release 2249

Taranis simu now uses up/down keys

src/Makefile

@@ -130,9 +130,6 @@ GRAPHICS = YES
 BOLD = YES
 BATTGRAPH = NO
 
-# THR trace (in STATS screen)
-THR_TRACE = YES
-
 # PPM center adjustable
 # Values = YES, NO
 PPM_CENTER_ADJUSTABLE = NO
@@ -239,6 +236,12 @@ ifneq ($(PCB), $(filter $(PCB), STD 9X 9XR STD128 9X128 9XR128 GRUVIN9X MEGA2560
   $(error Sorry, the PCB $(PCB) is not supported yet in openTx)
 endif
 
+GVARS_VARIANT  = +1 
+FRSKY_VARIANT  = +2
+3POS_VARIANT   = +4
+M128_VARIANT   = +32768
+EEPROM_VARIANT = 0
+
 ifeq ($(PCB), $(filter $(PCB), STD 9X 9XR))
   # 9x/9xr radio
   ARCH = AVR
@@ -247,6 +250,7 @@ ifeq ($(PCB), $(filter $(PCB), STD 9X 9XR))
   OPT = s  
   XCURVES = NO
   SDCARD = NO
+  THR_TRACE = NO
   EXTRAINCDIRS = stock
   CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBSTD -DCPUM64 -DEEPROM_VARIANT=$(shell echo ${EEPROM_VARIANT} | bc)
   BOARDSRC = stock/board_stock.cpp
@@ -298,7 +302,9 @@ ifeq ($(PCB), $(filter $(PCB), STD128 9X128 9XR128))
   MCU = atmega128
   OPT = 2
   SDCARD = NO
-  CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBSTD -DCPUM128 -DEEPROM_VARIANT=0x8000
+  THR_TRACE = NO
+  EEPROM_VARIANT += ${M128_VARIANT}
+  CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBSTD -DCPUM128 -DEEPROM_VARIANT=$(shell echo ${EEPROM_VARIANT} | bc)
   EXTRAINCDIRS = stock
   BOARDSRC = stock/board_stock.cpp
   EXTRABOARDSRC = stock/lcd_driver.cpp
@@ -356,6 +362,7 @@ ifeq ($(PCB), GRUVIN9X)
   CPPDEFS += -DF_CPU=$(F_CPU)UL -DPCBGRUVIN9X -DEEPROM_VARIANT=0 -DAUDIO -DHAPTIC
   SDCARD = NO
   BEEPER = NO
+  THR_TRACE = YES
   EXTRAINCDIRS = gruvin9x stock FatFs FatFs/option
   BOARDSRC = gruvin9x/board_gruvin9x.cpp
   EXTRABOARDSRC = stock/lcd_driver.cpp
@@ -393,6 +400,7 @@ ifeq ($(PCB), MEGA2560)
   OPT = 2
   CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBGRUVIN9X -DEEPROM_VARIANT=0 -DAUDIO -DHAPTIC
   SDCARD = NO
+  THR_TRACE = YES
   EXTRAINCDIRS = gruvin9x stock FatFs FatFs/option
   BOARDSRC = mega2560/board_mega2560.cpp
   EXTRABOARDSRC = mega2560/lcd_driver_ST7565R.cpp
@@ -436,6 +444,7 @@ ifeq ($(PCB), SKY9X)
   OPT = 2
   SDCARD = YES
   BEEPER = NO
+  THR_TRACE = YES
   CPPDEFS += -DPCBSKY9X -DCPUARM -DEEPROM_VARIANT=0 -DAUDIO -DHAPTIC -DPXX -DDSM2 -DDSM2_PPM -DROTARY_ENCODERS=1
   EXTRAINCDIRS = sky9x CoOS/kernel CoOS/portable
   BOARDSRC = sky9x/board_sky9x.cpp
@@ -493,6 +502,7 @@ ifeq ($(PCB), TARANIS)
   OPT = 2
   CPPDEFS += -DHSE_VALUE=12000000
   SDCARD = YES
+  THR_TRACE = YES
   EXT = FRSKY
   CPPDEFS += -DPCBTARANIS -DCPUARM -DEEPROM_VARIANT=0 -DAUDIO -DPXX
   EXTRAINCDIRS = taranis CoOS/kernel CoOS/portable
@@ -592,11 +602,6 @@ CPPDEFS += -DTRANSLATIONS_$(TRANSLATIONS)
 # TTS language
 CPPDEFS += -DTTS_$(TTS)
 
-GVARS_VARIANT  = +1 
-FRSKY_VARIANT  = +2
-3POS_VARIANT   = +4
-EEPROM_VARIANT = 0
-
 ifeq ($(UNITS), IMPERIAL)
   CPPDEFS += -DIMPERIAL_UNITS
 endif

src/beeper.h

@@ -111,7 +111,7 @@ void beep(uint8_t val);
 #endif
 
 #if !defined(CPUARM)
-inline void BEEPER_HEARTBEAT()
+inline void BUZZER_HEARTBEAT()
 {
     if(g_beepCnt) {
         if(!beepAgainOrig) {

src/eeprom_rlc.cpp

@@ -813,7 +813,7 @@ bool eeLoadGeneral()
   if (theFile.readRlc((uint8_t*)&g_eeGeneral, 1) == 1 && g_eeGeneral.version == EEPROM_VER) {
     theFile.openRlc(FILE_GENERAL);
     if (theFile.readRlc((uint8_t*)&g_eeGeneral, sizeof(g_eeGeneral)) <= sizeof(EEGeneral)) {
-#if defined(CPUM64)
+#if defined(PCBSTD)
       if (g_eeGeneral.variant == EEPROM_VARIANT && g_eeGeneral.chkSum == evalChkSum()) {
         return true;
       }

src/lcd.cpp

@@ -730,11 +730,12 @@ void putsTime(xcoord_t x, uint8_t y, putstime_t tme, LcdFlags att, LcdFlags att2
 
   qr = div(tme, 60);
 
-#if defined(CPUARM)
+#if defined(PCBTARANIS)
   if (att & MIDSIZE) {
     div_t qr2 = div(qr.quot, 60);
     LCD_2DOTS(x+2*8-6, y, att);
     lcd_outdezNAtt(x, y, qr2.quot, att|LEADING0|LEFT, 2);
+    qr.quot = qr2.rem;
     x += 2*8+1;
   }
 #define separator ':'
@@ -812,7 +813,7 @@ void putsMixerSource(xcoord_t x, uint8_t y, uint8_t idx, LcdFlags att)
     putsStrIdx(x, y, STR_PPM, idx-MIXSRC_PPM1+1, att);
   else if (idx <= MIXSRC_LAST_CH)
     putsStrIdx(x, y, STR_CH, idx-MIXSRC_CH1+1, att);
-#if defined(GVARS) || !defined(CPUM64)
+#if defined(GVARS) || !defined(PCBSTD)
   else if (idx <= MIXSRC_LAST_GVAR)
     putsStrIdx(x, y, STR_GV, idx-MIXSRC_GVAR1+1, att);
 #endif
@@ -859,7 +860,7 @@ void putsSwitches(xcoord_t x, uint8_t y, int8_t idx, LcdFlags att)
   }
 #endif
 
-#if !defined(CPUM64)
+#if !defined(PCBSTD)
   else if (idx >= SWSRC_TRAINER_SHORT) {
     idx -= SWSRC_TRAINER_SHORT;
     lcd_putcAtt(x+3*FW, y, (idx & 1) ? CHR_LONG : CHR_SHORT, att);

src/logs.cpp

@@ -104,12 +104,12 @@ const pm_char * openLogs()
 #endif
 
 #if defined(FRSKY_HUB)
-    if (g_model.frsky.usrProto == USR_PROTO_FRSKY)
+    if (IS_USR_PROTO_FRSKY_HUB())
       f_puts("GPS Date,GPS Time,Long,Lat,Course,GPS Speed,GPS Alt,Baro Alt,Temp1,Temp2,RPM,Fuel,Volts,AccelX,AccelY,AccelZ,", &g_oLogFile);
 #endif
 
 #if defined(WS_HOW_HIGH)
-    if (g_model.frsky.usrProto == USR_PROTO_WS_HOW_HIGH)
+    if (IS_USR_PROTO_WS_HOW_HIGH())
       f_puts("WSHH Alt,", &g_oLogFile);
 #endif
 
@@ -173,7 +173,7 @@ void writeLogs()
 #endif
 
 #if defined(FRSKY_HUB)
-      if (g_model.frsky.usrProto == USR_PROTO_FRSKY) {
+      if (IS_USR_PROTO_FRSKY_HUB()) {
         f_printf(&g_oLogFile, "%4d-%02d-%02d,", frskyData.hub.year+2000, frskyData.hub.month, frskyData.hub.day);
         f_printf(&g_oLogFile, "%02d:%02d:%02d,", frskyData.hub.hour, frskyData.hub.min, frskyData.hub.sec);
         f_printf(&g_oLogFile, "%03d.%04d%c,", frskyData.hub.gpsLongitude_bp, frskyData.hub.gpsLongitude_ap,
@@ -193,7 +193,7 @@ void writeLogs()
 #endif
 
 #if defined(WS_HOW_HIGH)
-      if (g_model.frsky.usrProto == USR_PROTO_WS_HOW_HIGH) {
+      if (IS_USR_PROTO_WS_HOW_HIGH()) {
         f_printf(&g_oLogFile, "%d,", TELEMETRY_GPS_ALT_BP);
       }
 #endif

src/menu_model.cpp

@@ -599,10 +599,10 @@ void menuModelSelect(uint8_t event)
       putsModelName(4*FW, y, name, k, 0);
       lcd_outdezAtt(20*FW, y, eeModelSize(k), 0);
 #endif
-      if (k==g_eeGeneral.currModel && (s_copyMode!=COPY_MODE || s_copySrcRow<0 || i+s_pgOfs!=(pgofs_t)sub)) lcd_putc(1, y, '*');
+      if (k==g_eeGeneral.currModel && (s_copyMode!=COPY_MODE || s_copySrcRow<0 || i+s_pgOfs!=(vertpos_t)sub)) lcd_putc(1, y, '*');
     }
 
