
* Modify CvPcb new to work with the new NETLIST_READER object.
* Add compare() function and < and == operators to FPID object.
* Add REPORTER class to hide an underlying string writing implementation for
use in low level objects. Thank you Dick for the idea.
* Lots of minor coding policy, Doxygen comment, and missing license fixes.
a CSV file for Libre Office or Open Office. It is very easy to use. You can specify it as a plugin for
Eeshema netlist generator.
It searches for all field names, generates the table headings accounting for all fields found in any part.
Then stuffs all the parts rows according to proper fields.
Moved switching canvas routines to pcbnew, as they are used only there right now (otherwise libgal would have to be linked to every Kicad application).
Depending on build options seems that wx uses different types for size() so the Format string was not always correct. Put a fat warning in a comment too.
Pcbnew: load footprint from modview: Because modview allows user to choose the footprint library, the selected library is forced when the footprint is loaded.
I am not sure this is 100% better, but this new behavior has some advantages, mainly in the footprint editor (you can load a footprint outside the selected library)
bit string version of property_tree. The ram resident structure of the ptree is
mostly compatible with one created using the xml_parser from
boost::property_tree, with slight differences in the way atoms are stored. The
result is you can use Format() to convert from xml to s-expression, but not the
other way around. You can write a simple s-expression beautifier in just a few
lines of code.
The main value however is the s-expression parser, i.e. Scan(), which is an
alternative to crafting a custom recursive descent parser for a particular
grammar. The tipping point depends on whether you want to read only a small
portion of a much larger document. If so, then using the ptree will likely be a
"faster to code" route. Documentation on how to navigate a ptree can be found on
the boost website and there are a number of examples in the
pcbnew/eagle_plugin.cpp file in this project. Powerful path navigation support
makes it easy to extract a subset of a ptree.
New methods in VIEW class: SetTopLayer(), EnableTopLayer() for managing the top layer display.
New method in PCB_RENDER_SETTINGS class: LoadDisplayOptions() for applying display settings like high-contrast, outline display of items, etc.
the spurious warning about stuff that couldn't be seen when changing
colours.
NOTE that the 'net name' layer is present and configurable but non used
anywhere!
Pcbnew, layer manager: add option (popup menu) to always keep copper layers not visible but the active layer, even when the active layer is changed.
Usefull for multilayer ( more than 4 layers) PCBs.
In particular the new mechanism for handling extended color palettes is in place,
included renaming the ini keys and saving the color name instead of its index; this means better forward compatibility with palette changes.
Since ini keys are changed, colors will be reset
New classes:
- VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.)
- VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes).
- EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL).
- GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries.
- WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc.
- PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods.
- STROKE_FONT - Implements stroke font drawing using GAL methods.
Most important changes to Kicad original code:
* EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects.
* EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime.
* There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew)
* Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom.
* Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime.
* Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods.
* Removed tools/class_painter.h, as now it is extended and included in source code.
Build changes:
* GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL.
* When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required.
* GAL-related code is compiled into a static library (common/libgal).
* Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad
Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS).
More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
include/vector2d.h: Removed old version
include/math/math_util.h: rescale() for VECTOR2
include/math/vector2d.h: New version of VECTOR2
include/math/box2.h: New version of BOX2
common/drawframe.cpp: Refactorization of code, so it is compatible with new classes
include/plot_common.h, pcbnew/basepcbframe.cpp: Changed header inclusion path
CMakeLists.txt: Added definition to turn on WX_COMPATIBILITY for replacement classes
* Complete encapsulation of the ZONE_CONTAINER class.
* Fixed a bug in the EDA_TEXT::Format() default effects behavior due to
improper conversion to internal units and missing test for default
thickness.
* Improved grammar of some Pcbnew context menu strings.
* Moved some more cleverly hidden BOARD object methods into class_board.cpp.
* Lots of coding policy and documentation fixes.
standard layer name support from BOARD::GetLayerName(). This function evolved
in a contorted direction over time, and was being asked to return one of 3
different kinds of layer names, even though it only took a boolean to control
that choice.
Users are better served by forcing them to get to know the concise new
English Standard layer names. This is because these concise names show up
in the "pretty" footprint/module files as the standard representation of
both feature and copper layers.
Change the name of BOARD::GetDefaultLayerName() to GetStandardLayerName().
Drop boolean argument to both BOARD::GetStandardLayerName() and
BOARD::GetLayerName().
* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
support. This should cover most dependency cases.
* Encapsulate most of the MODULE class.
* Start encapsulating the DIMENSION class.
* Lay some groundwork for EDA_TEXT encapsulation.
* Move cleverly hidden MODULE functions into class_module.cpp.
* Use std::swap to exchange TEXTE_PCB values for undo/redo.
* Remove unused members from MODULE class.
* The usual coding policy and documentation fixes.
* Make Pcbnew net list dialog honor escape key on Linux.
* Make Pcbnew swap layers dialog honor escape key on Linux.
* Layout and UI policy fixes for Pcbnew swap layer and net list dialogs.
* Layout and UI policy fixes for Eeschema plot dialog.
* Rename fpip.h to fpid.h.
* Fix FPID class compiler errors.
* Restore fpid.cpp to Pcbnew static library source list.
All: For new zoom centering option: use Shift+Ctrl key instead of Alt key to select the new zoom centering, because Alt key has a special function under Windows.
2 very minor other changes.
the crosshair after zooming.
This method is only used when the ALT key is held while using the mousewheel or
if it's permanently enabled in the options dialog next to the middle mouse
button panning option.
* Add check for pad type and force drill size to zero if pad is surface
mount in PCB_PARSER.
* Modify the D_PAD SetAttribute method to clear drill size if pad type is
set to surface mount.
* Fixed spacing issue in pad properties dialog.
* Remove wxSHAPED flag from pad drawing panel to prevent assertion in
wxSizer.
* Used sane default pad size and drill size settings to prevent wxRound
assertions.
* Add license to class_board_design_settings.cpp.
* Improve the stable and testing build version option logic.
* Use CMake FindPythonInterp to configure the Python interpreter.
* Use Python interpreter to determine the system Python module install
path if not already defined on the command line.
* Add header symbol checks for asinh(), acosh(), and atanh().
* Add test source to check for isinf() which can be defined as a C++template.
* Replace conditional compile on windows systems for aXXXh() with CMake
configuration tests.
* A few minor MSVC compile fixes.
* Fix incorrect python environment string in fixswigimports.py
* Create a separate document for KiCad CMake build options.
* Create a separate how to compile KiCad on Windows document.
Pcbnew: in netlist dialog: The user now can choose between the netlist and the .cmp file to import footprints names.
Therfore no need to delete the .cmp file when exists to use only the netlist.
This is useful for users who use CvPcb only once to fill footprints fields in schematic, and after edit/modify the footprints fields in schematic outside CvPcb.
Could be a bug inside boost::polygon. This is a workaround, because one never knows if this kind of bug is fixed.
However it fixes this issue for the 2 boards.
Segment Hit Test: enhanced detection near segment ends (noticeable for instance when clicking on short tracks in Pcbnew.
Remove duplicate code about segment hit test.
remove unused file.
Still try to find a better fix for Bug #1100876, however I am thinking the bug is not in Kicad:
looks like a buggy version of wxWidgets is used, which sends sometimes an unwanted wxCommandEvent event,
when an event::Check() is called inside a function called by a wxUpdateUIEvent event.
It could be a race condition when setting the tools state on and off in PCB_EDIT_FRAME::OnSelectAutoPlaceMode( wxCommandEvent& aEvent ) on some Linux/wxWidgets versions
(does not happen on my computer)
Make scripting version compilable on platforms where the python executable is not python2:
Just define it by -DPYTHON_EXECUTABLE=<python executable filename> when running cmake (there was already a partial fix for this)
Make scripting version compilable on platforms where the python executable is not python2 (define it by -DPYTHON_EXECUTABLE=<python executable filename>)
Pcbnew: export vrml:
* move dialog functions to a new file: dialog_export_vrml.cpp (to be consistent with other dialogs).
* fix some coding style issues
* added patch from Cirilo Bernardo.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
Use wxFormBuilder to create EDA_LIST_DIALOG_BASE, like other dialogs.
Minor code cleanup (remove unused functions and coding style fixes) and minor bug fixes.
Until now, 2 tracks were seen as connected only if one end of the first track is *exactly* on one end of the other track.
Now the 2 ends are seen as connected when they are "near" i.e. the distance between the 2 ends is < track width/2
* Use the recent wxFileSystemWatcher to automatically update the tree project when a file is created/deleted/renamed in the project directory
(and if the file type is usually shown by the manager.)
Needs wxWidgets 2.9.4 or more recent.
