Revert sync at 1000Hz, it is too CPU taxing: #474

* added gitpod/docker

.circleci/config.yml

@@ -0,0 +1,88 @@
+# Use the latest 2.1 version of CircleCI pipeline process engine.
+# See: https://circleci.com/docs/2.0/configuration-reference
+version: 2.1
+
+jobs:
+  build-std:
+    docker:
+      - image: ajjjjjjjj/opentx-docker-i6x:1.4.0
+    steps:
+      - checkout
+      - run: |
+          python3 ./tools/build-flysky.py -bI6X -tALL $PWD/
+      - store_artifacts:
+          path: output
+
+  build-std-dfplayer:
+    docker:
+      - image: ajjjjjjjj/opentx-docker-i6x:1.4.0
+    steps:
+      - checkout
+      - run: |
+          python3 ./tools/build-flysky.py -bI6X_DFPLAYER -tALL $PWD/
+      - store_artifacts:
+          path: output
+
+  build-heli:
+    docker:
+      - image: ajjjjjjjj/opentx-docker-i6x:1.4.0
+    steps:
+      - checkout
+      - run: |
+          python3 ./tools/build-flysky.py -bI6X_HELI -tALL $PWD/
+      - store_artifacts:
+          path: output
+
+  build-heli-dfplayer:
+    docker:
+      - image: ajjjjjjjj/opentx-docker-i6x:1.4.0
+    steps:
+      - checkout
+      - run: |
+          python3 ./tools/build-flysky.py -bI6X_HELI_DFPLAYER -tALL $PWD/
+      - store_artifacts:
+          path: output
+
+  build-en:
+    docker:
+      - image: ajjjjjjjj/opentx-docker-i6x:1.4.0
+    steps:
+      - checkout
+      - run: |
+          python3 ./tools/build-flysky.py -bI6X_DFPLAYER -bI6X_HELI -bI6X -tEN $PWD/
+      - store_artifacts:
+          path: output
+
+workflows:
+  openi6x-release-workflow:
+    jobs:
+      - build-en:
+          filters:
+            branches:
+              ignore:
+                - master
+                - /.*-maintenance/
+      - build-std:
+          filters:
+            branches:
+              only:
+                - master
+                - /.*-maintenance/
+      - build-std-dfplayer:
+          filters:
+            branches:
+              only:
+                - master
+                - /.*-maintenance/
+      - build-heli:
+          filters:
+            branches:
+              only:
+                - master
+                - /.*-maintenance/
+      - build-heli-dfplayer:
+          filters:
+            branches:
+              only:
+                - master
+                - /.*-maintenance/

.gitattributes

@@ -0,0 +1,112 @@
+# Handle line endings automatically for files detected as text
+# and leave all files detected as binary untouched.
+* text=auto
+
+#
+# The above will handle all files NOT found below
+#
+# These files are text and should be normalized (Convert crlf => lf)
+
+# Source files
+*.c text
+*.cc text
+*.cxx text
+*.cpp text
+*.c++ text
+*.hpp text
+*.h text
+*.h++ text
+*.hh text
+*.lua text
+*.pxd text
+*.py text
+*.py3 text
+*.pyw text
+*.pyx text
+*.pl text
+*.pm text
+*.sln text eol=crlf
+*.csproj text eol=crlf
+*.vbproj text eol=crlf
+*.vcxproj text eol=crlf
+*.vcproj text eol=crlf
+*.dbproj text eol=crlf
+*.fsproj text eol=crlf
+*.lsproj text eol=crlf
+*.wixproj text eol=crlf
+*.modelproj text eol=crlf
+*.sqlproj text eol=crlf
+*.wmaproj text eol=crlf
+*.xproj text eol=crlf
+*.props text eol=crlf
+*.filters text eol=crlf
+*.vcxitems text eol=crlf
+*.sh eol=lf
+
+# Compiled Object files
+*.slo binary
+*.lo binary
+*.o binary
+*.obj binary
+
+# Precompiled Headers
+*.gch binary
+*.pch binary
+
+# Compiled Dynamic libraries
+*.so binary
+*.dylib binary
+*.dll binary
+
+# Compiled Static libraries
+*.lai binary
+*.la binary
+*.a binary
+*.lib binary
+
+# Executables
+*.exe binary
+*.out binary
+*.app binary
+
+# Binary files
+*.db binary
+*.p binary
+*.pkl binary
+*.pyc binary
+*.pyd binary
+*.pyo binary
+
+# Documents
+*.doc diff=astextplain
+*.DOC diff=astextplain
+*.docx diff=astextplain
+*.DOCX diff=astextplain
+*.dot diff=astextplain
+*.DOT diff=astextplain
+*.pdf diff=astextplain
+*.PDF diff=astextplain
+*.rtf diff=astextplain
+*.RTF diff=astextplain
+*.md text
+*.adoc text
+*.textile text
+*.mustache text
+*.csv text
+*.tab text
+*.tsv text
+*.sql text
+
+# Graphics
+*.png binary
+*.jpg binary
+*.jpeg binary
+*.gif binary
+*.tif binary
+*.tiff binary
+*.ico binary
+# SVG treated as an asset (binary) by default. If you want to treat it as text,
+# comment-out the following line and uncomment the line after.
+*.svg binary
+#*.svg text
+*.eps binary

.github/ISSUE_TEMPLATE/bug.md

@@ -0,0 +1,30 @@
+---
+name: Bug report
+about: Create a report to help the OpenTX team to improve OpenTX
+
+---
+*Before submitting,  search the open issue if there is already a report of the bug*
+
+Also often minor bugs are already fixed in nightly builds, often it is
+a good idea to test (in a controlled environment like a bench setup)
+with a nightly firmware to see if the bug still exists.
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**General information**
+ - OpenI6X version (e.g. 1.8.0)
+ - Hardware (e.g. external module model)

.github/ISSUE_TEMPLATE/help.md

@@ -0,0 +1,16 @@
+---
+name: Help
+about: Problems or question of using OpenTX
+
+--- 
+
+The issue tracker here is for devlopment of OpenTX. This is not a
+support site, only a bug tracking system. Please use support groups
+like [rcgroups](https://rcgroups.com/) or
+[openrcforum](https://www.openrcforums.com/forum/). See also our
+[manual](https://opentx.gitbooks.io/manual-for-opentx-2-2/).
+
+For quick questions you can also join our general chat.
+
+Issues that fall into the category of asking for help, will be
+generally closed as invalid without an answer.

.github/ISSUE_TEMPLATE/newfeature.md

@@ -0,0 +1,18 @@
+---
+name: Feature request
+about: Suggest an idea for this project to make OpenTX even better
+
+---
+*Before suggesting a new feature here, please search the open issue if there is already a request for the feature*
+
+**Is your feature request related to a problem? Please describe.**
+A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.gitignore

@@ -2,12 +2,22 @@
 /.*project
 /.settings
 /.autotools
-radio/src/bootloader/.dep/
-radio/src/bootloader/bootloader_ramBoot*
-*.lbm
-*.o
-/doc/
-*.stamp
-radio/src/lua/lua_fields_*.txt
-radio/src/lua/lua_exports_*.txt
+/*.user
+/*.user.*
 build*/
+cmake-build-*/
+/debian/
+/CMakeFiles/*
+radio/src/CmakeFiles/*
+/.vscode/
+*.cmake
+*.make
+*.marks
+/nbproject/
+*.bin
+/radio/src/CMakeFiles/firmware.dir/link.txt
+.push.settings.jsonc
+build.sh
+firm.sh
+flash.sh
+*.patch

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "radio/src/thirdparty/GCS_MAVLink/include_v1.0"]
+	path = radio/src/thirdparty/GCS_MAVLink/include_v1.0
+	url = https://github.com/mavlink/c_library_v1.git

.gitpod.yml

@@ -0,0 +1,7 @@
+# .gitpod.yml
+image:
+  file: Dockerfile
+
+tasks:
+  - init: echo 'Welcome!'
+  - command: mkdir build && cd build

.travis.yml

@@ -1,27 +1,60 @@
 sudo: required
 dist: trusty
-language: python
+language: cpp
+compiler: gcc
 
-virtualenv:
-  system_site_packages: true
-
-python:
-  - 3.4
+env:
+  global:
+    # - QT_BASE=53
+    # - QT_BASE=54
+    # - QT_BASE=55
+    # - QT_BASE=56
+    - QT_BASE=57
+    # - GCC_ARM=/opt/gcc-arm-none-eabi/bin
+    - PYTHONPATH=${PYTHONPATH}:/usr/lib/python3/dist-packages
+  matrix:
+    #
+    # ALL will build every individual board & DEFAULT, sequentially.
+    # DEFAULT is "make all" (including Companion & Simulator), with default settings
+    #
+    # - FLAVOR=ALL
+    - FLAVOR=DEFAULT
+    - FLAVOR=ARM9X
+    # - FLAVOR=AR9X
+    # - FLAVOR=SKY9X
+    # - FLAVOR=9XRPRO
+    - FLAVOR=X7
+    - FLAVOR=XLITE
+    - FLAVOR=X9
+    # - FLAVOR=X9D
+    # - FLAVOR=X9D+
+    # - FLAVOR=X9E
+    - FLAVOR=HORUS
+    # - FLAVOR=X10
+    # - FLAVOR=X12Sr10
+    # - FLAVOR=X12S
 
 before_install:
   - sudo add-apt-repository ppa:ubuntu-sdk-team/ppa --yes
   - sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded --yes
   - sudo add-apt-repository ppa:ubuntu-toolchain-r/test --yes
+  - if [ "$QT_BASE" = "53" ]; then sudo add-apt-repository ppa:beineri/opt-qt532-trusty -y; fi
+  - if [ "$QT_BASE" = "54" ]; then sudo add-apt-repository ppa:beineri/opt-qt542-trusty -y; fi
+  - if [ "$QT_BASE" = "55" ]; then sudo add-apt-repository ppa:beineri/opt-qt551-trusty -y; fi
+  - if [ "$QT_BASE" = "56" ]; then sudo add-apt-repository ppa:beineri/opt-qt562-trusty -y; fi
+  - if [ "$QT_BASE" = "57" ]; then sudo add-apt-repository ppa:beineri/opt-qt571-trusty -y; fi
   - sudo apt-get update -qq
+  - pyenv uninstall -f 2.7.6 && pyenv install 3.5.4 && pyenv global 3.5.4
+  - pip install pillow
 
 install:
-  - sudo apt-get --yes --force-yes install qtbase5-dev qtmultimedia5-dev qttools5-dev qttools5-dev-tools python3-pyqt5 curl gcc-arm-none-eabi libfox-1.6-dev libgtest-dev
-  - wget --quiet http://firmware.ardupilot.org/Tools/Travis/gcc-avr_1%253a4.8-2.1_amd64.deb
-  - wget --quiet http://firmware.ardupilot.org/Tools/Travis/libmpfr4_3.1.2-1_amd64.deb
-  - wget --quiet http://firmware.ardupilot.org/Tools/Travis/avr-libc_1%253a1.8.0-4.1_all.deb
-  - wget --quiet http://firmware.ardupilot.org/Tools/Travis/binutils-avr_2.23.1-2.1_amd64.deb
-  - wget --quiet http://firmware.ardupilot.org/Tools/Travis/libmpc3_1.0.1-1ubuntu1_amd64.deb
-  - sudo dpkg --install gcc-avr_1%3a4.8-2.1_amd64.deb avr-libc_1%3a1.8.0-4.1_all.deb libmpfr4_3.1.2-1_amd64.deb binutils-avr_2.23.1-2.1_amd64.deb libmpc3_1.0.1-1ubuntu1_amd64.deb
+  - sudo apt-get --yes --force-yes install curl libmpfr4 libmpc3 libfox-1.6-dev libgtest-dev
+  - sudo apt-get --yes --force-yes install gcc-arm-none-eabi
+      # Trying to build with gcc-arm 4.7 isn't working because it can't find the compiler, despite adding to PATH (in commit-tests.sh) by defining GCC_ARM above
+      # - wget --quiet https://launchpad.net/gcc-arm-embedded/4.7/4.7-2013-q3-update/+download/gcc-arm-none-eabi-4_7-2013q3-20130916-linux.tar.bz2
+      # - tar xjf gcc-arm-none-eabi-4_7-2013q3-20130916-linux.tar.bz2
+      # - mv gcc-arm-none-eabi-4_7-2013q3 /opt/gcc-arm-none-eabi
+  - sudo apt-get install --yes --force-yes -qq qt${QT_BASE}base qt${QT_BASE}multimedia qt${QT_BASE}svg qt${QT_BASE}tools; source /opt/qt${QT_BASE}/bin/qt${QT_BASE}-env.sh
 
 script:
-  - ./tools/commit-tests.sh .
+  - ./tools/commit-tests.sh

CMakeLists.txt

@@ -1,57 +1,196 @@
 project(OpenTX)
 
 set(VERSION_MAJOR "2")
-set(VERSION_MINOR "2")
+set(VERSION_MINOR "1")
 set(VERSION_REVISION "0")
 set(VERSION_SUFFIX $ENV{OPENTX_VERSION_SUFFIX})
 set(VERSION_FAMILY ${VERSION_MAJOR}.${VERSION_MINOR})
 set(VERSION ${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_REVISION}${VERSION_SUFFIX})
-message(STATUS "OpenTX ${VERSION}")
+set(SDCARD_REVISION "0018")
+set(SDCARD_VERSION  ${VERSION_MAJOR}.${VERSION_MINOR}V${SDCARD_REVISION})
 
-cmake_minimum_required(VERSION 2.8)
+cmake_minimum_required(VERSION 3.13)
 cmake_policy(SET CMP0020 NEW)
 cmake_policy(SET CMP0023 OLD)
+if(POLICY CMP0042)
+  cmake_policy(SET CMP0042 NEW)
+endif()
 if(POLICY CMP0043)
   cmake_policy(SET CMP0043 NEW)
 endif()
+if(POLICY CMP0054)
+  cmake_policy(SET CMP0054 NEW)
+endif()
+if(POLICY CMP0058)
+  cmake_policy(SET CMP0058 NEW)  # for ninja
+endif()
+
+set(CMAKE_COLOR_MAKEFILE ON)
 
 set(CMAKE_CXX_STANDARD 11)
 
 set(RADIO_DIRECTORY ${PROJECT_SOURCE_DIR}/radio)
 set(RADIO_SRC_DIRECTORY ${RADIO_DIRECTORY}/src)
 set(COMPANION_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/companion/src)
+set(SIMU_SRC_DIRECTORY ${COMPANION_SRC_DIRECTORY}/simulation)
 
 set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR})
 set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR})
 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${PROJECT_SOURCE_DIR}/cmake)
 
-find_package(Qt5Widgets)
-find_package(Qt5Xml)
-find_package(Qt5LinguistTools)
-find_package(Qt5PrintSupport)
-find_package(Qt5Multimedia)
-
-message(STATUS "Looking for SDL ")
-find_package(Sdl)
-if(SDL_FOUND)
-  message("SDL Include Path: " ${SDL_INCLUDE_DIR})
-else()
-  message("SDL not found! Joysticks support will be disabled. Simulator audio will not work.")
-endif()
-
-message(STATUS "Looking for FOX ")
-find_package(Fox)
-if ((NOT FOX_FOUND) AND (NOT WIN32))
-  message("Libfox not found, simu target will not be available")
-endif()
-
 include(Macros)
 today(DATE)
 now(TIME)
 git_id(GIT_STR)
 
