Implement AUtobind and low power modes

This is useful if OpenTX firmware is older than the multi module firmware and the protocol in question is not yet in the protocol list of the OpenTX firmware.

.gitignore

@@ -1,3 +1,4 @@
+/.idea/
 /.*project
 /.settings
 /.autotools
@@ -6,3 +7,6 @@ radio/src/bootloader/bootloader_ramBoot*
 *.lbm
 *.o
 /doc/
+*.stamp
+radio/src/lua/lua_fields_*.txt
+radio/src/lua/lua_exports_*.txt

.travis.yml

@@ -1,14 +1,20 @@
 language: cpp
 
 before_install:
-    - sudo apt-get remove cmake cmake-data --yes
-    - sudo add-apt-repository ppa:george-edison55/precise-backports --yes
-    - sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded --yes
-    - sudo apt-get update    
+  - sudo apt-get remove cmake cmake-data --yes
+  - sudo add-apt-repository ppa:george-edison55/precise-backports --yes
+  - sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded --yes
+  - sudo add-apt-repository ppa:ubuntu-toolchain-r/test --yes
+  - sudo add-apt-repository ppa:beineri/opt-qt551 --yes
+  - sudo add-apt-repository 'deb http://llvm.org/apt/precise/ llvm-toolchain-precise main' --yes
+  - wget -O - http://llvm.org/apt/llvm-snapshot.gpg.key | sudo apt-key add -
+  - sudo apt-get update -qq
+  - rsync -av firmware.diydrones.com::Tools/Travis/*.deb ExtraPackages
 
 install:
-  - sudo apt-get install -y lcov cmake cmake-data bc curl gcc-arm-none-eabi gcc-avr avr-libc avrdude libqtcore4 libqt4-dev qt4-qmake g++ libxerces-c-dev xsdcxx libsdl1.2-dev libusb-1.0-0 libphonon-dev phonon libqtwebkit-dev python-qt4 python-qt4-dev libfox-1.6-dev libgtest-dev
+  - sudo apt-get install -y xvfb lcov cmake cmake-data bc curl gcc-arm-none-eabi qt-latest g++-5 libxerces-c-dev xsdcxx libsdl1.2-dev libusb-1.0-0 libfox-1.6-dev libgtest-dev python-clang-3.8 libclang-3.8-dev python-qt4
+  - sudo dpkg -i ExtraPackages/*.deb || echo "FAILED INSTALL OF EXTRA DEBS"
+  - export CXX="g++-5" CC="gcc-5"
 
 script:
-  - radio/util/commit-tests.sh
-  - mkdir build && cd build && cmake -DCMAKE_BUILD_TYPE=Debug ../companion/src && cmake --build .
+  - ./radio/util/commit-tests.sh .

CMakeLists.txt

@@ -0,0 +1,40 @@
+project(OpenTX)
+
+set(VERSION_MAJOR "2")
+set(VERSION_MINOR "2")
+set(VERSION_REVISION "0")
+set(VERSION_SUFFIX $ENV{OPENTX_VERSION_SUFFIX})
+set(VERSION_FAMILY ${VERSION_MAJOR}.${VERSION_MINOR})
+set(VERSION ${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_REVISION}${VERSION_SUFFIX})
+message(STATUS "OpenTX ${VERSION}")
+
+cmake_minimum_required(VERSION 2.8)
+cmake_policy(SET CMP0020 NEW)
+cmake_policy(SET CMP0023 OLD)
+
+set(CMAKE_CXX_STANDARD 11)
+
+set(RADIO_DIRECTORY ${PROJECT_SOURCE_DIR}/radio)
+set(RADIO_SRC_DIRECTORY ${RADIO_DIRECTORY}/src)
+set(COMPANION_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/companion/src)
+
+set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR})
+set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR})
+set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${PROJECT_SOURCE_DIR}/cmake)
+
+find_package(Qt5Widgets)
+find_package(Qt5Xml)
+find_package(Qt5LinguistTools)
+find_package(Qt5PrintSupport)
+find_package(Qt5Multimedia)
+
+include(Macros)
+today(DATE)
+now(TIME)
+git_id(GIT_STR)
+
+add_subdirectory(${RADIO_SRC_DIRECTORY})
+
+if(Qt5Widgets_FOUND)
+  add_subdirectory(${COMPANION_SRC_DIRECTORY})
+endif()

README.md

@@ -1,9 +1,9 @@
-##OpenTX 2.1 Branch
+##OpenTX 2.2 Branch
 
-[![Build Status](https://travis-ci.org/opentx/opentx.svg?branch=master)](https://travis-ci.org/opentx/opentx)
+[![Build Status](https://travis-ci.org/opentx/opentx.svg?branch=next)](https://travis-ci.org/opentx/opentx)
 [![Join the chat at https://gitter.im/opentx/opentx](https://img.shields.io/badge/%E2%8A%AA%20GITTER%20-JOIN%20CHAT%20%E2%86%92-brightgreen.svg?style=flat)](https://gitter.im/opentx/opentx?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
 [![Donate using Paypal](https://img.shields.io/badge/paypal-donate-yellow.svg)](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=DJ9MASSKVW8WN)
 
-The ongoing development on 2.1.x is done in this branch.
+The ongoing development on 2.2.x is done in this branch.
 
 Refer to the opentx.wiki for information about setting up the tool chains for building OpenTX and OpenTX Companion as well as other development related issues.

cmake/Bitmaps.cmake

@@ -0,0 +1,22 @@
+macro(add_bitmaps_target targetname filter width format)
+  file(GLOB bitmaps ${filter})
+  foreach(bitmap ${bitmaps})
+    get_filename_component(target ${bitmap} NAME_WE)
+    set(target ${target}.lbm)
+    add_custom_command(
+      OUTPUT ${target}
+      COMMAND python ${RADIO_DIRECTORY}/util/img2lbm.py ${bitmap} ${target} ${width} ${format} ${ARGN}
+      DEPENDS ${bitmap}
+    )
+    list(APPEND bitmaps_files ${target})
+  endforeach()
+  add_custom_target(${targetname} DEPENDS ${bitmaps_files})
+endmacro(add_bitmaps_target)
+
+macro(add_truetype_font_target radio name font size bold)
+  set(target ${RADIO_SRC_DIRECTORY}/fonts/${radio}/font_${name})
+  add_custom_target(ttf_${radio}_${name}
+    COMMAND ${RADIO_DIRECTORY}/util/font2png.py ${font} ${size} ${bold} ${target}
+    WORKING_DIRECTORY ${RADIO_SRC_DIRECTORY}
+  )
+endmacro(add_truetype_font_target)

cmake/FindSdl.cmake

@@ -4,25 +4,25 @@
 #  SDL_FOUND, if false, do not try to link to SDL
 #  SDL_INCLUDE_DIR, where to find SDL.h
 #
-# Don't forget to include SDLmain.h and SDLmain.m your project for the 
+# Don't forget to include SDLmain.h and SDLmain.m your project for the
 # OS X framework based version. (Other versions link to -lSDLmain which
-# this module will try to find on your behalf.) Also for OS X, this 
+# this module will try to find on your behalf.) Also for OS X, this
 # module will automatically add the -framework Cocoa on your behalf.
 # $SDLDIR is an environment variable that would
 # correspond to the ./configure --prefix=$SDLDIR
 # used in building SDL.
 # l.e.galup  9-20-02
 #
-# Modified by Eric Wing. 
-# Added new modifications to recognize OS X frameworks and 
-# additional Unix paths (FreeBSD, etc). 
+# Modified by Eric Wing.
+# Added new modifications to recognize OS X frameworks and
+# additional Unix paths (FreeBSD, etc).
 # Also corrected the header search path to follow "proper" SDL guidelines.
 # Added a search for SDLmain which is needed by some platforms.
 # Added a search for threads which is needed by some platforms.
 # Added needed compile switches for MinGW.
 #
 # On OSX, this will prefer the Framework version (if found) over others.
-# People will have to manually change the cache values of 
+# People will have to manually change the cache values of
 # SDL_LIBRARY to override this selection.
 #
 # Note that the header path has changed from SDL/SDL.h to just SDL.h
@@ -46,14 +46,14 @@ FIND_PATH(SDL_INCLUDE_DIR SDL.h
   /opt/local/include/SDL # DarwinPorts
   /opt/local/include
   /opt/csw/include/SDL # Blastwave
-  /opt/csw/include 
+  /opt/csw/include
   /opt/include/SDL
   /opt/include
   C:/Programs/SDL/include
   )
-# I'm not sure if I should do a special casing for Apple. It is 
+# I'm not sure if I should do a special casing for Apple. It is
 # unlikely that other Unix systems will find the framework path.
-# But if they do ([Next|Open|GNU]Step?), 
+# But if they do ([Next|Open|GNU]Step?),
 # do they want the -framework option also?
 IF(${SDL_INCLUDE_DIR} MATCHES ".framework")
   # The Cocoa framework must be linked into SDL because SDL is Cocoa based.
@@ -83,7 +83,7 @@ IF(${SDL_INCLUDE_DIR} MATCHES ".framework")
 ELSE(${SDL_INCLUDE_DIR} MATCHES ".framework")
   # SDL-1.1 is the name used by FreeBSD ports...
   # don't confuse it for the version number.
-  FIND_LIBRARY(SDL_LIBRARY_TEMP 
+  FIND_LIBRARY(SDL_LIBRARY_TEMP
     NAMES SDL SDL-1.1
     PATHS
     $ENV{SDLDIR}/lib
@@ -93,13 +93,13 @@ ELSE(${SDL_INCLUDE_DIR} MATCHES ".framework")
     /opt/local/lib
     /opt/csw/lib
     /opt/lib
-    C:/Programs/SDL/lib
+    C:/Programs/SDL/lib/x86
     )
-  # Non-OS X framework versions expect you to also dynamically link to 
-  # SDLmain. This is mainly for Windows and OS X. Other platforms 
+  # Non-OS X framework versions expect you to also dynamically link to
+  # SDLmain. This is mainly for Windows and OS X. Other platforms
   # seem to provide SDLmain for compatibility even though they don't
   # necessarily need it.
-  FIND_LIBRARY(SDLMAIN_LIBRARY 
+  FIND_LIBRARY(SDLMAIN_LIBRARY
     NAMES SDLmain SDLmain-1.1
     PATHS
     $ENV{SDLDIR}/lib
@@ -109,13 +109,12 @@ ELSE(${SDL_INCLUDE_DIR} MATCHES ".framework")
     /opt/local/lib
     /opt/csw/lib
     /opt/lib
-    C:/Programs/SDL/lib
     )
 ENDIF(${SDL_INCLUDE_DIR} MATCHES ".framework")
 
 # SDL may require threads on your system.
-# The Apple build may not need an explicit flag because one of the 
-# frameworks may already provide it. 
+# The Apple build may not need an explicit flag because one of the
+# frameworks may already provide it.
 # But for non-OSX systems, I will use the CMake Threads package.
 IF(NOT APPLE)
   FIND_PACKAGE(Threads)
@@ -136,14 +135,14 @@ IF(SDL_LIBRARY_TEMP)
   ENDIF(SDLMAIN_LIBRARY)
 
   # For OS X, SDL uses Cocoa as a backend so it must link to Cocoa.
-  # CMake doesn't display the -framework Cocoa string in the UI even 
-  # though it actually is there. I think it has something to do 
+  # CMake doesn't display the -framework Cocoa string in the UI even
+  # though it actually is there. I think it has something to do
   # with the CACHE STRING. Maybe somebody else knows how to fix this.
   # The problem is mainly cosmetic, and not a functional issue.
   IF(APPLE)
     SET(SDL_LIBRARY_TEMP ${SDL_LIBRARY_TEMP} "-framework Cocoa")
   ENDIF(APPLE)
-  
+
   # For threads, as mentioned Apple doesn't need this.
   # In fact, there seems to be a problem if Find the threads package
   # and try using this line, so I'm just skipping it entirely for OS X.
@@ -162,4 +161,4 @@ IF(SDL_LIBRARY_TEMP)
   SET(SDL_FOUND "YES")
 ENDIF(SDL_LIBRARY_TEMP)
 
-MARK_AS_ADVANCED(SDL_LIBRARY_TEMP)
+MARK_AS_ADVANCED(SDL_LIBRARY_TEMP)

cmake/Macros.cmake

@@ -0,0 +1,39 @@
+macro(today RESULT)
+  if(WIN32)
+    execute_process(COMMAND "cmd" " /C date /T" OUTPUT_VARIABLE ${RESULT})
+    string(REGEX REPLACE "(..)/(..)/(....).*" "\\1.\\2.\\3" ${RESULT} ${${RESULT}})
+    string(SUBSTRING ${${RESULT}} 0 10 ${RESULT})
+  elseif(UNIX)
+    execute_process(COMMAND "date" "+%Y-%m-%d" OUTPUT_VARIABLE ${RESULT})
+    string(REGEX REPLACE "(....)-(..)-(..).*" "\\1-\\2-\\3" ${RESULT} ${${RESULT}})
+  else(WIN32)
+    message(SEND_ERROR "date not implemented")
+    set(${RESULT} 00.00.0000)
+  endif(WIN32)
+endmacro(today)
+
+macro(now RESULT)
+  if(WIN32)
+    execute_process(COMMAND "cmd" " /C time /T" OUTPUT_VARIABLE ${RESULT})
+    string(REGEX REPLACE "(..):(..).*" "\\1:\\2:00" ${RESULT} ${${RESULT}})
+  elseif(UNIX)
+    execute_process(COMMAND "date" "+%H:%M:%S" OUTPUT_VARIABLE ${RESULT})
+    string(REGEX REPLACE "(..):(..):(..).*" "\\1:\\2:\\3" ${RESULT} ${${RESULT}})
+  else(WIN32)
+    message(SEND_ERROR "time not implemented")
+    set(${RESULT} 00:00:00)
+  endif(WIN32)
+endmacro(now)
+
+macro(git_id RESULT)
+  if(WIN32)
+    execute_process(COMMAND "cmd" " /C git --git-dir=${PROJECT_SOURCE_DIR}/.git rev-parse HEAD" OUTPUT_VARIABLE ${RESULT})
+    string(REGEX REPLACE "(.*)\n" "\\1" ${RESULT} ${${RESULT}})
+  elseif(UNIX)
+    execute_process(COMMAND "git" "--git-dir=${PROJECT_SOURCE_DIR}/.git" "rev-parse" "HEAD" OUTPUT_VARIABLE ${RESULT})
+    string(REGEX REPLACE "(.*)\n" "\\1" ${RESULT} ${${RESULT}})
+  else(WIN32)
+    message(SEND_ERROR "Git ID implemented")
+    set(${RESULT} 0)
+  endif(WIN32)
+endmacro(git_id)

companion/src/CMakeLists.txt

@@ -1,130 +1,81 @@
-PROJECT( companion )
+if(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
+  set(C9X_NAME_SUFFIX ${VERSION_MAJOR}${VERSION_MINOR})
+  set(COMPANION_NAME "companion${C9X_NAME_SUFFIX}")
+  set(SIMULATOR_NAME "simulator${C9X_NAME_SUFFIX}")
+  set(SIMULATOR_LIB_PATH ${CMAKE_INSTALL_PREFIX}/lib/companion${C9X_NAME_SUFFIX})
+else(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
+  set(COMPANION_NAME "companion")
+  set(SIMULATOR_NAME "simulator")
+endif(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
 
-SET(C9X_VERSION_MAJOR "2")
-SET(C9X_VERSION_MINOR "1")
-SET(C9X_VERSION_REVISION "6")
-SET(C9X_VERSION_SUFFIX $ENV{OPENTX_VERSION_SUFFIX})
+option(ALLOW_NIGHTLY_BUILDS "Allow nightly builds download / update") # Disabled by default
+if(ALLOW_NIGHTLY_BUILDS)
+  add_definitions(-DALLOW_NIGHTLY_BUILDS)
+endif(ALLOW_NIGHTLY_BUILDS)
 
-SET(C9X_VERSION ${C9X_VERSION_MAJOR}.${C9X_VERSION_MINOR}.${C9X_VERSION_REVISION}${C9X_VERSION_SUFFIX})
-MESSAGE(STATUS "OpenTX Companion ${C9X_VERSION}")
+option(DEBUG_IMPORT "Turn on debug output for EEPROM import") # Disabled by default
+if(DEBUG_IMPORT)
+  add_definitions(-DDEBUG_MODEL_IMPORT)
+  message(STATUS "EEPROM import debugging enabled")
+endif(DEBUG_IMPORT)
 
-CMAKE_MINIMUM_REQUIRED( VERSION 2.8.12 )
+option(TABLE_LAYOUT "Use QTableWidget for grid layouts") # Disabled by default
+if(TABLE_LAYOUT)
+  add_definitions(-DTABLE_LAYOUT)
+  message(STATUS "Using QTableWidget")
+endif(TABLE_LAYOUT)
 
-SET(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_SOURCE_DIR}/cmake)
+message(STATUS "Looking for SDL ")
+find_package(Sdl)
+if(SDL_FOUND)
+  include_directories(${SDL_INCLUDE_DIR})
+  message("SDL Include Path: " ${SDL_INCLUDE_DIR})
+  add_definitions(-DJOYSTICKS)
+  add_definitions(-DSIMU_AUDIO)
+else()
+  message("SDL not found! Joysticks support will be disabled. Simulator audio will not work.")
+endif()
 
-IF(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
-  SET(C9X_NAME_SUFFIX ${C9X_VERSION_MAJOR}${C9X_VERSION_MINOR})
-  SET(COMPANION_NAME "companion${C9X_NAME_SUFFIX}")
-  SET(SIMULATOR_NAME "simulator${C9X_NAME_SUFFIX}")
-  SET( SIMULATOR_LIB_PATH ${CMAKE_INSTALL_PREFIX}/lib/companion${C9X_NAME_SUFFIX} )
-ELSE(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
-  SET(COMPANION_NAME "companion")
-  SET(SIMULATOR_NAME "simulator")
-ENDIF(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
+message(STATUS "Looking for QT lupdate ")
+find_package(Lupdate)
+if(LUPDATE_FOUND)
+  message("QT lupdate: " ${LUPDATE_EXECUTABLE})
+else()
+  message("QT lupdate not found!")
+endif()
 
-OPTION(ALLOW_NIGHTLY_BUILDS "Allow nightly builds download / update") # Disabled by default 
-IF(ALLOW_NIGHTLY_BUILDS)
-	ADD_DEFINITIONS(-DALLOW_NIGHTLY_BUILDS)
-ENDIF(ALLOW_NIGHTLY_BUILDS)
+add_definitions(-DQXT_STATIC)
 
-OPTION(DEBUG_IMPORT "Turn on debug output for EEPROM import") # Disabled by default
-IF(DEBUG_IMPORT)
-    ADD_DEFINITIONS( -DDEBUG_MODEL_IMPORT)
-    MESSAGE( STATUS "EEPROM import debugging enabled" )
-ENDIF(DEBUG_IMPORT)
+if(MSVC)
+  set(CMAKE_CXX_FLAGS "/EHsc /LD")
+  include_directories(${PROJECT_SOURCE_DIR}/winbuild C:/Programs/pthreads/Pre-built.2/include C:/Programs/msinttypes C:/Programs/dirent/include)
+  link_directories(C:/Programs/pthreads/Pre-built.2/lib/)
+  set(PTHREAD_LIBRARY pthreadVC2.lib)
+else()
+  set(PTHREAD_LIBRARY pthread)
+  add_definitions(-Wall)
+  link_directories(/usr/local/lib)
+endif()
 
-MESSAGE( STATUS "Looking for XercesC " )
-FIND_PACKAGE(XercesC)
-IF ( XERCESC_FOUND )
-    INCLUDE_DIRECTORIES( ${XERCESC_INCLUDE_DIR} )
-    SET(LidarFormat_LIBRAIRIES ${LidarFormat_LIBRAIRIES} ${XERCESC_LIBRARIES})
-ELSE()
-    MESSAGE( FATAL_ERROR "XercesC not found! Please set XercesC path ..." )
-ENDIF()
-
-MESSAGE( STATUS "Looking for Xsd " )
-FIND_PACKAGE(Xsd)
-IF ( XSD_FOUND )
-    INCLUDE_DIRECTORIES( ${XSD_INCLUDE_DIR} )
-    MESSAGE("XSD Include Path: " ${XSD_INCLUDE_DIR} )
-ELSE()
-    MESSAGE( FATAL_ERROR "XSD not found! Please set XSD path ..." )
-ENDIF()
-
-MESSAGE( STATUS "Looking for SDL " )
-FIND_PACKAGE(Sdl)
-IF ( SDL_FOUND )
-    INCLUDE_DIRECTORIES( ${SDL_INCLUDE_DIR} )
-    MESSAGE("SDL Include Path: " ${SDL_INCLUDE_DIR} )
-    ADD_DEFINITIONS( -DJOYSTICKS )
-    ADD_DEFINITIONS( -DSIMU_AUDIO )
-ELSE()
-    MESSAGE( "SDL not found! Joysticks support will be disabled. Simulator audio will not work." )
-ENDIF()
-
-FIND_PACKAGE(Qt4 4.8.1 REQUIRED)
-SET( QT_USE_QTNETWORK True )
-SET( QT_USE_QTXML True )
-INCLUDE( ${QT_USE_FILE} )
-
-MESSAGE( STATUS "Looking for PHONON " )
-FIND_PACKAGE(Phonon)
-IF ( PHONON_FOUND )
-    INCLUDE_DIRECTORIES( ${PHONO_INCLUDE_DIR} )
-    MESSAGE("PHONON Include Path: " ${PHONON_INCLUDE_DIR} )
-    ADD_DEFINITIONS( -DPHONON )
-ELSE()
-    MESSAGE( "PHONON not found!" )
-ENDIF()
-
-MESSAGE( STATUS "Looking for QT lupdate " )
-FIND_PACKAGE(Lupdate)
-if( LUPDATE_FOUND )
-  MESSAGE( "QT lupdate: " ${LUPDATE_EXECUTABLE} )
-ELSE()
-  MESSAGE( "QT lupdate not found!" )
-ENDIF()
-
-ADD_CUSTOM_COMMAND(
-  COMMAND ${XSDCXX_EXECUTABLE} cxx-tree --root-element-all --generate-serialization --output-dir ${PROJECT_BINARY_DIR}/ ${PROJECT_SOURCE_DIR}/radio.xsd
-  OUTPUT ${PROJECT_BINARY_DIR}/radio.hxx ${PROJECT_BINARY_DIR}/radio.cxx
-  DEPENDS ${PROJECT_SOURCE_DIR}/radio.xsd
-)
-
-IF( MSVC )
-  SET(CMAKE_CXX_FLAGS "/EHsc /LD")
-  INCLUDE_DIRECTORIES( ${PROJECT_SOURCE_DIR}/winbuild C:/Programs/pthreads/Pre-built.2/include C:/Programs/msinttypes)
-  LINK_DIRECTORIES( C:/Programs/pthreads/Pre-built.2/lib/ )
-  SET( PTHREAD_LIBRARY pthreadVC2.lib )
-ELSE( )
-  SET( PTHREAD_LIBRARY pthread )
-  ADD_DEFINITIONS( -Wall )
-  LINK_DIRECTORIES( /usr/local/lib )
-ENDIF( )
-
-IF( MSVC )
-  MESSAGE( STATUS "Adding include C:/Programs/dirent/include for dirent.h" )
-  INCLUDE_DIRECTORIES( C:/programs/dirent/include )
-ENDIF( )
-
-set(RADIO_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/../../radio/src)
-set(SIMU_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/simulation)
-set(COMPANION_SRC_DIRECTORY ${PROJECT_SOURCE_DIR})
+set(RADIO_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/radio/src)
+set(SIMU_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/companion/src/simulation)
+set(COMPANION_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/companion/src)
 
 include_directories(
+  ${CMAKE_BINARY_DIR}
   ${CMAKE_CURRENT_BINARY_DIR}
-  ${PROJECT_SOURCE_DIR}/../..
-  ${PROJECT_SOURCE_DIR}/shared
+  ${COMPANION_SRC_DIRECTORY}
+  ${COMPANION_SRC_DIRECTORY}/shared
   ${SIMU_SRC_DIRECTORY}
-  ${XSD_INCLUDE_DIR}
+  ${COMPANION_SRC_DIRECTORY}/qxtcommandoptions
 )
 
 add_subdirectory(shared)
 add_subdirectory(modeledit)
 add_subdirectory(generaledit)
 add_subdirectory(simulation)
-add_subdirectory(firmwares/opentx/simulator)
 add_subdirectory(qcustomplot)
+add_subdirectory(qxtcommandoptions)
 
 set(common_SRCS
   eeprominterface.cpp
@@ -143,11 +94,12 @@ set(common_SRCS
   firmwares/opentx/opentxinterface.cpp
   file.cpp
   appdata.cpp
-)
+  )
 
-qt4_wrap_cpp(common_SRCS)
+qt5_wrap_cpp(common_SRCS)
 
 add_library(common ${common_SRCS})
+qt5_use_modules(common Core Xml Widgets)
 
 set(companion_SRCS
   hexinterface.cpp
@@ -188,7 +140,7 @@ set(companion_SRCS
   radionotfound.cpp
   wizarddata.cpp
   wizarddialog.cpp
-)
+  )
 
 set(companion_MOC_HDRS
   apppreferencesdialog.h
@@ -220,7 +172,7 @@ set(companion_MOC_HDRS
   wizarddialog.h
   modelprinter.h
   multimodelprinter.h
-)
+  )
 
 set(companion_UIS
   mdichild.ui
@@ -240,79 +192,50 @@ set(companion_UIS
   flashfirmwaredialog.ui
   flasheepromdialog.ui
   radionotfound.ui
-)
+  )
 
-set(companion_RCS
+set(companion_RESOURCES
   companion.qrc
   ${CMAKE_CURRENT_BINARY_DIR}/translations.qrc
-)
+  )
 
-MACRO (TODAY RESULT)
-    IF (WIN32)
-        EXECUTE_PROCESS(COMMAND "cmd" " /C date /T" OUTPUT_VARIABLE ${RESULT})
-        string(REGEX REPLACE "(..)/(..)/(....).*" "\\1.\\2.\\3" ${RESULT} ${${RESULT}})
-    ELSEIF(UNIX)
-        EXECUTE_PROCESS(COMMAND "date" "+%d/%m/%Y" OUTPUT_VARIABLE ${RESULT})
-        string(REGEX REPLACE "(..)/(..)/(....).*" "\\1.\\2.\\3" ${RESULT} ${${RESULT}})
-    ELSE (WIN32)
-        MESSAGE(SEND_ERROR "date not implemented")
-        SET(${RESULT} 00.00.0000)
-    ENDIF (WIN32)
-ENDMACRO (TODAY)
+configure_file(${COMPANION_SRC_DIRECTORY}/version.h.in ${CMAKE_BINARY_DIR}/version.h @ONLY)
+configure_file(${COMPANION_SRC_DIRECTORY}/translations.qrc.in ${CMAKE_CURRENT_BINARY_DIR}/translations.qrc @ONLY)
+configure_file(${COMPANION_SRC_DIRECTORY}/companion.desktop.in ${CMAKE_CURRENT_BINARY_DIR}/companion.desktop @ONLY)
+configure_file(${COMPANION_SRC_DIRECTORY}/simulator.desktop.in ${CMAKE_CURRENT_BINARY_DIR}/simulator.desktop @ONLY)
 
-MACRO (NOW RESULT)
-    IF (WIN32)
-        EXECUTE_PROCESS(COMMAND "cmd" " /C time /T" OUTPUT_VARIABLE ${RESULT})
-        string(REGEX REPLACE "(..):(..).*" "\\1:\\2:00" ${RESULT} ${${RESULT}})
-    ELSEIF(UNIX)
-        EXECUTE_PROCESS(COMMAND "date" "+%H:%M:%S" OUTPUT_VARIABLE ${RESULT})
-        string(REGEX REPLACE "(..):(..):(..).*" "\\1:\\2:\\3" ${RESULT} ${${RESULT}})
-    ELSE (WIN32)
-        MESSAGE(SEND_ERROR "time not implemented")
-        SET(${RESULT} 00:00:00)
-    ENDIF (WIN32)
-ENDMACRO (NOW)
+if(WIN32)
+  set(companion_SRCS ${companion_SRCS} icon.rc)
+  if(NOT MSVC)
+    set(CMAKE_EXE_LINKER_FLAGS -mwindows)
+  endif()
+endif()
 