* Also code cleanup, dead code or useless code removed.
* Create new GEDA PCB plug in.
* Add support for opening GEDA PCB footprints with module editor.
* Make import footprint file dialog remember last selected footprint
type during current session.
* Update module editor file import to use new GEDA PCB plug in.
* Let IO_MGR know about GEDA PCB plug in.
* Create a WHITESPACE_FILTER_READER to simplify parsing GEDA PCB footprint
files.
Because now there are 2 formats, board backup files extensions are .brd-bak or .kicad_pcb-bak instead of the old .000 extension, depending on the initial file format.
Pcbnew: Drc dialog: fix a old very minor bug.
Added: single click on an item in marker list moves the board graphic cursor on the corresponding marker location on the board
Double clicking is not modified.
Library Browser tool, you have to select it in the components listbox
and then press the "Insert component into schematic" button to close the
window and return to the schematic.
The attached patch enables the selection and insertion of a component in
schematic by double clicking on it in the Library Browser component
listbox. As the double clicking should have effect only if the Library
Browser was launched to load a component in schematic, the patch checks
for NULL the m_Semaphore variable, used two distinguish the mode in
which the Library Browser is running (modal, used when inserting a
component in schematic, or non-modal).
* Fix offset errors when scale factor greater is than one.
* Changed behavior of fit in page when not drawing border and
title block to fit board outline in page.
* Fix offset errors when mirroring (still not 100% correct on MSW with
wxWidgets 2.9.4).
* Lots of the usual code cleaning and simplifying.
* remove useless spaces in csv bom file format.
* remove KICAD_GOST conditionnal compilation and merge KICAD_GOST code with the "normal" code.
* Csv file format created by KICAD_GOST code is now available for everybody through the BOM dialog options (as it should).
* fix coding style issues.
their type, by using the more abstract PLUGIN::Footprint*() functions.
This is an intermediate phase only, other changes will be necessary as library table support comes in.
Encapsulate usage of library path searching, since that will go away as library table support comes in.
Add FOOTPRINT_EDIT_FRAME::{get,set}LibPath() and FOOTPRINT_EDIT_FRAME::{get,set}LibNickName() functions
to provide this encapsulation.
some functions used in wxWidgets ( like _strdup and few other) are not defined when this option is set.
but the equivalent option -std=gnu++0x works fine so it is used under mingw instead of -std=c++0x.
(Under Linux/OSX the option -std=c++0x is used)
This required the additional compiler command line option "-std=c++0x".
2) Switch to unique_ptr from auto_ptr which is C++ deprecated.
3) Change to new English layer names per mailing list discussion, see class_board.cpp.
4) When saving to *.kicad_pcb or *.kicad_mod, identify opportunities to use wildcard
layer sets, for pads so far.
5) Switch to two std::string hashtables in pcb_parser.cpp, away from one wxString based one
for layer names and layer sets mapping. One hashtable holds the mask, the other the index.
Layer sets are only in the mask table.
6) Move "LOCALE_IO toggle" into PCB_IO::Format() since it is a public API function and
caller should find it as convenient as possible to use. LOCALE_IO should handle
nesting OK in the case where public Format() is called from one of the Footprint*()
functions.
7) Drop support for "export module to new library". Creating new libraries will have to
be handled in concert with library table entries, and we've talked recently about
creating a better footprint library manager, one that resides in a DLL/DSO. So
this kind of functionality needs to be handled in there in the near future.
8) Change name of exported PCB_IO module/footprint to *.kicad_mod and not *.emp.
can be parsed, since they do not have an overriding layer name map
like a BOARD does.
Avoid doubly looking up hashtable entries in m_layerMap.
Minor code reformatting.
* If this param is set to 0, the previous behavior is used.
* Else the solder mask is plotted as polygon, with shapes near than this min width value are merged.
Pcbnew in nanometer version: fix a serious rounding issue due to the fact dialogs were using 4 digits for mantissa.
* This is not enough for nanometer coordinates ( 8 are needed to display a value in inches),
* so sometimes after closing a dialog, some coordinates were modified, although no new value was entered.
Minor other bug fixed.
Here is a first cut at the 40pin booster pack template. I made 2
versions, BoosterPack40, which has the optional J5 connector and is
2"x1.7" and BoosterPack40_min, which is 2"x1.35" and leaves the
switches accessible.
* Add footprint methods to PCB_IO.
* Add FP_CACHE and FP_CACHE_ITEM for handling new footprint library design.
* Add code to save legacy libraries in new format.
* Change behavior of BOARD_ITEM::GetLayerName() to return the default layer
name when the item does not have a BOARD as a parent.
* Minor changes to the module output formatter when writing to module library
files (no BOARD as parent).
* Add new (and some that I forgot along the way) CMake flags to
EDA_BASE_FRAME::CopyVersionInfoToClipboard().
* Add -Wno-narrowing to GCC flags to stop GCC 4.7 from complaining about
a conversion from int to unsigned in the Boost polygon library.
* Add INPUT_STREAM_READER to richio.cpp to allow using any object derived
from wxInputStream as a LINE_READER (needs to be validated).
SVG export does not use no more wxWidgets wxDC.
In pcbnew SVG files can be created by plot menu (in B&W) or export SVG menu (B&W or Color).
Export SVG menu is more suitable to create a view of a board, and plot menu is better to create a B&W document of silkscreen layers.
(In the future, the 2 menus could be merged, because they are not very different).
Note: pcbnew plot code is cleaned, mainly in dialog files, but still needs more cleanup.
remove duplicate code and clean it.
Simplify HPGL dialog: plot offet removed and replaced by only one option:
plot origin to center of sheet or not (some HPGL plotters have the plot origin to center of the paper area,
and others have this origin at the bottom left corner)
This is surely enough.
clean duplicate code.
Simplify HPGL dialog: plot offet removed and replace by only one option (plot origin to center of sheet or not)
This is surely enought.
Mainly to plot drill maps, but can be used to plot boards, for documentation.
The print svg still exists, but the plot SVG has more options (mirroring, holes in pads),
however print svg allows color print, and full board printing, and plot does not.
and therefore tracks are now dragged when a end point is inside a pad, not necessary on the pad position.
However, drag functions still need more cleanup.
therefore tracks which have a end point inside a pad, but not necessaryexactly to the pad position are seen as connected, and are no more removed.
Side effect: reconnect to pads option is removed, because it is useless.
TODO: use this algorithm in drag functions.
Minor other fixes
Kicad manager: shows now svg files in tree files.
Pcbnew: fix incorrect printing (board out of page) when creating drill map in postscript format ( noticeable mainly for small boards)
* serious code cleanup (remove duplicate code)
* shows (option in 3D preference menu) the copper items (tracks, zones...) in 3D, using 35 microns copper thickness.
However, because there are a lot more3D data to show (roughly 4 times more), this is slower.
connection, no matter if it is originating locally or from the outside
of the host. There is no check in place to discard non-local
connections. The only security against a malicious attack would be
provided by a local firewall, which is not guaranteed to be installed on
every workstation kicad is used on.
I tested this, and a host running eeschema accepts connections on TCP
port 4243 from other hosts on the internet.
A patch to remedy this potentially serious security hole is attached. It
creates the listener on localhost instead. A flag is provided to allow
the creation of sockets on 0.0.0.0 instead, if required. localhost is
the default.
All: press ctrl+shift key when moving the mouse allows the graphic cursor to be moved outside the grid.
(useful to place graphic objects, texts in any position, regardless the current grid)
Clipper is, by far, more easier to use than Kbool, and is currently actively maintained.
It is used only to normalize polygons, i.e. to convert self intersecting polygons to simple polygons,
which is not possible with boost::polygon.
This is *a work in progress*, so some features are missing, and/or could be modified.
Mainly keepout zones are not yet exported to autorouters, and pads are not taken in account.
Some code cleanup in polygon.*
Coordinates were using always 3 digits (1/1000 inch for mantissa). Uses now 4 digits max in inches and 3 digits max in mm
The resolution is therefore 1/10000 inch or 1/1000 mm. Note this is a limitation of Excellon format.
When reading board files, the net 0 was stored twice.
It creates only log messges in debug mode, because the list of nets is rebuild after reading files.
Use now English layers names to build filenames in plot functions (for techical layers), because translated names create sometimes problems in filenames.
(should do not change anything for English users)
Fix compil issue under wxGTK 2.8.12, created by my recent commit.
Minor changes to make translations easier.
Use now English layers names to build filenames in plot functions (for techical layers), because translated names create sometimes problems in filenames.
(should do not change anything for English users)
* Use index when saving layers to handle translated layer names.
* Add LOCALE_IO switcher when loading s-expression format.
