Add myself and Matthias Beyer
to the TODO file as the list of maintainers.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch outsources a chunk of code into an own function and refactors
the variable names inside the new function.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Lüssing says:
====================
bridge: multicast snooping exports #2
Some people pointed out to me that it might be helpful to add stubs for
the newly added multicast exports. That way e.g. batman-adv should continue
to be compile and useable without having to have a kernel compiled
with bridge code in the future. This is what the first patch is supposed
to do.
The second patch adds a third multicast export for the bridge which
e.g. batman-adv is supposed to use, too, soon: Just like the bridge
disables its multicast snooping activities if no querier is present,
batman-adv needs to do the same if bridges are involved.
These three exports should be the final ones needed to marry the bridge
multicast snooping with the batman-adv multicast optimizations recently
added for the 3.15 kernel, allowing to use these optimzations in common
setups having a bridge on top of e.g. bat0, too. So far these bridged
setups would fall back to simple flooding through the batman-adv mesh
network for any multicast packet entering bat0.
More information about the batman-adv multicast optimizations currently
implemented can be found here:
http://www.open-mesh.org/projects/batman-adv/wiki/Basic-multicast-optimizations
The integration on the batman-adv side could afterwards look like this,
for instance (now including the third export):
http://git.open-mesh.org/batman-adv.git/commitdiff/61e4f6af4b7a21ed4040f2e711d50c778e5b6d93?hp=6ae4281474675fbca5bedcf768972a32db586eb6
====================
With this patch other modules are able to ask the bridge whether an
IGMP or MLD querier exists on the according, bridged link layer.
Multicast snooping can only be performed if a valid, selected querier
exists on a link.
Just like the bridge only enables its multicast snooping if a querier
exists, e.g. batman-adv too can only activate its multicast
snooping in bridged scenarios if a querier is present.
For instance this export avoids having to reimplement IGMP/MLD
querier message snooping and parsing in e.g. batman-adv, when
multicast optimizations for bridged scenarios are added in the
future.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make users (e.g. batman-adv soon) load- and runnable even if the
bridge was compiled without snooping capabilities - or even if the
kernel was compiled without any bridge code at all.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a regression bug caused by:
067608e9d0 ("tipc: introduce direct
iovec to buffer chain fragmentation function")
If data is sent on a nonblocking socket and the destination link
is congested, the buffer chain is leaked. We fix this by freeing
the chain in this case.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is otherwise a risk of a possible null pointer dereference.
Was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
This patch removes the `process_done` variable from both
format_eth_hdr_to_stack() and read_bulk_callback() (where it is
declared), as it is not used anywhere (it is set in the
format_eth_hdr_to_stack() function, but afterwards not used).
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The latest vendor code makes changes to uSIFS and uDIFS.
The orginal codes have been rearranged into a fall through switch
statement.
These reduce the time that device allows to TX packets and
improves throughput.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device refuses to associate to older access points even though in
the logs it appears to be associated in tkip or ccmp mode.
Clear bit from key_entry_inuse in pairwise key so the entry is over written
by group address.
This doesn't seem to make any difference to newer access points and
is a temporary fix until a better solution is found.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes a few sparse warnings for missing the 'static' keyword
in array definitions:
drivers/staging//vt6655/rxtx.c:81:22: warning: symbol 'wTimeStampOff' was not declared. Should it be static?
drivers/staging//vt6655/rxtx.c:86:22: warning: symbol 'wFB_Opt0' was not declared. Should it be static?
drivers/staging//vt6655/rxtx.c:90:22: warning: symbol 'wFB_Opt1' was not declared. Should it be static?
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver reports the rate tried in struct vnt_interrupt_data tsr* variables
which is available in INTnsProcessData via interrupt urb context.
Instead of closing apTD tx context in s_nsBulkOutIoCompleteWrite by setting
in_use to false. Keep the context open and allow vnt_int_report_rate to
close it.
If the tx_retry value is correct it will report back the sucessful RATE tried.
struct vnt_usb_send_context add pkt_no which is index of apTD
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Power setting is already done in vnt_config and vnt_tx_packet.
Just check that for connection_channel, if invalid return.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The changing channel is so fast when off channel that changing power is pointless.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The byCurPwr value can change state while in another thread,.
Change to local variable power which is the last set value.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn the radio off to save power is the device is unused
on system.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On 2GHz band the values of wCurrentRate match the idx rates.
However, on 5GHz they do not because in channel.c vnt_rates_a do not
match idx.
Instead use the info->control.rates[0].idx the value that was tried.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver already report low_level_stats via vnt_interrupt_data.
Allow mac80211 to collect them via vnt_get_stats
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>