release 2279

[de language] Remaining PCBX9D ifdef in de translations
[all] Problem with |d|>=ofs and Timer2 in custom switches (thanks thomas9x for all the infos)
2013-04-16 07:01:07 +00:00 · 2013-04-15 19:46:35 +00:00 · 2013-04-15 19:45:36 +00:00 · 2013-04-15 13:48:58 +00:00 · 2013-04-15 12:38:45 +00:00 · 2013-04-15 10:37:23 +00:00
49 changed files with 1650 additions and 967 deletions
@@ -130,9 +130,6 @@ GRAPHICS = YES
 BOLD = YES
 BATTGRAPH = NO

-# THR trace (in STATS screen)
-THR_TRACE = YES
-
 # PPM center adjustable
 # Values = YES, NO
 PPM_CENTER_ADJUSTABLE = NO
@@ -204,9 +201,9 @@ EEPROM_PROGRESS_BAR = NO
 # Values = YES, NO
 DEBUG = NO

-# Flight Phases
+# Flight Modes
 # Values = YES, NO
-FLIGHT_PHASES = YES
+FLIGHT_MODES = YES

 # Curves
 # Values = YES, NO
@@ -239,6 +236,12 @@ ifneq ($(PCB), $(filter $(PCB), STD 9X 9XR STD128 9X128 9XR128 GRUVIN9X MEGA2560
  $(error Sorry, the PCB $(PCB) is not supported yet in openTx)
 endif

+GVARS_VARIANT  = +1 
+FRSKY_VARIANT  = +2
+3POS_VARIANT   = +4
+M128_VARIANT   = +32768
+EEPROM_VARIANT = 0
+
 ifeq ($(PCB), $(filter $(PCB), STD 9X 9XR))
  # 9x/9xr radio
  ARCH = AVR
@@ -247,6 +250,7 @@ ifeq ($(PCB), $(filter $(PCB), STD 9X 9XR))
  OPT = s  
  XCURVES = NO
  SDCARD = NO
+  THR_TRACE = NO
  EXTRAINCDIRS = stock
  CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBSTD -DCPUM64 -DEEPROM_VARIANT=$(shell echo ${EEPROM_VARIANT} | bc)
  BOARDSRC = stock/board_stock.cpp
@@ -264,8 +268,8 @@ ifeq ($(PCB), $(filter $(PCB), STD 9X 9XR))
    CPPDEFS += -DAUDIO
    CPPSRC += audio_avr.cpp
  else
-    CPPDEFS += -DBEEPER
-    CPPSRC += beeper.cpp 
+    CPPDEFS += -DBUZZER
+    CPPSRC += buzzer.cpp 
  endif
  
  ifeq ($(VOICE), YES)
@@ -276,9 +280,11 @@ ifeq ($(PCB), $(filter $(PCB), STD 9X 9XR))
  ifeq ($(PWM_BACKLIGHT), YES)
    ifeq ($(VOICE), YES)
      $(error Sorry, PWM_BACKLIGHT doesnt work on stock board with VOICE mod)
-    else
-      CPPDEFS += -DPWM_BACKLIGHT
    endif
+    ifeq ($(AUDIO), YES)
+      $(error Sorry, PWM_BACKLIGHT doesnt work on stock board with AUDIO mod)
+    endif
+    CPPDEFS += -DPWM_BACKLIGHT
  endif

  ifeq ($(HAPTIC), YES)
@@ -298,7 +304,9 @@ ifeq ($(PCB), $(filter $(PCB), STD128 9X128 9XR128))
  MCU = atmega128
  OPT = 2
  SDCARD = NO
-  CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBSTD -DCPUM128 -DEEPROM_VARIANT=0x8000
+  THR_TRACE = NO
+  EEPROM_VARIANT += ${M128_VARIANT}
+  CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBSTD -DCPUM128 -DEEPROM_VARIANT=$(shell echo ${EEPROM_VARIANT} | bc)
  EXTRAINCDIRS = stock
  BOARDSRC = stock/board_stock.cpp
  EXTRABOARDSRC = stock/lcd_driver.cpp
@@ -315,8 +323,8 @@ ifeq ($(PCB), $(filter $(PCB), STD128 9X128 9XR128))
    CPPDEFS += -DAUDIO
    CPPSRC += audio_avr.cpp
  else
-    CPPDEFS += -DBEEPER
-    CPPSRC += beeper.cpp 
+    CPPDEFS += -DBUZZER
+    CPPSRC += buzzer.cpp 
  endif
  
  ifeq ($(VOICE), YES)
@@ -327,9 +335,11 @@ ifeq ($(PCB), $(filter $(PCB), STD128 9X128 9XR128))
  ifeq ($(PWM_BACKLIGHT), YES)
    ifeq ($(VOICE), YES)
      $(error Sorry, PWM_BACKLIGHT doesnt work on stock board with VOICE mod)
-    else
-      CPPDEFS += -DPWM_BACKLIGHT
    endif
+    ifeq ($(AUDIO), YES)
+      $(error Sorry, PWM_BACKLIGHT doesnt work on stock board with AUDIO mod)
+    endif
+    CPPDEFS += -DPWM_BACKLIGHT
  endif

  ifeq ($(HAPTIC), YES)
@@ -355,7 +365,8 @@ ifeq ($(PCB), GRUVIN9X)
  OPT = 2
  CPPDEFS += -DF_CPU=$(F_CPU)UL -DPCBGRUVIN9X -DEEPROM_VARIANT=0 -DAUDIO -DHAPTIC
  SDCARD = NO
-  BEEPER = NO
+  BUZZER = NO
+  THR_TRACE = YES
  EXTRAINCDIRS = gruvin9x stock FatFs FatFs/option
  BOARDSRC = gruvin9x/board_gruvin9x.cpp
  EXTRABOARDSRC = stock/lcd_driver.cpp
@@ -369,9 +380,9 @@ ifeq ($(PCB), GRUVIN9X)
    EXTRABOARDSRC += FatFs/ff.c FatFs/fattime.c FatFs/option/ccsbcs.c gruvin9x/diskio.cpp
  endif
    
-  ifeq ($(BEEPER), YES)
-    CPPDEFS += -DBEEPER
-    CPPSRC += beeper.cpp
+  ifeq ($(BUZZER), YES)
+    CPPDEFS += -DBUZZER
+    CPPSRC += buzzer.cpp
  endif

  ifeq ($(VOICE), YES)
@@ -393,6 +404,7 @@ ifeq ($(PCB), MEGA2560)
  OPT = 2
  CPPDEFS = -DF_CPU=$(F_CPU)UL -DPCBGRUVIN9X -DEEPROM_VARIANT=0 -DAUDIO -DHAPTIC
  SDCARD = NO
+  THR_TRACE = YES
  EXTRAINCDIRS = gruvin9x stock FatFs FatFs/option
  BOARDSRC = mega2560/board_mega2560.cpp
  EXTRABOARDSRC = mega2560/lcd_driver_ST7565R.cpp
@@ -435,7 +447,8 @@ ifeq ($(PCB), SKY9X)
  MCU  = cortex-m3
  OPT = 2
  SDCARD = YES
-  BEEPER = NO
+  BUZZER = NO
+  THR_TRACE = YES
  CPPDEFS += -DPCBSKY9X -DCPUARM -DEEPROM_VARIANT=0 -DAUDIO -DHAPTIC -DPXX -DDSM2 -DDSM2_PPM -DROTARY_ENCODERS=1
  EXTRAINCDIRS = sky9x CoOS/kernel CoOS/portable
  BOARDSRC = sky9x/board_sky9x.cpp
@@ -457,9 +470,9 @@ ifeq ($(PCB), SKY9X)
    EXTRABOARDSRC += FatFs/ff.c FatFs/fattime.c FatFs/option/ccsbcs.c sky9x/diskio.cpp
  endif
  
-  ifeq ($(BEEPER), YES)
-    CPPDEFS += -DBEEPER
-    CPPSRC += beeper.cpp
+  ifeq ($(BUZZER), YES)
+    CPPDEFS += -DBUZZER
+    CPPSRC += buzzer.cpp
  endif

  ifeq ($(RTCLOCK), YES)
@@ -493,6 +506,7 @@ ifeq ($(PCB), TARANIS)
  OPT = 2
  CPPDEFS += -DHSE_VALUE=12000000
  SDCARD = YES
+  THR_TRACE = YES
  EXT = FRSKY
  CPPDEFS += -DPCBTARANIS -DCPUARM -DEEPROM_VARIANT=0 -DAUDIO -DPXX
  EXTRAINCDIRS = taranis CoOS/kernel CoOS/portable
@@ -592,11 +606,6 @@ CPPDEFS += -DTRANSLATIONS_$(TRANSLATIONS)
 # TTS language
 CPPDEFS += -DTTS_$(TTS)

-GVARS_VARIANT  = +1 
-FRSKY_VARIANT  = +2
-3POS_VARIANT   = +4
-EEPROM_VARIANT = 0
-
 ifeq ($(UNITS), IMPERIAL)
  CPPDEFS += -DIMPERIAL_UNITS
 endif
@@ -660,8 +669,8 @@ ifeq ($(THR_TRACE), YES)
  CPPDEFS += -DTHRTRACE
 endif

-ifeq ($(FLIGHT_PHASES), YES)
-  CPPDEFS += -DFLIGHT_PHASES
+ifeq ($(FLIGHT_MODES), YES)
+  CPPDEFS += -DFLIGHT_MODES
 endif

 ifeq ($(CURVES), YES)
@@ -552,11 +552,11 @@ void AudioQueue::wakeup()
 inline uint8_t getToneLength(uint8_t tLen)
 {
  uint8_t result = tLen; // default
-  if (g_eeGeneral.beeperLength < 0) {
-    result /= (1-g_eeGeneral.beeperLength);
+  if (g_eeGeneral.beepLength < 0) {
+    result /= (1-g_eeGeneral.beepLength);
  }
-  if (g_eeGeneral.beeperLength > 0) {
-    result *= (1+g_eeGeneral.beeperLength);
+  if (g_eeGeneral.beepLength > 0) {
+    result *= (1+g_eeGeneral.beepLength);
  }
  return result;
 }
@@ -711,17 +711,12 @@ void audioEvent(uint8_t e, uint8_t f)
 #endif

  if (e <= AU_ERROR || e >= AU_WARNING1) {
-#if defined(BEEPER)
-    beep();
-#endif
-
    if (g_eeGeneral.alarmsFlash) {
-      if (lightOffCounter < FLASH_DURATION)
-        lightOffCounter = FLASH_DURATION;
+      flashCounter = FLASH_DURATION;
    }
  }

-  if (g_eeGeneral.beeperMode>0 || (g_eeGeneral.beeperMode==0 && e>=AU_TRIM_MOVE) || (g_eeGeneral.beeperMode>=-1 && e<=AU_ERROR)) {
+  if (g_eeGeneral.beepMode>0 || (g_eeGeneral.beepMode==0 && e>=AU_TRIM_MOVE) || (g_eeGeneral.beepMode>=-1 && e<=AU_ERROR)) {
 #if defined(SDCARD)
    if (e < AU_FRSKY_FIRST && isAudioFileAvailable(e, filename)) {
      audioQueue.playFile(filename);
@@ -151,16 +151,13 @@ void codecsInit();
 void audioEvent(uint8_t e, uint8_t f=BEEP_DEFAULT_FREQ);
 void audioStart();

-#define AUDIO_TADA()             audioEvent(AU_TADA)
-#define AUDIO_KEYPAD_UP()        audioEvent(AU_KEYPAD_UP)
-#define AUDIO_KEYPAD_DOWN()      audioEvent(AU_KEYPAD_DOWN)
-#define AUDIO_MENUS()            audioEvent(AU_MENUS)
-#define AUDIO_WARNING1()         audioEvent(AU_WARNING1)
-#define AUDIO_WARNING2()         audioEvent(AU_WARNING2)
-#define AUDIO_TX_BATTERY_LOW()   audioEvent(AU_TX_BATTERY_LOW)
-#define AUDIO_TX_MAH_HIGH()      audioEvent(AU_TX_MAH_HIGH)
-#define AUDIO_TX_TEMP_HIGH()     audioEvent(AU_TX_TEMP_HIGH)
-#define AUDIO_ERROR()            audioEvent(AU_ERROR)
+#if defined(AUDIO) && defined(BUZZER)
+  #define AUDIO_BUZZER(a, b)  do { a; b; } while(0)
+#elif defined(AUDIO)
+  #define AUDIO_BUZZER(a, b)  a
+#else
+  #define AUDIO_BUZZER(a, b)  b
+#endif

 #if defined(VOICE)
  #define AUDIO_ERROR_MESSAGE(e) audioEvent(e)
@@ -170,18 +167,28 @@ void audioStart();
  #define AUDIO_TIMER_MINUTE(t)  audioDefevent(AU_WARNING1)
 #endif

-#define AUDIO_TIMER_30()         audioEvent(AU_TIMER_30)
-#define AUDIO_TIMER_20()         audioEvent(AU_TIMER_20)
-#define AUDIO_TIMER_10()         audioEvent(AU_TIMER_10)
-#define AUDIO_TIMER_LT3(x)       audioEvent(AU_TIMER_LT3)
-#define AUDIO_INACTIVITY()       audioEvent(AU_INACTIVITY)
-#define AUDIO_MIX_WARNING(x)     audioEvent(AU_MIX_WARNING_1+x-1)
-#define AUDIO_POT_STICK_MIDDLE() audioEvent(AU_POT_STICK_MIDDLE)
+#define AUDIO_TADA()             audioEvent(AU_TADA)
+#define AUDIO_KEYPAD_UP()        AUDIO_BUZZER(audioEvent(AU_KEYPAD_UP), beep(0))
+#define AUDIO_KEYPAD_DOWN()      AUDIO_BUZZER(audioEvent(AU_KEYPAD_DOWN), beep(0))
+#define AUDIO_MENUS()            AUDIO_BUZZER(audioEvent(AU_MENUS), beep(0))
+#define AUDIO_WARNING1()         AUDIO_BUZZER(audioEvent(AU_WARNING1), beep(3))
+#define AUDIO_WARNING2()         AUDIO_BUZZER(audioEvent(AU_WARNING2), beep(2))
+#define AUDIO_TX_BATTERY_LOW()   AUDIO_BUZZER(audioEvent(AU_TX_BATTERY_LOW), beep(4))
+#define AUDIO_TX_MAH_HIGH()      audioEvent(AU_TX_MAH_HIGH)
+#define AUDIO_TX_TEMP_HIGH()     audioEvent(AU_TX_TEMP_HIGH)
+#define AUDIO_ERROR()            AUDIO_BUZZER(audioEvent(AU_ERROR), beep(4))
+#define AUDIO_TIMER_30()         AUDIO_BUZZER(audioEvent(AU_TIMER_30), { beepAgain=2; beep(2); })
+#define AUDIO_TIMER_20()         AUDIO_BUZZER(audioEvent(AU_TIMER_20), { beepAgain=1; beep(2); })
+#define AUDIO_TIMER_10()         AUDIO_BUZZER(audioEvent(AU_TIMER_10), beep(2))
+#define AUDIO_TIMER_LT3(x)       AUDIO_BUZZER(audioEvent(AU_TIMER_LT3), beep(2))
+#define AUDIO_INACTIVITY()       AUDIO_BUZZER(audioEvent(AU_INACTIVITY), beep(3))
+#define AUDIO_MIX_WARNING(x)     AUDIO_BUZZER(audioEvent(AU_MIX_WARNING_1+x-1), beep(1))
+#define AUDIO_POT_STICK_MIDDLE() AUDIO_BUZZER(audioEvent(AU_POT_STICK_MIDDLE), beep(2))
 #define AUDIO_VARIO_UP()         audioEvent(AU_KEYPAD_UP)
 #define AUDIO_VARIO_DOWN()       audioEvent(AU_KEYPAD_DOWN)
-#define AUDIO_TRIM_MIDDLE(f)     audioEvent(AU_TRIM_MIDDLE, f)
-#define AUDIO_TRIM_END(f)        audioEvent(AU_TRIM_END, f)
-#define AUDIO_TRIM(event, f)     audioEvent(AU_TRIM_MOVE, f)
+#define AUDIO_TRIM_MIDDLE(f)     AUDIO_BUZZER(audioEvent(AU_TRIM_MIDDLE, f), beep(2))
+#define AUDIO_TRIM_END(f)        AUDIO_BUZZER(audioEvent(AU_TRIM_END, f), beep(2))
+#define AUDIO_TRIM(event, f)     AUDIO_BUZZER(audioEvent(AU_TRIM_MOVE, f), { if (!IS_KEY_FIRST(event)) warble = true; beep(1); })
 #define AUDIO_PLAY(p)            audioEvent(p)
 #define AUDIO_VARIO(f, t)        audioQueue.play(f, t, 0, PLAY_BACKGROUND)

@@ -107,11 +107,11 @@ void audioQueue::heartbeat()
 inline uint8_t audioQueue::getToneLength(uint8_t tLen)
 {
  uint8_t result = tLen; // default
-  if (g_eeGeneral.beeperLength < 0) {
-    result /= (1-g_eeGeneral.beeperLength);
+  if (g_eeGeneral.beepLength < 0) {
+    result /= (1-g_eeGeneral.beepLength);
  }
-  if (g_eeGeneral.beeperLength > 0) {
-    result *= (1+g_eeGeneral.beeperLength);
+  if (g_eeGeneral.beepLength > 0) {
+    result *= (1+g_eeGeneral.beepLength);
  }
  return result;
 }
@@ -168,17 +168,12 @@ void audioQueue::event(uint8_t e, uint8_t f)
 #endif

  if (e <= AU_ERROR || e >= AU_WARNING1) {
-#if defined(BEEPER)
-    beep();
-#endif
-
    if (g_eeGeneral.alarmsFlash) {
-      if (lightOffCounter < FLASH_DURATION)
-        lightOffCounter = FLASH_DURATION;
+      flashCounter = FLASH_DURATION;
    }
  }

-  if (g_eeGeneral.beeperMode>0 || (g_eeGeneral.beeperMode==0 && e>=AU_TRIM_MOVE) || (g_eeGeneral.beeperMode>=-1 && e<=AU_ERROR)) {
+  if (g_eeGeneral.beepMode>0 || (g_eeGeneral.beepMode==0 && e>=AU_TRIM_MOVE) || (g_eeGeneral.beepMode>=-1 && e<=AU_ERROR)) {
    if (e < AU_FRSKY_FIRST || empty()) {
      // TODO when VOICE enable some cases here are not needed!
      switch (e) {
@@ -107,47 +107,46 @@ class audioQueue

 };

-
 extern audioQueue audio;

 void audioDefevent(uint8_t e);

-#define AUDIO_KEYPAD_UP()      audioDefevent(AU_KEYPAD_UP)
-#define AUDIO_KEYPAD_DOWN()    audioDefevent(AU_KEYPAD_DOWN)
-#define AUDIO_MENUS()          audioDefevent(AU_MENUS)
-#define AUDIO_WARNING1()       audioDefevent(AU_WARNING1)
-#define AUDIO_WARNING2()       audioDefevent(AU_WARNING2)
-#define AUDIO_ERROR()          audioDefevent(AU_ERROR)
-
-#if defined(VOICE)
-  #define AUDIO_TADA()           PUSH_SYSTEM_PROMPT(AU_TADA)
-  #define AUDIO_TX_BATTERY_LOW() PUSH_SYSTEM_PROMPT(AU_TX_BATTERY_LOW)
-  #define AUDIO_INACTIVITY()     PUSH_SYSTEM_PROMPT(AU_INACTIVITY)
-  #define AUDIO_ERROR_MESSAGE(e) PUSH_SYSTEM_PROMPT((e))
-  #define AUDIO_TIMER_MINUTE(t)  playDuration(t)
-  #define AUDIO_TIMER_30()       PUSH_SYSTEM_PROMPT(AU_TIMER_30)
-  #define AUDIO_TIMER_20()       PUSH_SYSTEM_PROMPT(AU_TIMER_20)
-  #define AUDIO_TIMER_10()       PUSH_SYSTEM_PROMPT(AU_TIMER_10)
-  #define AUDIO_TIMER_LT3(x)     PUSH_SYSTEM_PROMPT(AU_TIMER_LT3)
+#if defined(AUDIO) && defined(BUZZER)
+  #define AUDIO_BUZZER(a, b)  do { a; b; } while(0)
+#elif defined(AUDIO)
+  #define AUDIO_BUZZER(a, b)  a
 #else
-  #define AUDIO_TADA()
-  #define AUDIO_TX_BATTERY_LOW() audioDefevent(AU_TX_BATTERY_LOW)
-  #define AUDIO_INACTIVITY()     audioDefevent(AU_INACTIVITY)
-  #define AUDIO_ERROR_MESSAGE(e) audioDefevent(AU_ERROR)
-  #define AUDIO_TIMER_MINUTE(t)  audioDefevent(AU_WARNING1)
-  #define AUDIO_TIMER_30()       audioDefevent(AU_TIMER_30)
-  #define AUDIO_TIMER_20()       audioDefevent(AU_TIMER_20)
-  #define AUDIO_TIMER_10()       audioDefevent(AU_TIMER_10)
-  #define AUDIO_TIMER_LT3(x)     audioDefevent(AU_TIMER_LT3)
+  #define AUDIO_BUZZER(a, b)  b
 #endif

-#define AUDIO_MIX_WARNING(x)     audioDefevent(AU_MIX_WARNING_1+x-1)
-#define AUDIO_POT_STICK_MIDDLE() audioDefevent(AU_POT_STICK_MIDDLE)
+#if defined(VOICE)
+  #define VOICE_AUDIO_BUZZER(v, a, b)  v
+#else
+  #define VOICE_AUDIO_BUZZER(v, a, b)  AUDIO_BUZZER(a, b)
+#endif
+
+#define AUDIO_KEYPAD_UP()        AUDIO_BUZZER(audioDefevent(AU_KEYPAD_UP), beep(0))
+#define AUDIO_KEYPAD_DOWN()      AUDIO_BUZZER(audioDefevent(AU_KEYPAD_DOWN), beep(0))
+#define AUDIO_MENUS()            AUDIO_BUZZER(audioDefevent(AU_MENUS), beep(0))
+#define AUDIO_WARNING1()         AUDIO_BUZZER(audioDefevent(AU_WARNING1), beep(3))
+#define AUDIO_WARNING2()         AUDIO_BUZZER(audioDefevent(AU_WARNING2), beep(2))
+#define AUDIO_ERROR()            AUDIO_BUZZER(audioDefevent(AU_ERROR), beep(4))
+#define AUDIO_TADA()             VOICE_AUDIO_BUZZER(PUSH_SYSTEM_PROMPT(AU_TADA),,)
+#define AUDIO_TX_BATTERY_LOW()   VOICE_AUDIO_BUZZER(PUSH_SYSTEM_PROMPT(AU_TX_BATTERY_LOW), audioDefevent(AU_TX_BATTERY_LOW), beep(4))
+#define AUDIO_INACTIVITY()       VOICE_AUDIO_BUZZER(PUSH_SYSTEM_PROMPT(AU_INACTIVITY), audioDefevent(AU_INACTIVITY), beep(3))
+#define AUDIO_ERROR_MESSAGE(e)   VOICE_AUDIO_BUZZER(PUSH_SYSTEM_PROMPT((e)), audioDefevent(AU_ERROR), beep(4))
+#define AUDIO_TIMER_MINUTE(t)    VOICE_AUDIO_BUZZER(playDuration(t), audioDefevent(AU_WARNING1), beep(2))
+#define AUDIO_TIMER_30()         VOICE_AUDIO_BUZZER(PUSH_SYSTEM_PROMPT(AU_TIMER_30), audioDefevent(AU_TIMER_30), { beepAgain=2; beep(2); })
+#define AUDIO_TIMER_20()         VOICE_AUDIO_BUZZER(PUSH_SYSTEM_PROMPT(AU_TIMER_20), audioDefevent(AU_TIMER_20), { beepAgain=1; beep(2); })
+#define AUDIO_TIMER_10()         VOICE_AUDIO_BUZZER(PUSH_SYSTEM_PROMPT(AU_TIMER_10), audioDefevent(AU_TIMER_10), beep(2))
+#define AUDIO_TIMER_LT3(x)       VOICE_AUDIO_BUZZER(PUSH_SYSTEM_PROMPT(AU_TIMER_LT3), audioDefevent(AU_TIMER_LT3), beep(2))
+#define AUDIO_MIX_WARNING(x)     AUDIO_BUZZER(audioDefevent(AU_MIX_WARNING_1+x-1), beep(1))
+#define AUDIO_POT_STICK_MIDDLE() AUDIO_BUZZER(audioDefevent(AU_POT_STICK_MIDDLE), beep(2))
 #define AUDIO_VARIO_UP()         audioDefevent(AU_KEYPAD_UP)
 #define AUDIO_VARIO_DOWN()       audioDefevent(AU_KEYPAD_DOWN)
-#define AUDIO_TRIM_MIDDLE(f)     audio.event(AU_TRIM_MIDDLE, f)
-#define AUDIO_TRIM_END(f)        AUDIO_TRIM_MIDDLE(f)
-#define AUDIO_TRIM(event, f)     audio.event(AU_TRIM_MOVE, f)
+#define AUDIO_TRIM_MIDDLE(f)     AUDIO_BUZZER(audio.event(AU_TRIM_MIDDLE, f), beep(2))
+#define AUDIO_TRIM_END(f)        AUDIO_BUZZER(audioDefevent(f), beep(2))
+#define AUDIO_TRIM(event, f)     AUDIO_BUZZER(audio.event(AU_TRIM_MOVE, f), { if (!IS_KEY_FIRST(event)) warble = true; beep(1); })
 #define AUDIO_PLAY(p)            audio.event(p)
 #define AUDIO_VARIO(f, t)        audio.play(f, t, 0, PLAY_BACKGROUND)