* Make SEGVIA default to through hole to improve file size.
* Don't save default orientation of 0 degrees in TEXTE_MODULE and TEXTE_PCB.
* Don't save default zone configuration parameters.
* Save multiple zone corners on a single line.
* Fixed missing ( check in graphic and module arc parsers.
* Consistency improvements for DRAWSEGMENT and EDGE_MODULE objects.
* Minor tweaks to D_PAD formatting.
* Change save order of drawings to match legacy file format object order.
* Set end point of SEGVIA to start point so the round trip back to legacy
format is the same.
* Fixed bug saving and loading oval pad drill parameters.
* Fixed bug saving and loading rectangular pad deltas.
* Fixed missing layer for PCB_TARGET.
* Fixed EDA_TEXT italic bug. Thanks Dick!
* Remove some left over debug logging statements.
* Apply Dick's patch along with a few minor changes to fix some clashes with
changes in my branch. Thanks Dick!
* Added missing DRAWSEGMENT line angle.
* Fix thru hole pad layer mask issue.
Tracks should be loaded in the same order as they were saved, no exceptions.
This is for the version control system user.
But even with this objective now implemented in LEGACY_PLUGIN, the TRACKS
are still going through a food processor after they are loaded, and the poor
version control system user has no relief, even with this patch.
TRACKS are always modified after being loaded, and I think this needs to be fixed still.
* Add s-expression file parser object and keyword files.
* Fix minor issues with s-expression file formatting.
* Fix a minor bug the zone container fill state parsing in the legacy plugin.
* Move EDA_TEXT visibility definition to eda_text.h.
* Add minor BOARD_ITEM object improvements to support s-expression file
parser.
pad and via sizes from those settings when diameter is not given
in the local object. Calculation algorithms are inferred from the
UI help of the Eagle program.
For edge connector type of footprints, some copper pads can be on the
back side even within packages.
Flipping of packages to back was not being done correctly, but I think this
is working now.
There are still remaining issues with text positioning that I am working on.
* Derive the pcbnew copper zone and non-copper zone dialog windows from DIAG_SHIM,
which injects some template code.
* Update UIpolicies.txt to talk about DIALOG_SHIM support.
* Add zone support to eagle_plugin.
* Organize ZONE_CONTAINER class declaration for future privacy and accessors.
fix a compil warning.
CvPcb: fix regressions :
Shows now a void field instead of the dummy footprint name $nonane (whenthere is no footprint selected in netlist).
The active footprint selection changes only if a new component is selected from the component file,
and does not change just when the next component is automatically selected, after a footprint selection.
Speed up delete association and auto associe.
This may have been an undocumented bug from more than a year ago, which manifested itself in *.mod files containing duplicate names.
LEGACY_PLUGIN loads those now quietly, but appends "_v2", "_v3", etc. to each succeeding duplicate sharing the same name.
base on expected text and current window font.
Expand the virtual world to 2.14 meters in the nanometer build of PCBNEW.
This seems to be holding up for now.
Eeschema (also Libedit and Libview) now starts always to the default grid (50 mils)
Gerbview starts with the last selected grid, but the validity is tested.
In Pcbnew the grid value is always displayed, so it should always be good.
Eeschema (also Libedit and Libview) starts always to the default grid (50 mils)
Gerbview starts with the last selected grid, but the validity is tested.
In Pcbnew the grid value is always displayed, so it should always be good.
Delete LEGACY_PLUGIN cache after deleting library of same name.
Remove automatically generted freerouter help header.
Add Normalize() to BOX2.
Clamp some values in the virtual space of drawframe.cpp
Should allow Pcbnew code easier to change and Gerbview code more understandable and easier to maintain.
Code cleaning (remove dead code, add comments).
Minor other enhancements.
Should allow Pcbnew code easier to change and Gerbview code more understandable and easier to maintain.
Code cleaning (remove dead code, add comments).
Minor other enhancements.
to Kicad from other EDA tools.
edif2kicad / EDIF to EEschema schematic import
Tools with EDIF out writer:
o OrCad
o DataXpress
o Viewlogic
o IntuSoft ICAP
o Protel nVisage
o PADS ?
o P-CAD ?
o EDIF viewer (www.cimmetry.com)
o EDIF translator (www.elgris.com/content/edif_overview.html)
pcb123net2kicad / converts a pcb123 netlist to Kicad default format
Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
solution to see that it was not pre-computing constants when used in static initializers.
So we have two use cases, and need two solutions to be optimal, since the compiler
is too stupid to do the right thing.
I think we need something else for compile time computable constants, to be optimal
in both use cases. There is quite a bit of code savings by using a macro for that
situation from my testing. To fully capitalize on this, we need to go back and make
Mm2mils() and what not macros also, or have MACRO versions of them too.
as a starting point
* Make double Distance() take double arguments and remove internal range checking.
* Start on EDA_DRAW_FRAME::AdjustScrollBars() and use "double" for most all calculations
in anticipation of setting INT_MAX INT_MIN limits eventually.
* Move board item object Format() functions into PCB_IO object.
* Change file format to use layer names instead of numbers.
* Change file extension to kicad_pcb.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
*) for footprint access into *.mod files and
*) BOARD save/load
The item_io.cpp and ioascii.cpp have been set off to the side for reference
as *.notused, for awhile.
The CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE are gone,
this is now the mandatory usage of the LEGACY_PLUGIN. This should reduce
code maintenance for awhile until the s-expression plugin comes into
play. But at least for legacy format, there is not two code bodies
to maintain any more.
A new LEGACY_PLUGIN footprint library caching scheme is in place which
needs some testing. It should not be any faster, but might give better
results in a networked environment if there is *.mod files on the server.
* Remove internal units from BASE_SCREEN and it's derivatives.
* Remove internal units from EDA_DRAW_FRAME and it's derivatives.
* Use build time code to replace internal units conversions.
* Fix scaling bug in page layout sample window that I created in my
last commit.
* Move all convert from user to internal units into base_units.cpp.
* Remove internal units parameters from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Remove internal units from all dialog text control helper classes.
* Move all convert from internal to user units functions into separate file.
* Remove internal units parameter from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Compile these conversion routines separately for the appropriate pcb or
schematic internal units.
* Move internal units specific status bar update code into the appropriate
application for updating the status bar.
* Move millimeter user units rounding function to common.cpp.
* Move EDA_TEXT object into separate header and source file.
* Compile EDA_TEXT class separately for BOARD_ITEM and SCH_ITEM units.
* Compile PAGE_INFO class separately for BOARD_ITEM and SCH_ITEM units.
* Minor formatting tweaks to Pcbnew s-expression file.
* Move internal unit formatting functions into BOARD_ITEM and SCH_ITEM.
* Fix bug in PCBNEW dialog_pad_properties.cpp that I introduced several days ago.
The m_Master_Pad stuff is stored in the PCB_EDIT_FRAME's BOARD_DESIGN_SETTINGS,
not in the FOOTPRINT_EDIT_FRAME's BOARD_DESIGN_SETTINGS (i.e. not stored in
the module editor's dummy BOARD). Now we properly initialize the
DIALOG_PAD_PROPERTIES::m_Pad_Master reference to the correct master pad
dope, instead of to the dummy module BOARD's master pad, which is not used.
* Save dialog now supports saving boards to new file format.
* Add CMake option to build s-expression file save.
* Add check to main CMakeList.txt file to make sure nanometers are
enables when the new file format is built.
* Minor tweaks to object format functions for improved output.
* Rename kicad_plugin.h/cpp to legacy_plugin.h/cpp.
This uses the new LEGACY_PLUGIN, so we can force more usage & testing of it
before ioascii.cpp and item_io.cpp are deleted, along with
BOARD_ITEM::Save() and BOARD_ITEM::ReadDescr() associated functions.
* support for 3 terminal regulators
* add a data file management to store parameters for regulators ( name, vref value, Iadj value, type)
Needs some refinements, but it is already very useable.
Commit dialog page setting patch from Alexander Zakamaldin
* Add s-expression Format() function to all objects derived from
BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
(nanometers) to millimeter string for writing to s-expression
file.
* Add temporary dummy conversion functions to prevent link errors
until schematic and board object and action code can be separated
into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
units.
Eeschema: one string with a bad char (\a, not useable in internationalized strings).
Dialog_page_settings: use not translated strings in code, so strings can be freely translated for the UI.
(Initial code was not working with existing translations)
Update 2 icons.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
issue in cast to wxRect fixed (EDA_RECT accepts negative size, but not wxRect, so the wxRectcast is normalized now).
This fixes some bugs.
A minor other bug fix in Pcbnew.
subclass DIALOG_SHIM support.
Tried dialog_drc but it has nesting problems due to use of DRCLISTBOX, which
needs to be put into its own header file to untangle.