-    if (s_copyMode && (pgofs_t)sub==i+s_pgOfs) {
+    if (s_copyMode && (vertpos_t)sub==i+s_pgOfs) {
       lcd_filled_rect(9, y, LCD_W-1-9, 7);
       lcd_rect(8, y-1, LCD_W-1-7, 9, s_copyMode == COPY_MODE ? SOLID : DOTTED);
     }
@@ -1447,7 +1447,7 @@ enum menuModelPhaseItems {
   IF_ROTARY_ENCODERS(ITEM_MODEL_PHASE_ROTARY_ENCODERS)
   ITEM_MODEL_PHASE_FADE_IN,
   ITEM_MODEL_PHASE_FADE_OUT,
-#if defined(GVARS) && !defined(CPUM64)
+#if defined(GVARS) && !defined(PCBSTD)
   ITEM_MODEL_PHASE_GVARS_LABEL,
   ITEM_MODEL_PHASE_GV1,
   ITEM_MODEL_PHASE_GV2,
@@ -1463,7 +1463,7 @@ void menuModelPhaseOne(uint8_t event)
   PhaseData *phase = phaseaddress(s_currIdx);
   putsFlightPhase(13*FW, 0, s_currIdx+1, (getFlightPhase()==s_currIdx ? BOLD : 0));
 
-#if defined(GVARS) && !defined(CPUM64)
+#if defined(GVARS) && !defined(PCBSTD)
   static const pm_uint8_t mstate_tab_phase1[] PROGMEM = {0, 0, 0, (uint8_t)-1, 2, 2, 2, 2, 2};
   static const pm_uint8_t mstate_tab_others[] PROGMEM = {0, 0, 3, IF_ROTARY_ENCODERS(NUM_ROTARY_ENCODERS-1) 0, 0, (uint8_t)-1, 2, 2, 2, 2, 2};
 
@@ -1480,7 +1480,7 @@ void menuModelPhaseOne(uint8_t event)
   int8_t sub = m_posVert;
   int8_t editMode = s_editMode;
 
-#if defined(GVARS) && !defined(CPUM64)
+#if defined(GVARS) && !defined(PCBSTD)
   if (s_currIdx == 0 && sub>=ITEM_MODEL_PHASE_SWITCH) sub += ITEM_MODEL_PHASE_FADE_IN-ITEM_MODEL_PHASE_SWITCH;
 
   for (uint8_t k=0; k<LCD_LINES-1; k++) {
@@ -1557,7 +1557,7 @@ void menuModelPhaseOne(uint8_t event)
         phase->fadeOut = EDIT_DELAY(0, y, event, attr, STR_FADEOUT, phase->fadeOut);
         break;
 
-#if defined(GVARS) && !defined(CPUM64)
+#if defined(GVARS) && !defined(PCBSTD)
       case ITEM_MODEL_PHASE_GVARS_LABEL:
         lcd_putsLeft(y, STR_GLOBAL_VARS);
         break;
@@ -1717,8 +1717,7 @@ void menuModelHeli(uint8_t event)
 
   for (uint8_t i=0; i<6; i++) {
     uint8_t y = 1 + 1*FH + i*FH;
-    uint8_t attr = (sub == i ? INVERS : 0);
-
+    uint8_t attr = (sub == i ? ((s_editMode>0) ? BLINK|INVERS : INVERS) : 0);
     switch(i) {
       case ITEM_HELI_SWASHTYPE:
         g_model.swashR.type = selectMenuItem(HELI_PARAM_OFS, y, STR_SWASHTYPE, STR_VSWASHTYPE, g_model.swashR.type, 0, SWASH_TYPE_NUM, attr, event);
@@ -2277,7 +2276,7 @@ void menuModelMixOne(uint8_t event)
 
   TITLE(s_currCh ? STR_INSERTMIX : STR_EDITMIX);
   MixData *md2 = mixaddress(s_currIdx) ;
-  putsChn(lcdLastPos+1*FW,0,md2->destCh+1,0);
+  putsChn(lcdLastPos+1*FW, 0, md2->destCh+1,0);
 
 #if defined(ROTARY_ENCODERS)
 #if defined(CURVES)
@@ -3051,7 +3050,7 @@ void menuModelLimits(uint8_t event)
 
 void menuModelCurvesAll(uint8_t event)
 {
-#if defined(GVARS) && defined(CPUM64)
+#if defined(GVARS) && defined(PCBSTD)
   SIMPLE_MENU(STR_MENUCURVES, menuTabModel, e_CurvesAll, 1+MAX_CURVES+MAX_GVARS);
 #else
   SIMPLE_MENU(STR_MENUCURVES, menuTabModel, e_CurvesAll, 1+MAX_CURVES);
@@ -3078,7 +3077,7 @@ void menuModelCurvesAll(uint8_t event)
     uint8_t y = 1 + FH + i*FH;
     uint8_t k = i + s_pgOfs;
     uint8_t attr = (sub == k ? INVERS : 0);
-#if defined(GVARS) && defined(CPUM64)
+#if defined(GVARS) && defined(PCBSTD)
     if (k < MAX_CURVES) {
       putsStrIdx(0, y, STR_CV, k+1, attr);
     }
@@ -3808,7 +3807,9 @@ enum menuModelTelemetryItems {
   ITEM_TELEMETRY_RSSI_ALARM2,
 #if defined(FRSKY_HUB) || defined(WS_HOW_HIGH)
   ITEM_TELEMETRY_USR_LABEL,
+#if !defined(PCBTARANIS)
   ITEM_TELEMETRY_USR_PROTO,
+#endif
   ITEM_TELEMETRY_USR_BLADES,
 #endif
   ITEM_TELEMETRY_USR_VOLTAGE_SOURCE,
@@ -3836,10 +3837,12 @@ enum menuModelTelemetryItems {
   ITEM_TELEMETRY_MAX
 };
 
-#if defined(FRSKY_HUB) || defined(WS_HOW_HIGH)
-#define USRDATA_LINES (uint8_t)-1, 0, 0,
+#if defined(PCBTARANIS)
+  #define USRDATA_LINES (uint8_t)-1, 0,
+#elif defined(FRSKY_HUB) || defined(WS_HOW_HIGH)
+  #define USRDATA_LINES (uint8_t)-1, 0, 0,
 #else
-#define USRDATA_LINES
+  #define USRDATA_LINES
 #endif
 
 #if defined(FRSKY)
@@ -3990,11 +3993,13 @@ void menuModelTelemetry(uint8_t event)
         lcd_putsLeft(y, STR_USRDATA);
         break;
 
+#if !defined(PCBTARANIS)
       case ITEM_TELEMETRY_USR_PROTO:
         lcd_putsLeft(y, STR_PROTO);
         lcd_putsiAtt(TELEM_COL2, y, STR_VTELPROTO, g_model.frsky.usrProto, attr);
         if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.frsky.usrProto, USR_PROTO_LAST);
         break;
+#endif
 
       case ITEM_TELEMETRY_USR_BLADES:
         lcd_putsLeft(y, STR_BLADES);

src/menus.cpp

@@ -36,7 +36,7 @@
 
 #include "opentx.h"
 
-pgofs_t s_pgOfs;
+vertpos_t s_pgOfs;
 int8_t s_editMode;
 uint8_t s_noHi;
 uint8_t s_noScroll;
@@ -675,8 +675,8 @@ bool check(check_event_t event, uint8_t curr, const MenuFuncP *menuTab, uint8_t
 
   uint8_t max = menuTab ? LCD_LINES-1 : LCD_LINES-2;
   if (l_posVert<1) s_pgOfs=0;
-  else if (l_posVert-s_pgOfs>max) s_pgOfs = l_posVert-max;
-  else if (l_posVert-s_pgOfs<1) s_pgOfs = l_posVert-1;
+  else if (l_posVert>max+s_pgOfs) s_pgOfs = l_posVert-max;
+  else if (l_posVert<1+s_pgOfs) s_pgOfs = l_posVert-1;
   m_posVert = l_posVert;
   m_posHorz = l_posHorz;
 #if !defined(CPUM64)

src/menus.h

@@ -73,13 +73,24 @@ inline void displayColumnHeader(const char **headers, uint8_t index)
 #define lcd_putsColumnLeft(x, y, str) lcd_putsLeft(y, str)
 #endif
 
+// Menus related stuff ...
 #if defined(SDCARD)
-typedef uint16_t pgofs_t;
+  typedef uint16_t vertpos_t;
 #else
-typedef uint8_t pgofs_t;
+  typedef uint8_t vertpos_t;
 #endif
 
-extern pgofs_t s_pgOfs;
+#if defined(PCBTARANIS)
+  typedef uint8_t & check_event_t;
+  #define horzpos_t int8_t
+#else
+  typedef uint8_t check_event_t;
+  #define horzpos_t uint8_t
+#endif
+
+extern vertpos_t m_posVert;
+extern horzpos_t m_posHorz;
+extern vertpos_t s_pgOfs;
 extern uint8_t s_noHi;
 extern uint8_t s_noScroll;
 
@@ -173,24 +184,6 @@ int8_t checkIncDecGen(uint8_t event, int8_t i_val, int8_t i_min, int8_t i_max);
 #define CHECK_INCDEC_GENVAR(event, var, min, max) \
   var = checkIncDecGen(event,var,min,max)
 