@@ -43,15 +43,6 @@ uint8_t beepOn = false;
 bool warble = false;
 bool warbleC;

-#if defined(AUDIO)
-static const pm_uint8_t beepTab[] PROGMEM = {
-    60, 80, 100, 120, 150,
-};
-void beep()
-{
-  _beep(pgm_read_byte(beepTab+(2+g_eeGeneral.beeperLength)));
-}
-#else
 // The various "beep" tone lengths
 static const pm_uint8_t beepTab[] PROGMEM = {
    // key, trim, warn2, warn1, error
@@ -64,14 +55,16 @@ static const pm_uint8_t beepTab[] PROGMEM = {

 void beep(uint8_t val)
 {
-#if defined(HAPTIC)
+#if defined(HAPTIC) && !defined(AUDIO)
  haptic.event(val==0 ? AU_KEYPAD_UP : (val==4 ? AU_ERROR : AU_TIMER_10+beepAgain));
 #endif

-  if (g_eeGeneral.alarmsFlash && val>1 && lightOffCounter<FLASH_DURATION) lightOffCounter = FLASH_DURATION;
+#if !defined(AUDIO)
+  if (g_eeGeneral.alarmsFlash && val>1) flashCounter = FLASH_DURATION;
+#endif

-  if (g_eeGeneral.beeperMode>0 || (g_eeGeneral.beeperMode==0 && val!=0) || (g_eeGeneral.beeperMode==-1 && val>=3)) {
-    _beep(pgm_read_byte(beepTab+5*(2+g_eeGeneral.beeperLength)+val));
+  if (g_eeGeneral.beepMode>0 || (g_eeGeneral.beepMode==0 && val!=0) || (g_eeGeneral.beepMode==-1 && val>=3)) {
+    _beep(pgm_read_byte(beepTab+5*(2+g_eeGeneral.beepLength)+val));
  }
 }
-#endif
+
@@ -34,8 +34,8 @@
 *
 */

-#ifndef BEEPER_H
-#define BEEPER_H
+#ifndef BUZZER_H
+#define BUZZER_H

 extern uint8_t g_beepCnt;
 extern uint8_t beepAgain;
@@ -47,7 +47,7 @@ extern bool warbleC;
 extern uint8_t hapticTick;
 #endif

-#if defined(CPUARM)
+#if defined(CPUARM) && !defined(SIMU)
 inline void _beep(uint8_t b)
 {
  buzzerSound(b);
@@ -59,11 +59,7 @@ inline void _beep(uint8_t b)
 }
 #endif

-#if defined(AUDIO)
-void beep();
-#else
 void beep(uint8_t val);
-#endif

 #if !defined(AUDIO)
  #if defined(VOICE)
@@ -111,7 +107,7 @@ void beep(uint8_t val);
 #endif

 #if !defined(CPUARM)
-inline void BEEPER_HEARTBEAT()
+inline void BUZZER_HEARTBEAT()
 {
    if(g_beepCnt) {
        if(!beepAgainOrig) {
@@ -813,7 +813,7 @@ bool eeLoadGeneral()
  if (theFile.readRlc((uint8_t*)&g_eeGeneral, 1) == 1 && g_eeGeneral.version == EEPROM_VER) {
    theFile.openRlc(FILE_GENERAL);
    if (theFile.readRlc((uint8_t*)&g_eeGeneral, sizeof(g_eeGeneral)) <= sizeof(EEGeneral)) {
-#if defined(CPUM64)
+#if defined(PCBSTD)
      if (g_eeGeneral.variant == EEPROM_VARIANT && g_eeGeneral.chkSum == evalChkSum()) {
        return true;
      }
@@ -46,9 +46,13 @@ void doMixerCalculations();
  memset(channelOutputs, 0, sizeof(channelOutputs)); \
  memset(ex_chans, 0, sizeof(ex_chans))

+uint16_t anaInValues[NUM_STICKS+NUM_POTS] = { 0 };
 uint16_t anaIn(uint8_t chan)
 {
-  return 0;
+  if (chan < NUM_STICKS+NUM_POTS)
+    return anaInValues[chan];
+  else
+    return 0;
 }

 TEST(Trims, greaterTrimLink)
@@ -299,7 +303,7 @@ TEST(getSwitch, nullSW)
  EXPECT_EQ(getSwitch(0, 0), false);
 }

-TEST(Phases, nullFadeOut_posFadeIn)
+TEST(FlightModes, nullFadeOut_posFadeIn)
 {
  MODEL_RESET();
  g_model.phaseData[1].swtch = SWSRC_ID1;
@@ -309,6 +313,33 @@ TEST(Phases, nullFadeOut_posFadeIn)
  perMain();
 }

+TEST(Mixer, R2029Comment)
+{
+  MODEL_RESET();
+  MIXER_RESET();
+  g_model.mixData[0].destCh = 0;
+  g_model.mixData[0].srcRaw = MIXSRC_CH2;
+  g_model.mixData[0].swtch = -SWSRC_THR;
+  g_model.mixData[0].weight = 100;
+  g_model.mixData[1].destCh = 1;
+  g_model.mixData[1].srcRaw = MIXSRC_Thr;
+  g_model.mixData[1].swtch = SWSRC_THR;
+  g_model.mixData[1].weight = 100;
+  anaInValues[THR_STICK] = 1024;
+  simuSetSwitch(0, 1);
+  perOut(e_perout_mode_normal, 0);
+  EXPECT_EQ(chans[0], 0);
+  EXPECT_EQ(chans[1], 1024*256);
+  simuSetSwitch(0, 0);
+  perOut(e_perout_mode_normal, 0);
+  EXPECT_EQ(chans[0], 0);
+  EXPECT_EQ(chans[1], 0);
+  simuSetSwitch(0, 1);
+  perOut(e_perout_mode_normal, 0);
+  EXPECT_EQ(chans[0], 0);
+  EXPECT_EQ(chans[1], 1024*256);
+}
+
 TEST(Mixer, Cascaded3Channels)
 {
  MODEL_RESET();
@@ -730,11 +730,12 @@ void putsTime(xcoord_t x, uint8_t y, putstime_t tme, LcdFlags att, LcdFlags att2

  qr = div(tme, 60);

-#if defined(CPUARM)
+#if defined(PCBTARANIS)
  if (att & MIDSIZE) {
    div_t qr2 = div(qr.quot, 60);
    LCD_2DOTS(x+2*8-6, y, att);
    lcd_outdezNAtt(x, y, qr2.quot, att|LEADING0|LEFT, 2);
+    qr.quot = qr2.rem;
    x += 2*8+1;
  }
 #define separator ':'
@@ -812,7 +813,7 @@ void putsMixerSource(xcoord_t x, uint8_t y, uint8_t idx, LcdFlags att)
    putsStrIdx(x, y, STR_PPM, idx-MIXSRC_PPM1+1, att);
  else if (idx <= MIXSRC_LAST_CH)
    putsStrIdx(x, y, STR_CH, idx-MIXSRC_CH1+1, att);
-#if defined(GVARS) || !defined(CPUM64)
+#if defined(GVARS) || !defined(PCBSTD)
  else if (idx <= MIXSRC_LAST_GVAR)
    putsStrIdx(x, y, STR_GV, idx-MIXSRC_GVAR1+1, att);
 #endif
@@ -859,7 +860,7 @@ void putsSwitches(xcoord_t x, uint8_t y, int8_t idx, LcdFlags att)
  }
 #endif

-#if !defined(CPUM64)
+#if !defined(PCBSTD)
  else if (idx >= SWSRC_TRAINER_SHORT) {
    idx -= SWSRC_TRAINER_SHORT;
    lcd_putcAtt(x+3*FW, y, (idx & 1) ? CHR_LONG : CHR_SHORT, att);
@@ -884,7 +885,7 @@ void putsSwitches(xcoord_t x, uint8_t y, int8_t idx, LcdFlags att)
  lcd_putsiAtt(x, y, STR_VSWITCHES, idx-1, att);
 }

-#ifdef FLIGHT_PHASES
+#if defined(FLIGHT_MODES)
 void putsFlightPhase(xcoord_t x, uint8_t y, int8_t idx, LcdFlags att)
 {
  if (idx==0) { lcd_putsiAtt(x, y, STR_MMMINV, 0, att); return; }
@@ -116,9 +116,9 @@ enum menuGeneralSetupItems {
  IF_RTCLOCK(ITEM_SETUP_TIME)
  IF_BATTGRAPH(ITEM_SETUP_BATT_RANGE)
  ITEM_SETUP_SOUND_LABEL,
-  IF_AUDIO(ITEM_SETUP_AUDIO_MODE)
-  IF_BEEPER(ITEM_SETUP_BEEPER_MODE)
-  ITEM_SETUP_BEEPER_LENGTH,
+  IF_AUDIO(ITEM_SETUP_BEEP_MODE)
+  IF_BUZZER(ITEM_SETUP_BUZZER_MODE)
+  ITEM_SETUP_BEEP_LENGTH,
  IF_AUDIO(ITEM_SETUP_SPEAKER_PITCH)
  IF_VOICE(ITEM_SETUP_SPEAKER_VOLUME)
  IF_HAPTIC(ITEM_SETUP_HAPTIC_LABEL)
@@ -135,7 +135,6 @@ enum menuGeneralSetupItems {
  ITEM_SETUP_MEMORY_WARNING,
  ITEM_SETUP_ALARM_WARNING,
  IF_ROTARY_ENCODERS(ITEM_SETUP_RE_NAVIGATION)
-  ITEM_SETUP_THROTTLE_REVERSED,
  ITEM_SETUP_BACKLIGHT_LABEL,
  ITEM_SETUP_BACKLIGHT_MODE,
  ITEM_SETUP_BACKLIGHT_DELAY,
@@ -167,7 +166,7 @@ void menuGeneralSetup(uint8_t event)
  }
 #endif

-  MENU(STR_MENURADIOSETUP, menuTabDiag, e_Setup, ITEM_SETUP_MAX+1, {0, IF_RTCLOCK(2) IF_RTCLOCK(2) IF_BATTGRAPH(1) LABEL(SOUND), IF_AUDIO(0) IF_BEEPER(0) 0, IF_AUDIO(0) IF_VOICE(0) IF_HAPTIC(LABEL(HAPTIC)) IF_HAPTIC(0) IF_HAPTIC(0) IF_HAPTIC(0) IF_PCBSKY9X(0) IF_9X(0) LABEL(ALARMS), 0, IF_PCBSKY9X(0) IF_PCBSKY9X(0) 0, 0, 0, IF_ROTARY_ENCODERS(0) 0, LABEL(BACKLIGHT), 0, 0, CASE_PWM_BACKLIGHT(0) CASE_PWM_BACKLIGHT(0) 0, IF_SPLASH(0) IF_FRSKY(0) IF_FRSKY(0) IF_PXX(0) IF_CPUARM(0) 0, LABEL(TX_MODE), CASE_PCBTARANIS(0) 1/*to force edit mode*/});
+  MENU(STR_MENURADIOSETUP, menuTabDiag, e_Setup, ITEM_SETUP_MAX+1, {0, IF_RTCLOCK(2) IF_RTCLOCK(2) IF_BATTGRAPH(1) LABEL(SOUND), IF_AUDIO(0) IF_BUZZER(0) 0, IF_AUDIO(0) IF_VOICE(0) IF_HAPTIC(LABEL(HAPTIC)) IF_HAPTIC(0) IF_HAPTIC(0) IF_HAPTIC(0) IF_PCBSKY9X(0) IF_9X(0) LABEL(ALARMS), 0, IF_PCBSKY9X(0) IF_PCBSKY9X(0) 0, 0, 0, IF_ROTARY_ENCODERS(0) LABEL(BACKLIGHT), 0, 0, CASE_PWM_BACKLIGHT(0) CASE_PWM_BACKLIGHT(0) 0, IF_SPLASH(0) IF_FRSKY(0) IF_FRSKY(0) IF_PXX(0) IF_CPUARM(0) 0, LABEL(TX_MODE), CASE_PCBTARANIS(0) 1/*to force edit mode*/});

  uint8_t sub = m_posVert - 1;

@@ -263,32 +262,32 @@ void menuGeneralSetup(uint8_t event)
        break;

 #if defined(AUDIO)
-      case ITEM_SETUP_AUDIO_MODE:
-        g_eeGeneral.beeperMode = selectMenuItem(RADIO_SETUP_2ND_COLUMN, y, STR_SPEAKER, STR_VBEEPMODE, g_eeGeneral.beeperMode, -2, 1, attr, event);
+      case ITEM_SETUP_BEEP_MODE:
+        g_eeGeneral.beepMode = selectMenuItem(RADIO_SETUP_2ND_COLUMN, y, STR_SPEAKER, STR_VBEEPMODE, g_eeGeneral.beepMode, -2, 1, attr, event);
 #if defined(FRSKY)
        if (attr && checkIncDec_Ret) frskySendAlarms();
 #endif
        break;

-#if defined(BEEPER)
-      case ITEM_SETUP_BEEPER_MODE:
-        g_eeGeneral.alarmsBeep = selectMenuItem(RADIO_SETUP_2ND_COLUMN, y, STR_BEEPER, STR_VBEEPMODE, g_eeGeneral.alarmsBeep, 0, 1, attr, event);
+#if defined(BUZZER)
+      case ITEM_SETUP_BUZZER_MODE:
+        g_eeGeneral.buzzerMode = selectMenuItem(RADIO_SETUP_2ND_COLUMN, y, STR_BUZZER, STR_VBEEPMODE, g_eeGeneral.buzzerMode, -2, 1, attr, event);
 #if defined(FRSKY)
        if (attr && checkIncDec_Ret) frskySendAlarms();
 #endif
        break;
 #endif
 #else
-      case ITEM_SETUP_BEEPER_MODE:
-        g_eeGeneral.beeperMode = selectMenuItem(RADIO_SETUP_2ND_COLUMN, y, STR_SPEAKER, STR_VBEEPMODE, g_eeGeneral.beeperMode, -2, 1, attr, event);
+      case ITEM_SETUP_BUZZER_MODE:
+        g_eeGeneral.beepMode = selectMenuItem(RADIO_SETUP_2ND_COLUMN, y, STR_SPEAKER, STR_VBEEPMODE, g_eeGeneral.beepMode, -2, 1, attr, event);
 #if defined(FRSKY)
        if (attr && checkIncDec_Ret) frskySendAlarms();
 #endif
        break;
 #endif

-      case ITEM_SETUP_BEEPER_LENGTH:
-        SLIDER_5POS(y, g_eeGeneral.beeperLength, STR_LENGTH, event, attr);
+      case ITEM_SETUP_BEEP_LENGTH:
+        SLIDER_5POS(y, g_eeGeneral.beepLength, STR_LENGTH, event, attr);
        break;

 #if defined(AUDIO)
@@ -421,18 +420,14 @@ void menuGeneralSetup(uint8_t event)
        break;
 #endif

-      case ITEM_SETUP_THROTTLE_REVERSED:
-        g_eeGeneral.throttleReversed = onoffMenuItem(g_eeGeneral.throttleReversed, RADIO_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
+      case ITEM_SETUP_BACKLIGHT_LABEL:
+        lcd_putsLeft(y, STR_BACKLIGHT_LABEL);
        break;

      case ITEM_SETUP_BACKLIGHT_MODE:
        g_eeGeneral.backlightMode = selectMenuItem(RADIO_SETUP_2ND_COLUMN, y, STR_MODE, STR_VBLMODE, g_eeGeneral.backlightMode, e_backlight_mode_off, e_backlight_mode_on, attr, event);
        break;

-      case ITEM_SETUP_BACKLIGHT_LABEL:
-        lcd_putsLeft(y, STR_BACKLIGHT_LABEL);
-        break;
-
      case ITEM_SETUP_FLASH_BEEP:
        g_eeGeneral.alarmsFlash = onoffMenuItem(g_eeGeneral.alarmsFlash, RADIO_SETUP_2ND_COLUMN, y, STR_ALARM, attr, event ) ;
        break;
@@ -36,7 +36,7 @@

 #include "opentx.h"

-pgofs_t s_pgOfs;
+vertpos_t s_pgOfs;
 int8_t s_editMode;
 uint8_t s_noHi;
 uint8_t s_noScroll;
@@ -82,6 +82,10 @@ void displayScrollbar(xcoord_t x, uint8_t y, uint8_t h, uint16_t offset, uint16_
 int16_t p1valdiff;
 #endif

+#if defined(NAVIGATION_POT2)
+int8_t p2valdiff;
+#endif
+
 int8_t  checkIncDec_Ret;
 int16_t checkIncDec(uint8_t event, int16_t val, int16_t i_min, int16_t i_max, uint8_t i_flags)
 {
@@ -296,10 +300,8 @@ bool check(check_event_t event, uint8_t curr, const MenuFuncP *menuTab, uint8_t
 #ifdef NAVIGATION_POT2
  // check pot 2 - if changed -> scroll menu
  static int16_t p2valprev;
-  int8_t scrollLR = (p2valprev-calibratedStick[4]) / SCROLL_TH;
-  if (scrollLR) p2valprev = calibratedStick[4];
-#else
-#define scrollLR 0
+  p2valdiff = (p2valprev-calibratedStick[4]) / SCROLL_TH;
+  if (p2valdiff) p2valprev = calibratedStick[4];
 #endif

 #ifdef NAVIGATION_POT3
@@ -311,7 +313,7 @@ bool check(check_event_t event, uint8_t curr, const MenuFuncP *menuTab, uint8_t
 #define scrollUD 0
 #endif

-  if (scrollLR || scrollUD || p1valdiff) backlightOn(); // on keypress turn the light on
+  if (p2valdiff || scrollUD || p1valdiff) backlightOn(); // on keypress turn the light on

  if (menuTab) {
    uint8_t attr = 0;
@@ -345,8 +347,8 @@ bool check(check_event_t event, uint8_t curr, const MenuFuncP *menuTab, uint8_t

      int8_t cc = curr;

-      if (scrollLR) {
-        cc = limit((int8_t)0, (int8_t)(cc - scrollLR), (int8_t)(menuTabSize-1));
+      if (p2valdiff) {
+        cc = limit((int8_t)0, (int8_t)(cc - p2valdiff), (int8_t)(menuTabSize-1));
      }

      switch(event) {
@@ -422,8 +424,8 @@ bool check(check_event_t event, uint8_t curr, const MenuFuncP *menuTab, uint8_t
      l_posHorz = min((uint8_t)l_posHorz, MAXCOL(l_posVert));
    }

-    if (scrollLR && l_posVert>0) {
-      l_posHorz = limit((int8_t)0, (int8_t)((uint8_t)l_posHorz - scrollLR), (int8_t)maxcol);
+    if (p2valdiff && l_posVert>0) {
+      l_posHorz = limit((int8_t)0, (int8_t)((uint8_t)l_posHorz - p2valdiff), (int8_t)maxcol);
    }
  }

@@ -675,8 +677,8 @@ bool check(check_event_t event, uint8_t curr, const MenuFuncP *menuTab, uint8_t

  uint8_t max = menuTab ? LCD_LINES-1 : LCD_LINES-2;
  if (l_posVert<1) s_pgOfs=0;
-  else if (l_posVert-s_pgOfs>max) s_pgOfs = l_posVert-max;
-  else if (l_posVert-s_pgOfs<1) s_pgOfs = l_posVert-1;
+  else if (l_posVert>max+s_pgOfs) s_pgOfs = l_posVert-max;
+  else if (l_posVert<1+s_pgOfs) s_pgOfs = l_posVert-1;
  m_posVert = l_posVert;
  m_posHorz = l_posHorz;
 #if !defined(CPUM64)
@@ -891,7 +893,7 @@ const char * displayMenu(uint8_t event)
  const char * result = NULL;

  uint8_t display_count = min(s_menu_count, (uint16_t)MENU_MAX_LINES);
-  uint8_t y = display_count > 4 ? MENU_Y - FH : MENU_Y;
+  uint8_t y = (display_count >= 5 ? MENU_Y - FH : MENU_Y);
  lcd_filled_rect(MENU_X, y, MENU_W, display_count * (FH+1) + 2, SOLID, ERASE);
  lcd_rect(MENU_X, y, MENU_W, display_count * (FH+1) + 2);

@@ -908,29 +910,39 @@ const char * displayMenu(uint8_t event)
 #if defined(ROTARY_ENCODER_NAVIGATION)
    CASE_EVT_ROTARY_LEFT
 #endif
-    case EVT_KEY_BREAK(KEY_MOVE_UP):
-      if (s_menu_item > 0)
+    case EVT_KEY_FIRST(KEY_MOVE_UP):
+    case EVT_KEY_REPT(KEY_MOVE_UP):
+      if (s_menu_item > 0) {
        s_menu_item--;
+      }
 #if defined(SDCARD)
      else if (s_menu_offset > 0) {
        s_menu_offset--;
        result = STR_UPDATE_LIST;
      }
 #endif
+      else {
+        s_menu_item = display_count - 1;
+      }
      break;

 #if defined(ROTARY_ENCODER_NAVIGATION)
    CASE_EVT_ROTARY_RIGHT
 #endif
-    case EVT_KEY_BREAK(KEY_MOVE_DOWN):
-      if (s_menu_item < display_count - 1 && s_menu_offset + s_menu_item + 1 < s_menu_count)
+    case EVT_KEY_FIRST(KEY_MOVE_DOWN):
+    case EVT_KEY_REPT(KEY_MOVE_DOWN):
+      if (s_menu_item < display_count - 1 && s_menu_offset + s_menu_item + 1 < s_menu_count) {
        s_menu_item++;
+      }
 #if defined(SDCARD)
      else if (s_menu_count > s_menu_offset + display_count) {
        s_menu_offset++;
        result = STR_UPDATE_LIST;
      }
 #endif
+      else {
+        s_menu_item = 0;
+      }
      break;
    CASE_EVT_ROTARY_BREAK
    case EVT_KEY_BREAK(KEY_ENTER):
@@ -73,13 +73,24 @@ inline void displayColumnHeader(const char **headers, uint8_t index)
 #define lcd_putsColumnLeft(x, y, str) lcd_putsLeft(y, str)
 #endif

+// Menus related stuff ...
 #if defined(SDCARD)
-typedef uint16_t pgofs_t;
+  typedef uint16_t vertpos_t;
 #else
-typedef uint8_t pgofs_t;
+  typedef uint8_t vertpos_t;
 #endif

-extern pgofs_t s_pgOfs;
+#if defined(PCBTARANIS)
+  typedef uint8_t & check_event_t;
+  #define horzpos_t int8_t
+#else
+  typedef uint8_t check_event_t;
+  #define horzpos_t uint8_t
+#endif
+
+extern vertpos_t m_posVert;
+extern horzpos_t m_posHorz;
+extern vertpos_t s_pgOfs;
 extern uint8_t s_noHi;
 extern uint8_t s_noScroll;

@@ -122,6 +133,12 @@ void menuStatisticsDebug(uint8_t event);
  #define p1valdiff 0
 #endif

+#if defined(NAVIGATION_POT2)
+  extern int8_t p2valdiff;
+#else
+  #define p2valdiff 0
+#endif
+
 extern int8_t checkIncDec_Ret;  // global helper vars