This works, but in my version of wxformbuilder there is a bug which does not properly show the
subclass property, even though it is still in play. This happens after saving then loading the *.fbp file.
So it is a nuisance bug, but does not affect functionality.
DLIST iterator code, now we can do:
for module in pcb.m_Modules:
print module.GetReference()
instead of:
module = pcb.m_Modules
while module:
print module.GetReference()
module = module.Next()
or even:
module_list = list(pcb.m_Modules)
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
* make 2 bitmaps more visible.
* fix incorrect screen redraw when rotating a component.
* netlist : the pcbnew advanced format can be now stored (persistant option) in project config.
Pcbnew:
* graphic_item_properties_base.fbp * dialog pad edit: make some strings more easier to translate.
* global pad edition: fix a bug that change pad position instead of pad size (round pas only).
Eeschema:
* fix a bug: new created wires were not alwaes shows until the screen was redrawn.
wxWidgets 2.9 knows wxSVGFILEDC device context.
Unfortunately, arcs are drawn as pies (this is a feature, not a bug).
This is not correct for Kicad.
So Kicad has its own wxSVGFILEDC (named KicadSVGFileDC) that is basically the same as wxSVGFILEDC,
but with arcs drawn as arcs, not pies.
Note also under wxWidgets 2.8 does not know wxSVGFILEDC , so kicad had already its own SVG device context.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
* Pcbnew: in hight contrast mode the 'V' hotkey did not always refresh the screen.
* Eeschema: incorrect print scale when the option 'Show page limits' is disable.
derived classes' implementations of these functions become non virtual and
can be truly _inlined_ for speed! All GetPosition() in derived classes were also
changed to return const wxPoint&, that is, a reference rather than a
full copy of the position wxPoint. There was no need for polymorphism in
{Get,Set}Position() since we never call these functions via generic pointer.
* Remove BOARD::{Get,Set}Position() since they were only there to satisfy
the pure virtuals established in BOARD_ITEM, which are now gone.
* Added const wxPoint& CPolyLine::GetPos(), made CPolyLine::Get{X,Y}() inline.
* Derive CPolyPt from wxPoint so we can return "const wxPoint&" fromt
CPolyLine::GetPos().
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
which is in turn already within BOARD.
* encapsulate class D_PAD with accessors, making data private.
* make D_PAD::GetBoundingRadius() do its longer calculation lazily, based on
m_boundingRadius == -1.
Design rules: increase number of vias and tracks sizes
Pcbnew: netlist reader: change from my recent commits to keep netnames in pads for footprints not in netlist
(allow an user to place some footprints by hand, set pads netnames and do not lost these netnames when loading a netlsit)
Fix other very minor issues.
the match between wxString::Format() or wxString::Printf() format strings
with passed arguments, but does this at runtime, not compile time.
Fix some mismatches. size_t is a 64 bit type on x86_64 whereas int and
unsigned are 32 bit types. On 32 bit machines they are all 32 bits so
this error is probably not triggered.
* Added a dialog to select options: one or 2 files, units (mm or inch), and force INSERT option.
* code cleaning
* Modify corresponding icon in menu to show a footprint, not a schematic component.
bool g_Zone_45_Only, is now in BOARD::m_zoneSettings.m_Zone_45_Only
ZONE_SETTINGS g_Zone_Default_Setting is now in BOARD::m_zoneSettings
* Changed classs ZONE_SETTING to class ZONE_SETTINGS.
* Changed ZONE_SETTINGS::Import() to operator << ( ZONE_CONTAINER )
* Added BOARD::{Get,Set}ZoneSettings().
* Added PCB_BASE_FRAME::{Get,Set}ZoneSettings().
* Save/load BOARD::m_zoneSettings.m_Zone_45_Only to/from BOARD file.
* Removed PCB_EDIT_FRAME::InstallDialogNonCopperZonesEditor() in favor of
::InvokeNonCopperZonesEditor() declared in zones.h
* Added ::InvokeCopperZonesEditor() declared in zones.h
* Removed dialog_copper_zones.h since DIALOG class is now declared in *.cpp.
* Renamed to enum ZONE_EDIT_T in zones.h
* SetVisibleAlls() is not called as it was in two previous cases for several
reasons. BOARD_DESIGN_SETTINGS constructor controls what is visible initially.
and in the near future so will the *.brd file. I believe the user should
have visibility setting rentention accross editing sessions of zones,
fields, etc.
* BOARD_DESIGN_SETTINGS constructor initializes hidden text as not visible.
* Added PCB_EDIT_FRAME::SyncRenderStates() and PCB_LAYER_WIDGET::syncRenderStates()
so the checkboxes can be set after loading a BOARD file containing previous
visibility settings.
-wxSize g_ModuleTextSize; /* Default footprint texts size */
-int g_ModuleSegmentWidth;
-int g_ModuleTextWidth;
and add similarly named variables to BOARD_DESIGN_SETTINGS, which are
in a BOARD.
* Eeschema can generate this netlist format.
* Pcbnew can use (automatic identification) the current format or the new format.
* Cvpcb does not use yet the new format.
* Enhance class PLUGIN's comments to improve their value as instructional.
* Switch #includes from "file.h" to <file.h>, and fiddle with search paths
by using include_directories(BEFORE ...)
* dialog_page_settings did not have symmetrical space on its right border.
And it now remembers it last position and size within a program session.
* base_screen.cpp is now compiled twice, once for {pcbnew,cvpcb} and once
for eeschema, in preparation for "compile time" support of internal units
rather than "runtime" support.
sizes. Tested with postscript output only. Required minor file format changes
to reflect the "portrait" setting. common/dialogs/dialog_page_settings.cpp
uses a checkbox but its name is "Landscape", which is inverted from portrait,
but since it is the more common choice, I used that rather than portrait.
The tooltip for that checkbox makes it clear. No portrait mode is supported
for "User" paper size.
* Remove unnecessary copy constructors from board and module library
objects.
* Add doClone() method to board and library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Replace copy method with clone method where applicable.
* Remove DuplicateStruct() function.
* Remove track object copy function.
* Remove unnecessary copy constructors from schematic and component
library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Add assignment operator to EDA_ITEM, SCH_ITEM, and all schematic
objects where the default assignment operator generated by the
compiler would not be adequate.
This feature is very useful for electronics hobbyists who use DIY PCB technology
(both toner transfer and photoresist methods).
Also width correction may be useful for PCB designers who take care of track width etching.
This patch also fixes some minor PS plotting issues.
It describes paper. The m_Offset field was dropped since it was only used
in HPGL plotting within EESCHEMA. PAGE_INFO instance was moved out of
BASE_SCREEN (which is on its way out) into both SCH_SCREEN and BOARD.