-// Menus related stuff ...
-#if defined(SDCARD)
-  #define vertpos_t uint16_t
-#else
-  #define vertpos_t uint8_t
-#endif
-
-#if defined(PCBTARANIS)
-  typedef uint8_t & check_event_t;
-  #define horzpos_t int8_t
-#else
-  typedef uint8_t check_event_t;
-  #define horzpos_t uint8_t
-#endif
-
-extern vertpos_t m_posVert;
-extern horzpos_t m_posHorz;
-
 #if defined(PCBTARANIS)
   #define NAVIGATION_LINE_BY_LINE  0x40
 #else

src/myeeprom.h

@@ -52,35 +52,36 @@
 #define BEEP_VAL     ( (g_eeGeneral.warnOpts & WARN_BVAL_BIT) >>3 )
 
 #if defined(PCBTARANIS)
-#define EEPROM_VER       214
+  #define EEPROM_VER       214
 #elif defined(PCBSKY9X)
-#define EEPROM_VER       214
-#elif defined(PCBGRUVIN9X) || defined(CPUM128)
-#define EEPROM_VER       214
+  #define EEPROM_VER       214
+#elif defined(PCBGRUVIN9X)
+  #define EEPROM_VER       214
+#elif defined(CPUM128)
+  #define EEPROM_VER       215
 #else
-#define EEPROM_VER       213
+  #define EEPROM_VER       213
 #endif
 
 #ifndef PACK
 #define PACK( __Declaration__ ) __Declaration__ __attribute__((__packed__))
 #endif
 
-
 typedef int16_t gvar_t;
 
-#if !defined(CPUM64)
+#if !defined(PCBSTD)
 typedef char gvar_name_t[6];
 #define GVAR_MAX  1024
 #endif
 
 #define RESERVE_RANGE_FOR_GVARS 10
 // even we do not spend space in EEPROM for 10 GVARS, we reserve the space inside the range of values, like offset, weight, etc.
-#if defined(CPUM64) && defined(GVARS)
+#if defined(PCBSTD) && defined(GVARS)
   #define MAX_GVARS 5
   #define MODEL_GVARS_DATA gvar_t gvars[MAX_GVARS];
   #define PHASE_GVARS_DATA
   #define GVAR_VALUE(x, p) g_model.gvars[x]
-#elif defined(CPUM64)
+#elif defined(PCBSTD)
   #define MAX_GVARS 0
   #define MODEL_GVARS_DATA
   #define PHASE_GVARS_DATA
@@ -252,7 +253,7 @@ PACK(typedef struct t_ExpoData {
   char    name[LEN_EXPOMIX_NAME];
   int8_t  curveParam;
 }) ExpoData;
-#elif defined(CPUM64)
+#elif defined(PCBSTD)
 PACK(typedef struct t_ExpoData {
   uint8_t mode:2;         // 0=end, 1=pos, 2=neg, 3=both
   int8_t  swtch:6;
@@ -354,7 +355,7 @@ PACK( union u_int8int16_t {
 #define DELAY_MAX   15 /* 7.5 seconds */
 #define SLOW_MAX    15 /* 7.5 seconds */
 
-#if defined(CPUM64)
+#if defined(PCBSTD)
 PACK(typedef struct t_MixData {
   uint8_t destCh:4;          // 0, 1..NUM_CHNOUT
   uint8_t curveMode:1;       // O=curve, 1=differential
@@ -823,7 +824,7 @@ PACK(typedef struct t_SwashRingData { // Swash Ring data
 #define ROTARY_ENCODER_ARRAY_EXTRA
 #endif
 
-#if defined(CPUM64)
+#if defined(PCBSTD)
 #define TRIM_ARRAY int8_t trim[4]; int8_t trim_ext:8
 #else
 #define TRIM_ARRAY int16_t trim[4]
@@ -859,7 +860,7 @@ PACK(typedef struct t_PhaseData {
   #define MAX_EXPOS  32
   #define NUM_CSW    32 // number of custom switches
   #define NUM_CFN    32 // number of functions assigned to switches
-#elif defined(PCBGRUVIN9X) || defined(CPUM128)
+#elif defined(PCBGRUVIN9X)
   #define MAX_MODELS 30
   #define NUM_CHNOUT 16 // number of real output channels CH1-CH16
   #define MAX_PHASES 6
@@ -867,6 +868,14 @@ PACK(typedef struct t_PhaseData {
   #define MAX_EXPOS  16
   #define NUM_CSW    15 // number of custom switches
   #define NUM_CFN    24 // number of functions assigned to switches
+#elif defined(CPUM128)
+  #define MAX_MODELS 30
+  #define NUM_CHNOUT 16 // number of real output channels CH1-CH16
+  #define MAX_PHASES 5
+  #define MAX_MIXERS 32
+  #define MAX_EXPOS  14
+  #define NUM_CSW    15 // number of custom switches
+  #define NUM_CFN    24 // number of functions assigned to switches
 #else
   #define MAX_MODELS 16
   #define NUM_CHNOUT 16 // number of real output channels CH1-CH16
@@ -952,7 +961,7 @@ enum SwitchSources {
   SWSRC_FIRST_MOMENT_SWITCH,
   SWSRC_LAST_MOMENT_SWITCH = SWSRC_FIRST_MOMENT_SWITCH+SWSRC_ON-1,
 
-#if !defined(CPUM64)
+#if !defined(PCBSTD)
   SWSRC_TRAINER_SHORT,
   SWSRC_TRAINER_LONG,
 #endif
@@ -1142,7 +1151,7 @@ enum FailsafeModes {
 
 #if defined(MAVLINK)
 #define TELEMETRY_DATA MavlinkData mavlink;
-#elif defined(FRSKY) || !defined(CPUM64)
+#elif defined(FRSKY)
 #define TELEMETRY_DATA FrSkyData frsky;
 #else
 #define TELEMETRY_DATA
@@ -1168,7 +1177,7 @@ PACK(typedef struct t_ModelData {
   uint8_t   extendedTrims:1;
   uint8_t   spare1:1;
   int8_t    ppmDelay;
-  BeepANACenter   beepANACenter;        // 1<<0->A1.. 1<<6->A7
+  BeepANACenter beepANACenter;        // 1<<0->A1.. 1<<6->A7
   MixData   mixData[MAX_MIXERS];
   LimitData limitData[NUM_CHNOUT];
   ExpoData  expoData[MAX_EXPOS];
@@ -1177,7 +1186,7 @@ PACK(typedef struct t_ModelData {
   int8_t    points[NUM_POINTS];
   
   CustomSwData customSw[NUM_CSW];
-  CustomFnData  funcSw[NUM_CFN];
+  CustomFnData funcSw[NUM_CFN];
   SwashRingData swashR;
   PhaseData phaseData[MAX_PHASES];
 

src/opentx.cpp

@@ -361,7 +361,14 @@ void generalDefault()
   g_eeGeneral.version  = EEPROM_VER;
   g_eeGeneral.variant = EEPROM_VARIANT;
   g_eeGeneral.contrast = 25;
+
+#if defined(PCBTARANIS)
+  g_eeGeneral.vBatWarn = 65;
+  g_eeGeneral.vBatMin = -30;
+  g_eeGeneral.vBatMax = -40;
+#else
   g_eeGeneral.vBatWarn = 90;
+#endif
 
   for (int i = 0; i < NUM_STICKS+NUM_POTS; ++i) {
     g_eeGeneral.calibMid[i]     = 0x200;
@@ -414,6 +421,10 @@ void modelDefault(uint8_t id)
   modelIds[id] = g_model.modelId = id+1;
   checkModelIdUnique(id);
 #endif
+
+#if defined(PCBTARANIS)
+  g_model.frsky.channels[0].ratio = 132;
+#endif
 }
 
 int16_t intpol(int16_t x, uint8_t idx) // -100, -75, -50, -25, 0, 25 ,50, 75, 100
@@ -659,14 +670,13 @@ void applyExpos(int16_t *anas)
           else
             v = expo(v, GET_GVAR(curveParam, -100, 100, s_perout_flight_phase));
         }
-        int16_t weight=GET_GVAR(ed.weight, 0, 100, s_perout_flight_phase);
-        weight=calc100to256(weight);
+        int16_t weight = GET_GVAR(ed.weight, 0, 100, s_perout_flight_phase);
+        weight = calc100to256(weight);
         v = ((int32_t)v * weight) >> 8;
-        // v = ((int32_t)v * GET_GVAR(ed.weight, 0, 100, s_perout_flight_phase)) / 100;
         anas[cur_chn] = v;
-      } //endif
-    } //endif getSwitch
-  } //endfor
+      }
+    }
+  }
 }
 
 #if !defined(CPUARM)
@@ -1217,7 +1227,7 @@ uint8_t getFlightPhase()
 int16_t getRawTrimValue(uint8_t phase, uint8_t idx)
 {
   PhaseData *p = phaseaddress(phase);
-#if defined(CPUM64)
+#if defined(PCBSTD)
   return (((int16_t)p->trim[idx]) << 2) + ((p->trim_ext >> (2*idx)) & 0x03);
 #else
   return p->trim[idx];
@@ -1232,7 +1242,7 @@ int16_t getTrimValue(uint8_t phase, uint8_t idx)
 void setTrimValue(uint8_t phase, uint8_t idx, int16_t trim)
 {
   PhaseData *p = phaseaddress(phase);
-#if defined(CPUM64)
+#if defined(PCBSTD)
   p->trim[idx] = (int8_t)(trim >> 2);
   p->trim_ext = (p->trim_ext & ~(0x03 << (2*idx))) + (((trim & 0x03) << (2*idx)));
 #else
@@ -1307,7 +1317,7 @@ void incRotaryEncoder(uint8_t idx, int8_t inc)
 uint8_t s_gvar_timer = 0;
 uint8_t s_gvar_last = 0;
 
