Commit Graph

480699 Commits

Author SHA1 Message Date
Lars-Peter Clausen 6391fffb7b ASoC: ab8500-codec: Drop bank prefix from AB8500_GPIO_DIR4_REG register define
The AB8500_GPIO_DIR4_REG register define has the bank for the register in the
upper 8 bits and the register itself in the lower 8 bits. When passing it to
abx500_{set,get}_register_interruptible() the upper bits get truncated which
generates the following warning from sparse:
	sound/soc/codecs/ab8500-codec.c:1972:53: warning: cast truncates bits
	 from constant value (1013 becomes 13)
	sound/soc/codecs/ab8500-codec.c:1980:53: warning: cast truncates bits
	 from constant value (1013 becomes 13)

The bank is passed separately to abx500_{set,get}_register_interruptible() so
the code works fine as it is. Given that all users of AB8500_GPIO_DIR4_REG
always truncate the upper 8 bits just remove them from the define.

Also remove the unnecessary casts to u8.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 09:35:58 -05:00
Lars-Peter Clausen e8a70c25b8 ASoC: samsung idma: Add proper annotation for casting iomem pointers
It is not always possible to interchange iomem pointers with normal pointers,
which why we have annotations for iomem pointers and warn when casting them to a
normal pointer or vice versa. In this case the casting is fine and unfortunately
necessary so add the proper annotations to tell code checkers that it is
intentional. This silences the following warnings from sparse:
	sound/soc/samsung/idma.c:354:20: warning: incorrect type in argument 1
	 (different address spaces) expected void volatile [noderef]
	  <asn:2>*addr got unsigned char *area
	sound/soc/samsung/idma.c:372:22: warning: cast removes address space of
	 expression

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 09:34:45 -05:00
Lars-Peter Clausen 6c7d1dfca9 ASoC: sh: Fix dma direction type
dmaengine_prep_slave_single() expects a enum dma_transfer_direction and not a
enum dma_data_direction. Since the integer representations of both DMA_TO_DEVICE
and DMA_MEM_TO_DEV aswell as DMA_FROM_DEVICE and DMA_DEV_TO_MEM have the same
value the code worked fine even though it was using the wrong type.

Fixes the following warnings from sparse:
	sound/soc/sh/fsi.c:1307:42: warning: mixing different enum types
	sound/soc/sh/fsi.c:1307:42:     int enum dma_data_direction  versus
	sound/soc/sh/fsi.c:1307:42:     int enum dma_transfer_direction

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 09:34:05 -05:00
Lars-Peter Clausen c8e6e96073 ASoC: rcar: Use && instead of & for boolean expressions
Sparse spits out the following warning:
	sound/soc/sh/rcar/gen.c:250:21: warning: dubious: x & !y

It does this because sometimes mixing boolean and bit-wise logic has not the
intended result. In this case we are fine, but replacing the bit-wise '&' with
the boolean '&&' silences the sparse warning. The generated code for both cases
is the same.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 09:33:11 -05:00
Lars-Peter Clausen d80a12f924 ASoC: odrodix2_max98090: Make non exported symbols static
odroidx2_drvdata and odroidu3_drvdata are not used outside this module so make
them static (and also const while we are at it).

Fixes the following warnings from sparse:
    sound/soc/samsung/odroidx2_max98090.c:69:26: warning: symbol
     'odroidx2_drvdata' was not declared. Should it be static?
    sound/soc/samsung/odroidx2_max98090.c:74:26: warning: symbol
     'odroidu3_drvdata' was not declared. Should it be static?

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 09:31:52 -05:00
Lars-Peter Clausen 371e07ec83 ASoC: edma-pcm: Include edma-pcm.h
edma_pcm_platform_register() is declared in edma-pcm.h and defined in
edma-pcm.c. To make sure that the function signature matches for both
edma-pcm.c should include edma-pcm.h

Fixes the following sparse warning:
	sound/soc/davinci/edma-pcm.c:48:5: warning: symbol
	 'edma_pcm_platform_register' was not declared. Should it be static?

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 09:31:06 -05:00
Hans Wennborg 4b6fe45a79 pinctrl: pinctrl-at91.c: fix decimal printf format specifiers prefixed with 0x
The prefix suggests the number should be printed in hex, so use
the %x specifier to do that.

Found by using regex suggested by Joe Perches.