----------- This line and the following will be ignored --------------
modified:
CMakeLists.txt
common/CMakeLists.txt
common/base_screen.cpp
common/basicframe.cpp
common/class_plotter.cpp
common/common.cpp
common/common_plotHPGL_functions.cpp
common/common_plotPS_functions.cpp
common/common_plot_functions.cpp
common/dialogs/dialog_page_settings.cpp
common/dialogs/dialog_page_settings.h
common/dialogs/dialog_page_settings_base.cpp
common/dialogs/dialog_page_settings_base.fbp
common/dialogs/dialog_page_settings_base.h
common/drawframe.cpp
common/drawpanel.cpp
common/pcbcommon.cpp
common/projet_config.cpp
common/worksheet.cpp
cvpcb/class_DisplayFootprintsFrame.cpp
cvpcb/class_footprints_listbox.cpp
cvpcb/cvframe.cpp
eeschema/dialogs/dialog_SVG_print.cpp
eeschema/dialogs/dialog_SVG_print.h
eeschema/dialogs/dialog_build_BOM.cpp
eeschema/dialogs/dialog_plot_schematic_DXF.cpp
eeschema/dialogs/dialog_plot_schematic_HPGL.cpp
eeschema/dialogs/dialog_plot_schematic_PS.cpp
eeschema/dialogs/dialog_print_using_printer.cpp
eeschema/eeschema_config.cpp
eeschema/files-io.cpp
eeschema/libedit_plot_component.cpp
eeschema/libeditframe.cpp
eeschema/libeditframe.h
eeschema/load_one_schematic_file.cpp
eeschema/sch_screen.cpp
eeschema/sch_sheet.h
eeschema/schframe.cpp
eeschema/viewlib_frame.cpp
eeschema/viewlib_frame.h
gerbview/dialogs/dialog_show_page_borders.cpp
gerbview/dialogs/gerbview_dialog_display_options_frame.cpp
gerbview/events_called_functions.cpp
gerbview/gerbview.cpp
gerbview/gerbview.h
gerbview/gerbview_config.cpp
gerbview/gerbview_frame.cpp
gerbview/initpcb.cpp
include/appl_wxstruct.h
include/class_base_screen.h
include/class_colors_design_settings.h
include/class_pcb_screen.h
include/class_sch_screen.h
include/common.h
include/pcbstruct.h
include/plot_common.h
include/wxBasePcbFrame.h
include/wxEeschemaStruct.h
include/wxstruct.h
pcbnew/basepcbframe.cpp
pcbnew/class_board.h
pcbnew/class_pad.cpp
pcbnew/class_pad.h
pcbnew/class_track.h
pcbnew/classpcb.cpp
pcbnew/dialogs/dialog_SVG_print.cpp
pcbnew/dialogs/dialog_gendrill.h
pcbnew/dialogs/dialog_pad_properties.cpp
pcbnew/export_gencad.cpp
pcbnew/gen_drill_report_files.cpp
pcbnew/gen_modules_placefile.cpp
pcbnew/gendrill.cpp
pcbnew/gendrill.h
pcbnew/graphpcb.cpp
pcbnew/initpcb.cpp
pcbnew/io_mgr.h
pcbnew/ioascii.cpp
pcbnew/item_io.cpp
pcbnew/kicad_plugin.cpp
pcbnew/loadcmp.cpp
pcbnew/minimun_spanning_tree.h
pcbnew/moduleframe.cpp
pcbnew/onleftclick.cpp
pcbnew/pcbframe.cpp
pcbnew/pcbnew_config.cpp
pcbnew/pcbplot.h
pcbnew/plotdxf.cpp
pcbnew/plotgerb.cpp
pcbnew/plothpgl.cpp
pcbnew/plotps.cpp
pcbnew/print_board_functions.cpp
pcbnew/printout_controler.cpp
pcbnew/printout_controler.h
pcbnew/solve.cpp
pcbnew/xchgmod.cpp
unknown:
3239.patch
3268.patch
build/
container_test.cpp
debug/
dick
release/
new/build/
new/doxygen.sty
pcbnew/basepcbframe.cpp.orig
pcbnew/plotps.cpp.orig
pending merges:
Dick Hollenbeck 2012-01-05 fix unreleased bug pertaining to "Sheet" line in a *.brd file
Dick Hollenbeck 2012-01-05 [merge] merge in mainline into KICAD_PLUGIN work, which is for the PCBNEW nanometer support
Dick Hollenbeck 2012-01-05 cannot use plugin until done
Dick Hollenbeck 2012-01-05 finish up SCH_SHEET::{Set,Get}PageSettings() switch over
Dick Hollenbeck 2012-01-04 remove page size globals from eeschema
Dick Hollenbeck 2011-12-30 moving objects into BOARD which are saved in a *.brd file, for PLUGIN access
Dick Hollenbeck 2011-12-22 [merge] merge in testing
Dick Hollenbeck 2011-12-22 rename Ki_PageDescr to PAGE_INFO, encapsulate it in accessors, and move it into the BOARD
* Move SCH_ITEM::Place() code into SCH_EDIT_FRAME so schematic item
objects no longer have any knowledge of the schematic frame window
or undo/redo containers.
note: the Module editor save it with default orientation and layer, but the archive function does not, so some footprints can be not editable.
TODO: modify the Archive Function to use the default layer / orientation.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* Add check box and flag to ignore replacing the component reference
designator field.
* Fix a resizing bug when switching between the find and replace modes of
the find/replace dialog.
* Fix replace component reference designator field bug.
* Force rebuild of search list when schematic is modified and the replace
dialog is closed.
* Prevent finding the next item when the find/replace dialog is closed.
* Respect warp mouse pointer setting when closing find/replace dialog.
* Fix duplicate mnemonic control accelerator keys in find/replace dialog.
* A track is seen connected to a pad if the track end is inside the pad shape.
* Pads inside pads are now seen connected, if the center of the pad is *inside* the other pad.
* this is made to be sure a large copper area is shared by the 2 pads, and to keep algorithm fast.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
KICAD_PLUGIN::Load() is solid now, except for missing globals, which
still need to get moved into the class BOARD.
Same for KICAD_PLUGIN::Save(), only missing globals, which once they
are in the BOARD class, will be added.
* changed all the RotatePoint() functions in trigo.{h,cpp} to take a double as the
angle, which is still in tenths of degrees for now.
* EDA_TEXT::m_Orient is now double, still in tenths of degrees (for a short while),
but the double means parsing files and saving them use a different format string.
++pcbnew
* DRAWSEGMENT::GetStart() and GetEnd() do not operate for S_ARC like they used to.
They are now simply accessors for m_Start and m_End. Use DRAWSEGMENT::GetArcStart()
and GetArcEnd() and GetCenter() for arcs. specctra_export.cpp was the only
source file dependent on the old behavior.
* DIMENSION::m_Text is now contained, not dynamically allocated.
* more kicad_plugin work.
* Enable replace toolbar button and menu entry.
* Improve find replace logging granularity.
* Fix find and replace dialog control hiding and disabling.
* Minor improvements to the SCH_FIND_REPLACE_DATA object.
* Move find collector list iterator into the collector object.
* Add visibility override flag to EDA_ITEM to temporarily show items that
are hidden during find and replace.
* added BOARD::GetPad(int), made BOARD::m_NetInfo private, and contained
within the BOARD, not dynamically allocated and owned via pointer.
* added BOARD::GetPadCount()
* changed NETINFO_LIST::GetCount() to GetNetCount()
* added BOARD::GetNetCount()
* more kicad_plugin work.
* Fix compil issue about automatically created pcb_plot_params.h :
pcb_plot_params.* moved from pcbnew to common because item_io.cpp (using this file) is compiled in common.
In common.cpp GetTimeStamp is renamed GetNewTimeStamp (a better name).
Pcbnew: prepare work to calculate connections between pads that inteserct and therefore can be connected without any track (composite pads).
which should eventually go away in favor of kicad_plugin.cpp.
Add CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE, which should not be
used yet, and both default to OFF accordingly.
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), since BOARD::m_PcbFrame gone.
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* Added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* A couple of dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various ways of
destroying the derived classes and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various way of
destroying the derived class and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.\
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
Enhanced algorithms to calculate board connections:
Previously, a track was seen connected to a pad only if the track end is
exactly on the pad position.
Now a track is seen connected to a pad if the track end is inside the pad shape.
Algorithm to calculate pads connections to track is still very fast.
However some other functions (drag pads, track len calculation ...)
still need the track end exactly on the pad position.
Dead code removal.
* Replace Eeschema find code with a collector based implementation.
* Fixed a search bug when all subsequent searches of an item would ignore
the remaining valid child items when an item had more than one child
item that matched the search criteria.
* Add SCH_FIND_COLLECTOR class to find all items that meet the specified
search criteria.
* Add SCH_FIND_COLLECT0R_DATA to keep track of information for all matching
items.
* Use collector to iterate over the list of items that match the search
criteria rather than trying to start at the last matched item.
* Remove unused searching methods from sheet path and sheet path list
objects.
* Add replace and replace all functionality to Eeschema find dialog.
* Push matching methods down to EDA_ITEM class so they can be used by
other derived objects.
* Add method to EDA_ITEM to test if item supports replacing.
* Add flag to find/replace data to support replace feature.
* Disable wild card matching check box when dialog is in replace mode as
wild card replacement is not supported at this time.
* The usual Doxygen comment and coding policy fixes.
the GetPosition() and SetPosition() changes. It also starts towards making m_Orientation
and m_Thickness fields private with accessors, but does not complete this latter goal.
* Fix bug in hierarchical searches using sheet path pointers which are
destroyed on every search. Use human readable path as last sheet found
in test to prevent comparison of deleted pointers.
* Fix a bug in SCH_COMPONENT::Matches() that would prevent searching for
pins if the search all fields flags was not set.
* Fix a bug in SCH_COMPONENT::Matches() to use the sheet path to perform
the comparison to the correct reference designator and unit number.
* Fix wrapping in sheet path and sheet path list MatchNextItem methods.
* Push search methods down to EDA_ITEM object so advanced searching can
be performed on all items derived from EDA_ITEM.
* Add virtual method to EDA_ITEM object to test if item supports replacing
text.
* Replace switch statement magic numbers in Eeschema socket connection code
with Pcbnew for improved readability.
Fix bug 880132 (Justify not correct)
Note: justifications are now always relative to the text, in libedit (as before) and schematic editor:
if rotated, justification is rotated, because in Pcbnew rotation can have any value.
* Move the component library save file creation and write error dialogs
into the appropriate frame object.