-TODAY(DATE)
-NOW(TIME)
+include_directories(${CMAKE_BINARY_DIR})
+include_directories(${CMAKE_SOURCE_DIR})
 
-CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/version.h.in ${CMAKE_CURRENT_BINARY_DIR}/version.h @ONLY)
-CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/translations.qrc.in ${CMAKE_CURRENT_BINARY_DIR}/translations.qrc @ONLY)
-CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/companion.desktop.in ${CMAKE_CURRENT_BINARY_DIR}/companion.desktop @ONLY)
-CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/simulator.desktop.in ${CMAKE_CURRENT_BINARY_DIR}/simulator.desktop @ONLY)
+set(LANGUAGES he pl pt ru de fr es it sv cs fi nl)
+foreach(language ${LANGUAGES})
+  set(companion_TS ${companion_TS} translations/companion_${language}.ts)
+endforeach(language)
 
-IF( WIN32 )
-  SET( companion_SRCS ${companion_SRCS} icon.rc )
-  IF ( NOT MSVC )
-    SET(CMAKE_EXE_LINKER_FLAGS -mwindows)
-  ENDIF( )
-ENDIF( )
+qt5_wrap_ui(companion_SRCS ${companion_UIS})
+qt5_wrap_cpp(companion_SRCS ${companion_MOC_HDRS})
+qt5_add_translation(companion_QM ${companion_TS})
+qt5_add_resources(companion_RCC ${companion_RESOURCES})
 
-INCLUDE_DIRECTORIES( ${CMAKE_BINARY_DIR} )
-INCLUDE_DIRECTORIES( ${CMAKE_SOURCE_DIR} )
+add_definitions(-DQT_TRANSLATIONS_DIR="${QT_TRANSLATIONS_DIR}")
 
-SET( LANGUAGES he pl pt ru de fr es it sv cs fi nl)
-FOREACH( language ${LANGUAGES} )
-  SET( companion_TS ${companion_TS} translations/companion_${language}.ts )
-ENDFOREACH( language )
+if(APPLE)
+  add_executable(${COMPANION_NAME} MACOSX_BUNDLE ${companion_SRCS} ${companion_RCC} ${companion_QM})
+  # OS X compiler no longer automatically includes /Library/Frameworks in search path
+  set(CMAKE_EXE_LINKER_FLAGS -F/Library/Frameworks)
+else()
+  add_executable(${COMPANION_NAME} WIN32 ${companion_SRCS} ${companion_RCC} ${companion_QM})
+endif()
 
-set( companion_SRCS ${companion_SRCS}  )
-QT4_WRAP_UI( companion_SRCS ${companion_UIS} )
-QT4_WRAP_CPP( companion_SRCS ${companion_MOC_HDRS} )
-QT4_ADD_TRANSLATION( companion_QM ${companion_TS}  )
-QT4_ADD_RESOURCES( companion_SRCS ${companion_RCS} )
-
-ADD_DEFINITIONS( -DQT_TRANSLATIONS_DIR="${QT_TRANSLATIONS_DIR}" )
-
-IF( APPLE )
-    ADD_EXECUTABLE( ${COMPANION_NAME} MACOSX_BUNDLE ${companion_SRCS} ${companion_QM} )
-    # OS X compiler no longer automatically includes /Library/Frameworks in search path
-    SET( CMAKE_EXE_LINKER_FLAGS -F/Library/Frameworks )
-ELSE( )
-    ADD_EXECUTABLE( ${COMPANION_NAME} WIN32 ${companion_SRCS} ${companion_QM} )
-ENDIF( )
-
-target_link_libraries(${COMPANION_NAME} generaledit modeledit simulation common qcustomplot shared ${QT_LIBRARIES} ${QT_QTMAIN_LIBRARY} ${XERCESC_LIBRARY} ${PTHREAD_LIBRARY} ${SDL_LIBRARY} ${PHONON_LIBS})
+qt5_use_modules(${COMPANION_NAME} Core Widgets Network)
+target_link_libraries(${COMPANION_NAME} PRIVATE generaledit modeledit simulation common qcustomplot shared ${PTHREAD_LIBRARY} ${SDL_LIBRARY})
 
 ############# Standalone simu ###############
 
@@ -320,160 +243,159 @@ set(simu_SRCS
   modeledit/node.cpp
   modeledit/edge.cpp # TODO not needed
   simulator.cpp
-)
+  )
 
 set(simu_MOC_HDRS
   modeledit/node.h
-)
+  )
 
-set( simu_SRCS ${simu_SRCS} )
-qt4_wrap_cpp(simu_SRCS ${simu_MOC_HDRS} )
-qt4_add_resources(simu_SRCS companion.qrc) # TODO not needed
+qt5_wrap_cpp(simu_SRCS ${simu_MOC_HDRS} )
 
 if(WIN32)
   set(simu_SRCS ${simu_SRCS} icon.rc)
 endif()
 
 if(APPLE)
-  add_executable(${SIMULATOR_NAME} MACOSX_BUNDLE ${simu_SRCS})
+  add_executable(${SIMULATOR_NAME} MACOSX_BUNDLE ${simu_SRCS} ${companion_RCC})
 else()
-  add_executable(${SIMULATOR_NAME} WIN32 ${simu_SRCS})
+  add_executable(${SIMULATOR_NAME} WIN32 ${simu_SRCS} ${companion_RCC})
 endif()
 
-target_link_libraries(${SIMULATOR_NAME} simulation common ${QT_LIBRARIES} ${QT_QTMAIN_LIBRARY} ${PTHREAD_LIBRARY} ${SDL_LIBRARY} ${PHONON_LIBS} ${OPENTX_SIMULATOR_LIBS})
+# TODO not the same link command than companion?
+target_link_libraries(${SIMULATOR_NAME} PRIVATE simulation common qxtcommandoptions ${QT_LIBRARIES} ${QT_QTMAIN_LIBRARY} ${PTHREAD_LIBRARY} ${SDL_LIBRARY} ${OPENTX_SIMULATOR_LIBS})
 
 ############# Packaging ####################
 
-IF(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
-    INSTALL( TARGETS ${COMPANION_NAME} DESTINATION ${CMAKE_INSTALL_PREFIX}/bin )
-    INSTALL( TARGETS ${SIMULATOR_NAME} DESTINATION ${CMAKE_INSTALL_PREFIX}/bin )
-    INSTALL( FILES ${CMAKE_CURRENT_BINARY_DIR}/companion.desktop DESTINATION share/applications RENAME companion${C9X_NAME_SUFFIX}.desktop)
-    INSTALL( FILES ${CMAKE_CURRENT_BINARY_DIR}/simulator.desktop DESTINATION share/applications RENAME simulator${C9X_NAME_SUFFIX}.desktop)
-    INSTALL( FILES images/linuxicons/16x16/companion.png    DESTINATION /usr/share/icons/hicolor/16x16/apps    RENAME companion${C9X_NAME_SUFFIX}.png )
-    INSTALL( FILES images/linuxicons/22x22/companion.png    DESTINATION /usr/share/icons/hicolor/22x22/apps    RENAME companion${C9X_NAME_SUFFIX}.png )
-    INSTALL( FILES images/linuxicons/24x24/companion.png    DESTINATION /usr/share/icons/hicolor/24x24/apps    RENAME companion${C9X_NAME_SUFFIX}.png )
-    INSTALL( FILES images/linuxicons/32x32/companion.png    DESTINATION /usr/share/icons/hicolor/32x32/apps    RENAME companion${C9X_NAME_SUFFIX}.png )
-    INSTALL( FILES images/linuxicons/48x48/companion.png    DESTINATION /usr/share/icons/hicolor/48x48/apps    RENAME companion${C9X_NAME_SUFFIX}.png )
-    INSTALL( FILES images/linuxicons/128x128/companion.png  DESTINATION /usr/share/icons/hicolor/128x128/apps  RENAME companion${C9X_NAME_SUFFIX}.png )
-    INSTALL( FILES images/linuxicons/256x256/companion.png  DESTINATION /usr/share/icons/hicolor/256x256/apps  RENAME companion${C9X_NAME_SUFFIX}.png )
-    INSTALL( FILES images/linuxicons/512x512/companion.png  DESTINATION /usr/share/icons/hicolor/512x512/apps  RENAME companion${C9X_NAME_SUFFIX}.png )
-    INSTALL( FILES images/linuxicons/scalable/companion.svg DESTINATION /usr/share/icons/hicolor/scalable/apps RENAME companion${C9X_NAME_SUFFIX}.svg )
-    INSTALL( FILES ../targets/linux/45-companion-taranis.rules DESTINATION /lib/udev/rules.d RENAME 45-companion${C9X_NAME_SUFFIX}-taranis.rules)
-    # Linux specific code
-    SET(OperatingSystem "Linux")
-ELSE (${CMAKE_SYSTEM_NAME} MATCHES "Linux")
-    INSTALL( TARGETS ${COMPANION_NAME} DESTINATION ${QT_BINARY_DIR} )
-ENDIF(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
+if(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
+  install(TARGETS ${COMPANION_NAME} DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
+  install(TARGETS ${SIMULATOR_NAME} DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
+  install(FILES ${CMAKE_CURRENT_BINARY_DIR}/companion.desktop DESTINATION share/applications RENAME companion${C9X_NAME_SUFFIX}.desktop)
+  install(FILES ${CMAKE_CURRENT_BINARY_DIR}/simulator.desktop DESTINATION share/applications RENAME simulator${C9X_NAME_SUFFIX}.desktop)
+  install(FILES images/linuxicons/16x16/companion.png DESTINATION /usr/share/icons/hicolor/16x16/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/22x22/companion.png DESTINATION /usr/share/icons/hicolor/22x22/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/24x24/companion.png DESTINATION /usr/share/icons/hicolor/24x24/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/32x32/companion.png DESTINATION /usr/share/icons/hicolor/32x32/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/48x48/companion.png DESTINATION /usr/share/icons/hicolor/48x48/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/128x128/companion.png DESTINATION /usr/share/icons/hicolor/128x128/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/256x256/companion.png DESTINATION /usr/share/icons/hicolor/256x256/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/512x512/companion.png DESTINATION /usr/share/icons/hicolor/512x512/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/scalable/companion.svg DESTINATION /usr/share/icons/hicolor/scalable/apps RENAME companion${C9X_NAME_SUFFIX}.svg)
+  install(FILES ../targets/linux/45-companion-taranis.rules DESTINATION /lib/udev/rules.d RENAME 45-companion${C9X_NAME_SUFFIX}-taranis.rules)
+  # Linux specific code
+  set(OperatingSystem "Linux")
+else()
+  get_target_property(QtCore_LOCATION Qt5::Core LOCATION)
+  get_filename_component(QT_DLL_DIR ${QtCore_LOCATION} PATH)
+  get_filename_component(SDL_DIR ${SDL_LIBRARY} PATH)
+  install(FILES ${QT_DLL_DIR}/icudt54.dll ${QT_DLL_DIR}/icuin54.dll ${QT_DLL_DIR}/icuuc54.dll ${QT_DLL_DIR}/Qt5Core.dll ${QT_DLL_DIR}/Qt5Gui.dll ${QT_DLL_DIR}/Qt5Widgets.dll ${QT_DLL_DIR}/Qt5Xml.dll ${QT_DLL_DIR}/Qt5Network.dll ${QT_DLL_DIR}/Qt5PrintSupport.dll ${QT_DLL_DIR}/Qt5Multimedia.dll ${SDL_DIR}/SDL.dll DESTINATION ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/$<CONFIG>)
+  install(FILES ${QT_DLL_DIR}/icudt54.dll ${QT_DLL_DIR}/icuin54.dll ${QT_DLL_DIR}/icuuc54.dll ${QT_DLL_DIR}/Qt5Cored.dll ${QT_DLL_DIR}/Qt5Guid.dll ${QT_DLL_DIR}/Qt5Widgetsd.dll ${QT_DLL_DIR}/Qt5Xmld.dll ${QT_DLL_DIR}/Qt5Networkd.dll ${QT_DLL_DIR}/Qt5PrintSupportd.dll ${QT_DLL_DIR}/Qt5Multimediad.dll ${SDL_DIR}/SDL.dll DESTINATION ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/$<CONFIG>)
+endif()
 
-IF( WIN32 )
-  IF( MSVC )
-    SET(COMPANION_NSI_IN_FILE companion-vs.nsi.in)
-    SET(SIMULATOR_NSI_IN_FILE simulator-vs.nsi.in)
-  ELSE( )
-    SET(COMPANION_NSI_IN_FILE companion-msys.nsi.in)
-    SET(SIMULATOR_NSI_IN_FILE simulator-msys.nsi.in)
-  ENDIF( )
+if(WIN32)
+  if(MSVC)
+    set(COMPANION_NSI_IN_FILE companion-vs.nsi.in)
+    set(SIMULATOR_NSI_IN_FILE simulator-vs.nsi.in)
+  else()
+    set(COMPANION_NSI_IN_FILE companion-msys.nsi.in)
+    set(SIMULATOR_NSI_IN_FILE simulator-msys.nsi.in)
+  endif()
 
-  SET( SYSDIR "$ENV{windir}/system32" )
-  CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/../targets/windows/${COMPANION_NSI_IN_FILE} ${CMAKE_CURRENT_BINARY_DIR}/companion.nsi @ONLY)
-  CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/../targets/windows/${SIMULATOR_NSI_IN_FILE} ${CMAKE_CURRENT_BINARY_DIR}/simulator.nsi @ONLY)
+  set(SYSDIR "$ENV{windir}/system32")
+  configure_file(${CMAKE_CURRENT_SOURCE_DIR}/../targets/windows/${COMPANION_NSI_IN_FILE} ${PROJECT_BINARY_DIR}/companion/companion.nsi @ONLY)
+  configure_file(${CMAKE_CURRENT_SOURCE_DIR}/../targets/windows/${SIMULATOR_NSI_IN_FILE} ${PROJECT_BINARY_DIR}/companion/simulator.nsi @ONLY)
 
-  FIND_PROGRAM(NSIS_EXE makensis.exe PATHS
+  find_program(NSIS_EXE makensis.exe PATHS
     "C:/Program Files/NSIS"
     "C:/Program Files (x86)/NSIS"
     "C:/Programs/NSIS"
-  )
+    )
 
-  ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/companion-windows.exe
-                     COMMAND "${NSIS_EXE}" ARGS companion.nsi
-                     DEPENDS companion simulator opentx-simulators ${PROJECT_BINARY_DIR}/companion.nsi
-                     COMMENT "Companion Windows NSIS Installer")
+  add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/companion/companion-windows.exe
+    COMMAND "${NSIS_EXE}" ARGS ${PROJECT_BINARY_DIR}/companion/companion.nsi
+    DEPENDS companion simulator opentx-simulators ${PROJECT_BINARY_DIR}/companion/companion.nsi
+    COMMENT "Companion Windows NSIS Installer")
 
-  ADD_CUSTOM_COMMAND(OUTPUT ${PROJECT_BINARY_DIR}/simulator-install.exe
-                     COMMAND "${NSIS_EXE}" ARGS simulator.nsi
-                     DEPENDS simulator opentx-simulators ${PROJECT_BINARY_DIR}/simulator.nsi
-                     COMMENT "Simulator Windows NSIS Installer")
+  add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/companion/simulator-install.exe
+    COMMAND "${NSIS_EXE}" ARGS ${PROJECT_BINARY_DIR}/companion/simulator.nsi
+    DEPENDS simulator ${PROJECT_BINARY_DIR}/companion/simulator.nsi
+    COMMENT "Simulator Windows NSIS Installer")
 
-  ADD_CUSTOM_TARGET( installer
-    DEPENDS ${PROJECT_BINARY_DIR}/companion-windows.exe
-    DEPENDS ${PROJECT_BINARY_DIR}/simulator-windows.exe
-    SOURCES ${PROJECT_BINARY_DIR}/companion.nsi
-    SOURCES ${PROJECT_BINARY_DIR}/simulator.nsi
-  )
-ENDIF( )
+  add_custom_target(installer
+    DEPENDS ${PROJECT_BINARY_DIR}/companion/companion-windows.exe
+    DEPENDS ${PROJECT_BINARY_DIR}/companion/simulator-windows.exe
+    SOURCES ${PROJECT_BINARY_DIR}/companion/companion.nsi
+    SOURCES ${PROJECT_BINARY_DIR}/companion/simulator.nsi
+    )
+endif()
 
-IF( APPLE )
-  SET(MACOSX_BUNDLE_ICON_FILE iconmac.icns)
-  IF( CMAKE_GENERATOR STREQUAL Xcode )
-    SET( WORK_DIR ${CMAKE_BINARY_DIR}/Debug )
-  ELSE( )
-    SET( WORK_DIR ${PROJECT_BINARY_DIR} )
-  ENDIF()
+if(APPLE)
+  set(MACOSX_BUNDLE_ICON_FILE iconmac.icns)
+  if(CMAKE_GENERATOR STREQUAL Xcode)
+    set(WORK_DIR ${CMAKE_BINARY_DIR}/Debug)
+  else()
+    set(WORK_DIR ${PROJECT_BINARY_DIR})
+  endif()
 
-  ADD_CUSTOM_TARGET( addframeworks
-                     COMMAND mkdir -p companion.app/Contents/Frameworks
-                     COMMAND mkdir -p companion.app/Contents/Resources
-                     COMMAND mkdir -p companion.app/Contents/translations
-                     COMMAND rsync ${PROJECT_SOURCE_DIR}/images/${MACOSX_BUNDLE_ICON_FILE} companion.app/Contents/Resources/${MACOSX_BUNDLE_ICON_FILE} # Copy the icon files
-                     COMMAND rsync -r --exclude=.svn  ${PROJECT_SOURCE_DIR}/../targets/mac/qt_menu.nib companion.app/Contents/Resources/
-                     COMMAND rsync ${PROJECT_BINARY_DIR}/*.qm companion.app/Contents/translations
-                     COMMAND rsync ${PROJECT_BINARY_DIR}/*.qm companion.app/Contents/translations
-                     COMMAND rsync -r ${XSD_INCLUDE_DIR}/.. companion.app/Contents/Frameworks/
-                     COMMAND rsync -r /Library/Frameworks/SDL.framework companion.app/Contents/Frameworks/
-                     COMMAND ${QT_BINARY_DIR}/macdeployqt companion.app
-                     COMMAND install_name_tool -change @rpath/SDL.framework/Versions/A/SDL @executable_path/../Frameworks/SDL.framework/Versions/A/SDL companion.app/Contents/MacOS/companion
-                     WORKING_DIRECTORY ${WORK_DIR}
-                     DEPENDS ${COMPANION_NAME} )
+  add_custom_target(addframeworks
+    COMMAND mkdir -p companion.app/Contents/Frameworks
+    COMMAND mkdir -p companion.app/Contents/Resources
+    COMMAND mkdir -p companion.app/Contents/translations
+    COMMAND rsync ${PROJECT_SOURCE_DIR}/images/${MACOSX_BUNDLE_ICON_FILE} companion.app/Contents/Resources/${MACOSX_BUNDLE_ICON_FILE} # Copy the icon files
+    COMMAND rsync -r --exclude=.svn ${PROJECT_SOURCE_DIR}/../targets/mac/qt_menu.nib companion.app/Contents/Resources/
+    COMMAND rsync ${PROJECT_BINARY_DIR}/*.qm companion.app/Contents/translations
+    COMMAND rsync ${PROJECT_BINARY_DIR}/*.qm companion.app/Contents/translations
+    COMMAND rsync -r /Library/Frameworks/SDL.framework companion.app/Contents/Frameworks/
+    COMMAND ${QT_BINARY_DIR}/macdeployqt companion.app
+    COMMAND install_name_tool -change @rpath/SDL.framework/Versions/A/SDL @executable_path/../Frameworks/SDL.framework/Versions/A/SDL companion.app/Contents/MacOS/companion
+    WORKING_DIRECTORY ${WORK_DIR}
+    DEPENDS ${COMPANION_NAME})
 
-  ADD_CUSTOM_TARGET( makedmg
-                     COMMAND ${QT_BINARY_DIR}/macdeployqt companion.app -dmg -no-plugins
-                     WORKING_DIRECTORY ${WORK_DIR}
-                     DEPENDS addframeworks opentx-simulators-bundle)
-ENDIF( )
+  add_custom_target(makedmg
+    COMMAND ${QT_BINARY_DIR}/macdeployqt companion.app -dmg -no-plugins
+    WORKING_DIRECTORY ${WORK_DIR}
+    DEPENDS addframeworks opentx-simulators-bundle)
+endif()
 
-ADD_CUSTOM_TARGET( stamp
-                   COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_BINARY_DIR}/version.h ${CMAKE_SOURCE_DIR}/../companion.stamp
-                   DEPENDS ${CMAKE_BINARY_DIR}/version.h )
-
-IF( LUPDATE_FOUND )
-  ADD_CUSTOM_TARGET( translations
+if(LUPDATE_FOUND)
+  add_custom_target(translations
     WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
     COMMAND ${LUPDATE_EXECUTABLE} ${CMAKE_SOURCE_DIR} -no-obsolete -ts ${companion_TS}
-  )
-ELSE()
-  ADD_CUSTOM_TARGET( translations
+    )
+else()
+  add_custom_target(translations
     COMMAND echo "Sorry, QT lupdate was not found."
-  )
-ENDIF()
+    )
+endif()
 
-SET(CPACK_PACKAGE_NAME "companion${C9X_NAME_SUFFIX}")
-SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Models and settings editor for the OpenTx open source firmware")
+set(CPACK_PACKAGE_NAME "companion${C9X_NAME_SUFFIX}")
+set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Models and settings editor for the OpenTx open source firmware")
 string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_PACKAGE_NAME_LOWERCASE)
 
-# The file stripping is deliberately disabled, with the stripped file we get 
+# The file stripping is deliberately disabled, with the stripped file we get
 # very poor trace-backs from the users when they report Companion crash
-SET( CPACK_STRIP_FILES FALSE )
+set(CPACK_STRIP_FILES FALSE)
 
 find_program(DPKG_PROGRAM dpkg DOC "dpkg program of Debian-based systems")
 if(DPKG_PROGRAM)
-  SET(CPACK_GENERATOR "DEB")
+  set(CPACK_GENERATOR "DEB")
   execute_process(
     COMMAND ${DPKG_PROGRAM} --print-architecture
     OUTPUT_VARIABLE CPACK_DEBIAN_PACKAGE_ARCHITECTURE
     OUTPUT_STRIP_TRAILING_WHITESPACE
   )
-  SET(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME_LOWERCASE}_${C9X_VERSION}_${CPACK_DEBIAN_PACKAGE_ARCHITECTURE}")
-  SET(CPACK_DEBIAN_PACKAGE_MAINTAINER "Bertrand Songis <bsongis-nosp@m-gmail.com>")
-  SET(CPACK_DEBIAN_PACKAGE_VERSION ${C9X_VERSION})
-  SET(CPACK_DEBIAN_PACKAGE_VERSION_MAJOR ${C9X_VERSION_MAJOR})
-  SET(CPACK_DEBIAN_PACKAGE_VERSION_MINOR ${C9X_VERSION_MINOR})
-  SET(CPACK_DEBIAN_ARCHITECTURE $(CMAKE_SYSTEM_PROCESSOR))
-  SET(CPACK_DEBIAN_PACKAGE_SHLIBDEPS ON)
+  set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME_LOWERCASE}_${VERSION}_${CPACK_DEBIAN_PACKAGE_ARCHITECTURE}")
+  set(CPACK_DEBIAN_PACKAGE_MAINTAINER "Bertrand Songis <bsongis-nosp@m-gmail.com>")
+  set(CPACK_DEBIAN_PACKAGE_VERSION ${VERSION})
+  set(CPACK_DEBIAN_PACKAGE_VERSION_MAJOR ${VERSION_MAJOR})
+  set(CPACK_DEBIAN_PACKAGE_VERSION_MINOR ${VERSION_MINOR})
+  set(CPACK_DEBIAN_ARCHITECTURE $(CMAKE_SYSTEM_PROCESSOR))
+  set(CPACK_DEBIAN_PACKAGE_SHLIBDEPS ON)
 else(DPKG_PROGRAM)
-  SET(CPACK_GENERATOR "RPM")
-  SET(CPACK_RPM_PACKAGE_VERSION ${C9X_VERSION})
-  SET(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
-  SET(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME_LOWERCASE}-${C9X_VERSION}-${CMAKE_SYSTEM_PROCESSOR}")
+  set(CPACK_GENERATOR "RPM")
+  set(CPACK_RPM_PACKAGE_VERSION ${VERSION})
+  set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
+  set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME_LOWERCASE}-${VERSION}-${CMAKE_SYSTEM_PROCESSOR}")
+  SET(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION "/lib /lib/udev /lib/udev/rules.d")
 endif(DPKG_PROGRAM)
 
-INCLUDE(CPack)
+include(CPack)

companion/src/appdata.cpp

@@ -312,6 +312,8 @@ QString Profile::speaker()       const { return _speaker;       }
 QString Profile::stickPotCalib() const { return _stickPotCalib; }
 QString Profile::timeStamp()     const { return _timeStamp;     }
 QString Profile::trainerCalib()  const { return _trainerCalib;  }
+QString Profile::controlTypes()  const { return _controlTypes;  }
+QString Profile::controlNames()  const { return _controlNames;  }
 int     Profile::txCurrentCalibration()  const { return _txCurrentCalibration;  }
 int     Profile::gsStickMode()   const { return _gsStickMode;   }
 int     Profile::ppmMultiplier() const { return _ppmMultiplier; }
@@ -342,6 +344,8 @@ void Profile::speaker       (const QString x) { store(x, _speaker,       "Speake
 void Profile::stickPotCalib (const QString x) { store(x, _stickPotCalib, "StickPotCalib"         ,"Profiles", QString("profile%1").arg(index));}
 void Profile::timeStamp     (const QString x) { store(x, _timeStamp,     "TimeStamp"             ,"Profiles", QString("profile%1").arg(index));}
 void Profile::trainerCalib  (const QString x) { store(x, _trainerCalib,  "TrainerCalib"          ,"Profiles", QString("profile%1").arg(index));}
+void Profile::controlTypes  (const QString x) { store(x, _controlTypes,  "ControlTypes"          ,"Profiles", QString("profile%1").arg(index));}
+void Profile::controlNames  (const QString x) { store(x, _controlNames,  "ControlNames"          ,"Profiles", QString("profile%1").arg(index));}
 void Profile::txCurrentCalibration  (const int x) { store(x, _txCurrentCalibration, "currentCalib","Profiles", QString("profile%1").arg(index));}
 void Profile::gsStickMode   (const int     x) { store(x, _gsStickMode,   "GSStickMode"           ,"Profiles", QString("profile%1").arg(index));}
 void Profile::ppmMultiplier (const int     x) { store(x, _ppmMultiplier, "PPM_Multiplier"        ,"Profiles", QString("profile%1").arg(index));}
@@ -378,6 +382,8 @@ Profile& Profile::operator=(const Profile& rhs)
     speaker      ( rhs.speaker()       );
     stickPotCalib( rhs.stickPotCalib() );
     trainerCalib ( rhs.trainerCalib()  );
+    controlTypes ( rhs.controlTypes()  );
+    controlNames ( rhs.controlNames()  );
     txCurrentCalibration ( rhs.txCurrentCalibration()  );
     gsStickMode  ( rhs.gsStickMode()   );
     ppmMultiplier( rhs.ppmMultiplier() );
@@ -423,6 +429,8 @@ void Profile::initFwVariables()
     _stickPotCalib = "";
     _timeStamp =     "";
     _trainerCalib =  "";
+    _controlTypes =  "";
+    _controlNames =  "";
 