 #define EDIT_SELECT_MENU   -1
@@ -173,24 +190,6 @@ int8_t checkIncDecGen(uint8_t event, int8_t i_val, int8_t i_min, int8_t i_max);
 #define CHECK_INCDEC_GENVAR(event, var, min, max) \
  var = checkIncDecGen(event,var,min,max)

-// Menus related stuff ...
-#if defined(SDCARD)
-  #define vertpos_t uint16_t
-#else
-  #define vertpos_t uint8_t
-#endif
-
-#if defined(PCBTARANIS)
-  typedef uint8_t & check_event_t;
-  #define horzpos_t int8_t
-#else
-  typedef uint8_t check_event_t;
-  #define horzpos_t uint8_t
-#endif
-
-extern vertpos_t m_posVert;
-extern horzpos_t m_posHorz;
-
 #if defined(PCBTARANIS)
  #define NAVIGATION_LINE_BY_LINE  0x40
 #else
@@ -276,11 +275,6 @@ void displayWarning(uint8_t event);
  #else
    #define MENU_ADD_SD_ITEM(s)
  #endif
-  #if defined(ROTARY_ENCODER_NAVIGATION)
-    #define MENU_ADD_NAVIGATION_ITEM(s) MENU_ADD_ITEM(s)
-  #else
-    #define MENU_ADD_NAVIGATION_ITEM(s)
-  #endif
  #define MENU_LINE_LENGTH (LEN_MODEL_NAME+1)
  extern const char *s_menu[MENU_MAX_LINES];
  extern uint16_t s_menu_count;
@@ -52,35 +52,89 @@
 #define BEEP_VAL     ( (g_eeGeneral.warnOpts & WARN_BVAL_BIT) >>3 )

 #if defined(PCBTARANIS)
-#define EEPROM_VER       214
+  #define EEPROM_VER       214
 #elif defined(PCBSKY9X)
-#define EEPROM_VER       214
-#elif defined(PCBGRUVIN9X) || defined(CPUM128)
-#define EEPROM_VER       214
+  #define EEPROM_VER       214
+#elif defined(PCBGRUVIN9X)
+  #define EEPROM_VER       214
+#elif defined(CPUM128)
+  #define EEPROM_VER       215
 #else
-#define EEPROM_VER       213
+  #define EEPROM_VER       213
 #endif

 #ifndef PACK
 #define PACK( __Declaration__ ) __Declaration__ __attribute__((__packed__))
 #endif

+#if defined(CPUARM)
+  #define MAX_MODELS 60
+  #define NUM_CHNOUT 32 // number of real output channels CH1-CH32
+  #define MAX_PHASES 9
+  #define MAX_MIXERS 64
+  #define MAX_EXPOS  32
+  #define NUM_CSW    32 // number of custom switches
+  #define NUM_CFN    32 // number of functions assigned to switches
+#elif defined(PCBGRUVIN9X)
+  #define MAX_MODELS 30
+  #define NUM_CHNOUT 16 // number of real output channels CH1-CH16
+  #define MAX_PHASES 6
+  #define MAX_MIXERS 32
+  #define MAX_EXPOS  16
+  #define NUM_CSW    15 // number of custom switches
+  #define NUM_CFN    24 // number of functions assigned to switches
+#elif defined(CPUM128)
+  #define MAX_MODELS 30
+  #define NUM_CHNOUT 16 // number of real output channels CH1-CH16
+  #define MAX_PHASES 5
+  #define MAX_MIXERS 32
+  #define MAX_EXPOS  14
+  #define NUM_CSW    15 // number of custom switches
+  #define NUM_CFN    24 // number of functions assigned to switches
+#else
+  #define MAX_MODELS 16
+  #define NUM_CHNOUT 16 // number of real output channels CH1-CH16
+  #define MAX_PHASES 5
+  #define MAX_MIXERS 32
+  #define MAX_EXPOS  14
+  #define NUM_CSW    12 // number of custom switches
+  #define NUM_CFN    16 // number of functions assigned to switches
+#endif
+
+#define MAX_TIMERS 2
+
+#if defined(CPUARM)
+  #define MAX_CURVES 16
+  #define NUM_POINTS 512
+  #define CURVTYPE   int16_t
+#else
+  #define MAX_CURVES 8
+  #define NUM_POINTS (112-MAX_CURVES)
+  #define CURVTYPE   int8_t
+#endif
+
+#if defined(PCBTARANIS)
+  #define NUM_MODULES 2
+#else
+  #define NUM_MODULES 1
+#endif

 typedef int16_t gvar_t;

-#if !defined(CPUM64)
-typedef char gvar_name_t[6];
-#define GVAR_MAX  1024
+#if !defined(PCBSTD)
+  typedef char gvar_name_t[6];
+  #define GVAR_MAX  1024
 #endif

 #define RESERVE_RANGE_FOR_GVARS 10
 // even we do not spend space in EEPROM for 10 GVARS, we reserve the space inside the range of values, like offset, weight, etc.
-#if defined(CPUM64) && defined(GVARS)
+
+#if defined(PCBSTD) && defined(GVARS)
  #define MAX_GVARS 5
  #define MODEL_GVARS_DATA gvar_t gvars[MAX_GVARS];
  #define PHASE_GVARS_DATA
  #define GVAR_VALUE(x, p) g_model.gvars[x]
-#elif defined(CPUM64)
+#elif defined(PCBSTD)
  #define MAX_GVARS 0
  #define MODEL_GVARS_DATA
  #define PHASE_GVARS_DATA
@@ -152,12 +206,20 @@ enum BeeperMode {
  #define EXTRA_GENERAL_FIELDS
 #endif

+PACK(typedef struct t_ModuleData {
+  int8_t  rfProtocol;
+  uint8_t channelsStart;
+  int8_t  channelsCount; // 0=8 channels
+  uint8_t failsafeMode;
+  int16_t failsafeChannels[NUM_CHNOUT];
+}) ModuleData;
+
 #if defined(PCBTARANIS)
-#define MODELDATA_EXTRA   char bitmap[10]; int8_t rfProtocol; uint8_t ppmSCH; uint8_t failsafeMode; int16_t failsafeChannels[16];
+#define MODELDATA_EXTRA   char bitmap[10]; uint8_t externalModule; ModuleData moduleData[NUM_MODULES]; uint8_t trainerMode;
 #define LIMITDATA_EXTRA   char name[6];
 #define swstate_t         uint16_t
 #elif defined(PCBSKY9X)
-#define MODELDATA_EXTRA   uint8_t ppmSCH; int8_t ppm2SCH; int8_t ppm2NCH; int8_t rfProtocol;
+#define MODELDATA_EXTRA   uint8_t ppmSCH; int8_t ppm2SCH; int8_t ppm2NCH; ModuleData moduleData[NUM_MODULES];
 #define LIMITDATA_EXTRA
 #define swstate_t         uint8_t
 #else
@@ -194,28 +256,28 @@ PACK(typedef struct t_EEGeneral {
  int8_t    vBatCalib;
  int8_t    backlightMode;
  TrainerData trainer;
-  uint8_t   view;      //index of subview in main scrren
-  uint8_t   spare1:3;
-  int8_t    beeperMode:2;
+  uint8_t   view;            // index of view in main screen
+  int8_t    buzzerMode:2;    // -2=quiet, -1=only alarms, 0=no keys, 1=all
+  uint8_t   spare1:1;
+  int8_t    beepMode:2;      // -2=quiet, -1=only alarms, 0=no keys, 1=all
  uint8_t   alarmsFlash:1;
  uint8_t   disableMemoryWarning:1;
  uint8_t   disableAlarmWarning:1;
  uint8_t   stickMode:2;
  int8_t    timezone:5;
-  uint8_t   alarmsBeep:1;
+  uint8_t   spare2:1;
  uint8_t   inactivityTimer;
-  uint8_t   throttleReversed:1;
-  uint8_t   spare2:2;
+  uint8_t   spare3:3;
  SPLASH_MODE; /* 3bits */
  int8_t    hapticMode:2;    // -2=quiet, -1=only alarms, 0=no keys, 1=all
  uint8_t   blOffBright:4;
  uint8_t   blOnBright:4;
  uint8_t   lightAutoOff;
-  uint8_t   templateSetup;  //RETA order according to chout_ar array 
+  uint8_t   templateSetup;   // RETA order for receiver channels
  int8_t    PPM_Multiplier;
  int8_t    hapticLength;
-  uint8_t   reNavigation; // not used on STOCK board
-  int8_t    beeperLength:3;
+  uint8_t   reNavigation;    // not used on STOCK board
+  int8_t    beepLength:3;
  uint8_t   hapticStrength:3;
  uint8_t   gpsFormat:1;
  uint8_t   unexpectedShutdown:1;
@@ -252,7 +314,7 @@ PACK(typedef struct t_ExpoData {
  char    name[LEN_EXPOMIX_NAME];
  int8_t  curveParam;
 }) ExpoData;
-#elif defined(CPUM64)
+#elif defined(PCBSTD)
 PACK(typedef struct t_ExpoData {
  uint8_t mode:2;         // 0=end, 1=pos, 2=neg, 3=both
  int8_t  swtch:6;
@@ -287,7 +349,6 @@ PACK(typedef struct t_LimitData {

 }) LimitData;

-
 #define TRIM_OFF    (1)
 #define TRIM_ON     (0)
 #define TRIM_RUD    (-1)
@@ -354,7 +415,7 @@ PACK( union u_int8int16_t {
 #define DELAY_MAX   15 /* 7.5 seconds */
 #define SLOW_MAX    15 /* 7.5 seconds */

-#if defined(CPUM64)
+#if defined(PCBSTD)
 PACK(typedef struct t_MixData {
  uint8_t destCh:4;          // 0, 1..NUM_CHNOUT
  uint8_t curveMode:1;       // O=curve, 1=differential
@@ -823,15 +884,17 @@ PACK(typedef struct t_SwashRingData { // Swash Ring data
 #define ROTARY_ENCODER_ARRAY_EXTRA
 #endif

-#if defined(CPUM64)
-#define TRIM_ARRAY int8_t trim[4]; int8_t trim_ext:8
+#if defined(PCBSTD)
+  #define TRIMS_ARRAY       int8_t trim[4]; int8_t trim_ext:8
+  #define TRIMS_ARRAY_SIZE  5
 #else
-#define TRIM_ARRAY int16_t trim[4]
+  #define TRIMS_ARRAY       int16_t trim[4]
+  #define TRIMS_ARRAY_SIZE  8
 #endif

 #if defined(CPUARM)
 PACK(typedef struct t_PhaseData {
-  TRIM_ARRAY;
+  TRIMS_ARRAY;
  int8_t swtch;       // swtch of phase[0] is not used
  char name[LEN_FP_NAME];
  uint8_t fadeIn;
@@ -841,7 +904,7 @@ PACK(typedef struct t_PhaseData {
 }) PhaseData;
 #else
 PACK(typedef struct t_PhaseData {
-  TRIM_ARRAY;
+  TRIMS_ARRAY;
  int8_t swtch;       // swtch of phase[0] is not used
  char name[LEN_FP_NAME];
  uint8_t fadeIn:4;
@@ -851,44 +914,6 @@ PACK(typedef struct t_PhaseData {
 }) PhaseData;
 #endif

-#if defined(CPUARM)
-  #define MAX_MODELS 60
-  #define NUM_CHNOUT 32 // number of real output channels CH1-CH32
-  #define MAX_PHASES 9
-  #define MAX_MIXERS 64
-  #define MAX_EXPOS  32
-  #define NUM_CSW    32 // number of custom switches
-  #define NUM_CFN    32 // number of functions assigned to switches
-#elif defined(PCBGRUVIN9X) || defined(CPUM128)
-  #define MAX_MODELS 30
-  #define NUM_CHNOUT 16 // number of real output channels CH1-CH16
-  #define MAX_PHASES 6
-  #define MAX_MIXERS 32
-  #define MAX_EXPOS  16
-  #define NUM_CSW    15 // number of custom switches
-  #define NUM_CFN    24 // number of functions assigned to switches
-#else
-  #define MAX_MODELS 16
-  #define NUM_CHNOUT 16 // number of real output channels CH1-CH16
-  #define MAX_PHASES 5
-  #define MAX_MIXERS 32
-  #define MAX_EXPOS  14
-  #define NUM_CSW    12 // number of custom switches
-  #define NUM_CFN    16 // number of functions assigned to switches
-#endif
-
-#define MAX_TIMERS 2
-
-#if defined(CPUARM)
-  #define MAX_CURVES 16
-  #define NUM_POINTS 512
-  #define CURVTYPE   int16_t
-#else
-  #define MAX_CURVES 8
-  #define NUM_POINTS (112-MAX_CURVES)
-  #define CURVTYPE   int8_t
-#endif
-
 enum SwitchSources {
  SWSRC_NONE = 0,

@@ -952,7 +977,7 @@ enum SwitchSources {
  SWSRC_FIRST_MOMENT_SWITCH,
  SWSRC_LAST_MOMENT_SWITCH = SWSRC_FIRST_MOMENT_SWITCH+SWSRC_ON-1,

-#if !defined(CPUM64)
+#if !defined(PCBSTD)
  SWSRC_TRAINER_SHORT,
  SWSRC_TRAINER_LONG,
 #endif
@@ -1125,7 +1150,7 @@ enum Protocols {
  PROTO_NONE
 };

-enum RfProtocols {
+enum RFProtocols {
  RF_PROTO_OFF = -1,
  RF_PROTO_X16,
  RF_PROTO_D8,
@@ -1133,6 +1158,15 @@ enum RfProtocols {
  RF_PROTO_LAST = RF_PROTO_LR12
 };

+enum ModuleTypes {
+  MODULE_TYPE_NONE = 0,
+  MODULE_TYPE_PPM,
+  MODULE_TYPE_XJT,
+  MODULE_TYPE_DJT,
+  MODULE_TYPE_DSM2,
+  MODULE_TYPE_LAST = MODULE_TYPE_DJT
+};
+
 enum FailsafeModes {
  FAILSAFE_HOLD,
  FAILSAFE_CUSTOM,
@@ -1142,7 +1176,7 @@ enum FailsafeModes {

 #if defined(MAVLINK)
 #define TELEMETRY_DATA MavlinkData mavlink;
-#elif defined(FRSKY) || !defined(CPUM64)
+#elif defined(FRSKY)
 #define TELEMETRY_DATA FrSkyData frsky;
 #else
 #define TELEMETRY_DATA
@@ -1166,9 +1200,9 @@ PACK(typedef struct t_ModelData {
  uint8_t   pulsePol:1;
  uint8_t   extendedLimits:1;
  uint8_t   extendedTrims:1;
-  uint8_t   spare1:1;
+  uint8_t   throttleReversed:1;
  int8_t    ppmDelay;
-  BeepANACenter   beepANACenter;        // 1<<0->A1.. 1<<6->A7
+  BeepANACenter beepANACenter;        // 1<<0->A1.. 1<<6->A7
  MixData   mixData[MAX_MIXERS];
  LimitData limitData[NUM_CHNOUT];
  ExpoData  expoData[MAX_EXPOS];
@@ -1177,7 +1211,7 @@ PACK(typedef struct t_ModelData {
  int8_t    points[NUM_POINTS];
  
  CustomSwData customSw[NUM_CSW];
-  CustomFnData  funcSw[NUM_CFN];
+  CustomFnData funcSw[NUM_CFN];
  SwashRingData swashR;
  PhaseData phaseData[MAX_PHASES];

@@ -234,6 +234,7 @@ void per10ms()
 #endif

  if (lightOffCounter) lightOffCounter--;
+  if (flashCounter) flashCounter--;
  if (s_noHi) s_noHi--;
  if (trimsCheckTimer) trimsCheckTimer --;

@@ -670,14 +671,13 @@ void applyExpos(int16_t *anas)
          else
            v = expo(v, GET_GVAR(curveParam, -100, 100, s_perout_flight_phase));
        }
-        int16_t weight=GET_GVAR(ed.weight, 0, 100, s_perout_flight_phase);
-        weight=calc100to256(weight);
+        int16_t weight = GET_GVAR(ed.weight, 0, 100, s_perout_flight_phase);
+        weight = calc100to256(weight);
        v = ((int32_t)v * weight) >> 8;
-        // v = ((int32_t)v * GET_GVAR(ed.weight, 0, 100, s_perout_flight_phase)) / 100;
        anas[cur_chn] = v;
-      } //endif
-    } //endif getSwitch
-  } //endfor
+      }
+    }
+  }
 }

 #if !defined(CPUARM)
@@ -920,7 +920,7 @@ getvalue_t getValue(uint8_t i)
  else if (i<MIXSRC_FIRST_TELEM-1+TELEM_VSPD) return frskyData.hub.varioSpeed;
  else if (i<MIXSRC_FIRST_TELEM-1+TELEM_MIN_A1) return frskyData.analog[0].min;
  else if (i<MIXSRC_FIRST_TELEM-1+TELEM_MIN_A2) return frskyData.analog[1].min;
-  else if (i<MIXSRC_FIRST_TELEM-1+TELEM_MAX_CURRENT) return *(((int16_t*)(&frskyData.hub.minAltitude))+i+1-(MIXSRC_FIRST_TELEM-1+TELEM_MAX_CURRENT));
+  else if (i<MIXSRC_FIRST_TELEM-1+TELEM_MAX_CURRENT) return *(((int16_t*)(&frskyData.hub.minAltitude))+i+1-(MIXSRC_FIRST_TELEM-1+TELEM_MIN_ALT));
 #endif
 #endif
  else return 0;
@@ -1017,7 +1017,7 @@ bool __getSwitch(int8_t swtch)
 #if defined(FRSKY)
          // Telemetry
          if (cs->v1 >= MIXSRC_FIRST_TELEM) {
-            if (frskyStreaming <= 0 && cs->v1 > MIXSRC_FIRST_TELEM-1+MAX_TIMERS)
+            if (frskyStreaming <= 0 && cs->v1 > MIXSRC_FIRST_TELEM-1+TELEM_TM2)
              return swtch > 0 ? false : true;

            y = convertCswTelemValue(cs);
@@ -1039,8 +1039,11 @@ bool __getSwitch(int8_t swtch)
            y = calc100toRESX(cs->v2);
          }
 #else
-          if (cs->v1 >= MIXSRC_GVAR1) {
-            y = cs->v2; // it's a GVAR or a Timer
+          if (cs->v1 >= MIXSRC_FIRST_TELEM) {
+            y = (int16_t)3 * cs->v2; // it's a Timer
+          }
+          else if (cs->v1 >= MIXSRC_GVAR1) {
+            y = cs->v2; // it's a GVAR
          }
          else {
            y = calc100toRESX(cs->v2);
@@ -1212,7 +1215,7 @@ int8_t getMovedSource()
 }
 #endif

-#ifdef FLIGHT_PHASES
+#if defined(FLIGHT_MODES)
 uint8_t getFlightPhase()
 {
  for (uint8_t i=1; i<MAX_PHASES; i++) {
@@ -1228,7 +1231,7 @@ uint8_t getFlightPhase()
 int16_t getRawTrimValue(uint8_t phase, uint8_t idx)
 {
  PhaseData *p = phaseaddress(phase);
-#if defined(CPUM64)
+#if defined(PCBSTD)
  return (((int16_t)p->trim[idx]) << 2) + ((p->trim_ext >> (2*idx)) & 0x03);
 #else
  return p->trim[idx];
@@ -1243,7 +1246,7 @@ int16_t getTrimValue(uint8_t phase, uint8_t idx)
 void setTrimValue(uint8_t phase, uint8_t idx, int16_t trim)
 {
  PhaseData *p = phaseaddress(phase);
-#if defined(CPUM64)
+#if defined(PCBSTD)
  p->trim[idx] = (int8_t)(trim >> 2);
  p->trim_ext = (p->trim_ext & ~(0x03 << (2*idx))) + (((trim & 0x03) << (2*idx)));
 #else
@@ -1318,7 +1321,7 @@ void incRotaryEncoder(uint8_t idx, int8_t inc)
 uint8_t s_gvar_timer = 0;
 uint8_t s_gvar_last = 0;

-#if defined(CPUM64)
+#if defined(PCBSTD)
 int16_t getGVarValue(int16_t x, int16_t min, int16_t max)
 {
  if (GV_IS_GV_VALUE(x,min,max)) {
@@ -1457,7 +1460,9 @@ void checkBacklight()
        backlightOn();
    }

-    if (g_eeGeneral.backlightMode == e_backlight_mode_on || lightOffCounter || isFunctionActive(FUNC_BACKLIGHT))
+    bool backlightOn = (g_eeGeneral.backlightMode == e_backlight_mode_on || lightOffCounter || isFunctionActive(FUNC_BACKLIGHT));
+    if (flashCounter) backlightOn = !backlightOn;
+    if (backlightOn)
      BACKLIGHT_ON();
    else
      BACKLIGHT_OFF();
@@ -1579,7 +1584,7 @@ void checkTHR()
 #else
  getADC();   // if thr is down - do not display warning at all
  int16_t lowLim = g_eeGeneral.calibMid[thrchn];
-  lowLim = (g_eeGeneral.throttleReversed ? - lowLim - g_eeGeneral.calibSpanPos[thrchn] : lowLim - g_eeGeneral.calibSpanNeg[thrchn]);
+  lowLim = (g_model.throttleReversed ? - lowLim - g_eeGeneral.calibSpanPos[thrchn] : lowLim - g_eeGeneral.calibSpanNeg[thrchn]);
  lowLim += THRCHK_DEADBAND;
 #endif
  int16_t v = thrAnaIn(thrchn);
@@ -1736,7 +1741,7 @@ uint8_t checkTrim(uint8_t event)
 #if defined(GVARS)
 #define TRIM_REUSED() trimGvar[idx] >= 0
    if (TRIM_REUSED()) {
-#if defined(CPUM64)
+#if defined(PCBSTD)
      phase = 0;
 #else
      phase = getGVarFlightPhase(s_perout_flight_phase, trimGvar[idx]);
@@ -1863,7 +1868,7 @@ uint16_t BandGap ;
 int16_t thrAnaIn(uint8_t chan)
 {
  int16_t v = anaIn(chan);
-  return (g_eeGeneral.throttleReversed) ? -v : v;
+  return (g_model.throttleReversed) ? -v : v;
 }

 #if !defined(SIMU)
@@ -1975,6 +1980,7 @@ void getADC_bandgap()

 uint8_t g_vbat100mV = 0;
 uint16_t lightOffCounter;
+uint8_t flashCounter = 0;

 uint16_t s_timeCumTot;
 uint16_t s_timeCumThr;    // THR in 1/16 sec
@@ -2066,7 +2072,7 @@ FORCEINLINE void evalTrims()
    // do trim -> throttle trim if applicable
    int16_t trim = getTrimValue(phase, i);
    if (i==THR_STICK && g_model.thrTrim) {
-      if (g_eeGeneral.throttleReversed)
+      if (g_model.throttleReversed)
        trim = -trim;
      int16_t v = anas[i];
      int32_t vv = ((int32_t)trim-TRIM_MIN)*(RESX-v)>>(RESX_SHIFT+1);
@@ -2124,7 +2130,7 @@ BeepANACenter evalSticks(uint8_t mode)
      v = -v;
 #endif

-    if (g_eeGeneral.throttleReversed && ch==THR_STICK)
+    if (g_model.throttleReversed && ch==THR_STICK)
      v = -v;

 #if defined(EXTRA_3POS)
@@ -2321,7 +2327,7 @@ PLAY_FUNCTION(playValue, uint8_t idx)
 }
 #endif

-#if !defined(CPUM64)
+#if !defined(PCBSTD)
 uint8_t mSwitchDuration[1+NUM_ROTARY_ENCODERS] = { 0 };
 #define CFN_PRESSLONG_DURATION   100
 #endif
@@ -2367,7 +2373,7 @@ void evalFunctions()
      MASK_CFN_TYPE  switch_mask   = ((MASK_CFN_TYPE)1 << i);
      uint8_t momentary = 0;

-#if !defined(CPUM64)
+#if !defined(PCBSTD)

  #define MOMENTARY_START_TEST() ( (momentary && !(activeSwitches & switch_mask) && active) || \
                                   (short_long==1 && !active && mSwitchDuration[mswitch]>0 && mSwitchDuration[mswitch]<CFN_PRESSLONG_DURATION) || \
@@ -2408,7 +2414,7 @@ void evalFunctions()
      if (active) newActiveSwitches |= switch_mask;
      if (momentary || short_long) {