* Change the save component library and document definitions take an
OUTPUTFORMATTER object instead of a file name.
* Change the component alias save document definition function to take
an OUTPUTFORMATTER object instead of a file handle.
* Replace C malloc() and free() functions with C++ new and delete
operators or the appropriate STL container.
* Add option to end mouse capture function to skip executing the end
mouse capture callback.
* Lots of coding policy and Doxygen comment goodness.
Added configuartion option KICAD_NANOMETRIC for this.
* With option set to false: *
- it should work and compile as usual
- some values are saved with decimal point (which should be backward/forward compatible as old versions should just drop fractional part)
* With option set to true: *
- lengths in Global Design Rules should be settable 1nm steps.
FROM/TO_LEGACY_LU(_DBL) macros introduced for easy interconnection between old and new units.
* Use version of DateAndTime that returns a wxString and delete the
version that takes a char* as it is no longer required.
* Merge StrNumICmp() and StrLenNumICmp() into StrLenNumCmp() to create a
single function for comparing strings with integers and remove a lot
of duplicate code.
* Remove unused strupper from string.cpp.
* Use wxArrayString for sorting the EDA_LIST_DIALOG contents.
* Modify algorithm to correctly calculate the virtual drawing size and
offset required to place the drawing correctly under all conditions.
* Ignore default wxWidgets scroll keys on Windows in EDA_DRAW_PANEL key
event handler.
Lee algorithm replaced by a Minimun Spanning Tree algo (using Prim's algorithm ).
Tested on a 5350 pads board, it is more than 100 times faster.
Also fix a crash when clicking on tool "delete selected items" (main horizontal toolbar),
and remove this tool (currently, no code in Pcbnew for this tool)
More about code refactoring in connect.cpp: RecalculateAllTracksNetcode() is 50 times faster with a board using 27000 tracks
Use right icon in pcbnew for load board and new board.
* Create command event handler for orienting schematic items and block.
* Remove redundant orient item and block command handler code and IDs.
* Remove redundant cancel current command event table entry.
* Remove unnecessary schematic bitmap object virtual functions.
* Set path when saving schematic sheet files to prevent assertion in
updated path and file write permission test function.
* Restore directory and file name write permission test function to it's
previous behavior to prevent unexpected save results.
* Add an assertion to verify the path is not empty to directory and file
write permission test function.
* Improve documentation for path and file write permission test function.
* Fix Doxygen link warnings.
* Change edit pin per part flag to only have effect when editing
component with multiple parts or alternate body styles.
* Move global edit pin pert part variable into library editor frame
object.
* Note that this only fixes the bug when the component does not have
multiple parts or alternate body styles.
* Create command event handler for draggining all schematic items.
* Remove redundant delete item command handler code.
* Remove unused close current tool command ID from process special
functions event handler.
* Add a rotate event handler to schematic frame object.
* Remove unique rotate item command IDs.
* Use process event instead of post event to eliminate the need to clean
up the command event client object from the heap.
* Unify find next item and next DRC error hot key commands.
* Unify move and rotate hot keys commands.
* Remove external dependency for adding suffix to reference designator
fields.
* Make schematic field get and set position methods transform coordinates
relative to the parent component object that owns them.
* Make base text class get text method virtual so derived classes can
change the base string according to their individual requirements.
* Fix a problem with default place schematic item add in last commit.
* Tweak move item to support moving schematic sheet pin objects.
* Change schematic sheet pin set position to constrain position within
the parent sheet.
* Schematic sheet pin moving now handled by unified move code.
* Remove old schematic sheet pin move code.
* Add custom client data object for passing hot key information to
command event handlers.
* Fix a bug that prevented changes to schematic sheet pin objects from
being undone.
* symbol in sch library have only single footprint filter,
* footprint filter have no wildcards,
* according footprint exists in pcb lib.
This could remove need in long equ files for lots of ICs.
* Fix a set position method bug in schematic item that caused the fields
to drawn in the wrong position.
* Group zoom hot keys to use the same command event in schematic and
library editor frames.
* Add get and set position methods to all schematic items.
* Encapsulate schematic item position members.
* Add swap data method to schematic items that lacked one.
* Remove global swap data function used by undo and redo functions.
* Unify as many schematic move methods as possible.
* Remove unnecessary place schematic item methods.
* All schematic items are now moved in the same event handler.
* Fixed bug in hierarchical sheet get menu item string method.
* Make no connect and junction items movable, fixes lp:804048
* Fixed bug on Windows that prevented the menu short cuts from working
properly.
* Fix duplicate menu short cut keys in KiCad, Pcbnew, and Eeschema.
* Add menu short cuts for all possible menu entries.
* Grammar and spelling fixes in Eeschema, CvPcb, and Pcbnew path and
library dialog tool tips.
* Translate the French file name subrill.cpp to highlight.cpp.
* Lots of coding style policy fixes.
* Factor test for auto save file into base frame class.
* Added auto save feature to Eeschema for saving schematics, addresses
launchpad question 173631.
* Add auto save interval control to Eeschema options dialog.
* Fix problem with subsequent auto saves in last commit.
* Factor auto save common code into base frame class so all frame windows
can take advantage of the shiny new auto save goodness.
* Use a timer instead of depending on mouse and keyboard events to trigger
an auto save.
* Check for auto save file when opening a board and ask user if they
wish to use the auto save file or the last saved board file.
* Protect all base frame public members.
* Add net list object creation functions to schematic sheet and label
objects.
* Remove function to add schematic object net list items as it is no
longer needed.
* Add license statements to all modified files that required one.
* Add net list object creation functions to schematic component object.
* Remove external variables used by the verify bus label and parse bus
label functions.
* Remove redundant net list object include sheet path member assignment.
* Add license statements to all modified files that required one.
* Define function to allow schematic objects to create their own net list
objects.
* Add net list object creation functions to schematic line, junction, and
no connect objects.
* Add license statements to all modified files that required one.
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
* Add KiCad build option states to copy version information to clipboard
function.
* Add a note to the main CMakeList.txt file to let developers know that
new option states should be added to the copy version information to
clipboard function.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Add visible clearance when edit node or track segment,
add parameter "show clearance for new or edited track with via area"
in "Display options" menu.
and text dialog editor did not handle properly negative rotation angles values.
Eeschema: fix bug when rotating (only using the Rotate hotkey) a field.
* Move auto save time global variables into PCB_EDIT_FRAME object.
* Move footprint library name list global variable int PCB_EDIT_FRAME
object.
* Improve library back up and temporary file error message strings and make
them translatable.
* PCBNew string unification.
* Translate French code names and comments.
* Coding style policy and Doxygen comment fixes.
* All header files used to create the PCB common library now compile as
stand alone code. This prevents the need to define them in a specific
order to make source code compile properly. It should also now be
possible to relocate the source code to build the common PCB library
to a separate folder.