Signed-off-by: Hans Wennborg <hans@hanshq.net>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:15:44 -05:00
Patrice CHOTARD 1d54f0fd58 pinctrl: abx500: remove useless check
pctldev can't be NULL at this stage so remove the check

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:15:44 -05:00
Dan Carpenter 8a3cfb7c17 pinctrl: tegra-xusb: testing wrong variable in probe()
There is a cut and paste bug so we test the wrong variable.  "err" is
never less than zero at this point.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:15:44 -05:00
Dan Carpenter 8e1594db7e pinctrl: tegra-xusb: fix an off by one test
This shoudld be ">= ARRAY_SIZE()" instead of "> ARRAY_SIZE()".

Fixes: dc0a393866 ('pinctrl: Add NVIDIA Tegra XUSB pad controller support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:15:44 -05:00
Sonny Rao 99e872d953 pinctrl: rockchip: fix rk3288 gpio0 configuration
On rk3288, for gpio bank 0, the registers which configure pull-up,
iomux, and drive strength don't implement the enable bits in the upper
half of the register, unlike the other gpio configuration registers,
and so the kernel must perform a read-modify-write of the register to
update a particular gpio in that bank.

The current code is actually clobbering the contents of the register,
so this fixes it by using regmap_update_bits and masking out only the
bits which require updating.  In the case of bank0 on rk3288 the upper
enable bits will just get ignored, and the other configurations won't
get clobbered.

Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:15:43 -05:00
Sergei Shtylyov 302fb17817 sh-pfc: r8a7791: fix CAN pin groups
I had made last-minute changes before submitting the patch "sh-pfc: r8a7791:
add CAN pin groups"; now I'm seeing that they weren't complete: I had missed
update to the pin group names in pin[01]_groups[]. Drop the "_a" suffixes there.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:15:43 -05:00
Seunghun Lee eb29835fb3 staging: android: fix a possible memory leak
Memory allocated by kstrdup should be freed.

CC: Brian Swetland <swetland@google.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-17 07:15:10 -07:00
Rickard Strandqvist 299ef8cd65 staging: lustre: lustre: libcfs: workitem.c: Cleaning up missing null-terminate after strncpy call
Added a guaranteed null-terminate after call to strncpy.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-17 07:15:10 -07:00
Julia Lawall 8a69155040 gpio: delete unneeded test before of_node_put
Of_node_put supports NULL as its argument, so the initial test is not
necessary.

Suggested by Uwe Kleine-König.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

-if (e)
   of_node_put(e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:12:35 -05:00
Lars-Peter Clausen 6dd8595083 gpio: zynq: Fix IRQ handlers
The Zynq GPIO interrupt handling code as two main issues:
1) It does not support IRQF_ONESHOT interrupt since it uses handle_simple_irq()
for the interrupt handler. handle_simple_irq() does not do masking and unmasking
of the IRQ that is required for this chip to be able to support IRQF_ONESHOT
IRQs, causing the CPU to lock up in a interrupt storm if such a interrupt is
requested.
2) Interrupts are acked after the primary interrupt handlers for all asserted
interrupts in a bank have been called. For edge triggered interrupt this is to
late and may cause a interrupt to be missed. For level triggered oneshot
interrupts this is to early and causes the interrupt handler to run twice per
interrupt.

This patch addresses the issue by updating the driver to use the correct IRQ
chip handler functions that are appropriate for this kind of IRQ controller.

The following diagram gives an overview of how the interrupt detection circuit
works, it is not necessarily a accurate depiction of the real hardware though.

     INT_POL/INT_ON_ANY
           |
           | +---+                       INT_STATUS
           `-|   |                            |
             | E |-.                          |
         ,---|   |  \     |\          +----+  |  +---+
         |   +---+   `----| | ,-------|S   | ,*--|   |
GPIO_IN -*                | |-        |   Q|-    | & |-- IRQ_OUT
         |   +---+  ,-----| |       ,-|R   |   ,o|   |
         `---|   | /      |/       |  +----+  |  +---+
             | = |-        |       |          |
           ,-|   |    INT_TYPE    ACK     INT_MASK
           | +---+
           |
        INT_POL