-#if defined(CPUM64)
+#if defined(PCBSTD)
 int16_t getGVarValue(int16_t x, int16_t min, int16_t max)
 {
   if (GV_IS_GV_VALUE(x,min,max)) {
@@ -1725,7 +1735,7 @@ uint8_t checkTrim(uint8_t event)
 #if defined(GVARS)
 #define TRIM_REUSED() trimGvar[idx] >= 0
     if (TRIM_REUSED()) {
-#if defined(CPUM64)
+#if defined(PCBSTD)
       phase = 0;
 #else
       phase = getGVarFlightPhase(s_perout_flight_phase, trimGvar[idx]);
@@ -2269,7 +2279,7 @@ PLAY_FUNCTION(playValue, uint8_t idx)
     case MIXSRC_FIRST_TELEM-1+TELEM_MIN_ALT-1:
     case MIXSRC_FIRST_TELEM-1+TELEM_MAX_ALT-1:
 #if defined(WS_HOW_HIGH)
-      if (IS_IMPERIAL_ENABLE() && g_model.frsky.usrProto == USR_PROTO_WS_HOW_HIGH)
+      if (IS_IMPERIAL_ENABLE() && IS_USR_PROTO_WS_HOW_HIGH())
         PLAY_NUMBER(val, 1+UNIT_FEET, 0);
       else
 #endif
@@ -2310,7 +2320,7 @@ PLAY_FUNCTION(playValue, uint8_t idx)
 }
 #endif
 
-#if !defined(CPUM64)
+#if !defined(PCBSTD)
 uint8_t mSwitchDuration[1+NUM_ROTARY_ENCODERS] = { 0 };
 #define CFN_PRESSLONG_DURATION   100
 #endif
@@ -2356,7 +2366,7 @@ void evalFunctions()
       MASK_CFN_TYPE  switch_mask   = ((MASK_CFN_TYPE)1 << i);
       uint8_t momentary = 0;
 
-#if !defined(CPUM64)
+#if !defined(PCBSTD)
 
   #define MOMENTARY_START_TEST() ( (momentary && !(activeSwitches & switch_mask) && active) || \
                                    (short_long==1 && !active && mSwitchDuration[mswitch]>0 && mSwitchDuration[mswitch]<CFN_PRESSLONG_DURATION) || \
@@ -2397,7 +2407,7 @@ void evalFunctions()
       if (active) newActiveSwitches |= switch_mask;
       if (momentary || short_long) {
 
-#if !defined(CPUM64)
+#if !defined(PCBSTD)
         bool swState = active;
 #endif
 
@@ -2428,7 +2438,7 @@ void evalFunctions()
           active = (activeFnSwitches & switch_mask);
           momentary = false;
         }
-#if !defined(CPUM64)
+#if !defined(PCBSTD)
         if (short_long) {
           if (swState) {
             if (mSwitchDuration[mswitch] < 255)
@@ -2448,13 +2458,6 @@ void evalFunctions()
 
       if (active || momentary) {
 
-        if (active)
-          TRACE_DEBUG("ACTIVE ");
-        if (momentary)
-          TRACE_DEBUG("MOMENTARY ");
-
-        TRACE_DEBUG("\n");
-
         if (CFN_ACTIVE(sd)) {
           if (CFN_FUNC(sd) < FUNC_TRAINER) {
             safetyCh[CFN_CH_NUMBER(sd)] = CFN_PARAM(sd);
@@ -2978,7 +2981,8 @@ void perOut(uint8_t mode, uint8_t tick10ms)
       
       if (tmp.dword<0) {
         if ((tmp.words_t.hi&0xFF80)!=0xFF80) tmp.words_t.hi=0xFF86; // set to min nearly
-      } else {
+      }
+      else {
         if ((tmp.words_t.hi|0x007F)!=0x007F) tmp.words_t.hi=0x0079; // set to max nearly
       }
       *ptr=tmp.dword;
@@ -3309,9 +3313,9 @@ void doMixerCalculations()
       AUDIO_INACTIVITY();
 
 #if defined(AUDIO)
-    if (mixWarning & 1) if ((s_timeCumTot&0x03)== 0) AUDIO_MIX_WARNING(1);
-    if (mixWarning & 2) if ((s_timeCumTot&0x03)== 1) AUDIO_MIX_WARNING(2);
-    if (mixWarning & 4) if ((s_timeCumTot&0x03)== 2) AUDIO_MIX_WARNING(3);
+    if (mixWarning & 1) if ((s_timeCumTot&0x03)==0) AUDIO_MIX_WARNING(1);
+    if (mixWarning & 2) if ((s_timeCumTot&0x03)==1) AUDIO_MIX_WARNING(2);
+    if (mixWarning & 4) if ((s_timeCumTot&0x03)==2) AUDIO_MIX_WARNING(3);
 #endif
 
 #if defined(ACCURAT_THROTTLE_TIMER)
@@ -3629,7 +3633,7 @@ uint16_t getTmr16KHz()
 ISR(TIMER2_OVF_vect, ISR_NOBLOCK)
 {
   cli();
-  TIMSK &= ~ (1<<TOIE2) ; // stop reentrance
+  TIMSK &= ~(1<<TOIE2) ; // stop reentrance
   sei();
 
 #if defined(AUDIO)
@@ -3656,7 +3660,7 @@ ISR(TIMER_10MS_VECT, ISR_NOBLOCK)
   AUDIO_HEARTBEAT();
 #endif
 
-#if defined(BUZZER)
+#if defined(BEEPER)
   BUZZER_HEARTBEAT();
 #endif
 
@@ -3785,7 +3789,7 @@ ISR(USART0_UDRE_vect)
   else {
     FRSKY_USART0_vect();
   }
-#elif defined (FRSKY)
+#elif defined(FRSKY)
   FRSKY_USART0_vect();
 #else
   DSM2_USART0_vect();

src/opentx.h

@@ -772,7 +772,7 @@ extern void setTrimValue(uint8_t phase, uint8_t idx, int16_t trim);
 #endif
 
 #if defined(GVARS)
-  #if defined(CPUM64)
+  #if defined(PCBSTD)
     int16_t getGVarValue(int16_t x, int16_t min, int16_t max);
     void setGVarValue(uint8_t x, int8_t value);
     #define GET_GVAR(x, min, max, p) getGVarValue(x, min, max)
@@ -1390,5 +1390,12 @@ void varioWakeup();
   #define IS_IMPERIAL_ENABLE() (0)
 #endif
 
+#if defined(PCBTARANIS)
+  #define IS_USR_PROTO_FRSKY_HUB()   (1)
+  #define IS_USR_PROTO_WS_HOW_HIGH() (0)
+#else
+  #define IS_USR_PROTO_FRSKY_HUB()   (g_model.frsky.usrProto == USR_PROTO_FRSKY)
+  #define IS_USR_PROTO_WS_HOW_HIGH() (g_model.frsky.usrProto == USR_PROTO_WS_HOW_HIGH)
 #endif
 
+#endif

src/simu.cpp

@@ -241,8 +241,8 @@ long Open9xSim::onTimeout(FXObject*,FXSelector,void*)
       KEY_Page_Down, KEY_PAGE,
       KEY_Return,    KEY_ENTER,
       KEY_BackSpace, KEY_EXIT,
-      KEY_Right,     KEY_PLUS,
-      KEY_Left,      KEY_MINUS,
+      KEY_Up,     KEY_PLUS,
+      KEY_Down,      KEY_MINUS,
 #else
       KEY_Return,    KEY_MENU,
       KEY_BackSpace, KEY_EXIT,

src/taranis/adc_driver.cpp

@@ -60,7 +60,7 @@
 
 volatile uint16_t Analog_values[NUMBER_ANALOG];
 #if !defined(REV3)
-const char ana_direction[NUMBER_ANALOG] = {0,1,1,1,  1,0,1,0,  0};
+const char ana_direction[NUMBER_ANALOG] = {0,1,1,1,  1,1,1,0,  0};
 #endif
 
 void adcInit()

src/taranis/usbd_storage_msd.cpp

@@ -28,6 +28,7 @@
 /* Includes ------------------------------------------------------------------*/
 #include "../opentx.h"
 #include "../FatFs/diskio.h"
+#include "board_taranis.h"
 
 extern "C" {
 #include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/misc.h"
@@ -404,7 +405,7 @@ const FATDirEntry_t g_DIRroot[16] =
     {
         { 'T', 'A', 'R', 'A', 'N', 'I', 'S', ' '},
         { 'B', 'I', 'N'},
-        0x26,		// Archive, hidden, system
+        0x24,		// Archive, hidden, system
         0x00,
         0x3E,
         0xA301,
@@ -652,22 +653,27 @@ int32_t fat12Read( uint8_t *buffer, uint16_t sector, uint16_t count )
       eeprom_read_block (buffer, (sector-3)*512, 512);
     }
     buffer += 512 ;
-    sector += 1 ;
-    count -= 1 ;
+    sector++ ;
+    count-- ;
   }
   return 0 ;
 }
 //------------------------------------------------------------------------------
 
 //------------------------------------------------------------------------------
-int32_t fat12Write( const uint8_t *buffer, uint16_t sector, uint32_t count )
+int32_t fat12Write(const uint8_t *buffer, uint16_t sector, uint32_t count )
 {
   // TO DO, actually write to the EEPROM
-  if ( sector > 2 )
+  if ( sector >3 )
   {
-    sector -= 2 ;		// Indexes EEPROM in 512 byte blocks
+    sector -= 4 ;		// Indexes EEPROM in 512 byte blocks
     // Look for a 4K block boundary, writing 4K+
-    
+    while (count) {
+      eeWriteBlockCmp((uint8_t *)buffer, sector*512, 512);
+      buffer+=512;
+      sector++;
+      count--;
+    }  
   }
   return 0 ;
 }

src/telemetry_frsky.cpp

@@ -319,11 +319,11 @@ void processFrskyPacket(uint8_t *packet)
       uint8_t numBytes = 3 + (packet[1] & 0x07); // sanitize in case of data corruption leading to buffer overflow
       for (uint8_t i=3; i<numBytes; i++) {
 #if defined(FRSKY_HUB)
-        if (g_model.frsky.usrProto == USR_PROTO_FRSKY)
+        if (IS_USR_PROTO_FRSKY_HUB())
           parseTelemHubByte(packet[i]);
 #endif
 #if defined(WS_HOW_HIGH)
-        if (g_model.frsky.usrProto == USR_PROTO_WS_HOW_HIGH)
+        if (IS_USR_PROTO_WS_HOW_HIGH())
           parseTelemWSHowHighByte(packet[i]);
 #endif
       }
@@ -474,8 +474,7 @@ ISR(USART0_RX_vect)
   uint8_t data;
   