-#if !defined(CPUM64)
+#if !defined(PCBSTD)
        bool swState = active;
 #endif

@@ -2439,7 +2445,7 @@ void evalFunctions()
          active = (activeFnSwitches & switch_mask);
          momentary = false;
        }
-#if !defined(CPUM64)
+#if !defined(PCBSTD)
        if (short_long) {
          if (swState) {
            if (mSwitchDuration[mswitch] < 255)
@@ -2459,13 +2465,6 @@ void evalFunctions()

      if (active || momentary) {

-        if (active)
-          TRACE_DEBUG("ACTIVE ");
-        if (momentary)
-          TRACE_DEBUG("MOMENTARY ");
-
-        TRACE_DEBUG("\n");
-
        if (CFN_ACTIVE(sd)) {
          if (CFN_FUNC(sd) < FUNC_TRAINER) {
            safetyCh[CFN_CH_NUMBER(sd)] = CFN_PARAM(sd);
@@ -2989,7 +2988,8 @@ void perOut(uint8_t mode, uint8_t tick10ms)
      
      if (tmp.dword<0) {
        if ((tmp.words_t.hi&0xFF80)!=0xFF80) tmp.words_t.hi=0xFF86; // set to min nearly
-      } else {
+      }
+      else {
        if ((tmp.words_t.hi|0x007F)!=0x007F) tmp.words_t.hi=0x0079; // set to max nearly
      }
      *ptr=tmp.dword;
@@ -3320,9 +3320,9 @@ void doMixerCalculations()
      AUDIO_INACTIVITY();

 #if defined(AUDIO)
-    if (mixWarning & 1) if ((s_timeCumTot&0x03)== 0) AUDIO_MIX_WARNING(1);
-    if (mixWarning & 2) if ((s_timeCumTot&0x03)== 1) AUDIO_MIX_WARNING(2);
-    if (mixWarning & 4) if ((s_timeCumTot&0x03)== 2) AUDIO_MIX_WARNING(3);
+    if (mixWarning & 1) if ((s_timeCumTot&0x03)==0) AUDIO_MIX_WARNING(1);
+    if (mixWarning & 2) if ((s_timeCumTot&0x03)==1) AUDIO_MIX_WARNING(2);
+    if (mixWarning & 4) if ((s_timeCumTot&0x03)==2) AUDIO_MIX_WARNING(3);
 #endif

 #if defined(ACCURAT_THROTTLE_TIMER)
@@ -3640,7 +3640,7 @@ uint16_t getTmr16KHz()
 ISR(TIMER2_OVF_vect, ISR_NOBLOCK)
 {
  cli();
-  TIMSK &= ~ (1<<TOIE2) ; // stop reentrance
+  TIMSK &= ~(1<<TOIE2) ; // stop reentrance
  sei();

 #if defined(AUDIO)
@@ -3796,7 +3796,7 @@ ISR(USART0_UDRE_vect)
  else {
    FRSKY_USART0_vect();
  }
-#elif defined (FRSKY)
+#elif defined(FRSKY)
  FRSKY_USART0_vect();
 #else
  DSM2_USART0_vect();
@@ -86,10 +86,10 @@
 #define IF_RTCLOCK(x)
 #endif

-#if defined(BEEPER)
-#define IF_BEEPER(x) x,
+#if defined(BUZZER)
+#define IF_BUZZER(x) x,
 #else
-#define IF_BEEPER(x)
+#define IF_BUZZER(x)
 #endif

 #if defined(AUDIO)
@@ -164,10 +164,10 @@
 #define IF_TEMPLATES(x)
 #endif

-#if defined(FLIGHT_PHASES)
-#define IF_FLIGHT_PHASES(x) x,
+#if defined(FLIGHT_MODES)
+#define IF_FLIGHT_MODES(x) x,
 #else
-#define IF_FLIGHT_PHASES(x)
+#define IF_FLIGHT_MODES(x)
 #endif

 #if defined(CURVES)
@@ -457,13 +457,17 @@ enum EnumKeys {
 #endif

 #if defined(PCBTARANIS)
-  #define NUM_PORT1_CHANNELS(model) ((8+(model.ppmNCH*2)))
+  static const int8_t maxChannelsModules[] = { 0, 8, 8, 0, 0 };
+  static const int8_t maxChannelsXJT[] = { 0, 8, 0, 4 };
+  #define IS_MODULE_XJT(idx)        ((idx==0 || g_model.externalModule == MODULE_TYPE_XJT) && (g_model.moduleData[idx].rfProtocol != RF_PROTO_OFF))
+  #define IS_MODULE_PPM(idx)        (idx==1 && g_model.externalModule == MODULE_TYPE_PPM)
+  #define NUM_CHANNELS(idx)         (8+g_model.moduleData[idx].channelsCount)
+  #define MAX_PORT1_CHANNELS()      (maxChannelsXJT[1+g_model.moduleData[0].rfProtocol])
+  #define MAX_PORT2_CHANNELS()      ((g_model.externalModule == MODULE_TYPE_XJT) ? maxChannelsXJT[1+g_model.moduleData[1].rfProtocol] : maxChannelsModules[g_model.externalModule])
+  #define MAX_CHANNELS(idx)         (idx==0 ? MAX_PORT1_CHANNELS() : MAX_PORT2_CHANNELS())
 #else
-  #define NUM_PORT1_CHANNELS(model) (IS_PXX_PROTOCOL(model.protocol) ? 8 : (IS_DSM2_PROTOCOL(model.protocol) ? 6 : (8+(model.ppmNCH*2))))
-#endif
-
-#if defined(PCBSKY9X)
-  #define NUM_PORT2_CHANNELS(model) (8+(model.ppm2NCH*2))
+  #define NUM_PORT1_CHANNELS()      (IS_PXX_PROTOCOL(g_model.protocol) ? 8 : (IS_DSM2_PROTOCOL(g_model.protocol) ? 6 : (8+(g_model.ppmNCH*2))))
+  #define NUM_PORT2_CHANNELS()      (8+(g_model.ppm2NCH*2))
 #endif

 #include "lcd.h"
@@ -666,7 +670,7 @@ extern uint16_t inacCounter;
 extern uint16_t inacSum;

 #if defined(PXX)
-extern uint8_t pxxFlag;
+extern uint8_t pxxFlag[NUM_MODULES];
 #endif

 #define PXX_SEND_RXNUM       0x01
@@ -747,7 +751,7 @@ int8_t  getMovedSwitch();
 int8_t getMovedSource();
 #endif

-#ifdef FLIGHT_PHASES
+#if defined(FLIGHT_MODES)
  extern uint8_t getFlightPhase();
 #else
  #define getFlightPhase() 0
@@ -772,7 +776,7 @@ extern void setTrimValue(uint8_t phase, uint8_t idx, int16_t trim);
 #endif

 #if defined(GVARS)
-  #if defined(CPUM64)
+  #if defined(PCBSTD)
    int16_t getGVarValue(int16_t x, int16_t min, int16_t max);
    void setGVarValue(uint8_t x, int8_t value);
    #define GET_GVAR(x, min, max, p) getGVarValue(x, min, max)
@@ -1062,10 +1066,11 @@ extern uint16_t anaIn(uint8_t chan);
 extern int16_t thrAnaIn(uint8_t chan);
 extern int16_t calibratedStick[NUM_STICKS+NUM_POTS];

-#define FLASH_DURATION 50 /*500ms*/
+#define FLASH_DURATION 20 /*200ms*/

 extern uint8_t beepAgain;
 extern uint16_t lightOffCounter;
+extern uint8_t flashCounter;
 extern uint8_t mixWarning;

 extern PhaseData *phaseaddress(uint8_t idx);
@@ -1234,8 +1239,8 @@ enum AUDIO_SOUNDS {
 #endif
 #endif

-#if defined(BEEPER)
-#include "beeper.h"
+#if defined(BUZZER)
+#include "buzzer.h"
 #endif

 #if defined(PCBSTD) && defined(VOICE)
@@ -1376,10 +1381,10 @@ void getGpsPilotPosition();
 void getGpsDistance();
 void varioWakeup();

-#if defined(AUDIO) && defined(BEEPER)
-  #define IS_SOUND_OFF() (!g_eeGeneral.alarmsBeep && g_eeGeneral.beeperMode == e_mode_quiet)
+#if defined(AUDIO) && defined(BUZZER)
+  #define IS_SOUND_OFF() (g_eeGeneral.buzzerMode==e_mode_quiet && g_eeGeneral.beepMode==e_mode_quiet)
 #else
-  #define IS_SOUND_OFF() (g_eeGeneral.beeperMode == e_mode_quiet)
+  #define IS_SOUND_OFF() (g_eeGeneral.beepMode == e_mode_quiet)
 #endif

 #if defined(CPUARM)
@@ -39,7 +39,7 @@
 uint8_t s_pulses_paused = 0;
 uint8_t s_current_protocol = 255;
 uint32_t failsafeCounter = 100;
-uint8_t pxxFlag = 0;
+uint8_t pxxFlag[NUM_MODULES] = { 0 };

 uint16_t ppmStream[20]  = { 2000, 2200, 2400, 2600, 2800, 3000, 3200, 3400, 9000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } ;
 uint16_t ppm2Stream[20] = { 2000, 2200, 2400, 2600, 2800, 3000, 3200, 3400, 9000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } ;
@@ -51,8 +51,14 @@ uint8_t Bit_pulses[64] ;                          // Likely more than we need
 uint8_t *Pulses2MHzptr ;
 #else
 uint16_t pxxStream[400] ;               // Transisitions
+ #if defined(PCBTARANIS)
+uint16_t pxx2Stream[400] ;               // Transisitions
+uint16_t *pxxStreamPtr[NUM_MODULES] ;
+uint16_t PxxValue[NUM_MODULES] ;
+ #else
 uint16_t *pxxStreamPtr ;
 uint16_t PxxValue ;
+ #endif
 #endif

 // DSM2 control bits
@@ -67,7 +73,14 @@ uint8_t Serial_byte ;
 uint8_t Serial_bit_count;
 uint8_t Serial_byte_count ;

-void setupPulses();
+#if defined(PCBTARANIS)
+#define MODULE_INDEX_PARAM uint32_t module_index
+#else
+#define MODULE_INDEX_PARAM
+#endif
+
+void setupPulses( MODULE_INDEX_PARAM ) ;
+
 void setupPulsesDsm2(uint8_t chns);
 void setupPulsesPXX();

@@ -77,7 +90,11 @@ void startPulses()
 #if defined(PCBSKY9X)
  init_main_ppm(3000, 1) ;            // Default for now, initial period 1.5 mS, output on
 #else
+ #if defined(PCBTARANIS)
+  init_ppm( 0 ) ;
+ #else
  init_main_ppm();
+ #endif
 #endif
 }

@@ -113,11 +130,11 @@ void setupPulsesPPM(PPM_PORT_PARAM)                   // Don't enable interrupts
    pwmCh = 1;
    ptr = ppm2Stream;
    firstCh = g_model.ppm2SCH;
-    lastCh = min<uint32_t>(NUM_CHNOUT, firstCh + 8 + (g_model.ppm2NCH * 2));
+    lastCh = min<uint32_t>(NUM_CHNOUT, firstCh + NUM_PORT2_CHANNELS());
  }
 #else
  #define firstCh 0
-  uint32_t lastCh = 8 + g_model.ppmNCH * 2; //Channels *2
+  uint32_t lastCh = NUM_CHANNELS(0);
  uint16_t * ptr = ppmStream;
 #endif

@@ -141,8 +158,13 @@ void setupPulsesPPM(PPM_PORT_PARAM)                   // Don't enable interrupts
  *(ptr + 1) = 0;

 #if defined(PCBTARANIS)
-  TIM1->CCR2 = rest - 1000 ;             // Update time
-  TIM1->CCR1 = (g_model.ppmDelay*50+300)*2 ;
+// THIS IS SPECIFIC TO EITHER THE INTERNAL OR EXTERNAL MODULE
+// OTHER IS COMMENTED OUT. IF PPM IS NEEDED ON INTERNAL AS WELL AS EXTARNAL
+// setupPulsesPPM() WILL NEED A "MODULE" PARAMETER
+  TIM8->CCR2 = rest - 1000 ;             // Update time
+  TIM8->CCR1 = (g_model.ppmDelay*50+300)*2 ;
+//  TIM1->CCR2 = rest - 1000 ;             // Update time
+//  TIM1->CCR3 = (g_model.ppmDelay*50+300)*2 ;
 #endif
 }

@@ -182,9 +204,80 @@ const uint16_t CRCTable[]=
  0x7bc7,0x6a4e,0x58d5,0x495c,0x3de3,0x2c6a,0x1ef1,0x0f78
 };

+#if defined(PCBTARANIS)
+uint16_t PcmCrc[2] ;
+uint8_t PcmOnesCount[2] ;
+
+void crc( uint8_t data, uint32_t module_index )
+{
+  //  uint8_t i ;
+
+  PcmCrc[module_index]=(PcmCrc[module_index]<<8)^(CRCTable[((PcmCrc[module_index]>>8)^data) & 0xFF]);
+}
+
+void putPcmPart( uint8_t value, uint32_t module_index )
+{
+  PxxValue[module_index] += 18 ;                                        // Output 1 for this time
+  *pxxStreamPtr[module_index]++ = PxxValue[module_index] ;
+  PxxValue[module_index] += 14 ;
+  if ( value ) {
+    PxxValue[module_index] += 16 ;
+  }
+  *pxxStreamPtr[module_index]++ = PxxValue[module_index] ;  // Output 0 for this time
+}
+
+void putPcmFlush( uint32_t module_index )
+{
+  *pxxStreamPtr[module_index]++ = 18010 ;             // Past the 18000 of the ARR
+}
+
+void putPcmBit( uint8_t bit, uint32_t module_index )
+{
+  if ( bit )
+  {
+    PcmOnesCount[module_index] += 1 ;
+    putPcmPart( 1, module_index ) ;
+  }
+  else
+  {
+    PcmOnesCount[module_index] = 0 ;
+    putPcmPart( 0, module_index ) ;
+  }
+  if ( PcmOnesCount[module_index] >= 5 )
+  {
+    putPcmBit( 0, module_index ) ;                                // Stuff a 0 bit in
+  }
+}
+
+void putPcmByte( uint8_t byte, uint32_t module_index )
+{
+  crc(byte, module_index);
+
+  for (uint8_t i=0; i<8; i++) {
+    putPcmBit(byte & 0x80, module_index);
+    byte <<= 1;
+  }
+}
+
+void putPcmHead( uint32_t module_index )
+{
+  // send 7E, do not CRC
+  // 01111110
+  putPcmPart( 0, module_index ) ;
+  putPcmPart( 1, module_index ) ;
+  putPcmPart( 1, module_index ) ;
+  putPcmPart( 1, module_index ) ;
+  putPcmPart( 1, module_index ) ;
+  putPcmPart( 1, module_index ) ;
+  putPcmPart( 1, module_index ) ;
+  putPcmPart( 0, module_index ) ;
+}
+
+#else // Not Taranis
 uint16_t PcmCrc ;
 uint8_t PcmOnesCount ;

+
 void crc( uint8_t data )
 {
  //  uint8_t i ;
@@ -285,11 +378,11 @@ void putPcmHead()
  putPcmPart( 1 ) ;
  putPcmPart( 0 ) ;
 }
+#endif // Taranis

-void setupPulsesPXX()
+void setupPulsesPXX(MODULE_INDEX_PARAM)
 {
-  uint16_t chan ;
-  uint16_t chan_1 ;
+  uint16_t chan=0, chan_low=0;

 #if defined(PCBSKY9X)
  Serial_byte = 0 ;
@@ -297,10 +390,25 @@ void setupPulsesPXX()
  Serial_byte_count = 0 ;
  Pulses2MHzptr = Bit_pulses ;
 #else
+ #if defined(PCBTARANIS)
+  pxxStreamPtr[module_index] = module_index ? pxx2Stream : pxxStream ;
+  PxxValue[module_index] = 0 ;
+ #else
  pxxStreamPtr = pxxStream ;
  PxxValue = 0 ;
+ #endif
 #endif

+#if defined(PCBTARANIS)
+  PcmCrc[module_index] = 0;
+  PcmOnesCount[module_index] = 0;
+
+  /* Sync */
+  putPcmHead(module_index);
+
+  /* Rx Number */
+  putPcmByte(g_model.modelId, module_index);
+#else
  PcmCrc = 0;
  PcmOnesCount = 0;

@@ -309,83 +417,116 @@ void setupPulsesPXX()

  /* Rx Number */
  putPcmByte(g_model.modelId);
+#endif

  /* FLAG1 */
  uint8_t flag1;
-  if (pxxFlag & PXX_SEND_RXNUM) {
-    flag1 = (g_model.rfProtocol << 6) | (g_eeGeneral.countryCode << 1) | pxxFlag;
+  if (pxxFlag[0] & PXX_SEND_RXNUM) {
+    
+		
+#if defined(PCBTARANIS)
+    flag1 = (g_model.moduleData[module_index].rfProtocol << 6) | (g_eeGeneral.countryCode << 1) | pxxFlag[module_index];
  }
  else {
-    flag1 = (g_model.rfProtocol << 6) | pxxFlag;
+    flag1 = (g_model.moduleData[module_index].rfProtocol << 6) | pxxFlag[0];
+#else
+    flag1 = (g_model.moduleData[0].rfProtocol << 6) | (g_eeGeneral.countryCode << 1) | pxxFlag[0];
+  }
+  else {
+    flag1 = (g_model.moduleData[0].rfProtocol << 6) | pxxFlag[0];
+#endif
+
 #if defined(PCBTARANIS)
-    if (g_model.failsafeMode != FAILSAFE_HOLD) {
+    if (g_model.moduleData[module_index].failsafeMode != FAILSAFE_HOLD) {
      if (failsafeCounter-- == 0) {
        failsafeCounter = 1000;
        flag1 |= PXX_SEND_FAILSAFE;
      }
-      if (failsafeCounter == 0 && g_model.ppmNCH > 0) {
+      if (failsafeCounter == 0 && g_model.moduleData[module_index].channelsCount > 0) {
        flag1 |= PXX_SEND_FAILSAFE;
      }
    }
 #endif
  }
+#if defined(PCBTARANIS)
+  putPcmByte(flag1, module_index);
+
+  /* FLAG2 */
+  putPcmByte(0, module_index);
+#else
  putPcmByte(flag1);

  /* FLAG2 */
  putPcmByte(0);
+#endif

  /* PPM */
  static uint32_t pass = 0;
  uint32_t sendUpperChannels = 0;
  if (pass++ & 0x01) {
-    sendUpperChannels = g_model.ppmNCH*2;
+#if defined(PCBTARANIS)
+    sendUpperChannels = g_model.moduleData[module_index].channelsCount;
+#else
+    sendUpperChannels = g_model.moduleData[0].channelsCount;
+#endif
  }
-  for (uint32_t i=0; i<8; i+=2) {
+  for (uint32_t i=0; i<8; i++) {
 #if defined(PCBTARANIS)
    if (flag1 & PXX_SEND_FAILSAFE) {
-      if (g_model.failsafeMode == FAILSAFE_NOPULSES) {
-        if (i < sendUpperChannels) {
-          chan   = 3072;
-          chan_1 = 3072;
-        }
-        else {
-          chan   = 1024;
-          chan_1 = 1024;
-        }
+      if (g_model.moduleData[module_index].failsafeMode == FAILSAFE_NOPULSES) {
+        if (i < sendUpperChannels)
+          chan = 3072;
+        else
+          chan = 1024;
      }
      else {
        if (i < sendUpperChannels) {
-          chan =  limit(2048, (g_model.failsafeChannels[8+g_model.ppmSCH+i] * 512 / 682) + 3072, 4095);
-          chan_1 = limit(2048, (g_model.failsafeChannels[8+g_model.ppmSCH+i+1] * 512 / 682) + 3072, 4095);
+          chan =  limit(2048, PPM_CH_CENTER(8+g_model.moduleData[module_index].channelsStart+i) - PPM_CENTER + (g_model.moduleData[module_index].failsafeChannels[8+g_model.moduleData[0].channelsStart+i] * 512 / 682) + 3072, 4095);
          if (chan == 3072) chan = 3073;
-          if (chan_1 == 3072) chan_1 = 3073;
        }
        else {
-          chan = limit(0, (g_model.failsafeChannels[g_model.ppmSCH+i] * 512 / 682) + 1024, 2047);
-          chan_1 = limit(0, (g_model.failsafeChannels[g_model.ppmSCH+i+1] * 512 / 682) + 1024, 2047);
+          chan = limit(0, PPM_CH_CENTER(g_model.moduleData[module_index].channelsStart+i) - PPM_CENTER + (g_model.moduleData[module_index].failsafeChannels[g_model.moduleData[0].channelsStart+i] * 512 / 682) + 1024, 2047);
          if (chan == 1024) chan = 1025;
-          if (chan_1 == 1024) chan_1 = 1025;
        }
      }
    }
    else
 #endif
    {
-      if (i < sendUpperChannels) {
-        chan =  limit(2048, (channelOutputs[8+g_model.ppmSCH+i] * 512 / 682) + 3072, 4095);
-        chan_1 = limit(2048, (channelOutputs[8+g_model.ppmSCH+i+1] * 512 / 682) + 3072, 4095);
-      }
-      else {
-        chan = limit(0, (channelOutputs[g_model.ppmSCH+i] * 512 / 682) + 1024, 2047);
-        chan_1 = limit(0, (channelOutputs[g_model.ppmSCH+i+1] * 512 / 682) + 1024, 2047);
-      }
+      if (i < sendUpperChannels)
+        chan =  limit(2048, PPM_CH_CENTER(8+g_model.moduleData[0].channelsStart+i) - PPM_CENTER + (channelOutputs[8+g_model.moduleData[0].channelsStart+i] * 512 / 682) + 3072, 4095);
+      else
+        chan = limit(0, PPM_CH_CENTER(g_model.moduleData[0].channelsStart+i) - PPM_CENTER + (channelOutputs[g_model.moduleData[0].channelsStart+i] * 512 / 682) + 1024, 2047);
+    }
+
+    if (i & 1) {
+#if defined(PCBTARANIS)
+      putPcmByte(chan_low, module_index); // Low byte of channel
+      putPcmByte( ( ( chan_low >> 8 ) & 0x0F ) | ( chan << 4), module_index ) ;  // 4 bits each from 2 channels
+      putPcmByte(chan >> 4, module_index);  // High byte of channel
+#else
+      putPcmByte(chan_low); // Low byte of channel
+      putPcmByte( ( ( chan_low >> 8 ) & 0x0F ) | ( chan << 4) ) ;  // 4 bits each from 2 channels
+      putPcmByte(chan >> 4);  // High byte of channel
+#endif
+    }
+    else {
+      chan_low = chan;
    }
-    putPcmByte(chan); // Low byte of channel
-    putPcmByte( ( ( chan >> 8 ) & 0x0F ) | ( chan_1 << 4) ) ;  // 4 bits each from 2 channels
-    putPcmByte(chan_1 >> 4);  // High byte of channel
  }

  /* CRC16 */
+#if defined(PCBTARANIS)
+  putPcmByte(0, module_index);
+  chan = PcmCrc[module_index];
+  putPcmByte(chan>>8, module_index);
+  putPcmByte(chan, module_index);
+
+  /* Sync */
+  putPcmHead(module_index);
+
+  putPcmFlush(module_index);
+#else
  putPcmByte(0);
  chan = PcmCrc;
  putPcmByte(chan>>8);
@@ -395,6 +536,7 @@ void setupPulsesPXX()
  putPcmHead();

  putPcmFlush();
+#endif
 }

 #if defined(DSM2)
@@ -549,12 +691,16 @@ extern "C" void PWM_IRQHandler(void)
 }
 #endif

-void setupPulses()
+void setupPulses(MODULE_INDEX_PARAM)
 {
  heartbeat |= HEART_TIMER_PULSES;

 #if defined(PCBTARANIS)
-  uint8_t required_protocol = (g_model.rfProtocol == RF_PROTO_OFF ? PROTO_NONE : PROTO_PXX);
+	if ( module_index )
+	{
+		module_index = 1 ;			// Ensure is 0 or 1 only
+	}
+  uint8_t required_protocol = (g_model.moduleData[module_index].rfProtocol == RF_PROTO_OFF ? PROTO_NONE : PROTO_PXX);
 #else
  uint8_t required_protocol = g_model.protocol;
 #endif
@@ -566,7 +712,11 @@ void setupPulses()

    switch (s_current_protocol) { // stop existing protocol hardware
      case PROTO_PXX:
+#if defined(PCBTARANIS)
+        disable_pxx(module_index);
+#else
        disable_pxx();
+#endif
        break;
 #if defined(DSM2)
      case PROTO_DSM2_LP45:
@@ -576,7 +726,11 @@ void setupPulses()
        break;
 #endif
      default:
+#if defined(PCBTARANIS)
+        disable_ppm(module_index);
+#else
        disable_main_ppm();
+#endif
        break;
    }