+message(STATUS "OpenI6X ${VERSION} @${GIT_STR}")
+
+# options shared by all targets
+
+option(APP_CUSTOM_DBG_HANDLER "Use custom message handler for debug output in all Qt apps." ON)
+set(APP_CUSTOM_DBG_LEVEL "0" CACHE STRING
+  "Debug output level: 0=debug+; 1=info+; 2=warn+; 3=critical+; 4=fatal only.")
+set(APP_CUSTOM_DBG_SHOW_FILE "DEFAULT" CACHE STRING
+  "Show source file names in debug output. 1/0/DEFAULT (default is ON with DEBUG builds).")
+
+option(VERBOSE_CMAKELISTS "Show extra information while processing CMakeLists.txt files." OFF)
+option(WARNINGS_AS_ERRORS "Treat any compiler warning as an error (adds -Werror flag)." OFF)
+
+if(WIN32)
+  set(WIN_EXTRA_LIBS_PATH "C:/Programs" CACHE PATH
+    "Base path to extra libs/headers on Windows (SDL & pthreads folders should be in here).")
+  list(APPEND CMAKE_PREFIX_PATH "${WIN_EXTRA_LIBS_PATH}" "${WIN_EXTRA_LIBS_PATH}/SDL")  # hints for FindSDL
+endif()
+
+# Python check
+find_package("PythonInterp")
+if(PYTHONINTERP_FOUND)
+  message(STATUS "Python found, version: ${PYTHON_VERSION_STRING}")
+  get_filename_component(PYTHON_DIRECTORY ${PYTHON_EXECUTABLE} DIRECTORY)
+else()
+  message(WARNING "Python not found! Most firmware and simu flavors not buildable.")
+  set(LUA NO)
+endif()
+
+if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")  # regular Clang or AppleClang
+  set(CLANG TRUE)
+endif()
+
+option(DISABLE_COMPANION "Disable building companion and simulators" OFF)
+
+if(NOT DISABLE_COMPANION)  # FIXME cosmetics/style
+find_package(Qt5Core)
+find_package(Qt5Widgets)
+find_package(Qt5Xml)
+find_package(Qt5LinguistTools)
+find_package(Qt5PrintSupport)
+find_package(Qt5Multimedia)
+find_package(Qt5Svg)
+
+if(Qt5Core_FOUND)
+  message(STATUS "Qt Version: ${Qt5Core_VERSION}")
+
+  ### Get locations of Qt binary executables & libs (libs are for distros, not for linking)
+  # first set up some hints
+  get_target_property(QtCore_LOCATION Qt5::Core LOCATION)
+  get_filename_component(qt_core_path ${QtCore_LOCATION} PATH)
+  if(APPLE)
+    get_filename_component(qt_core_path "${qt_core_path}/.." ABSOLUTE)
+  endif()
+
+  set(QT_LIB_DIR ${qt_core_path} CACHE PATH "Path to Qt libraries (.dll|.framework|.so).")
+  find_path(QT_BIN_DIR NAMES "qmake" "qmake.exe" HINTS "${CMAKE_PREFIX_PATH}/bin" "${qt_core_path}/../bin" "${qt_core_path}" DOC "Path to Qt binaries (qmake, lupdate, etc.).")
+  find_program(QT_QMAKE_EXECUTABLE qmake HINTS "${QT_BIN_DIR}" DOC "Location of qmake program.")
+  find_program(QT_LUPDATE_EXECUTABLE lupdate HINTS "${QT_BIN_DIR}" DOC "Location of Qt's 'lupdate' program for updating translation files.")
+
+  # Try to find Qt translations
+  if(QT_QMAKE_EXECUTABLE)
+    execute_process(
+      COMMAND ${QT_QMAKE_EXECUTABLE} -query QT_INSTALL_TRANSLATIONS
+      OUTPUT_VARIABLE qt_translations_hint
+      OUTPUT_STRIP_TRAILING_WHITESPACE
+      )
+  endif()
+  find_path(QT_TRANSLATIONS_DIR NAMES "qt_en.qm" HINTS "${qt_translations_hint}" DOC "Path to prebuilt Qt translations (qt_*.qm).")
+
+  ### Common definitions for the Qt-based apps
+  list(APPEND APP_COMMON_DEFINES -DSIMU)
+  list(APPEND APP_COMMON_DEFINES -DQXT_STATIC)
+  list(APPEND APP_COMMON_DEFINES -DQT_USE_QSTRINGBUILDER)  # more efficient QString construction using % operator
+
+  if(MSVC)
+    list(APPEND APP_COMMON_DEFINES -D__STDC_LIMIT_MACROS)
+  endif()
+  if(APP_CUSTOM_DBG_HANDLER)
+    # provide full qDebug log context to our custom handler. This may also affect libsimulator, which is why it is here
+    list(APPEND APP_COMMON_DEFINES -DQT_MESSAGELOGCONTEXT)
+    list(APPEND APP_COMMON_DEFINES -DAPP_DBG_HANDLER_ENABLE=1)
+    if(APP_CUSTOM_DBG_LEVEL GREATER -1 AND APP_CUSTOM_DBG_LEVEL LESS 5)
+      list(APPEND APP_COMMON_DEFINES -DAPP_DBG_HANDLER_DEFAULT_LEVEL=${APP_CUSTOM_DBG_LEVEL})
+    endif()
+    if(NOT APP_CUSTOM_DBG_SHOW_FILE STREQUAL "DEFAULT" AND (APP_CUSTOM_DBG_SHOW_FILE STREQUAL "1" OR APP_CUSTOM_DBG_SHOW_FILE STREQUAL "0"))
+      list(APPEND APP_COMMON_DEFINES -DAPP_DBG_HANDLER_SHOW_SRC_PATH=${APP_CUSTOM_DBG_SHOW_FILE})
+    endif()
+  else()
+    list(APPEND APP_COMMON_DEFINES -DAPP_DBG_HANDLER_ENABLE=0)
+  endif()
+
+else()
+  message(WARNING "Qt not found! Companion and Simulator builds disabled.")
+endif()
+
+if(NOT WIN32)
+  find_package(Fox QUIET)  # QUIET not working on WIN32?
+  if (FOX_FOUND)
+    message(STATUS "Foxlib found at ${FOX_LIBRARY}")
+  else() # if(NOT WIN32)
+    message("Libfox not found, simu target will not be available")
+  endif()
+endif()
+
+if(Qt5Core_FOUND OR FOX_FOUND)
+  set(SDL_BUILDING_LIBRARY YES)  # this prevents FindSDL from appending SDLmain lib to the results, which we don't want
+  find_package("SDL")
+  if(SDL_FOUND)
+    message(STATUS "SDL Lib: ${SDL_LIBRARY}; Headers: ${SDL_INCLUDE_DIR}; Version: ${SDL_VERSION_STRING}")
+    if (NOT ${SDL_VERSION_STRING} VERSION_LESS "2.0")
+      message(FATAL_ERROR "OpenTX requires SDL 1.x, not 2.x")
+    endif()
+  else()
+    message(STATUS "SDL not found! Simulator audio, and joystick inputs, will not work.")
+  endif()
+endif()
+endif(NOT DISABLE_COMPANION)
+
+# Check for a file that is typically left from a OpenTX 2.1 build and abort if found
+if (EXISTS ${RADIO_SRC_DIRECTORY}/stamp.h OR EXISTS ${RADIO_SRC_DIRECTORY}/translations/en.h)
+   message(FATAL_ERROR "Source directory contains files leftover from a OpenTX 2.1 build. Please run `git clean -f` in source directory (Careful: Will remove any extra files) or do a new clean git checkout")
+endif()
+
+# Windows-specific includes and libs shared by sub-projects
+if(WIN32)
+  list(APPEND WIN_INCLUDE_DIRS "${RADIO_SRC_DIRECTORY}/thirdparty/windows/dirent")
+  if(MSVC)
+    list(APPEND WIN_INCLUDE_DIRS "${RADIO_SRC_DIRECTORY}/thirdparty/windows/msinttypes")
+    set(WIN_PTHREAD_BASE_PATH "${WIN_EXTRA_LIBS_PATH}/pthreads/Pre-built.2" CACHE PATH "Where to find pthreads include and lib folders.")
+    list(APPEND WIN_INCLUDE_DIRS "${WIN_PTHREAD_BASE_PATH}/include")
+    find_file(WIN_PTHREAD_LIB pthreadVC2.lib PATHS "${WIN_PTHREAD_BASE_PATH}" PATH_SUFFIXES lib/x86 lib NO_DEFAULT_PATH)
+    find_file(WIN_PTHREAD_DLL pthreadVC2.dll PATHS "${WIN_PTHREAD_BASE_PATH}" PATH_SUFFIXES lib/x86 lib dll/x86 dll NO_DEFAULT_PATH)
+    if(WIN_PTHREAD_LIB)
+      list(APPEND WIN_LINK_LIBRARIES "${WIN_PTHREAD_LIB}")
+    else()
+      message(SEND_ERROR "pthreadVC2.lib not found!")
+    endif()
+  else()
+    set(CMAKE_C_USE_RESPONSE_FILE_FOR_INCLUDES OFF)
+    set(CMAKE_C_USE_RESPONSE_FILE_FOR_LIBRARIES OFF)
+    set(CMAKE_CXX_USE_RESPONSE_FILE_FOR_INCLUDES OFF)
+    set(CMAKE_CXX_USE_RESPONSE_FILE_FOR_LIBRARIES OFF)
+  endif()
+endif()
+
 add_subdirectory(${RADIO_SRC_DIRECTORY})
 
-if(Qt5Widgets_FOUND)
+if(Qt5Core_FOUND AND NOT DISABLE_COMPANION)
   add_subdirectory(${COMPANION_SRC_DIRECTORY})
 endif()