     _txCurrentCalibration =  0;
     _gsStickMode =   0;
@@ -483,6 +491,8 @@ void Profile::flush()
     getset( _stickPotCalib, "StickPotCalib"         ,""     ,"Profiles", QString("profile%1").arg(index));
     getset( _timeStamp,     "TimeStamp"             ,""     ,"Profiles", QString("profile%1").arg(index));
     getset( _trainerCalib,  "TrainerCalib"          ,""     ,"Profiles", QString("profile%1").arg(index));
+    getset( _controlTypes,  "ControlTypes"          ,""     ,"Profiles", QString("profile%1").arg(index));
+    getset( _controlNames,  "ControlNames"          ,""     ,"Profiles", QString("profile%1").arg(index));
     getset( _txCurrentCalibration,  "currentCalib"          ,0      ,"Profiles", QString("profile%1").arg(index));
     getset( _gsStickMode,   "GSStickMode"           ,0      ,"Profiles", QString("profile%1").arg(index));
     getset( _ppmMultiplier, "PPM_Multiplier"        ,0      ,"Profiles", QString("profile%1").arg(index));
@@ -595,6 +605,10 @@ void AppData::warningId       (const int         x) { store(x, _warningId,
 
 // Constructor
 AppData::AppData()
+{
+}
+
+void AppData::init()
 {
     //Initialize the profiles
     for (int i=0; i<MAX_PROFILES; i++)
@@ -604,8 +618,28 @@ AppData::AppData()
     for (int i=0; i<MAX_JOYSTICKS; i++)
         joystick[i].init( i );
 
-    // Copy existing 2.0.16 settings if present
     QSettings settings(COMPANY, PRODUCT);
+
+    // Copy existing 2.1 settings if present
+    if (profile[0].name().isEmpty())
+    {
+        QSettings settings21("OpenTX", "Companion 2.1");
+
+        QStringList keys = settings21.allKeys();
+        for (QStringList::iterator i=keys.begin(); i!=keys.end(); i++)
+        {
+            if (settings21.value(*i) != QString("") && settings21.value(*i) != QString("Start Menu Folder"))
+            {
+                settings.setValue(*i, settings21.value(*i));
+            }
+        }
+
+        //Reload profiles
+        for (int i=0; i<MAX_PROFILES; i++)
+            profile[i].init( i );
+    }
+
+    // Copy existing 2.0 settings if present
     if (profile[0].name().isEmpty())
     {
         QSettings settings20("OpenTX", "Companion 2.0");
@@ -737,7 +771,7 @@ AppData::AppData()
     getset( _updatesDir,      "lastUpdatesDir"          ,"" );
 
     getset( _outputDisplayDetails,  "outputDisplayDetails"     ,false );
-    getset( _enableBackup,    "backupEnable"            ,false );
+    getset( _enableBackup,    "enableBackup"            ,false );
     getset( _backupOnFlash,   "backupOnFlash"           ,true  );
     getset( _checkHardwareCompatibility,   "checkHardwareCompatibility"           ,true  );
 

companion/src/appdata.h

@@ -25,7 +25,7 @@
 #include <QSettings>
 
 #define COMPANY "OpenTX"
-#define PRODUCT "Companion 2.1"
+#define PRODUCT "Companion 2.2"
 
 #define MAX_PROFILES 15
 #define MAX_JOYSTICKS 8
@@ -125,6 +125,8 @@ class Profile: protected CompStoreObj
     QString _stickPotCalib;
     QString _timeStamp;
     QString _trainerCalib;
+    QString _controlTypes;
+    QString _controlNames;
     int     _txCurrentCalibration;
     int     _gsStickMode;
     int     _ppmMultiplier;
@@ -156,6 +158,8 @@ class Profile: protected CompStoreObj
     QString stickPotCalib() const;
     QString timeStamp() const;
     QString trainerCalib() const;
+    QString controlTypes() const;
+    QString controlNames() const;
     int     txCurrentCalibration() const;
     int     gsStickMode() const;
     int     ppmMultiplier() const;
@@ -186,6 +190,8 @@ class Profile: protected CompStoreObj
     void stickPotCalib (const QString);
     void timeStamp     (const QString);
     void trainerCalib  (const QString);
+    void controlTypes  (const QString);
+    void controlNames  (const QString);
     void txCurrentCalibration  (const int);
     void gsStickMode   (const int);
     void ppmMultiplier (const int);
@@ -378,6 +384,7 @@ class AppData: protected CompStoreObj
 
     // Constructor
     AppData();
+    void init();
 };
 
 extern AppData g;

companion/src/apppreferencesdialog.cpp

@@ -109,14 +109,9 @@ void AppPreferencesDialog::initSettings()
     ui->snapshotPath->setDisabled(true);
     ui->snapshotPathButton->setDisabled(true);
   }
-#if defined(ALLOW_NIGHTLY_BUILDS)
   ui->useCompanionNightlyBuilds->setChecked(g.useCompanionNightlyBuilds());
-  ui->useFirmwareNightlyBuilds->setChecked(g.useFirmwareNightlyBuilds());
-#else
-  ui->useCompanionNightlyBuilds->hide();
-  ui->useFirmwareNightlyBuilds->hide();
-#endif
   ui->autoCheckCompanion->setChecked(g.autoCheckApp());
+  ui->useFirmwareNightlyBuilds->setChecked(g.useFirmwareNightlyBuilds());
   ui->autoCheckFirmware->setChecked(g.autoCheckFw());
   ui->showSplash->setChecked(g.showSplash());
   ui->historySize->setValue(g.historySize());

companion/src/burnconfigdialog.h

@@ -1,8 +1,7 @@
 #ifndef BURNCONFIGDIALOG_H_
 #define BURNCONFIGDIALOG_H_
 
-#include <QDialog>
-#include <QtGui>
+#include <QtWidgets>
 
 #define MEM_TYPE_EEPROM 1
 #define MEM_TYPE_FLASH  2

companion/src/companion.cpp

@@ -82,15 +82,18 @@ class MyProxyStyle : public QProxyStyle
 int main(int argc, char *argv[])
 {
   Q_INIT_RESOURCE(companion);
+
   QApplication app(argc, argv);
   app.setApplicationName("OpenTX Companion");
   app.setOrganizationName("OpenTX");
   app.setOrganizationDomain("open-tx.org");
   app.setAttribute(Qt::AA_DontShowIconsInMenus, false);
 
+  g.init();
+
   QStringList strl = QApplication::arguments();
   if (strl.contains("--version")) {
-    printf("%s\n", C9X_VERSION);
+    printf("%s\n", VERSION);
     fflush(stdout);
     exit(0);
   }
@@ -106,7 +109,7 @@ int main(int argc, char *argv[])
   app.installTranslator(&companionTranslator);
   app.installTranslator(&qtTranslator);
 
-  QTextCodec::setCodecForCStrings(QTextCodec::codecForName("UTF-8"));
+  // QTextCodec::setCodecForCStrings(QTextCodec::codecForName("UTF-8"));
 
 #if defined(JOYSTICKS) || defined(SIMU_AUDIO)
   uint32_t sdlFlags = 0;

companion/src/companion.desktop.in

@@ -1,7 +1,7 @@
 [Desktop Entry]
 Type=Application
 Encoding=UTF-8
-Name=Companion @C9X_VERSION@
+Name=Companion @VERSION@
 GenericName=Transmitter Companion App
 Comment=The Ultimate Transmitter Companion
 Icon=@COMPANION_NAME@

companion/src/companion.qrc

@@ -1,43 +1,58 @@
-<RCC>
+<!DOCTYPE RCC><RCC version="1.0">
   <qresource prefix="/">
     <file>images/customize.png</file>
     <file>icon.png</file>
     <file>../../CREDITS.txt</file>
     <file>../../DONATIONS.txt</file>
     <file>../releasenotes.txt</file>
-    <file>images/9xdb.png</file>
-    <file>images/9xdl.png</file>
-    <file>images/9xdr.png</file>
-    <file>images/9xdt.png</file>
-    <file>images/9xdb-bl.png</file>
-    <file>images/9xdl-bl.png</file>
-    <file>images/9xdr-bl.png</file>
-    <file>images/9xdt-bl.png</file>
-    <file>images/9xdb-gr.png</file>
-    <file>images/9xdl-gr.png</file>
-    <file>images/9xdr-gr.png</file>
-    <file>images/9xdt-gr.png</file>
-    <file>images/9xdb-or.png</file>
-    <file>images/9xdl-or.png</file>
-    <file>images/9xdr-or.png</file>
-    <file>images/9xdt-or.png</file>
-    <file>images/9xdb-yl.png</file>
-    <file>images/9xdl-yl.png</file>
-    <file>images/9xdr-yl.png</file>
-    <file>images/9xdt-yl.png</file>
-    <file>images/9xdb-rd.png</file>
-    <file>images/9xdl-rd.png</file>
-    <file>images/9xdr-rd.png</file>
-    <file>images/9xdt-rd.png</file>
-    <file>images/9xmenu.png</file>
-    <file>images/9xmenumenu.png</file>
-    <file>images/9xmenuexit.png</file>
-    <file>images/9xcurs.png</file>
-    <file>images/9xcursup.png</file>
-    <file>images/9xcursplus.png</file>
-    <file>images/9xcursmin.png</file>
-    <file>images/9xcursdown.png</file>
-    <file>images/9xcursphoto.png</file>
+    <file>images/simulator/Horus/middle.png</file>
+    <file>images/simulator/Horus/left.png</file>
+    <file>images/simulator/Horus/right.png</file>
+    <file>images/simulator/Horus/top.png</file>
+    <file>images/simulator/Horus/bottom.png</file>
+    <file>images/simulator/Horus/led.png</file>
+    <file>images/simulator/Horus/border-right.png</file>
+    <file>images/simulator/Horus/left_btn1.png</file>
+    <file>images/simulator/Horus/left_btn2.png</file>
+    <file>images/simulator/Horus/left_scrnsht.png</file>
+    <file>images/simulator/Horus/right_btnU.png</file>
+    <file>images/simulator/Horus/right_btnL.png</file>
+    <file>images/simulator/Horus/right_btnD.png</file>
+    <file>images/simulator/Horus/right_btnR.png</file>
+    <file>images/simulator/Horus/right_ent.png</file>    
+    <file>images/simulator/9X/9xdb.png</file>
+    <file>images/simulator/9X/9xdl.png</file>
+    <file>images/simulator/9X/9xdr.png</file>
+    <file>images/simulator/9X/9xdt.png</file>
+    <file>images/simulator/9X/9xdb-bl.png</file>
+    <file>images/simulator/9X/9xdl-bl.png</file>
+    <file>images/simulator/9X/9xdr-bl.png</file>
+    <file>images/simulator/9X/9xdt-bl.png</file>
+    <file>images/simulator/9X/9xdb-gr.png</file>
+    <file>images/simulator/9X/9xdl-gr.png</file>
+    <file>images/simulator/9X/9xdr-gr.png</file>
+    <file>images/simulator/9X/9xdt-gr.png</file>
+    <file>images/simulator/9X/9xdb-or.png</file>
+    <file>images/simulator/9X/9xdl-or.png</file>
+    <file>images/simulator/9X/9xdr-or.png</file>
+    <file>images/simulator/9X/9xdt-or.png</file>
+    <file>images/simulator/9X/9xdb-yl.png</file>
+    <file>images/simulator/9X/9xdl-yl.png</file>
+    <file>images/simulator/9X/9xdr-yl.png</file>
+    <file>images/simulator/9X/9xdt-yl.png</file>
+    <file>images/simulator/9X/9xdb-rd.png</file>
+    <file>images/simulator/9X/9xdl-rd.png</file>
+    <file>images/simulator/9X/9xdr-rd.png</file>
+    <file>images/simulator/9X/9xdt-rd.png</file>
+    <file>images/simulator/9X/9xmenu.png</file>
+    <file>images/simulator/9X/9xmenumenu.png</file>
+    <file>images/simulator/9X/9xmenuexit.png</file>
+    <file>images/simulator/9X/9xcurs.png</file>
+    <file>images/simulator/9X/9xcursup.png</file>
+    <file>images/simulator/9X/9xcursplus.png</file>
+    <file>images/simulator/9X/9xcursmin.png</file>
+    <file>images/simulator/9X/9xcursdown.png</file>
+    <file>images/simulator/9X/9xcursphoto.png</file>
     <file>images/screenshot.png</file>
     <file>images/splash-9x.png</file>
     <file>images/splash-9xrpro.png</file>
@@ -47,18 +62,18 @@
     <file>images/maps.png</file>
     <file>images/track.png</file>
     <file>images/track0.png</file>
-    <file>images/x9b0.png</file>
-    <file>images/x9l0.png</file>
-    <file>images/x9l1.png</file>
-    <file>images/x9l2.png</file>
-    <file>images/x9l3.png</file>
-    <file>images/x9l4.png</file>
-    <file>images/x9r0.png</file>
-    <file>images/x9r1.png</file>
-    <file>images/x9r2.png</file>
-    <file>images/x9r3.png</file>
-    <file>images/x9s0.png</file>
-    <file>images/x9t0.png</file>
+    <file>images/simulator/Taranis/x9b0.png</file>
+    <file>images/simulator/Taranis/x9l0.png</file>
+    <file>images/simulator/Taranis/x9l1.png</file>
+    <file>images/simulator/Taranis/x9l2.png</file>
+    <file>images/simulator/Taranis/x9l3.png</file>
+    <file>images/simulator/Taranis/x9l4.png</file>
+    <file>images/simulator/Taranis/x9r0.png</file>
+    <file>images/simulator/Taranis/x9r1.png</file>
+    <file>images/simulator/Taranis/x9r2.png</file>
+    <file>images/simulator/Taranis/x9r3.png</file>
+    <file>images/simulator/Taranis/x9s0.png</file>
+    <file>images/simulator/Taranis/x9t0.png</file>
     <file>images/taranison.png</file>    
     <file>images/wizard/ailerons.png</file>
     <file>images/wizard/airbrakes.png</file>

companion/src/comparedialog.h

@@ -1,8 +1,7 @@
 #ifndef _COMPAREDIALOG_H
 #define _COMPAREDIALOG_H
 
-#include <QDialog>
-#include <QLabel>
+#include <QtWidgets>
 #include "multimodelprinter.h"
 
 namespace Ui {

companion/src/constants.h

@@ -11,7 +11,9 @@ enum BoardEnum {
   BOARD_AR9X,
   BOARD_TARANIS,
   BOARD_TARANIS_PLUS,
-  BOARD_TARANIS_X9E
+  BOARD_TARANIS_X9E,
+  BOARD_FLAMENCO,
+  BOARD_HORUS
 };
 
 #define C9X_MAX_MODELS            60
@@ -25,7 +27,7 @@ enum BoardEnum {
 #define C9X_MAX_GVARS             9
 #define C9X_MAX_ENCODERS          2
 #define C9X_NUM_CHNOUT            32 // number of real output channels
-#define C9X_NUM_CSW               32 // number of custom switches
+#define C9X_NUM_CSW               64 // number of custom switches
 #define C9X_MAX_CUSTOM_FUNCTIONS  64 // number of functions assigned to switches
 #define C9X_NUM_MODULES           2
 #define NUM_STICKS                4

companion/src/converteeprom.cpp

@@ -27,7 +27,7 @@ bool convertEEprom(const QString &sourceEEprom, const QString &destinationEEprom
 
   QSharedPointer<RadioData> radioData = QSharedPointer<RadioData>(new RadioData());
   std::bitset<NUM_ERRORS> errors((unsigned long long)LoadEeprom(*radioData, (uint8_t *)eeprom.data(), eeprom_size));
-  if (!errors.test(NO_ERROR)
+  if (!errors.test(ALL_OK)
     || !currentFirmware->saveEEPROM((uint8_t *)eeprom.data(), *radioData, variant, version)) {
     return false;
   }

companion/src/customizesplashdialog.h

@@ -1,8 +1,7 @@
 #ifndef CUSTOMIZESPLASHDIALOG_H
 #define CUSTOMIZESPLASHDIALOG_H
 
-#include <QtGui>
-#include <QDialog>
+#include <QtWidgets>
 #include "firmwareinterface.h"
 
 namespace Ui

companion/src/downloaddialog.cpp

@@ -1,7 +1,5 @@
 #include "downloaddialog.h"
 #include "ui_downloaddialog.h"
-#include <QMessageBox>
-#include <QtGui>
 #include <QTime>
 #include "helpers.h"
 

companion/src/downloaddialog.h

@@ -1,13 +1,12 @@
 #ifndef DOWNLOADDIALOG_H
 #define DOWNLOADDIALOG_H
 
-#include <QDialog>
+#include <QtWidgets>
 #include <QNetworkAccessManager>
 #include <QNetworkReply>
 #include <QNetworkRequest>
 #include <QFile>
 
-
 namespace Ui {
     class downloadDialog;
 }

companion/src/eeprominterface.cpp

@@ -1,6 +1,7 @@
 #include <stdio.h>
 #include <list>
 #include <float.h>
+#include <QtWidgets>
 #include "eeprominterface.h"
 #include "firmwares/er9x/er9xinterface.h"
 #include "firmwares/th9x/th9xinterface.h"
@@ -475,13 +476,6 @@ QString RawSource::toString(const ModelData * model) const
     QObject::tr("ACC"), QObject::tr("GPS Time"),
   };
 
-  static const QString logicalSwitches[] = {
-    QObject::tr("L1"), QObject::tr("L2"), QObject::tr("L3"), QObject::tr("L4"), QObject::tr("L5"), QObject::tr("L6"), QObject::tr("L7"), QObject::tr("L8"), QObject::tr("L9"), QObject::tr("L10"),
-    QObject::tr("L11"), QObject::tr("L12"), QObject::tr("L13"), QObject::tr("L14"), QObject::tr("L15"), QObject::tr("L16"), QObject::tr("L17"), QObject::tr("L18"), QObject::tr("L19"), QObject::tr("L20"),
-    QObject::tr("L21"), QObject::tr("L22"), QObject::tr("L23"), QObject::tr("L24"), QObject::tr("L25"), QObject::tr("L26"), QObject::tr("L27"), QObject::tr("L28"), QObject::tr("L29"), QObject::tr("L30"),
-    QObject::tr("L31"), QObject::tr("L32")
-  };
-
   if (index<0) {
     return QObject::tr("----");
   }
@@ -508,7 +502,7 @@ QString RawSource::toString(const ModelData * model) const
     case SOURCE_TYPE_SWITCH:
       return (IS_TARANIS(GetEepromInterface()->getBoard()) ? CHECK_IN_ARRAY(switchesX9D, index) : CHECK_IN_ARRAY(switches9X, index));
     case SOURCE_TYPE_CUSTOM_SWITCH:
-      return logicalSwitches[index];
+      return QObject::tr("L%1").arg(index+1);
     case SOURCE_TYPE_CYC:
       return QObject::tr("CYC%1").arg(index+1);
     case SOURCE_TYPE_PPM:
@@ -590,13 +584,6 @@ QString RawSwitch::toString() const
     SwitchUp('R'), QString::fromUtf8("SR-"), SwitchDn('R'),
   };
 
-  static const QString logicalSwitches[] = {
-    QObject::tr("L1"), QObject::tr("L2"), QObject::tr("L3"), QObject::tr("L4"), QObject::tr("L5"), QObject::tr("L6"), QObject::tr("L7"), QObject::tr("L8"), QObject::tr("L9"), QObject::tr("L10"),
-    QObject::tr("L11"), QObject::tr("L12"), QObject::tr("L13"), QObject::tr("L14"), QObject::tr("L15"), QObject::tr("L16"), QObject::tr("L17"), QObject::tr("L18"), QObject::tr("L19"), QObject::tr("L20"),
-    QObject::tr("L21"), QObject::tr("L22"), QObject::tr("L23"), QObject::tr("L24"), QObject::tr("L25"), QObject::tr("L26"), QObject::tr("L27"), QObject::tr("L28"), QObject::tr("L29"), QObject::tr("L30"),
-    QObject::tr("L31"), QObject::tr("L32")
-  };
-
   static const QString flightModes[] = {
     QObject::tr("FM0"), QObject::tr("FM1"), QObject::tr("FM2"), QObject::tr("FM3"), QObject::tr("FM4"), QObject::tr("FM5"), QObject::tr("FM6"), QObject::tr("FM7"), QObject::tr("FM8")
   };
@@ -634,7 +621,7 @@ QString RawSwitch::toString() const
         else
           return CHECK_IN_ARRAY(switches9X, index-1);
       case SWITCH_TYPE_VIRTUAL:
-        return CHECK_IN_ARRAY(logicalSwitches, index-1);
+        return QObject::tr("L%1").arg(index);
       case SWITCH_TYPE_MULTIPOS_POT:
         return CHECK_IN_ARRAY(multiposPots, index-1);
       case SWITCH_TYPE_TRIM:
@@ -1183,9 +1170,9 @@ GeneralSettings::GeneralSettings()
         byte8u=(uint8_t)t_CountrySet.mid(2,2).toUInt(&ok,16);
         if (ok)
           imperial=byte8u;
-        QString chars=t_CountrySet.mid(4,2);
-        ttsLanguage[0]=chars[0].toAscii();
-        ttsLanguage[1]=chars[1].toAscii();
+        QString chars = t_CountrySet.mid(4, 2);
+        ttsLanguage[0] = chars[0].toLatin1();
+        ttsLanguage[1] = chars[1].toLatin1();
       }
     }
   }
@@ -1538,7 +1525,7 @@ bool ModelData::isGVarLinked(int phaseIdx, int gvarIdx)
   return flightModeData[phaseIdx].gvars[gvarIdx] > 1024;
 }
 
-int ModelData::getGVarValue(int phaseIdx, int gvarIdx)
+int ModelData::getGVarFieldValue(int phaseIdx, int gvarIdx)
 {
   int idx = flightModeData[phaseIdx].gvars[gvarIdx];
   for (int i=0; idx>1024 && i<C9X_MAX_FLIGHT_MODES; i++) {
@@ -1699,7 +1686,7 @@ unsigned long LoadEeprom(RadioData &radioData, const uint8_t *eeprom, const int
 
   foreach(EEPROMInterface *eepromInterface, eepromInterfaces) {
     std::bitset<NUM_ERRORS> result((unsigned long long)eepromInterface->load(radioData, eeprom, size));
-    if (result.test(NO_ERROR)) {
+    if (result.test(ALL_OK)) {
       return result.to_ulong();
     }
     else {
@@ -1719,7 +1706,7 @@ unsigned long LoadBackup(RadioData & radioData, uint8_t * eeprom, int size, int
 
   foreach(EEPROMInterface *eepromInterface, eepromInterfaces) {
     std::bitset<NUM_ERRORS> result((unsigned long long)eepromInterface->loadBackup(radioData, eeprom, size, index));
-    if (result.test(NO_ERROR)) {
+    if (result.test(ALL_OK)) {
       return result.to_ulong();
     }
     else {
@@ -1740,7 +1727,7 @@ unsigned long LoadEepromXml(RadioData & radioData, QDomDocument & doc)
 
   foreach(EEPROMInterface *eepromInterface, eepromInterfaces) {
     std::bitset<NUM_ERRORS> result((unsigned long long)eepromInterface->loadxml(radioData, doc));
-    if (result.test(NO_ERROR)) {
+    if (result.test(ALL_OK)) {
       return result.to_ulong();
     }
     else {

companion/src/eeprominterface.h

@@ -21,7 +21,7 @@
 #include <QString>
 #include <QStringList>
 #include <QList>
-#include <QtXml>
+#include <QtXml> // This should be removed from here, and remove Xml dependency from all libs which don't need it.
 #include <QComboBox>
 #include <iostream>
 #include <bitset>
@@ -46,7 +46,10 @@ QString getBoardName(BoardEnum board);
 #define IS_TARANIS(board)      (board==BOARD_TARANIS  || board==BOARD_TARANIS_PLUS || board==BOARD_TARANIS_X9E)
 #define IS_TARANIS_PLUS(board) (board==BOARD_TARANIS_PLUS || board==BOARD_TARANIS_X9E)
 #define IS_TARANIS_X9E(board)  (board==BOARD_TARANIS_X9E)
-#define IS_ARM(board)          (IS_TARANIS(board) || IS_SKY9X(board))
+#define IS_HORUS(board)        (board==BOARD_HORUS)
+#define IS_FLAMENCO(board)     (board==BOARD_FLAMENCO)
+#define IS_STM32(board)        (IS_TARANIS(board) || IS_HORUS(board) || IS_FLAMENCO(board))
+#define IS_ARM(board)          (IS_STM32(board) || IS_SKY9X(board))
 
 const uint8_t modn12x3[4][4]= {
   {1, 2, 3, 4},
@@ -841,6 +844,7 @@ enum PulsesProtocol {
   PULSES_PXX_XJT_D8,
   PULSES_PXX_XJT_LR12,
   PULSES_PXX_DJT,
+  PULSES_CROSSFIRE,
   PULSES_PROTOCOL_LAST
 };
 
@@ -1076,7 +1080,7 @@ class ModelData {
     void setTrimValue(int phaseIdx, int trimIdx, int value);
 
     bool isGVarLinked(int phaseIdx, int gvarIdx);
-    int getGVarValue(int phaseIdx, int gvarIdx);
+    int getGVarFieldValue(int phaseIdx, int gvarIdx);
 
     ModelData removeGlobalVars();
 
@@ -1505,8 +1509,7 @@ void registerOpenTxFirmwares();
 void unregisterOpenTxFirmwares();
 
 enum EepromLoadErrors {
-  NO_ERROR,
-
+  ALL_OK,
   UNKNOWN_ERROR,
   UNSUPPORTED_NEWER_VERSION,
   WRONG_SIZE,

companion/src/file.cpp

@@ -36,7 +36,6 @@ eepromFatHeader(NULL)
 #define EEPROM_BLOCK_SIZE     (4*1024)
 #define EEPROM_MARK           0x84697771 /* thanks ;) */
 #define EEPROM_ZONE_SIZE      (8*1024)
-#define EEPROM_BUFFER_SIZE    256
 #define EEPROM_FAT_SIZE       128
 #define EEPROM_MAX_ZONES      (EEPROM_SIZE / EEPROM_ZONE_SIZE)
 #define EEPROM_MAX_FILES      (EEPROM_MAX_ZONES - 1)
@@ -237,6 +236,9 @@ void RleFile::EeFsSetDat(unsigned int blk, unsigned int ofs, const uint8_t *buf,
 
 unsigned int RleFile::EeFsGetFree()
 {
+  if (IS_HORUS(board))
+    return 0;
+
   unsigned int ret = 0;
   unsigned int i;
   if (IS_ARM(board))
@@ -256,6 +258,9 @@ unsigned int RleFile::EeFsGetFree()
  */
 void RleFile::EeFsFree(unsigned int blk)
 {
+  if (IS_HORUS(board))
+    return;
+
   unsigned int i = blk;
   while (EeFsGetLink(i)) i = EeFsGetLink(i);
   if (IS_ARM(board)) {
@@ -273,6 +278,8 @@ void RleFile::EeFsFree(unsigned int blk)
  */
 unsigned int RleFile::EeFsAlloc()
 {
+  if (IS_HORUS(board))
+    return 0;
   unsigned int ret = (IS_ARM(board) ? eeFsArm->freeList : eeFs->freeList);
   if (ret) {
     if (IS_ARM(board))
@@ -286,12 +293,18 @@ unsigned int RleFile::EeFsAlloc()
 
 unsigned int RleFile::size(unsigned int id)
 {
-  return IS_ARM(board) ? eeFsArm->files[id].size : eeFs->files[id].size;
+  if (IS_HORUS(board))
+    return 0;
+  else
+    return IS_ARM(board) ? eeFsArm->files[id].size : eeFs->files[id].size;
 }
 
 unsigned int RleFile::openRd(unsigned int i_fileId)
 {
-  if (IS_SKY9X(board)) {
+  if (IS_HORUS(board)) {
+    return 1;
+  }
+  else if (IS_SKY9X(board)) {
     if (eepromFatHeader) {
       m_fileId = eepromFatHeader->files[i_fileId].zoneIndex;
       if (eepromFatHeader->files[i_fileId].exists) {
@@ -325,6 +338,9 @@ unsigned int RleFile::openRd(unsigned int i_fileId)
 
 unsigned int RleFile::read(uint8_t *buf, unsigned int i_len)
 {
+  if (IS_HORUS(board))
+    return 0;
+
   unsigned int len = IS_ARM(board) ? eeFsArm->files[m_fileId].size : eeFs->files[m_fileId].size;
   len -= m_pos;
   if (i_len > len) i_len = len;
@@ -345,6 +361,9 @@ unsigned int RleFile::read(uint8_t *buf, unsigned int i_len)
 // G: Read runlength (RLE) compressed bytes into buf.
 unsigned int RleFile::readRlc12(uint8_t *buf, unsigned int i_len, bool rlc2)
 {
+  if (IS_HORUS(board))
+    return 0;
+
   memset(buf, 0, i_len);
 
   if (IS_SKY9X(board)) {
@@ -417,9 +436,11 @@ unsigned int importRlc(QByteArray & dst, QByteArray & src, unsigned int rlcVersi
   dst.resize(0);
 
   for( ; 1; ) {
-    for (int i=0; i<zeroes; i++)
-      dst.append((char)0);
-    zeroes = 0;
+    if (zeroes > 0) {
+      for (int i = 0; i < zeroes; i++)
+        dst.append((char) 0);
+      zeroes = 0;
+    }
 
     if (len == 0)
       return dst.size();
@@ -526,6 +547,9 @@ void RleFile::closeTrunc()
 
 unsigned int RleFile::writeRlc1(unsigned int i_fileId, unsigned int typ, const uint8_t *buf, unsigned int i_len)
 {
+  if (IS_HORUS(board))
+    return 0;
+
   create(i_fileId, typ);
   bool state0 = true;
   uint8_t cnt = 0;
@@ -572,6 +596,9 @@ unsigned int RleFile::writeRlc1(unsigned int i_fileId, unsigned int typ, const u
  */
 unsigned int RleFile::writeRlc2(unsigned int i_fileId, unsigned int typ, const uint8_t *buf, unsigned int i_len)
 {
+  if (IS_HORUS(board))
+    return 0;
+
   if (IS_SKY9X(board)) {
     openRd(i_fileId);
     if (eepromFatHeader) {

companion/src/firmwares/er9x/er9xinterface.cpp

@@ -114,7 +114,7 @@ unsigned long Er9xInterface::loadxml(RadioData &radioData, QDomDocument &doc)
     }
   }
   std::cout << "ok\n";
-  errors.set(NO_ERROR);
+  errors.set(ALL_OK);
   return errors.to_ulong();
 }
 