@@ -585,10 +739,12 @@ void setupPulses()
 #if defined(PCBTARANIS)
    switch (required_protocol) {
      case PROTO_PXX:
-        init_pxx();
+        init_pxx(0);
+//        init_pxx(module_index);
        break;
      default:
-        init_main_ppm();
+        init_ppm(0);
+//        init_ppm(module_index);
        break;
    }
 #elif defined(PCBSKY9X)
@@ -616,7 +772,11 @@ void setupPulses()
  // Set up output data here
  switch (required_protocol) {
    case PROTO_PXX:
+#if defined(PCBTARANIS)
+      setupPulsesPXX(module_index);
+#else
      setupPulsesPXX();
+#endif
      break;
 #if defined(DSM2)
    case PROTO_DSM2_LP45:
@@ -98,7 +98,7 @@ typedef const uint8_t pm_uint8_t;
 typedef const int16_t pm_int16_t;
 typedef const int8_t pm_int8_t;

-#if defined(PCBTARANIS) || defined(PCBACT)
+#if defined(PCBTARANIS)
 extern GPIO_TypeDef gpioa;
 #undef GPIOA
 #define GPIOA (&gpioa)
@@ -56,7 +56,6 @@ public:
  Open9xSim(){};
  Open9xSim(FXApp* a);
  long onKeypress(FXObject*,FXSelector,void*);
-  long onArrowPress(FXObject*,FXSelector,void*);
  long onTimeout(FXObject*,FXSelector,void*);
  void makeSnapshot(const FXDrawable* drawable);
  void doEvents();
@@ -69,18 +68,13 @@ private:

 public:
  FXSlider      *sliders[8];
-  FXKnob        *knobs[8];
-  FXKnob        *knobsppm[8];
-  FXArrowButton *arrow[3];
-  FXArrowButton *arrow2[3];
-  FXToggleButton *togButPpm;
+  FXKnob        *knobs[NUM_POTS];
 };
 // Message Map
 FXDEFMAP(Open9xSim) Open9xSimMap[]={

  //________Message_Type_________ID_____________________Message_Handler_______
  FXMAPFUNC(SEL_TIMEOUT,   2,    Open9xSim::onTimeout),
-  FXMAPFUNC(SEL_COMMAND,   1000,    Open9xSim::onArrowPress),
  FXMAPFUNC(SEL_KEYPRESS,  0,    Open9xSim::onKeypress),
  };

@@ -89,16 +83,10 @@ FXIMPLEMENT(Open9xSim,FXMainWindow,Open9xSimMap,ARRAYNUMBER(Open9xSimMap))
 Open9xSim::Open9xSim(FXApp* a)
 :FXMainWindow(a,"Open9xSim",NULL,NULL,DECOR_ALL,20,90,0,0)
 {
-
  firstTime=true;
  for(int i=0; i<(LCD_W*LCD_H/8); i++) displayBuf[i]=0;//rand();
  bmp = new FXPPMImage(getApp(),NULL,IMAGE_OWNED|IMAGE_KEEP|IMAGE_SHMI|IMAGE_SHMP, W2, H2);

-  FXHorizontalFrame *hf00=new FXHorizontalFrame(this,LAYOUT_CENTER_X);
-  FXHorizontalFrame *hf01=new FXHorizontalFrame(this,LAYOUT_CENTER_X);
-  FXHorizontalFrame *hf02=new FXHorizontalFrame(this,LAYOUT_CENTER_X);
-  //FXHorizontalFrame *hf2=new FXHorizontalFrame(this,LAYOUT_FILL_X);
-  FXHorizontalFrame *hf10=new FXHorizontalFrame(this,LAYOUT_CENTER_X);
  FXHorizontalFrame *hf11=new FXHorizontalFrame(this,LAYOUT_CENTER_X);
  FXHorizontalFrame *hf1=new FXHorizontalFrame(this,LAYOUT_FILL_X);

@@ -109,18 +97,18 @@ Open9xSim::Open9xSim(FXApp* a)
 #define L LAYOUT_FIX_WIDTH|LAYOUT_FIX_HEIGHT|LAYOUT_FIX_X|LAYOUT_FIX_Y
 #undef X0
 #define X0 10
-#define Y0 20
+#define Y0 10
      case 0:
-        sliders[i]=new FXSlider(hf1,NULL,0,L|SLIDER_HORIZONTAL,X0+0,Y0+120,100,20);
+        sliders[i]=new FXSlider(hf1,NULL,0,L|SLIDER_HORIZONTAL,X0+0,Y0+100,100,20);
        break;
      case 1:
-        sliders[i]=new FXSlider(hf1,NULL,0,L|SLIDER_VERTICAL,X0+100,Y0+20,20,100);
+        sliders[i]=new FXSlider(hf1,NULL,0,L|SLIDER_VERTICAL,X0+100,Y0+0,20,100);
        break;
      case 2:
-        sliders[i]=new FXSlider(hf1,NULL,0,L|SLIDER_VERTICAL,X0+120,Y0+20,20,100);
+        sliders[i]=new FXSlider(hf1,NULL,0,L|SLIDER_VERTICAL,X0+120,Y0+0,20,100);
        break;
      case 3:
-        sliders[i]=new FXSlider(hf1,NULL,0,L|SLIDER_HORIZONTAL,X0+140,Y0+120,100,20);
+        sliders[i]=new FXSlider(hf1,NULL,0,L|SLIDER_HORIZONTAL,X0+140,Y0+100,100,20);
        break;
      default:;
    }
@@ -128,26 +116,13 @@ Open9xSim::Open9xSim(FXApp* a)
    sliders[i]->setTickDelta(7);
    sliders[i]->setValue(0);
  }
-  arrow[0]= new FXArrowButton(hf10,this,1000,ARROW_LEFT);
-  arrow[1]= new FXArrowButton(hf10,this,1000,ARROW_UP);
-  arrow[2]= new FXArrowButton(hf10,this,1000,ARROW_RIGHT);
-  for(int i=4; i<8; i++){
+
+  for(int i=0; i<NUM_POTS; i++){
    knobs[i]= new FXKnob(hf11,NULL,0,KNOB_TICKS|LAYOUT_LEFT);
    knobs[i]->setRange(-1024, 1024);
    knobs[i]->setValue(0);
  }
  
-  arrow2[0]= new FXArrowButton(hf00,this,1000,ARROW_LEFT);
-  arrow2[1]= new FXArrowButton(hf00,this,1000,ARROW_UP);
-  arrow2[2]= new FXArrowButton(hf00,this,1000,ARROW_RIGHT);
-  togButPpm = new FXToggleButton(hf00,"on", "off", NULL, NULL, NULL, 0, TOGGLEBUTTON_NORMAL);
-  for(int i=0; i<8; i++){
-    knobsppm[i]= new FXKnob(i<4?hf01:hf02,NULL,0,KNOB_TICKS|LAYOUT_LEFT);
-    knobsppm[i]->setRange(1000,2000);
-    knobsppm[i]->setValue(1500+i*20);
-  }
-
-
  bmf = new FXImageFrame(this,bmp);

  getApp()->addTimeout(this,2,100);
@@ -194,25 +169,6 @@ void Open9xSim::doEvents()
  getApp()->runOneEvent(false);
 }

-long Open9xSim::onArrowPress(FXObject*sender,FXSelector sel,void*v)
-{
-  int which,val;
-  if(sender==arrow[0]) { which=1; val=0;}
-  if(sender==arrow[1]) { which=1; val=512;}
-  if(sender==arrow[2]) { which=1; val=1023;}
-  if(sender==arrow2[0]){ which=2; val=1000;}
-  if(sender==arrow2[1]){ which=2; val=1500;}
-  if(sender==arrow2[2]){ which=2; val=2000;}
-  if(which == 1){
-    for(int i=0; i<4; i++) sliders[i]->setValue(val);
-    for(int i=4; i<7; i++) knobs[i]->setValue(val);
-  }
-  if(which == 2){
-    for(int i=0; i<8; i++) knobsppm[i]->setValue(val);
-  }
-  return 0;
-}
-
 long Open9xSim::onKeypress(FXObject*,FXSelector,void*v)
 {
  FXEvent *evt=(FXEvent*)v;
@@ -225,15 +181,6 @@ long Open9xSim::onKeypress(FXObject*,FXSelector,void*v)

 long Open9xSim::onTimeout(FXObject*,FXSelector,void*)
 {
-  if(togButPpm->getState()){
-    for(int i=0; i<8; i++){
-      g_ppmIns[i]=knobsppm[i]->getValue()-1500;
-      if(g_ppmIns[i]<-400){
-	break;
-      }
-    }
-  }
-
  if(hasFocus()) {
    static int keys1[]={
 #if defined(PCBTARANIS)
@@ -241,8 +188,8 @@ long Open9xSim::onTimeout(FXObject*,FXSelector,void*)
      KEY_Page_Down, KEY_PAGE,
      KEY_Return,    KEY_ENTER,
      KEY_BackSpace, KEY_EXIT,
-      KEY_Right,     KEY_PLUS,
-      KEY_Left,      KEY_MINUS,
+      KEY_Up,     KEY_PLUS,
+      KEY_Down,      KEY_MINUS,
 #else
      KEY_Return,    KEY_MENU,
      KEY_BackSpace, KEY_EXIT,
@@ -464,5 +411,5 @@ uint16_t anaIn(uint8_t chan)
  else if (chan<NUM_STICKS)
    return th9xSim->sliders[chan]->getValue();
  else
-    return th9xSim->knobs[chan]->getValue();
+    return th9xSim->knobs[chan-NUM_STICKS]->getValue();
 }
@@ -43,7 +43,7 @@
 const pm_char stamp1[] PROGMEM = " SVN: " SVN_STR;
 const pm_char stamp2[] PROGMEM = "DATE: " DATE_STR;
 const pm_char stamp3[] PROGMEM = "TIME: " TIME_STR;
-#if defined(CPUM64)
+#if defined(PCBSTD)
 const pm_char eeprom_stamp[] PROGMEM = "EEPR: " DEFNUMSTR(EEPROM_VER) "-" DEFNUMSTR(EEPROM_VARIANT);
 #else
 const pm_char eeprom_stamp[] PROGMEM = "EEPR: " DEFNUMSTR(EEPROM_VER);
@@ -60,7 +60,7 @@

 volatile uint16_t Analog_values[NUMBER_ANALOG];
 #if !defined(REV3)
-const char ana_direction[NUMBER_ANALOG] = {0,1,1,1,  1,0,1,0,  0};
+const char ana_direction[NUMBER_ANALOG] = {0,1,1,1,  1,1,1,0,  0};
 #endif

 void adcInit()
@@ -221,14 +221,14 @@ void boardInit()
  usbInit();
  
  //Temporary: Configure second PPM pin as input (done after USB init in case the lib already initialises USB_ID)
-  GPIO_InitTypeDef GPIO_InitStructure;
-  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIO_EXTPPM, ENABLE);
-  GPIO_InitStructure.GPIO_Pin = PIN_EXTPPM_OUT;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
-  GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
-  GPIO_Init(GPIO_EXTPPM, &GPIO_InitStructure);
+//  GPIO_InitTypeDef GPIO_InitStructure;
+//  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIO_EXTPPM, ENABLE);
+//  GPIO_InitStructure.GPIO_Pin = PIN_EXTPPM_OUT;
+//  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
+//  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+//  GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
+//  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
+//  GPIO_Init(GPIO_EXTPPM, &GPIO_InitStructure);
 }
 #endif

@@ -84,7 +84,8 @@ uint8_t usbPlugged(void);
 #define BOOTLOADER_REQUEST() (0)
 #define usbBootloader()

-#define SLAVE_MODE()         (0/*pwrCheck() == e_power_trainer*/)
+#define SLAVE_MODE()         (g_model.trainerMode == 1)
+#define TRAINER_CONNECTED()  (GPIO_ReadInputDataBit(GPIOTRNDET, PIN_TRNDET) == Bit_RESET)

 void delaysInit();

@@ -113,15 +114,16 @@ uint32_t sdMounted();
 #endif

 // Pulses driver
-void init_main_ppm();
-void disable_main_ppm();
-void init_pxx();
-void disable_pxx();
+void init_ppm( uint32_t module_index );
+void disable_ppm( uint32_t module_index );
+void init_pxx( uint32_t module_index );
+void disable_pxx( uint32_t module_index );

 // Trainer driver
 void init_trainer_ppm();
 void stop_trainer_ppm();
 void init_trainer_capture();
+void stop_trainer_ppm() ;

 // Keys driver
 void keysInit();
@@ -164,7 +166,7 @@ void pwrOff();
 #define setBacklight(xx)
 #define __BACKLIGHT_ON    GPIO_SetBits(GPIOB, GPIO_Pin_BL)
 #define __BACKLIGHT_OFF   GPIO_ResetBits(GPIOB, GPIO_Pin_BL)
-#define IS_BACKLIGHT_ON() GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_BL)
+#define IS_BACKLIGHT_ON() GPIO_IsSet(GPIOB, GPIO_Pin_BL)

 // USB driver
 void usbInit(void);
@@ -36,72 +36,136 @@

 #include "../opentx.h"

+#define EXTERNAL_TEST 0
+
+// CURRENTLY EXPECTS ONLY PXX ON THE INTERNAL SIGNAL, PPM ALLOWED ON THE EXTERNAL SIGNAL
+
 // TODO not here!
-void setupPulses();
-void setupPulsesPPM();
-void setupPulsesPXX();
+void setupPulses( uint32_t module );
+void setupPulsesPPM() ;
+void setupPulsesPXX( uint32_t module );

 uint16_t *ppmStreamPtr;
+uint16_t *ppm2StreamPtr;
 extern uint16_t ppmStream[20];
+extern uint16_t ppm2Stream[20];
 extern uint16_t pxxStream[400] ;
+extern uint16_t pxx2Stream[400] ;

-void init_pxx()
+#define	INT_MODULE	0
+#define	EXT_MODULE	0
+
+static void init_pa10_pxx( void ) ;
+static void disable_pa10_pxx( void ) ;
+static void init_pa10_ppm( void ) ;
+static void disable_pa10_ppm( void ) ;
+static void init_pa7_pxx( void ) ;
+static void disable_pa7_pxx( void ) ;
+static void init_pa7_ppm( void ) ;
+static void disable_pa7_ppm( void ) ;
+
+void init_pxx( uint32_t module_index )
 {
-  INTERNAL_RF_ON();
+	if ( module_index )
+	{
+		init_pa10_pxx() ;	
+	}
+	else
+	{
+		init_pa7_pxx() ;
+	}
+}

-  // Timer1
-  setupPulsesPXX() ; // TODO not here!
+void disable_pxx( uint32_t module_index )
+{
+	if ( module_index )
+	{
+		disable_pa10_pxx() ;	
+	}
+	else
+	{
+		disable_pa7_pxx() ;
+	}
+}
+
+void init_ppm( uint32_t module_index )
+{
+	if ( module_index )
+	{
+		init_pa10_ppm() ;	
+	}
+	else
+	{
+		init_pa7_ppm() ;	
+	}
+}
+
+void disable_ppm( uint32_t module_index )
+{
+	if ( module_index )
+	{
+		disable_pa10_ppm() ;
+	}
+	else
+	{
+		disable_pa7_ppm() ;
+	}
+}
+
+
+static void init_pa10_pxx()
+{
+  EXTERNAL_RF_ON();
+
+  // Timer1, channel 3
+  setupPulsesPXX(EXT_MODULE) ; // TODO not here!

  RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN ;           // Enable portA clock
-#if defined(REV3)
-  configure_pins( 0x0100, PIN_PERIPHERAL | PIN_PORTA | PIN_PER_1 | PIN_OS25 | PIN_PUSHPULL ) ;
-#else
  GPIO_InitTypeDef GPIO_InitStructure;
-  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOCPPM, ENABLE);
-  GPIO_PinAFConfig(GPIOCPPM, GPIO_PinSource_CPPM, GPIO_AF_TIM1);
-  GPIO_InitStructure.GPIO_Pin = PIN_CPPM_OUT;
+//  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOCPPM, ENABLE);
+  
+	GPIO_PinAFConfig(GPIO_EXTPPM, GPIO_PinSource_EXTPPM, GPIO_AF_TIM1);
+  GPIO_InitStructure.GPIO_Pin = PIN_EXTPPM_OUT;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
  GPIO_Init(GPIOCPPM, &GPIO_InitStructure);
-#endif
-  RCC->APB2ENR |= RCC_APB2ENR_TIM1EN ;            // Enable clock
-  RCC->AHB1ENR |= RCC_AHB1ENR_DMA2EN ;                    // Enable DMA1 clock
+  
+	RCC->APB2ENR |= RCC_APB2ENR_TIM1EN ;            // Enable clock
+  RCC->AHB1ENR |= RCC_AHB1ENR_DMA2EN ;            // Enable DMA2 clock

  TIM1->CR1 &= ~TIM_CR1_CEN ;
  TIM1->ARR = 18000 ;                     // 9mS
  TIM1->CCR2 = 15000 ;            // Update time
  TIM1->PSC = (PERI2_FREQUENCY * TIMER_MULT_APB2) / 2000000 - 1 ;               // 0.5uS from 30MHz
-#if defined(REV3)
-  TIM1->CCER = TIM_CCER_CC1E | TIM_CCER_CC1P ;
-#else
-  TIM1->CCER = TIM_CCER_CC1NE ;
-#endif
-  TIM1->CR2 = TIM_CR2_OIS1 ;                      // O/P idle high
+  
+	TIM1->CCER = TIM_CCER_CC3E ;
+  
+	TIM1->CR2 = TIM_CR2_OIS3 ;              // O/P idle high
  TIM1->BDTR = TIM_BDTR_MOE ;             // Enable outputs
-  TIM1->CCR1 = pxxStream[0] ;
-  TIM1->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0 ;                     // Force O/P high
+  TIM1->CCR3 = pxxStream[0] ;
+  TIM1->CCMR2 = TIM_CCMR2_OC3M_2 | TIM_CCMR2_OC3M_0 ;                     // Force O/P high
  TIM1->EGR = 1 ;                                                         // Restart

-//      TIM1->SR &= ~TIM_SR_UIF ;                               // Clear flag
-//      TIM1->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
-  TIM1->DIER |= TIM_DIER_CC1DE ;          // Enable DMA on CC1 match
-  TIM1->DCR = 13 ;                                                                // DMA to CC1
+//      TIM1->SR &= ~TIM_SR_UIF ;             // Clear flag
+//      TIM1->SR &= ~TIM_SR_CC2IF ;           // Clear flag
+  TIM1->DIER |= TIM_DIER_CC3DE ;          		// Enable DMA on CC3 match
+  TIM1->DCR = 15 ;                            // DMA to CC1

 //      TIM1->CR1 = TIM_CR1_OPM ;                               // Just run once
-        // Enable the DMA channel here, DMA2 stream 1, channel 6
-  DMA2_Stream1->CR &= ~DMA_SxCR_EN ;              // Disable DMA
-  DMA2->LIFCR = DMA_LIFCR_CTCIF1 | DMA_LIFCR_CHTIF1 | DMA_LIFCR_CTEIF1 | DMA_LIFCR_CDMEIF1 | DMA_LIFCR_CFEIF1 ; // Write ones to clear bits
-  DMA2_Stream1->CR = DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_2 | DMA_SxCR_PL_0 | DMA_SxCR_MSIZE_0
-                                                                                 | DMA_SxCR_PSIZE_0 | DMA_SxCR_MINC | DMA_SxCR_DIR_0 | DMA_SxCR_PFCTRL ;
-  DMA2_Stream1->PAR = CONVERT_PTR(&TIM1->DMAR);
-  DMA2_Stream1->M0AR = CONVERT_PTR(&pxxStream[1]);
-//      DMA2_Stream1->FCR = 0x05 ; //DMA_SxFCR_DMDIS | DMA_SxFCR_FTH_0 ;
-//      DMA2_Stream1->NDTR = 100 ;
-  DMA2_Stream1->CR |= DMA_SxCR_EN ;               // Enable DMA
+        // Enable the DMA channel here, DMA2 stream 6, channel 6
+  DMA2_Stream6->CR &= ~DMA_SxCR_EN ;              // Disable DMA
+  DMA2->HIFCR = DMA_HIFCR_CTCIF6 | DMA_HIFCR_CHTIF6 | DMA_HIFCR_CTEIF6 | DMA_HIFCR_CDMEIF6 | DMA_HIFCR_CFEIF6 ; // Write ones to clear bits
+  DMA2_Stream6->CR = DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_2 | DMA_SxCR_PL_0 | DMA_SxCR_MSIZE_0
+                                                         | DMA_SxCR_PSIZE_0 | DMA_SxCR_MINC | DMA_SxCR_DIR_0 | DMA_SxCR_PFCTRL ;
+  DMA2_Stream6->PAR = CONVERT_PTR(&TIM1->DMAR);
+  DMA2_Stream6->M0AR = CONVERT_PTR(&pxxStream[1]);
+//      DMA2_Stream2->FCR = 0x05 ; //DMA_SxFCR_DMDIS | DMA_SxFCR_FTH_0 ;
+//      DMA2_Stream2->NDTR = 100 ;
+  DMA2_Stream6->CR |= DMA_SxCR_EN ;               // Enable DMA

-  TIM1->CCMR1 = TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0 ;                     // Toggle CC1 o/p
+  TIM1->CCMR2 = TIM_CCMR2_OC3M_1 | TIM_CCMR2_OC3M_0 ;                     // Toggle CC1 o/p
  TIM1->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
  TIM1->DIER |= TIM_DIER_CC2IE ;  // Enable this interrupt
  TIM1->CR1 |= TIM_CR1_CEN ;
@@ -109,18 +173,19 @@ void init_pxx()
  NVIC_EnableIRQ(TIM1_CC_IRQn) ;
 }

-void disable_pxx()
+static void disable_pa10_pxx()
 {
+  DMA2_Stream6->CR &= ~DMA_SxCR_EN ;              // Disable DMA
  NVIC_DisableIRQ(TIM1_CC_IRQn) ;
  TIM1->DIER &= ~TIM_DIER_CC2IE ;
  TIM1->CR1 &= ~TIM_CR1_CEN ;
-  INTERNAL_RF_OFF();
+  EXTERNAL_RF_OFF();
 }

 // PPM output
 // Timer 1, channel 1 on PA8 for prototype
 // Pin is AF1 function for timer 1
-void init_main_ppm()
+static void init_pa10_ppm()
 {
  EXTERNAL_RF_ON();
  // Timer1
@@ -128,22 +193,20 @@ void init_main_ppm()
  ppmStreamPtr = ppmStream ;

  RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN ;           // Enable portA clock
-#if defined(REV3)
-  configure_pins( 0x0100, PIN_PERIPHERAL | PIN_PORTA | PIN_PER_1 | PIN_OS25 | PIN_PUSHPULL ) ;
-#else
-  configure_pins( 0x0080, PIN_PERIPHERAL | PIN_PORTA | PIN_PER_1 | PIN_OS25 | PIN_PUSHPULL ) ;
-#endif
-  RCC->APB2ENR |= RCC_APB2ENR_TIM1EN ;            // Enable clock

+  configure_pins( PIN_EXTPPM_OUT, PIN_PERIPHERAL | PIN_PORTA | PIN_PER_1 | PIN_OS25 | PIN_PUSHPULL ) ;
+  
+	RCC->APB2ENR |= RCC_APB2ENR_TIM1EN ;            // Enable clock
+
+  TIM1->CR1 &= ~TIM_CR1_CEN ;
  TIM1->ARR = *ppmStreamPtr++ ;
  TIM1->PSC = (PERI2_FREQUENCY * TIMER_MULT_APB2) / 2000000 - 1 ;               // 0.5uS from 30MHz
-#if defined(REV3)
-  TIM1->CCER = TIM_CCER_CC1E ;
-#else
-  TIM1->CCER = TIM_CCER_CC1NE | TIM_CCER_CC1NP ;
-#endif
-  TIM1->CCMR1 = TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC2PE ;                   // PWM mode 1
-  TIM1->CCR1 = 600 ;              // 300 uS pulse
+  
+	TIM1->CCER = TIM_CCER_CC3E ;
+  
+	TIM1->CCMR2 = TIM_CCMR2_OC3M_1 | TIM_CCMR2_OC3M_2 ;     // PWM mode 1
+  TIM1->CCMR1 = TIM_CCMR1_OC2PE ;                   			// PWM mode 1
+  TIM1->CCR3 = 600 ;    // 300 uS pulse  ?? (g_model.ppmDelay*50+300)*2 ??
  TIM1->BDTR = TIM_BDTR_MOE ;
  TIM1->EGR = 1 ;
  TIM1->DIER = TIM_DIER_UDE ;
@@ -158,12 +221,23 @@ void init_main_ppm()
  NVIC_EnableIRQ(TIM1_UP_TIM10_IRQn) ;
 }