DONATIONS.txt

@@ -1,852 +0,0 @@
-<a href="http://frsky-rc.com">FrSky (monthly)</a>
-<a href="http://alofthobbies.com">Aloft Hobbies</a>
-<a href="http://jonathan.it">Jonathan Modellismo</a>
-<a href="http://wstech.de">WsTech</a>
-<a href="http://aviomotive.com">Aviomotive</a>
-<a href="http://boltrc.com">BoltRC</a>
-<a href="http://aerialtechhobbies.com">Aerial Tech Hobbies</a>
-<a href="http://litepilots.com">LitePilots</a>
-<a href="http://openpilot.com">David Ankers (OpenPilot)</a>
-<a href="http://3drobotics.com">3D Robotics</a>
-<a href="http://rcstudio.cz">RC Studio (monthly)</a>
-
-Mario Sette
-Felice Baratto
-Alessandro Mari
-Gianpiero Spontina
-Ingo Kuzniak
-Hans-Åke Rahm
-Tamas Varga
-Thomas Gregg
-Didier Christien
-Alain Pinard
-Sergio Melas
-Paul Montenot
-Chris Guy
-Adrien Gravouille
-Thomas Black
-Marc Lucht
-Zdenek Trojanek
-Martin Hotar
-Stefan Grundevik
-Fabio Eboli
-Federico Zotti
-Albin Esbjörnsson
-Kilian Hüttenhofer
-Stephen Stough
-Adilson Oliveira
-Robert Saint Marie
-Tad Leake
-Andreas Weitl
-Chan Lofland
-Dirk Kasten
-Denisov Alexander
-Timo Varppee
-Ondrej Hatapka
-Valérie Billon
-R. Scott Page
-Johan Cronje
-Renato Aranghelovici
-Jeffrey Irvin
-John Rodgers
-Kenneth Crump
-Damjan Adamic
-Martin Wilson
-Joe Street
-John Holdsworth
-Daniel Schwartz
-Dean Church (monthly)
-Michael Halse
-David Mark
-Ted Moss
-Jim Wagner
-Nicola Porzi
-Michael Halse
-Chewytm
-Espen Solbu
-Mike Frizell
-Bruce Jones
-Stefano Airaghi
-Dan Eeckhout
-Alex Calderhead
-Leonard MacKey
-Heung Jin Choi
-Mike Retterer
-Keith Wood
-Viljo Liukku
-Eric Beier
-Burt Pickard-Richardson
-Helmut Renz
-Rick Harms
-Vincenzo Vavala
-Patricia Martin
-Harald Klein
-Carl Petersen
-Douglas Burkett
-Clifford Evans
-Teodor Yantchev
-Jarad Berkman
-Christian Schulz
-Gregory J Shepherd
-Michael Shellim
-Ming Wang
-Bernard Lukaschek
-Nigel Chippindale
-Mike Perkins
-Ted Hammond 
-David Beanland
-Bernd Koehler
-Frédéric Duflos 
-Dave Fasken
-Heinrich Illig
-Michael Collins
-Michael Manning
-Craig Lorentz
-André Lasseret
-Felipe Alexandre de Oliveira
-Brian Harris
-Philippe Herbots
-Rainer Nelte
-Franck Bernhard
-Erhard Werner
-Stig Jøran Moen
-Keith Hertzog
-Christophe Dauvergne
-Tauno Rautakorpi
-Sven Assmus
-Paul Dittman
-Mike Matheny
-Cheryl Wynne
-Emay Toha
-Don Nolder
-André Lasseret
-Filip Lowette
-Arnaldo Gabella
-Fiorenzo Agnelli
-Michele Villa
-Christophe Rodriguez
-Larisa Filocamo
-Hartmut Sahm
-Åke Brodin
-Ted Moss
-Filippos Tigarakis
-Chewytm
-Eric Burdis
-Nigel Chippindale
-Michael Deasy
-Stephen Stough
-Kenneth Lilja (monthly)
-Robert Jero
-Gary Bancroft
-Robert Cotsford
-NorthSide
-George Constandinides
-Robert Schonk Jr
-Kevin Berkefeld
-Peter Webster
-Mike Matheny
-Martin Sniedze
-Fernando Rimoldi
-Sidney Fisher
-Bruce Anderson
-John Rodgers
-Ed Pare
-Thomas Kilduff
-Robert Ferguson
-Bryan Green
-Kevin Berkefeld
-Julien Michel
-Krittikun Chiraphanda
-Douglas Law
-Alberto Scotti
-Oliver Kunkel
-D. Joseph Frazier
-Heiko Polig
-Andrew Fernie
-Marco Lange
-Nick McMillan
-Michel Baily (monthly)
-Patrick Mullen
-Scott Campbell
-Erich Roeder
-Wayne Davy
-Michael Fontenot
-Willie Swanepoel
-Satoru Sasaki
-Tyler Darby
-Nicholas Crego
-Johan Moelich
-Timo Esser
-Brian Paddock
-Jean Pierre Parisy
-Norbert Martsch
-Jean-Marie Guitard
-Tilman Baumann
-Fred Larssen
-Ari Aalto
-Robert Sams 
-Kirk Robertson
-John Koontz
-Jeffery Golias
-Paul Robinson
-Dave Matison
-Mike Matheny
-Pino Agostino
-Graham Boucher
-Nelson Noura
-Joel Allamy
-Philip David Martin
-Sean Stephen
-Bruce Mackay
-Blake Spilman
-Timothy Pelletier
-Glen Roe (ShowMaster)
-Jan Van Ooteghem
-Lawrence Christensen
-Leo Duflou
-Bruce Wood
-Arnd Feige
-Tauno Rautakorpi
-Steve Coley
-Stefan Kiendl
-Gregory Nuspel
-Mitchell Brenner
-Ronnnie DePrez
-Ferenc Koller
-Robert Sessler
-Didier Lanot
-Rodney Hunt
-Steve Bernard
-Paul Nazaroff
-Gordon Ernenputsch
-Ksamak
-Marc Gittelman
-David Poole
-Ralph Sauer
-Karl-Heinz Gansel
-Michels Bernhard
-Thomas Demmelbauer
-Felice Baratto
-Michael Halse
-Horst Kampen
-Ian Gough
-Matthew Brett
-Lexington S Morley
-Clemens Drews
-Axel Stöckle
-Roberto Orsello
-Richard Ruck
-Hugh Caldwell
-Christian Marauli
-Albin Esbjörnsson
-Per Esbjörnsson
-Bernd Hohmann
-Sławomir Juszczak
-Stephen Henderson
-David Morgan
-Aloft Hobbies
-Netanel Hobara
-Cameron Galipo
-Doug Schafer
-Pietro Rossin
-Earl Killingsworth
-Victor B Wright
-Terry McKinley
-Марков Алексей
-Offer Shmuely
-Ian Lobley
-Stéphane Fortas
-Peter Mitrik
-Thomas Majewski
-ANF King
-Henrik Hammarström
-Kenneth Lilja
-R Wells
-Uwe Jordt
-Harald Wilczak
-Bernhard Lohmann
-Ferenc Koller
-Robert Ferguson
-Daniel Byers
-Tyler Darby
-Miguel Villalpando
-Kim Dong Hoon 
-Terry McKinley
-Walter Bell
-Clinton Linck
-Josep Clodas Sola 
-Thierry Martin
-Peter Mauro 
-Mitchell Brenner
-Yak
-Lluis Bullich Rañe 
-Steffen Rohr 
-Eric Jacquin
-Harvest Lane
-Ville Kuvaja
-DK-System
-Heinz Vogel
-Heung Jin Choi
-MMJS van der Helm 
-Dan Neelands
-Yashiro Masayuki
-Isaac Sloan
-Harold Baird
-Roy Bender
-Bradley Murchie
-Maximilian Süß
-Dean Jansa
-Ronald Donker
-Paul Oldenkamp
-Dietmar Drees
-Bradley Murchie
-Richard Fahie
-James Kaufman
-Henry Deucker
-Christian Fuchs
-Arold Reinders
-Robert Miller
-Mark Gaskievicz
-Roland Müller
-Frank Gewalt
-Remi Viard
-Reginald H Millsom
-Pierluigi Sommaruga
-A Harris
-Stefan Grunenberg 
-Francisco Gutierrez Muñoz
-Steve Coley
-Sean Cull
-Roberto Orsello
-David Finger
-Jean-Marie Oddo
-Mike Matheny
-Glen Roe (Showmaster)
-Arron Bates
-Tim Spurr
-Daniel Morgan
-Trent Ready
-Mark Maskiell
-Robert Crockford
-Mark Illum
-David McGuire
-Martyn Coles
-Jose Sobral
-Heung Jin Choi
-Tomasz Janiak
-Fabien Gagné
-Joe Street
-Micha Ronen
-Albert Blondin
-Klaus Schuebel
-Evening Shade Pottery
-Thomas Kilduff
-Sven Assmus
-Markus Eberl
-Nicholas Field
-Harald Wilczak
-John Grepps
-Anthony Burbidge
-Sherba Baine
-Gordon Evans
-Fred Figge
-Uwe Kuehn 
-David Beatty
-Aaron Stringer
-Alan J Wasserman
-Wolfgang Rauser
-Samuel Cook
-Friedrich Ipolt
-Barrington Cole 
-Charles Lakins
-Thos. O'Meara Photography
-Adam Chevalier
-Mike Mulligan
-Serge Michaux 
-Robert Young
-Wilco Hijink
-Roy Nixon
-Lexington S Morley
-Daryl Dacko
-Beat Zurflueh
-Piotr Kundu
-Kevin Berkefeld
-Tomasz Klys
-Mirco Didone'
-Christoph Schroeter
-Zdenek Trojanek
-Bryan Anderson
-Kamco Enterprises 
-Robert Bates
-Robert Brown  
-Dennis Marinus
-Ronald Van Putte
-Thomas Kvitle Jenssen
-Patrick Tuxbury 
-Istvan Magi
-Sasaki Satoru
-David Laburthe
-Vit Jelinek
-Pablo Gomez Martinez
-Alan Thoren
-Jack Clodfelter
-William Simon
-James Houck
-Peter Fithern
-Thomas Svedman
-TechFixPros
-Rafael Eric Suarez Nordlow
-Colin Rycroft
-Emanuel Stassar
-Michael Gregory
-Robert Russell
-Felix Kaiser
-Joshua Bardwell
-Davd Goodall
-Leonard MacKey
-Miles Kelly
-Sergio Robledo
-Mikael Wallbäck
-Daniel Malcman
-Paul Dittman
-Attilio Rausse
-Sidney Gates
-Andrea Montefusco
-Paul Luby
-Donald L Webster
-Kenneth Frehafer 
-Matthias Hase 
-Markus Wolf
-Andrew Fazio
-Stefan Künst
-Stephen Adams
-Tauno Rautakorpi
-Frank Houvenaghel
-George Neusse
-Andreja Rusjakovski
-Axel Stöckle
-Erwin Störrle
-Rodger Hopper
-Fernando Cesar
-Jonathan Gillis
-DK-System
-Lexington S Morley
-Bernd Koehler
-Davis RC
-Pete Johnson
-Patricia Martin
-Florian Tschacher
-Brian Spearing
-Craig Hall
-Joseph Case
-Harald Klein
-Robert Crockford
-Chris Boultinghouse
-Kitsew
-Georgios Papadopoulos
-Fourmost Products
-Dennis Miller
-Dave Matison
-Maximilian Radig
-Juan Rodriguez
-Robert Sessler
-John Murray
-Martin Sniedze
-David Poole
-Manfred Delakowitz
-Martijn Kruissen
-Jörgen Norman
-Nathan Kinney
-John Godden
-Larry Roper
-Mike Frizell
-Daniel Pospolita
-Peter Herz
-Don Mondrik
-Paul Fram
-Charles Knight
-Matthew Adams
-Kenneth Reed
-Gary Wild
-Christof Ramm
-Bruno Bedard
-Salih Samim Aydin
-Alexander Pils
-Andrew Scerbina
-Donovan Bodishbaugh
-Ray Dunn
-Burt Pickard-Richardson
-Robert Ferguson
-CY Enterprise 
-Michel Stathakis Neto
-Beat Zurflueh
-Portstate Pty Ltd
-Jens Hoffmann
-Ricardo Santos
-Jean-Francois Le Breton
-Michael Deasy
-Anindya Mukerjee
-Emay Toha
-Kamco Enterprises
-Peter Mueller
-Giovanni Trentini
-Cecil Porter
-Robert Canavan
-Greg Higginbottom
-Tim Walker
-Spis Ltd/TurboNote
-Patricia Cox
-Matthew Lukes
-Sabine Witte
-Phillip Perry
-Beat Zurflueh
-Russell Stutzman
-Dietmar Drees
-Kenneth Ward
-Jens Lochmüller
-Anthony Witham
-Peter Hauke
-Arizona Action Photos
-Francis F Dale
-Willie Swanepoel
-Edward Hauser
-Adilson Oliveira
-Joseph Ordille
-Michael Shellim 
-Teddie Holmes
-Alexandre Rault
-Eric Albin
-Lukas Kliment
-Bernard Philippe
-Bernard Delpy
-Didier Klein
-Arnaldo Guedes
-Cyberauto Systems
-John Alsbrooks
-John Kearney
-Christopher Borden
-Marc Virgilio Ricci
-Frederick Davie
-Jürgen Enders
-Terrence Pitts
-Thomas Sandner
-Marco Coltorti
-Harald Wilczak
-Rodney Lorimor
-Richard Davis
-Stephen Palmer
-Michael Napolitan
-Joshua Bardwell
-Fred Dawson
-Jim Wagner
-Peter Johnson
-Fredrik Lewerth
-Arvin Stenersen
-Daniel Morgan
-Roy Nixon
-Joachim Blunck
-Karl-Heinz Gansel
-Monrovia Mountain Enterprises
-Alessandro Villa
-Jan-Åke Nilsson
-Matthias Rei
-DVR Solutions BV
-Bertrand Condevaux Lanloy
-Henri Mirra
-Aurélien Planiol
-Kevin Caldwell
-Andrew Garello
-Tomasz Maziarz
-Russell Flack
-Fernando Rimoldi
-Greg Reid
-Dietmar Drees
-Holger Landwehr
-Arno Loehdorf
-Boon Sripattha
-Patrik Åkerfeldt
-Alonzo Fretwell
-Renjith Chandrasekharan
-Ruben Gomez Hernandez
-Michael Gardner
-Judith Green
-Timo Ruppell
-John Lipscomb
-Norbert Wenke
-Erik Frieberg
-Raimo Ruotsalainen
-Brian Harris
-Sebastian Blüml 
-Efisio Maxia
-Jeff Theobald
-Anthony Rizzo
-Rodney Huddleston
-Dietmar Drees
-Jürgen Monden
-David Morgan
-Andrew Fernie
-Donald Burke
-Ronald Donker
-Fredie Singh
-Patrizio Simoncini
-Harald Gabler
-Michael Brown
-Julien Gérard
-Alexandre d'Alton
-Peter Mergaerts
-Jan Houwers
-Christian Grandjean
-Roger Bergevin
-NorthSide
-Sigmund Martinsen
-Lionel Lafraise
-Gisli Ofeigsson 
-The Gruvin9x Project
-Manuel McLure
-Fernando Rimoldi
-Hiltenkamp Stephan
-Sandeep Kishore Jain
-Greg Parker 
-Norman Maaß
-Adriano Del Ben
-Justin Poole
-Kenneth Harrison
-Eugene LaFaille
-John O'Shaughnessy
-Uwe Jordt
-Stuart Olson
-Frédéric Devillard
-Cheung Leo
-Peter Webster
-Jean-Claude Bachetta
-Delfin Perena
-Sae-wook Yoon
-Focus on Excellence
-Jeffery Golias
-Nick Milton
-Paul Zasso
-Reidar Johannes Lillebotn
-Handley William
-Luke Williams
-Michael Shellim
-Brian Spearing
-Derek Foster
-Pasi Pitkänen
-Lexington S Morley
-Jeff Roberson
-Volkov Victor
-Bryan Anderson
-Daniel Garber
-Pavel Stein 
-Ravi Gupta
-Patrick Tuxbury
-Mark Deverell
-John Capell 
-Neil McVean
-Matthew Elyash
-Kerry Cochrell
-Willem Aandewiel 
-Reg Bell
-Jean Chenoz
-Philippe Grand
-Tauno Rautakorpi
-Jeff Dillingham
-Brad Kelley
-Shaun Currier
-Danilo Schiara
-John Hennig
-RK Custom Homes
-James Houck
-Piet Teekens
-Tommy Widenflycht
-Johan Petrus Theophilus
-Maria van Melis
-Ralph Gustafson
-Paul Luby
-Andrew Duncan
-Stephen Crowther
-Edward Glover
-Kelly Byrd
-Brad Curtis
-Wolfgang Kuhl
-John Beidl
-Roy Nixon
-Glen Roe
-CY Enterprise
-Evening Shade Pottery
-Gilles Dando
-Patrick Richard
-Justin Altemeier
-Constant Dupuis
-Tony Kenward
-Pierre Rondel
-Ernest Luguera Sanchez
-Adam Brackney
-Joe Baker
-单 雷平
-Ben Fay
-Chris Monk
-Stan von Miller
-Christian Krebs
-Michel Motte
-Graziano Rampinelli
-Joe Baker
-Jean-Philippe Laurent
-Romain Rouzaud
-Michel Garbarino
-Henri Mirra
-Otto Fröhlich
-Thomas Cramer
-Anthony Trombetta
-Fernando Rimoldi
-Dietmar Drees
-Michal Kowalski
-Ivan Correa
-Modellbau
-Massimo Luigi Stara
-Graham Baldwin
-Tomasz Rejman
-Wolfgang Lang
-John Greenwood
-Till von Reumont
-Paul Pereira Brunner 
-Donald L Singer
-Junsun Lee
-Guy Lamaison
-Erwin Dulken
-Mike H Dailey
-Jon Cammarata
-Martin Krueger
-Adolfo Perogio
-Sylvain Techer
-Wes Warner
-Kevin Caldwell
-Ali Ersan Gur
-Hans-Rudolf Riniker
-Sébastien Boutard
-Jean Chessé 
-Mike H Dailey 
-Don Polk
-Roberto Orsello
-Borovikov Dmitriy
-John Lipscomb
-Peter Glassey
-Joseph Kramer
-F.Javier Martinez Velasco
-Claudio Piccinini
-John Jackson
-John Beech
-Rene TraaJohn Jackson
-Sebastien Charpentier (monthly)
-Nigel Hendriks
-Frédéric Devillard
-Albert Herzog
-Anindya Mukerjee
-Kenny Stanberry
-Tauno Rautakorpi
-Mathias Krapp
-Fernando Rimoldi
-Wolfgang Rauser
-Richard Shagam
-Stephen Bailey
-DK-System
-Casa Kuxtal
-Christopher Potts
-Douglas George
-Michael Banks
-Jon Wiltshire
-David Green
-Guy Willems
-Xavier Mestelan Pinon
-Maik Gottschalk 
-Scott Sparks
-John Dunning
-RAD51
-Ron Powell 
-Alain Labonne
-Carol Sills
-Franck Aßmann
-Larry Anderson
-Mikael Wallbäck
-Wes Warner
-Christoffer H Henni
-Donna Bayer
-Garry Ogilvie
-Karlheinz Sirsch
-Fred Larssen
-Rob Coppock 
-Franz Josef Hahn
-Serge Ribault
-Tanguy Le Moign
-Barrett Powell
-Patrice Lafeuille
-Martin Blume
-Marek Kopyto
-Marco Lange
-Gary Nix
-Jack Oliphant
-John Lever 
-Adolphe Montefiore
-Steven De Weerdt
-Håkan Berggen
-Ayelet Egosi
-Jean-Frederic Gaudreault
-Jim Wagner
-Lee Scott
-Roger Keatley
-Sherman Lovell
-Hugh Caldwell
-JB Fisher Company
-Michels Bernhard 
-Pietro Rossin
-Carsten Wache
-Brock White 
-Steven Poretz
-David Huelster
-Gordon Stahl (monthly)
-John Mathison
-Richard Duczmal
-Gregory Barron
-Marcel Fischer
-Klas Mälman
-Viljo Liukku
-Eric Smith
-Sven Assmus
-Luke Mole
-NorthSide
-Hannes Mössler 
-James Kaufman
-Ravi Gupta
-Lexington S Morley
-Ralph Segar 
-Frédéric Devillard
-Cory Theurer
-Valentinos Zachariou
-Garrett Paquette 
-Heung Jin Choi
-Kerry Cochrell
-Doug Miller
-Andrzej Weydmann
-Chair-man.nl
-Eric Beier	
-Jay Warren
-Marian Matej 
-Alastair Smith
-Timothy Senecal
-Dietmar Drees
-Bruce Jones
-Adil Busaidy
-Herman Hofman
-Jean Paul Michel
-Peter McHenry
-Julien lecoquierre
-Jean-Marie Clay
-Robert Nicoll
-Dan Nixon
-Ewald Moehring
-Giovanni Carnesecchi 
-Paul Dumsday
-Tadeusz Adamowski
-Andrew Newton
-Neil Horne
-Kerstin Appelqvist

Dockerfile

@@ -0,0 +1,46 @@
+# Dockerfile
+FROM archlinux:base
+RUN pacman -Syu --noconfirm
+
+# Install misc packages
+RUN pacman -S --noconfirm \
+    7zip \
+	arm-none-eabi-gcc \
+	arm-none-eabi-newlib \
+	base-devel \
+	bc \
+	cmake \
+	cpio \
+	curl \
+	dos2unix \
+	erofs-utils \
+	git \
+	less \
+	nano \
+	python \
+	python-pip \
+	python-pilkit \
+	screen \
+	tree \
+	unzip \
+	vim \
+	wget \
+	zip
+
+# HACK: Allow base-devel to run with root user
+RUN sed -i '/E_ROOT/d' /usr/bin/makepkg
+
+# Install yay
+RUN git clone https://aur.archlinux.org/yay-bin.git /tmp/yay-bin && \
+    cd /tmp/yay-bin && \
+	makepkg -si --noconfirm && \
+	cd && rm -rf /tmp/yay-bin
+
+#RUN git clone --recursive https://github.com/STMicroelectronics/STM32CubeG0.git /workspace/STM32CubeG0
+#RUN git clone --recursive https://github.com/STMicroelectronics/STM32CubeG4.git /workspace/STM32CubeG4
+
+# Personal dir dotfiles
+#ADD home /home/
+
+# Personal uploader scripts
+#ADD root/bin /usr/local/bin/

README.md

@@ -1,9 +1,59 @@
-##OpenTX 2.2 Branch
+[![Release](https://img.shields.io/github/v/release/OpenI6X/opentx?include_prereleases)](https://github.com/OpenI6X/opentx/releases/latest)
+[![GitHub all releases](https://img.shields.io/github/downloads/OpenI6X/opentx/total)](https://github.com/OpenI6X/opentx/releases)
+[![GitHub license](https://img.shields.io/github/license/OpenI6X/opentx)](https://github.com/openi6x/opentx/blob/master/LICENSE)
+![OpenI6X](https://circleci.com/gh/OpenI6X/opentx.svg?style=shield)
+[![Gitpod ready-to-code](https://img.shields.io/badge/Gitpod-ready--to--code-blue?logo=gitpod)](https://gitpod.io/#https://github.com/openi6x/opentx/tree/master)
+[![Discord](https://img.shields.io/discord/973289741862727741.svg?label=&logo=discord&logoColor=ffffff&color=7389D8&labelColor=6A7EC2)](https://discord.gg/3vKfYNTVa2)
 
-[![Build Status](https://travis-ci.org/opentx/opentx.svg?branch=next)](https://travis-ci.org/opentx/opentx)
-[![Join the chat at https://opentx.rocket.chat](https://camo.githubusercontent.com/3d659054abd6ce21c0e47cf3b83a51bda69ca282/68747470733a2f2f64656d6f2e726f636b65742e636861742f696d616765732f6a6f696e2d636861742e737667)](https://opentx.rocket.chat)
-[![Donate using Paypal](https://img.shields.io/badge/paypal-donate-yellow.svg)](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=DJ9MASSKVW8WN)
+![Banner](https://github.com/OpenI6X/opentx/blob/master/doc/flysky/banner.png?raw=true)
 
-The ongoing development on 2.2.x is done in this branch.
+# Custom OpenTX / EdgeTX for Flysky FS-i6X
 