d="m 37.753181,0.7945687 c 0.817941,0 1.48312,0.6617169 1.48312,1.4754 V 42.843469 c 0,1.220524 -0.997769,2.2131 -2.22468,2.2131 H 15.071827 c -0.481643,0 -0.943635,-0.17963 -1.35001,-0.499423 -0.04746,-0.01955 -0.09529,-0.03947 -0.09529,-0.03947 C 13.59019,44.490753 9.1274819,40.797458 7.0418444,38.722676 5.0492727,36.741583 1.6247486,32.664315 1.2406205,32.206204 0.9032107,31.880878 0.6770349,31.306578 0.6770349,30.734861 V 2.2699687 c 0,-0.8136831 0.6651793,-1.4754 1.48312,-1.4754 H 37.755035 z"
id="path103-7"
style="opacity:0.1"
inkscape:connector-curvature="0"/>
<path
d="m 37.753181,1.1634187 c 0.61327,0 1.11234,0.4964721 1.11234,1.10655 V 42.843469 c 0,1.016919 -0.83166,1.84425 -1.8539,1.84425 H 15.071827 c -0.440858,0 -0.84612,-0.17336 -1.179822,-0.453317 -0.01557,-0.0077 -0.03337,-0.0052 -0.04783,-0.01549 C 13.814883,44.196779 9.388511,40.535574 7.3039858,38.4619 5.3344025,36.503306 1.9091368,32.428251 1.5253795,31.969771 1.2343172,31.687969 1.0455902,31.21621 1.0455902,30.734492 V 2.2699687 c 0,-0.6100779 0.4990699,-1.10655 1.11234,-1.10655 H 37.75281 z"
id="path105-5"
style="opacity:0.15"
inkscape:connector-curvature="0"/>
<path
d="m 37.753181,1.5322687 c 0.40897,0 0.74156,0.3308585 0.74156,0.7377 V 42.843469 c 0,0.813683 -0.665179,1.4754 -1.48312,1.4754 H 15.071827 c -0.395993,0 -0.768256,-0.153442 -1.048566,-0.432292 0.01298,0.01328 0.02744,0.02508 0.04227,0.03652 -0.02818,-0.02103 -4.4345289,-3.667845 -6.4990319,-5.72197 C 5.6143414,36.259496 2.1938959,32.191081 1.8105094,31.733707 1.5695024,31.496167 1.4174826,31.125104 1.4174826,30.734861 V 2.2699687 c 0,-0.4068415 0.3325896,-0.7377 0.74156,-0.7377 H 37.753923 z"
id="path107-3"
style="opacity:0.2"
inkscape:connector-curvature="0"/>
<path
d="m 37.753181,1.9011187 c 0.204671,0 0.37078,0.1652448 0.37078,0.36885 V 42.843469 c 0,0.610078 -0.49907,1.10655 -1.11234,1.10655 H 15.071827 c -0.296995,0 -0.576563,-0.115081 -0.786425,-0.324219 C 14.266122,43.611783 9.8564354,39.957586 7.8286395,37.940346 5.8008437,35.923105 2.1275263,31.536372 2.0904483,31.492479 1.9013505,31.308423 1.7864087,31.03031 1.7864087,30.734861 V 2.2699687 c 0,-0.2036052 0.1657386,-0.36885 0.37078,-0.36885 H 37.752069 z"
id="path109-8"
style="opacity:0.25"
inkscape:connector-curvature="0"/>
<path
inkscape:connector-curvature="0"
style="fill:#d1d1d1;fill-opacity:1"
id="path111-8"
d="M 37.753181,2.2699687 V 42.843469 c 0,0.40721 -0.332219,0.7377 -0.74156,0.7377 H 15.071827 c -0.196514,0 -0.385241,-0.07783 -0.524283,-0.216146 L 2.3770612,31.262316 C 2.2361648,31.123998 2.158301,30.936253 2.158301,30.740763 V 2.2758703 h 35.59488 z"/>
<path
d="m 2.3770612,31.256415 c -0.092695,-0.09221 6.8130825,2.365804 8.6799598,2.365804 0.61327,0 1.11234,0.496472 1.11234,1.10655 0,1.857159 2.470878,8.728466 2.378183,8.636254 L 2.3755781,31.256415 z"
id="path117-3"
style="opacity:0.1;fill:url(#linearGradient3140)"
inkscape:connector-curvature="0"/>
<path
d="m 2.3770612,31.256415 c -0.1408964,-0.138319 5.1783135,2.734654 8.6799598,2.734654 0.40897,0 0.74156,0.330858 0.74156,0.7377 0,3.483419 2.888005,8.774572 2.748963,8.636254 L 2.3755781,31.256415 z"
id="path119-1"
style="opacity:0.1;fill:url(#linearGradient3137)"
inkscape:connector-curvature="0"/>
<path
d="m 2.3770612,31.256415 c -0.088987,-0.08816 5.0437203,3.103504 8.6799598,3.103504 0.205041,0 0.37078,0.164876 0.37078,0.36885 0,3.617312 3.208359,8.724409 3.119743,8.636254 L 2.3755781,31.256415 z"
d="M 30.651021,28.947073 33.80969,32.154848 46.445432,18.522619 33.80969,4.8903894 30.651021,8.0980565 36.968785,16.116842 H 19.59504 v 4.811337 h 17.373745 l -6.317764,8.018785 z"
id="path129-4"/>
<path
inkscape:connector-curvature="0"
style="fill:url(#linearGradient4075)"
d="m 33.736257,33.765801 c -0.372725,-0.031 -0.722522,-0.195282 -0.987153,-0.463568 l -3.158669,-3.207775 c -0.571372,-0.58016 -0.619146,-1.504752 -0.110958,-2.142611 l 4.269208,-5.412672 H 19.657145 C 18.78489,22.539086 18.07781,21.821094 18.077704,20.935396 V 16.12406 c 8.6e-5,-0.885677 0.707197,-1.60367 1.579441,-1.603779 h 14.09154 L 29.479477,9.1076085 C 28.971491,8.4673575 29.019414,7.542636 29.590232,6.9623882 l 3.158669,-3.207449 c 0.302577,-0.3074399 0.719561,-0.4832098 1.1476,-0.4761225 0.427997,0.00707 0.83036,0.1964123 1.122893,0.5136897 L 47.655136,17.424736 c 0.57658,0.618489 0.57658,1.586713 0,2.205223 L 35.019394,33.262188 c -0.329967,0.357247 -0.802596,0.541832 -1.283275,0.501178 z M 33.872572,32.16137 46.508314,18.530228 33.872572,4.8979985 30.71369,8.1055565 37.031454,16.124342 H 19.657709 v 4.811337 h 17.373745 l -6.317764,8.018785 3.158882,3.207558 z"
d="m 37.753181,0.7945687 c 0.817941,0 1.48312,0.6617169 1.48312,1.4754 V 42.843469 c 0,1.220524 -0.997769,2.2131 -2.22468,2.2131 H 15.071827 c -0.481643,0 -0.943635,-0.17963 -1.35001,-0.499423 -0.04746,-0.01955 -0.09529,-0.03947 -0.09529,-0.03947 C 13.59019,44.490753 9.1274819,40.797458 7.0418444,38.722676 5.0492727,36.741583 1.6247486,32.664315 1.2406205,32.206204 0.9032107,31.880878 0.6770349,31.306578 0.6770349,30.734861 V 2.2699687 c 0,-0.8136831 0.6651793,-1.4754 1.48312,-1.4754 H 37.755035 z"
id="path103-7"
style="opacity:0.1"
inkscape:connector-curvature="0"/>
<path
d="m 37.753181,1.1634187 c 0.61327,0 1.11234,0.4964721 1.11234,1.10655 V 42.843469 c 0,1.016919 -0.83166,1.84425 -1.8539,1.84425 H 15.071827 c -0.440858,0 -0.84612,-0.17336 -1.179822,-0.453317 -0.01557,-0.0077 -0.03337,-0.0052 -0.04783,-0.01549 C 13.814883,44.196779 9.388511,40.535574 7.3039858,38.4619 5.3344025,36.503306 1.9091368,32.428251 1.5253795,31.969771 1.2343172,31.687969 1.0455902,31.21621 1.0455902,30.734492 V 2.2699687 c 0,-0.6100779 0.4990699,-1.10655 1.11234,-1.10655 H 37.75281 z"
id="path105-5"
style="opacity:0.15"
inkscape:connector-curvature="0"/>
<path
d="m 37.753181,1.5322687 c 0.40897,0 0.74156,0.3308585 0.74156,0.7377 V 42.843469 c 0,0.813683 -0.665179,1.4754 -1.48312,1.4754 H 15.071827 c -0.395993,0 -0.768256,-0.153442 -1.048566,-0.432292 0.01298,0.01328 0.02744,0.02508 0.04227,0.03652 -0.02818,-0.02103 -4.4345289,-3.667845 -6.4990319,-5.72197 C 5.6143414,36.259496 2.1938959,32.191081 1.8105094,31.733707 1.5695024,31.496167 1.4174826,31.125104 1.4174826,30.734861 V 2.2699687 c 0,-0.4068415 0.3325896,-0.7377 0.74156,-0.7377 H 37.753923 z"
id="path107-3"
style="opacity:0.2"
inkscape:connector-curvature="0"/>
<path
d="m 37.753181,1.9011187 c 0.204671,0 0.37078,0.1652448 0.37078,0.36885 V 42.843469 c 0,0.610078 -0.49907,1.10655 -1.11234,1.10655 H 15.071827 c -0.296995,0 -0.576563,-0.115081 -0.786425,-0.324219 C 14.266122,43.611783 9.8564354,39.957586 7.8286395,37.940346 5.8008437,35.923105 2.1275263,31.536372 2.0904483,31.492479 1.9013505,31.308423 1.7864087,31.03031 1.7864087,30.734861 V 2.2699687 c 0,-0.2036052 0.1657386,-0.36885 0.37078,-0.36885 H 37.752069 z"