-void disable_main_ppm()
+static void disable_pa10_ppm()
 {
  NVIC_DisableIRQ(TIM1_CC_IRQn) ;
  NVIC_DisableIRQ(TIM1_UP_TIM10_IRQn) ;
  TIM1->DIER &= ~TIM_DIER_CC2IE & ~TIM_DIER_UIE ;
  TIM1->CR1 &= ~TIM_CR1_CEN ;
+  
+	// Make pin an input
+	GPIO_InitTypeDef GPIO_InitStructure;
+  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIO_EXTPPM, ENABLE);
+  GPIO_InitStructure.GPIO_Pin = PIN_EXTPPM_OUT;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
+  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+  GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
+  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
+  GPIO_Init(GPIO_EXTPPM, &GPIO_InitStructure);
+
  EXTERNAL_RF_OFF();
 }

@@ -172,14 +246,14 @@ extern "C" void TIM1_CC_IRQHandler()
  TIM1->DIER &= ~TIM_DIER_CC2IE ;         // stop this interrupt
  TIM1->SR &= ~TIM_SR_CC2IF ;                             // Clear flag

-  setupPulses() ;
+  setupPulses(1) ;

  if (s_current_protocol == PROTO_PXX) {
-    DMA2_Stream1->CR &= ~DMA_SxCR_EN ;              // Disable DMA
-    DMA2->LIFCR = DMA_LIFCR_CTCIF1 | DMA_LIFCR_CHTIF1 | DMA_LIFCR_CTEIF1 | DMA_LIFCR_CDMEIF1 | DMA_LIFCR_CFEIF1 ; // Write ones to clear bits
-    DMA2_Stream1->M0AR = CONVERT_PTR(&pxxStream[1]);
-    DMA2_Stream1->CR |= DMA_SxCR_EN ;               // Enable DMA
-    TIM1->CCR1 = pxxStream[0] ;
+    DMA2_Stream6->CR &= ~DMA_SxCR_EN ;              // Disable DMA
+  	DMA2->HIFCR = DMA_HIFCR_CTCIF6 | DMA_HIFCR_CHTIF6 | DMA_HIFCR_CTEIF6 | DMA_HIFCR_CDMEIF6 | DMA_HIFCR_CFEIF6 ; // Write ones to clear bits
+    DMA2_Stream6->M0AR = CONVERT_PTR(&pxxStream[1]);
+    DMA2_Stream6->CR |= DMA_SxCR_EN ;               // Enable DMA
+    TIM1->CCR3 = pxxStream[0] ;
    TIM1->DIER |= TIM_DIER_CC2IE ;  // Enable this interrupt
  }
  else {
@@ -202,3 +276,183 @@ extern "C" void TIM1_UP_TIM10_IRQHandler()
    TIM1->DIER |= TIM_DIER_CC2IE ;  // Enable this interrupt
  }
 }
+
+
+
+static void init_pa7_pxx()
+{
+#if EXTERNAL_TEST
+	init_pa10_pxx() ;
+	return ;
+#endif
+  INTERNAL_RF_ON();
+
+  // Timer8
+  setupPulsesPXX(INT_MODULE) ; // TODO not here!
+
+  RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN ;           // Enable portA clock
+#if defined(REV3)
+  configure_pins( PIN_CPPM_OUT, PIN_PERIPHERAL | PIN_PORTA | PIN_PER_1 | PIN_OS25 | PIN_PUSHPULL ) ;
+#else
+  GPIO_InitTypeDef GPIO_InitStructure;
+  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOCPPM, ENABLE);
+  GPIO_PinAFConfig(GPIOCPPM, GPIO_PinSource_CPPM, GPIO_AF_TIM8);
+  GPIO_InitStructure.GPIO_Pin = PIN_CPPM_OUT;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
+  GPIO_Init(GPIOCPPM, &GPIO_InitStructure);
+#endif
+  RCC->APB2ENR |= RCC_APB2ENR_TIM8EN ;            // Enable clock
+  RCC->AHB1ENR |= RCC_AHB1ENR_DMA2EN ;            // Enable DMA2 clock
+
+  TIM8->CR1 &= ~TIM_CR1_CEN ;
+  TIM8->ARR = 18000 ;                     // 9mS
+  TIM8->CCR2 = 15000 ;            // Update time
+  TIM8->PSC = (PERI2_FREQUENCY * TIMER_MULT_APB2) / 2000000 - 1 ;               // 0.5uS from 30MHz
+#if defined(REV3)
+  TIM8->CCER = TIM_CCER_CC1E | TIM_CCER_CC1P ;
+#else
+  TIM8->CCER = TIM_CCER_CC1NE ;
+#endif
+  TIM8->CR2 = TIM_CR2_OIS1 ;                      // O/P idle high
+  TIM8->BDTR = TIM_BDTR_MOE ;             // Enable outputs
+  TIM8->CCR1 = pxxStream[0] ;
+  TIM8->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0 ;                     // Force O/P high
+  TIM8->EGR = 1 ;                                                         // Restart
+
+//      TIM8->SR &= ~TIM_SR_UIF ;                               // Clear flag
+//      TIM8->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
+  TIM8->DIER |= TIM_DIER_CC1DE ;          // Enable DMA on CC1 match
+  TIM8->DCR = 13 ;                                                                // DMA to CC1
+
+//      TIM8->CR1 = TIM_CR1_OPM ;                               // Just run once
+        // Enable the DMA channel here, DMA2 stream 2, channel 7
+  DMA2_Stream2->CR &= ~DMA_SxCR_EN ;              // Disable DMA
+  DMA2->LIFCR = DMA_LIFCR_CTCIF2 | DMA_LIFCR_CHTIF2 | DMA_LIFCR_CTEIF2 | DMA_LIFCR_CDMEIF2 | DMA_LIFCR_CFEIF2 ; // Write ones to clear bits
+  DMA2_Stream2->CR = DMA_SxCR_CHSEL_0 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_2 | DMA_SxCR_PL_0 | DMA_SxCR_MSIZE_0
+                                                         | DMA_SxCR_PSIZE_0 | DMA_SxCR_MINC | DMA_SxCR_DIR_0 | DMA_SxCR_PFCTRL ;
+  DMA2_Stream2->PAR = CONVERT_PTR(&TIM8->DMAR);
+  DMA2_Stream2->M0AR = CONVERT_PTR(&pxxStream[1]);
+//      DMA2_Stream2->FCR = 0x05 ; //DMA_SxFCR_DMDIS | DMA_SxFCR_FTH_0 ;
+//      DMA2_Stream2->NDTR = 100 ;
+  DMA2_Stream2->CR |= DMA_SxCR_EN ;               // Enable DMA
+
+  TIM8->CCMR1 = TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0 ;                     // Toggle CC1 o/p
+  TIM8->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
+  TIM8->DIER |= TIM_DIER_CC2IE ;  // Enable this interrupt
+  TIM8->CR1 |= TIM_CR1_CEN ;
+//  NVIC_SetPriority(TIM8_CC_IRQn, 1); // Debug - high priority, doesn't help
+  NVIC_EnableIRQ(TIM8_CC_IRQn) ;
+}
+
+static void disable_pa7_pxx()
+{
+#if EXTERNAL_TEST
+	disable_pa10_pxx() ;
+	return ;
+#endif
+  DMA2_Stream2->CR &= ~DMA_SxCR_EN ;              // Disable DMA
+  NVIC_DisableIRQ(TIM8_CC_IRQn) ;
+  TIM8->DIER &= ~TIM_DIER_CC2IE ;
+  TIM8->CR1 &= ~TIM_CR1_CEN ;
+  INTERNAL_RF_OFF();
+}
+
+// PPM output
+// Timer 1, channel 1 on PA8 for prototype
+// Pin is AF1 function for timer 1
+static void init_pa7_ppm()
+{
+#if EXTERNAL_TEST
+	init_pa10_ppm() ;
+	return ;
+#endif
+  INTERNAL_RF_ON();
+  // Timer1
+  setupPulsesPPM() ;
+  ppmStreamPtr = ppmStream ;
+
+  RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN ;           // Enable portA clock
+#if defined(REV3)
+  configure_pins( 0x0100, PIN_PERIPHERAL | PIN_PORTA | PIN_PER_1 | PIN_OS25 | PIN_PUSHPULL ) ;
+#else
+  configure_pins( 0x0080, PIN_PERIPHERAL | PIN_PORTA | PIN_PER_3 | PIN_OS25 | PIN_PUSHPULL ) ;
+#endif
+  RCC->APB2ENR |= RCC_APB2ENR_TIM8EN ;            // Enable clock
+
+  TIM8->CR1 &= ~TIM_CR1_CEN ;
+  
+	TIM8->ARR = *ppmStreamPtr++ ;
+  TIM8->PSC = (PERI2_FREQUENCY * TIMER_MULT_APB2) / 2000000 - 1 ;               // 0.5uS from 30MHz
+#if defined(REV3)
+  TIM8->CCER = TIM_CCER_CC1E ;
+#else
+  TIM8->CCER = TIM_CCER_CC1NE | TIM_CCER_CC1NP ;
+#endif
+  TIM8->CCMR1 = TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC2PE ;                   // PWM mode 1
+  TIM8->CCR1 = 600 ;  // 300 uS pulse ?? (g_model.ppmDelay*50+300)*2 ??
+  TIM8->BDTR = TIM_BDTR_MOE ;
+  TIM8->EGR = 1 ;
+  TIM8->DIER = TIM_DIER_UDE ;
+
+  TIM8->SR &= ~TIM_SR_UIF ;                               // Clear flag
+  TIM8->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
+  TIM8->DIER |= TIM_DIER_CC2IE ;
+  TIM8->DIER |= TIM_DIER_UIE ;
+
+  TIM8->CR1 = TIM_CR1_CEN ;
+  NVIC_EnableIRQ(TIM8_CC_IRQn) ;
+  NVIC_EnableIRQ(TIM8_UP_TIM13_IRQn) ;
+}
+
+static void disable_pa7_ppm()
+{
+#if EXTERNAL_TEST
+	disable_pa10_ppm() ;
+	return ;
+#endif
+  NVIC_DisableIRQ(TIM8_CC_IRQn) ;
+  NVIC_DisableIRQ(TIM8_UP_TIM13_IRQn) ;
+  TIM8->DIER &= ~TIM_DIER_CC2IE & ~TIM_DIER_UIE ;
+  TIM8->CR1 &= ~TIM_CR1_CEN ;
+  INTERNAL_RF_OFF();
+}
+
+extern "C" void TIM8_CC_IRQHandler()
+{
+  TIM8->DIER &= ~TIM_DIER_CC2IE ;         // stop this interrupt
+  TIM8->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
+
+  setupPulses(INT_MODULE) ;
+
+  if (s_current_protocol == PROTO_PXX) {
+    DMA2_Stream2->CR &= ~DMA_SxCR_EN ;              // Disable DMA
+    DMA2->LIFCR = DMA_LIFCR_CTCIF2 | DMA_LIFCR_CHTIF2 | DMA_LIFCR_CTEIF2 | DMA_LIFCR_CDMEIF2 | DMA_LIFCR_CFEIF2 ; // Write ones to clear bits
+    DMA2_Stream2->M0AR = CONVERT_PTR(&pxxStream[1]);
+    DMA2_Stream2->CR |= DMA_SxCR_EN ;               // Enable DMA
+    TIM8->CCR1 = pxxStream[0] ;
+    TIM8->DIER |= TIM_DIER_CC2IE ;  // Enable this interrupt
+  }
+  else {
+    ppmStreamPtr = ppmStream ;
+
+    TIM8->DIER |= TIM_DIER_UDE ;
+    TIM8->SR &= ~TIM_SR_UIF ;                                       // Clear this flag
+    TIM8->DIER |= TIM_DIER_UIE ;                            // Enable this interrupt
+  }
+}
+
+extern "C" void TIM8_UP_TIM13_IRQHandler()
+{
+  TIM8->SR &= ~TIM_SR_UIF ;                               // Clear flag
+
+  TIM8->ARR = *ppmStreamPtr++ ;
+  if ( *ppmStreamPtr == 0 )
+  {
+    TIM8->SR &= ~TIM_SR_CC2IF ;                     // Clear this flag
+    TIM8->DIER |= TIM_DIER_CC2IE ;  // Enable this interrupt
+  }
+}
+
@@ -48,10 +48,6 @@ uint32_t pwrCheck()
 #else
  if (GPIO_ReadInputDataBit(GPIOPWR, PIN_PWR_STATUS) == Bit_RESET)
    return e_power_on;
-#if !defined(REV3)
-  else if (GPIO_ReadInputDataBit(GPIOTRNDET, PIN_TRNDET) == Bit_SET)
-    return e_power_trainer;
-#endif
  else if (usbPlugged())
    return e_power_usb;
  else
@@ -57,7 +57,7 @@ void setupTrainerPulses()
  int16_t PPM_range = g_model.extendedLimits ? 640 * 2 : 512 * 2; //range of 0.7..1.7msec

  uint16_t *ptr ;
-  uint32_t p=8+g_model.ppmNCH*2; //Channels *2
+  uint32_t p = NUM_CHANNELS(0);

  ptr = TrainerPpmStream ;

@@ -72,72 +72,48 @@ void setupTrainerPulses()
  *ptr++ = rest ;
  *ptr = 0 ;

-  TIM8->CCR2 = rest - 1000 ;             // Update time
-  TIM8->CCR4 = (g_model.ppmDelay*50+300)*2 ;
+  TIM3->CCR2 = rest - 1000 ;             // Update time
+  TIM3->CCR4 = (g_model.ppmDelay*50+300)*2 ;
 }

-// Trainer PPM oputput PC9, Timer 8 channel 4
+// Trainer PPM oputput PC9, Timer 3 channel 4, (Alternate Function 2)
 void init_trainer_ppm()
 {
  setupTrainerPulses() ;
  TrainerPulsePtr = TrainerPpmStream ;

  RCC->AHB1ENR |= RCC_AHB1ENR_GPIOCEN ;           // Enable portC clock
-  configure_pins( 0x0200, PIN_PERIPHERAL | PIN_PORTC | PIN_PER_3 | PIN_OS25 | PIN_PUSHPULL ) ;
-  RCC->APB2ENR |= RCC_APB2ENR_TIM8EN ;            // Enable clock
+  configure_pins( PIN_TR_PPM_OUT, PIN_PERIPHERAL | PIN_PORTC | PIN_PER_3 | PIN_OS25 | PIN_PUSHPULL ) ;
+  configure_pins( PIN_TR_PPM_IN, PIN_PORTA | PIN_INPUT ) ;
+  RCC->APB1ENR |= RCC_APB1ENR_TIM3EN ;            // Enable clock

-  TIM8->ARR = *TrainerPulsePtr++ ;
-  TIM8->PSC = (PERI2_FREQUENCY * TIMER_MULT_APB2) / 2000000 - 1 ;               // 0.5uS from 30MHz
-  TIM8->CCER = TIM_CCER_CC4E ;
-  TIM8->CCMR2 = TIM_CCMR2_OC4M_1 | TIM_CCMR2_OC4M_2 | TIM_CCMR2_OC4PE ;                   // PWM mode 1
-  TIM8->CCR4 = 600 ;              // 300 uS pulse
-  TIM8->BDTR = TIM_BDTR_MOE ;
-  TIM8->EGR = 1 ;
-  // TIM8->DIER = TIM_DIER_UDE ;
+  TIM3->ARR = *TrainerPulsePtr++ ;
+  TIM3->PSC = (PERI1_FREQUENCY * TIMER_MULT_APB1) / 2000000 - 1 ;               // 0.5uS
+  TIM3->CCER = TIM_CCER_CC4E ;
+  TIM3->CCMR2 = TIM_CCMR2_OC4M_1 | TIM_CCMR2_OC4M_2 | TIM_CCMR2_OC4PE ;                   // PWM mode 1
+  TIM3->CCR4 = 600 ;              // 300 uS pulse
+  TIM3->BDTR = TIM_BDTR_MOE ;
+  TIM3->EGR = 1 ;
+  // TIM3->DIER = TIM_DIER_UDE ;

-  TIM8->SR &= ~TIM_SR_UIF ;                               // Clear flag
-  TIM8->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
-  TIM8->DIER |= TIM_DIER_CC2IE ;
-  TIM8->DIER |= TIM_DIER_UIE ;
+  TIM3->SR &= ~TIM_SR_UIF ;                               // Clear flag
+  TIM3->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
+  TIM3->DIER |= TIM_DIER_CC2IE ;
+  TIM3->DIER |= TIM_DIER_UIE ;

-  TIM8->CR1 = TIM_CR1_CEN ;
-  NVIC_EnableIRQ(TIM8_CC_IRQn) ;
-  NVIC_EnableIRQ(TIM8_UP_TIM13_IRQn) ;
+  TIM3->CR1 = TIM_CR1_CEN ;
+  NVIC_EnableIRQ(TIM3_IRQn) ;
+//  NVIC_EnableIRQ(TIM8_UP_TIM13_IRQn) ;
 }

 // TODO - testing
 void stop_trainer_ppm()
 {
-  configure_pins( 0x0200, PIN_INPUT | PIN_PORTC ) ;
-  TIM8->CR1 &= ~TIM_CR1_CEN ;                             // Stop counter
-  NVIC_DisableIRQ(TIM8_CC_IRQn) ;                         // Stop Interrupt
-  NVIC_DisableIRQ(TIM8_UP_TIM13_IRQn) ; // Stop Interrupt
-}
-
-extern "C" void TIM8_CC_IRQHandler()
-{
-  TIM8->DIER &= ~TIM_DIER_CC2IE ;         // stop this interrupt
-  TIM8->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
-
-  setupTrainerPulses() ;
-
-  TrainerPulsePtr = TrainerPpmStream ;
-  TIM8->DIER |= TIM_DIER_UDE ;
-
-  TIM8->SR &= ~TIM_SR_UIF ;                                       // Clear this flag
-  TIM8->DIER |= TIM_DIER_UIE ;                            // Enable this interrupt
-}
-
-extern "C" void TIM8_UP_TIM13_IRQHandler()
-{
-  TIM8->SR &= ~TIM_SR_UIF ;                               // Clear flag
-
-  TIM8->ARR = *TrainerPulsePtr++ ;
-  if ( *TrainerPulsePtr == 0 )
-  {
-          TIM8->SR &= ~TIM_SR_CC2IF ;                     // Clear this flag
-          TIM8->DIER |= TIM_DIER_CC2IE ;  // Enable this interrupt
-  }
+  configure_pins( PIN_TR_PPM_OUT, PIN_INPUT | PIN_PORTC ) ; // Pin as input
+  TIM3->CR1 &= ~TIM_CR1_CEN ;                             // Stop counter
+  TIM3->DIER &= ~TIM_DIER_CC2IE ;                      // Stop Interrupt
+  TIM3->DIER &= ~TIM_DIER_UIE ;                        // Stop Interrupt
+  NVIC_DisableIRQ(TIM3_IRQn) ;                         // Stop Interrupt
 }

 // Trainer capture, PC8, Timer 3 channel 3
@@ -152,12 +128,18 @@ void init_trainer_capture()
  TIM3->CR2 = 0 ;
  TIM3->CCMR2 = TIM_CCMR2_IC3F_0 | TIM_CCMR2_IC3F_1 | TIM_CCMR2_CC3S_0 ;
  TIM3->CCER = TIM_CCER_CC3E ;
-  TIM3->SR &= ~TIM_SR_CC3IF ;                             // Clear flag
+  TIM3->SR &= ~TIM_SR_CC3IF & ~TIM_SR_CC2IF & ~TIM_SR_UIF ;  // Clear flags
  TIM3->DIER |= TIM_DIER_CC3IE ;
  TIM3->CR1 = TIM_CR1_CEN ;
  NVIC_EnableIRQ(TIM3_IRQn) ;
 }

+void stop_trainer_capture()
+{
+  TIM3->CR1 &= ~TIM_CR1_CEN ;                          // Stop counter
+  TIM3->DIER &= ~TIM_DIER_CC3IE ;                      // Stop Interrupt
+  NVIC_DisableIRQ(TIM3_IRQn) ;                         // Stop Interrupt
+}

 extern "C" void TIM3_IRQHandler()
 {
@@ -165,25 +147,58 @@ extern "C" void TIM3_IRQHandler()
  static uint16_t lastCapt ;
  uint16_t val ;

-  capture = TIM3->CCR3 ;
+	// What mode? in or out?
+  if ( (TIM3->DIER & TIM_DIER_CC3IE ) && ( TIM3->SR & TIM_SR_CC3IF ) )
+	{
+		// capture mode
+	  capture = TIM3->CCR3 ;

-  val = (uint16_t)(capture - lastCapt) / 2 ;
-  lastCapt = capture;
+	  val = (uint16_t)(capture - lastCapt) / 2 ;
+	  lastCapt = capture;

-  // We prcoess g_ppmInsright here to make servo movement as smooth as possible
-  //    while under trainee control
-  if ((val>4000) && (val < 19000)) { // G: Prioritize reset pulse. (Needed when less than 8 incoming pulses)
-    ppmInState = 1; // triggered
-  }
-  else {
-    if(ppmInState && (ppmInState<=8)) {
-      if ((val>800) && (val<2200)) {
-        g_ppmIns[ppmInState++ - 1] = (int16_t)(val - 1500)*(g_eeGeneral.PPM_Multiplier+10)/10; //+-500 != 512, but close enough.
-      }
-      else {
-        ppmInState = 0; // not triggered
-      }
-    }
-  }
+	  // We prcoess g_ppmInsright here to make servo movement as smooth as possible
+	  //    while under trainee control
+	  if ((val>4000) && (val < 19000)) { // G: Prioritize reset pulse. (Needed when less than 8 incoming pulses)
+	    ppmInState = 1; // triggered
+	  }
+	  else {
+	    if(ppmInState && (ppmInState<=8)) {
+	      if ((val>800) && (val<2200)) {
+	        g_ppmIns[ppmInState++ - 1] = (int16_t)(val - 1500)*(g_eeGeneral.PPM_Multiplier+10)/10; //+-500 != 512, but close enough.
+	      }
+	      else {
+	        ppmInState = 0; // not triggered
+	      }
+	    }
+	  }
+	}
+	// PPM out compare interrupt
+	if ( ( TIM3->DIER & TIM_DIER_CC2IE ) && ( TIM3->SR & TIM_SR_CC2IF ) )
+	{ // compare interrupt
+  	TIM3->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
+  	TIM3->DIER &= ~TIM_DIER_CC2IE ;         // stop this interrupt
+  	TIM3->SR &= ~TIM_SR_CC2IF ;                             // Clear flag
+
+  	setupTrainerPulses() ;
+
+  	TrainerPulsePtr = TrainerPpmStream ;
+  	TIM3->DIER |= TIM_DIER_UDE ;
+
+  	TIM3->SR &= ~TIM_SR_UIF ;                                       // Clear this flag
+  	TIM3->DIER |= TIM_DIER_UIE ;                            // Enable this interrupt
+	}
+	
+	// PPM out update interrupt
+	if ( (TIM3->DIER & TIM_DIER_UIE) && ( TIM3->SR & TIM_SR_UIF ) )
+	{
+	  TIM3->SR &= ~TIM_SR_UIF ;                               // Clear flag
+
+	  TIM3->ARR = *TrainerPulsePtr++ ;
+  	if ( *TrainerPulsePtr == 0 )
+	  {
+  	  TIM3->SR &= ~TIM_SR_CC2IF ;                     // Clear this flag
+    	TIM3->DIER |= TIM_DIER_CC2IE ;  // Enable this interrupt
+	  }
+	}
 }