-Refer to the opentx.wiki for information about setting up the tool chains for building OpenTX and OpenTX Companion as well as other development related issues.
+Join our [Discord](https://discord.gg/3vKfYNTVa2), [RCGroups](https://www.rcgroups.com/forums/showthread.php?3916435-FlySky-I6X-port-of-OpenTX) or [Telegram](https://t.me/otx_flysky_i6x) to contribute, discuss or get help.<br> 
+
+## Instructions
+
+- [FlySky i6X user interface](https://github.com/OpenI6X/opentx/wiki/Manual) and other differences to official EdgeTX/OpenTX devices.<br>
+- [EdgeTX manual](https://manual.edgetx.org/bw-radios)
+- [How to install, upgrade or restore firmware](https://github.com/OpenI6X/opentx/wiki/Flashing-&-Upgrading)<br>
+- [Developers guide, how to build](https://github.com/OpenI6X/opentx/wiki/Development)<br>
+- [Modifications](https://github.com/OpenI6X/opentx/wiki/Modifications)<br>
+
+## Comparison
+
+| Feature                   | FlySky i6X | OpenI6X                      |
+|---------------------------|------------|------------------------------|
+| Channels                  | 6/10       | 16                           |
+| Mixers                    | 3          | 32                           |
+| Models                    | 20         | 20 / unlimited<sup>[1]</sup> |
+| Protocols                 | AFHDS, AFHDS2A, PPM | AFHDS2A + 16Ch modes, PPM, CRSF |
+| Trainer                   | PPM        | PPM, SBUS                    |
+| Timers                    | _          | ✓                            |
+| Voice annoucements        | _          | ✓<sup>[2]</sup>              |
+| Variometer                | _          | ✓                            |
+| ExpressLRS ready          | _          | ✓ Configurator built-in (no need for LUA) |
+| Adjustable screen brightness | _       | ✓<sup>[3]</sup>              |
+| USB Modes                 | Joystick   | Joystick, Storage, Serial (Telemetry mirror, Debug) |
+| AUX Serial port           | _          | ✓ SBUS Trainer, Telemetry mirror, Debug |
+| FlySky FS-HZCZ03-ADJ Gimbal support | _   | ✓<sup>[4]</sup>    |
+| Languages                 | EN, CN      | PL, EN, CZ, DE, ES, FI, FR, IT, NL, PT, SE |
+
+<sub>[1] Unlimited by using USB mass storage mode eeprom backup/restore.</sub><br>
+<sub>[2] By adding DFPlayer, see [instructions](https://github.com/OpenI6X/opentx/wiki/Modifications#dfplayer) in wiki.</sub><br>
+<sub>[3] By wiring 2 pads, see [instructions](https://github.com/OpenI6X/opentx/wiki/Modifications#adjustable-backlight-level) in wiki.</sub><br>
+<sub>[4] See [instructions](https://github.com/OpenI6X/opentx/wiki/Modifications#flysky-fs-hzcz03-adj-gimbal) in wiki.</sub>
+  
+## Credits
+
+* Janek ([ajjjjjjjj](https://github.com/ajjjjjjjj)), continues Kuba's and Mariano's work, added sound, USB, ExpressLRS V2/V3 configuration, telemetry mirror, SBUS trainer, new/fixed drivers, ports, bugfixes.
+* Mariano ([marianomd](https://github.com/marianomd)), continued Kuba's work and made it up to useable condition! Added gimbals, buttons, AFHDS2A, PPM, CRSF.
+* Kuba ([qba667](https://github.com/qba667)), started this work and made this project possible, it is forked from his repo.
+* Wilhelm ([wimalopaan](https://github.com/wimalopaan)) added 16 channels SBUS16 / IBUS16 modes.
+* Rafael ([rafolg](https://github.com/rafolg)), ported FlySky Hall Gimbal support from EdgeTX.
+* Tom ([tmcadam](https://github.com/tmcadam)) fixed AFHDS2A PWM mode selection.
+* The internal RF code was taken from the great KotelloRC's [erfly6: Er9X for i6 and i6x](https://bitbucket.org/KotelloRC/erfly6/src/master/).
+* Some of the internal RF fixes are a result of analysing [pascallanger's](https://github.com/pascallanger) [DIY-Multiprotocol-TX-Module](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module).
+* ExpressLRS configurator is based on elrsV2/V3.lua from [ExpressLRS](https://github.com/ExpressLRS/ExpressLRS).
+* Some of the ports are from [EdgeTX](https://github.com/EdgeTX/edgetx/).
+* ADC code taken from [OpenGround](https://github.com/fishpepper/OpenGround).
+* All the contributors of [OpenTX](https://github.com/opentx/opentx/). 

cmake/Bitmaps.cmake

@@ -6,7 +6,7 @@ macro(add_bitmaps_target targetname filter width format)
     set(target ${target}.lbm)
     add_custom_command(
       OUTPUT ${target}
-      COMMAND python ${RADIO_DIRECTORY}/util/img2lbm.py ${bitmap} ${target} ${width} ${format} ${ARGN}
+      COMMAND ${PYTHON_EXECUTABLE} ${RADIO_DIRECTORY}/util/img2lbm.py ${bitmap} ${target} ${width} ${format} ${ARGN}
       DEPENDS ${bitmap}
     )
     list(APPEND bitmaps_files ${target})
@@ -14,11 +14,11 @@ macro(add_bitmaps_target targetname filter width format)
   add_custom_target(${targetname} DEPENDS ${bitmaps_files})
 endmacro(add_bitmaps_target)
 
-macro(add_truetype_font_target radio name font size bold)
+macro(add_truetype_font_target radio name font size offset)
   set(target ${RADIO_SRC_DIRECTORY}/fonts/${radio}/font_${name})
   add_custom_target(ttf_${radio}_${name}
-    COMMAND ${RADIO_DIRECTORY}/util/font2png.py ${font} ${size} ${bold} ${target}
+    COMMAND ${PYTHON_EXECUTABLE} ${RADIO_DIRECTORY}/util/font2png.py ${font} ${size} ${offset} ${target}
     WORKING_DIRECTORY ${RADIO_SRC_DIRECTORY}
   )
   set(ttf_${radio}_fonts_targets ${ttf_${radio}_fonts_targets} ttf_${radio}_${name})
-endmacro(add_truetype_font_target)
+endmacro(add_truetype_font_target)

cmake/FindLupdate.cmake

@@ -1,19 +0,0 @@
-# Locate lupdate binary from QT
-
-# This module defines
-# LUPDATE_EXECUTABLE, where is QT lupdate
-# LUPDATE_FOUND, if false, don't try to use lupdate
-
-FIND_PROGRAM( LUPDATE_EXECUTABLE
-  NAMES
-    lupdate lupdate-qt4
-)
-
-MESSAGE( STATUS ${LUPDATE_EXECUTABLE} )
-
-# if the program is found then we have it
-IF( LUPDATE_EXECUTABLE )
-  SET( LUPDATE_FOUND "YES" )
-ENDIF( LUPDATE_EXECUTABLE )
-
-MARK_AS_ADVANCED( LUPDATE_EXECUTABLE )

cmake/FindSDL.cmake

@@ -0,0 +1,256 @@
+#.rst:
+# FindSDL
+# -------
+#
+# Locate SDL library
+#
+# This module defines
+#
+# ::
+#
+#   SDL_FOUND, if false, do not try to link to SDL
+#   SDL_LIBRARY, the name(s) of the library(ies) to link against
+#   SDL_LIBSDL, the full path and name of libSDL (or SDL.[lib|dll].
+#   SDL_LIBSDLMAIN, full path and name of libSDLmain (or SDLmain.lib).
+#   SDL_LIBRARY_PATH, the full path to the found libSDL
+#   SDL_INCLUDE_DIR, where to find SDL.h
+#   SDL_VERSION_STRING, human-readable string containing the version of SDL
+#
+#
+#
+# This module responds to the flag:
+#
+# ::
+#
+#   SDL_BUILDING_LIBRARY
+#     If this is defined, then no SDL_main will be linked in because
+#     only applications need main().
+#     Otherwise, it is assumed you are building an application and this
+#     module will attempt to locate and set the proper link flags
+#     as part of the returned SDL_LIBRARY variable.
+#
+#
+#
+# Don't forget to include SDLmain.h and SDLmain.m your project for the
+# OS X framework based version.  (Other versions link to -lSDLmain which
+# this module will try to find on your behalf.) Also for OS X, this
+# module will automatically add the -framework Cocoa on your behalf.
+#
+#
+#
+# Additional Note: If you see an empty SDL_LIBSDL in your
+# configuration and no SDL_LIBRARY, it means CMake did not find your SDL
+# library (SDL.dll, libsdl.so, SDL.framework, etc).  Set
+# SDL_LIBSDL to point to your SDL library, and configure again.
+# Similarly, if you see an empty SDL_LIBSDLMAIN, you should set this
+# value as appropriate.  These values are used to generate the final
+# SDL_LIBRARY variable, but when these values are unset, SDL_LIBRARY
+# does not get created.
+#
+#
+#
+# $SDLDIR is an environment variable that would correspond to the
+# ./configure --prefix=$SDLDIR used in building SDL.  l.e.galup 9-20-02
+#
+# Modified by Eric Wing.  Added code to assist with automated building
+# by using environmental variables and providing a more
+# controlled/consistent search behavior.  Added new modifications to
+# recognize OS X frameworks and additional Unix paths (FreeBSD, etc).
+# Also corrected the header search path to follow "proper" SDL
+# guidelines.  Added a search for SDLmain which is needed by some
+# platforms.  Added a search for threads which is needed by some
+# platforms.  Added needed compile switches for MinGW.
+#
+# On OSX, this will prefer the Framework version (if found) over others.
+# People will have to manually change the cache values of SDL_LIBRARY to
+# override this selection or set the CMake environment
+# CMAKE_INCLUDE_PATH to modify the search paths.
+#
+# Note that the header path has changed from SDL/SDL.h to just SDL.h
+# This needed to change because "proper" SDL convention is #include
+# "SDL.h", not <SDL/SDL.h>.  This is done for portability reasons
+# because not all systems place things in SDL/ (see FreeBSD).
+
+#
+# Modified for OpenTx by Maxim Paperno 19-Dec-2016
+# Added SDL_LIBSDL, SDL_LIBSDLMAIN & SDL_LIBRARY_PATH, removed SDLMAIN_LIBRARY,
+#  SDL_LIBRARY_TEMP, and fixed bug with recursive appending of supporting 
+#  libraries to cached SDL_LIBRARY_TEMP variable.
+#
+
+#=============================================================================
+#CMake - Cross Platform Makefile Generator
+#Copyright 2000-2015 Kitware, Inc.
+#Copyright 2000-2011 Insight Software Consortium
+#All rights reserved.
+#
+#Redistribution and use in source and binary forms, with or without
+#modification, are permitted provided that the following conditions
+#are met:
+#
+#* Redistributions of source code must retain the above copyright
+#  notice, this list of conditions and the following disclaimer.
+#
+#* Redistributions in binary form must reproduce the above copyright
+#  notice, this list of conditions and the following disclaimer in the
+#  documentation and/or other materials provided with the distribution.
+#
+#* Neither the names of Kitware, Inc., the Insight Software Consortium,
+#  nor the names of their contributors may be used to endorse or promote
+#  products derived from this software without specific prior written
+#  permission.
+#
+#THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#------------------------------------------------------------------------------
+#
+#The above copyright and license notice applies to distributions of
+#CMake in source and binary form.  Some source files contain additional
+#notices of original copyright by their contributors; see each source
+#for details.  Third-party software packages supplied with CMake under
+#compatible licenses provide their own copyright notices documented in
+#corresponding subdirectories.
+#
+#------------------------------------------------------------------------------
+#
+#CMake was initially developed by Kitware with the following sponsorship:
+#
+# * National Library of Medicine at the National Institutes of Health
+#   as part of the Insight Segmentation and Registration Toolkit (ITK).
+#
+# * US National Labs (Los Alamos, Livermore, Sandia) ASC Parallel
+#   Visualization Initiative.
+#
+# * National Alliance for Medical Image Computing (NAMIC) is funded by the
+#   National Institutes of Health through the NIH Roadmap for Medical Research,
+#   Grant U54 EB005149.
+#
+# * Kitware, Inc.
+#=============================================================================
+
+
+find_path(SDL_INCLUDE_DIR SDL.h
+  HINTS
+    ENV SDLDIR
+  PATH_SUFFIXES SDL SDL12 SDL11
+                # path suffixes to search inside ENV{SDLDIR}
+                include/SDL include/SDL12 include/SDL11 include
+)
+
+if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+  set(VC_LIB_PATH_SUFFIX lib/x64)
+else()
+  set(VC_LIB_PATH_SUFFIX lib/x86)
+endif()
+
+# SDL-1.1 is the name used by FreeBSD ports...
+# don't confuse it for the version number.
+find_library(SDL_LIBSDL
+  NAMES SDL SDL-1.1
+  HINTS
+    ENV SDLDIR
+  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
+)
+
+# Non-OS X framework versions expect you to also dynamically link to
+# SDLmain. This is mainly for Windows and OS X. Other (Unix) platforms
+# seem to provide SDLmain for compatibility even though they don't
+# necessarily need it.
+find_library(SDL_LIBSDLMAIN
+  NAMES SDLmain SDLmain-1.1
+  HINTS
+    ENV SDLDIR
+  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
+  PATHS
+  /sw
+  /opt/local
+  /opt/csw
+  /opt
+)
+
+# SDL may require threads on your system.
+# The Apple build may not need an explicit flag because one of the
+# frameworks may already provide it.
+# But for non-OSX systems, I will use the CMake Threads package.
+if(NOT APPLE)
+  find_package(Threads)
+endif()
+
+# MinGW needs an additional library, mwindows
+# It's total link flags should look like -lmingw32 -lSDLmain -lSDL
+if(MINGW)
+  set(MINGW32_LIBRARY mingw32 CACHE STRING "mwindows for MinGW")
+endif()
+
+if(SDL_LIBSDL)
+  # For SDLmain
+  if(SDL_LIBSDLMAIN AND NOT SDL_BUILDING_LIBRARY AND NOT SDL_INCLUDE_DIR MATCHES ".framework")
+    list(FIND SDL_LIBSDL "${SDL_LIBSDLMAIN}" _SDL_MAIN_INDEX)
+    if(_SDL_MAIN_INDEX EQUAL -1)
+      list(APPEND _SDL_LIBRARY_TEMP "${SDL_LIBSDLMAIN}")
+    endif()
+    unset(_SDL_MAIN_INDEX)
+  endif()
+
+  list(APPEND _SDL_LIBRARY_TEMP "${SDL_LIBSDL}")
+
+  # For OS X, SDL uses Cocoa as a backend so it must link to Cocoa.
+  # CMake doesn't display the -framework Cocoa string in the UI even
+  # though it actually is there if I modify a pre-used variable.
+  # I think it has something to do with the CACHE STRING.
+  # So I use a temporary variable until the end so I can set the
+  # "real" variable in one-shot.
+  if(APPLE)
+    list(APPEND _SDL_LIBRARY_TEMP "-framework Cocoa")
+  endif()
+
+  if(Threads_FOUND)
+    list(APPEND _SDL_LIBRARY_TEMP ${CMAKE_THREAD_LIBS_INIT})
+  endif()
+
+  # MinGW needs an additional library, mwindows
+  # It's total link flags should look like -lmingw32 -lSDLmain -lSDL
+  if(MINGW)
+    list(INSERT 0 _SDL_LIBRARY_TEMP mingw32)
+  endif()
+
+  # Set the final string here so the GUI reflects the final state.
+  set(SDL_LIBRARY ${_SDL_LIBRARY_TEMP} CACHE STRING "Full list of required SDL & supporting libraries.")
+  unset(_SDL_LIBRARY_TEMP)
+
+  get_filename_component(_SDL_LIBRARY_TEMP ${SDL_LIBSDL} PATH)
+  set(SDL_LIBRARY_PATH ${_SDL_LIBRARY_TEMP} CACHE PATH "Path to SDL library.")
+  unset(_SDL_LIBRARY_TEMP)
+endif()
+
+if(SDL_INCLUDE_DIR AND EXISTS "${SDL_INCLUDE_DIR}/SDL_version.h")
+  file(STRINGS "${SDL_INCLUDE_DIR}/SDL_version.h" SDL_VERSION_MAJOR_LINE REGEX "^#define[ \t]+SDL_MAJOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_INCLUDE_DIR}/SDL_version.h" SDL_VERSION_MINOR_LINE REGEX "^#define[ \t]+SDL_MINOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_INCLUDE_DIR}/SDL_version.h" SDL_VERSION_PATCH_LINE REGEX "^#define[ \t]+SDL_PATCHLEVEL[ \t]+[0-9]+$")
+  string(REGEX REPLACE "^#define[ \t]+SDL_MAJOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_VERSION_MAJOR "${SDL_VERSION_MAJOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_MINOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_VERSION_MINOR "${SDL_VERSION_MINOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_PATCHLEVEL[ \t]+([0-9]+)$" "\\1" SDL_VERSION_PATCH "${SDL_VERSION_PATCH_LINE}")
+  set(SDL_VERSION_STRING ${SDL_VERSION_MAJOR}.${SDL_VERSION_MINOR}.${SDL_VERSION_PATCH})
+  unset(SDL_VERSION_MAJOR_LINE)
+  unset(SDL_VERSION_MINOR_LINE)
+  unset(SDL_VERSION_PATCH_LINE)
+  unset(SDL_VERSION_MAJOR)
+  unset(SDL_VERSION_MINOR)
+  unset(SDL_VERSION_PATCH)
+endif()
+
+include(FindPackageHandleStandardArgs)
+
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL
+                                  REQUIRED_VARS SDL_LIBRARY SDL_LIBRARY_PATH SDL_INCLUDE_DIR
+                                  VERSION_VAR SDL_VERSION_STRING)