GPIO_IN is the raw signal level connected to the hardware pin. This signal is
routed to a edge detector and to a level detector. The edge detector can be
configured to either detect a rising or falling edge or both edges. The level
detector can detect either a level high or level low event. Depending on the
setting of the INT_TYPE register either the edge or level event will be
propagated to the INT_STATUS register. As long as a interrupt condition is
detected the INT_STATUS register will be set to 1. It can be cleared to 0 if
(and only if) the interrupt condition is no longer detected and software
acknowledges the interrupt by writing a 1 to the address of the INT_STATUS
register. There is also the INT_MASK register which can be used to disable the
propagation of the INT_STATUS signal to the upstream IRQ controller. What is
important to note is that the interrupt detection logic itself can not be
disabled, only the propagation of the INT_STATUS register can be delayed. This
means that for level type interrupts the interrupt must only be acknowledged
after the interrupt source has been cleared otherwise it will stay asserted and
the interrupt handler will be run a second time. For IRQF_ONESHOT interrupts
this means that the IRQ must only be acknowledged after the threaded interrupt
has finished running. If a second interrupt comes in between handling the first
interrupt and acknowledging it the external interrupt will be asserted, which
means trying to acknowledge the first interrupt will not clear the INT_STATUS
register and the interrupt handler will be run a second time when the IRQ is
unmasked, so no interrupts will be lost. The handle_fasteoi_irq() handler in
combination with the IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED flags will
have the desired behavior. For edge triggered interrupts a slightly different
strategy is necessary. For edge triggered interrupts the interrupt condition is
only true when the edge itself is detected, this means this is the only time the
INT_STATUS register is set, acknowledging the interrupt any time after that will
clear the INT_STATUS register until the next interrupt happens. This means in
order to not loose any interrupts the interrupt needs to be acknowledged before
running the interrupt handler. If a second interrupt occurs after the first
interrupt handler has finished but before the interrupt is unmasked the
INT_STATUS register will be re-asserted and the interrupt handler runs a second
time once the interrupt is unmasked. This means with this flow handling strategy
no interrupts are lost for edge triggered interrupts. The handle_level_irq()
handler will have the desired behavior. (Note: The handle_edge_irq() only needs
to be used for edge triggered interrupts where the controller stops detecting
the interrupt event when the interrupt is masked, for this controller the
detection logic still works, while only the propagation is delayed when the
interrupt is masked.)

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:12:35 -05:00
Julia Lawall 0f05a3ae45 gpiolib: devres: use correct structure type name in sizeof
Correct typo in the name of the type given to sizeof.  Because it is the
size of a pointer that is wanted, the typo has no impact on compilation or
execution.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).  The
semantic patch used can be found in message 0 of this patch series.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:12:35 -05:00
Markus Mayer 5e163903ba MAINTAINERS: Change maintainer for gpio-bcm-kona.c
Since I no longer have access to the hardware, Ray Jui will take over
maintaining the Kona GPIO driver.

In addition, my former e-mail addresses mmayer@broadcom.com and
markus.mayer@linaro.org will cease to function shortly. So, I used an
address I can still be reached at as the "author" addess here.

Signed-off-by: Markus Mayer <code@mmayer.net>
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:12:35 -05:00
Mark Einon ec0a38bf8b staging: et131x: Fix errors caused by phydev->addr accesses before initialisation
Fix two reported bugs, caused by et131x_adapter->phydev->addr being accessed
before it is initialised, by:

- letting et131x_mii_write() take a phydev address, instead of using the one
  stored in adapter by default. This is so et131x_mdio_write() can use it's own
  addr value.
- removing implementation of et131x_mdio_reset(), as it's not needed.
- moving a call to et131x_disable_phy_coma() in et131x_pci_setup(), which uses
  phydev->addr, until after the mdiobus has been registered.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=80751
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77121
Cc: stable@vger.kernel.org
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-17 07:07:55 -07:00
Pranith Kumar e409842a03 staging: lustre: Remove circular dependency on header
The following patch fixes a build error on sparc32. I think it should go to
stable 3.16.