@@ -186,7 +186,7 @@ unsigned long Er9xInterface::load(RadioData &radioData, const uint8_t *eeprom, i
   }
 
   std::cout << "ok\n";
-  errors.set(NO_ERROR);
+  errors.set(ALL_OK);
   return errors.to_ulong();
 }
 
@@ -261,7 +261,7 @@ QDomElement Er9xInterface::getGeneralDataXML(QDomDocument * qdoc, Er9xGeneral *
 {
   QDomElement gd = qdoc->createElement("GENERAL_DATA");
   appendNumberElement(qdoc, &gd, "Version", tgen->myVers, true); // have to write value here
-  appendTextElement(qdoc, &gd, "Owner", QString::fromAscii(tgen->ownerName,sizeof(tgen->ownerName)).trimmed());
+  appendTextElement(qdoc, &gd, "Owner", QString::fromLatin1(tgen->ownerName,sizeof(tgen->ownerName)).trimmed());
   appendCDATAElement(qdoc, &gd, "Data", (const char *)tgen,sizeof(Er9xGeneral));
   return gd;
 }
@@ -271,7 +271,7 @@ QDomElement Er9xInterface::getModelDataXML(QDomDocument * qdoc, Er9xModelData *
   QDomElement md = qdoc->createElement("MODEL_DATA");
   md.setAttribute("number", modelNum);
   appendNumberElement(qdoc, &md, "Version", mdver, true); // have to write value here
-  appendTextElement(qdoc, &md, "Name", QString::fromAscii(tmod->name,sizeof(tmod->name)).trimmed());
+  appendTextElement(qdoc, &md, "Name", QString::fromLatin1(tmod->name,sizeof(tmod->name)).trimmed());
   appendCDATAElement(qdoc, &md, "Data", (const char *)tmod,sizeof(Er9xModelData));
   return md;
 }
@@ -289,7 +289,7 @@ bool Er9xInterface::loadGeneralDataXML(QDomDocument * qdoc, Er9xGeneral * tgen)
   while (!n.isNull()) {
     if (n.isCDATASection()) {
       QString ds = n.toCDATASection().data();
-      QByteArray ba = QByteArray::fromBase64(ds.toAscii());
+      QByteArray ba = QByteArray::fromBase64(ds.toLatin1());
       const char * data = ba.data();
       memcpy(tgen, data, sizeof(Er9xGeneral));
       break;
@@ -326,7 +326,7 @@ bool Er9xInterface::loadModelDataXML(QDomDocument * qdoc, Er9xModelData * tmod,
   while (!n.isNull()) {
     if (n.isCDATASection()) {
       QString ds = n.toCDATASection().data();
-      QByteArray ba = QByteArray::fromBase64(ds.toAscii());
+      QByteArray ba = QByteArray::fromBase64(ds.toLatin1());
       const char * data = ba.data();
       memcpy(tmod, data, sizeof(Er9xModelData));
       break;

companion/src/firmwares/er9x/simulator/er9xsimulator.cpp

@@ -172,8 +172,7 @@ bool Er9xSimulator::timer10ms()
 
 uint8_t * Er9xSimulator::getLcd()
 {
-#define GETLCD_IMPORT
-#include "simulatorimport.h"
+  return (::uint8_t *)simuLcdBuf;
 }
 
 bool Er9xSimulator::lcdChanged(bool & lightEnable)

companion/src/firmwares/er9x/simulator/er9xsimulator.h

@@ -54,8 +54,14 @@ class Er9xSimulator : public SimulatorInterface {
 
     virtual void sendTelemetry(uint8_t * data, unsigned int len) {};
 
+    virtual uint8_t getSensorInstance(uint16_t id, uint8_t defaultValue = 0) { return 0; };
+
+    virtual uint16_t getSensorRatio(uint16_t id) { return 0; };
+
     virtual void setTrainerInput(unsigned int inputNumber, int16_t value) {};
 
+    virtual void setLuaStateReloadPermanentScripts() {};
+
   protected:
 
     Er9xInterface * er9xInterface;

companion/src/firmwares/ersky9x/ersky9xinterface.cpp

@@ -152,7 +152,7 @@ unsigned long Ersky9xInterface::loadxml(RadioData &radioData, QDomDocument &doc)
     }
   }
   std::cout << "ok\n";
-  errors.set(NO_ERROR);
+  errors.set(ALL_OK);
   return errors.to_ulong();
 }
 
@@ -230,7 +230,7 @@ unsigned long Ersky9xInterface::load(RadioData &radioData, const uint8_t *eeprom
   }
 
   std::cout << "ok\n";
-  errors.set(NO_ERROR);
+  errors.set(ALL_OK);
   return errors.to_ulong();
 }
 
@@ -305,7 +305,7 @@ QDomElement Ersky9xInterface::getGeneralDataXML(QDomDocument * qdoc, Ersky9xGene
 {
   QDomElement gd = qdoc->createElement("GENERAL_DATA");
   appendNumberElement(qdoc, &gd, "Version", tgen->myVers, true); // have to write value here
-  appendTextElement(qdoc, &gd, "Owner", QString::fromAscii(tgen->ownerName,sizeof(tgen->ownerName)).trimmed());
+  appendTextElement(qdoc, &gd, "Owner", QString::fromLatin1(tgen->ownerName,sizeof(tgen->ownerName)).trimmed());
   appendCDATAElement(qdoc, &gd, "Data", (const char *)tgen,sizeof(Ersky9xGeneral));
   return gd;
 }
@@ -315,7 +315,7 @@ QDomElement Ersky9xInterface::getModelDataXML(QDomDocument * qdoc, Ersky9xModelD
   QDomElement md = qdoc->createElement("MODEL_DATA");
   md.setAttribute("number", modelNum);
   appendNumberElement(qdoc, &md, "Version", mdver, true); // have to write value here
-  appendTextElement(qdoc, &md, "Name", QString::fromAscii(tmod->name,sizeof(tmod->name)).trimmed());
+  appendTextElement(qdoc, &md, "Name", QString::fromLatin1(tmod->name,sizeof(tmod->name)).trimmed());
   appendCDATAElement(qdoc, &md, "Data", (const char *)tmod,sizeof(Ersky9xModelData_v11));
   return md;
 }
@@ -333,7 +333,7 @@ bool Ersky9xInterface::loadGeneralDataXML(QDomDocument * qdoc, Ersky9xGeneral *
   while (!n.isNull()) {
     if (n.isCDATASection()) {
       QString ds = n.toCDATASection().data();
-      QByteArray ba = QByteArray::fromBase64(ds.toAscii());
+      QByteArray ba = QByteArray::fromBase64(ds.toLatin1());
       const char * data = ba.data();
       memcpy(tgen, data, std::min((unsigned int)ba.size(), (unsigned int)sizeof(Ersky9xGeneral)));
       break;
@@ -373,7 +373,7 @@ bool Ersky9xInterface::loadModelDataXML(QDomDocument * qdoc, ModelData *model, i
   while (!n.isNull()) {
     if (n.isCDATASection()) {
       QString ds = n.toCDATASection().data();
-      QByteArray ba = QByteArray::fromBase64(ds.toAscii());
+      QByteArray ba = QByteArray::fromBase64(ds.toLatin1());
       const char * data = ba.data();
       memcpy(&ersky9xModel, data, std::min(ba.size(), (int)sizeof(ersky9xModel)));
       break;

companion/src/firmwares/ersky9x/simulator/ersky9xsimulator.cpp

@@ -194,8 +194,7 @@ bool Ersky9xSimulator::timer10ms()
 
 uint8_t * Ersky9xSimulator::getLcd()
 {
-#define GETLCD_IMPORT
-#include "simulatorimport.h"
+  return (::uint8_t *)simuLcdBuf;
 }
 
 bool Ersky9xSimulator::lcdChanged(bool & lightEnable)

companion/src/firmwares/ersky9x/simulator/ersky9xsimulator.h

@@ -54,8 +54,14 @@ class Ersky9xSimulator : public SimulatorInterface {
 
     virtual void sendTelemetry(uint8_t * data, unsigned int len) {};
 
+    virtual uint8_t getSensorInstance(uint16_t id, uint8_t defaultValue = 0) { return 0; };
+
+    virtual uint16_t getSensorRatio(uint16_t id) { return 0; };
+
     virtual void setTrainerInput(unsigned int inputNumber, int16_t value) {};
 
+    virtual void setLuaStateReloadPermanentScripts() {};
+
   protected:
 
     Ersky9xInterface * ersky9xInterface;

companion/src/firmwares/gruvin9x/gruvin9xinterface.cpp

@@ -207,7 +207,7 @@ unsigned long Gruvin9xInterface::load(RadioData &radioData, const uint8_t *eepro
   }
 
   std::cout << "ok\n";
-  errors.set(NO_ERROR);
+  errors.set(ALL_OK);
   return errors.to_ulong();
 }
 

companion/src/firmwares/opentx/opentxeeprom.cpp

@@ -22,12 +22,13 @@
 #define MAX_MIXERS(board, version)            (IS_ARM(board) ? 64 : 32)
 #define MAX_CHANNELS(board, version)          (IS_ARM(board) ? 32 : 16)
 #define MAX_EXPOS(board, version)             (IS_ARM(board) ? ((IS_TARANIS(board) && version >= 216) ? 64 : 32) : (IS_DBLRAM(board, version) ? 16 : 14))
-#define MAX_CUSTOM_SWITCHES(board, version)   (IS_ARM(board) ? 32 : ((IS_DBLEEPROM(board, version) && version<217) ? 15 : 12))
+#define MAX_LOGICAL_SWITCHES(board, version)  (IS_ARM(board) ? (version >= 218 ? 64 : 32) : ((IS_DBLEEPROM(board, version) && version<217) ? 15 : 12))
 #define MAX_CUSTOM_FUNCTIONS(board, version)  (IS_ARM(board) ? (version >= 216 ? 64 : 32) : (IS_DBLEEPROM(board, version) ? 24 : 16))
 #define MAX_CURVES(board, version)            (IS_ARM(board) ? ((IS_TARANIS(board) && version >= 216) ? 32 : 16) : 8)
 #define MAX_GVARS(board, version)             ((IS_ARM(board) && version >= 216) ? 9 : 5)
 #define MAX_SENSORS(board, version)           (32)
 #define NUM_PPM_INPUTS(board, version)        ((IS_ARM(board) && version >= 216) ? 16 : 8)
+#define ROTENC_COUNT(board, version)          (IS_ARM(board) ? ((IS_TARANIS(board) && version >= 218) ? 0 : 1) : (IS_2560(board) ? 2 : 0))
 
 #define IS_AFTER_RELEASE_21_MARCH_2013(board, version) (version >= 214 || (!IS_ARM(board) && version >= 213))
 #define IS_AFTER_RELEASE_23_MARCH_2013(board, version) (version >= 214 || (board==BOARD_STOCK && version >= 213))
@@ -100,7 +101,7 @@ class SwitchesConversionTable: public ConversionTable {
         }
       }
 
-      for (int i=1; i<=MAX_CUSTOM_SWITCHES(board, version); i++) {
+      for (int i=1; i<=MAX_LOGICAL_SWITCHES(board, version); i++) {
         addConversion(RawSwitch(SWITCH_TYPE_VIRTUAL, -i), -val+offset);
         addConversion(RawSwitch(SWITCH_TYPE_VIRTUAL, i), val++);
       }
@@ -125,7 +126,7 @@ class SwitchesConversionTable: public ConversionTable {
           addConversion(RawSwitch(SWITCH_TYPE_SWITCH, s), val++);
         }
 
-        for (int i=1; i<=MAX_CUSTOM_SWITCHES(board, version); i++) {
+        for (int i=1; i<=MAX_LOGICAL_SWITCHES(board, version); i++) {
           addConversion(RawSwitch(SWITCH_TYPE_VIRTUAL, i), val++);
         }
 
@@ -182,7 +183,7 @@ class SwitchesConversionTable: public ConversionTable {
       internalCache.push_back(element);
       return element.table;
     }
-    static void Cleanup() 
+    static void Cleanup()
     {
       for (std::list<Cache>::iterator it=internalCache.begin(); it!=internalCache.end(); it++) {
         Cache element = *it;
@@ -263,7 +264,7 @@ class SourcesConversionTable: public ConversionTable {
               addConversion(RawSource(SOURCE_TYPE_SWITCH, i), val++);
           }
         }
-        for (int i=0; i<MAX_CUSTOM_SWITCHES(board, version); i++) {
+        for (int i=0; i<MAX_LOGICAL_SWITCHES(board, version); i++) {
           addConversion(RawSource(SOURCE_TYPE_CUSTOM_SWITCH, i), val++);
         }
       }
@@ -369,7 +370,7 @@ class SourcesConversionTable: public ConversionTable {
       internalCache.push_back(element);
       return element.table;
     }
-    static void Cleanup() 
+    static void Cleanup()
     {
       for (std::list<Cache>::iterator it=internalCache.begin(); it!=internalCache.end(); it++) {
         Cache element = *it;
@@ -383,7 +384,7 @@ std::list<SourcesConversionTable::Cache> SourcesConversionTable::internalCache;
 
 void OpenTxEepromCleanup(void)
 {
-  SourcesConversionTable::Cleanup(); 
+  SourcesConversionTable::Cleanup();
   SwitchesConversionTable::Cleanup();
 }
 
@@ -391,8 +392,8 @@ template <int N>
 class SwitchField: public ConversionField< SignedField<N> > {
   public:
     SwitchField(RawSwitch & sw, BoardEnum board, unsigned int version, unsigned long flags=0):
-      ConversionField< SignedField<N> >(_switch, SwitchesConversionTable::getInstance(board, version, flags),  QObject::tr("Switch").toAscii(),
-          QObject::tr("Switch ").toAscii()+ sw.toString()+  QObject::tr(" cannot be exported on this board!").toAscii()),
+      ConversionField< SignedField<N> >(_switch, SwitchesConversionTable::getInstance(board, version, flags),  QObject::tr("Switch").toLatin1(),
+          QObject::tr("Switch ").toLatin1()+ sw.toString()+  QObject::tr(" cannot be exported on this board!").toLatin1()),
       sw(sw),
       _switch(0)
     {
@@ -407,14 +408,14 @@ class SwitchField: public ConversionField< SignedField<N> > {
       _switch = sw.toValue();
       ConversionField< SignedField<N> >::beforeExport();
     }
-    
+
     virtual void afterImport()
     {
-      ConversionField< SignedField<N> >::afterImport();	
+      ConversionField< SignedField<N> >::afterImport();
       sw = RawSwitch(_switch);
       eepromImportDebug() << QString("imported %1: %2").arg(ConversionField< SignedField<N> >::internalField.getName()).arg(sw.toString());
-    }    
-    
+    }
+
   protected:
     RawSwitch & sw;
     int _switch;
@@ -552,7 +553,7 @@ template <int N>
 class SourceField: public ConversionField< UnsignedField<N> > {
   public:
     SourceField(RawSource & source, BoardEnum board, unsigned int version, unsigned int variant, unsigned long flags=0):
-      ConversionField< UnsignedField<N> >(_source, SourcesConversionTable::getInstance(board, version, variant, flags), 
+      ConversionField< UnsignedField<N> >(_source, SourcesConversionTable::getInstance(board, version, variant, flags),
             "Source", QObject::tr("Source %1 cannot be exported on this board!").arg(source.toString())),
       source(source),
       _source(0)
@@ -568,13 +569,13 @@ class SourceField: public ConversionField< UnsignedField<N> > {
       _source = source.toValue();
       ConversionField< UnsignedField<N> >::beforeExport();
     }
-    
+
     virtual void afterImport()
     {
-      ConversionField< UnsignedField<N> >::afterImport();	
+      ConversionField< UnsignedField<N> >::afterImport();
       source = RawSource(_source);
       eepromImportDebug() << QString("imported %1: %2").arg(ConversionField< UnsignedField<N> >::internalField.getName()).arg(source.toString());
-    }    
+    }
 
   protected:
     RawSource & source;
@@ -783,7 +784,7 @@ class FlightModeField: public TransformedField {
       index(index),
       board(board),
       version(version),
-      rotencCount(IS_ARM(board) ? 1 : (IS_2560(board) ? 2 : 0))
+      rotencCount(ROTENC_COUNT(board, version))
     {
       if (board == BOARD_STOCK || (board==BOARD_M128 && version>=215)) {
         // On stock we use 10bits per trim
@@ -803,13 +804,21 @@ class FlightModeField: public TransformedField {
           internalField.Append(new SignedField<16>(trimBase[i]));
         }
       }
-
-      internalField.Append(new SwitchField<8>(phase.swtch, board, version));
-      if (HAS_LARGE_LCD(board))
-        internalField.Append(new ZCharField<10>(phase.name));
-      else
-        internalField.Append(new ZCharField<6>(phase.name));
-
+      if (IS_ARM(board) && version >= 218) {
+        if (HAS_LARGE_LCD(board))
+          internalField.Append(new ZCharField<10>(phase.name));
+        else
+          internalField.Append(new ZCharField<6>(phase.name));
+        internalField.Append(new SwitchField<9>(phase.swtch, board, version));
+        internalField.Append(new SpareBitsField<7>());
+      }
+      else {
+        internalField.Append(new SwitchField<8>(phase.swtch, board, version));
+        if (HAS_LARGE_LCD(board))
+          internalField.Append(new ZCharField<10>(phase.name));
+        else
+          internalField.Append(new ZCharField<6>(phase.name));
+      }
       if (IS_ARM(board) && version >= 214) {
         internalField.Append(new UnsignedField<8>(phase.fadeIn));
         internalField.Append(new UnsignedField<8>(phase.fadeOut));
@@ -922,7 +931,25 @@ class MixField: public TransformedField {
       version(version),
       model(model)
     {
-      if (IS_TARANIS(board) && version >= 217) {
+      if (IS_TARANIS(board) && version >= 218) {
+        internalField.Append(new SignedField<11>(_weight));
+        internalField.Append(new UnsignedField<5>(_destCh));
+        internalField.Append(new SourceField<10>(mix.srcRaw, board, version, FLAG_NOTELEMETRY));
+        internalField.Append(new UnsignedField<1>((unsigned int &)mix.carryTrim));
+        internalField.Append(new UnsignedField<2>(mix.mixWarn));
+        internalField.Append(new UnsignedField<2>((unsigned int &)mix.mltpx));
+        internalField.Append(new SpareBitsField<1>());
+        internalField.Append(new SignedField<14>(_offset));
+        internalField.Append(new SwitchField<9>(mix.swtch, board, version));
+        internalField.Append(new UnsignedField<9>(mix.flightModes));
+        internalField.Append(new CurveReferenceField(mix.curve, board, version));
+        internalField.Append(new UnsignedField<8>(mix.delayUp));
+        internalField.Append(new UnsignedField<8>(mix.delayDown));
+        internalField.Append(new UnsignedField<8>(mix.speedUp));
+        internalField.Append(new UnsignedField<8>(mix.speedDown));
+        internalField.Append(new ZCharField<8>(mix.name));
+      }
+      else if (IS_TARANIS(board) && version >= 217) {
         internalField.Append(new UnsignedField<8>(_destCh));
         internalField.Append(new UnsignedField<9>(mix.flightModes));
         internalField.Append(new UnsignedField<2>((unsigned int &)mix.mltpx));
@@ -1190,7 +1217,21 @@ class InputField: public TransformedField {
       board(board),
       version(version)
     {
-      if (IS_TARANIS(board) && version >= 217) {
+      if (IS_TARANIS(board) && version >= 218) {
+        internalField.Append(new UnsignedField<2>(expo.mode, "Mode"));
+        internalField.Append(new UnsignedField<14>(expo.scale, "Scale"));
+        internalField.Append(new SourceField<10>(expo.srcRaw, board, version, 0));
+        internalField.Append(new SignedField<6>(expo.carryTrim, "CarryTrim"));
+        internalField.Append(new UnsignedField<5>(expo.chn, "Channel"));
+        internalField.Append(new SwitchField<9>(expo.swtch, board, version));
+        internalField.Append(new UnsignedField<9>(expo.flightModes));
+        internalField.Append(new SignedField<8>(_weight, "Weight"));
+        internalField.Append(new SpareBitsField<1>());
+        internalField.Append(new ZCharField<8>(expo.name));
+        internalField.Append(new SignedField<8>(_offset, "Offset"));
+        internalField.Append(new CurveReferenceField(expo.curve, board, version));
+      }
+      else if (IS_TARANIS(board) && version >= 217) {
         internalField.Append(new SourceField<10>(expo.srcRaw, board, version, 0));
         internalField.Append(new UnsignedField<14>(expo.scale, "Scale"));
         internalField.Append(new UnsignedField<8>(expo.chn, "Channel"));
@@ -1424,7 +1465,13 @@ class CurvesField: public TransformedField {
       maxPoints(IS_ARM(board) ? 512 : 112-8)
     {
       for (int i=0; i<maxCurves; i++) {
-        if (IS_TARANIS(board) && version >= 216) {
+        if (IS_TARANIS(board) && version >= 218) {
+          internalField.Append(new UnsignedField<1>((unsigned int &)curves[i].type));
+          internalField.Append(new BoolField<1>(curves[i].smooth));
+          internalField.Append(new ConversionField< SignedField<6> >(curves[i].count, -5));
+          internalField.Append(new ZCharField<3>(curves[i].name));
+        }
+        else if (IS_TARANIS(board) && version >= 216) {
           internalField.Append(new UnsignedField<3>((unsigned int &)curves[i].type));
           internalField.Append(new BoolField<1>(curves[i].smooth));
           internalField.Append(new SpareBitsField<4>());
@@ -1581,7 +1628,7 @@ class AndSwitchesConversionTable: public ConversionTable {
     {
       int val=0;
       addConversion(RawSwitch(SWITCH_TYPE_NONE), val++);
-      
+
       if (IS_TARANIS(board)) {
         for (int i=1; i<=MAX_SWITCHES_POSITION(board, version); i++) {
           int s = switchIndex(i, board, version);
@@ -1595,7 +1642,7 @@ class AndSwitchesConversionTable: public ConversionTable {
           addConversion(RawSwitch(SWITCH_TYPE_SWITCH, -s), -val);
           addConversion(RawSwitch(SWITCH_TYPE_SWITCH, s), val++);
         }
-        for (int i=1; i<=MAX_CUSTOM_SWITCHES(board, version); i++) {
+        for (int i=1; i<=MAX_LOGICAL_SWITCHES(board, version); i++) {
           addConversion(RawSwitch(SWITCH_TYPE_VIRTUAL, -i), -val);
           addConversion(RawSwitch(SWITCH_TYPE_VIRTUAL, i), val++);
         }
@@ -1606,7 +1653,7 @@ class AndSwitchesConversionTable: public ConversionTable {
           addConversion(RawSwitch(SWITCH_TYPE_SWITCH, -s), -val);
           addConversion(RawSwitch(SWITCH_TYPE_SWITCH, s), val++);
         }
-        for (int i=1; i<=MAX_CUSTOM_SWITCHES(board, version); i++) {
+        for (int i=1; i<=MAX_LOGICAL_SWITCHES(board, version); i++) {
           addConversion(RawSwitch(SWITCH_TYPE_VIRTUAL, -i), -val);
           addConversion(RawSwitch(SWITCH_TYPE_VIRTUAL, i), val++);
         }
@@ -1671,7 +1718,16 @@ class LogicalSwitchField: public TransformedField {
       v2(0),
       v3(0)
     {
-      if (IS_ARM(board) && version >= 217) {
+      if (IS_ARM(board) && version >= 218) {
+        internalField.Append(new ConversionField< UnsignedField<8> >(csw.func, &functionsConversionTable, "Function"));
+        internalField.Append(new SignedField<10>(v1));
+        internalField.Append(new SignedField<10>(v3));
+        internalField.Append(new ConversionField< SignedField<9> >((int &)csw.andsw, andswitchesConversionTable, "AND switch"));
+        internalField.Append(new SpareBitsField<1>()); // TODO extra switch mode
+        internalField.Append(new SpareBitsField<2>());
+        internalField.Append(new SignedField<16>(v2));
+      }
+      else if (IS_ARM(board) && version >= 217) {
         internalField.Append(new ConversionField< UnsignedField<6> >(csw.func, &functionsConversionTable, "Function"));
         internalField.Append(new SignedField<10>(v1));
         internalField.Append(new SignedField<16>(v2));
@@ -1706,7 +1762,7 @@ class LogicalSwitchField: public TransformedField {
         int scale = (version >= 216 ? 0 : 5);
         internalField.Append(new ConversionField< UnsignedField<8> >(csw.delay, 0, scale));
         internalField.Append(new ConversionField< UnsignedField<8> >(csw.duration, 0, scale));
-        if (version >= 214) {
+        if (version >= 214 && version <= 217) {
           internalField.Append(new ConversionField< SignedField<8> >((int &)csw.andsw, andswitchesConversionTable, "AND switch"));
         }
       }
@@ -1717,7 +1773,7 @@ class LogicalSwitchField: public TransformedField {
       }
     }
 
-    ~LogicalSwitchField() 
+    ~LogicalSwitchField()
     {
       delete andswitchesConversionTable;
     }
@@ -2029,8 +2085,14 @@ class ArmCustomFunctionField: public TransformedField {
     {
       memset(_param, 0, sizeof(_param));
 
-      internalField.Append(new SwitchField<8>(fn.swtch, board, version));
-      internalField.Append(new ConversionField< UnsignedField<8> >(_func, &functionsConversionTable, "Function", ::QObject::tr("OpenTX on this board doesn't accept this function")));
+      if (version >= 218) {
+        internalField.Append(new SwitchField<9>(fn.swtch, board, version));
+        internalField.Append(new ConversionField< UnsignedField<7> >(_func, &functionsConversionTable, "Function", ::QObject::tr("OpenTX on this board doesn't accept this function")));
+      }
+      else {
+        internalField.Append(new SwitchField<8>(fn.swtch, board, version));
+        internalField.Append(new ConversionField< UnsignedField<8> >(_func, &functionsConversionTable, "Function", ::QObject::tr("OpenTX on this board doesn't accept this function")));
+      }
 
       if (IS_TARANIS(board) && version >= 216)
         internalField.Append(new CharField<8>(_param, false));
@@ -2057,7 +2119,7 @@ class ArmCustomFunctionField: public TransformedField {
       if (fn.swtch.type != SWITCH_TYPE_NONE) {
         _func = fn.func;
 