   UCSR0B &= ~(1 << RXCIE0); // disable Interrupt
-  sei() ;
-
+  sei();
 
   stat = UCSR0A; // USART control and Status Register 0 A
 

src/translations/cz.h

@@ -213,16 +213,23 @@
 #define LEN_VTELEMCHNS         "\004"
 #define TR_VTELEMCHNS          "---\0""Batt""Tmr1""Tmr2""Tx\0 ""Rx\0 ""A1\0 ""A2\0 ""Alt\0""Rpm\0""Fuel""T1\0 ""T2\0 ""Spd\0""Dist""GAlt""Cell""Cels""Vfas""Curr""Cnsp""Powr""AccX""AccY""AccZ""Hdg\0""VSpd""A1-\0""A2-\0""Alt-""Alt+""Rpm+""T1+\0""T2+\0""Spd+""Dst+""Cur+""Acc\0""Time"
 
-#ifdef IMPERIAL_UNITS
-  #define LENGTH_UNIT          "ft\0"
-  #define SPEED_UNIT           "kts"
+#if defined(CPUARM)
+  #define LEN_VTELEMUNIT_NORM  "\003"
+  #define TR_VTELEMUNIT_NORM   "v\0 ""A\0 ""m/s""-\0 ""kmh""m\0 ""@\0 ""%\0 ""mA\0""mAh""W\0 "
+  #define LEN_VTELEMUNIT_IMP   "\003"
+  #define TR_VTELEMUNIT_IMP    "v\0 ""A\0 ""m/s""-\0 ""kts""ft\0""@\0 ""%\0 ""mA\0""mAh""W\0 "
 #else
-  #define LENGTH_UNIT          "m\0 "
-  #define SPEED_UNIT           "kmh"
+  #if defined(IMPERIAL_UNITS)
+    #define LENGTH_UNIT        "ft\0"
+    #define SPEED_UNIT         "kts"
+  #else
+    #define LENGTH_UNIT        "m\0 "
+    #define SPEED_UNIT         "kmh"
+  #endif
+  #define LEN_VTELEMUNIT       "\003"
+  #define TR_VTELEMUNIT        "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #endif
 
-#define LEN_VTELEMUNIT         "\003"
-#define TR_VTELEMUNIT          "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #define STR_V                  (STR_VTELEMUNIT+1)
 #define STR_A                  (STR_VTELEMUNIT+4)
 

src/translations/de.h

@@ -215,16 +215,23 @@
 #define LEN_VTELEMCHNS         "\004"
 #define TR_VTELEMCHNS          "---\0""Batt""Uhr1""Uhr2""Tx\0 ""Rx\0 ""A1\0 ""A2\0 ""H\203he""Umdr""Stof""T1\0 ""T2\0 ""Gesc""Dist""GH\203h""Zell""Zels""Vfas""Strm""Verb""Leis""BesX""BesY""BesZ""Rich""VGes""A1-\0""A2-\0""H\203h-""H\203h+""Umd+""T1+\0""T2+\0""Ges+""Dst+""Str+""Besc""Zeit"
 
-#ifdef IMPERIAL_UNITS
-#define LENGTH_UNIT            "ft\0"
-#define SPEED_UNIT             "kts"
+#if defined(CPUARM)
+  #define LEN_VTELEMUNIT_NORM  "\003"
+  #define TR_VTELEMUNIT_NORM   "v\0 ""A\0 ""m/s""-\0 ""kmh""m\0 ""@\0 ""%\0 ""mA\0""mAh""W\0 "
+  #define LEN_VTELEMUNIT_IMP   "\003"
+  #define TR_VTELEMUNIT_IMP    "v\0 ""A\0 ""m/s""-\0 ""kts""ft\0""@\0 ""%\0 ""mA\0""mAh""W\0 "
 #else
-#define LENGTH_UNIT            "m\0 "
-#define SPEED_UNIT             "kmh"
+  #if defined(IMPERIAL_UNITS)
+    #define LENGTH_UNIT        "ft\0"
+    #define SPEED_UNIT         "kts"
+  #else
+    #define LENGTH_UNIT        "m\0 "
+    #define SPEED_UNIT         "kmh"
+  #endif
+  #define LEN_VTELEMUNIT       "\003"
+  #define TR_VTELEMUNIT        "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #endif
 
-#define LEN_VTELEMUNIT         "\003"
-#define TR_VTELEMUNIT          "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #define STR_V                  (STR_VTELEMUNIT+1)
 #define STR_A                  (STR_VTELEMUNIT+4)
 

src/translations/en.h

@@ -127,7 +127,7 @@
 #define TR_VCURVEFUNC          "---""x>0""x<0""|x|""f>0""f<0""|f|"
 
 #define LEN_VMLTPX             "\010"
-#define TR_VMLTPX              "Add     ""Multiply""Replace "
+#define TR_VMLTPX              "Add\0    ""Multiply""Replace\0"
 
 #define LEN_VMLTPX2            "\002"
 #define TR_VMLTPX2             "+=""*="":="
@@ -273,7 +273,7 @@
 #define TR_VTEMPLATES          "Clear Mixes\0\0""Simple 4-CH \0""Sticky-T-Cut\0""V-Tail      \0""Elevon\\Delta\0""eCCPM       \0""Heli Setup  \0""Servo Test  \0"
 
 #define LEN_VSWASHTYPE         "\004"
-#define TR_VSWASHTYPE          "--- ""120 ""120X""140 ""90\0"
+#define TR_VSWASHTYPE          "---\0""120\0""120X""140\0""90\0"
 
 #define LEN_VKEYS              "\005"
 #define TR_VKEYS               TR(" Menu"" Exit"" Down""   Up""Right"" Left", " Menu"" Exit""Enter"" Page"" Plus""Minus")
@@ -354,7 +354,7 @@
 #define TR_LOADINGMODEL        "Loading model..."
 #define TR_NAME                "Name"
 #define TR_MODELNAME           "Model Name"
-#define TR_PHASENAME           "Phase Name"
+#define TR_PHASENAME           "Mode Name"
 #define TR_MIXNAME             "Mix Name"
 #define TR_EXPONAME            "Expo Name"
 #define TR_BITMAP              "Model Image"
@@ -395,7 +395,7 @@
 #define TR_TRIM                "Trim"
 #define TR_DREX                "DRex"
 #define TR_CURVE               "Curve"
-#define TR_FPHASE              TR("Phase","Phases")
+#define TR_FPHASE              TR("Mode","Modes")
 #define TR_MIXWARNING          "Warning"
 #define TR_OFF                 "OFF"
 #define TR_MULTPX              "Multpx"
@@ -420,14 +420,14 @@
 #define TR_HAPTICSTRENGTH      INDENT"Strength"
 #define TR_CONTRAST            "Contrast"
 #define TR_ALARMS_LABEL        "Alarms"
-#define TR_BATTERY_RANGE       "Battery Range"
+#define TR_BATTERY_RANGE       TR("Battery range","Battery meter range")
 #define TR_BATTERYWARNING      INDENT"Battery Low"
 #define TR_INACTIVITYALARM     INDENT"Inactivity"
 #define TR_MEMORYWARNING       INDENT"Memory Low"
 #define TR_ALARMWARNING        INDENT"Sound Off"
 #define TR_RENAVIG             "RotEnc Navig"
 #define TR_THROTTLEREVERSE     TR("Thr reverse","Throttle reverse")
-#define TR_MINUTEBEEP          TR(INDENT"Minute",INDENT"Every minute")
+#define TR_MINUTEBEEP          TR(INDENT"Minute",INDENT"Minute call")
 #define TR_BEEPCOUNTDOWN       INDENT"Countdown"
 #define TR_PERSISTENT          TR(INDENT"Persist.",INDENT"Persistent")
 #define TR_BACKLIGHT_LABEL     "Backlight"
@@ -473,7 +473,7 @@
 #define TR_PPM                 "PPM"
 #define TR_CH                  "CH"
 #define TR_MODEL               "MODEL"
-#define TR_FP                  "FP"
+#define TR_FP                  "FM"
 #define TR_MIX                 "MIX"
 #define TR_EEPROMLOWMEM        "EEPROM low mem"
 #define TR_ALERT               "\016ALERT"
@@ -494,13 +494,13 @@
 #define TR_TRIMS2OFFSETS       "\006Trims => Offsets"
 #define TR_MENUMODELSEL        TR("MODELSEL","MODEL SELECTION")
 #define TR_MENUSETUP           TR("SETUP","MODEL SETUP")
-#define TR_MENUFLIGHTPHASE     "FLIGHT PHASE"
-#define TR_MENUFLIGHTPHASES    "FLIGHT PHASES"
+#define TR_MENUFLIGHTPHASE     "FLIGHT MODE"
+#define TR_MENUFLIGHTPHASES    "FLIGHT MODES"
 #define TR_MENUHELISETUP       "HELI SETUP"
 
 #if defined(PPM_CENTER_ADJUSTABLE) || defined(PPM_LIMITS_SYMETRICAL) // The right menu titles for the gurus ...
   #define TR_MENUDREXPO        "STICKS"
-  #define TR_MENULIMITS        "OUTPUTS"
+  #define TR_MENULIMITS        "SERVOS"
 #else
   #define TR_MENUDREXPO        "DR/EXPO"
   #define TR_MENULIMITS        "LIMITS"

src/translations/es.h

@@ -213,16 +213,23 @@
 #define LEN_VTELEMCHNS   "\004"
 #define TR_VTELEMCHNS    "---\0""Batt""Tmr1""Tmr2""Tx\0 ""Rx\0 ""A1\0 ""A2\0 ""Alt\0""Rpm\0""Fuel""T1\0 ""T2\0 ""Spd\0""Dist""GAlt""Cell""Cels""Vfas""Curr""Cnsp""Powr""AccX""AccY""AccZ""Hdg\0""VSpd""A1-\0""A2-\0""Alt-""Alt+""Rpm+""T1+\0""T2+\0""Spd+""Dst+""Cur+""Acc\0""Hora"
 