cmake/FindSdl.cmake

@@ -1,159 +0,0 @@
-# - Locate the SDL library
-# This module defines
-#  SDL_LIBRARY, the library to link against
-#  SDL_FOUND, if false, do not try to link to SDL
-#  SDL_INCLUDE_DIR, where to find SDL.h
-#
-# Don't forget to include SDLmain.h and SDLmain.m your project for the
-# OS X framework based version. (Other versions link to -lSDLmain which
-# this module will try to find on your behalf.) Also for OS X, this
-# module will automatically add the -framework Cocoa on your behalf.
-# $SDLDIR is an environment variable that would
-# correspond to the ./configure --prefix=$SDLDIR
-# used in building SDL.
-# l.e.galup  9-20-02
-#
-# Modified by Eric Wing.
-# Added new modifications to recognize OS X frameworks and
-# additional Unix paths (FreeBSD, etc).
-# Also corrected the header search path to follow "proper" SDL guidelines.
-# Added a search for SDLmain which is needed by some platforms.
-# Added a search for threads which is needed by some platforms.
-# Added needed compile switches for MinGW.
-#
-# On OSX, this will prefer the Framework version (if found) over others.
-# People will have to manually change the cache values of
-# SDL_LIBRARY to override this selection.
-#
-# Note that the header path has changed from SDL/SDL.h to just SDL.h
-# This needed to change because "proper" SDL convention
-# is #include "SDL.h", not <SDL/SDL.h>. This is done for portability
-# reasons because not all systems place things in SDL/ (see FreeBSD).
-FIND_PATH(SDL_INCLUDE_DIR SDL.h
-  $ENV{SDLDIR}/include
-  ~/Library/Frameworks/SDL.framework/Headers
-  /Library/Frameworks/SDL.framework/Headers
-  /usr/local/include/SDL
-  /usr/include/SDL
-  /usr/local/include/SDL12
-  /usr/local/include/SDL11 # FreeBSD ports
-  /usr/include/SDL12
-  /usr/include/SDL11
-  /usr/local/include
-  /usr/include
-  /sw/include/SDL # Fink
-  /sw/include
-  /opt/local/include/SDL # DarwinPorts
-  /opt/local/include
-  /opt/csw/include/SDL # Blastwave
-  /opt/csw/include
-  /opt/include/SDL
-  /opt/include
-  C:/Programs/SDL/include
-  )
-# I'm not sure if I should do a special casing for Apple. It is
-# unlikely that other Unix systems will find the framework path.
-# But if they do ([Next|Open|GNU]Step?),
-# do they want the -framework option also?
-IF(${SDL_INCLUDE_DIR} MATCHES ".framework")
-  # The Cocoa framework must be linked into SDL because SDL is Cocoa based.
-  # Remember that the OS X framework version expects you to drop in
-  # SDLmain.h and SDLmain.m directly into your project.
-  # (Cocoa link moved to bottom of this script.)
-  # SET (SDL_LIBRARY "-framework SDL -framework Cocoa" CACHE STRING "SDL framework for OSX")
-  # SET(SDL_LIBRARY "-framework SDL" CACHE STRING "SDL framework for OSX")
-  # Extract the path the framework resides in so we can use it for the -F flag
-  STRING(REGEX REPLACE "(.*)/.*\\.framework/.*" "\\1" SDL_FRAMEWORK_PATH_TEMP ${SDL_INCLUDE_DIR})
-  IF("${SDL_FRAMEWORK_PATH_TEMP}" STREQUAL "/Library/Frameworks"
-      OR "${SDL_FRAMEWORK_PATH_TEMP}" STREQUAL "/System/Library/Frameworks"
-      )
-    # String is in default search path, don't need to use -F
-    SET(SDL_LIBRARY_TEMP "-framework SDL")
-  ELSE("${SDL_FRAMEWORK_PATH_TEMP}" STREQUAL "/Library/Frameworks"
-      OR "${SDL_FRAMEWORK_PATH_TEMP}" STREQUAL "/System/Library/Frameworks"
-      )
-    # String is not /Library/Frameworks, need to use -F
-    SET(SDL_LIBRARY_TEMP "-F${SDL_FRAMEWORK_PATH_TEMP} -framework SDL")
-  ENDIF("${SDL_FRAMEWORK_PATH_TEMP}" STREQUAL "/Library/Frameworks"
-    OR "${SDL_FRAMEWORK_PATH_TEMP}" STREQUAL "/System/Library/Frameworks"
-    )
-  # Clear the temp variable so nobody can see it
-  SET(SDL_FRAMEWORK_PATH_TEMP "" CACHE INTERNAL "")
-
-ELSE(${SDL_INCLUDE_DIR} MATCHES ".framework")
-  # SDL-1.1 is the name used by FreeBSD ports...
-  # don't confuse it for the version number.
-  FIND_LIBRARY(SDL_LIBRARY_TEMP
-    NAMES SDL SDL-1.1
-    PATHS
-    $ENV{SDLDIR}/lib
-    /usr/local/lib
-    /usr/lib
-    /sw/lib
-    /opt/local/lib
-    /opt/csw/lib
-    /opt/lib
-    C:/Programs/SDL/lib/x86
-    )
-  # Non-OS X framework versions expect you to also dynamically link to
-  # SDLmain. This is mainly for Windows and OS X. Other platforms
-  # seem to provide SDLmain for compatibility even though they don't
-  # necessarily need it.
-  FIND_LIBRARY(SDLMAIN_LIBRARY
-    NAMES SDLmain SDLmain-1.1
-    PATHS
-    $ENV{SDLDIR}/lib
-    /usr/local/lib
-    /usr/lib
-    /sw/lib
-    /opt/local/lib
-    /opt/csw/lib
-    /opt/lib
-    )
-ENDIF(${SDL_INCLUDE_DIR} MATCHES ".framework")
-
-# SDL may require threads on your system.
-# The Apple build may not need an explicit flag because one of the
-# frameworks may already provide it.
-# But for non-OSX systems, I will use the CMake Threads package.
-IF(NOT APPLE)
-  FIND_PACKAGE(Threads)
-ENDIF(NOT APPLE)
-
-# MinGW needs an additional library, mwindows
-# It's total link flags should look like -lmingw32 -lSDLmain -lSDL -lmwindows
-# (Actually on second look, I think it only needs one of the m* libraries.)
-IF(MINGW)
-  SET(MINGW32_LIBRARY mingw32 CACHE STRING "mwindows for MinGW")
-ENDIF(MINGW)
-
-SET(SDL_FOUND "NO")
-IF(SDL_LIBRARY_TEMP)
-  # For SDLmain
-  IF(SDLMAIN_LIBRARY)
-    SET(SDL_LIBRARY_TEMP ${SDLMAIN_LIBRARY} ${SDL_LIBRARY_TEMP})
-  ENDIF(SDLMAIN_LIBRARY)
-
-  # For OS X, SDL uses Cocoa as a backend so it must link to Cocoa.
-  # CMake doesn't display the -framework Cocoa string in the UI even
-  # though it actually is there. I think it has something to do
-  # with the CACHE STRING. Maybe somebody else knows how to fix this.
-  # The problem is mainly cosmetic, and not a functional issue.
-  IF(APPLE)
-    SET(SDL_LIBRARY_TEMP ${SDL_LIBRARY_TEMP} "-framework Cocoa")
-  ENDIF(APPLE)
-
-  # For threads, as mentioned Apple doesn't need this.
-  # In fact, there seems to be a problem if Find the threads package
-  # and try using this line, so I'm just skipping it entirely for OS X.
-  IF(NOT APPLE)
-    SET(SDL_LIBRARY_TEMP ${SDL_LIBRARY_TEMP} ${CMAKE_THREAD_LIBS_INIT})
-  ENDIF(NOT APPLE)
-
-  # Set the final string here so the GUI reflects the final state.
-  SET(SDL_LIBRARY ${SDL_LIBRARY_TEMP} CACHE STRING "Where the SDL Library can be found")
-
-  SET(SDL_FOUND "YES")
-ENDIF(SDL_LIBRARY_TEMP)
-
-MARK_AS_ADVANCED(SDL_LIBRARY_TEMP)

cmake/FindXercesC.cmake

@@ -1,68 +1,68 @@
-# Find Xerces-C
-# The following setings are defined
-# XERCESC_ROOT_DIR, the root of the include and lib directory
-# XERCESC_INCLUDE_DIR, the full path of the include dir (ADVANCED)
-# XERCESC_LIBRARIES, the name of the xerces-c library (ADVANCED)
-
-# Look for a root installation
-IF( MSVC )
-SET( XERCES_WINDIR C:/Programs/xerces-vc )
-ELSE( )
-SET( XERCES_WINDIR C:/Programs/xerces )
-ENDIF( )
-
-FIND_PATH(XERCESC_ROOT_DIR include/xercesc/parsers/SAXParser.hpp
-  ${XERCES_WINDIR}
-  "C:/mingw/msys/1.0/local"
-  "C:/Program Files/CodeSynthesis XSD 3.2"
-  /usr
-  /usr/local
-  "C:/MinGW"
-  $ENV{CODESYNTH}
-  DOC "The root of an installed xerces-c installation"
-)
-
-# try to find the header
-FIND_PATH(XERCESC_INCLUDE_DIR xercesc/parsers/SAXParser.hpp
-  ${XERCESC_ROOT_DIR}/include
-  /usr/include
-  /usr/local/include
-)
-
-# Find the library
-FIND_LIBRARY(XERCESC_LIBRARY
-  NAMES xerces-c xerces-c_3
-  PATHS
-    ${XERCESC_ROOT_DIR}/lib
-    ${XERCESC_ROOT_DIR}/lib/vc-9.0
-    ${XERCESC_ROOT_DIR}/lib64/vc-9.0
-    /usr/lib
-    /usr/local/lib
-  DOC "The name of the xerces-c library"
-)
-
-IF (XERCESC_ROOT_DIR)
-  IF (XERCESC_INCLUDE_DIR AND XERCESC_LIBRARY)
-    SET (XERCESC_FOUND TRUE)
-    SET (XERCESC_LIBRARIES "${XERCESC_LIBRARY}")
-    # FIXME: There should be a better way of handling this?
-    # FIXME: How can we test to see if the lib dir isn't
-    # FIXME: one of the default dirs?
-    LINK_DIRECTORIES(${XERCESC_ROOT_DIR}/lib)
-  ENDIF (XERCESC_INCLUDE_DIR AND XERCESC_LIBRARY)
-ENDIF (XERCESC_ROOT_DIR)
-
-IF (XERCESC_FOUND)
-  IF (NOT XERCESC_FIND_QUIETLY)
-    MESSAGE (STATUS "  found xerces-c: ${XERCESC_LIBRARY}")
-  ENDIF (NOT XERCESC_FIND_QUIETLY)
-ELSE (XERCESC_FOUND)
-  IF (XERCESC_FIND_REQUIRED)
-    MESSAGE(FATAL_ERROR "Could not find Xerces-C")
-  ENDIF (XERCESC_FIND_REQUIRED)
-ENDIF (XERCESC_FOUND)
-
-MARK_AS_ADVANCED(
-  XERCESC_INCLUDE_DIR
-  XERCESC_LIBRARY
+# Find Xerces-C
+# The following setings are defined
+# XERCESC_ROOT_DIR, the root of the include and lib directory
+# XERCESC_INCLUDE_DIR, the full path of the include dir (ADVANCED)
+# XERCESC_LIBRARIES, the name of the xerces-c library (ADVANCED)
+
+# Look for a root installation
+IF( MSVC )
+SET( XERCES_WINDIR C:/Programs/xerces-vc )
+ELSE( )
+SET( XERCES_WINDIR C:/Programs/xerces )
+ENDIF( )
+
+FIND_PATH(XERCESC_ROOT_DIR include/xercesc/parsers/SAXParser.hpp
+  ${XERCES_WINDIR}
+  "C:/mingw/msys/1.0/local"
+  "C:/Program Files/CodeSynthesis XSD 3.2"
+  /usr
+  /usr/local
+  "C:/MinGW"
+  $ENV{CODESYNTH}
+  DOC "The root of an installed xerces-c installation"
+)
+
+# try to find the header
+FIND_PATH(XERCESC_INCLUDE_DIR xercesc/parsers/SAXParser.hpp
+  ${XERCESC_ROOT_DIR}/include
+  /usr/include
+  /usr/local/include
+)
+
+# Find the library
+FIND_LIBRARY(XERCESC_LIBRARY
+  NAMES xerces-c xerces-c_3
+  PATHS
+    ${XERCESC_ROOT_DIR}/lib
+    ${XERCESC_ROOT_DIR}/lib/vc-9.0
+    ${XERCESC_ROOT_DIR}/lib64/vc-9.0
+    /usr/lib
+    /usr/local/lib
+  DOC "The name of the xerces-c library"
+)
+
+IF (XERCESC_ROOT_DIR)
+  IF (XERCESC_INCLUDE_DIR AND XERCESC_LIBRARY)
+    SET (XERCESC_FOUND TRUE)
+    SET (XERCESC_LIBRARIES "${XERCESC_LIBRARY}")
+    # FIXME: There should be a better way of handling this?
+    # FIXME: How can we test to see if the lib dir isn't
+    # FIXME: one of the default dirs?
+    LINK_DIRECTORIES(${XERCESC_ROOT_DIR}/lib)
+  ENDIF (XERCESC_INCLUDE_DIR AND XERCESC_LIBRARY)
+ENDIF (XERCESC_ROOT_DIR)
+
+IF (XERCESC_FOUND)
+  IF (NOT XERCESC_FIND_QUIETLY)
+    MESSAGE (STATUS "  found xerces-c: ${XERCESC_LIBRARY}")
+  ENDIF (NOT XERCESC_FIND_QUIETLY)
+ELSE (XERCESC_FOUND)
+  IF (XERCESC_FIND_REQUIRED)
+    MESSAGE(FATAL_ERROR "Could not find Xerces-C")
+  ENDIF (XERCESC_FIND_REQUIRED)
+ENDIF (XERCESC_FOUND)
+
+MARK_AS_ADVANCED(
+  XERCESC_INCLUDE_DIR
+  XERCESC_LIBRARY
 )

cmake/Macros.cmake

@@ -1,14 +1,13 @@
 macro(today RESULT)
   if(WIN32)
     execute_process(COMMAND "cmd" " /C date /T" OUTPUT_VARIABLE ${RESULT})
-    string(REGEX REPLACE "(..)/(..)/(....).*" "\\1.\\2.\\3" ${RESULT} ${${RESULT}})
-    string(SUBSTRING ${${RESULT}} 0 10 ${RESULT})
+    string(REGEX REPLACE "[^0-9]*([0-9]+)[^0-9]([0-9]+)[^0-9]([0-9]+).*" "\\1-\\2-\\3" ${RESULT} ${${RESULT}})
   elseif(UNIX)
     execute_process(COMMAND "date" "+%Y-%m-%d" OUTPUT_VARIABLE ${RESULT})
     string(REGEX REPLACE "(....)-(..)-(..).*" "\\1-\\2-\\3" ${RESULT} ${${RESULT}})
   else(WIN32)
-    message(SEND_ERROR "date not implemented")
-    set(${RESULT} 00.00.0000)
+    message(WARNING "date not implemented")
+    set(${RESULT} 00-00-0000)
   endif(WIN32)
 endmacro(today)
 
@@ -20,20 +19,57 @@ macro(now RESULT)
     execute_process(COMMAND "date" "+%H:%M:%S" OUTPUT_VARIABLE ${RESULT})
     string(REGEX REPLACE "(..):(..):(..).*" "\\1:\\2:\\3" ${RESULT} ${${RESULT}})
   else(WIN32)
-    message(SEND_ERROR "time not implemented")
+    message(WARNING "time not implemented")
     set(${RESULT} 00:00:00)
   endif(WIN32)
 endmacro(now)
 