-        if (fn.func == FuncPlaySound || fn.func == FuncPlayPrompt || fn.func == FuncPlayValue || fn.func == FuncPlayHaptic)
+        if (fn.func == FuncPlaySound || fn.func == FuncPlayPrompt || fn.func == FuncPlayValue || fn.func == FuncPlayHaptic || (fn.func >= FuncAdjustGV1 && fn.func <= FuncAdjustGVLast))
           _active = (version >= 216 ? fn.repeatParam : (fn.repeatParam/5));
         else
           _active = (fn.enabled ? 1 : 0);
@@ -2153,7 +2215,7 @@ class ArmCustomFunctionField: public TransformedField {
     {
       fn.func = (AssignFunc)_func;
 
-      if (fn.func == FuncPlaySound || fn.func == FuncPlayPrompt || fn.func == FuncPlayValue || fn.func == FuncPlayHaptic)
+      if (fn.func == FuncPlaySound || fn.func == FuncPlayPrompt || fn.func == FuncPlayValue || fn.func == FuncPlayHaptic || (fn.func >= FuncAdjustGV1 && fn.func <= FuncAdjustGVLast))
         fn.repeatParam = (version >= 216 ? _active : (_active*5));
       else
         fn.enabled = (_active & 0x01);
@@ -2170,7 +2232,7 @@ class ArmCustomFunctionField: public TransformedField {
 
       if (fn.func >= FuncOverrideCH1 && fn.func <= FuncOverrideCH32) {
         fn.func = AssignFunc(fn.func + index);
-        fn.param = (int8_t)value;
+        fn.param = (int16_t)(uint16_t)value;
       }
       else if (fn.func >= FuncSetTimer1 && fn.func <= FuncSetTimer3) {
         fn.func = AssignFunc(fn.func + index);
@@ -2473,7 +2535,7 @@ class FrskyScreenField: public DataField {
         else
           numbers.Append(new SpareBitsField<4*8>());
       }
-      
+
       if (IS_TARANIS(board) && version >= 217) {
         script.Append(new CharField<8>(screen.body.script.filename));
         script.Append(new SpareBitsField<16*8>());
@@ -2822,7 +2884,7 @@ class SensorField: public TransformedField {
         _instance = sensor.formula;
         if (sensor.formula == SensorData::TELEM_FORMULA_CELL)
           _param = (sensor.source) + (sensor.index << 8);
-        else if (sensor.formula == SensorData::TELEM_FORMULA_ADD || sensor.formula == SensorData::TELEM_FORMULA_MULTIPLY || sensor.formula == SensorData::TELEM_FORMULA_MIN || sensor.formula == SensorData::TELEM_FORMULA_MAX)
+        else if (sensor.formula == SensorData::TELEM_FORMULA_ADD || sensor.formula == SensorData::TELEM_FORMULA_AVERAGE || sensor.formula == SensorData::TELEM_FORMULA_MULTIPLY || sensor.formula == SensorData::TELEM_FORMULA_MIN || sensor.formula == SensorData::TELEM_FORMULA_MAX)
           _param = ((uint8_t)sensor.sources[0]) + ((uint8_t)sensor.sources[1] << 8) + ((uint8_t)sensor.sources[2] << 16) + ((uint8_t)sensor.sources[3] << 24);
         else if (sensor.formula == SensorData::TELEM_FORMULA_DIST)
           _param = (sensor.gps) + (sensor.alt << 8);
@@ -2844,7 +2906,7 @@ class SensorField: public TransformedField {
         sensor.formula = _instance;
         if (sensor.formula == SensorData::TELEM_FORMULA_CELL)
           (sensor.source = _sources[0], sensor.index = _sources[1]);
-        else if (sensor.formula == SensorData::TELEM_FORMULA_ADD || sensor.formula == SensorData::TELEM_FORMULA_MULTIPLY || sensor.formula == SensorData::TELEM_FORMULA_MIN || sensor.formula == SensorData::TELEM_FORMULA_MAX)
+        else if (sensor.formula == SensorData::TELEM_FORMULA_ADD || sensor.formula == SensorData::TELEM_FORMULA_AVERAGE || sensor.formula == SensorData::TELEM_FORMULA_MULTIPLY || sensor.formula == SensorData::TELEM_FORMULA_MIN || sensor.formula == SensorData::TELEM_FORMULA_MAX)
           for (int i=0; i<4; ++i)
             sensor.sources[i] = _sources[i];
         else if (sensor.formula == SensorData::TELEM_FORMULA_DIST)
@@ -2905,8 +2967,21 @@ OpenTxModelData::OpenTxModelData(ModelData & modelData, BoardEnum board, unsigne
   }
 
   for (int i=0; i<MAX_TIMERS(board, version); i++) {
-    internalField.Append(new SwitchField<8>(modelData.timers[i].mode, board, version, true));
-    if (IS_ARM(board) && version >= 217) {
+    if (IS_ARM(board) && version >= 218) {
+      internalField.Append(new SwitchField<9>(modelData.timers[i].mode, board, version, true));
+      internalField.Append(new UnsignedField<23>(modelData.timers[i].val));
+      internalField.Append(new SignedField<24>(modelData.timers[i].pvalue));
+      internalField.Append(new UnsignedField<2>(modelData.timers[i].countdownBeep));
+      internalField.Append(new BoolField<1>(modelData.timers[i].minuteBeep));
+      internalField.Append(new UnsignedField<2>(modelData.timers[i].persistent));
+      internalField.Append(new SpareBitsField<3>());
+      if (IS_TARANIS(board))
+        internalField.Append(new ZCharField<8>(modelData.timers[i].name));
+      else
+        internalField.Append(new ZCharField<3>(modelData.timers[i].name));
+    }
+    else if (IS_ARM(board) && version >= 217) {
+      internalField.Append(new SwitchField<8>(modelData.timers[i].mode, board, version, true));
       internalField.Append(new UnsignedField<24>(modelData.timers[i].val));
       internalField.Append(new SignedField<24>(modelData.timers[i].pvalue));
       internalField.Append(new UnsignedField<2>(modelData.timers[i].countdownBeep));
@@ -2919,6 +2994,7 @@ OpenTxModelData::OpenTxModelData(ModelData & modelData, BoardEnum board, unsigne
         internalField.Append(new ZCharField<3>(modelData.timers[i].name));
     }
     else if ((IS_ARM(board) || IS_2560(board)) && version >= 216) {
+      internalField.Append(new SwitchField<8>(modelData.timers[i].mode, board, version, true));
       internalField.Append(new UnsignedField<16>(modelData.timers[i].val));
       internalField.Append(new UnsignedField<2>(modelData.timers[i].countdownBeep));
       internalField.Append(new BoolField<1>(modelData.timers[i].minuteBeep));
@@ -2927,6 +3003,7 @@ OpenTxModelData::OpenTxModelData(ModelData & modelData, BoardEnum board, unsigne
       internalField.Append(new SignedField<16>(modelData.timers[i].pvalue));
     }
     else if (afterrelease21March2013) {
+      internalField.Append(new SwitchField<8>(modelData.timers[i].mode, board, version, true));
       internalField.Append(new UnsignedField<12>(modelData.timers[i].val));
       internalField.Append(new BoolField<1>((bool &)modelData.timers[i].countdownBeep));
       internalField.Append(new BoolField<1>(modelData.timers[i].minuteBeep));
@@ -2940,6 +3017,7 @@ OpenTxModelData::OpenTxModelData(ModelData & modelData, BoardEnum board, unsigne
       }
     }
     else {
+      internalField.Append(new SwitchField<8>(modelData.timers[i].mode, board, version, true));
       internalField.Append(new UnsignedField<16>(modelData.timers[i].val));
       if (HAS_PERSISTENT_TIMERS(board)) {
         internalField.Append(new UnsignedField<1>(modelData.timers[i].persistent));
@@ -2999,7 +3077,7 @@ OpenTxModelData::OpenTxModelData(ModelData & modelData, BoardEnum board, unsigne
   for (int i=0; i<MAX_EXPOS(board, version); i++)
     internalField.Append(new InputField(modelData.expoData[i], board, version));
   internalField.Append(new CurvesField(modelData.curves, board, version));
-  for (int i=0; i<MAX_CUSTOM_SWITCHES(board, version); i++)
+  for (int i=0; i<MAX_LOGICAL_SWITCHES(board, version); i++)
     internalField.Append(new LogicalSwitchField(modelData.logicalSw[i], board, version, variant, &modelData));
   for (int i=0; i<MAX_CUSTOM_FUNCTIONS(board, version); i++) {
     if (IS_ARM(board))
@@ -3008,8 +3086,9 @@ OpenTxModelData::OpenTxModelData(ModelData & modelData, BoardEnum board, unsigne
       internalField.Append(new AvrCustomFunctionField(modelData.customFn[i], board, version, variant));
   }
   internalField.Append(new HeliField(modelData.swashRingData, board, version, variant));
-  for (int i=0; i<MAX_FLIGHT_MODES(board, version); i++)
+  for (int i=0; i<MAX_FLIGHT_MODES(board, version); i++) {
     internalField.Append(new FlightModeField(modelData.flightModeData[i], i, board, version));
+  }
 
   if (!IS_ARM(board) || version < 216) {
     internalField.Append(new SignedField<8>(modelData.moduleData[0].ppmFrameLength));
@@ -3120,7 +3199,7 @@ OpenTxModelData::OpenTxModelData(ModelData & modelData, BoardEnum board, unsigne
     }
   }
 
-  if (IS_TARANIS(board)) {
+  if (IS_TARANIS(board) && version < 218) {
     for (int i=0; i<MAX_CURVES(board, version); i++) {
       internalField.Append(new ZCharField<6>(modelData.curves[i].name));
     }
@@ -3148,13 +3227,13 @@ OpenTxModelData::OpenTxModelData(ModelData & modelData, BoardEnum board, unsigne
       }
     }
   }
-  
+
   if (IS_TARANIS(board) && version >= 216) {
     for (int i=0; i<32; i++) {
       internalField.Append(new ZCharField<4>(modelData.inputNames[i]));
     }
   }
-  
+
   if (IS_ARM(board) && version >= 217) {
     for (int i=0; i<8; i++) {
       if (i < MAX_POTS(board, version)+MAX_SLIDERS(board))
@@ -3176,7 +3255,7 @@ OpenTxModelData::OpenTxModelData(ModelData & modelData, BoardEnum board, unsigne
   if (IS_ARM(board) && version >= 216) {
     for (int i=0; i < MAX_POTS(board, version)+MAX_SLIDERS(board); i++) {
       internalField.Append(new SignedField<8>(modelData.potPosition[i]));
-    }    
+    }
   }
 
   if (IS_ARM(board) && version == 216) {
@@ -3296,8 +3375,9 @@ OpenTxGeneralData::OpenTxGeneralData(GeneralSettings & generalData, BoardEnum bo
   internalField.Append(new SignedField<8>(generalData.txVoltageCalibration));
   internalField.Append(new SignedField<8>(generalData.backlightMode));
 
-  for (int i=0; i<NUM_STICKS; i++)
+  for (int i=0; i<NUM_STICKS; i++) {
     internalField.Append(new SignedField<16>(generalData.trainer.calib[i]));
+  }
   for (int i=0; i<NUM_STICKS; i++) {
     internalField.Append(new UnsignedField<6>(generalData.trainer.mix[i].src));
     internalField.Append(new UnsignedField<2>(generalData.trainer.mix[i].mode));
@@ -3306,7 +3386,7 @@ OpenTxGeneralData::OpenTxGeneralData(GeneralSettings & generalData, BoardEnum bo
 
   internalField.Append(new UnsignedField<8>(generalData.view, 0, MAX_VIEWS(board)-1));
 
-  internalField.Append(new SpareBitsField<2>());
+  internalField.Append(new SpareBitsField<2>()); // TODO buzzerMode?
   internalField.Append(new BoolField<1>(generalData.fai));
   internalField.Append(new SignedField<2>((int &)generalData.beeperMode));
   internalField.Append(new BoolField<1>(generalData.flashBeep));
@@ -3323,13 +3403,18 @@ OpenTxGeneralData::OpenTxGeneralData(GeneralSettings & generalData, BoardEnum bo
   }
 
   internalField.Append(new UnsignedField<8>(generalData.inactivityTimer));
-  if (IS_9X(board) && version >= 215) {
-    internalField.Append(new UnsignedField<3>(generalData.mavbaud));
+  if (IS_9X(board)) {
+    if (version >= 215) {
+      internalField.Append(new UnsignedField<3>(generalData.mavbaud));
+    }
+    else {
+      internalField.Append(new SpareBitsField<1>());
+      internalField.Append(new BoolField<1>(generalData.minuteBeep));
+      internalField.Append(new BoolField<1>(generalData.preBeep));
+    }
   }
   else {
-    internalField.Append(new SpareBitsField<1>());
-    internalField.Append(new BoolField<1>(generalData.minuteBeep));
-    internalField.Append(new BoolField<1>(generalData.preBeep));
+    internalField.Append(new SpareBitsField<3>());
   }
   if (version >= 216 && IS_TARANIS(board))
     internalField.Append(new SignedField<3>(generalData.splashDuration));
@@ -3342,20 +3427,19 @@ OpenTxGeneralData::OpenTxGeneralData(GeneralSettings & generalData, BoardEnum bo
   if (IS_ARM(board))
     internalField.Append(new SignedField<8>(generalData.switchesDelay));
   else
-    internalField.Append(new SpareBitsField<8>());
+    internalField.Append(new SpareBitsField<8>()); // TODO blOffBright + blOnBright
 
   internalField.Append(new UnsignedField<8>(generalData.backlightDelay));
   internalField.Append(new UnsignedField<8>(generalData.templateSetup));
   internalField.Append(new SignedField<8>(generalData.PPM_Multiplier));
   internalField.Append(new SignedField<8>(generalData.hapticLength));
 
-  if (version < 216 || !IS_9X(board)) {
+  if (version < 216 || (version < 218 && !IS_9X(board)) || (!IS_9X(board) && !IS_TARANIS(board))) {
     internalField.Append(new UnsignedField<8>(generalData.reNavigation));
   }
 
   if (version >= 216 && !IS_TARANIS(board)) {
-    internalField.Append(new UnsignedField<4>(generalData.stickReverse));
-    internalField.Append(new SpareBitsField<4>());
+    internalField.Append(new UnsignedField<8>(generalData.stickReverse));
   }
 
   internalField.Append(new SignedField<3>(generalData.beeperLength));
@@ -3377,33 +3461,46 @@ OpenTxGeneralData::OpenTxGeneralData(GeneralSettings & generalData, BoardEnum bo
 
   if (IS_ARM(board)) {
     internalField.Append(new UnsignedField<8>(generalData.backlightBright));
-    internalField.Append(new SignedField<8>(generalData.txCurrentCalibration));
+    if (version < 218) internalField.Append(new SignedField<8>(generalData.txCurrentCalibration));
     if (version >= 213) {
-      internalField.Append(new SignedField<8>(generalData.temperatureWarn)); // TODO
-      internalField.Append(new UnsignedField<8>(generalData.mAhWarn));
-      internalField.Append(new UnsignedField<16>(generalData.mAhUsed));
+      if (version < 218) internalField.Append(new SignedField<8>(generalData.temperatureWarn)); // TODO
+      if (version < 218) internalField.Append(new UnsignedField<8>(generalData.mAhWarn));
+      if (version < 218) internalField.Append(new UnsignedField<16>(generalData.mAhUsed));
       internalField.Append(new UnsignedField<32>(generalData.globalTimer));
-      internalField.Append(new SignedField<8>(generalData.temperatureCalib)); // TODO
+      if (version < 218) internalField.Append(new SignedField<8>(generalData.temperatureCalib)); // TODO
       internalField.Append(new UnsignedField<8>(generalData.btBaudrate)); // TODO
-      internalField.Append(new BoolField<8>(generalData.optrexDisplay)); //TODO
-      internalField.Append(new UnsignedField<8>(generalData.sticksGain)); // TODO
+      if (version < 218) internalField.Append(new BoolField<8>(generalData.optrexDisplay)); //TODO
+      if (version < 218) internalField.Append(new UnsignedField<8>(generalData.sticksGain)); // TODO
     }
     if (version >= 214) {
-      internalField.Append(new UnsignedField<8>(generalData.rotarySteps)); // TODO
+      if (version < 218) internalField.Append(new UnsignedField<8>(generalData.rotarySteps)); // TODO
       internalField.Append(new UnsignedField<8>(generalData.countryCode));
       internalField.Append(new UnsignedField<8>(generalData.imperial));
     }
     if (version >= 215) {
       internalField.Append(new CharField<2>(generalData.ttsLanguage));
-      internalField.Append(new SignedField<8>(generalData.beepVolume));
-      internalField.Append(new SignedField<8>(generalData.wavVolume));
-      internalField.Append(new SignedField<8>(generalData.varioVolume));
+      if (version < 218) {
+        internalField.Append(new SignedField<8>(generalData.beepVolume));
+        internalField.Append(new SignedField<8>(generalData.wavVolume));
+        internalField.Append(new SignedField<8>(generalData.varioVolume));
+      }
+      else {
+        internalField.Append(new SignedField<4>(generalData.beepVolume));
+        internalField.Append(new SignedField<4>(generalData.wavVolume));
+        internalField.Append(new SignedField<4>(generalData.varioVolume));
+        internalField.Append(new SignedField<4>(generalData.backgroundVolume));
+      }
       if (version >= 216) {
         internalField.Append(new SignedField<8>(generalData.varioPitch));
         internalField.Append(new SignedField<8>(generalData.varioRange));
         internalField.Append(new SignedField<8>(generalData.varioRepeat));
       }
-      internalField.Append(new SignedField<8>(generalData.backgroundVolume));
+      if (version < 218) internalField.Append(new SignedField<8>(generalData.backgroundVolume));
+    }
+    if (version >= 218) {
+      for (int i=0; i<MAX_CUSTOM_FUNCTIONS(board, version); i++) {
+        internalField.Append(new ArmCustomFunctionField(generalData.customFn[i], board, version, variant));
+      }
     }
     if (IS_TARANIS(board) && version >= 216) {
       if (version >= 217) {
@@ -3429,11 +3526,11 @@ OpenTxGeneralData::OpenTxGeneralData(GeneralSettings & generalData, BoardEnum bo
     }
 
     if (IS_TARANIS_X9E(board))
-      internalField.Append(new SpareBitsField<64>());
+      internalField.Append(new SpareBitsField<64>()); // switchUnlockStates
     else if (IS_TARANIS(board))
-      internalField.Append(new SpareBitsField<16>());
-      
-    if (version >= 217) {
+      internalField.Append(new SpareBitsField<16>()); // switchUnlockStates
+
+    if (version == 217) {
       for (int i=0; i<MAX_CUSTOM_FUNCTIONS(board, version); i++) {
         internalField.Append(new ArmCustomFunctionField(generalData.customFn[i], board, version, variant));
       }

companion/src/firmwares/opentx/opentxeeprom.h

@@ -81,6 +81,9 @@ class ProtocolsConversionTable: public ConversionTable
         addConversion(PULSES_DSM2, val++);
         addConversion(PULSES_DSMX, val++);
       }
+      if (IS_TARANIS(board)) {
+    	addConversion(PULSES_CROSSFIRE, val++);
+      }
     }
 };
 

companion/src/firmwares/opentx/opentxinterface.cpp

@@ -23,8 +23,8 @@
 #include "file.h"
 #include "appdata.h"
 
-#define OPENTX_FIRMWARE_DOWNLOADS        "http://downloads-21.open-tx.org/firmware"
-#define OPENTX_NIGHT_FIRMWARE_DOWNLOADS  "http://downloads-21.open-tx.org/nightly/firmware"
+#define OPENTX_FIRMWARE_DOWNLOADS        "http://downloads-22.open-tx.org/firmware"
+#define OPENTX_NIGHT_FIRMWARE_DOWNLOADS  "http://downloads-22.open-tx.org/nightly/firmware"
 
 #define FILE_TYP_GENERAL 1
 #define FILE_TYP_MODEL   2
@@ -75,6 +75,10 @@ const char * OpenTxEepromInterface::getName()
       return "OpenTX for 9XR-PRO";
     case BOARD_AR9X:
       return "OpenTX for ar9x board / 9X";
+    case BOARD_FLAMENCO:
+      return "OpenTX for Flamenco experimental";
+    case BOARD_HORUS:
+      return "OpenTX for FrSky Horus";
     default:
       return "OpenTX for an unknown board";
   }
@@ -98,6 +102,8 @@ const int OpenTxEepromInterface::getEEpromSize()
     case BOARD_TARANIS:
     case BOARD_TARANIS_PLUS:
     case BOARD_TARANIS_X9E:
+    case BOARD_FLAMENCO:
+    case BOARD_HORUS:
       return EESIZE_TARANIS;
     default:
       return 0;
@@ -387,7 +393,7 @@ unsigned long OpenTxEepromInterface::load(RadioData &radioData, const uint8_t *e
     }
   }
   std::cout << " ok\n";
-  errors.set(NO_ERROR);
+  errors.set(ALL_OK);
   return errors.to_ulong();
 }
 
@@ -403,7 +409,9 @@ int OpenTxEepromInterface::save(uint8_t *eeprom, RadioData &radioData, uint32_t
       case BOARD_SKY9X:
       case BOARD_AR9X:
       case BOARD_9XRPRO:
-        version = 217;
+      case BOARD_FLAMENCO:
+      case BOARD_HORUS:
+        version = 218;
         break;
       case BOARD_GRUVIN9X:
       case BOARD_MEGA2560:
@@ -636,7 +644,7 @@ int OpenTxFirmware::getCapability(const Capability capability)
       return id.contains("nooverridech") ? 0 : 1;
     case LogicalSwitches:
       if (IS_ARM(board))
-        return 32;
+        return 64;
       else
         return 12;
     case CustomAndSwitches:
@@ -824,9 +832,9 @@ int OpenTxFirmware::isAvailable(PulsesProtocol proto, int port)
         switch (proto) {
           case PULSES_OFF:
           case PULSES_PXX_XJT_X16:
+          case PULSES_PXX_XJT_LR12:
             return 1;
           case PULSES_PXX_XJT_D8:
-          case PULSES_PXX_XJT_LR12:
             return id.contains("eu") ? 0 : 1;
           case PULSES_PPM:
             return id.contains("internalppm") ? 1 : 0;
@@ -845,6 +853,7 @@ int OpenTxFirmware::isAvailable(PulsesProtocol proto, int port)
           case PULSES_LP45:
           case PULSES_DSM2:
           case PULSES_DSMX:
+          case PULSES_CROSSFIRE:
             return 1;
           default:
             return 0;
@@ -955,16 +964,16 @@ EepromLoadErrors OpenTxEepromInterface::checkVersion(unsigned int version)
       // M128 revert because too much RAM used!
     case 216:
       // A lot of things (first github release)
-      return OLD_VERSION;
-      break;
     case 217:
       // 3 logical switches removed on M128 / gruvin9x boards
+      return OLD_VERSION;
+    case 218:
       break;
     default:
       return NOT_OPENTX;
   }
 
-  return NO_ERROR;
+  return ALL_OK;
 }
 
 bool OpenTxEepromInterface::checkVariant(unsigned int version, unsigned int variant)
@@ -1072,7 +1081,7 @@ unsigned long OpenTxEepromInterface::loadBackup(RadioData &radioData, uint8_t *e
   }
 
   std::cout << " ok\n";
-  errors.set(NO_ERROR);
+  errors.set(ALL_OK);
   return errors.to_ulong();
 }
 
@@ -1088,25 +1097,10 @@ QString OpenTxFirmware::getFirmwareBaseUrl()
 QString OpenTxFirmware::getFirmwareUrl()
 {
   QString url = getFirmwareBaseUrl();
-  switch (board) {
-    case BOARD_STOCK:
-    case BOARD_M128:
-    case BOARD_GRUVIN9X:
-    case BOARD_MEGA2560:
-      url.append(QString("/getfw.php?fw=%1.hex").arg(id));
-      break;
-    case BOARD_SKY9X:
-    case BOARD_AR9X:
-    case BOARD_9XRPRO:
-    case BOARD_TARANIS:
-    case BOARD_TARANIS_PLUS:
-    case BOARD_TARANIS_X9E:
-      url.append(QString("/getfw.php?fw=%1.bin").arg(id));
-      break;
-    default:
-      url.clear();
-      break;
-  }
+  if (IS_ARM(board))
+    url.append(QString("/getfw.php?fw=%1.bin").arg(id));
+  else
+    url.append(QString("/getfw.php?fw=%1.hex").arg(id));
   return url;
 }
 
@@ -1331,7 +1325,7 @@ void registerOpenTxFirmwares()
   firmware->addOption("nofp", QObject::tr("No flight modes"));
   firmware->addOption("nocurves", QObject::tr("Disable curves menus"));
   firmware->addOption("sdcard", QObject::tr("Support for SD memory card"));
-//firmware->addOption("audio", QObject::tr("Support for radio modified with regular speaker"));
+  firmware->addOption("audio", QObject::tr("Support for radio modified with regular speaker"));
 //firmware->addOption("voice", QObject::tr("Used if you have modified your radio with voice mode"));
   firmware->addOption("haptic", QObject::tr("Used if you have modified your radio with haptic mode"));
   firmware->addOption("ppmca", QObject::tr("PPM center adjustment in limits"));
@@ -1429,10 +1423,19 @@ void registerOpenTxFirmwares()
   /* Taranis X9E board */
   firmware = new OpenTxFirmware("opentx-taranisx9e", QObject::tr("FrSky Taranis X9E"), BOARD_TARANIS_X9E);
   firmware->addOption("shutdownconfirm", QObject::tr("Confirmation before radio shutdown"));
+  firmware->addOption("horussticks", QObject::tr("Horus magnetic sticks"));
   addOpenTxTaranisOptions(firmware);
   addOpenTxCommonOptions(firmware);
   firmwares.push_back(firmware);
 