-#ifdef IMPERIAL_UNITS
-  #define LENGTH_UNIT "ft\0"
-  #define SPEED_UNIT  "kts"
+#if defined(CPUARM)
+  #define LEN_VTELEMUNIT_NORM  "\003"
+  #define TR_VTELEMUNIT_NORM   "v\0 ""A\0 ""m/s""-\0 ""kmh""m\0 ""@\0 ""%\0 ""mA\0""mAh""W\0 "
+  #define LEN_VTELEMUNIT_IMP   "\003"
+  #define TR_VTELEMUNIT_IMP    "v\0 ""A\0 ""m/s""-\0 ""kts""ft\0""@\0 ""%\0 ""mA\0""mAh""W\0 "
 #else
-  #define LENGTH_UNIT "m\0 "
-  #define SPEED_UNIT  "kmh"
+  #if defined(IMPERIAL_UNITS)
+    #define LENGTH_UNIT        "ft\0"
+    #define SPEED_UNIT         "kts"
+  #else
+    #define LENGTH_UNIT        "m\0 "
+    #define SPEED_UNIT         "kmh"
+  #endif
+  #define LEN_VTELEMUNIT       "\003"
+  #define TR_VTELEMUNIT        "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #endif
 
-#define LEN_VTELEMUNIT   "\003"
-#define TR_VTELEMUNIT    "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #define STR_V            (STR_VTELEMUNIT+1)
 #define STR_A            (STR_VTELEMUNIT+4)
 

src/translations/fr.h

@@ -227,16 +227,23 @@
 #define LEN_VTELEMCHNS   "\004"
 #define TR_VTELEMCHNS    "---\0""Batt""Chr1""Chr2""Tx\0 ""Rx\0 ""A1\0 ""A2\0 ""Alt\0""Rpm\0""Carb""T1\0 ""T2\0 ""Vit\0""Dist""AltG""Elem""Velm""Vfas""Cour""Cnsm""Puis""AccX""AccY""AccZ""Cap\0""VitV""A1-\0""A2-\0""Alt-""Alt+""Rpm+""T1+\0""T2+\0""Vit+""Dst+""Cur+""Acc\0""Time"
 
-#ifdef IMPERIAL_UNITS
-#define LENGTH_UNIT "ft\0"
-#define SPEED_UNIT  "kts"
+#if defined(CPUARM)
+  #define LEN_VTELEMUNIT_NORM  "\003"
+  #define TR_VTELEMUNIT_NORM   "v\0 ""A\0 ""m/s""-\0 ""kmh""m\0 ""@\0 ""%\0 ""mA\0""mAh""W\0 "
+  #define LEN_VTELEMUNIT_IMP   "\003"
+  #define TR_VTELEMUNIT_IMP    "v\0 ""A\0 ""m/s""-\0 ""kts""ft\0""@\0 ""%\0 ""mA\0""mAh""W\0 "
 #else
-#define LENGTH_UNIT "m\0 "
-#define SPEED_UNIT  "kmh"
+  #if defined(IMPERIAL_UNITS)
+    #define LENGTH_UNIT        "ft\0"
+    #define SPEED_UNIT         "kts"
+  #else
+    #define LENGTH_UNIT        "m\0 "
+    #define SPEED_UNIT         "kmh"
+  #endif
+  #define LEN_VTELEMUNIT       "\003"
+  #define TR_VTELEMUNIT        "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #endif
 
-#define LEN_VTELEMUNIT   "\003"
-#define TR_VTELEMUNIT    "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #define STR_V            (STR_VTELEMUNIT+1)
 #define STR_A            (STR_VTELEMUNIT+4)
 

src/translations/it.h

@@ -212,16 +212,23 @@
 #define LEN_VTELEMCHNS   "\004"
 #define TR_VTELEMCHNS    "---\0""Batt""Tmr1""Tmr2""Tx\0 ""Rx\0 ""A1\0 ""A2\0 ""Alt\0""Rpm\0""Carb""T1\0 ""T2\0 ""Vel\0""Dist""GAlt""Cell""Cels""Vfas""Curr""Cnsm""Powr""AccX""AccY""AccZ""Dir\0""VelV""A1-\0""A2-\0""Alt-""Alt+""Rpm+""T1+\0""T2+\0""Vel+""Dst+""Cur+""Acc\0""Time"
 
-#ifdef IMPERIAL_UNITS
-#define LENGTH_UNIT "ft\0"
-#define SPEED_UNIT  "kts"
+#if defined(CPUARM)
+  #define LEN_VTELEMUNIT_NORM  "\003"
+  #define TR_VTELEMUNIT_NORM   "v\0 ""A\0 ""m/s""-\0 ""kmh""m\0 ""@\0 ""%\0 ""mA\0""mAh""W\0 "
+  #define LEN_VTELEMUNIT_IMP   "\003"
+  #define TR_VTELEMUNIT_IMP    "v\0 ""A\0 ""m/s""-\0 ""kts""ft\0""@\0 ""%\0 ""mA\0""mAh""W\0 "
 #else
-#define LENGTH_UNIT "m\0 "
-#define SPEED_UNIT  "kmh"
+  #if defined(IMPERIAL_UNITS)
+    #define LENGTH_UNIT        "ft\0"
+    #define SPEED_UNIT         "kts"
+  #else
+    #define LENGTH_UNIT        "m\0 "
+    #define SPEED_UNIT         "kmh"
+  #endif
+  #define LEN_VTELEMUNIT       "\003"
+  #define TR_VTELEMUNIT        "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #endif
 
-#define LEN_VTELEMUNIT   "\003"
-#define TR_VTELEMUNIT    "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #define STR_V            (STR_VTELEMUNIT+1)
 #define STR_A            (STR_VTELEMUNIT+4)
 

src/translations/pt.h

@@ -191,16 +191,23 @@
 #define LEN_VTELEMCHNS   "\004"
 #define TR_VTELEMCHNS    "---\0""Batt""Tmr1""Tmr2""Tx\0 ""Rx\0 ""A1\0 ""A2\0 ""Alt\0""Rpm\0""Fuel""T1\0 ""T2\0 ""Spd\0""Dist""GAlt""Cell""Cels""Vfas""Curr""Cnsp""Powr""AccX""AccY""AccZ""Hdg\0""VVel""A1-\0""A2-\0""Alt-""Alt+""Rpm+""T1+\0""T2+\0""Vel+""Dst+""Cur+""Acc\0""Hora"
 
-#ifdef IMPERIAL_UNITS
-#define LENGTH_UNIT "ft\0"
-#define SPEED_UNIT  "kts"
+#if defined(CPUARM)
+  #define LEN_VTELEMUNIT_NORM  "\003"
+  #define TR_VTELEMUNIT_NORM   "v\0 ""A\0 ""m/s""-\0 ""kmh""m\0 ""@\0 ""%\0 ""mA\0""mAh""W\0 "
+  #define LEN_VTELEMUNIT_IMP   "\003"
+  #define TR_VTELEMUNIT_IMP    "v\0 ""A\0 ""m/s""-\0 ""kts""ft\0""@\0 ""%\0 ""mA\0""mAh""W\0 "
 #else
-#define LENGTH_UNIT "m\0 "
-#define SPEED_UNIT  "kmh"
+  #if defined(IMPERIAL_UNITS)
+    #define LENGTH_UNIT        "ft\0"
+    #define SPEED_UNIT         "kts"
+  #else
+    #define LENGTH_UNIT        "m\0 "
+    #define SPEED_UNIT         "kmh"
+  #endif
+  #define LEN_VTELEMUNIT       "\003"
+  #define TR_VTELEMUNIT        "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #endif
 
-#define LEN_VTELEMUNIT   "\003"
-#define TR_VTELEMUNIT    "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #define STR_V            (STR_VTELEMUNIT+1)
 #define STR_A            (STR_VTELEMUNIT+4)
 

src/translations/se.h

@@ -227,16 +227,23 @@
 #define LEN_VTELEMCHNS         "\004"
 #define TR_VTELEMCHNS          "---\0""Batt""Tmr1""Tmr2""Tx\0 ""Rx\0 ""A1\0 ""A2\0 ""H\202jd""Varv""Tank""T1\0 ""T2\0 ""Fart""Avst""GHjd""Batt""Cels""Vfas""Curr""Cnsp""Powr""AccX""AccY""AccZ""Hdg\0""VFrt""A1-\0""A2-\0""Hjd-""Hjd+""Rpm+""T1+\0""T2+\0""Frt+""Avs+""Cur+""Acc\0""Tid\0"
 
-#ifdef IMPERIAL_UNITS
-  #define LENGTH_UNIT          "fot"
-  #define SPEED_UNIT           "knp"
+#if defined(CPUARM)
+  #define LEN_VTELEMUNIT_NORM  "\003"
+  #define TR_VTELEMUNIT_NORM   "v\0 ""A\0 ""m/s""-\0 ""kmh""m\0 ""@\0 ""%\0 ""mA\0""mAh""W\0 "
+  #define LEN_VTELEMUNIT_IMP   "\003"
+  #define TR_VTELEMUNIT_IMP    "v\0 ""A\0 ""m/s""-\0 ""kts""ft\0""@\0 ""%\0 ""mA\0""mAh""W\0 "
 #else
-  #define LENGTH_UNIT          "m\0 "
-  #define SPEED_UNIT           "kmh"
+  #if defined(IMPERIAL_UNITS)
+    #define LENGTH_UNIT        "fot"
+    #define SPEED_UNIT         "knp"
+  #else
+    #define LENGTH_UNIT        "m\0 "
+    #define SPEED_UNIT         "kmh"
+  #endif
+  #define LEN_VTELEMUNIT       "\003"
+  #define TR_VTELEMUNIT        "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #endif
 