+find_package(Git)
+
 macro(git_id RESULT)
-  if(WIN32)
-    execute_process(COMMAND "cmd" " /C git --git-dir=${PROJECT_SOURCE_DIR}/.git rev-parse HEAD" OUTPUT_VARIABLE ${RESULT})
-    string(REGEX REPLACE "(.*)\n" "\\1" ${RESULT} ${${RESULT}})
-  elseif(UNIX)
-    execute_process(COMMAND "git" "--git-dir=${PROJECT_SOURCE_DIR}/.git" "rev-parse" "HEAD" OUTPUT_VARIABLE ${RESULT})
-    string(REGEX REPLACE "(.*)\n" "\\1" ${RESULT} ${${RESULT}})
-  else(WIN32)
-    message(SEND_ERROR "Git ID implemented")
-    set(${RESULT} 0)
-  endif(WIN32)
+  set(${RESULT} 0)
+  if (GIT_FOUND AND EXISTS "${PROJECT_SOURCE_DIR}/.git")
+    execute_process(COMMAND "${GIT_EXECUTABLE}" "--git-dir=${PROJECT_SOURCE_DIR}/.git" "rev-parse" "--short=8" "HEAD" OUTPUT_VARIABLE proc_out ERROR_VARIABLE proc_err)
+    if(proc_err)
+      message(WARNING "Git failed with error: ${proc_err}")
+    else()
+      string(REGEX REPLACE "(.*)\n" "\\1" ${RESULT} ${proc_out})
+    endif()
+  elseif(NOT GIT_FOUND)
+    message(WARNING "Git executable not found, revision number not available.")
+  else()
+    message(STATUS "Git repository not found, revision number not available.")
+  endif()
 endmacro(git_id)
+
+macro(use_cxx11)
+  if (CMAKE_VERSION VERSION_LESS "3.1" AND CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
+    set (CMAKE_CXX_FLAGS "--std=gnu++11 ${CMAKE_CXX_FLAGS}")
+  endif ()
+endmacro(use_cxx11)
+
+macro(PrintTargetReport targetName)
+  if(CMAKE_CXX_COMPILER MATCHES "/(clang-)?cl\\.exe$")
+    set(cpp_version ${CMAKE_CXX_COMPILER_VERSION})
+  else()
+    execute_process(COMMAND ${CMAKE_CXX_COMPILER} -dumpversion OUTPUT_VARIABLE cpp_version)
+  endif()
+  if(cpp_version)
+    string(STRIP "v${cpp_version}" cpp_version)
+  else()
+    set(cpp_version "WARNING: COMPILER NOT FOUND!")
+  endif()
+  message("TARGET ${targetName}: cpp compiler ${CMAKE_CXX_COMPILER} ${cpp_version}")
+
+  if(VERBOSE_CMAKELISTS)
+    get_directory_property(DirOpts COMPILE_OPTIONS)
+    get_directory_property(DirDefs COMPILE_DEFINITIONS)
+    string(REPLACE ";" " " DirOpts "${DirOpts}")
+    string(REPLACE ";" "; " DirDefs "${DirDefs}")
+    string(TOUPPER "${CMAKE_BUILD_TYPE}" build_type)
+    message("\twith cpp flags: ${CMAKE_CXX_FLAGS} ${CMAKE_CXX_FLAGS_${build_type}} ${DirOpts}")
+    message("\twith link flags: ${CMAKE_EXE_LINKER_FLAGS}")
+    message("\twith defs: ${DirDefs}")
+    message("--------------")
+  endif()
+endmacro(PrintTargetReport)

companion/releasenotes.txt

@@ -1,5 +1,78 @@
+<h2>Version 2.2.1 / 2017-12-17</h2>
+
+Please see <a href=http://www.open-tx.org/2017/12/16/opentx-2.2.1>this page</a> for details.
+
+<h2>Version 2.2.0 / 2017-05-30</h2>
+
+Major release! Please see <a href=http://www.open-tx.org/2017/05/30/opentx-2.2.0>this page</a> for details.
+
+<h2>Version 2.1.9 / 2016-09-14</h2>
+
+<ul>
+<li>SD sync fixes (<a href=https://github.com/opentx/opentx/issues/3351>#3351</a>)</li>
+<li>Fixed: Telemetry mode "FrSky D (cable)" choice was missing for Taranis (<a href=https://github.com/opentx/opentx/issues/3372>#3372</a>)</li>
+<li>Show persistent option only for calculated sensors (<a href=https://github.com/opentx/opentx/issues/3454>#3454</a>)</li>
+<li>Fixed Flight mode clear command (<a href=https://github.com/opentx/opentx/issues/3214>#3214</a>)</li>
+<li>Fixed a problem with Rotary encoders linked to flight mode (could freeze Companion) (<a href=https://github.com/opentx/opentx/issues/3459>#3459</a>, <a href=https://github.com/opentx/opentx/issues/3470>#3470</a>)</li>
+<li>Telemetry simulator improvements: added fuel quantity sensor, increased RPM range (<a href=https://github.com/opentx/opentx/issues/3505>#3505</a>, <a href=https://github.com/opentx/opentx/issues/3506>#3506</a>)</li>
+<li>Implemented minimal support for the DYI Multimodule (<a href=https://github.com/opentx/opentx/issues/3526>#3526</a>)</li>
+<li>Fixed: GVar combo-box not being refreshed when GV check-box (re-)selected (<a href=https://github.com/opentx/opentx/issues/3518>#3518</a>)</li>
+<li>Fixed: Heli inversion not correctly shown/saved from Companion on Radios without virtual inputs (<a href=https://github.com/opentx/opentx/issues/3510>#3510</a>)</li>
+<li>Implemented print functions for the Heli setup screen (<a href=https://github.com/opentx/opentx/issues/3554>#3554</a>)</li>
+<li>Fixed: Flight modes linked trims display value (<a href=https://github.com/opentx/opentx/issues/3547>#3547</a>, <a href=https://github.com/opentx/opentx/issues/3568>#3568</a>)</li>
+<li>Fixed: New model global variables and rotary encoders initialisation (<a href=https://github.com/opentx/opentx/issues/3473>#3473</a>)</li>
+<li>Fixed: Prevent circular linked global variables and rotary encoders (<a href=https://github.com/opentx/opentx/issues/3472>#3472</a>)</li>
+<li>Fixed wrong log replay speed issue in Telemetry simulator (<a href=https://github.com/opentx/opentx/issues/3708>#3708</a>)</li>
+<li>Various texts and translations corrections</li>
+</ul>
+
+
+<h2>Version 2.1.8 / 2016-04-14</h2>
+
+<ul>
+<li>Telemetry Simulator sensor instance number fixed (<a href=https://github.com/opentx/opentx/issues/3207>#3207</a>)</li>
+<li>Fixed: Throttle Source combo-box was populated multiple times (<a href=https://github.com/opentx/opentx/issues/3222>#3222</a>)</li>
+<li>RTC option tool-tip corrected (<a href=https://github.com/opentx/opentx/issues/3225>#3225</a>)</li>
+<li>Fixed: Companion was looking for custom scripts at the wrong place (<a href=https://github.com/opentx/opentx/issues/3237>#3237</a>)</li>
+<li>Offset displayed in inputs screen (<a href=https://github.com/opentx/opentx/issues/3248>#3248</a>)</li>
+<li>Import/export handling was broken for Average formula telemetry sensors (<a href=https://github.com/opentx/opentx/issues/3262>#3262</a>)</li>
+<li>Fixed: Hardware Setup control types and names were not stored in profile (<a href=https://github.com/opentx/opentx/issues/3260>#3260</a>)</li>
+<li>Fixed voice language list (<a href=https://github.com/opentx/opentx/issues/3338>#3338</a>)</li>
+<li>Fixed data overflow in Special Functions Override Channel (<a href=https://github.com/opentx/opentx/issues/3347>#3347</a>)</li>
+<li>Fixed: Sync dialog new line problem (only present for some UI languages) (<a href=https://github.com/opentx/opentx/issues/3350>#3350</a>)</li>
+<li>Removed a few legacy timer limitations, fix non-working limit (<a href=https://github.com/opentx/opentx/issues/3301>#3301</a>)</li>
+<li>Default AVR fuse settings changed to disable JTAG interface (<a href=https://github.com/opentx/opentx/issues/3379>#3379</a>)</li>
+<li>Channel range fix (Start, Channels) in Model Settings, Setup page, int/ext module settings</li>
+<li>Use friendly GVAR names in dialogs (if available)  (<a href=https://github.com/opentx/opentx/issues/3353>#3353</a>)</li>
+<li>Various texts and translations corrections</li>
+</ul>
+
+
+<h2>Version 2.1.7 / 2016-01-04</h2>
+
+<ul>
+<li>Lua 'execute' failed in non-root directory (in Simulator) (<a href=https://github.com/opentx/opentx/issues/3024>#3024</a>)</li>
+<!-- this is disabled until the speed problem is fixed <li>Header line always visible in Outputs, Logical Switches and Special Functions (<a href=https://github.com/opentx/opentx/issues/2861>#2861</a>)</li> -->
+<li>LR12 changes: removed option for remote failsafe configuration, added in EU firmware variant</li>
+<li>Added Clear option to the flight mode context menu (right click on the Name label) (<a href=https://github.com/opentx/opentx/issues/3026>#3026</a>)</li>
+<li>New features for Telemetry Simulator: log replay, user friendly sensor values (<a href=https://github.com/opentx/opentx/issues/3124>#3124</a>)</li>
+<li>Added F7 key to reload LUA permanent scripts in radio simulator (<a href=https://github.com/opentx/opentx/issues/3141>#3141</a>)</li>
+<li>AR9X firmware flashing fall-back was wrong</li>
+<li>Command line options support added to standalone simulator (try "./simulator21 --help" on Linux and "simulator.exe /help" on Windows for usage) (<a href=https://github.com/opentx/opentx/issues/3160>#3160</a>)</li>
+<li>Various rounding problem fixed: Telemetry sensor Ratio parameter (<a href=https://github.com/opentx/opentx/issues/3117>#3117</a>),
+  Outputs Sub-trim, Min and Max values (<a href=https://github.com/opentx/opentx/issues/3156>#3156</a>)</li>
+<li>Fixed: telemetry sensors Ratio and Offset value increment/decrement step (<a href=https://github.com/opentx/opentx/issues/3121>#3121</a>)</li>
+<li>Hardware/Calibration tab split int two tabs (<a href=https://github.com/opentx/opentx/issues/2974>#2974</a>)</li>
+<li>Fixed Fahrenheit temperature conversion error (if PREC was not 0) (<a href=https://github.com/opentx/opentx/issues/3146>#3146</a>)</li>
+<li>Application Setting 'Enable automatic backup before writing firmware' was not saved (<a href=https://github.com/opentx/opentx/issues/3040>#3040</a>)</li>
+<li>Fixed RPM package problem on Fedora (<a href=https://github.com/opentx/opentx/issues/3130>#3130</a>)</li>
+<li>Fixed conversion errors when loading 2.0.x EEPE (<a href=https://github.com/opentx/opentx/issues/3177>#3177</a>)</li>
+<li>Various texts and translations corrections</li>
+</ul>
+
+
 <h2>Version 2.1.6 / 2015-11-11</h2>
-[Taranis]
+
 <ul>
 <li>Telemetry custom screen changes didn't emit modified signal (<a href=https://github.com/opentx/opentx/issues/3029>#3029</a>)</li>
 <li>Hide D8/LR12 when eu firmware option is selected</li>
@@ -22,10 +95,10 @@ Notice: version 2.1.4 was skipped by the OpenTX team to avoid confusion with FrS
 <li>Fixed a problem with updates path on Windows (<a href=https://github.com/opentx/opentx/issues/2876>#2876</a>)</li>
 <li>Edge representation unified (changed from "no release" to "instant") (<a href=https://github.com/opentx/opentx/issues/2837>#2837</a>)</li>
 <li>Added channel names on failsafe sliders (<a href=https://github.com/opentx/opentx/issues/3021>#3021</a>)</li>
-<li>Corrected failsafe mapping when using Custom failsafe mode, D16 protocol and channel range different from from 1-8. 
+<li>Corrected failsafe mapping when using Custom failsafe mode, D16 protocol and channel range different from from 1-8.
   Users with such setups are advised to re-check their failsafe settings (<a href=https://github.com/opentx/opentx/issues/2975>#2975</a>)</li>
 <li>Various texts and translations corrections</li>
-<li>Various small bug-fixes: <a href=https://github.com/opentx/opentx/issues/2994>#2994</a>, 
+<li>Various small bug-fixes: <a href=https://github.com/opentx/opentx/issues/2994>#2994</a>,
                              <a href=https://github.com/opentx/opentx/issues/3016>#3016</a>,
                              <a href=https://github.com/opentx/opentx/issues/3012>#3012</a>
 </li>
@@ -43,8 +116,8 @@ Notice: version 2.1.4 was skipped by the OpenTX team to avoid confusion with FrS
 
 <ul>
 <li>Fixed: Lua model scripts outputs not working in a simulator (<a href=https://github.com/opentx/opentx/issues/2684>#2684</a>)</li>
-<li>Fixed a problem of Companion 2.1 trying to install into 2.0 path. 
-    The effect will only be visible for the users that did not install any of the previous 2.1.x versions. 
+<li>Fixed a problem of Companion 2.1 trying to install into 2.0 path.
+    The effect will only be visible for the users that did not install any of the previous 2.1.x versions.
     (<a href=https://github.com/opentx/opentx/issues/2645>#2645</a>)</li>
 <li>Added missing SDL libraries to MAC package  (<a href=https://github.com/opentx/opentx/issues/2678>#2678</a>)</li>
 <li>Added used channels check/warning in Wizard (<a href=https://github.com/opentx/opentx/issues/2091>#2091</a>)</li>
@@ -125,7 +198,7 @@ Notice: version 2.1.4 was skipped by the OpenTX team to avoid confusion with FrS
 <li>Added Battery meter range setting (<a href=https://github.com/opentx/opentx/issues/2195>#2195</a>)</li>
 <li>Improvements in Print and Compare dialogs (<a href=https://github.com/opentx/opentx/issues/2219>#2219</a>)</li>
 <li>Reset pots to the middle by right double clicking them in Simulator (<a href=https://github.com/opentx/opentx/issues/1939>#1939</a>)</li>
-<li>Minor fixes: <a href=https://github.com/opentx/opentx/issues/2153>#2153</a>, 
+<li>Minor fixes: <a href=https://github.com/opentx/opentx/issues/2153>#2153</a>,
                  <a href=https://github.com/opentx/opentx/issues/2138>#2138</a>,
                  <a href=https://github.com/opentx/opentx/issues/2090>#2090</a>,
                  <a href=https://github.com/opentx/opentx/issues/2122>#2122</a>
@@ -228,13 +301,13 @@ Notice: version 2.1.4 was skipped by the OpenTX team to avoid confusion with FrS
 <ul>
 <li>Sound should be ok on all platforms</li>
 <li>Min/Max reviewed in Logical switches (for the whole telemetry)</li>
-<li>Various bug fixes</li> 
+<li>Various bug fixes</li>
 </ul>
 
 <h2>Version 2.0.3</h2>
 <ul>
 <li>EEPROM import bug on AdjustGVAR function</li>
-<li>Timers correctly displayed in logical switches tab</li> 
+<li>Timers correctly displayed in logical switches tab</li>
 </ul>
 
 <h2>Version 2.0.2</h2>

companion/src/CMakeLists.txt

@@ -1,118 +1,231 @@
-if(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
+set(SIMULATOR_INSTALL_PREFIX "" CACHE STRING "Alternative simulator library search path")
+
+if(${CMAKE_SYSTEM_NAME} MATCHES "(Linux|FreeBSD)")
   set(C9X_NAME_SUFFIX ${VERSION_MAJOR}${VERSION_MINOR})
   set(COMPANION_NAME "companion${C9X_NAME_SUFFIX}")
   set(SIMULATOR_NAME "simulator${C9X_NAME_SUFFIX}")
-  set(SIMULATOR_LIB_PATH ${CMAKE_INSTALL_PREFIX}/lib/companion${C9X_NAME_SUFFIX})
-else(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
+  if (NOT ${SIMULATOR_INSTALL_PREFIX} STREQUAL "")
+    set(SIMULATOR_LIB_PATH ${SIMULATOR_INSTALL_PREFIX}/lib/companion${C9X_NAME_SUFFIX})
+  else()
+    set(SIMULATOR_LIB_PATH ${CMAKE_INSTALL_PREFIX}/lib/companion${C9X_NAME_SUFFIX})
+  endif()
+  message(STATUS "Simulators library search path: " ${SIMULATOR_LIB_PATH})
+  set(SIMULATOR_LIB_INSTALL_PATH ${CMAKE_INSTALL_PREFIX}/lib/companion${C9X_NAME_SUFFIX})
+else()
   set(COMPANION_NAME "companion")
   set(SIMULATOR_NAME "simulator")
-endif(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
+endif()
+
+# This the name that the user will see in the generated DMG and what the application
+# will be called under /Applications. We include the version string to make installing
+# different versions for different eeproms easier, i.e. without manually renaming
+set(COMPANION_OSX_APP_BUNDLE_NAME "OpenTX Companion ${VERSION_MAJOR}.${VERSION_MINOR}")
+
+# On OS X we copy dfu-util to the application bundle. This the path from which we copy
+# the binary (default homebrew path)
+set(DFU_UTIL_PATH "/usr/local/bin/dfu-util")
+set(AVRDUDE_PATH "/usr/local/bin/avrdude")
+set(AVRDUDE_CONF "/usr/local/etc/avrdude.conf")
 
 option(ALLOW_NIGHTLY_BUILDS "Allow nightly builds download / update") # Disabled by default
 if(ALLOW_NIGHTLY_BUILDS)
   add_definitions(-DALLOW_NIGHTLY_BUILDS)
 endif(ALLOW_NIGHTLY_BUILDS)
 
-option(DEBUG_IMPORT "Turn on debug output for EEPROM import") # Disabled by default
-if(DEBUG_IMPORT)
-  add_definitions(-DDEBUG_MODEL_IMPORT)
-  message(STATUS "EEPROM import debugging enabled")
-endif(DEBUG_IMPORT)
+option(DEBUG_STORAGE_IMPORT "Turn on debug output for storage import") # Disabled by default
+if(DEBUG_STORAGE_IMPORT)
+  add_definitions(-DDEBUG_STORAGE_IMPORT)
+  message(STATUS "Storage import debugging enabled")
+endif()
+if(DEBUG)
+  add_definitions(-DDEBUG)
+endif()
 
 option(TABLE_LAYOUT "Use QTableWidget for grid layouts") # Disabled by default
 if(TABLE_LAYOUT)
   add_definitions(-DTABLE_LAYOUT)
   message(STATUS "Using QTableWidget")
-endif(TABLE_LAYOUT)
+endif()
+
+if(WIN32)
+  option(WIN_DO_FULL_INSTALL "'install' target will perform a full installation into CMAKE_INSTALL_PREFIX path, otherwise only supporting DLLs are copied to binaries folder (default)" OFF)
+  option(WIN_USE_CONSOLE "Open a Windows command console for Simulator debug output." OFF)
+  if(WIN_USE_CONSOLE)
+    add_definitions(-DWIN_USE_CONSOLE_STDIO)
+  endif()
+endif()
 
 if(SDL_FOUND)
   include_directories(${SDL_INCLUDE_DIR})
-  add_definitions(-DSIMU_AUDIO)
   add_definitions(-DJOYSTICKS)
 endif()
 