Remove a circular dependency on atomic.h header file which leads to compilation
failure on sparc32 as reported here:
http://kisskb.ellerman.id.au/kisskb/buildresult/11340509/

The specific dependency is as follows:

In file included from arch/sparc/include/asm/smp_32.h:24:0,
                 from arch/sparc/include/asm/smp.h:6,
                 from arch/sparc/include/asm/switch_to_32.h:4,
                 from arch/sparc/include/asm/switch_to.h:6,
                 from arch/sparc/include/asm/ptrace.h:84,
                 from arch/sparc/include/asm/processor_32.h:16,
                 from arch/sparc/include/asm/processor.h:6,
                 from arch/sparc/include/asm/barrier_32.h:4,
                 from arch/sparc/include/asm/barrier.h:6,
                 from arch/sparc/include/asm/atomic_32.h:17,
                 from arch/sparc/include/asm/atomic.h:6,
                 from drivers/staging/lustre/lustre/obdclass/class_obd.c:38

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-17 07:07:55 -07:00
Axel Lin 1d3e6a6985 regulator: da9211: Check return value of devm_kzalloc()
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 08:55:16 -05:00
Geert Uytterhoeven 9ba1e456e1 regmap: Add explicit dependencies to catch "select" misuse
Add explicit dependencies for the various regmap modules, so Kconfig
will print a warning message when another module selects a regmap module
without fulfilling its dependencies.

Without this, it's much more difficult to find out which module did the
offending select.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 08:54:14 -05:00
Lars-Peter Clausen f294afed03 ASoC: Use dev_set_name() instead of init_name
init_name is basically a hack and should only be used for statically allocated
device structs. For dynamically allocated devices dev_set_name() should be used.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 08:22:18 -05:00
Lars-Peter Clausen 8a36eaa2ff ASoC: dmic: Add to SND_SOC_ALL_CODECS
Improve build coverage of the dmic driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-17 08:21:56 -05:00
Mikko Perttunen 0e5740770f ata: ahci_tegra: Change include to fix compilation
Before this patch, the driver included <linux/tegra-powergate.h>,
which was effectively renamed to <soc/tegra/pmc.h> at about the same
time the ahci_tegra series landed. Fix the include path so that the
driver compiles.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 07:24:53 -04:00
Arjun Sreedharan b741e8d4cf pata_samsung_cf: change ret type to signed
Change return type to signed int since it could be
a negative errno.

Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 07:24:48 -04:00
Suman Tripathi 72f79f9e35 ahci_xgene: Removing NCQ support from the APM X-Gene SoC AHCI SATA Host Controller driver.
This patch removes the NCQ support from the APM X-Gene SoC AHCI
Host Controller driver as it doesn't support it.

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-08-17 07:24:43 -04:00
Pavel Shilovsky b46799a8f2 CIFS: Fix wrong directory attributes after rename
When we requests rename we also need to update attributes
of both source and target parent directories. Not doing it
causes generic/309 xfstest to fail on SMB2 mounts. Fix this
by marking these directories for force revalidating.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-08-17 05:08:46 -05:00
Pavel Shilovsky 52755808d4 CIFS: Fix SMB2 readdir error handling
SMB2 servers indicates the end of a directory search with
STATUS_NO_MORE_FILE error code that is not processed now.
This causes generic/257 xfstest to fail. Fix this by triggering
the end of search by this error code in SMB2_query_directory.

Also when negotiating CIFS protocol we tell the server to close
the search automatically at the end and there is no need to do
it itself. In the case of SMB2 protocol, we need to close it
explicitly - separate close directory checks for different
protocols.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-08-17 05:08:39 -05:00
Chen-Yu Tsai 1890f518d9 ARM: dts: sun8i: Add pin-muxing info for the i2c controllers
This adds pin-muxing info for the i2c controller / port combinations
which are known to be used on actual boards.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:59:38 +02:00
Chen-Yu Tsai cd78d3f2d7 ARM: dts: sun8i: Enable mmc controller on ippo-q8h-v5
The card detect pin setting was taken from the original fex file,
and is confirmed to work.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:59:29 +02:00
Chen-Yu Tsai eacda1f11f ARM: dts: sun8i: Add mmc controller nodes
Add nodes for the 3 mmc controllers found on A23 SoCs to the sun8i DTSI.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:59:14 +02:00
Chen-Yu Tsai cdb6fd6798 ARM: dts: sun8i: Add pin-muxing info for the mmc controllers
This adds pin-muxing info for the mmc controller / port combinations
which are known to be used on actual boards.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:58:43 +02:00
Chen-Yu Tsai 4b7ecb38d8 ARM: dts: sun8i: Add mmc clocks to the dtsi
The MMC module clocks on sun8i are the same as those found on
previous Allwinner SoCs, module 0 clocks.