@@ -49,7 +49,7 @@ void USB_OTG_BSP_Init(USB_OTG_CORE_HANDLE *pdev)
  RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_GPIOA , ENABLE);  
  
  /* Configure SOF ID DM DP Pins */
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8  | 
+  GPIO_InitStructure.GPIO_Pin = // GPIO_Pin_8  | 
                                GPIO_Pin_11 | 
                                GPIO_Pin_12;
  
@@ -59,7 +59,7 @@ void USB_OTG_BSP_Init(USB_OTG_CORE_HANDLE *pdev)
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
  GPIO_Init(GPIOA, &GPIO_InitStructure);  
  
-  GPIO_PinAFConfig(GPIOA,GPIO_PinSource8,GPIO_AF_OTG1_FS) ;
+  //GPIO_PinAFConfig(GPIOA,GPIO_PinSource8,GPIO_AF_OTG1_FS) ;
  GPIO_PinAFConfig(GPIOA,GPIO_PinSource11,GPIO_AF_OTG1_FS) ; 
  GPIO_PinAFConfig(GPIOA,GPIO_PinSource12,GPIO_AF_OTG1_FS) ;
  
@@ -71,14 +71,14 @@ void USB_OTG_BSP_Init(USB_OTG_CORE_HANDLE *pdev)
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
  GPIO_Init(GPIOA, &GPIO_InitStructure);    
  
-  /* Configure ID pin */
+/*  // Configure ID pin 
  GPIO_InitStructure.GPIO_Pin =  GPIO_Pin_10;
  GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP ;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
  GPIO_Init(GPIOA, &GPIO_InitStructure);  
  GPIO_PinAFConfig(GPIOA,GPIO_PinSource10,GPIO_AF_OTG1_FS) ;   
-
+*/
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
  RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_OTG_FS, ENABLE) ; 
 }
@@ -28,6 +28,7 @@
 /* Includes ------------------------------------------------------------------*/
 #include "../opentx.h"
 #include "../FatFs/diskio.h"
+#include "board_taranis.h"

 extern "C" {
 #include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/STM32F2xx_StdPeriph_Driver/inc/misc.h"
@@ -404,7 +405,7 @@ const FATDirEntry_t g_DIRroot[16] =
    {
        { 'T', 'A', 'R', 'A', 'N', 'I', 'S', ' '},
        { 'B', 'I', 'N'},
-        0x26,		// Archive, hidden, system
+        0x24,		// Archive, hidden, system
        0x00,
        0x3E,
        0xA301,
@@ -652,22 +653,27 @@ int32_t fat12Read( uint8_t *buffer, uint16_t sector, uint16_t count )
      eeprom_read_block (buffer, (sector-3)*512, 512);
    }
    buffer += 512 ;
-    sector += 1 ;
-    count -= 1 ;
+    sector++ ;
+    count-- ;
  }
  return 0 ;
 }
 //------------------------------------------------------------------------------

 //------------------------------------------------------------------------------
-int32_t fat12Write( const uint8_t *buffer, uint16_t sector, uint32_t count )
+int32_t fat12Write(const uint8_t *buffer, uint16_t sector, uint32_t count )
 {
  // TO DO, actually write to the EEPROM
-  if ( sector > 2 )
+  if ( sector >3 )
  {
-    sector -= 2 ;		// Indexes EEPROM in 512 byte blocks
+    sector -= 4 ;		// Indexes EEPROM in 512 byte blocks
    // Look for a 4K block boundary, writing 4K+
-    
+    while (count) {
+      eeWriteBlockCmp((uint8_t *)buffer, sector*512, 512);
+      buffer+=512;
+      sector++;
+      count--;
+    }  
  }
  return 0 ;
 }
@@ -474,8 +474,7 @@ ISR(USART0_RX_vect)
  uint8_t data;
  
  UCSR0B &= ~(1 << RXCIE0); // disable Interrupt
-  sei() ;
-
+  sei();

  stat = UCSR0A; // USART control and Status Register 0 A

@@ -140,9 +140,9 @@ const pm_char STR_AILDIRECTION[] PROGMEM = TR_AILDIRECTION;
 const pm_char STR_COLDIRECTION[] PROGMEM = TR_COLDIRECTION;
 #endif
 const pm_char STR_MODE[] PROGMEM = TR_MODE;
-#if defined(AUDIO) && defined(BEEPER)
+#if defined(AUDIO) && defined(BUZZER)
 const pm_char STR_SPEAKER[] PROGMEM = INDENT"Speaker";
-const pm_char STR_BEEPER[] PROGMEM = INDENT"Beeper";
+const pm_char STR_BUZZER[] PROGMEM = INDENT"Buzzer";
 #endif
 const pm_char STR_NOFREEEXPO[] PROGMEM = TR_NOFREEEXPO;
 const pm_char STR_NOFREEMIXER[] PROGMEM = TR_NOFREEMIXER;
@@ -157,7 +157,7 @@ const pm_char STR_OFFSET[] PROGMEM = TR_OFFSET;
 const pm_char STR_TRIM[] PROGMEM = TR_TRIM;
 const pm_char STR_DREX[] PROGMEM = TR_DREX;
 const pm_char STR_CURVE[] PROGMEM = TR_CURVE;
-const pm_char STR_FPHASE[] PROGMEM = TR_FPHASE;
+const pm_char STR_FLMODE[] PROGMEM = TR_FLMODE;
 const pm_char STR_MIXWARNING[] PROGMEM = TR_MIXWARNING;
 const pm_char STR_OFF[] PROGMEM = TR_OFF;
 const pm_char STR_MULTPX[] PROGMEM = TR_MULTPX;
@@ -297,6 +297,7 @@ const pm_char STR_MENUTEMPLATES[] PROGMEM = TR_MENUTEMPLATES;

 const pm_char STR_MENUSTAT[] PROGMEM = TR_MENUSTAT;
 const pm_char STR_MENUDEBUG[] PROGMEM = TR_MENUDEBUG;
+const pm_char STR_MENUGLOBALVARS[] PROGMEM = "GLOBAL VARIABLES";

 #if defined(DSM2) || defined(PXX)
 const pm_char STR_RXNUM[] PROGMEM = TR_RXNUM;
@@ -313,6 +314,8 @@ const pm_char STR_FAILSAFESET[] PROGMEM = TR_FAILSAFESET;
 #endif

 const pm_char STR_INVERT_THR[] PROGMEM = TR_INVERT_THR;
+const pm_char STR_AND_SWITCH[] PROGMEM = "AND Switch";
+extern const pm_char STR_CF[] PROGMEM = "CF";

 #if defined(FRSKY_HUB)
 const pm_char STR_MINRSSI[] PROGMEM = TR_MINRSSI;
@@ -356,6 +359,8 @@ const pm_char STR_RESET_TELEMETRY[] PROGMEM = "Reset Telemetry";
 const pm_char STR_STATISTICS[] PROGMEM = "Statistics";
 #endif

+const pm_char STR_RESET[] PROGMEM = "[Reset]";
+
 #if defined(SDCARD)
 const pm_char STR_BACKUP_MODEL[] PROGMEM = TR_BACKUP_MODEL;
 const pm_char STR_RESTORE_MODEL[] PROGMEM = TR_RESTORE_MODEL;
@@ -437,6 +442,7 @@ const pm_char STR_BYTES[] PROGMEM = "bytes";
 const pm_char STR_MODULE_BIND[] PROGMEM  = "[Bind]";
 const pm_char STR_MODULE_RANGE[] PROGMEM = "[Range]";
 const pm_char STR_SET[] PROGMEM = "[Set]";
+const pm_char STR_TRAINER[] PROGMEM = "Trainer";
 #endif

 const pm_uchar font_5x7[] PROGMEM = {
@@ -271,12 +271,12 @@ extern const pm_char STR_ELEDIRECTION[];
 extern const pm_char STR_AILDIRECTION[];
 extern const pm_char STR_COLDIRECTION[];
 extern const pm_char STR_MODE[];
-#if defined(AUDIO) && defined(BEEPER)
+#if defined(AUDIO) && defined(BUZZER)
 extern const pm_char STR_SPEAKER[];
-extern const pm_char STR_BEEPER[];
+extern const pm_char STR_BUZZER[];
 #else
 #define STR_SPEAKER STR_MODE
-#define STR_BEEPER  STR_MODE
+#define STR_BUZZER  STR_MODE
 #endif
 extern const pm_char STR_NOFREEEXPO[];
 extern const pm_char STR_NOFREEMIXER[];
@@ -291,7 +291,7 @@ extern const pm_char STR_OFFSET[];
 extern const pm_char STR_TRIM[];
 extern const pm_char STR_DREX[];
 extern const pm_char STR_CURVE[];
-extern const pm_char STR_FPHASE[];
+extern const pm_char STR_FLMODE[];
 extern const pm_char STR_MIXWARNING[];
 extern const pm_char STR_OFF[];
 extern const pm_char STR_MULTPX[];
@@ -407,7 +407,10 @@ extern const pm_char STR_MENUTELEMETRY[];
 extern const pm_char STR_MENUTEMPLATES[];
 extern const pm_char STR_MENUSTAT[];
 extern const pm_char STR_MENUDEBUG[];
+extern const pm_char STR_MENUGLOBALVARS[];
 extern const pm_char STR_INVERT_THR[];
+extern const pm_char STR_AND_SWITCH[];
+extern const pm_char STR_CF[];

 #if defined(DSM2) || defined(PXX)
 extern const pm_char STR_RXNUM[];
@@ -472,6 +475,8 @@ extern const pm_char STR_CURRENT[];
  extern const pm_char STR_STATISTICS[];
 #endif

+extern const pm_char STR_RESET[];
+
 #if defined(SDCARD)
  extern const pm_char STR_BACKUP_MODEL[];
  extern const pm_char STR_RESTORE_MODEL[];
@@ -575,6 +580,7 @@ extern const pm_char STR_CHANNELS_MONITOR[];
  extern const pm_char STR_MODULE_BIND[];
  extern const pm_char STR_MODULE_RANGE[];
  extern const pm_char STR_SET[];
+  extern const pm_char STR_TRAINER[];
 #endif

 // TODO move to translations files
@@ -381,7 +381,7 @@
 #define TR_TRIM                "Trim"
 #define TR_DREX                "DVex"
 #define TR_CURVE               "K\206ivka"
-#define TR_FPHASE              "F\200ze"
+#define TR_FLMODE              "F\200ze"
 #define TR_MIXWARNING          "Varov\200n\204"
 #define TR_OFF                 "VYP"
 #define TR_MULTPX              "Mat.Operace"
@@ -272,7 +272,7 @@
 #define LEN_VSWITCHES          "\003"
 #define LEN_VSRCRAW            "\004"

-#if defined(PCBX9D)
+#if defined(PCBTARANIS)
  #define TR_POTS_VSRCRAW      "S1\0 ""S2\0 ""LS\0 ""RS\0 "  //4 Potis S1,S2,Links,Rechts  
  #define TR_SW_VSRCRAW        "SA\0 ""SB\0 ""SC\0 ""SD\0 ""SE\0 ""SF\0 ""SG\0 ""SH\0 "
 #elif defined(EXTRA_3POS)
@@ -286,7 +286,7 @@
 #endif

 #if defined(CPUARM)
-  #define TR_CUSTOMSW        "PS1""PS2""PS3""PS4""PS5""PS6""PS7""PS8""PS9""PSA""PSB""PSC""PSD""PSE""PSF""PSG""PSH""PSI""PSJ""PSK""PSL""PSM""PSN""PSO""PSP""PSQ""PSR""PSS""PST""PSU""PSV""PSW"
+  #define TR_CUSTOMSW          "PS1""PS2""PS3""PS4""PS5""PS6""PS7""PS8""PS9""PSA""PSB""PSC""PSD""PSE""PSF""PSG""PSH""PSI""PSJ""PSK""PSL""PSM""PSN""PSO""PSP""PSQ""PSR""PSS""PST""PSU""PSV""PSW"
 #elif defined(PCBGRUVIN9X) || defined(CPUM128)
  #define TR_CUSTOMSW          "PS1""PS2""PS3""PS4""PS5""PS6""PS7""PS8""PS9""PSA""PSB""PSC""PSD""PSE""PSF"
 #else
@@ -325,7 +325,7 @@
 #define LEN_INDENT             1
 #define INDENT_WIDTH           (FW/2)

-#if defined(PCBX9D)
+#if defined(PCBTARANIS)
  #define TR_ENTER             "[ENTER]"
 #else
  #define TR_ENTER             "[MENU]"
@@ -383,7 +383,7 @@
 #define TR_TRIM                "Trim"
 #define TR_DREX                "DRex"
 #define TR_CURVE               "Kurve"
-#define TR_FPHASE              TR("Phase","Phasen")
+#define TR_FLMODE              TR("Phase","Phasen")
 #define TR_MIXWARNING          "Warnung"
 #define TR_OFF                 "AUS"
 #define TR_MULTPX              "Wirkung"
@@ -127,7 +127,7 @@
 #define TR_VCURVEFUNC          "---""x>0""x<0""|x|""f>0""f<0""|f|"

 #define LEN_VMLTPX             "\010"
-#define TR_VMLTPX              "Add     ""Multiply""Replace "
+#define TR_VMLTPX              "Add\0    ""Multiply""Replace\0"

 #define LEN_VMLTPX2            "\002"
 #define TR_VMLTPX2             "+=""*="":="
@@ -273,7 +273,7 @@
 #define TR_VTEMPLATES          "Clear Mixes\0\0""Simple 4-CH \0""Sticky-T-Cut\0""V-Tail      \0""Elevon\\Delta\0""eCCPM       \0""Heli Setup  \0""Servo Test  \0"

 #define LEN_VSWASHTYPE         "\004"
-#define TR_VSWASHTYPE          "--- ""120 ""120X""140 ""90\0"
+#define TR_VSWASHTYPE          "---\0""120\0""120X""140\0""90\0"

 #define LEN_VKEYS              "\005"
 #define TR_VKEYS               TR(" Menu"" Exit"" Down""   Up""Right"" Left", " Menu"" Exit""Enter"" Page"" Plus""Minus")
@@ -354,7 +354,7 @@
 #define TR_LOADINGMODEL        "Loading model..."
 #define TR_NAME                "Name"
 #define TR_MODELNAME           "Model Name"
-#define TR_PHASENAME           "Phase Name"
+#define TR_PHASENAME           "Mode Name"
 #define TR_MIXNAME             "Mix Name"
 #define TR_EXPONAME            "Expo Name"
 #define TR_BITMAP              "Model Image"
@@ -365,8 +365,8 @@
 #define TR_TTRACE              TR("T-Source","Throttle Source")
 #define TR_TTRIM               TR("T-Trim","Throttle Trim")
 #define TR_BEEPCTR             TR("Ctr Beep","Center Beep")
-#define TR_PROTO               TR(INDENT"Proto",INDENT"Protocol")
-#define TR_PPMFRAME            "PPM frame"
+#define TR_PROTO               TR(INDENT "Proto", INDENT "Protocol")
+#define TR_PPMFRAME            TR("PPM frame", INDENT "PPM frame")
 #define TR_MS                  "ms"
 #define TR_SWITCH              "Switch"
 #define TR_TRIMS               "Trims"
@@ -395,7 +395,7 @@
 #define TR_TRIM                "Trim"
 #define TR_DREX                "DRex"
 #define TR_CURVE               "Curve"
-#define TR_FPHASE              TR("Phase","Phases")
+#define TR_FLMODE              TR("Mode","Modes")
 #define TR_MIXWARNING          "Warning"
 #define TR_OFF                 "OFF"
 #define TR_MULTPX              "Multpx"
@@ -420,14 +420,14 @@
 #define TR_HAPTICSTRENGTH      INDENT"Strength"
 #define TR_CONTRAST            "Contrast"
 #define TR_ALARMS_LABEL        "Alarms"
-#define TR_BATTERY_RANGE       "Battery Range"
+#define TR_BATTERY_RANGE       TR("Battery range","Battery meter range")
 #define TR_BATTERYWARNING      INDENT"Battery Low"
 #define TR_INACTIVITYALARM     INDENT"Inactivity"
 #define TR_MEMORYWARNING       INDENT"Memory Low"
 #define TR_ALARMWARNING        INDENT"Sound Off"
 #define TR_RENAVIG             "RotEnc Navig"
-#define TR_THROTTLEREVERSE     TR("Thr reverse","Throttle reverse")
-#define TR_MINUTEBEEP          TR(INDENT"Minute",INDENT"Every minute")
+#define TR_THROTTLEREVERSE     TR("T-Reverse", "Throttle reverse")
+#define TR_MINUTEBEEP          TR(INDENT"Minute",INDENT"Minute call")
 #define TR_BEEPCOUNTDOWN       INDENT"Countdown"
 #define TR_PERSISTENT          TR(INDENT"Persist.",INDENT"Persistent")
 #define TR_BACKLIGHT_LABEL     "Backlight"
@@ -473,7 +473,7 @@
 #define TR_PPM                 "PPM"
 #define TR_CH                  "CH"
 #define TR_MODEL               "MODEL"
-#define TR_FP                  "FP"
+#define TR_FP                  "FM"
 #define TR_MIX                 "MIX"
 #define TR_EEPROMLOWMEM        "EEPROM low mem"
 #define TR_ALERT               "\016ALERT"
@@ -494,13 +494,13 @@
 #define TR_TRIMS2OFFSETS       "\006Trims => Offsets"
 #define TR_MENUMODELSEL        TR("MODELSEL","MODEL SELECTION")
 #define TR_MENUSETUP           TR("SETUP","MODEL SETUP")
-#define TR_MENUFLIGHTPHASE     "FLIGHT PHASE"
-#define TR_MENUFLIGHTPHASES    "FLIGHT PHASES"
+#define TR_MENUFLIGHTPHASE     "FLIGHT MODE"
+#define TR_MENUFLIGHTPHASES    "FLIGHT MODES"
 #define TR_MENUHELISETUP       "HELI SETUP"

 #if defined(PPM_CENTER_ADJUSTABLE) || defined(PPM_LIMITS_SYMETRICAL) // The right menu titles for the gurus ...
  #define TR_MENUDREXPO        "STICKS"
-  #define TR_MENULIMITS        "OUTPUTS"
+  #define TR_MENULIMITS        "SERVOS"
 #else
  #define TR_MENUDREXPO        "DR/EXPO"
  #define TR_MENULIMITS        "LIMITS"
@@ -590,6 +590,6 @@
 #define TR_CHANNELS_MONITOR    "CHANNEL MONITOR"
 #define TR_INTERNALRF          "Internal RF"
 #define TR_EXTERNALRF          "External RF"
-#define TR_FAILSAFE            "Failsafe mode"
+#define TR_FAILSAFE            INDENT "Failsafe mode"
 #define TR_FAILSAFESET         "FAILSAFE SETTINGS"
 #define TR_COUNTRYCODE         "Country Code"
@@ -381,7 +381,7 @@
 #define TR_TRIM                "Trim"
 #define TR_DREX                "DRex"
 #define TR_CURVE               "Curva"
-#define TR_FPHASE              "Fase"
+#define TR_FLMODE              "Fase"
 #define TR_MIXWARNING          "Aviso"
 #define TR_OFF                 "OFF"
 #define TR_MULTPX              "Multpx"
@@ -395,7 +395,7 @@
 #define TR_TRIM                "Trim"
 #define TR_DREX                "DRex"
 #define TR_CURVE               "Courbe"
-#define TR_FPHASE              TR("Phase","Phases")
+#define TR_FLMODE              TR("Phase","Phases")
 #define TR_MIXWARNING          "Alerte"
 #define TR_OFF                 "OFF"
 #define TR_MULTPX              "Op\200ration"
@@ -380,7 +380,7 @@
 #define TR_TRIM                "Trim"
 #define TR_DREX                "DRex"
 #define TR_CURVE               "Curva"
-#define TR_FPHASE              "Fase"
+#define TR_FLMODE              "Fase"
 #define TR_MIXWARNING          "Avviso"
 #define TR_OFF                 "OFF"
 #define TR_MULTPX              "MultPx"
@@ -359,7 +359,7 @@
 #define TR_TRIM                "Trim"
 #define TR_DREX                "DRex"
 #define TR_CURVE               "Curvas"
-#define TR_FPHASE              "Fase"
+#define TR_FLMODE              "Fase"
 #define TR_MIXWARNING          "Aviso"
 #define TR_OFF                 "OFF"
 #define TR_MULTPX              "Aplicar"
@@ -354,7 +354,7 @@
 #define TR_LOADINGMODEL        "Laddar Modell   "
 #define TR_NAME                "Namn"
 #define TR_MODELNAME           "Modellnamn"
-#define TR_PHASENAME           "Fasnamn   "
+#define TR_PHASENAME           "Modnamn   "
 #define TR_MIXNAME             "Mixnamn "
 #define TR_EXPONAME            "Exponamn "
 #define TR_BITMAP              "Modell-bild"
@@ -395,7 +395,7 @@
 #define TR_TRIM                "Trim"
 #define TR_DREX                "DRex"
 #define TR_CURVE               "Kurva"
-#define TR_FPHASE              TR("Fas","Faser")
+#define TR_FLMODE              TR("Mod","Moder")
 #define TR_MIXWARNING          "Varning"
 #define TR_OFF                 "AV "
 #define TR_MULTPX              "Multpx"
@@ -429,7 +429,7 @@
 #define TR_THROTTLEREVERSE     "Reverserad Gas"
 #define TR_MINUTEBEEP          INDENT"Varje Minut"
 #define TR_BEEPCOUNTDOWN       INDENT"R\201kna Ned"
-#define TR_PERSISTENT          TR("J\201mt p\200 ","INDENT"Alltid P\200")
+#define TR_PERSISTENT          TR("J\201mt p\200 ",INDENT"Alltid P\200")
 #define TR_BACKLIGHT_LABEL     "Belysning"
 #define TR_BLDELAY             INDENT"Av efter"
 #define TR_BLONBRIGHTNESS      INDENT"P\200 Ljusstyrka"
@@ -494,8 +494,8 @@
 #define TR_TRIMS2OFFSETS       "\004[Spara Trimv\201rden]"
 #define TR_MENUMODELSEL        TR("Modell","V\201lj Modell")
 #define TR_MENUSETUP           TR("V\201rden","Modellinst\201llningar")
-#define TR_MENUFLIGHTPHASE     "Flygfas"
-#define TR_MENUFLIGHTPHASES    "Flygfaser"
+#define TR_MENUFLIGHTPHASE     "Flygmod"
+#define TR_MENUFLIGHTPHASES    "Flygmoder"
 #define TR_MENUHELISETUP       "Helikopter"

 #if defined(PPM_CENTER_ADJUSTABLE) || defined(PPM_LIMITS_SYMETRICAL) // The right menu titles for the gurus ...
@@ -116,7 +116,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
    number = -number;
  }

-  convertUnit(number, unit);
+  if (unit) {
+   unit--;
+   convertUnit(number, unit);
+   if (IS_IMPERIAL_ENABLE()) {
+     if (unit == UNIT_METERS) {
+       unit = UNIT_FEET;
+     }
+   }
+   unit++;
+  }

  int8_t mode = MODE(att);
  if (mode > 0) {
@@ -106,7 +106,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
    number = -number;
  }

-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }

  int8_t mode = MODE(att);
  if (mode > 0) {
@@ -130,7 +130,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
    number = -number;
  }

-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }

  int8_t mode = MODE(att);
  if (mode > 0) {
@@ -112,7 +112,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
    number = -number;
  }

-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }

  int8_t mode = MODE(att);
  if (mode > 0) {
@@ -102,7 +102,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
    number = -number;
  }

-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }

  int8_t mode = MODE(att);
  if (mode > 0) {
@@ -115,7 +115,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
    number = -number;
  }

-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }

  int8_t mode = MODE(att);
  if (mode > 0) {
@@ -131,7 +131,16 @@ PLAY_FUNCTION(playNumber, getvalue_t number, uint8_t unit, uint8_t att)
    number = -number;
  }