-#define LEN_VTELEMUNIT         "\003"
-#define TR_VTELEMUNIT          "v\0 ""A\0 ""m/s""-\0 " SPEED_UNIT LENGTH_UNIT "@\0 ""%\0 ""mA\0""mAh""W\0 "
 #define STR_V                  (STR_VTELEMUNIT+1)
 #define STR_A                  (STR_VTELEMUNIT+4)
 
@@ -422,7 +429,7 @@
 #define TR_THROTTLEREVERSE     "Reverserad Gas"
 #define TR_MINUTEBEEP          INDENT"Varje Minut"
 #define TR_BEEPCOUNTDOWN       INDENT"R\201kna Ned"
-#define TR_PERSISTENT          TR("J\201mt p\200 ","INDENT"Alltid P\200")
+#define TR_PERSISTENT          TR("J\201mt p\200 ",INDENT"Alltid P\200")
 #define TR_BACKLIGHT_LABEL     "Belysning"
 #define TR_BLDELAY             INDENT"Av efter"
 #define TR_BLONBRIGHTNESS      INDENT"P\200 Ljusstyrka"

src/translations/tts_cz.cpp

@@ -116,7 +116,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
     number = -number;
   }
 
-  convertUnit(number, unit);
+  if (unit) {
+   unit--;
+   convertUnit(number, unit);
+   if (IS_IMPERIAL_ENABLE()) {
+     if (unit == UNIT_METERS) {
+       unit = UNIT_FEET;
+     }
+   }
+   unit++;
+  }
 
   int8_t mode = MODE(att);
   if (mode > 0) {

src/translations/tts_de.cpp

@@ -106,7 +106,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
     number = -number;
   }
 
-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }
 
   int8_t mode = MODE(att);
   if (mode > 0) {

src/translations/tts_es.cpp

@@ -130,7 +130,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
     number = -number;
   }
 
-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }
 
   int8_t mode = MODE(att);
   if (mode > 0) {

src/translations/tts_fr.cpp

@@ -112,7 +112,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
     number = -number;
   }
 
-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }
 
   int8_t mode = MODE(att);
   if (mode > 0) {

src/translations/tts_it.cpp

@@ -102,7 +102,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
     number = -number;
   }
 
-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }
 
   int8_t mode = MODE(att);
   if (mode > 0) {

src/translations/tts_pt.cpp

@@ -115,7 +115,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
     number = -number;
   }
 
-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }
 
   int8_t mode = MODE(att);
   if (mode > 0) {

src/translations/tts_sk.cpp

@@ -131,7 +131,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
     number = -number;
   }
 
-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }
 
   int8_t mode = MODE(att);
   if (mode > 0) {

src/view_main.cpp

@@ -765,7 +765,7 @@ void menuMainView(uint8_t event)
       }
 #endif // PCBGRUVIN9X && ROTARY_ENCODERS
 
-      // Curstom Switches
+      // Custom Switches
 #if defined(PCBSKY9X)
       for (uint8_t i=0; i<NUM_CSW; i++) {
         int8_t len = getSwitch(SWSRC_SW1+i, 0) ? BAR_HEIGHT : 1;
@@ -779,7 +779,7 @@ void menuMainView(uint8_t event)
 #elif defined(PCBGRUVIN9X)
       for (uint8_t i=0; i<NUM_CSW; i++)
         putsSwitches(2*FW-2 + (i/3)*(4*FW-2) + (i/3>1 ? 3*FW : 0), 4*FH+1 + (i%3)*FH, SWSRC_SW1+i, getSwitch(SWSRC_SW1+i, 0) ? INVERS : 0);
-#elif !defined(CPUM64)
+#elif !defined(PCBSTD)
       for (uint8_t i=0; i<NUM_CSW; i++)
         putsSwitches(2*FW-2 + (i/3)*(4*FW-1), 4*FH+1 + (i%3)*FH, SWSRC_SW1+i, getSwitch(SWSRC_SW1+i, 0) ? INVERS : 0);
 #else
@@ -814,7 +814,7 @@ void menuMainView(uint8_t event)
     s_gvar_timer--;
     s_warning = PSTR("Global Variable");
     displayBox();
-#if defined(CPUM64)
+#if defined(PCBSTD)
     lcd_putsAtt(16+4*FW, 5*FH, PSTR("[\010]"), BOLD);
     lcd_outdezAtt(16+4*FW+4*FW+FW/2, 5*FH, GVAR_VALUE(s_gvar_last, s_perout_flight_phase), BOLD);
 #else

src/view_telemetry.cpp

@@ -207,7 +207,7 @@ void putsTelemetryChannel(xcoord_t x, uint8_t y, uint8_t channel, lcdint_t val,
     case TELEM_ALT-1:
     case TELEM_MIN_ALT-1:
     case TELEM_MAX_ALT-1:
-      if (IS_IMPERIAL_ENABLE() && g_model.frsky.usrProto == USR_PROTO_WS_HOW_HIGH) {
+      if (IS_IMPERIAL_ENABLE() && IS_USR_PROTO_WS_HOW_HIGH()) {
         putsTelemetryValue(x, y, val, UNIT_FEET, att);
         break;
       }
@@ -560,7 +560,7 @@ void menuTelemetryFrsky(uint8_t event)
 #if defined(FRSKY_HUB)
     else if (s_frsky_view == e_frsky_after_flight) {
       uint8_t line=1*FH+1;
-      if (g_model.frsky.usrProto == USR_PROTO_FRSKY) {
+      if (IS_USR_PROTO_FRSKY_HUB()) {
         // Latitude
         lcd_putsLeft(line, STR_LATITUDE);
         displayGpsCoord(line, frskyData.hub.gpsLatitudeNS, frskyData.hub.gpsLatitude_bp, frskyData.hub.gpsLatitude_ap);

util/tts.py

@@ -26,6 +26,8 @@
 
 import os, sys, shutil, platform, subprocess, wave, zipfile
 
+NO_ALTERNATE = 1024
+
 def generate(str, idx, alternate=0):
     result = None
     if "speak" in sys.argv:
@@ -41,7 +43,7 @@ def generate(str, idx, alternate=0):
         elif board == 'sky9x':
             result = idx + ".wav"
         else:
-            if alternate == 0:
+            if alternate >= NO_ALTERNATE:
                 return []
             result = "%04d.wav" % alternate
             