This patch adds the clocks nodes to the dtsi with existing drivers.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:58:29 +02:00
Chen-Yu Tsai 1c602064e0 ARM: dts: sun8i: ippo-q8h: Add pinctrl properties for R_UART
Now that we have R_PIO controller support and the pinmux for R_UART,
add the correct pinctrl properties to the R_UART node.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:58:16 +02:00
Chen-Yu Tsai 8130979158 ARM: dts: sun8i: Add pin muxing option for R_UART
R_UART is available on extra pads on certain tablets, which makes it
ideal for use as a console. Here we add the pins for it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:58:07 +02:00
Chen-Yu Tsai c4021571e3 ARM: dts: sun8i: Add pinmux set for uart0
uart0 on sun8i is only muxed with mmc0, which makes it a poor choice
for the console. However, some tablets only have pads for uart0
available on the circuit board.

Here we add the uart0 pinmux set for people who need it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:50 +02:00
Chen-Yu Tsai b6a8711261 ARM: dts: sun8i: Add R_PIO controller node to the dtsi
Now that we have a driver for the R_PIO controller,
add the corresponding device node to the dtsi.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:39 +02:00
Chen-Yu Tsai 6b2b16f579 ARM: dts: sun8i: Add PIO controller node to the sun8i dtsi
Now that we have a driver for the sun8i PIO controller,
add the corresponding device node to the dtsi.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:25 +02:00
Emilio López ffec7210e1 ARM: sun7i: dt: enable DMA on SPI
All of our SPI controllers support DMA transfers, so let's add the
properties here so they can be used when it's best to do so.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:13 +02:00
Emilio López fed4c5c676 ARM: sun5i: dt: enable DMA on SPI
All of our SPI controllers support DMA transfers, so let's add the
properties here so they can be used when it's best to do so.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:12 +02:00
Emilio López 4192ff8117 ARM: sun4i: dt: enable DMA on SPI
All of our SPI controllers support DMA transfers, so let's add the
properties here so they can be used when it's best to do so.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:11 +02:00
Emilio López 316e0b0eeb ARM: sun7i: dt: Add node to represent the DMA controller
The A20 SoC has a sun4i-compatible DMA controller. Let's add a node to
represent it on the device tree.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:11 +02:00
Emilio López 6a5775e482 ARM: sun5i: dt: Add nodes to represent the DMA controllers
The A10S and A13 SoCs have sun4i-compatible DMA controllers. Let's add
the corresponding nodes to represent them on the device tree.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:10 +02:00
Emilio López 1324f53211 ARM: sun4i: dt: Add node to represent the DMA controller
Let's add a node to represent the A10 DMA controller on the device tree.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:09 +02:00
Chen-Yu Tsai 5e7004351a ARM: dts: sun6i: add rtc device node
Now that we have a driver for sun6i's rtc hardware, add a device node
for it so we can use it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:09 +02:00
Chen-Yu Tsai 3b1213f551 ARM: dts: sun8i: add rtc device node
sun8i shares the same rtc hardware as sun6i. Now that we have a driver
for it, add a device node to the DTSI for it so we can use it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-17 09:57:08 +02:00
Steve French 18f39e7be0 [CIFS] Possible null ptr deref in SMB2_tcon
As Raphael Geissert pointed out, tcon_error_exit can dereference tcon
and there is one path in which tcon can be null.

Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org> # v3.7+
Reported-by: Raphael Geissert <geissert@debian.org>
2014-08-17 00:41:02 -05:00
Erik Hugne ac32c7f705 tipc: fix message importance range check
Commit 3b4f302d85 ("tipc: eliminate
redundant locking") introduced a bug by removing the sanity check
for message importance, allowing programs to assign any value to
the msg_user field. This will mess up the packet reception logic
and may cause random link resets.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-16 20:17:34 -07:00
Gwenhael Goavec-Merou 2100968666 net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function
On the one hand, phy_device.c provides a generic reset function if the phy
driver does not provide a soft_reset pointer. This generic reset does not take
into account the state of the phy, with a potential failure if the phy is in
powerdown mode. On the other hand, smsc driver provides a function with both
correct reset behaviour and configuration.

This patch moves the reset part into a new smsc_phy_reset function and provides
the soft_reset pointer to have a correct reset behaviour by default.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-16 20:15:54 -07:00