+  /* Horus board */
+  firmware = new OpenTxFirmware("opentx-horus", QObject::tr("FrSky Horus"), BOARD_HORUS);
+  firmware->addOption("noheli", QObject::tr("Disable HELI menu and cyclic mix support"));
+  firmware->addOption("nogvars", QObject::tr("Disable Global variables"));
+  firmware->addOption("lua", QObject::tr("Support for Lua model scripts"));
+  addOpenTxCommonOptions(firmware);
+  firmwares.push_back(firmware);
+
   default_firmware_variant = GetFirmware("opentx-taranisplus-en");
   current_firmware_variant = default_firmware_variant;
 }

companion/src/firmwares/opentx/simulator/CMakeLists.txt

@@ -1,203 +0,0 @@
-set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR})
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR})
-
-set(RADIO_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/../../radio/src)
-
-add_custom_target(about_lbm_9x
-  make lbm PCB=9X
-  WORKING_DIRECTORY ${RADIO_SRC_DIRECTORY}
-)
-
-add_custom_target(about_lbm_taranis
-  make lbm PCB=TARANIS
-  WORKING_DIRECTORY ${RADIO_SRC_DIRECTORY}
-)
-
-add_custom_target(commondeps
-  make stamp_header tra
-  WORKING_DIRECTORY ${RADIO_SRC_DIRECTORY}
-)
-
-set_directory_properties(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES ${RADIO_SRC_DIRECTORY}/stamp-opentx.h)
-
-add_custom_target(lua_exports 
-  make PCB=TARANIS lua/lua_exports.inc
-  WORKING_DIRECTORY ${RADIO_SRC_DIRECTORY}
-)
-
-set(OPENTX_SRC_FILES
-  opentxsimulator.cpp
-)
-
-include_directories(
-  ${CMAKE_CURRENT_BINARY_DIR}
-  ${PROJECT_SOURCE_DIR}
-  ${PROJECT_SOURCE_DIR}/firmwares/opentx
-  ${RADIO_SRC_DIRECTORY}
-  ${RADIO_SRC_DIRECTORY}/fonts/std
-  ${RADIO_SRC_DIRECTORY}/lua/src
-  ${RADIO_SRC_DIRECTORY}/thirdparty
-  ${RADIO_SRC_DIRECTORY}/thirdparty/FatFs
-  ${RADIO_SRC_DIRECTORY}/thirdparty/FatFs/option
-  ${RADIO_SRC_DIRECTORY}/thirdparty/CoOS
-  ${RADIO_SRC_DIRECTORY}/thirdparty/Lua/src
-)
-
-if(APPLE)
-  # OS X compiler no longer automatically includes /Library/Frameworks in search path
-  set(CMAKE_SHARED_LINKER_FLAGS -F/Library/Frameworks)
-endif(APPLE)
-
-if(DEFINED TRANSLATIONS)
-  set(COMMON_DEFINITIONS ${COMMON_DEFINITIONS} TRANSLATIONS_${TRANSLATIONS})
-  string(TOLOWER ${TRANSLATIONS} TRANSLATION_SUFFIX)
-  set(SUFFIX ${SUFFIX}-${TRANSLATION_SUFFIX})
-endif()
-
-set(COMMON_DEFINITIONS
-  ${COMMON_DEFINITIONS}
-  SUFFIX="${SUFFIX}" 
-  HELI
-  GVARS
-  FLIGHT_MODES
-  PPM_CENTER_ADJUSTABLE
-  PPM_LIMITS_SYMETRICAL
-  OVERRIDE_CHANNEL_FUNCTION 
-  FAI_CHOICE
-)
-
-set(COMMON_LIBRARIES
-  ${QT_LIBRARIES}
-  ${PTHREAD_LIBRARY}
-  ${SDL_LIBRARY}
-)
-
-add_library(opentx-9x${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-9xr${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-9x128${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-9xr128${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-gruvin9x${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-mega2560${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-sky9x${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-9xrpro${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-ar9x${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-taranis${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-taranisplus${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-add_library(opentx-taranisx9e${SUFFIX}-simulator SHARED ${OPENTX_SRC_FILES})
-
-add_dependencies(opentx-9x${SUFFIX}-simulator about_lbm_9x commondeps)
-add_dependencies(opentx-9xr${SUFFIX}-simulator about_lbm_9x commondeps)
-add_dependencies(opentx-9x128${SUFFIX}-simulator about_lbm_9x commondeps)
-add_dependencies(opentx-9xr128${SUFFIX}-simulator about_lbm_9x commondeps)
-add_dependencies(opentx-gruvin9x${SUFFIX}-simulator about_lbm_9x commondeps)
-add_dependencies(opentx-mega2560${SUFFIX}-simulator about_lbm_9x commondeps)
-add_dependencies(opentx-sky9x${SUFFIX}-simulator about_lbm_9x commondeps)
-add_dependencies(opentx-9xrpro${SUFFIX}-simulator about_lbm_9x commondeps)
-add_dependencies(opentx-ar9x${SUFFIX}-simulator about_lbm_9x commondeps)
-add_dependencies(opentx-taranis${SUFFIX}-simulator about_lbm_taranis commondeps lua_exports)
-add_dependencies(opentx-taranisplus${SUFFIX}-simulator about_lbm_taranis commondeps lua_exports)
-add_dependencies(opentx-taranisx9e${SUFFIX}-simulator about_lbm_taranis commondeps lua_exports)
-
-set(OPENTX_LIBRARIES
-  opentx-9x${SUFFIX}-simulator
-  opentx-9xr${SUFFIX}-simulator
-  opentx-9x128${SUFFIX}-simulator
-  opentx-9xr128${SUFFIX}-simulator
-  opentx-gruvin9x${SUFFIX}-simulator
-  opentx-mega2560${SUFFIX}-simulator
-  opentx-sky9x${SUFFIX}-simulator
-  opentx-9xrpro${SUFFIX}-simulator
-  opentx-ar9x${SUFFIX}-simulator
-  opentx-taranis${SUFFIX}-simulator
-  opentx-taranisplus${SUFFIX}-simulator
-  opentx-taranisx9e${SUFFIX}-simulator
-)
-
-if(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
-  install(TARGETS ${OPENTX_LIBRARIES} LIBRARY DESTINATION ${SIMULATOR_LIB_PATH})
-endif(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
-
-# 9X with ATmega64
-target_include_directories(opentx-9x${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/stock)
-target_compile_definitions(opentx-9x${SUFFIX}-simulator PRIVATE PCBSTD PCB9X CPUM64 EEPROM_RLC ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-9x${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# 9XR with ATmega64
-target_include_directories(opentx-9xr${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/stock)
-target_compile_definitions(opentx-9xr${SUFFIX}-simulator PRIVATE PCBSTD PCB9XR CPUM64 EEPROM_RLC ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-9xr${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# 9X with ATmega128
-target_include_directories(opentx-9x128${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/stock)
-target_compile_definitions(opentx-9x128${SUFFIX}-simulator PRIVATE PCBSTD PCB9X CPUM128 EEPROM_RLC ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-9x128${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# 9XR with ATmega128
-target_include_directories(opentx-9xr128${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/stock)
-target_compile_definitions(opentx-9xr128${SUFFIX}-simulator PRIVATE PCBSTD PCB9XR CPUM128 EEPROM_RLC ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-9xr128${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# Gruvin9x
-target_include_directories(opentx-gruvin9x${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/gruvin9x)
-target_compile_definitions(opentx-gruvin9x${SUFFIX}-simulator PRIVATE PCBGRUVIN9X CPUM2560 EEPROM_RLC VOICE SDCARD ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-gruvin9x${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# Mega2560
-target_include_directories(opentx-mega2560${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/mega2560)
-target_compile_definitions(opentx-mega2560${SUFFIX}-simulator PRIVATE PCBMEGA2560 CPUM2560 EEPROM_RLC SDCARD ROTARY_ENCODERS=2 ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-mega2560${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# Sky9x
-target_include_directories(opentx-sky9x${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/sky9x)
-target_compile_definitions(opentx-sky9x${SUFFIX}-simulator PRIVATE PCBSKY9X CPUARM VOICE SDCARD ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-sky9x${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# 9XR-PRO
-target_include_directories(opentx-9xrpro${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/sky9x)
-target_compile_definitions(opentx-9xrpro${SUFFIX}-simulator PRIVATE PCBSKY9X REVX CPUARM VOICE SDCARD ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-9xrpro${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# AR9X
-target_include_directories(opentx-ar9x${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/sky9x)
-target_compile_definitions(opentx-ar9x${SUFFIX}-simulator PRIVATE PCBSKY9X AR9X CPUARM VOICE SDCARD ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-ar9x${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# Taranis standard
-target_include_directories(opentx-taranis${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/taranis)
-target_compile_definitions(opentx-taranis${SUFFIX}-simulator PRIVATE PCBTARANIS CPUARM CPUSTM32 EEPROM_RLC VOICE SDCARD ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-taranis${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# Taranis Plus 
-target_include_directories(opentx-taranisplus${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/taranis)
-target_compile_definitions(opentx-taranisplus${SUFFIX}-simulator PRIVATE PCBTARANIS REVPLUS CPUARM CPUSTM32 EEPROM_RLC VOICE SDCARD ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-taranisplus${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-# Taranis X9E
-target_include_directories(opentx-taranisx9e${SUFFIX}-simulator PRIVATE ${RADIO_SRC_DIRECTORY}/targets/taranis)
-target_compile_definitions(opentx-taranisx9e${SUFFIX}-simulator PRIVATE PCBTARANIS REVPLUS REV9E CPUARM CPUSTM32 STM32F40_41xxx EEPROM_RLC VOICE SDCARD ${COMMON_DEFINITIONS})
-target_link_libraries(opentx-taranisx9e${SUFFIX}-simulator PRIVATE ${COMMON_LIBRARIES})
-
-add_custom_target(opentx-simulators
-  DEPENDS ${OPENTX_LIBRARIES}
-)
-
-if(APPLE)
-  set(SIMULATOR_BUNDLES)
-  foreach(_file ${OPENTX_LIBRARIES})
-    set(SIMULATOR_BUNDLE "${_file}-bundle")
-    add_custom_target(${SIMULATOR_BUNDLE}
-      COMMAND install_name_tool -change /opt/local/Library/Frameworks/QtCore.framework/Versions/4/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/4/QtCore lib${_file}.dylib
-      COMMAND install_name_tool -change /opt/local/Library/Frameworks/QtNetwork.framework/Versions/4/QtNetwork @executable_path/../Frameworks/QtNetwork.framework/Versions/4/QtNetwork lib${_file}.dylib
-      COMMAND install_name_tool -change /opt/local/Library/Frameworks/QtXml.framework/Versions/4/QtXml @executable_path/../Frameworks/QtXml.framework/Versions/4/QtXml lib${_file}.dylib
-      COMMAND install_name_tool -change /opt/local/Library/Frameworks/QtGui.framework/Versions/4/QtGui @executable_path/../Frameworks/QtGui.framework/Versions/4/QtGui lib${_file}.dylib
-      COMMAND install_name_tool -change @rpath/SDL.framework/Versions/A/SDL @executable_path/../Frameworks/SDL.framework/Versions/A/SDL lib${_file}.dylib
-      WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-      COMMAND pwd
-      COMMAND cp lib${_file}.dylib companion.app/Contents/Resources/
-      DEPENDS ${_file}
-    )
-    list(APPEND SIMULATOR_BUNDLES ${SIMULATOR_BUNDLE})
-  endforeach()
-  add_custom_target(opentx-simulators-bundle DEPENDS ${SIMULATOR_BUNDLES})
-endif(APPLE)
-

companion/src/firmwares/opentx/simulator/opentxsimulator.cpp

@@ -1,542 +0,0 @@
-/*
- * Author - Bertrand Songis <bsongis@gmail.com>
- * 
- * Based on th9x -> http://code.google.com/p/th9x/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include "opentxsimulator.h"
-#include <QDebug>
-#include <stdio.h>
-#include <exception>
-#include <map>
-#include <string>
-
-#define COMPANION
-#define SIMU
-#define SIMU_EXCEPTIONS
-#define GUI
-#define SPLASH
-#define FRSKY
-#define FRSKY_HUB
-#define GPS
-#define VARIO
-#define GAUGES
-#define PPM_UNIT_PERCENT_PREC1
-#define AUDIO
-#define PXX
-#define DSM2
-#define DSM2_PPM
-#define DBLKEYS
-#define AUTOSWITCH
-#define GRAPHICS
-#define CURVES
-#if defined(PCBTARANIS)
-  #define RTCLOCK
-  #define XCURVES
-  #define VIRTUALINPUTS
-  #define LUA
-  #define LUA_MODEL_SCRIPTS
-  #define LUAINPUTS 
-#else
-  #define BUZZER
-  #define TEMPLATES
-#endif
-#define BOLD_FONT
-#define HAPTIC
-#define THRTRACE
-
-#if defined(CPUARM)
-#define TIMERS 3
-#else
-#define TIMERS 2
-#endif
-
-#if defined(PCBSKY9X) && !defined(REVX)
-  #define ROTARY_ENCODERS 1
-#elif defined(PCBGRUVIN9X)
-  #define ROTARY_ENCODERS 2
-#endif
-
-#if defined(CPUARM)
-  #define FRSKY_SPORT
-#endif
-
-#if defined (PCBTARANIS)
-  #define MIXERS_MONITOR
-#endif
-
-#undef min
-#undef max
-
-namespace NAMESPACE {
-
-#if defined(CPUARM)
-#include "radio/src/pulses/ppm_arm.cpp"
-#include "radio/src/pulses/pxx_arm.cpp"
-#include "radio/src/pulses/dsm2_arm.cpp"
-#include "radio/src/main_arm.cpp"
-#include "radio/src/pulses/pulses_arm.cpp"
-#include "radio/src/tasks_arm.cpp"
-#include "radio/src/audio_arm.cpp"
-#include "radio/src/telemetry/telemetry.cpp"
-#include "radio/src/telemetry/frsky_sport.cpp"
-#include "radio/src/sbus.cpp"
-#else
-#include "radio/src/main_avr.cpp"
-#include "radio/src/audio_avr.cpp"
-#include "radio/src/pulses/pulses_avr.cpp"
-#endif
-
-#include "radio/src/eeprom_common.cpp"
-#if defined(EEPROM_RLC)
-#include "radio/src/eeprom_rlc.cpp"
-#else
-#include "radio/src/eeprom_raw.cpp"
-#endif
-
-#if defined(PCBTARANIS) || defined(PCBSKY9X)
-#include "radio/src/eeprom_conversions.cpp"
-#endif
-
-#include "radio/src/opentx.cpp"
-#include "radio/src/debug.cpp"
-#include "radio/src/strhelpers.cpp"
-#include "radio/src/switches.cpp"
-#include "radio/src/functions.cpp"
-#include "radio/src/curves.cpp"
-#include "radio/src/mixer.cpp"
-#if defined(SDCARD)
-#include "radio/src/sdcard.cpp"
-#endif
-#include "radio/src/timers.cpp"
-#include "radio/src/stamp.cpp"
-#include "radio/src/maths.cpp"
-#include "radio/src/vario.cpp"
-#include "radio/src/trainer_input.cpp"
-
-#if defined(PCBTARANIS)
-#include "radio/src/bmp.cpp"
-#include "radio/src/gui/Taranis/fonts.cpp"
-#include "radio/src/gui/Taranis/widgets.cpp"
-#include "radio/src/gui/Taranis/navigation.cpp"
-#include "radio/src/gui/Taranis/popups.cpp"
-#include "radio/src/gui/Taranis/helpers.cpp"
-#include "radio/src/gui/Taranis/menus.cpp"
-#include "radio/src/gui/Taranis/menu_model.cpp"
-#include "radio/src/gui/Taranis/menu_model_select.cpp"
-#include "radio/src/gui/Taranis/menu_model_setup.cpp"
-#include "radio/src/gui/Taranis/menu_model_heli.cpp"
-#include "radio/src/gui/Taranis/menu_model_flightmodes.cpp"
-#include "radio/src/gui/Taranis/menu_model_inputs_mixes.cpp"
-#include "radio/src/gui/Taranis/menu_model_curves.cpp"
-#include "radio/src/gui/Taranis/menu_model_logical_switches.cpp"
-#include "radio/src/gui/Taranis/menu_model_custom_functions.cpp"
-#include "radio/src/gui/Taranis/menu_model_custom_scripts.cpp"
-#include "radio/src/gui/Taranis/menu_model_gvars.cpp"
-#include "radio/src/gui/Taranis/menu_model_limits.cpp"
-#include "radio/src/gui/Taranis/menu_model_telemetry.cpp"
-#include "radio/src/gui/Taranis/menu_general.cpp"
-#include "radio/src/gui/Taranis/menu_general_setup.cpp"
-#include "radio/src/gui/Taranis/menu_general_sdmanager.cpp"
-#include "radio/src/gui/Taranis/menu_general_trainer.cpp"
-#include "radio/src/gui/Taranis/menu_general_version.cpp"
-#include "radio/src/gui/Taranis/menu_general_diagkeys.cpp"
-#include "radio/src/gui/Taranis/menu_general_diaganas.cpp"
-#include "radio/src/gui/Taranis/menu_general_hardware.cpp"
-#include "radio/src/gui/Taranis/menu_general_calib.cpp"
-#include "radio/src/gui/Taranis/view_main.cpp"
-#include "radio/src/gui/Taranis/view_statistics.cpp"
-#include "radio/src/gui/Taranis/view_channels.cpp"
-#include "radio/src/gui/Taranis/view_telemetry.cpp"
-#include "radio/src/gui/Taranis/view_text.cpp"
-#include "radio/src/gui/Taranis/view_about.cpp"
-#include "radio/src/gui/Taranis/lcd.cpp"
-#include "radio/src/gui/Taranis/splash.cpp"
-#else
-#include "radio/src/gui/9X/fonts.cpp"
-#include "radio/src/gui/9X/widgets.cpp"
-#include "radio/src/gui/9X/navigation.cpp"
-#include "radio/src/gui/9X/popups.cpp"
-#include "radio/src/gui/9X/helpers.cpp"
-#include "radio/src/gui/9X/menus.cpp"
-#include "radio/src/gui/9X/menu_model.cpp"
-#include "radio/src/gui/9X/menu_model_select.cpp"
-#include "radio/src/gui/9X/menu_model_setup.cpp"
-#include "radio/src/gui/9X/menu_model_heli.cpp"
-#include "radio/src/gui/9X/menu_model_flightmodes.cpp"
-#include "radio/src/gui/9X/menu_model_inputs_mixes.cpp"
-#include "radio/src/gui/9X/menu_model_curves.cpp"
-#include "radio/src/gui/9X/menu_model_logical_switches.cpp"
-#include "radio/src/gui/9X/menu_model_custom_functions.cpp"
-#include "radio/src/gui/9X/menu_model_limits.cpp"
-#include "radio/src/gui/9X/menu_model_telemetry.cpp"
-#include "radio/src/gui/9X/menu_model_templates.cpp"
-#include "radio/src/gui/9X/menu_general.cpp"
-#include "radio/src/gui/9X/menu_general_setup.cpp"
-#if defined(SDCARD)
-#include "radio/src/gui/9X/menu_general_sdmanager.cpp"
-#include "radio/src/gui/9X/view_text.cpp"
-#endif
-#include "radio/src/gui/9X/menu_general_trainer.cpp"
-#include "radio/src/gui/9X/menu_general_version.cpp"
-#include "radio/src/gui/9X/menu_general_diagkeys.cpp"
-#include "radio/src/gui/9X/menu_general_diaganas.cpp"
-#if defined(CPUARM)
-#include "radio/src/gui/9X/menu_general_hardware.cpp"
-#endif
-#include "radio/src/gui/9X/menu_general_calib.cpp"
-#include "radio/src/gui/9X/view_main.cpp"
-#include "radio/src/gui/9X/view_statistics.cpp"
-#include "radio/src/gui/9X/view_telemetry.cpp"
-#if !defined(CPUM64)
-#include "radio/src/gui/9X/view_about.cpp"
-#endif
-#include "radio/src/gui/9X/lcd.cpp"
-#include "radio/src/gui/9X/splash.cpp"
-#endif
-
-#if !defined(VIRTUALINPUTS)
-#include "radio/src/templates.cpp"
-#endif
-
-#if defined(SDCARD)
-#include "radio/src/logs.cpp"
-#endif
-
-#if defined(RTCLOCK)
-#include "radio/src/rtc.cpp"
-#endif
-
-#if defined(BUZZER)
-#include "radio/src/buzzer.cpp"
-#endif
-
-#if defined(PCBTARANIS)
-#include "radio/src/targets/taranis/board_taranis.cpp"
-#include "radio/src/targets/taranis/keys_driver.cpp"
-#include "radio/src/targets/taranis/audio_driver.cpp"
-#include "radio/src/targets/taranis/telemetry_driver.cpp"
-#include "radio/src/targets/taranis/haptic_driver.cpp"
-#if defined(REV9E)
-#include "radio/src/targets/taranis/top_lcd_driver.cpp"
-#endif
-#include "radio/src/targets/taranis/pulses_driver.cpp"
-#include "radio/src/targets/taranis/rtc_driver.cpp"
-#include "radio/src/targets/taranis/trainer_driver.cpp"
-#include "radio/src/targets/taranis/serial2_driver.cpp"
-#elif defined(PCBSKY9X)
-#include "radio/src/targets/sky9x/board_sky9x.cpp"
-#include "radio/src/targets/sky9x/telemetry_driver.cpp"
-#include "radio/src/targets/sky9x/pwr_driver.cpp"
-#include "radio/src/targets/sky9x/eeprom_driver.cpp"
-#include "radio/src/targets/sky9x/keys_driver.cpp"
-#include "radio/src/targets/sky9x/audio_driver.cpp"
-#include "radio/src/targets/sky9x/sdcard_driver.cpp"
-#include "radio/src/targets/sky9x/coproc_driver.cpp"
-#include "radio/src/targets/sky9x/haptic_driver.cpp"
-#include "radio/src/targets/sky9x/serial2_driver.cpp"
-#include "radio/src/targets/sky9x/pulses_driver.cpp"
-#elif defined(PCBGRUVIN9X)
-#include "radio/src/targets/gruvin9x/board_gruvin9x.cpp"
-#include "radio/src/targets/gruvin9x/somo14d.cpp"
-#elif defined(PCBMEGA2560)
-#include "radio/src/targets/mega2560/board_mega2560.cpp"
-#else
-#include "radio/src/targets/stock/board_stock.cpp"
-#endif
-
-#include "radio/src/keys.cpp"
-#include "radio/src/haptic.cpp"
-#include "radio/src/targets/simu/simpgmspace.cpp"
-#include "radio/src/translations.cpp"
-#include "radio/src/telemetry/frsky.cpp"
-#if defined(CPUARM)
-  #include "radio/src/telemetry/frsky_d_arm.cpp"
-#else
-  #include "radio/src/telemetry/frsky_d.cpp"
-#endif
-#include "radio/src/translations/tts_en.cpp"
-
-#if defined(CPUARM)
-#include "radio/src/translations/tts_cz.cpp"
-#include "radio/src/translations/tts_de.cpp"
-#include "radio/src/translations/tts_es.cpp"
-#include "radio/src/translations/tts_fr.cpp"
-#include "radio/src/translations/tts_hu.cpp"
-#include "radio/src/translations/tts_it.cpp"
-#include "radio/src/translations/tts_nl.cpp"
-#include "radio/src/translations/tts_pl.cpp"
-#include "radio/src/translations/tts_pt.cpp"
-#include "radio/src/translations/tts_se.cpp"
-#include "radio/src/translations/tts_sk.cpp"
-#endif
-
-#if defined(LUA)
-#include "radio/src/lua/interface.cpp"
-#include "radio/src/lua/api_general.cpp"
-#include "radio/src/lua/api_lcd.cpp"
-#include "radio/src/lua/api_model.cpp"
-#include "radio/src/thirdparty/Lua/src/lapi.c"
-#include "radio/src/thirdparty/Lua/src/lcode.c"
-#include "radio/src/thirdparty/Lua/src/lctype.c"
-#include "radio/src/thirdparty/Lua/src/ldebug.c"
-#include "radio/src/thirdparty/Lua/src/ldo.c"
-#include "radio/src/thirdparty/Lua/src/ldump.c"
-#include "radio/src/thirdparty/Lua/src/lfunc.c"
-#include "radio/src/thirdparty/Lua/src/lgc.c"
-#include "radio/src/thirdparty/Lua/src/llex.c"
-#include "radio/src/thirdparty/Lua/src/lmem.c"
-#include "radio/src/thirdparty/Lua/src/lobject.c"
-#include "radio/src/thirdparty/Lua/src/lopcodes.c"
-#include "radio/src/thirdparty/Lua/src/lparser.c"
-#include "radio/src/thirdparty/Lua/src/lstate.c"
-#include "radio/src/thirdparty/Lua/src/lstring.c"
-#include "radio/src/thirdparty/Lua/src/ltable.c"
-#include "radio/src/thirdparty/Lua/src/lrotable.c"
-#include "radio/src/thirdparty/Lua/src/ltm.c"
-#include "radio/src/thirdparty/Lua/src/lundump.c"
-#include "radio/src/thirdparty/Lua/src/lvm.c"
-#include "radio/src/thirdparty/Lua/src/lzio.c"
-#include "radio/src/thirdparty/Lua/src/lbaselib.c"
-#include "radio/src/thirdparty/Lua/src/linit.c"
-#include "radio/src/thirdparty/Lua/src/lmathlib.c"
-#include "radio/src/thirdparty/Lua/src/lbitlib.c"
-#include "radio/src/thirdparty/Lua/src/loadlib.c"
-#include "radio/src/thirdparty/Lua/src/lauxlib.c"
-#include "radio/src/thirdparty/Lua/src/ltablib.c"
-#include "radio/src/thirdparty/Lua/src/lcorolib.c"
-#include "radio/src/thirdparty/Lua/src/liolib.c"
-#endif
-
-int16_t g_anas[NUM_STICKS+NUM_POTS];
-
-uint16_t anaIn(uint8_t chan)
-{
-    return g_anas[chan];
-}
-
-bool hasExtendedTrims()
-{
-  return g_model.extendedTrims;
-}
-
-uint8_t getStickMode()
-{
-  return limit<uint8_t>(0, g_eeGeneral.stickMode, 3);
-}
-
-#if defined(PCBTARANIS)
-void resetTrims()
-{
-  TRIMS_GPIO_REG_RVD |= TRIMS_GPIO_PIN_RVD;
-  TRIMS_GPIO_REG_RVU |= TRIMS_GPIO_PIN_RVU;
-  TRIMS_GPIO_REG_RHL |= TRIMS_GPIO_PIN_RHL;
-  TRIMS_GPIO_REG_RHR |= TRIMS_GPIO_PIN_RHR;
-  TRIMS_GPIO_REG_LVD |= TRIMS_GPIO_PIN_LVD;
-  TRIMS_GPIO_REG_LVU |= TRIMS_GPIO_PIN_LVU;
-  TRIMS_GPIO_REG_LHL |= TRIMS_GPIO_PIN_LHL;
-  TRIMS_GPIO_REG_LHR |= TRIMS_GPIO_PIN_LHR;
-}
-#endif
-
-void delay_01us(::uint16_t nb)
-{
-}
-
-OpenTxSimulator::OpenTxSimulator()
-{
-}
-
-void OpenTxSimulator::setSdPath(const QString &sdPath)
-{
-#if defined(SDCARD)
-  strncpy(simuSdDirectory, sdPath.toAscii().constData(), sizeof(simuSdDirectory)-1);
-  simuSdDirectory[sizeof(simuSdDirectory)-1] = '\0';
-#endif
-}
-
-void OpenTxSimulator::setVolumeGain(int value)
-{
-  volumeGain = value;
-}
-
-bool OpenTxSimulator::timer10ms()
-{
-#define TIMER10MS_IMPORT
-#include "simulatorimport.h"
-}
-
-::uint8_t * OpenTxSimulator::getLcd()
-{
-#define GETLCD_IMPORT
-#include "simulatorimport.h"
-}
-
-bool OpenTxSimulator::lcdChanged(bool & lightEnable)
-{
-#define LCDCHANGED_IMPORT
-#include "simulatorimport.h"
-}
-
-void OpenTxSimulator::start(QByteArray & eeprom, bool tests)
-{
-  memcpy(NAMESPACE::eeprom, eeprom.data(), std::min<int>(sizeof(NAMESPACE::eeprom), eeprom.size()));
-  start((const char *)0, tests);
-}
-
-void OpenTxSimulator::start(const char * filename, bool tests)
-{
-#if defined(PCBSKY9X) && !defined(REVX)
-  g_rotenc[0] = 0;
-#elif defined(PCBGRUVIN9X)
-  g_rotenc[0] = 0;
-  g_rotenc[1] = 0;
-#endif
-
-  StartEepromThread(filename);
-  StartAudioThread(volumeGain);
-  StartMainThread(tests);
-}
-
-void OpenTxSimulator::stop()
-{
-  StopMainThread();
-#if defined(CPUARM)  
-  StopAudioThread();
-#endif
-  StopEepromThread();
-}
-
-void OpenTxSimulator::getValues(TxOutputs &outputs)
-{
-#define GETVALUES_IMPORT
-#define g_chans512 channelOutputs
-#include "simulatorimport.h"
-#if defined(PCBSKY9X)
-  outputs.beep = g_beepCnt;
-  g_beepCnt = 0;
-#endif
-}
-
-void OpenTxSimulator::setValues(TxInputs &inputs)
-{
-#define SETVALUES_IMPORT
-#include "simulatorimport.h"
-}
-
-void OpenTxSimulator::setTrim(unsigned int idx, int value)
-{
-  idx = NAMESPACE::modn12x3[4*getStickMode() + idx];
-  ::uint8_t phase = getTrimFlightPhase(getFlightMode(), idx);
-  setTrimValue(phase, idx, value);
-}
-
-void OpenTxSimulator::getTrims(Trims & trims)
-{
-  ::uint8_t phase = getFlightMode();
-  trims.extended = hasExtendedTrims();
-  for (::uint8_t idx=0; idx<4; idx++) {
-    trims.values[idx] = getTrimValue(getTrimFlightPhase(phase, idx), idx);
-  }
-
-  for (int i=0; i<2; i++) {
-    ::uint8_t idx = NAMESPACE::modn12x3[4*getStickMode() + i];
-    ::int16_t tmp = trims.values[i];
-    trims.values[i] = trims.values[idx];
-    trims.values[idx] = tmp;
-  }
-}
-
-void OpenTxSimulator::wheelEvent(int steps)
-{
-#if defined(REV9E)
-  if (steps == 255)
-    x9de_rotenc -= 2;
-  else
-    x9de_rotenc += 2;
-#elif defined(PCBSKY9X) && !defined(REVX)
-  g_rotenc[0] += steps*4;
-#elif defined(PCBGRUVIN9X)
-  g_rotenc[0] += steps;
-#endif
-}
-
-unsigned int OpenTxSimulator::getPhase()
-{
-  return getFlightMode();
-}
-
-const char * OpenTxSimulator::getPhaseName(unsigned int phase)
-{
-  static char buff[sizeof(g_model.flightModeData[0].name)+1];
-  zchar2str(buff, g_model.flightModeData[phase].name, sizeof(g_model.flightModeData[0].name));
-  return buff;
-}
-
-const char * OpenTxSimulator::getError()
-{
-#define GETERROR_IMPORT
-#include "simulatorimport.h"
-}
-
-void OpenTxSimulator::sendTelemetry(::uint8_t * data, unsigned int len)
-{
-#if defined(FRSKY_SPORT)
-  processSportPacket(data);
-#endif
-}
-
-void OpenTxSimulator::setTrainerInput(unsigned int inputNumber, ::int16_t value)
-{
-#define SETTRAINER_IMPORT
-#include "simulatorimport.h"
-}
-
-void OpenTxSimulator::installTraceHook(void (*callback)(const char *))
-{
-  traceCallback = callback;
-}
-
-class OpenTxSimulatorFactory: public SimulatorFactory
-{
-  public:
-    OpenTxSimulatorFactory()
-    {
-    }
-
-    virtual SimulatorInterface *create()
-    {
-      return new OpenTxSimulator();
-    }
-
-    virtual QString name()
-    {
-      return QString("opentx-" FLAVOUR SUFFIX);
-    }
-
-    virtual BoardEnum type()
-    {
-#if defined(PCBTARANIS)
-      return BOARD_TARANIS;
-#else
-      return BOARD_STOCK;
-#endif
-    }
-};
-
-}
-
-extern "C" DLLEXPORT SimulatorFactory *registerSimu()
-{
-  return new NAMESPACE::OpenTxSimulatorFactory();
-}

companion/src/firmwares/th9x/simulator/th9xsimulator.cpp

@@ -175,8 +175,7 @@ bool Th9xSimulator::timer10ms()
 
 uint8_t * Th9xSimulator::getLcd()
 {
-#define GETLCD_IMPORT
-#include "simulatorimport.h"
+  return (::uint8_t *)simuLcdBuf;
 }
 
 bool Th9xSimulator::lcdChanged(bool & lightEnable)

companion/src/firmwares/th9x/th9xinterface.cpp

@@ -123,7 +123,7 @@ unsigned long Th9xInterface::load(RadioData &radioData, const uint8_t *eeprom, i
   }
 
   std::cout << "ok\n";
-  errors.set(NO_ERROR);
+  errors.set(ALL_OK);
   return errors.to_ulong();
 }
 

companion/src/flasheepromdialog.cpp

@@ -126,7 +126,7 @@ int FlashEEpromDialog::getEEpromVersion(const QString &filename)
     if (xmlOK) {
       RadioData * radioData = new RadioData();
       std::bitset<NUM_ERRORS> errors((unsigned long long)LoadEepromXml(*radioData, doc));
-      if (!errors.test(NO_ERROR)) {
+      if (!errors.test(ALL_OK)) {
         QMessageBox::warning(this, tr("Error"), tr("Invalid Models and Settings File %1").arg(filename));
       }
       else {
@@ -162,7 +162,7 @@ int FlashEEpromDialog::getEEpromVersion(const QString &filename)
 