@@ -197,19 +199,19 @@ if __name__ == "__main__":
                                "point four", "point five", "point six",
                                "point seven", "point eight", "point nine"]):
             systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+160+i))
-        for s, f, a in [(u"trim center", "midtrim", 244),
-                        (u"maximum trim reached", "endtrim", 0),
-                        (u"transmitter battery low", "lowbatt", 231),
-                        (u"inactivity alarm", "inactiv", 230),
-                        (u"throttle warning", "thralert", 232),
-                        (u"switch warning", "swalert", 233),
-                        (u"Welcome to open nine ex!", "tada", 245),
-                        (u"tick. tock", "timerlt3", 250),
-                        (u"ten. seconds", "timer10", 251),
-                        (u"twenty. seconds", "timer20", 252),
-                        (u"thirty. seconds", "timer30", 253),
+        for s, f, a in [(u"trim center", "midtrim", 494),
+                        (u"maximum trim reached", "endtrim", NO_ALTERNATE),
+                        (u"transmitter battery low", "lowbatt", 481),
+                        (u"inactivity alarm", "inactiv", 480),
+                        (u"throttle warning", "thralert", 482),
+                        (u"switch warning", "swalert", 483),
+                        (u"Welcome to open nine ex!", "tada", 495),
+                        (u"tick. tock", "timerlt3", 500),
+                        (u"ten. seconds", "timer10", 501),
+                        (u"twenty. seconds", "timer20", 502),
+                        (u"thirty. seconds", "timer30", 503),
                        ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
         for i, (s, f) in enumerate([
                      (u"gear!, up!", "gearup"),
                      (u"gear!, down!", "geardn"),
@@ -307,23 +309,23 @@ if __name__ == "__main__":
             systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+103+i))
         for i, s in enumerate(["volt", "amper", "meetri per secondo", "", "chilomeetri ora", "meetri", "gradi", "percento", "milliamper", "milliamper ora", "watt", "db", "piedi", "nodi", "ore", "minuti", "secondi", "R P M", "g"]):
             systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+113+i))            
-        for s, f, a in [(u"radio inattiva controllare", "inactiv", 230),
-                        (u"batteria della radio scarica", "lowbatt", 231),
-                        (u"controllo motore non in posizione, verificare", "thralert", 232),
-                        (u"interruttori non in posizione, verificare", "swalert", 233),
-                        (u"eeprom corrotta", "eebad", 0),
-                        (u"formattazone eeprom in corso", "eeformat", 0),
-                        (u"errore", "error", 0),
-                        (u"trim centrato", "midtrim", 244),
-                        (u"tada", "tada", 245),
-                        (u"potenziometro centrato", "midpot", 246),
-                        (u"massimo trim raggiunto", "endtrim", 0),
-                        (u"3 secondi al termine", "timerlt3", 250),
-                        (u"dieci secondi", "timer10", 251),
-                        (u"venti secondi", "timer20", 252),
-                        (u"trenta secondi", "timer30", 253),
+        for s, f, a in [(u"radio inattiva controllare", "inactiv", 480),
+                        (u"batteria della radio scarica", "lowbatt", 481),
+                        (u"controllo motore non in posizione, verificare", "thralert", 482),
+                        (u"interruttori non in posizione, verificare", "swalert", 483),
+                        (u"eeprom corrotta", "eebad", NO_ALTERNATE),
+                        (u"formattazone eeprom in corso", "eeformat", NO_ALTERNATE),
+                        (u"errore", "error", NO_ALTERNATE),
+                        (u"trim centrato", "midtrim", 494),
+                        (u"tada", "tada", 495),
+                        (u"potenziometro centrato", "midpot", 496),
+                        (u"massimo trim raggiunto", "endtrim", NO_ALTERNATE),
+                        (u"3 secondi al termine", "timerlt3", 500),
+                        (u"dieci secondi", "timer10", 501),
+                        (u"venti secondi", "timer20", 502),
+                        (u"trenta secondi", "timer30", 503),
                      ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
         for i, s in enumerate(["timer", "timer",  "trasmissione", "ricezione", "A1", "A2", "altitudine", "motore",
                                "carburante", "temperatura", "temperatura", "velocita'", "distanza", "altitudine", "cella lipo",
                                "totale lipo", "tensione", "corrente", "consumo", "potenza", "accelerazione X", "accellerazione Y", "accelerazione Z",
@@ -376,23 +378,23 @@ if __name__ == "__main__":
             systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+102+i))
         for i, s in enumerate(["Volt", "Ampere", "Meter pro sekunde", "", "kilometer pro stunde", "Meter", "Grad", "Prozent", "Milliampere", "Milliampere pro stunde", "Watt", "db", "Fuesse", "Knoten", "Uhr", "Minuten", "Secunden", "R P M", "g"]):
             systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+110+i))            
-        for s, f, a in [(u"Sender ist inaktiv,bitte Ueberpruefen Sie", "inactiv", 230),
-                        (u"Senderakku niedrig", "lowbatt", 231),
-                        (u"Gaskanal nicht Null, bitte pruefen", "thralert", 232),
-                        (u"Schalten fehlpositioniert, bitte pruefen", "swalert", 233),
-                        (u"Das EEPROM ist fehlerhaft", "eebad", 0),
-                        (u"Das EEPROM ist immer formatiert", "eeformat", 0),
-                        (u"fehler", "error", 0),
-                        (u"Trim zentriert", "midtrim", 244),
-                        (u"tada", "tada", 245),
-                        (u"Poti zentriert", "midpot", 246),
-                        (u"Maximale trimmung erreicht", "endtrim", 0),
-                        (u"Noch drei sekunden", "timerlt3", 250),
-                        (u"10 sekunden", "timer10", 251),
-                        (u"20 sekunden", "timer20", 252),
-                        (u"30 sekunden", "timer30", 253),
+        for s, f, a in [(u"Sender ist inaktiv,bitte Ueberpruefen Sie", "inactiv", 480),
+                        (u"Senderakku niedrig", "lowbatt", 481),
+                        (u"Gaskanal nicht Null, bitte pruefen", "thralert", 482),
+                        (u"Schalten fehlpositioniert, bitte pruefen", "swalert", 483),
+                        (u"Das EEPROM ist fehlerhaft", "eebad", NO_ALTERNATE),
+                        (u"Das EEPROM ist immer formatiert", "eeformat", NO_ALTERNATE),
+                        (u"fehler", "error", NO_ALTERNATE),
+                        (u"Trim zentriert", "midtrim", 494),
+                        (u"tada", "tada", 495),
+                        (u"Poti zentriert", "midpot", 496),
+                        (u"Maximale trimmung erreicht", "endtrim", NO_ALTERNATE),
+                        (u"Noch drei sekunden", "timerlt3", 500),
+                        (u"10 sekunden", "timer10", 501),
+                        (u"20 sekunden", "timer20", 502),
+                        (u"30 sekunden", "timer30", 503),
                      ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
         for i, s in enumerate(["Timer", "Timer",  "Sendung", "Empfang", "A1", "A2", "Hoehe", "Motor",
                                "Treibstoff", "Temperatur", "Temperatur", "Geschwindigkeit", "Ferne", "Hoehe", "Lipo-Zelle",
                                "Zellen gesamt", "Spannung", "Strom", "Verbrauch", "Power", "Beschleunigung X", "Beschleunigung Y", "Beschleunigung Z",
@@ -454,23 +456,23 @@ if __name__ == "__main__":
             systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+111+i))
         for i, s in enumerate([u"Volt", u"ampére", u"metros por segundo", u"", u"quilômetros por hora", u"metros", u"graus", u"cento", u"miliamperes", u"miliamperes por hora", u"watt", u"db", u"pés", u"nós", u"horas", u"minutos", u"segundos", u"RPM", u"g"]):
             systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+122+i))            
-        for s, f, a in [(u"atenção, o rádio foi esquecido ligado, por favor desligue-o", "inactiv", 230),
-                        (u"bateria do rádio fraca", "lowbatt", 231),
-                        (u"atenção,acelerador não está no mínimo", "thralert", 232),
-                        (u"atenção, certifique-se que os interruptores estão na posição certa", "swalert", 233),
-                        (u"eeprom corrompida", "eebad", 0),
-                        (u"formatação da eeprom em curso", "eeformat", 0),
-                        (u"erro", "error", 0),
-                        (u"trim centrado", "midtrim", 244),
-                        (u"tada", "tada", 245),
-                        (u"potenciómetro centrado", "midpot", 246),
-                        (u"trim no máximo", "endtrim", 0),
-                        (u"3 segundos", "timerlt3", 250),
-                        (u"10 segundos", "timer10", 251),
-                        (u"20 segundos", "timer20", 252),
-                        (u"30 segundos", "timer30", 253),
+        for s, f, a in [(u"atenção, o rádio foi esquecido ligado, por favor desligue-o", "inactiv", 480),
+                        (u"bateria do rádio fraca", "lowbatt", 481),
+                        (u"atenção,acelerador não está no mínimo", "thralert", 482),
+                        (u"atenção, certifique-se que os interruptores estão na posição certa", "swalert", 483),
+                        (u"eeprom corrompida", "eebad", NO_ALTERNATE),
+                        (u"formatação da eeprom em curso", "eeformat", NO_ALTERNATE),
+                        (u"erro", "error", NO_ALTERNATE),
+                        (u"trim centrado", "midtrim", 494),
+                        (u"tada", "tada", 495),
+                        (u"potenciómetro centrado", "midpot", 496),
+                        (u"trim no máximo", "endtrim", NO_ALTERNATE),
+                        (u"3 segundos", "timerlt3", 500),
+                        (u"10 segundos", "timer10", 501),
+                        (u"20 segundos", "timer20", 502),
+                        (u"30 segundos", "timer30", 503),
                      ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
         for i, s in enumerate([u"cronómetro", u"cronómetro", u"transmissão", u"recepção", u"A1", u"A2", u"altitude", u"motor",
                                 u"combustível", u"temperatura", u"temperatura", u"velocidade", u"distância", u"altitude", u"célula lipo"
                                 u"Total lipo", u"tensão", u"corrente", u"consumo", u"potência", u"aceleração X", u"aceleração Y", u"aceleração Z"
@@ -547,19 +549,19 @@ if __name__ == "__main__":
         					   u"gé", u"gé", u"gé", u"gé"]):
             systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+118+i))
             
-        for s, f, a in [(u"střed trimu", "midtrim", 244),
-                        (u"maximum trimu", "endtrim", 0),
-                        (u"baterie rádia je vybitá", "lowbatt", 231),
-                        (u"zapoměl jsi na mě!", "inactiv", 230),
-                        (u"plyn není na nule", "thralert", 232),
-                        (u"přepínače nejsou ve výchozí poloze", "swalert", 233),
-                        (u"tadá", "tada", 245),
-                        (u"ťik ťak", "timerlt3", 250),
-                        (u"deset sekund", "timer10", 251),
-                        (u"dvacet sekund", "timer20", 252),
-                        (u"třicet sekund", "timer30", 253),
+        for s, f, a in [(u"střed trimu", "midtrim", 494),
+                        (u"maximum trimu", "endtrim", NO_ALTERNATE),
+                        (u"baterie rádia je vybitá", "lowbatt", 481),
+                        (u"zapoměl jsi na mě!", "inactiv", 480),
+                        (u"plyn není na nule", "thralert", 482),
+                        (u"přepínače nejsou ve výchozí poloze", "swalert", 483),
+                        (u"tadá", "tada", 495),
+                        (u"ťik ťak", "timerlt3", 500),
+                        (u"deset sekund", "timer10", 501),
+                        (u"dvacet sekund", "timer20", 502),
+                        (u"třicet sekund", "timer30", 503),
                        ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
         for i, (s, f) in enumerate([
                      (u"podvozek je zasunut", "gearup"),
                      (u"podvozek je vysunut", "geardn"),
@@ -599,13 +601,13 @@ if __name__ == "__main__":
         for f, s in systemSounds:
             l = u""
             if board == "sky9x":
-                l += u"9XSOUNDS/SYSTEM;"
+                l += u"SOUNDS/SYSTEM;"
             l += f + u";" + s + u"\n"
             csvFile.write(l.encode("latin-1"))
         for f, s in sounds:
             l = u""
             if board == "sky9x":
-                l += u"9XSOUNDS;"
+                l += u"SOUNDS;"
             l += f + u";" + s + u"\n"
             csvFile.write(l.encode("latin-1"))
         csvFile.close()
@@ -615,13 +617,13 @@ if __name__ == "__main__":
         zip = zipfile.ZipFile(zip_name, "w", zipfile.ZIP_DEFLATED)
         for f, s in systemSounds:
             if board == "sky9x":
-                zip.write(f, "9XSOUNDS/SYSTEM/" + f)
+                zip.write(f, "SOUNDS/SYSTEM/" + f)
             else:
                 zip.write(f, f)
             os.remove(f)
         for f, s in sounds:
             if board == "sky9x":
-                zip.write(f, "9XSOUNDS/" + f)
+                zip.write(f, "SOUNDS/" + f)
             else:
                 zip.write(f, f)
             os.remove(f)