-message(STATUS "Looking for QT lupdate ")
-find_package(Lupdate)
-if(LUPDATE_FOUND)
-  message("QT lupdate: " ${LUPDATE_EXECUTABLE})
+add_definitions(${APP_COMMON_DEFINES})  # set in top-level CMakeLists
+
+if(NOT MSVC)
+  set(WARNING_FLAGS "${WARNING_FLAGS} -Wall")
+  if(WARNINGS_AS_ERRORS)
+    set(WARNING_FLAGS "${WARNING_FLAGS} -Werror")
+  endif()
 else()
-  message("QT lupdate not found!")
+  # silence lots of warnings regarding "insecure" use of functions (sprintf, strcpy, etc)
+  set(WARNING_FLAGS "${WARNING_FLAGS} /D_CRT_SECURE_NO_WARNINGS")
+  if(WARNINGS_AS_ERRORS)
+    set(WARNING_FLAGS "${WARNING_FLAGS} /WX")
+  endif()
 endif()
 
-add_definitions(-DQXT_STATIC)
-
-if(MSVC)
-  set(CMAKE_CXX_FLAGS "/EHsc /LD")
-  include_directories(${PROJECT_SOURCE_DIR}/winbuild C:/Programs/pthreads/Pre-built.2/include C:/Programs/msinttypes C:/Programs/dirent/include)
-  link_directories(C:/Programs/pthreads/Pre-built.2/lib/)
-  set(PTHREAD_LIBRARY pthreadVC2.lib)
+if(WIN32)
+  include_directories(SYSTEM ${WIN_INCLUDE_DIRS})
+  if(NOT WIN_USE_CONSOLE)
+    set(WIN_EXECUTABLE_TYPE WIN32)  # GUI (WinMain) app
+  endif()
+  if(MSVC)
+    if(NOT CLANG)
+      set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /LD /MP")
+    endif()
+    if(NOT WIN_USE_CONSOLE)
+      set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /SUBSYSTEM:WINDOWS,5.01")  # is this even needed?
+    endif()
+  elseif(MINGW)
+    get_filename_component(MINGW_DIR ${CMAKE_CXX_COMPILER} DIRECTORY)
+    # struct packing breaks on MinGW w/out -mno-ms-bitfields: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52991 & http://stackoverflow.com/questions/24015852/struct-packing-and-alignment-with-mingw
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mno-ms-bitfields")
+  endif()
 else()
   set(PTHREAD_LIBRARY pthread)
-  add_definitions(-Wall)
   link_directories(/usr/local/lib)
 endif()
 
-set(RADIO_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/radio/src)
-set(SIMU_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/companion/src/simulation)
-set(COMPANION_SRC_DIRECTORY ${PROJECT_SOURCE_DIR}/companion/src)
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${WARNING_FLAGS}")
+
+use_cxx11()  # ensure gnu++11 in CXX_FLAGS with CMake < 3.1
 
 include_directories(
   ${CMAKE_BINARY_DIR}
   ${CMAKE_CURRENT_BINARY_DIR}
+  ${CMAKE_SOURCE_DIR}
   ${COMPANION_SRC_DIRECTORY}
   ${COMPANION_SRC_DIRECTORY}/shared
   ${SIMU_SRC_DIRECTORY}
-  ${COMPANION_SRC_DIRECTORY}/qxtcommandoptions
+  ${COMPANION_SRC_DIRECTORY}/thirdparty/qcustomplot
+  ${COMPANION_SRC_DIRECTORY}/thirdparty/miniz
+  ${COMPANION_SRC_DIRECTORY}/storage
 )
 
+############# Do macro replacements on input files #############
+configure_file(${COMPANION_SRC_DIRECTORY}/version.h.in ${CMAKE_BINARY_DIR}/version.h @ONLY)
+configure_file(${COMPANION_SRC_DIRECTORY}/companion.desktop.in ${CMAKE_CURRENT_BINARY_DIR}/companion.desktop @ONLY)
+configure_file(${COMPANION_SRC_DIRECTORY}/simulator.desktop.in ${CMAKE_CURRENT_BINARY_DIR}/simulator.desktop @ONLY)
+
+############# Translations ###############
+
+### Generate .qm files and assemble resource (qrc) file.
+
+# available Companion translations (src/translations/*.ts)
+set(LANGUAGES cs de en es fi fr it pl sv zh_CN)
+foreach(language ${LANGUAGES})
+  list(APPEND companion_TS translations/companion_${language}.ts)
+endforeach(language)
+# .ts -> .qm
+qt5_add_translation(companion_QM ${companion_TS})
+
+# add Qt translations if found
+if(QT_TRANSLATIONS_DIR)
+  # Some languages have all translations in one qt_*.qm file and others break them up into modules, in which case we need qt_base_*.qm
+  file(GLOB qtbase_QM "${QT_TRANSLATIONS_DIR}/qtbase_*.qm")
+  file(GLOB qt_QM "${QT_TRANSLATIONS_DIR}/qt_??.qm")  # don't want to match "qt_help_*.qm"
+  list(APPEND qt_QM "${QT_TRANSLATIONS_DIR}/qt_zh_CN.qm" "${QT_TRANSLATIONS_DIR}/qt_zh_TW.qm")  # exceptions not matched by the GLOB
+else()
+  message(STATUS "QT_TRANSLATIONS_DIR not found, unable to package pre-built Qt translations with application.")
+endif()
+
+set(TRANSLATIONS_QRC "${CMAKE_CURRENT_BINARY_DIR}/translations.qrc")
+
+# Dynamically create translations.qrc file (XML) from all collected translation files.
+foreach(qm_file ${companion_QM} ${qt_QM} ${qtbase_QM})
+  get_filename_component(qm_file_name ${qm_file} NAME)
+  # Add file with full path and file name (w/out path) as alias to be used in actual code
+  set(TRANSLATION_FILES_LIST "${TRANSLATION_FILES_LIST}    <file alias=\"${qm_file_name}\">${qm_file}</file>\n")
+endforeach()
+configure_file(${COMPANION_SRC_DIRECTORY}/translations.qrc.in ${TRANSLATIONS_QRC} @ONLY)
+
+### Add optional "translations" target for updating .ts files
+if(QT_LUPDATE_EXECUTABLE)
+  add_custom_target(translations
+    WORKING_DIRECTORY ${COMPANION_SRC_DIRECTORY}
+    COMMAND ${QT_LUPDATE_EXECUTABLE} ${CMAKE_SOURCE_DIR} -no-obsolete -ts ${companion_TS}
+    )
+else()
+  message(STATUS "Qt lupdate not found, 'translations' target will not be availabe.")
+endif()
+
+############# Common lib ###############
+
+set(common_SRCS
+  appdebugmessagehandler.cpp
+  customdebug.cpp
+  helpers.cpp
+  translations.cpp
+  modeledit/node.cpp  # used in simulator
+  modeledit/edge.cpp  # used by node
+  )
+
+set(common_MOC_HDRS
+  appdebugmessagehandler.h
+  helpers.h
+  modeledit/node.h
+  )
+
+set(common_RESOURCES
+  companion.qrc
+  ${TRANSLATIONS_QRC}
+  )
+
+qt5_wrap_cpp(common_SRCS ${common_MOC_HDRS})
+qt5_add_resources(common_RCC ${common_RESOURCES})
+
+add_library(common ${common_SRCS} ${common_RCC})
+
+target_link_libraries(common
+  firmwares
+  storage
+  simulation
+  maxLibQtWidgets
+  Qt5::Core
+  Qt5::Xml
+  Qt5::Widgets
+  ${PTHREAD_LIBRARY}
+  ${SDL_LIBRARY}
+  ${WIN_LINK_LIBRARIES}
+  )
+
+set(CPN_COMMON_LIB common)
+
+############# Supporting libraries ###############
+
+add_subdirectory(datamodels)
+add_subdirectory(firmwares)
 add_subdirectory(shared)
 add_subdirectory(modeledit)
 add_subdirectory(generaledit)
 add_subdirectory(simulation)
-add_subdirectory(qcustomplot)
-add_subdirectory(qxtcommandoptions)
+add_subdirectory(storage)
+add_subdirectory(thirdparty/qcustomplot)
+add_subdirectory(thirdparty/maxlibqt/src/widgets)
 
-set(common_SRCS
-  eeprominterface.cpp
-  firmwares/th9x/th9xeeprom.cpp # TODO not needed
-  firmwares/th9x/th9xinterface.cpp
-  firmwares/er9x/er9xeeprom.cpp
-  firmwares/er9x/er9xinterface.cpp
-  firmwares/gruvin9x/gruvin9xeeprom.cpp
-  firmwares/gruvin9x/gruvin9xinterface.cpp
-  firmwares/ersky9x/ersky9xeeprom.cpp
-  firmwares/ersky9x/ersky9xinterface.cpp
-  firmwares/opentx/opentxeeprom.cpp
-  firmwares/opentx/open9xStockeeprom.cpp
-  firmwares/opentx/open9xGruvin9xeeprom.cpp
-  firmwares/opentx/open9xSky9xeeprom.cpp
-  firmwares/opentx/opentxinterface.cpp
-  file.cpp
-  appdata.cpp
-  )
-
-qt5_wrap_cpp(common_SRCS)
-
-add_library(common ${common_SRCS})
-qt5_use_modules(common Core Xml Widgets)
+############# Companion ###############
 
 set(companion_SRCS
-  hexinterface.cpp
-  firmwareinterface.cpp
-  converteeprom.cpp
-  # xmlinterface.cpp
-  # ${PROJECT_BINARY_DIR}/radio.cxx
-  helpers.cpp
   helpers_html.cpp
   mdichild.cpp
   modelslist.cpp
-  mountlist.cpp
   apppreferencesdialog.cpp
   fwpreferencesdialog.cpp
   burnconfigdialog.cpp
   multimodelprinter.cpp
   comparedialog.cpp
-  contributorsdialog.cpp
+  creditsdialog.cpp
   releasenotesdialog.cpp
   releasenotesfirmwaredialog.cpp
   customizesplashdialog.cpp
@@ -135,6 +248,8 @@ set(companion_SRCS
   radionotfound.cpp
   wizarddata.cpp
   wizarddialog.cpp
+  styleeditdialog.cpp
+  dialogs/filesyncdialog.cpp         # TODO move to own lib with other dialogs
   )
 
 set(companion_MOC_HDRS
@@ -145,7 +260,7 @@ set(companion_MOC_HDRS
   printdialog.h
   fusesdialog.h
   logsdialog.h
-  contributorsdialog.h
+  creditsdialog.h
   releasenotesdialog.h
   releasenotesfirmwaredialog.h
   customizesplashdialog.h
@@ -159,14 +274,16 @@ set(companion_MOC_HDRS
   flashfirmwaredialog.h
   flasheepromdialog.h
   downloaddialog.h
-  modelslist.h
   mdichild.h
   mainwindow.h
   radionotfound.h
-  helpers.h
   wizarddialog.h
   modelprinter.h
   multimodelprinter.h
+  modelslist.h
+  styleeditdialog.h
+  helpers_html.h
+  dialogs/filesyncdialog.h
   )
 
 set(companion_UIS
@@ -187,213 +304,254 @@ set(companion_UIS
   flashfirmwaredialog.ui
   flasheepromdialog.ui
   radionotfound.ui
+  styleeditdialog.ui
   )
 
-set(companion_RESOURCES
-  companion.qrc
-  ${CMAKE_CURRENT_BINARY_DIR}/translations.qrc
-  )
-
-configure_file(${COMPANION_SRC_DIRECTORY}/version.h.in ${CMAKE_BINARY_DIR}/version.h @ONLY)
-configure_file(${COMPANION_SRC_DIRECTORY}/translations.qrc.in ${CMAKE_CURRENT_BINARY_DIR}/translations.qrc @ONLY)
-configure_file(${COMPANION_SRC_DIRECTORY}/companion.desktop.in ${CMAKE_CURRENT_BINARY_DIR}/companion.desktop @ONLY)
-configure_file(${COMPANION_SRC_DIRECTORY}/simulator.desktop.in ${CMAKE_CURRENT_BINARY_DIR}/simulator.desktop @ONLY)
-
 if(WIN32)
-  set(companion_SRCS ${companion_SRCS} icon.rc)
-  if(NOT MSVC)
-    set(CMAKE_EXE_LINKER_FLAGS -mwindows)
-  endif()
+  set(icon_RC images/winicons/icon.rc)
 endif()
 
-include_directories(${CMAKE_BINARY_DIR})
-include_directories(${CMAKE_SOURCE_DIR})
-
-set(LANGUAGES he pl pt ru de fr es it sv cs fi nl)
-foreach(language ${LANGUAGES})
-  set(companion_TS ${companion_TS} translations/companion_${language}.ts)
-endforeach(language)
-
 qt5_wrap_ui(companion_SRCS ${companion_UIS})
 qt5_wrap_cpp(companion_SRCS ${companion_MOC_HDRS})
-qt5_add_translation(companion_QM ${companion_TS})
-qt5_add_resources(companion_RCC ${companion_RESOURCES})
-add_custom_target(gen_qrc DEPENDS ${companion_RCC})
 
-add_definitions(-DQT_TRANSLATIONS_DIR="${QT_TRANSLATIONS_DIR}")
+add_executable(${COMPANION_NAME} MACOSX_BUNDLE ${WIN_EXECUTABLE_TYPE} ${companion_SRCS} ${icon_RC})
+target_link_libraries(${COMPANION_NAME} PRIVATE generaledit modeledit qcustomplot shared ${CPN_COMMON_LIB})
 
-if(APPLE)
-  add_executable(${COMPANION_NAME} MACOSX_BUNDLE ${companion_SRCS} ${companion_RCC} ${companion_QM})
-  # OS X compiler no longer automatically includes /Library/Frameworks in search path
-  set(CMAKE_EXE_LINKER_FLAGS -F/Library/Frameworks)
-else()
-  add_executable(${COMPANION_NAME} WIN32 ${companion_SRCS} ${companion_RCC} ${companion_QM})
+PrintTargetReport("${COMPANION_NAME}")
+
+############# Standalone simulator ###############
+
+set(simu_SRCS simulator.cpp )
+
+add_executable(${SIMULATOR_NAME} MACOSX_BUNDLE ${WIN_EXECUTABLE_TYPE} ${simu_SRCS} ${icon_RC})
+target_link_libraries(${SIMULATOR_NAME} PRIVATE ${CPN_COMMON_LIB})
+
+############# Install ####################
+
+# Generate list of simulator plugins, used by all platforms
+file(GLOB simulator_plugins "${CMAKE_BINARY_DIR}/*opentx-*simulator${CMAKE_SHARED_LIBRARY_SUFFIX}")
+# the current flavour is not automatically added if build in the current cmake iteration, so always
+# add its library name to be sure
+string(TOLOWER ${PCB} FLAVOUR)
+if(POLICY CMP0026)
+  cmake_policy(SET CMP0026 OLD)  # https://cmake.org/cmake/help/v3.0/policy/CMP0026.html
+endif()
+if(SIMU_TARGET)
+  get_property(current_plugin TARGET opentx-${FLAVOUR}-simulator PROPERTY LOCATION)
+  list(APPEND simulator_plugins "${current_plugin}")
 endif()
 