   RadioData * radioData = new RadioData();
   std::bitset<NUM_ERRORS> errors((unsigned long long)LoadEeprom(*radioData, (const uint8_t *)eeprom.data(), eeprom_size));
-  if (eeprom_size == 0 || !errors.test(NO_ERROR)) {
+  if (eeprom_size == 0 || !errors.test(ALL_OK)) {
     QMessageBox::warning(this, tr("Error"), tr("Invalid Models and Settings file %1").arg(filename));
   }
   else {

companion/src/flasheepromdialog.h

@@ -1,7 +1,7 @@
 #ifndef FLASHEEPROMDIALOG_H_
 #define FLASHEEPROMDIALOG_H_
 
-#include <QDialog>
+#include <QtWidgets>
 
 #define ER9X_EEPROM_FILE_TYPE          "ER9X_EEPROM_FILE"
 #define EEPE_EEPROM_FILE_HEADER        "EEPE EEPROM FILE"

companion/src/flasheepromdialog.ui

@@ -110,7 +110,7 @@
       </sizepolicy>
      </property>
      <property name="toolTip">
-      <string>Allows Companion to write to older version of the firmware</string>
+      <string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Saves a dated copy of your eeprom to the backup folder you specified in the Companion settings before writing the current model to the radio.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
      </property>
      <property name="text">
       <string>Backup before Write</string>

companion/src/flashfirmwaredialog.cpp

@@ -203,7 +203,6 @@ void FlashFirmwareDialog::on_useLibrarySplash_clicked()
 void FlashFirmwareDialog::on_burnButton_clicked()
 {
   g.flashDir(QFileInfo(fwName).dir().absolutePath());
-  g.profile[g.id()].fwName(fwName);
   g.checkHardwareCompatibility(ui->checkHardwareCompatibility->isChecked());
   g.backupOnFlash(ui->backupEEprom->isChecked());
 

companion/src/flashfirmwaredialog.h

@@ -1,8 +1,7 @@
 #ifndef FLASH_FIRMWARE_DIALOG_H
 #define FLASH_FIRMWARE_DIALOG_H
 
-#include <QtGui>
-#include <QDialog>
+#include <QtWidgets>
 #include "eeprominterface.h"
 #include "firmwareinterface.h"
 #include "xmlinterface.h"

companion/src/generaledit/CMakeLists.txt

@@ -4,13 +4,15 @@ set(generaledit_NAMES
   generaledit
   generalsetup
   trainer
-  calibration
+  hardware
 )
 
 set(generaledit_SRCS
+  calibration.cpp
 )
 
 set(generaledit_HDRS
+  calibration.h
 )
 
 set(generaledit_UIS
@@ -22,7 +24,8 @@ foreach(name ${generaledit_NAMES})
   set(generaledit_UIS  ${generaledit_UIS}  ${name}.ui)
 endforeach()
  
-qt4_wrap_ui(generaledit_SRCS ${generaledit_UIS})
-qt4_wrap_cpp(generaledit_SRCS ${generaledit_HDRS})
+qt5_wrap_ui(generaledit_SRCS ${generaledit_UIS})
+qt5_wrap_cpp(generaledit_SRCS ${generaledit_HDRS})
 
-add_library(generaledit ${generaledit_SRCS})
+add_library(generaledit ${generaledit_SRCS})
+qt5_use_modules(generaledit Widgets Xml Multimedia)

companion/src/generaledit/calibration.cpp

@@ -1,429 +1,90 @@
+#include <QVBoxLayout>
+#include <QHeaderView>
+#include <QSpinBox>
 #include "calibration.h"
-#include "ui_calibration.h"
 
-void CalibrationPanel::setupSwitchConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type, bool threePos = true)
-{
-  bool enabled = false;
-
-  if (IS_TARANIS(firmware->getBoard())) {
-    if (IS_TARANIS_X9E(firmware->getBoard())) {
-      enabled = true;
-      type->addItem(tr("None"), GeneralSettings::SWITCH_NONE);
-    }
-    else if (index < 8) {
-      enabled = true;
-    }
-  }
-
-  if (enabled) {
-    type->addItem(tr("2 Positions Toggle"), GeneralSettings::SWITCH_TOGGLE);
-    type->addItem(tr("2 Positions"), GeneralSettings::SWITCH_2POS);
-    if (threePos) type->addItem(tr("3 Positions"), GeneralSettings::SWITCH_3POS);
-    name->setField(generalSettings.switchName[index], 3, this);
-    type->setField(generalSettings.switchConfig[index], this);
-  }
-  else {
-    label->hide();
-    name->hide();
-    type->hide();
-  }
-}
-
-void CalibrationPanel::setupPotConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type)
-{
-  bool enabled = false;
-
-  if (IS_TARANIS_X9E(firmware->getBoard()) && index < 4) {
-    label->setText(RawSource(SOURCE_TYPE_STICK, index+NUM_STICKS).toString());
-    enabled = true;
-  }
-  else if (IS_TARANIS_PLUS(firmware->getBoard()) && index < 3) {
-    enabled = true;
-  }
-  else if (IS_TARANIS(firmware->getBoard()) && index < 2) {
-    enabled = true;
-  }
-
-  if (enabled) {
-    type->addItem(tr("None"), GeneralSettings::POT_NONE);
-    type->addItem(tr("Pot with detent"), GeneralSettings::POT_WITH_DETENT);
-    type->addItem(tr("Multipos switch"), GeneralSettings::POT_MULTIPOS_SWITCH);
-    type->addItem(tr("Pot without detent"), GeneralSettings::POT_WITHOUT_DETENT);
-    name->setField(generalSettings.potName[index], 3, this);
-    type->setField(generalSettings.potConfig[index], this);
-  }
-  else {
-    label->hide();
-    name->hide();
-    type->hide();
-  }
-}
-
-void CalibrationPanel::setupSliderConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type)
-{
-  bool enabled = false;
-
-  if (IS_TARANIS(firmware->getBoard()) && index < 2) {
-    type->setEnabled(false);
-    enabled = true;
-  }
-  else if (IS_TARANIS_X9E(firmware->getBoard()) && index < 4) {
-    enabled = true;
-  }
-
-  if (IS_TARANIS_X9E(firmware->getBoard())) {
-    label->setText(RawSource(SOURCE_TYPE_STICK, index+NUM_STICKS+4).toString());
-  }
-
-  if (enabled) {
-    type->addItem(tr("None"), GeneralSettings::SLIDER_NONE);
-    type->addItem(tr("Slider with detent"), GeneralSettings::SLIDER_WITH_DETENT);
-    name->setField(generalSettings.sliderName[index], 3, this);
-    type->setField(generalSettings.sliderConfig[index], this);
-  }
-  else {
-    label->hide();
-    name->hide();
-    type->hide();
-  }
-}
 
 CalibrationPanel::CalibrationPanel(QWidget * parent, GeneralSettings & generalSettings, Firmware * firmware):
-  GeneralPanel(parent, generalSettings, firmware),
-  ui(new Ui::Calibration)
+  GeneralPanel(parent, generalSettings, firmware)
 {
-  ui->setupUi(this);
 
-  if (!firmware->getCapability(MultiposPots)) {
-    ui->potsTypeSeparator->hide();
+  tableWidget = new QTableWidget();
+  QVBoxLayout * layout = new QVBoxLayout();
+  layout->addWidget(tableWidget);
+  layout->setContentsMargins(0, 0, 0, 0);
+  this->setLayout(layout);
+
+  tableWidget->verticalHeader()->setSectionResizeMode(QHeaderView::ResizeToContents);
+  tableWidget->setColumnCount(3);
+  tableWidget->setShowGrid(false);
+  tableWidget->setSelectionMode(QAbstractItemView::NoSelection);
+  tableWidget->setFrameStyle(QFrame::NoFrame | QFrame::Plain);
+  tableWidget->setStyleSheet("QTableWidget {background-color: transparent;}");
+  QStringList headerLabels;
+  headerLabels << QObject::tr("Negative span") << QObject::tr("Mid value") << QObject::tr("Positive span"); 
+  tableWidget->setHorizontalHeaderLabels(headerLabels);
+
+  int rows = NUM_STICKS + GetCurrentFirmware()->getCapability(Pots) + GetCurrentFirmware()->getCapability(Sliders);
+  tableWidget->setRowCount(rows);
+
+  for(int i = 0; i < rows; ++i) {
+
+    QTableWidgetItem *newItem = new QTableWidgetItem(AnalogString(i));
+    newItem->setTextAlignment(Qt::AlignLeft);
+    tableWidget->setVerticalHeaderItem(i, newItem);
+
+    for(int j = 0; j < 3; ++j) {
+      QSpinBox * newItem = new QSpinBox();
+      newItem->setMinimum(-9999);
+      newItem->setMaximum(9999);
+      newItem->setSingleStep(1);
+      newItem->setValue(getCalibrationValue(i, j));
+      newItem->setProperty("row", i);
+      newItem->setProperty("column", j);
+      tableWidget->setCellWidget(i, j, newItem);
+      connect(newItem, SIGNAL(valueChanged(int)), this, SLOT(onCellChanged(int)));
+    }
   }
-
-  if (IS_TARANIS(firmware->getBoard())) {
-    ui->rudName->setField(generalSettings.stickName[0], 3, this);
-    ui->eleName->setField(generalSettings.stickName[1], 3, this);
-    ui->thrName->setField(generalSettings.stickName[2], 3, this);
-    ui->ailName->setField(generalSettings.stickName[3], 3, this);
-  }
-  else {
-    ui->rudLabel->hide();
-    ui->rudName->hide();
-    ui->eleLabel->hide();
-    ui->eleName->hide();
-    ui->thrLabel->hide();
-    ui->thrName->hide();
-    ui->ailLabel->hide();
-    ui->ailName->hide();
-  }
-
-  setupPotConfig(0, ui->pot1Label, ui->pot1Name, ui->pot1Type);
-  setupPotConfig(1, ui->pot2Label, ui->pot2Name, ui->pot2Type);
-  setupPotConfig(2, ui->pot3Label, ui->pot3Name, ui->pot3Type);
-  setupPotConfig(3, ui->pot4Label, ui->pot4Name, ui->pot4Type);
-
-  setupSliderConfig(0, ui->lsLabel, ui->lsName, ui->lsType);
-  setupSliderConfig(1, ui->rsLabel, ui->rsName, ui->rsType);
-  setupSliderConfig(2, ui->ls2Label, ui->ls2Name, ui->ls2Type);
-  setupSliderConfig(3, ui->rs2Label, ui->rs2Name, ui->rs2Type);
-
-  setupSwitchConfig(0, ui->saLabel, ui->saName, ui->saType);
-  setupSwitchConfig(1, ui->sbLabel, ui->sbName, ui->sbType);
-  setupSwitchConfig(2, ui->scLabel, ui->scName, ui->scType);
-  setupSwitchConfig(3, ui->sdLabel, ui->sdName, ui->sdType);
-  setupSwitchConfig(4, ui->seLabel, ui->seName, ui->seType);
-  setupSwitchConfig(5, ui->sfLabel, ui->sfName, ui->sfType, false);   //switch does not support 3POS
-  setupSwitchConfig(6, ui->sgLabel, ui->sgName, ui->sgType);
-  setupSwitchConfig(7, ui->shLabel, ui->shName, ui->shType, false);   //switch does not support 3POS
-  setupSwitchConfig(8, ui->siLabel, ui->siName, ui->siType);
-  setupSwitchConfig(9, ui->sjLabel, ui->sjName, ui->sjType);
-  setupSwitchConfig(10, ui->skLabel, ui->skName, ui->skType);
-  setupSwitchConfig(11, ui->slLabel, ui->slName, ui->slType);
-  setupSwitchConfig(12, ui->smLabel, ui->smName, ui->smType);
-  setupSwitchConfig(13, ui->snLabel, ui->snName, ui->snType);
-  setupSwitchConfig(14, ui->soLabel, ui->soName, ui->soType);
-  setupSwitchConfig(15, ui->spLabel, ui->spName, ui->spType);
-  setupSwitchConfig(16, ui->sqLabel, ui->sqName, ui->sqType);
-  setupSwitchConfig(17, ui->srLabel, ui->srName, ui->srType);
-
-  int potsCount = GetCurrentFirmware()->getCapability(Pots);
-  if (potsCount == 3) {
-    ui->ana8Neg->hide();
-    ui->ana8Mid->hide();
-    ui->ana8Pos->hide();
-  }
-
-  if (IS_TARANIS(firmware->getBoard())) {
-    ui->serialPortMode->setCurrentIndex(generalSettings.hw_uartMode);
-  }
-  else {
-    ui->serialPortMode->hide();
-    ui->serialPortLabel->hide();
-  }
-
-  if (!IS_SKY9X(firmware->getBoard())) {
-    ui->txCurrentCalibration->hide();
-    ui->txCurrentCalibrationLabel->hide();
-  }
-
-  if (IS_TARANIS_X9E(firmware->getBoard())) {
-    ui->bluetoothEnable->setChecked(generalSettings.bluetoothEnable);
-    ui->bluetoothName->setField(generalSettings.bluetoothName, 10, this);
-  }
-  else {
-    ui->bluetoothLabel->hide();
-    ui->bluetoothEnable->hide();
-    ui->bluetoothName->hide();
-  }
-
   disableMouseScrolling();
-
-  setValues();
 }
 
-CalibrationPanel::~CalibrationPanel()
+void CalibrationPanel::onCellChanged(int value)
 {
-  delete ui;
-}
+  QSpinBox * sb = qobject_cast<QSpinBox*>(sender());
+  int row = sb->property("row").toInt();
+  int column = sb->property("column").toInt();
 
-/*void CalibrationPanel::update()
+  if (value != getCalibrationValue(row, column)) {
+    setCalibrationValue(row,column, value);
+    qDebug() << "CalibrationPanel::onCellChanged" << row << column << "to" << value;
+    emit modified();
+  }
+}
+    
+int CalibrationPanel::getCalibrationValue(int row, int column)
 {
+  switch(column) {
+    case 0:
+      return generalSettings.calibSpanNeg[row];
+    case 1:
+      return generalSettings.calibMid[row];
+    case 2:
+      return generalSettings.calibSpanPos[row];
+  }
+  return 0;
 }
-*/
-void CalibrationPanel::on_PPM_MultiplierDSB_editingFinished()
+
+void CalibrationPanel::setCalibrationValue(int row, int column, int value)
 {
-  generalSettings.PPM_Multiplier = (int)(ui->PPM_MultiplierDSB->value()*10)-10;
-  emit modified();
-}
-
-void CalibrationPanel::on_PPM1_editingFinished()
-{
-  generalSettings.trainer.calib[0] = ui->PPM1->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_PPM2_editingFinished()
-{
-  generalSettings.trainer.calib[1] = ui->PPM2->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_PPM3_editingFinished()
-{
-  generalSettings.trainer.calib[2] = ui->PPM3->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_PPM4_editingFinished()
-{
-  generalSettings.trainer.calib[3] = ui->PPM4->value();
-  emit modified();
-}
-
-
-void CalibrationPanel::on_txCurrentCalibration_editingFinished()
-{
-  generalSettings.txCurrentCalibration = ui->txCurrentCalibration->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_bluetoothEnable_stateChanged(int)
-{
-  generalSettings.bluetoothEnable = ui->bluetoothEnable->isChecked();
-  emit modified();
-}
-
-void CalibrationPanel::setValues()
-{
-  ui->txVoltageCalibration->setValue((double)generalSettings.txVoltageCalibration/10);
-  ui->txCurrentCalibration->setValue((double)generalSettings.txCurrentCalibration);
-
-  ui->ana1Neg->setValue(generalSettings.calibSpanNeg[0]);
-  ui->ana2Neg->setValue(generalSettings.calibSpanNeg[1]);
-  ui->ana3Neg->setValue(generalSettings.calibSpanNeg[2]);
-  ui->ana4Neg->setValue(generalSettings.calibSpanNeg[3]);
-  ui->ana5Neg->setValue(generalSettings.calibSpanNeg[4]);
-  ui->ana6Neg->setValue(generalSettings.calibSpanNeg[5]);
-  ui->ana7Neg->setValue(generalSettings.calibSpanNeg[6]);
-  ui->ana8Neg->setValue(generalSettings.calibSpanNeg[7]);
-
-  ui->ana1Mid->setValue(generalSettings.calibMid[0]);
-  ui->ana2Mid->setValue(generalSettings.calibMid[1]);
-  ui->ana3Mid->setValue(generalSettings.calibMid[2]);
-  ui->ana4Mid->setValue(generalSettings.calibMid[3]);
-  ui->ana5Mid->setValue(generalSettings.calibMid[4]);
-  ui->ana6Mid->setValue(generalSettings.calibMid[5]);
-  ui->ana7Mid->setValue(generalSettings.calibMid[6]);
-  ui->ana8Mid->setValue(generalSettings.calibMid[7]);
-
-  ui->ana1Pos->setValue(generalSettings.calibSpanPos[0]);
-  ui->ana2Pos->setValue(generalSettings.calibSpanPos[1]);
-  ui->ana3Pos->setValue(generalSettings.calibSpanPos[2]);
-  ui->ana4Pos->setValue(generalSettings.calibSpanPos[3]);
-  ui->ana5Pos->setValue(generalSettings.calibSpanPos[4]);
-  ui->ana6Pos->setValue(generalSettings.calibSpanPos[5]);
-  ui->ana7Pos->setValue(generalSettings.calibSpanPos[6]);
-  ui->ana8Pos->setValue(generalSettings.calibSpanPos[7]);
-
-  ui->PPM1->setValue(generalSettings.trainer.calib[0]);
-  ui->PPM2->setValue(generalSettings.trainer.calib[1]);
-  ui->PPM3->setValue(generalSettings.trainer.calib[2]);
-  ui->PPM4->setValue(generalSettings.trainer.calib[3]);
-  ui->PPM_MultiplierDSB->setValue((qreal)(generalSettings.PPM_Multiplier+10)/10);
-}
-
-void CalibrationPanel::on_txVoltageCalibration_editingFinished()
-{
-  generalSettings.txVoltageCalibration = ui->txVoltageCalibration->value()*10;
-  emit modified();
-}
-
-
-void CalibrationPanel::on_ana1Neg_editingFinished()
-{
-  generalSettings.calibSpanNeg[0] = ui->ana1Neg->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana2Neg_editingFinished()
-{
-  generalSettings.calibSpanNeg[1] = ui->ana2Neg->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana3Neg_editingFinished()
-{
-  generalSettings.calibSpanNeg[2] = ui->ana3Neg->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana4Neg_editingFinished()
-{
-  generalSettings.calibSpanNeg[3] = ui->ana4Neg->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana5Neg_editingFinished()
-{
-  generalSettings.calibSpanNeg[4] = ui->ana5Neg->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana6Neg_editingFinished()
-{
-  generalSettings.calibSpanNeg[5] = ui->ana6Neg->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana7Neg_editingFinished()
-{
-  generalSettings.calibSpanNeg[6] = ui->ana7Neg->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana8Neg_editingFinished()
-{
-  generalSettings.calibSpanNeg[7] = ui->ana8Neg->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana1Mid_editingFinished()
-{
-  generalSettings.calibMid[0] = ui->ana1Mid->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana2Mid_editingFinished()
-{
-  generalSettings.calibMid[1] = ui->ana2Mid->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana3Mid_editingFinished()
-{
-  generalSettings.calibMid[2] = ui->ana3Mid->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana4Mid_editingFinished()
-{
-  generalSettings.calibMid[3] = ui->ana4Mid->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana5Mid_editingFinished()
-{
-  generalSettings.calibMid[4] = ui->ana5Mid->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana6Mid_editingFinished()
-{
-  generalSettings.calibMid[5] = ui->ana6Mid->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana7Mid_editingFinished()
-{
-  generalSettings.calibMid[6] = ui->ana7Mid->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana8Mid_editingFinished()
-{
-  generalSettings.calibMid[7] = ui->ana8Mid->value();
-  emit modified();
-}
-
-
-void CalibrationPanel::on_ana1Pos_editingFinished()
-{
-  generalSettings.calibSpanPos[0] = ui->ana1Pos->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana2Pos_editingFinished()
-{
-  generalSettings.calibSpanPos[1] = ui->ana2Pos->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana3Pos_editingFinished()
-{
-  generalSettings.calibSpanPos[2] = ui->ana3Pos->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana4Pos_editingFinished()
-{
-  generalSettings.calibSpanPos[3] = ui->ana4Pos->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana5Pos_editingFinished()
-{
-  generalSettings.calibSpanPos[4] = ui->ana5Pos->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana6Pos_editingFinished()
-{
-  generalSettings.calibSpanPos[5] = ui->ana6Pos->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana7Pos_editingFinished()
-{
-  generalSettings.calibSpanPos[6] = ui->ana7Pos->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_ana8Pos_editingFinished()
-{
-  generalSettings.calibSpanPos[7] = ui->ana8Pos->value();
-  emit modified();
-}
-
-void CalibrationPanel::on_serialPortMode_currentIndexChanged(int index)
-{
-  generalSettings.hw_uartMode = index;
-  emit modified();
+  switch(column) {
+    case 0:
+      generalSettings.calibSpanNeg[row] = value;
+      break;
+    case 1:
+      generalSettings.calibMid[row] = value;
+      break;
+    case 2:
+      generalSettings.calibSpanPos[row] = value;
+      break;
+  }
 }

companion/src/generaledit/calibration.h

@@ -1,6 +1,7 @@
 #ifndef CALIBRATION_H
 #define CALIBRATION_H
 
+#include <QTableWidget>
 #include "generaledit.h"
 
 namespace Ui {
@@ -17,58 +18,16 @@ class CalibrationPanel : public GeneralPanel
 
   public:
     CalibrationPanel(QWidget *parent, GeneralSettings & generalSettings, Firmware * firmware);
-    virtual ~CalibrationPanel();
-    // virtual void update();
+    virtual ~CalibrationPanel() {};
 
   private slots:
-    void on_txVoltageCalibration_editingFinished();
-    void on_PPM1_editingFinished();
-    void on_PPM2_editingFinished();
-    void on_PPM3_editingFinished();
-    void on_PPM4_editingFinished();
-    void on_PPM_MultiplierDSB_editingFinished();
-
-    void on_txCurrentCalibration_editingFinished();
-    void on_bluetoothEnable_stateChanged(int);
-
-    void on_ana1Neg_editingFinished();
-    void on_ana2Neg_editingFinished();
-    void on_ana3Neg_editingFinished();
-    void on_ana4Neg_editingFinished();
-    void on_ana5Neg_editingFinished();
-    void on_ana6Neg_editingFinished();
-    void on_ana7Neg_editingFinished();
-    void on_ana8Neg_editingFinished();
-
-    void on_ana1Mid_editingFinished();
-    void on_ana2Mid_editingFinished();
-    void on_ana3Mid_editingFinished();
-    void on_ana4Mid_editingFinished();
-    void on_ana5Mid_editingFinished();
-    void on_ana6Mid_editingFinished();
-    void on_ana7Mid_editingFinished();
-    void on_ana8Mid_editingFinished();
-
-    void on_ana1Pos_editingFinished();
-    void on_ana2Pos_editingFinished();
-    void on_ana3Pos_editingFinished();
-    void on_ana4Pos_editingFinished();
-    void on_ana5Pos_editingFinished();
-    void on_ana6Pos_editingFinished();
-    void on_ana7Pos_editingFinished();
-    void on_ana8Pos_editingFinished();
-
-    void on_serialPortMode_currentIndexChanged(int index);
-
-  protected:
-    void setupPotConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type);
-    void setupSliderConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type);
-    void setupSwitchConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type, bool threePos);
+    void onCellChanged(int value);
 
   private:
-    Ui::Calibration *ui;
+    QTableWidget * tableWidget;
 
-    void setValues();
+    int getCalibrationValue(int row, int column);
+    void setCalibrationValue(int row, int column, int value);
 };
 
 #endif // CALIBRATION_H

companion/src/generaledit/generaledit.cpp

@@ -1,6 +1,3 @@
-#include <QDateTime>
-#include <QtGui>
-#include <QScrollArea>
 #include "generaledit.h"
 #include "ui_generaledit.h"
 #include "helpers.h"
@@ -8,6 +5,7 @@
 #include "generalsetup.h"
 #include "trainer.h"
 #include "calibration.h"
+#include "hardware.h"
 #include "../modeledit/customfunctions.h"
 #include "verticalscrollarea.h"
 