id="path109-8"
style="opacity:0.25"
inkscape:connector-curvature="0"/>
<path
inkscape:connector-curvature="0"
style="fill:#d1d1d1;fill-opacity:1"
id="path111-8"
d="M 37.753181,2.2699687 V 42.843469 c 0,0.40721 -0.332219,0.7377 -0.74156,0.7377 H 15.071827 c -0.196514,0 -0.385241,-0.07783 -0.524283,-0.216146 L 2.3770612,31.262316 C 2.2361648,31.123998 2.158301,30.936253 2.158301,30.740763 V 2.2758703 h 35.59488 z"/>
<path
d="m 2.3770612,31.256415 c -0.092695,-0.09221 6.8130825,2.365804 8.6799598,2.365804 0.61327,0 1.11234,0.496472 1.11234,1.10655 0,1.857159 2.470878,8.728466 2.378183,8.636254 L 2.3755781,31.256415 z"
id="path117-3"
style="opacity:0.1;fill:url(#linearGradient3140)"
inkscape:connector-curvature="0"/>
<path
d="m 2.3770612,31.256415 c -0.1408964,-0.138319 5.1783135,2.734654 8.6799598,2.734654 0.40897,0 0.74156,0.330858 0.74156,0.7377 0,3.483419 2.888005,8.774572 2.748963,8.636254 L 2.3755781,31.256415 z"
id="path119-1"
style="opacity:0.1;fill:url(#linearGradient3137)"
inkscape:connector-curvature="0"/>
<path
d="m 2.3770612,31.256415 c -0.088987,-0.08816 5.0437203,3.103504 8.6799598,3.103504 0.205041,0 0.37078,0.164876 0.37078,0.36885 0,3.617312 3.208359,8.724409 3.119743,8.636254 L 2.3755781,31.256415 z"
d="m 23.175132,2.4732404 c -0.42822,0.027802 -0.844433,0.090733 -1.265043,0.1364098 h -0.02875 l -1.00633,5.2108977 c -1.64014,0.3544384 -3.183215,0.9559595 -4.57145,1.773284 L 11.789885,6.5115377 C 10.569004,7.4104019 9.459447,8.4589024 8.4832941,9.594705 l 3.1338089,4.337788 c -0.951496,1.379812 -1.667095,2.955355 -2.070069,4.610607 -6.9e-5,0.0079 -5.7e-5,0.02592 0,0.02729 l -5.4626842,0.818459 c -0.09987,0.774048 -0.1437548,1.573972 -0.1437548,2.373574 0,0.654156 0.019036,1.299581 0.086253,1.937062 l 5.462684,0.927587 c 0.388511,1.800085 1.126578,3.481178 2.156368,4.965317 l -3.2488125,4.228747 c 0.9304275,1.09608 2.0046555,2.094032 3.1626065,2.973689 l 4.600155,-3.001015 c 1.607662,0.973159 3.402367,1.655601 5.34768,1.991539 l 0.86253,5.156247 c 0.612905,0.05294 1.241397,0.05456 1.868766,0.05456 0.885695,0 1.731683,-0.03185 2.587587,-0.13641 l 1.035036,-5.265374 c 1.847054,-0.436162 3.58214,-1.192811 5.088875,-2.209795 l 4.427649,3.055579 c 1.148199,-0.926976 2.19823,-1.992499 3.105105,-3.137469 L 37.262969,28.88301 c 0.872051,-1.429138 1.476281,-3.005904 1.78256,-4.692497 l 5.433703,-0.818023 c 0.04764,-0.538087 0.0575,-1.059936 0.0575,-1.609678 0,-0.955262 -0.11701,-1.891928 -0.258759,-2.810086 L 38.757788,17.997812 C 38.325198,16.48207 37.615385,15.067861 36.716423,13.79639 L 39.965236,9.5677307 C 38.958723,8.4004969 37.810525,7.3205678 36.544562,6.4042432 L 31.858108,9.4598226 C 30.511183,8.7039251 29.061674,8.1239232 27.487961,7.7956668 L 26.625892,2.6122692 c -0.785706,-0.087651 -1.576933,-0.1364534 -2.386561,-0.1364534 -0.218848,0 -0.444081,-0.00654 -0.661272,0 -0.105877,0.00318 -0.21066,-0.00585 -0.31626,0 -0.0286,0.00158 -0.0577,-0.00185 -0.08625,0 z m 0.747525,13.2585956 c 0.105039,-0.0051 0.209905,0 0.316261,0 3.403286,0 6.181504,2.636179 6.181504,5.865665 0,3.229397 -2.778126,5.838339 -6.181504,5.838339 -3.403288,0 -6.152708,-2.608942 -6.152708,-5.838339 10e-7,-3.128477 2.580319,-5.70887 5.836492,-5.865665 z"
d="m 22.53847,3.5046294 -0.807961,5.0451983 c -1.537373,0.3322198 -4.365272,1.348296 -5.666472,2.1144613 L 11.765652,7.6198836 C 10.62187,8.4624904 10.543483,8.5196208 9.62888,9.5840101 l 3.107957,4.3738439 c -0.891896,1.293383 -1.963163,3.598163 -2.347828,5.245208 0,0 -5.4460311,0.871136 -5.4460311,0.871136 -0.093614,0.725543 -0.048623,2.278415 0.01438,2.875911 l 5.2020391,0.889261 c 0.364158,1.687292 1.726898,4.403177 2.692195,5.794252 L 9.56193,33.757781 c 0.872133,1.027373 1.046719,1.121398 2.132079,1.945967 l 4.398852,-3.058023 c 1.506918,0.912221 4.498031,2.021833 6.32144,2.336732 l 0.721939,4.981729 c 0.574495,0.04962 2.161614,0.188818 2.963789,0.09081 l 0.809627,-5.186627 c 1.731222,-0.408828 4.722703,-1.574061 6.135043,-2.527314 l 4.39416,3.012627 c 1.076252,-0.868875 1.085913,-0.999786 1.935929,-2.072992 l -3.256174,-4.391916 c 0.817402,-1.339566 1.874288,-3.959333 2.161338,-5.540202 l 5.331212,-0.839377 c 0.04692,-0.50548 0.04876,-1.911919 -0.08373,-2.772719 L 38.095762,18.847218 C 37.690277,17.42646 36.298758,14.866234 35.456193,13.67447 L 38.908517,9.5503118 C 37.964565,8.4549294 37.613666,8.304595 36.427378,7.445541 l -4.547069,3.089802 C 30.618946,9.8264484 28.100821,8.746519 26.626011,8.4383423 L 25.822824,3.5020976 c -0.735858,-0.082138 -2.858904,-0.045664 -3.27945,0 z"
id="path219"
inkscape:connector-curvature="0"/>
</g>
<path
inkscape:connector-curvature="0"
style="fill:url(#linearGradient4075)"
d="m 33.736257,33.765801 c -0.372725,-0.031 -0.722522,-0.195282 -0.987153,-0.463568 l -3.158669,-3.207775 c -0.571372,-0.58016 -0.619146,-1.504752 -0.110958,-2.142611 l 4.269208,-5.412672 H 19.657145 C 18.78489,22.539086 18.07781,21.821094 18.077704,20.935396 V 16.12406 c 8.6e-5,-0.885677 0.707197,-1.60367 1.579441,-1.603779 h 14.09154 L 29.479477,9.1076085 C 28.971491,8.4673575 29.019414,7.542636 29.590232,6.9623882 l 3.158669,-3.207449 c 0.302577,-0.3074399 0.719561,-0.4832098 1.1476,-0.4761225 0.427997,0.00707 0.83036,0.1964123 1.122893,0.5136897 L 47.655136,17.424736 c 0.57658,0.618489 0.57658,1.586713 0,2.205223 L 35.019394,33.262188 c -0.329967,0.357247 -0.802596,0.541832 -1.283275,0.501178 z M 33.872572,32.16137 46.508314,18.530228 33.872572,4.8979985 30.71369,8.1055565 37.031454,16.124342 H 19.657709 v 4.811337 h 17.373745 l -6.317764,8.018785 3.158882,3.207558 z"
d="M 30.651021,28.947073 33.80969,32.154848 46.445432,18.522619 33.80969,4.8903894 30.651021,8.0980565 36.968785,16.116842 H 19.59504 v 4.811337 h 17.373745 l -6.317764,8.018785 z"
// scaffolding until a better one is written, hopefully below.
DBG(printf("m_error_count:%d\n",m_error_count);)
wxStringmsg=_("Errors were encountered loading footprints");
msg+=wxT('\n');
for(unsignedi=0;i<m_errors.size();++i)
{
msg+=m_errors[i].errorText;
msg+=wxT('\n');
}
DisplayError(aWindow,msg);
#else // real evolving deal:
// @todo: go to a more HTML !<table>! ? centric output, possibly with
// recommendations for remedy of errors. Add numeric error codes
// to PARSE_ERROR, and switch on them for remedies, etc. Full
// access is provided to everything in every exception!
HTML_MESSAGE_BOXdlg(aWindow,_("Load Error"));
dlg.MessageSet(_("Errors were encountered loading footprints"));
wxStringmsg=myhtmlwizardry.
dlg.AddHTML_Text(msg);
dlg.ShowModal();
#endif
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Dick Hollenbeck