-  convertUnit(number, unit);
+  if (unit) {
+    unit--;
+    convertUnit(number, unit);
+    if (IS_IMPERIAL_ENABLE()) {
+      if (unit == UNIT_METERS) {
+        unit = UNIT_FEET;
+      }
+    }
+    unit++;
+  }

  int8_t mode = MODE(att);
  if (mode > 0) {
@@ -137,11 +137,11 @@ void doMainScreenGraphics()
  DO_CROSS(RBOX_CENTERX, RBOX_CENTERY, 3)

  int16_t calibStickVert = calibratedStick[CONVERT_MODE(1+1)-1];
-  if (g_eeGeneral.throttleReversed && CONVERT_MODE(1+1)-1 == THR_STICK)
+  if (g_model.throttleReversed && CONVERT_MODE(1+1)-1 == THR_STICK)
    calibStickVert = -calibStickVert;
  lcd_square(LBOX_CENTERX+(calibratedStick[CONVERT_MODE(0+1)-1]*BOX_LIMIT/(2*RESX))-MARKER_WIDTH/2, LBOX_CENTERY-(calibStickVert*BOX_LIMIT/(2*RESX))-MARKER_WIDTH/2, MARKER_WIDTH, ROUND);
  calibStickVert = calibratedStick[CONVERT_MODE(2+1)-1];
-  if (g_eeGeneral.throttleReversed && CONVERT_MODE(2+1)-1 == THR_STICK)
+  if (g_model.throttleReversed && CONVERT_MODE(2+1)-1 == THR_STICK)
    calibStickVert = -calibStickVert;
  lcd_square(RBOX_CENTERX+(calibratedStick[CONVERT_MODE(3+1)-1]*BOX_LIMIT/(2*RESX))-MARKER_WIDTH/2, RBOX_CENTERY-(calibStickVert*BOX_LIMIT/(2*RESX))-MARKER_WIDTH/2, MARKER_WIDTH, ROUND);

@@ -263,11 +263,11 @@ void displayTopBar()
    x -= 12;
  }

-  if (SLAVE_MODE()) {
+  if (TRAINER_CONNECTED() && SLAVE_MODE()) {
    LCD_NOTIF_ICON(x, ICON_TRAINEE);
    x -= 12;
  }
-  else if (0) {
+  else if (TRAINER_CONNECTED() && !SLAVE_MODE()) {
    LCD_NOTIF_ICON(x, ICON_TRAINER);
    x -= 12;
  }
@@ -765,7 +765,7 @@ void menuMainView(uint8_t event)
      }
 #endif // PCBGRUVIN9X && ROTARY_ENCODERS

-      // Curstom Switches
+      // Custom Switches
 #if defined(PCBSKY9X)
      for (uint8_t i=0; i<NUM_CSW; i++) {
        int8_t len = getSwitch(SWSRC_SW1+i, 0) ? BAR_HEIGHT : 1;
@@ -779,7 +779,7 @@ void menuMainView(uint8_t event)
 #elif defined(PCBGRUVIN9X)
      for (uint8_t i=0; i<NUM_CSW; i++)
        putsSwitches(2*FW-2 + (i/3)*(4*FW-2) + (i/3>1 ? 3*FW : 0), 4*FH+1 + (i%3)*FH, SWSRC_SW1+i, getSwitch(SWSRC_SW1+i, 0) ? INVERS : 0);
-#elif !defined(CPUM64)
+#elif !defined(PCBSTD)
      for (uint8_t i=0; i<NUM_CSW; i++)
        putsSwitches(2*FW-2 + (i/3)*(4*FW-1), 4*FH+1 + (i%3)*FH, SWSRC_SW1+i, getSwitch(SWSRC_SW1+i, 0) ? INVERS : 0);
 #else
@@ -814,7 +814,7 @@ void menuMainView(uint8_t event)
    s_gvar_timer--;
    s_warning = PSTR("Global Variable");
    displayBox();
-#if defined(CPUM64)
+#if defined(PCBSTD)
    lcd_putsAtt(16+4*FW, 5*FH, PSTR("[\010]"), BOLD);
    lcd_outdezAtt(16+4*FW+4*FW+FW/2, 5*FH, GVAR_VALUE(s_gvar_last, s_perout_flight_phase), BOLD);
 #else
@@ -26,6 +26,8 @@

 import os, sys, shutil, platform, subprocess, wave, zipfile

+NO_ALTERNATE = 1024
+
 def generate(str, idx, alternate=0):
    result = None
    if "speak" in sys.argv:
@@ -41,7 +43,7 @@ def generate(str, idx, alternate=0):
        elif board == 'sky9x':
            result = idx + ".wav"
        else:
-            if alternate == 0:
+            if alternate >= NO_ALTERNATE:
                return []
            result = "%04d.wav" % alternate
            
@@ -197,19 +199,19 @@ if __name__ == "__main__":
                               "point four", "point five", "point six",
                               "point seven", "point eight", "point nine"]):
            systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+160+i))
-        for s, f, a in [(u"trim center", "midtrim", 244),
-                        (u"maximum trim reached", "endtrim", 0),
-                        (u"transmitter battery low", "lowbatt", 231),
-                        (u"inactivity alarm", "inactiv", 230),
-                        (u"throttle warning", "thralert", 232),
-                        (u"switch warning", "swalert", 233),
-                        (u"Welcome to open nine ex!", "tada", 245),
-                        (u"tick. tock", "timerlt3", 250),
-                        (u"ten. seconds", "timer10", 251),
-                        (u"twenty. seconds", "timer20", 252),
-                        (u"thirty. seconds", "timer30", 253),
+        for s, f, a in [(u"trim center", "midtrim", 494),
+                        (u"maximum trim reached", "endtrim", NO_ALTERNATE),
+                        (u"transmitter battery low", "lowbatt", 481),
+                        (u"inactivity alarm", "inactiv", 480),
+                        (u"throttle warning", "thralert", 482),
+                        (u"switch warning", "swalert", 483),
+                        (u"Welcome to open nine ex!", "tada", 495),
+                        (u"tick. tock", "timerlt3", 500),
+                        (u"ten. seconds", "timer10", 501),
+                        (u"twenty. seconds", "timer20", 502),
+                        (u"thirty. seconds", "timer30", 503),
                       ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
        for i, (s, f) in enumerate([
                     (u"gear!, up!", "gearup"),
                     (u"gear!, down!", "geardn"),
@@ -307,23 +309,23 @@ if __name__ == "__main__":
            systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+103+i))
        for i, s in enumerate(["volt", "amper", "meetri per secondo", "", "chilomeetri ora", "meetri", "gradi", "percento", "milliamper", "milliamper ora", "watt", "db", "piedi", "nodi", "ore", "minuti", "secondi", "R P M", "g"]):
            systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+113+i))            
-        for s, f, a in [(u"radio inattiva controllare", "inactiv", 230),
-                        (u"batteria della radio scarica", "lowbatt", 231),
-                        (u"controllo motore non in posizione, verificare", "thralert", 232),
-                        (u"interruttori non in posizione, verificare", "swalert", 233),
-                        (u"eeprom corrotta", "eebad", 0),
-                        (u"formattazone eeprom in corso", "eeformat", 0),
-                        (u"errore", "error", 0),
-                        (u"trim centrato", "midtrim", 244),
-                        (u"tada", "tada", 245),
-                        (u"potenziometro centrato", "midpot", 246),
-                        (u"massimo trim raggiunto", "endtrim", 0),
-                        (u"3 secondi al termine", "timerlt3", 250),
-                        (u"dieci secondi", "timer10", 251),
-                        (u"venti secondi", "timer20", 252),
-                        (u"trenta secondi", "timer30", 253),
+        for s, f, a in [(u"radio inattiva controllare", "inactiv", 480),
+                        (u"batteria della radio scarica", "lowbatt", 481),
+                        (u"controllo motore non in posizione, verificare", "thralert", 482),
+                        (u"interruttori non in posizione, verificare", "swalert", 483),
+                        (u"eeprom corrotta", "eebad", NO_ALTERNATE),
+                        (u"formattazone eeprom in corso", "eeformat", NO_ALTERNATE),
+                        (u"errore", "error", NO_ALTERNATE),
+                        (u"trim centrato", "midtrim", 494),
+                        (u"tada", "tada", 495),
+                        (u"potenziometro centrato", "midpot", 496),
+                        (u"massimo trim raggiunto", "endtrim", NO_ALTERNATE),
+                        (u"3 secondi al termine", "timerlt3", 500),
+                        (u"dieci secondi", "timer10", 501),
+                        (u"venti secondi", "timer20", 502),
+                        (u"trenta secondi", "timer30", 503),
                     ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
        for i, s in enumerate(["timer", "timer",  "trasmissione", "ricezione", "A1", "A2", "altitudine", "motore",
                               "carburante", "temperatura", "temperatura", "velocita'", "distanza", "altitudine", "cella lipo",
                               "totale lipo", "tensione", "corrente", "consumo", "potenza", "accelerazione X", "accellerazione Y", "accelerazione Z",
@@ -370,29 +372,29 @@ if __name__ == "__main__":
            voice = "german"

        for i in range(101):
-            systemSounds.extend(generate(str(i), i))
+            systemSounds.extend(generate(str(i), PROMPT_SYSTEM_BASE+i))
        systemSounds.extend(generate("tausend", PROMPT_SYSTEM_BASE+101))
        for i, s in enumerate(["comma", "und", "minus", "uhr", "minute", "minuten", "sekunde", "sekunden"]):
            systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+102+i))
        for i, s in enumerate(["Volt", "Ampere", "Meter pro sekunde", "", "kilometer pro stunde", "Meter", "Grad", "Prozent", "Milliampere", "Milliampere pro stunde", "Watt", "db", "Fuesse", "Knoten", "Uhr", "Minuten", "Secunden", "R P M", "g"]):
            systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+110+i))            
-        for s, f, a in [(u"Sender ist inaktiv,bitte Ueberpruefen Sie", "inactiv", 230),
-                        (u"Senderakku niedrig", "lowbatt", 231),
-                        (u"Gaskanal nicht Null, bitte pruefen", "thralert", 232),
-                        (u"Schalten fehlpositioniert, bitte pruefen", "swalert", 233),
-                        (u"Das EEPROM ist fehlerhaft", "eebad", 0),
-                        (u"Das EEPROM ist immer formatiert", "eeformat", 0),
-                        (u"fehler", "error", 0),
-                        (u"Trim zentriert", "midtrim", 244),
-                        (u"tada", "tada", 245),
-                        (u"Poti zentriert", "midpot", 246),
-                        (u"Maximale trimmung erreicht", "endtrim", 0),
-                        (u"Noch drei sekunden", "timerlt3", 250),
-                        (u"10 sekunden", "timer10", 251),
-                        (u"20 sekunden", "timer20", 252),
-                        (u"30 sekunden", "timer30", 253),
+        for s, f, a in [(u"Sender ist inaktiv,bitte Ueberpruefen Sie", "inactiv", 480),
+                        (u"Senderakku niedrig", "lowbatt", 481),
+                        (u"Gaskanal nicht Null, bitte pruefen", "thralert", 482),
+                        (u"Schalten fehlpositioniert, bitte pruefen", "swalert", 483),
+                        (u"Das EEPROM ist fehlerhaft", "eebad", NO_ALTERNATE),
+                        (u"Das EEPROM ist immer formatiert", "eeformat", NO_ALTERNATE),
+                        (u"fehler", "error", NO_ALTERNATE),
+                        (u"Trim zentriert", "midtrim", 494),
+                        (u"tada", "tada", 495),
+                        (u"Poti zentriert", "midpot", 496),
+                        (u"Maximale trimmung erreicht", "endtrim", NO_ALTERNATE),
+                        (u"Noch drei sekunden", "timerlt3", 500),
+                        (u"10 sekunden", "timer10", 501),
+                        (u"20 sekunden", "timer20", 502),
+                        (u"30 sekunden", "timer30", 503),
                     ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
        for i, s in enumerate(["Timer", "Timer",  "Sendung", "Empfang", "A1", "A2", "Hoehe", "Motor",
                               "Treibstoff", "Temperatur", "Temperatur", "Geschwindigkeit", "Ferne", "Hoehe", "Lipo-Zelle",
                               "Zellen gesamt", "Spannung", "Strom", "Verbrauch", "Power", "Beschleunigung X", "Beschleunigung Y", "Beschleunigung Z",
@@ -454,23 +456,23 @@ if __name__ == "__main__":
            systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+111+i))
        for i, s in enumerate([u"Volt", u"ampére", u"metros por segundo", u"", u"quilômetros por hora", u"metros", u"graus", u"cento", u"miliamperes", u"miliamperes por hora", u"watt", u"db", u"pés", u"nós", u"horas", u"minutos", u"segundos", u"RPM", u"g"]):
            systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+122+i))            
-        for s, f, a in [(u"atenção, o rádio foi esquecido ligado, por favor desligue-o", "inactiv", 230),
-                        (u"bateria do rádio fraca", "lowbatt", 231),
-                        (u"atenção,acelerador não está no mínimo", "thralert", 232),
-                        (u"atenção, certifique-se que os interruptores estão na posição certa", "swalert", 233),
-                        (u"eeprom corrompida", "eebad", 0),
-                        (u"formatação da eeprom em curso", "eeformat", 0),
-                        (u"erro", "error", 0),
-                        (u"trim centrado", "midtrim", 244),
-                        (u"tada", "tada", 245),
-                        (u"potenciómetro centrado", "midpot", 246),
-                        (u"trim no máximo", "endtrim", 0),
-                        (u"3 segundos", "timerlt3", 250),
-                        (u"10 segundos", "timer10", 251),
-                        (u"20 segundos", "timer20", 252),
-                        (u"30 segundos", "timer30", 253),
+        for s, f, a in [(u"atenção, o rádio foi esquecido ligado, por favor desligue-o", "inactiv", 480),
+                        (u"bateria do rádio fraca", "lowbatt", 481),
+                        (u"atenção,acelerador não está no mínimo", "thralert", 482),
+                        (u"atenção, certifique-se que os interruptores estão na posição certa", "swalert", 483),
+                        (u"eeprom corrompida", "eebad", NO_ALTERNATE),
+                        (u"formatação da eeprom em curso", "eeformat", NO_ALTERNATE),
+                        (u"erro", "error", NO_ALTERNATE),
+                        (u"trim centrado", "midtrim", 494),
+                        (u"tada", "tada", 495),
+                        (u"potenciómetro centrado", "midpot", 496),
+                        (u"trim no máximo", "endtrim", NO_ALTERNATE),
+                        (u"3 segundos", "timerlt3", 500),
+                        (u"10 segundos", "timer10", 501),
+                        (u"20 segundos", "timer20", 502),
+                        (u"30 segundos", "timer30", 503),
                     ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
        for i, s in enumerate([u"cronómetro", u"cronómetro", u"transmissão", u"recepção", u"A1", u"A2", u"altitude", u"motor",
                                u"combustível", u"temperatura", u"temperatura", u"velocidade", u"distância", u"altitude", u"célula lipo"
                                u"Total lipo", u"tensão", u"corrente", u"consumo", u"potência", u"aceleração X", u"aceleração Y", u"aceleração Z"
@@ -547,19 +549,19 @@ if __name__ == "__main__":
        					   u"gé", u"gé", u"gé", u"gé"]):
            systemSounds.extend(generate(s, PROMPT_SYSTEM_BASE+118+i))
            
-        for s, f, a in [(u"střed trimu", "midtrim", 244),
-                        (u"maximum trimu", "endtrim", 0),
-                        (u"baterie rádia je vybitá", "lowbatt", 231),
-                        (u"zapoměl jsi na mě!", "inactiv", 230),
-                        (u"plyn není na nule", "thralert", 232),
-                        (u"přepínače nejsou ve výchozí poloze", "swalert", 233),
-                        (u"tadá", "tada", 245),
-                        (u"ťik ťak", "timerlt3", 250),
-                        (u"deset sekund", "timer10", 251),
-                        (u"dvacet sekund", "timer20", 252),
-                        (u"třicet sekund", "timer30", 253),
+        for s, f, a in [(u"střed trimu", "midtrim", 494),
+                        (u"maximum trimu", "endtrim", NO_ALTERNATE),
+                        (u"baterie rádia je vybitá", "lowbatt", 481),
+                        (u"zapoměl jsi na mě!", "inactiv", 480),
+                        (u"plyn není na nule", "thralert", 482),
+                        (u"přepínače nejsou ve výchozí poloze", "swalert", 483),
+                        (u"tadá", "tada", 495),
+                        (u"ťik ťak", "timerlt3", 500),
+                        (u"deset sekund", "timer10", 501),
+                        (u"dvacet sekund", "timer20", 502),
+                        (u"třicet sekund", "timer30", 503),
                       ]:
-            systemSounds.extend(generate(s, f, PROMPT_SYSTEM_BASE+a))
+            systemSounds.extend(generate(s, f, a))
        for i, (s, f) in enumerate([
                     (u"podvozek je zasunut", "gearup"),
                     (u"podvozek je vysunut", "geardn"),
@@ -599,13 +601,13 @@ if __name__ == "__main__":
        for f, s in systemSounds:
            l = u""
            if board == "sky9x":
-                l += u"9XSOUNDS/SYSTEM;"
+                l += u"SOUNDS/SYSTEM;"
            l += f + u";" + s + u"\n"
            csvFile.write(l.encode("latin-1"))
        for f, s in sounds:
            l = u""
            if board == "sky9x":
-                l += u"9XSOUNDS;"
+                l += u"SOUNDS;"
            l += f + u";" + s + u"\n"
            csvFile.write(l.encode("latin-1"))
        csvFile.close()
@@ -615,13 +617,13 @@ if __name__ == "__main__":
        zip = zipfile.ZipFile(zip_name, "w", zipfile.ZIP_DEFLATED)
        for f, s in systemSounds:
            if board == "sky9x":
-                zip.write(f, "9XSOUNDS/SYSTEM/" + f)
+                zip.write(f, "SOUNDS/SYSTEM/" + f)
            else:
                zip.write(f, f)
            os.remove(f)
        for f, s in sounds:
            if board == "sky9x":
-                zip.write(f, "9XSOUNDS/" + f)
+                zip.write(f, "SOUNDS/" + f)
            else:
                zip.write(f, f)
            os.remove(f)
Author	SHA1	Message	Date
romolo.manfredini@gmail.com	f4fc8482f0	release 2279	2013-04-16 07:01:07 +00:00
bsongis@gmail.com	0576edc6a6	[de language] Remaining PCBX9D ifdef in de translations	2013-04-15 19:46:35 +00:00
bsongis@gmail.com	36d300b248	[all] Problem with \|d\|>=ofs and Timer2 in custom switches (thanks thomas9x for all the infos)	2013-04-15 19:45:36 +00:00
bsongis@gmail.com	ae1be246b6	[all] d>=ofs and Timers were not working with EXT=STD	2013-04-15 13:48:58 +00:00
bsongis@gmail.com	9cb026ec58	[all] Layout problem in Custom Switches menu	2013-04-15 12:38:45 +00:00
bernet.andre@gmail.com	fd39a178bb	[M128] Variant missing in stamp	2013-04-15 10:37:23 +00:00
bsongis@gmail.com	a7655c30ff	[all] Min/Max values on T1/T2/ALT/RPM badly displayed	2013-04-15 09:15:48 +00:00
romolo.manfredini@gmail.com	471511c24c	fix sky9x compilation	2013-04-14 21:57:28 +00:00
michael.blandford@mypostoffice.co.uk	37cc13c140	Fix SKY compile errors	2013-04-14 21:24:39 +00:00
michael.blandford@mypostoffice.co.uk	5118eccf4d	Add stop_trainer_capture()	2013-04-14 19:07:39 +00:00
michael.blandford@mypostoffice.co.uk	aa9ae51e21	Taranis - PXX/PPM for two modules, trainer input/output changes	2013-04-14 14:44:29 +00:00
bsongis@gmail.com	452ac21f89	[Sky9x] BUZZER support in addition to AUDIO	2013-04-13 20:42:31 +00:00
bsongis@gmail.com	1ec8c74911	[Taranis] Backlight working on simu	2013-04-13 11:42:49 +00:00
bsongis@gmail.com	ebbfb7336e	[Taranis] Warning fixed, backlight working on simu	2013-04-13 11:19:58 +00:00
bernet.andre@gmail.com	464755e302	[Taranis] PA10 no more configured by USB driver, trainer jack doesn't keep power on anymore	2013-04-13 10:51:30 +00:00
bernet.andre@gmail.com	064c8d8a5c	[taranis] trainer detection and main view icons	2013-04-13 08:52:05 +00:00
bsongis@gmail.com	f14a874bf5	[Taranis] PXX pulses reworked	2013-04-12 21:03:19 +00:00
bsongis@gmail.com	de34cb7ef2	[Taranis] Cosmetics	2013-04-12 20:43:22 +00:00
bsongis@gmail.com	72a3098f26	[Taranis] Channels range masked when internal module OFF	2013-04-12 20:26:57 +00:00
bsongis@gmail.com	358a57945f	[Taranis] External module and Trainer support (menus only)	2013-04-12 18:57:52 +00:00
kjell.kernen@gmail.com	e9abf59ee4	Mirrored Bertrand's name change of flight phase to flight mode in Swedish (Mode = Mod).	2013-04-12 13:57:42 +00:00
bernet.andre@gmail.com	5ff4335b50	[Taranis] Trainer detect working (thanks Mike!) Trim reset via long press with audio confirmation Backlight flash shorter	2013-04-11 09:46:10 +00:00
bsongis@gmail.com	4d797f5e83	Simu code cleaning	2013-04-11 06:02:37 +00:00
bsongis@gmail.com	2a8fe6d110	[all] Inverted flash on beep when backlight is ON [Taranis] Menu in MODELSEL [all] Menus wrap around + keys repeat [Gruvin9x] Issue 16 fixed	2013-04-10 16:02:22 +00:00
bsongis@gmail.com	ea7acfa5a6	Bug in german TTS files	2013-04-10 05:31:59 +00:00
bsongis@gmail.com	2de5a8dcb6	[all] BEEPER renamed to BUZZER, PHASES renamed to MODES [Taranis] PPM Center Adjustable [stock] Issue 225 fixed [all] Throttle Inverted is now a Model parameter [Taranis] Issue 15 fixed (when >5 GVARS) [Gruvin9x] Issue 16 almost fixed	2013-04-09 20:17:50 +00:00
bsongis@gmail.com	e064edc69b	[stock128] A compromise for RAM!	2013-04-08 20:52:00 +00:00
bsongis@gmail.com	4d03134e9e	[stock128] Less RAM used!!!	2013-04-08 19:12:38 +00:00
bsongis@gmail.com	541c5aa000	[stock128] Less RAM used!!!	2013-04-08 17:34:33 +00:00
mhotar@gmail.com	ad82ce9c1b	tts files synced to EN version	2013-04-08 10:03:40 +00:00
bsongis@gmail.com	7c4bb27ebd	Remaining traces removed	2013-04-07 21:01:16 +00:00
bernet.andre@gmail.com	e484668033	[taranis] inverted pot	2013-04-07 19:40:13 +00:00
bsongis@gmail.com	5f9a24cddd	[gruvin9x] Issue 12 fixed	2013-04-07 19:31:38 +00:00
bsongis@gmail.com	5154ba238a	Cosmetics	2013-04-07 19:28:38 +00:00
romolo.manfredini@gmail.com	c4a8e121d3	taranis eeprom write	2013-04-07 09:29:21 +00:00
romolo.manfredini@gmail.com	6c068076e4	Buzzer fix	2013-04-06 20:57:46 +00:00
romolo.manfredini@gmail.com	8b5165c271	Beeper fix	2013-04-06 20:43:28 +00:00
bsongis@gmail.com	61f430cb43	[stock] Beeper was broken (BUZZER ifdef instead of BEEPER)	2013-04-06 20:42:24 +00:00
bernet.andre@gmail.com	144f47b6cf	"Flight Phase" was bad English Taranis simu now uses up/down keys	2013-04-06 20:32:56 +00:00
bsongis@gmail.com	a493e022a7	[stock] Beeper was broken (BUZZER ifdef instead of BEEPER)	2013-04-06 20:29:09 +00:00
bsongis@gmail.com	517c5521be	[stock, gruvin9x] TTS script wrong numbers for errors / alarms	2013-04-05 19:39:23 +00:00
bsongis@gmail.com	aedb5211ab	[all] Cosmetics in HELI menu (en)	2013-04-05 16:47:03 +00:00
bernet.andre@gmail.com	8833a3e451	A couple of string changes	2013-04-05 10:42:28 +00:00
bsongis@gmail.com	79c0754af9	Issue 13 fixed (HELI menu)	2013-04-05 09:23:58 +00:00
bsongis@gmail.com	49cb4f97d6	TTS script bug fixes	2013-04-05 08:26:23 +00:00
romolo.manfredini@gmail.com	a5bf114f2b	Fix string in SE translation	2013-04-05 06:28:09 +00:00
bsongis@gmail.com	022caee996	[Taranis] Timer display fixed	2013-04-05 05:44:08 +00:00