@@ -42,7 +40,8 @@ GeneralEdit::GeneralEdit(QWidget * parent, RadioData & radioData, Firmware * fir
     addTab(new CustomFunctionsPanel(this, NULL, generalSettings, firmware), tr("Global Functions"));
   }
   addTab(new TrainerPanel(this, generalSettings, firmware), tr("Trainer"));
-  addTab(new CalibrationPanel(this, generalSettings, firmware), tr("Hardware / Calibration"));
+  addTab(new HardwarePanel(this, generalSettings, firmware), tr("Hardware"));
+  addTab(new CalibrationPanel(this, generalSettings, firmware), tr("Calibration"));
 
   ui->tabWidget->setCurrentIndex( g.generalEditTab() );
 }
@@ -82,12 +81,15 @@ void GeneralEdit::on_calretrieve_PB_clicked()
 {
   int profile_id=ui->profile_CB->itemData(ui->profile_CB->currentIndex()).toInt();
   QString calib=g.profile[profile_id].stickPotCalib();
-  int potsnum=GetCurrentFirmware()->getCapability(Pots);
+  int potsnum=GetCurrentFirmware()->getCapability(Pots)+GetCurrentFirmware()->getCapability(Sliders);
+  int numSwPots=GetCurrentFirmware()->getCapability(Switches)+GetCurrentFirmware()->getCapability(Pots)+GetCurrentFirmware()->getCapability(Sliders);
   if (calib.isEmpty()) {
     return;
   }
   else {
     QString trainercalib = g.profile[profile_id].trainerCalib();
+    QString hwtypes = g.profile[profile_id].controlTypes();
+    QString controlNames=g.profile[profile_id].controlNames();
     int8_t txVoltageCalibration = (int8_t)g.profile[profile_id].txVoltageCalibration();
     int8_t txCurrentCalibration = (int8_t)g.profile[profile_id].txCurrentCalibration();
     int8_t PPM_Multiplier = (int8_t)g.profile[profile_id].ppmMultiplier();
@@ -134,6 +136,45 @@ void GeneralEdit::on_calretrieve_PB_clicked()
     } else {
       QMessageBox::critical(this, tr("Warning"), tr("Wrong data in profile, radio calibration was not retrieved"));
     }
+    if (hwtypes.length()==numSwPots) {
+      QString Byte;
+      int16_t byte16;
+      QByteArray qba;
+      int16_t offset;
+      bool ok;
+      for (int i=0; i<NUM_STICKS; i++) {
+        qba = controlNames.mid(3*i,3).toLatin1();
+        strcpy(generalSettings.stickName[i], qba.data());
+      }
+      for (int i=0; i<(GetCurrentFirmware()->getCapability(Switches)); i++) {
+        Byte=hwtypes.mid(i,1);
+        byte16=(int16_t)Byte.toInt(&ok,16);
+        qba=controlNames.mid(3*(i+NUM_STICKS),3).toLatin1();
+        if (ok)
+          generalSettings.switchConfig[i]=byte16;
+          strcpy(generalSettings.switchName[i], qba.data());
+      }
+      offset = GetCurrentFirmware()->getCapability(Switches);
+      for (int i=0; i<(GetCurrentFirmware()->getCapability(Pots)); i++) {
+        Byte=hwtypes.mid(i+offset,1);
+        byte16=(int16_t)Byte.toInt(&ok,16);
+        qba=controlNames.mid(3*(i+NUM_STICKS+offset),3).toLatin1();
+        if (ok)
+          generalSettings.potConfig[i]=byte16;
+          strcpy(generalSettings.potName[i], qba.data());
+      }
+      offset += GetCurrentFirmware()->getCapability(Pots);
+      for (int i=0; i<(GetCurrentFirmware()->getCapability(Sliders)); i++) {
+        Byte=hwtypes.mid(i+offset,1);
+        byte16=(int16_t)Byte.toInt(&ok,16);
+        qba=controlNames.mid(3*(i+NUM_STICKS+offset),3).toLatin1();
+        if (ok)
+          generalSettings.sliderConfig[i]=byte16;
+          strcpy(generalSettings.sliderName[i], qba.data());
+      }
+    } else {
+      QMessageBox::critical(this, tr("Warning"), tr("Wrong data in profile, Switch/pot config not retrieved"));
+    }
     if ((DisplaySet.length()==6) && (BeeperSet.length()==4) && (HapticSet.length()==6) && (SpeakerSet.length()==6)) {
       generalSettings.stickMode=GSStickMode;
       uint8_t byte8u;
@@ -181,8 +222,8 @@ void GeneralEdit::on_calretrieve_PB_clicked()
         if (ok)
           generalSettings.imperial=byte8u;
         chars=CountrySet.mid(4,2);
-        generalSettings.ttsLanguage[0]=chars[0].toAscii();
-        generalSettings.ttsLanguage[1]=chars[1].toAscii();
+        generalSettings.ttsLanguage[0]=chars[0].toLatin1();
+        generalSettings.ttsLanguage[1]=chars[1].toLatin1();
       }
     }
     else {
@@ -198,13 +239,15 @@ void GeneralEdit::on_calstore_PB_clicked()
   int profile_id=ui->profile_CB->itemData(ui->profile_CB->currentIndex()).toInt();
 
   QString name=g.profile[profile_id].name();
-  int potsnum=GetCurrentFirmware()->getCapability(Pots);
+  int potsnum=GetCurrentFirmware()->getCapability(Pots)+GetCurrentFirmware()->getCapability(Sliders);
   if (name.isEmpty()) {
     ui->calstore_PB->setDisabled(true);
     return;
   }
   else {
     QString calib=g.profile[profile_id].stickPotCalib();
+    QString hwtypes=g.profile[profile_id].controlTypes();
+    QString controlNames=g.profile[profile_id].controlNames();
     if (!(calib.isEmpty())) {
       int ret = QMessageBox::question(this, "Companion",
                       tr("Do you want to store calibration in %1 profile<br>overwriting existing calibration?").arg(name) ,
@@ -225,6 +268,25 @@ void GeneralEdit::on_calstore_PB_clicked()
       calib.append(QString("%1").arg((uint16_t)generalSettings.trainer.calib[i], 4, 16, QChar('0')));
     }
     g.profile[profile_id].trainerCalib( calib );
+    hwtypes.clear();
+    controlNames.clear();
+    for (int i=0; i<NUM_STICKS; i++) {
+      controlNames.append(QString("%1").arg(generalSettings.stickName[i], -3));
+    }
+    for (int i=0; i<(GetCurrentFirmware()->getCapability(Switches)); i++) {
+      hwtypes.append(QString("%1").arg((uint16_t)generalSettings.switchConfig[i], 1));
+      controlNames.append(QString("%1").arg(generalSettings.switchName[i], -3));
+    }
+    for (int i=0; i<(GetCurrentFirmware()->getCapability(Pots)); i++) {
+      hwtypes.append(QString("%1").arg((uint16_t)generalSettings.potConfig[i], 1));
+      controlNames.append(QString("%1").arg(generalSettings.potName[i], -3));
+    }
+    for (int i=0; i<(GetCurrentFirmware()->getCapability(Sliders)); i++) {
+      hwtypes.append(QString("%1").arg((uint16_t)generalSettings.sliderConfig[i], 1));
+      controlNames.append(QString("%1").arg(generalSettings.sliderName[i], -3));
+    }
+    g.profile[profile_id].controlTypes( hwtypes );
+    g.profile[profile_id].controlNames( controlNames );
     g.profile[profile_id].txVoltageCalibration( generalSettings.txVoltageCalibration );
     g.profile[profile_id].txCurrentCalibration( generalSettings.txCurrentCalibration );
     g.profile[profile_id].vBatWarn( generalSettings.vBatWarn );

companion/src/generaledit/generaledit.h

@@ -1,7 +1,7 @@
 #ifndef GENERALEDIT_H
 #define GENERALEDIT_H
 
-#include <QDialog>
+#include <QtWidgets>
 #include "eeprominterface.h"
 #include "genericpanel.h"
 

companion/src/generaledit/generalsetup.cpp

@@ -1,6 +1,5 @@
 #include "generalsetup.h"
 #include "ui_generalsetup.h"
-#include <QMessageBox>
 
 GeneralSetupPanel::GeneralSetupPanel(QWidget * parent, GeneralSettings & generalSettings, Firmware * firmware):
 GeneralPanel(parent, generalSettings, firmware),
@@ -275,8 +274,8 @@ void GeneralSetupPanel::populateBacklightCB()
 void GeneralSetupPanel::populateVoiceLangCB()
 {
   QComboBox * b = ui->voiceLang_CB;
-  QString strings[] = { QObject::tr("English"), QObject::tr("Finnish"), QObject::tr("French"), QObject::tr("Italian"), QObject::tr("German"), QObject::tr("Czech"), QObject::tr("Slovak"), QObject::tr("Spanish"), QObject::tr("Polish"), QObject::tr("Portuguese"), QObject::tr("Swedish"), NULL};
-  QString langcode[] = { "en", "fi","fr", "it", "de", "cz", "sk", "es", "pl", "pt", "se", NULL};
+  QString strings[] = { QObject::tr("English"), QObject::tr("Dutch"), QObject::tr("French"), QObject::tr("Italian"), QObject::tr("German"), QObject::tr("Czech"), QObject::tr("Slovak"), QObject::tr("Spanish"), QObject::tr("Polish"), QObject::tr("Portuguese"), QObject::tr("Swedish"), QObject::tr("Hungarian"), NULL};
+  QString langcode[] = { "en", "nl","fr", "it", "de", "cz", "sk", "es", "pl", "pt", "se", "hu", NULL};
 
   b->clear();
   for (int i=0; strings[i]!=NULL; i++) {
@@ -316,7 +315,7 @@ void GeneralSetupPanel::on_voiceLang_CB_currentIndexChanged(int index)
   if (!lock) {
     QString code = ui->voiceLang_CB->itemData(index).toString();
     for (int i=0; i<2; i++) {
-      generalSettings.ttsLanguage[i] = code.at(i).toAscii();
+      generalSettings.ttsLanguage[i] = code.at(i).toLatin1();
     }
     generalSettings.ttsLanguage[2] = '\0';
     emit modified();

companion/src/generaledit/generalsetup.ui

@@ -658,7 +658,7 @@
        <item>
         <widget class="QCheckBox" name="adjustRTC">
          <property name="toolTip">
-          <string>If you enable FAI, you loose the vario, the play functions, the telemetry screen. This function cannot be disabled by the radio.</string>
+          <string>Automatically adjust the radio's clock if a GPS is connected to telemetry.</string>
          </property>
          <property name="layoutDirection">
           <enum>Qt::RightToLeft</enum>

companion/src/generaledit/hardware.cpp

@@ -0,0 +1,241 @@
+#include "hardware.h"
+#include "ui_hardware.h"
+
+void HardwarePanel::setupSwitchConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type, bool threePos = true)
+{
+  bool enabled = false;
+
+  if (IS_TARANIS(firmware->getBoard())) {
+    if (IS_TARANIS_X9E(firmware->getBoard())) {
+      enabled = true;
+      type->addItem(tr("None"), GeneralSettings::SWITCH_NONE);
+    }
+    else if (index < 8) {
+      enabled = true;
+    }
+  }
+
+  if (enabled) {
+    type->addItem(tr("2 Positions Toggle"), GeneralSettings::SWITCH_TOGGLE);
+    type->addItem(tr("2 Positions"), GeneralSettings::SWITCH_2POS);
+    if (threePos) type->addItem(tr("3 Positions"), GeneralSettings::SWITCH_3POS);
+    name->setField(generalSettings.switchName[index], 3, this);
+    type->setField(generalSettings.switchConfig[index], this);
+  }
+  else {
+    label->hide();
+    name->hide();
+    type->hide();
+  }
+}
+
+void HardwarePanel::setupPotConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type)
+{
+  bool enabled = false;
+
+  if (IS_TARANIS_X9E(firmware->getBoard()) && index < 4) {
+    label->setText(RawSource(SOURCE_TYPE_STICK, index+NUM_STICKS).toString());
+    enabled = true;
+  }
+  else if (IS_TARANIS_PLUS(firmware->getBoard()) && index < 3) {
+    enabled = true;
+  }
+  else if (IS_TARANIS(firmware->getBoard()) && index < 2) {
+    enabled = true;
+  }
+
+  if (enabled) {
+    type->addItem(tr("None"), GeneralSettings::POT_NONE);
+    type->addItem(tr("Pot with detent"), GeneralSettings::POT_WITH_DETENT);
+    type->addItem(tr("Multipos switch"), GeneralSettings::POT_MULTIPOS_SWITCH);
+    type->addItem(tr("Pot without detent"), GeneralSettings::POT_WITHOUT_DETENT);
+    name->setField(generalSettings.potName[index], 3, this);
+    type->setField(generalSettings.potConfig[index], this);
+  }
+  else {
+    label->hide();
+    name->hide();
+    type->hide();
+  }
+}
+
+void HardwarePanel::setupSliderConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type)
+{
+  bool enabled = false;
+
+  if (IS_TARANIS(firmware->getBoard()) && index < 2) {
+    type->setEnabled(false);
+    enabled = true;
+  }
+  else if (IS_TARANIS_X9E(firmware->getBoard()) && index < 4) {
+    enabled = true;
+  }
+
+  if (IS_TARANIS_X9E(firmware->getBoard())) {
+    label->setText(RawSource(SOURCE_TYPE_STICK, index+NUM_STICKS+4).toString());
+  }
+
+  if (enabled) {
+    type->addItem(tr("None"), GeneralSettings::SLIDER_NONE);
+    type->addItem(tr("Slider with detent"), GeneralSettings::SLIDER_WITH_DETENT);
+    name->setField(generalSettings.sliderName[index], 3, this);
+    type->setField(generalSettings.sliderConfig[index], this);
+  }
+  else {
+    label->hide();
+    name->hide();
+    type->hide();
+  }
+}
+
+HardwarePanel::HardwarePanel(QWidget * parent, GeneralSettings & generalSettings, Firmware * firmware):
+  GeneralPanel(parent, generalSettings, firmware),
+  ui(new Ui::Hardware)
+{
+  ui->setupUi(this);
+
+  if (IS_TARANIS(firmware->getBoard())) {
+    ui->rudName->setField(generalSettings.stickName[0], 3, this);
+    ui->eleName->setField(generalSettings.stickName[1], 3, this);
+    ui->thrName->setField(generalSettings.stickName[2], 3, this);
+    ui->ailName->setField(generalSettings.stickName[3], 3, this);
+  }
+  else {
+    ui->rudLabel->hide();
+    ui->rudName->hide();
+    ui->eleLabel->hide();
+    ui->eleName->hide();
+    ui->thrLabel->hide();
+    ui->thrName->hide();
+    ui->ailLabel->hide();
+    ui->ailName->hide();
+  }
+
+  setupPotConfig(0, ui->pot1Label, ui->pot1Name, ui->pot1Type);
+  setupPotConfig(1, ui->pot2Label, ui->pot2Name, ui->pot2Type);
+  setupPotConfig(2, ui->pot3Label, ui->pot3Name, ui->pot3Type);
+  setupPotConfig(3, ui->pot4Label, ui->pot4Name, ui->pot4Type);
+
+  setupSliderConfig(0, ui->lsLabel, ui->lsName, ui->lsType);
+  setupSliderConfig(1, ui->rsLabel, ui->rsName, ui->rsType);
+  setupSliderConfig(2, ui->ls2Label, ui->ls2Name, ui->ls2Type);
+  setupSliderConfig(3, ui->rs2Label, ui->rs2Name, ui->rs2Type);
+
+  setupSwitchConfig(0, ui->saLabel, ui->saName, ui->saType);
+  setupSwitchConfig(1, ui->sbLabel, ui->sbName, ui->sbType);
+  setupSwitchConfig(2, ui->scLabel, ui->scName, ui->scType);
+  setupSwitchConfig(3, ui->sdLabel, ui->sdName, ui->sdType);
+  setupSwitchConfig(4, ui->seLabel, ui->seName, ui->seType);
+  setupSwitchConfig(5, ui->sfLabel, ui->sfName, ui->sfType, false);   //switch does not support 3POS
+  setupSwitchConfig(6, ui->sgLabel, ui->sgName, ui->sgType);
+  setupSwitchConfig(7, ui->shLabel, ui->shName, ui->shType, false);   //switch does not support 3POS
+  setupSwitchConfig(8, ui->siLabel, ui->siName, ui->siType);
+  setupSwitchConfig(9, ui->sjLabel, ui->sjName, ui->sjType);
+  setupSwitchConfig(10, ui->skLabel, ui->skName, ui->skType);
+  setupSwitchConfig(11, ui->slLabel, ui->slName, ui->slType);
+  setupSwitchConfig(12, ui->smLabel, ui->smName, ui->smType);
+  setupSwitchConfig(13, ui->snLabel, ui->snName, ui->snType);
+  setupSwitchConfig(14, ui->soLabel, ui->soName, ui->soType);
+  setupSwitchConfig(15, ui->spLabel, ui->spName, ui->spType);
+  setupSwitchConfig(16, ui->sqLabel, ui->sqName, ui->sqType);
+  setupSwitchConfig(17, ui->srLabel, ui->srName, ui->srType);
+
+  if (IS_TARANIS(firmware->getBoard())) {
+    ui->serialPortMode->setCurrentIndex(generalSettings.hw_uartMode);
+  }
+  else {
+    ui->serialPortMode->hide();
+    ui->serialPortLabel->hide();
+  }
+
+  if (!IS_SKY9X(firmware->getBoard())) {
+    ui->txCurrentCalibration->hide();
+    ui->txCurrentCalibrationLabel->hide();
+  }
+
+  if (IS_TARANIS_X9E(firmware->getBoard())) {
+    ui->bluetoothEnable->setChecked(generalSettings.bluetoothEnable);
+    ui->bluetoothName->setField(generalSettings.bluetoothName, 10, this);
+  }
+  else {
+    ui->bluetoothLabel->hide();
+    ui->bluetoothEnable->hide();
+    ui->bluetoothName->hide();
+  }
+
+  disableMouseScrolling();
+
+  setValues();
+}
+
+HardwarePanel::~HardwarePanel()
+{
+  delete ui;
+}
+
+void HardwarePanel::on_PPM_MultiplierDSB_editingFinished()
+{
+  generalSettings.PPM_Multiplier = (int)(ui->PPM_MultiplierDSB->value()*10)-10;
+  emit modified();
+}
+
+void HardwarePanel::on_PPM1_editingFinished()
+{
+  generalSettings.trainer.calib[0] = ui->PPM1->value();
+  emit modified();
+}
+
+void HardwarePanel::on_PPM2_editingFinished()
+{
+  generalSettings.trainer.calib[1] = ui->PPM2->value();
+  emit modified();
+}
+
+void HardwarePanel::on_PPM3_editingFinished()
+{
+  generalSettings.trainer.calib[2] = ui->PPM3->value();
+  emit modified();
+}
+
+void HardwarePanel::on_PPM4_editingFinished()
+{
+  generalSettings.trainer.calib[3] = ui->PPM4->value();
+  emit modified();
+}
+
+
+void HardwarePanel::on_txCurrentHardware_editingFinished()
+{
+  generalSettings.txCurrentCalibration = ui->txCurrentCalibration->value();
+  emit modified();
+}
+
+void HardwarePanel::on_bluetoothEnable_stateChanged(int)
+{
+  generalSettings.bluetoothEnable = ui->bluetoothEnable->isChecked();
+  emit modified();
+}
+
+void HardwarePanel::setValues()
+{
+  ui->txVoltageCalibration->setValue((double)generalSettings.txVoltageCalibration/10);
+  ui->txCurrentCalibration->setValue((double)generalSettings.txCurrentCalibration);
+
+  ui->PPM1->setValue(generalSettings.trainer.calib[0]);
+  ui->PPM2->setValue(generalSettings.trainer.calib[1]);
+  ui->PPM3->setValue(generalSettings.trainer.calib[2]);
+  ui->PPM4->setValue(generalSettings.trainer.calib[3]);
+  ui->PPM_MultiplierDSB->setValue((qreal)(generalSettings.PPM_Multiplier+10)/10);
+}
+
+void HardwarePanel::on_txVoltageHardware_editingFinished()
+{
+  generalSettings.txVoltageCalibration = ui->txVoltageCalibration->value()*10;
+  emit modified();
+}
+
+void HardwarePanel::on_serialPortMode_currentIndexChanged(int index)
+{
+  generalSettings.hw_uartMode = index;
+  emit modified();
+}

companion/src/generaledit/hardware.h

@@ -0,0 +1,46 @@
+#ifndef HARDWARE_H
+#define HARDWARE_H
+
+#include "generaledit.h"
+
+namespace Ui {
+  class Hardware;
+}
+
+class QLabel;
+class AutoLineEdit;
+class AutoComboBox;
+
+class HardwarePanel : public GeneralPanel
+{
+    Q_OBJECT
+
+  public:
+    HardwarePanel(QWidget *parent, GeneralSettings & generalSettings, Firmware * firmware);
+    virtual ~HardwarePanel();
+
+  private slots:
+    void on_txVoltageHardware_editingFinished();
+    void on_PPM1_editingFinished();
+    void on_PPM2_editingFinished();
+    void on_PPM3_editingFinished();
+    void on_PPM4_editingFinished();
+    void on_PPM_MultiplierDSB_editingFinished();
+
+    void on_txCurrentHardware_editingFinished();
+    void on_bluetoothEnable_stateChanged(int);
+
+    void on_serialPortMode_currentIndexChanged(int index);
+
+  protected:
+    void setupPotConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type);
+    void setupSliderConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type);
+    void setupSwitchConfig(int index, QLabel *label, AutoLineEdit *name, AutoComboBox *type, bool threePos);
+
+  private:
+    Ui::Hardware *ui;
+
+    void setValues();
+};
+
+#endif // HARDWARE_H

companion/src/helpers.cpp

@@ -12,6 +12,8 @@
 #include "simulatorinterface.h"
 #include "firmwareinterface.h"
 
+Stopwatch gStopwatch("global");
+
 const QColor colors[C9X_MAX_CURVES] = {
   QColor(0,0,127),
   QColor(0,127,0),
@@ -84,7 +86,7 @@ void getFileComboBoxValue(QComboBox * b, char * dest, int length)
 {
   memset(dest, 0, length+1);
   if (b->currentText() != "----") {
-    strncpy(dest, b->currentText().toAscii(), length);
+    strncpy(dest, b->currentText().toLatin1(), length);
   }
 }
 
@@ -173,7 +175,7 @@ void GVarGroup::valuesChanged()
     else if (sb)
       weight = sb->value();
     else
-      weight = dsb->value()/step;
+      weight = round(dsb->value()/step);
   }
 }
 
@@ -788,7 +790,13 @@ void startSimulation(QWidget * parent, RadioData & radioData, int modelIdx)
     }
     BoardEnum board = GetCurrentFirmware()->getBoard();
     SimulatorDialog * sd;
-    if (IS_TARANIS(board)) {
+    if (board == BOARD_HORUS) {
+      sd = new SimulatorDialogHorus(parent, si, flags);
+    }
+    else if (board == BOARD_FLAMENCO) {
+      sd = new SimulatorDialogFlamenco(parent, si, flags);
+    }
+    else if (IS_TARANIS(board)) {
       for (int i=0; i<GetCurrentFirmware()->getCapability(Pots); i++) {
         if (radioData.generalSettings.isPotAvailable(i)) {
           flags |= (SIMULATOR_FLAGS_S1 << i);
@@ -995,3 +1003,92 @@ QStringList extractLatLon(const QString & position)
   }
   return result;
 }
+
+TableLayout::TableLayout(QWidget * parent, int rowCount, const QStringList & headerLabels)
+{
+#if defined(TABLE_LAYOUT)
+  tableWidget = new QTableWidget(parent);
+  QVBoxLayout * layout = new QVBoxLayout();
+  layout->addWidget(tableWidget);
+  layout->setContentsMargins(0, 0, 0, 0);
+  parent->setLayout(layout);
+
+  tableWidget->setRowCount(rowCount);
+  tableWidget->setColumnCount(headerLabels.size());
+  tableWidget->setShowGrid(false);
+  tableWidget->verticalHeader()->setVisible(false);
+  tableWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
+  tableWidget->setSelectionMode(QAbstractItemView::NoSelection);
+  tableWidget->setFrameStyle(QFrame::NoFrame | QFrame::Plain);
+  tableWidget->setStyleSheet("QTableWidget {background-color: transparent;}");
+  tableWidget->setHorizontalHeaderLabels(headerLabels);
+#else
+  gridWidget = new QGridLayout(parent);
+
+  int col = 0;
+  foreach(QString text, headerLabels) {
+    QLabel *label = new QLabel();
+    label->setFrameShape(QFrame::Panel);
+    label->setFrameShadow(QFrame::Raised);
+    label->setMidLineWidth(0);
+    label->setAlignment(Qt::AlignCenter);
+    label->setMargin(5);
+    label->setText(text);
+    // if (!minimize)
+    //   label->setMinimumWidth(100);
+    gridWidget->addWidget(label, 0, col++);
+  }
+#endif
+}
+
+void TableLayout::addWidget(int row, int column, QWidget * widget)
+{
+#if defined(TABLE_LAYOUT)
+  QHBoxLayout * layout = new QHBoxLayout(tableWidget);
+  layout->addWidget(widget);
+  addLayout(row, column, layout);
+#else
+  gridWidget->addWidget(widget, row + 1, column);
+#endif
+}
+
+void TableLayout::addLayout(int row, int column, QLayout * layout)
+{
+#if defined(TABLE_LAYOUT)
+  layout->setContentsMargins(1, 3, 1, 3);
+  QWidget * containerWidget = new QWidget(tableWidget);
+  containerWidget->setLayout(layout);
+  tableWidget->setCellWidget(row, column, containerWidget);
+#else
+  gridWidget->addLayout(layout, row + 1, column);
+#endif
+}
+
+void TableLayout::resizeColumnsToContents() 
+{
+#if defined(TABLE_LAYOUT)
+  tableWidget->resizeColumnsToContents();
+#else
+#endif
+}
+
+void TableLayout::setColumnWidth(int col, int width) 
+{
+#if defined(TABLE_LAYOUT)
+  tableWidget->setColumnWidth(col, width);
+#else
+#endif
+}
+
+void TableLayout::pushRowsUp(int row) 
+{
+#if defined(TABLE_LAYOUT)
+#else
+  // Push the rows up
+  QSpacerItem * spacer = new QSpacerItem(0, 0, QSizePolicy::Minimum, QSizePolicy::Expanding );
+  gridWidget->addItem(spacer, row, 0);
+#endif
+  // Push rows upward
+  // addDoubleSpring(gridLayout, 5, num_fsw+1);
+
+}

companion/src/helpers.h

@@ -1,7 +1,11 @@
 #ifndef HELPERS_H
 #define HELPERS_H
 
-#include <QtGui>
+#include <QCheckBox>
+#include <QSpinBox>
+#include <QTableWidget>
+#include <QGridLayout>
+#include <QDebug>
 #include "eeprominterface.h"
 
 extern const QColor colors[C9X_MAX_CURVES];
@@ -201,4 +205,60 @@ private:
 double toDecimalCoordinate(const QString & value);
 QStringList extractLatLon(const QString & position);
 
+class TableLayout
+{
+public:
+  TableLayout(QWidget * parent, int rowCount, const QStringList & headerLabels);
+  // ~TableLayout() ;
+
+  void addWidget(int row, int column, QWidget * widget);
+  void addLayout(int row, int column, QLayout * layout);
+
+  void resizeColumnsToContents();
+  void setColumnWidth(int col, int width);
+  void pushRowsUp(int row); 
+
+private:
+#if defined(TABLE_LAYOUT)
+  QTableWidget * tableWidget; 
+#else
+  QGridLayout * gridWidget; 
+#endif
+};
+
+
+class Stopwatch
+{
+public:
+  Stopwatch(const QString & name) :
+    name(name), total(0) {
+    timer.start();
+  };
+  ~Stopwatch() {};
+
+  void restart() {
+    total = 0;
+    timer.restart();
+  };
+
+  void report() {
+    qint64 elapsed = timer.restart();
+    total += elapsed;
+    qDebug() << name << QString("%1 ms [%2 ms]").arg(elapsed).arg(total);
+  };
+
+  void report(const QString & text) {
+    qint64 elapsed = timer.restart();
+    total += elapsed;
+    qDebug() << name << text << QString("%1 ms [%2 ms]").arg(elapsed).arg(total);
+  };
+
+private:
+  QString name;
+  QElapsedTimer timer;
+  qint64 total;
+};
+
+extern Stopwatch gStopwatch;
+
 #endif // HELPERS_H