-add_dependencies(${COMPANION_NAME} gen_qrc)
-qt5_use_modules(${COMPANION_NAME} Core Widgets Network)
-target_link_libraries(${COMPANION_NAME} PRIVATE generaledit modeledit simulation common qcustomplot shared ${PTHREAD_LIBRARY} ${SDL_LIBRARY})
-
-############# Standalone simu ###############
-
-set(simu_SRCS
-  modeledit/node.cpp
-  modeledit/edge.cpp # TODO not needed
-  simulator.cpp
-  )
-
-set(simu_MOC_HDRS
-  modeledit/node.h
-  )
-
-qt5_wrap_cpp(simu_SRCS ${simu_MOC_HDRS} )
-
-if(WIN32)
-  set(simu_SRCS ${simu_SRCS} icon.rc)
-endif()
-
-if(APPLE)
-  add_executable(${SIMULATOR_NAME} MACOSX_BUNDLE ${simu_SRCS} ${companion_RCC})
-else()
-  add_executable(${SIMULATOR_NAME} WIN32 ${simu_SRCS} ${companion_RCC})
-endif()
-
-add_dependencies(${SIMULATOR_NAME} gen_qrc)
-# TODO not the same link command than companion?
-target_link_libraries(${SIMULATOR_NAME} PRIVATE simulation common qxtcommandoptions ${QT_LIBRARIES} ${QT_QTMAIN_LIBRARY} ${PTHREAD_LIBRARY} ${SDL_LIBRARY} ${OPENTX_SIMULATOR_LIBS})
-
-############# Packaging ####################
-message(STATUS ${CMAKE_BINARY_DIR} ${CMAKE_INSTALL_PREFIX}/bin)
 if(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
+
+  message(STATUS "install " ${CMAKE_BINARY_DIR} " to " ${CMAKE_INSTALL_PREFIX}/bin)
   install(TARGETS ${COMPANION_NAME} DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
   install(TARGETS ${SIMULATOR_NAME} DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
-  install(DIRECTORY ${CMAKE_BINARY_DIR}/ DESTINATION ${SIMULATOR_LIB_PATH} USE_SOURCE_PERMISSIONS
-    FILES_MATCHING PATTERN "libopentx-*.so"
-    PATTERN "CMakeFiles" EXCLUDE
-    PATTERN "_CPack_Packages" EXCLUDE
-    PATTERN "companion" EXCLUDE
-    PATTERN "radio" EXCLUDE
-  )
+  install(FILES ${simulator_plugins} DESTINATION "${SIMULATOR_LIB_INSTALL_PATH}")
   install(FILES ${CMAKE_CURRENT_BINARY_DIR}/companion.desktop DESTINATION share/applications RENAME companion${C9X_NAME_SUFFIX}.desktop)
   install(FILES ${CMAKE_CURRENT_BINARY_DIR}/simulator.desktop DESTINATION share/applications RENAME simulator${C9X_NAME_SUFFIX}.desktop)
   if(${CMAKE_INSTALL_PREFIX} MATCHES "/usr/local")
-    install(FILES images/linuxicons/16x16/companion.png DESTINATION /usr/share/icons/hicolor/16x16/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/22x22/companion.png DESTINATION /usr/share/icons/hicolor/22x22/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/24x24/companion.png DESTINATION /usr/share/icons/hicolor/24x24/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/32x32/companion.png DESTINATION /usr/share/icons/hicolor/32x32/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/48x48/companion.png DESTINATION /usr/share/icons/hicolor/48x48/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/128x128/companion.png DESTINATION /usr/share/icons/hicolor/128x128/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/256x256/companion.png DESTINATION /usr/share/icons/hicolor/256x256/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/512x512/companion.png DESTINATION /usr/share/icons/hicolor/512x512/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/scalable/companion.svg DESTINATION /usr/share/icons/hicolor/scalable/apps RENAME companion${C9X_NAME_SUFFIX}.svg)
-    install(FILES ../targets/linux/45-companion-taranis.rules DESTINATION /lib/udev/rules.d RENAME 45-companion${C9X_NAME_SUFFIX}-taranis.rules)
-  else()
-    install(FILES images/linuxicons/16x16/companion.png DESTINATION share/icons/hicolor/16x16/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/22x22/companion.png DESTINATION share/icons/hicolor/22x22/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/24x24/companion.png DESTINATION share/icons/hicolor/24x24/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/32x32/companion.png DESTINATION share/icons/hicolor/32x32/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/48x48/companion.png DESTINATION share/icons/hicolor/48x48/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/128x128/companion.png DESTINATION share/icons/hicolor/128x128/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/256x256/companion.png DESTINATION share/icons/hicolor/256x256/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/512x512/companion.png DESTINATION share/icons/hicolor/512x512/apps RENAME companion${C9X_NAME_SUFFIX}.png)
-    install(FILES images/linuxicons/scalable/companion.svg DESTINATION share/icons/hicolor/scalable/apps RENAME companion${C9X_NAME_SUFFIX}.svg)
-    install(FILES ../targets/linux/45-companion-taranis.rules DESTINATION lib/udev/rules.d RENAME 45-companion${C9X_NAME_SUFFIX}-taranis.rules)
+    set(INSTALL_TEMP_SHR_PFX "/usr/")
+    set(INSTALL_TEMP_LIB_PFX "/")
   endif()
+  install(FILES images/linuxicons/16x16/companion.png DESTINATION ${INSTALL_TEMP_SHR_PFX}share/icons/hicolor/16x16/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/22x22/companion.png DESTINATION ${INSTALL_TEMP_SHR_PFX}share/icons/hicolor/22x22/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/24x24/companion.png DESTINATION ${INSTALL_TEMP_SHR_PFX}share/icons/hicolor/24x24/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/32x32/companion.png DESTINATION ${INSTALL_TEMP_SHR_PFX}share/icons/hicolor/32x32/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/48x48/companion.png DESTINATION ${INSTALL_TEMP_SHR_PFX}share/icons/hicolor/48x48/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/128x128/companion.png DESTINATION ${INSTALL_TEMP_SHR_PFX}share/icons/hicolor/128x128/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/256x256/companion.png DESTINATION ${INSTALL_TEMP_SHR_PFX}share/icons/hicolor/256x256/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/512x512/companion.png DESTINATION ${INSTALL_TEMP_SHR_PFX}share/icons/hicolor/512x512/apps RENAME companion${C9X_NAME_SUFFIX}.png)
+  install(FILES images/linuxicons/scalable/companion.svg DESTINATION ${INSTALL_TEMP_SHR_PFX}share/icons/hicolor/scalable/apps RENAME companion${C9X_NAME_SUFFIX}.svg)
+  install(FILES ../targets/linux/45-companion-taranis.rules DESTINATION ${INSTALL_TEMP_LIB_PFX}lib/udev/rules.d RENAME 45-companion${C9X_NAME_SUFFIX}-taranis.rules)
+  install(FILES ../targets/linux/45-usbasp.rules DESTINATION ${INSTALL_TEMP_LIB_PFX}lib/udev/rules.d RENAME 45-companion${C9X_NAME_SUFFIX}-usbasp.rules)
   # Linux specific code
   set(OperatingSystem "Linux")
-elseif(WIN32)
-  get_target_property(QtCore_LOCATION Qt5::Core LOCATION)
-  get_filename_component(QT_DLL_DIR ${QtCore_LOCATION} PATH)
-  get_filename_component(SDL_DIR ${SDL_LIBRARY} PATH)
-  install(FILES ${QT_DLL_DIR}/icudt54.dll ${QT_DLL_DIR}/icuin54.dll ${QT_DLL_DIR}/icuuc54.dll ${QT_DLL_DIR}/Qt5Core.dll ${QT_DLL_DIR}/Qt5Gui.dll ${QT_DLL_DIR}/Qt5Widgets.dll ${QT_DLL_DIR}/Qt5Xml.dll ${QT_DLL_DIR}/Qt5Network.dll ${QT_DLL_DIR}/Qt5PrintSupport.dll ${QT_DLL_DIR}/Qt5Multimedia.dll ${SDL_DIR}/SDL.dll DESTINATION ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/$<CONFIG>)
-  install(FILES ${QT_DLL_DIR}/icudt54.dll ${QT_DLL_DIR}/icuin54.dll ${QT_DLL_DIR}/icuuc54.dll ${QT_DLL_DIR}/Qt5Cored.dll ${QT_DLL_DIR}/Qt5Guid.dll ${QT_DLL_DIR}/Qt5Widgetsd.dll ${QT_DLL_DIR}/Qt5Xmld.dll ${QT_DLL_DIR}/Qt5Networkd.dll ${QT_DLL_DIR}/Qt5PrintSupportd.dll ${QT_DLL_DIR}/Qt5Multimediad.dll ${SDL_DIR}/SDL.dll DESTINATION ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/$<CONFIG>)
-endif()
 
-if(WIN32)
-  if(MSVC)
-    set(COMPANION_NSI_IN_FILE companion-vs.nsi.in)
-    set(SIMULATOR_NSI_IN_FILE simulator-vs.nsi.in)
+elseif(WIN32)
+
+  if(NOT WIN_DO_FULL_INSTALL)
+    # Just copy supporting DLLs to build folder
+    set(INSTALL_DESTINATION "${CMAKE_RUNTIME_OUTPUT_DIRECTORY}")
+    message(STATUS "Partial install to " ${INSTALL_DESTINATION})
   else()
-    set(COMPANION_NSI_IN_FILE companion-msys.nsi.in)
-    set(SIMULATOR_NSI_IN_FILE simulator-msys.nsi.in)
+    # Full Windows installation with all supporting files
+    set(INSTALL_DESTINATION "${CMAKE_INSTALL_PREFIX}")
+    message(STATUS "Full install to " ${INSTALL_DESTINATION})
+    # companion & simulator binaries
+    install(TARGETS ${COMPANION_NAME} DESTINATION ${INSTALL_DESTINATION})
+    install(TARGETS ${SIMULATOR_NAME} DESTINATION ${INSTALL_DESTINATION})
+    install(FILES ${simulator_plugins} DESTINATION "${INSTALL_DESTINATION}")
+    # supporting utilities
+    set(INSTALL_TEMP_FILES avrdude.exe avrdude.conf dfu-util.exe libusb0.dll libusb-1.0.dll license.txt)
+    foreach(tmpfile ${INSTALL_TEMP_FILES})
+      install(FILES "${COMPANION_SRC_DIRECTORY}/../targets/windows/${tmpfile}" DESTINATION ${INSTALL_DESTINATION})
+    endforeach()
+  endif()  # WIN_DO_FULL_INSTALL
+
+  # Qt dlls (using windeployqt)
+  ## Qt translations are already packaged into our custom qrc. Also don't need software rendering engines.
+  set(wdqtopts --no-translations --no-opengl-sw --no-system-d3d-compiler --no-angle)
+  if(CMAKE_BUILD_TYPE STREQUAL "Release")
+    set(wdqtopts ${wdqtopts} --release)  # release builds aren't always properly detected with mingw
+  endif()
+  if(MSVC)
+    set(wdqtopts ${wdqtopts} --no-compiler-runtime)  # --compiler-runtime includes vcredist_x86, but we just copy the required DLLs manually
+  endif()
+  set(wdqtopts ${wdqtopts} -dir "${INSTALL_DESTINATION}" "${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/${COMPANION_NAME}.exe" "${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/${SIMULATOR_NAME}.exe")
+  # Add installer command to execute windeployqt
+  install(CODE "execute_process(COMMAND \"${QT_BIN_DIR}/windeployqt.exe\" ${wdqtopts})")
+
+  # SDL dll
+  if(SDL_FOUND AND EXISTS "${SDL_LIBRARY_PATH}/SDL.dll")
+    set(SDL_DIR ${SDL_LIBRARY_PATH})  # this is also used by NSIS installer script
+    install(FILES ${SDL_DIR}/SDL.dll DESTINATION ${INSTALL_DESTINATION})
+  elseif(SDL_FOUND)
+    message(WARNING "Installer: SDL.dll not found, set SDL_LIBRARY_PATH manually.")
   endif()
 
-  set(SYSDIR "$ENV{windir}/system32")
-  configure_file(${CMAKE_CURRENT_SOURCE_DIR}/../targets/windows/${COMPANION_NSI_IN_FILE} ${PROJECT_BINARY_DIR}/companion/companion.nsi @ONLY)
-  configure_file(${CMAKE_CURRENT_SOURCE_DIR}/../targets/windows/${SIMULATOR_NSI_IN_FILE} ${PROJECT_BINARY_DIR}/companion/simulator.nsi @ONLY)
+  # libeay (SSL) dlls  (used by QtNetwork) -- not strictly required but avoids possible issues with downloads and Qt warnings.
+  file(TO_CMAKE_PATH "$ENV{PROGRAMFILES}" WIN_PROGRAM_FILES)
+  find_path(EAY_LIB_DIR libeay32.dll HINTS
+    "${WIN_PROGRAM_FILES}/OpenSSL" "${WIN_PROGRAM_FILES}/OpenSSL-Win32"
+    "C:/OpenSSL/" "C:/OpenSSL-Win32/"
+    "${WIN_EXTRA_LIBS_PATH}" "${WIN_EXTRA_LIBS_PATH}/OpenSSL" "${WIN_EXTRA_LIBS_PATH}/OpenSSL-Win32"
+    "${MINGW_DIR}/../opt/bin"
+    "${PYTHON_DIRECTORY}/lib/site-packages/PyQt4"
+    PATH_SUFFIXES bin
+    DOC "Path to libeay32.dll and ssleay32.dll (OpenSSL)"
+  )
+  if (EAY_LIB_DIR)
+    install(FILES "${EAY_LIB_DIR}/libeay32.dll" "${EAY_LIB_DIR}/ssleay32.dll" DESTINATION ${INSTALL_DESTINATION} OPTIONAL)
+  else()
+    message(WARNING "Installer: SSL libs not found, set EAY_LIB_DIR manually.")
+  endif()
+
+  # C++/system dlls, depends on compiler
+  if(MSVC)
+    file(TO_CMAKE_PATH "$ENV{windir}/SysWOW64" WIN_SYSDIR)    # This would be "system32" for a 64-bit build or on x86... but how to tell?
+    if (NOT EXISTS "${WIN_SYSDIR}")
+      file(TO_CMAKE_PATH "$ENV{windir}/system32" WIN_SYSDIR)  # Must be 32-bit Windows.
+    endif()
+    install(FILES "${WIN_SYSDIR}/msvcp140.dll" "${WIN_SYSDIR}/vcruntime140.dll" DESTINATION ${INSTALL_DESTINATION} OPTIONAL)
+    if(WIN_PTHREAD_DLL)
+      install(FILES "${WIN_PTHREAD_DLL}" DESTINATION ${INSTALL_DESTINATION})
+    endif()
+  endif()
+
+endif() # WIN32 install
+
+############# Packaging ####################
+
+# Create Windows installer with NSIS
+if(WIN32)
 
   find_program(NSIS_EXE makensis.exe PATHS
     "C:/Program Files/NSIS"
     "C:/Program Files (x86)/NSIS"
     "C:/Programs/NSIS"
+    "${WIN_EXTRA_LIBS_PATH}/NSIS"
+  )
+
+  if (NSIS_EXE)
+    file(TO_NATIVE_PATH "${INSTALL_DESTINATION}" NSIS_DISTRO)  # all files in here will be included in installer
+    set(NSI_FILE "${PROJECT_BINARY_DIR}/companion/companion.nsi")
+    configure_file("${CMAKE_CURRENT_SOURCE_DIR}/../targets/windows/companion.nsi.in" "${NSI_FILE}" @ONLY)
+
+    add_custom_target(installer
+      # The 'install' target prepares all the distro files, make sure it has been executed first.
+      COMMAND "${CMAKE_COMMAND}" --build "${CMAKE_BINARY_DIR}" --target install
+      COMMAND "${NSIS_EXE}" "${NSI_FILE}"
+      DEPENDS "${NSI_FILE}"
+      COMMENT "Building Windows NSIS installer..."
     )
-
-  add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/companion/companion-windows.exe
-    COMMAND "${NSIS_EXE}" ARGS ${PROJECT_BINARY_DIR}/companion/companion.nsi
-    DEPENDS companion simulator opentx-simulators ${PROJECT_BINARY_DIR}/companion/companion.nsi
-    COMMENT "Companion Windows NSIS Installer")
-
-  add_custom_command(OUTPUT ${PROJECT_BINARY_DIR}/companion/simulator-install.exe
-    COMMAND "${NSIS_EXE}" ARGS ${PROJECT_BINARY_DIR}/companion/simulator.nsi
-    DEPENDS simulator ${PROJECT_BINARY_DIR}/companion/simulator.nsi
-    COMMENT "Simulator Windows NSIS Installer")
-
-  add_custom_target(installer
-    DEPENDS ${PROJECT_BINARY_DIR}/companion/companion-windows.exe
-    DEPENDS ${PROJECT_BINARY_DIR}/companion/simulator-windows.exe
-    SOURCES ${PROJECT_BINARY_DIR}/companion/companion.nsi
-    SOURCES ${PROJECT_BINARY_DIR}/companion/simulator.nsi
-    )
-endif()
-
-if(APPLE)
-  set(MACOSX_BUNDLE_ICON_FILE iconmac.icns)
-  if(CMAKE_GENERATOR STREQUAL Xcode)
-    set(WORK_DIR ${CMAKE_BINARY_DIR}/Debug)
-  else()
-    set(WORK_DIR ${PROJECT_BINARY_DIR})
   endif()
 
-  add_custom_target(addframeworks
-    COMMAND mkdir -p companion.app/Contents/Frameworks
-    COMMAND mkdir -p companion.app/Contents/Resources
-    COMMAND mkdir -p companion.app/Contents/translations
-    COMMAND rsync ${PROJECT_SOURCE_DIR}/images/${MACOSX_BUNDLE_ICON_FILE} companion.app/Contents/Resources/${MACOSX_BUNDLE_ICON_FILE} # Copy the icon files
-    COMMAND rsync -r --exclude=.svn ${PROJECT_SOURCE_DIR}/../targets/mac/qt_menu.nib companion.app/Contents/Resources/
-    COMMAND rsync ${PROJECT_BINARY_DIR}/*.qm companion.app/Contents/translations
-    COMMAND rsync ${PROJECT_BINARY_DIR}/*.qm companion.app/Contents/translations
-    COMMAND rsync -r /Library/Frameworks/SDL.framework companion.app/Contents/Frameworks/
-    COMMAND ${QT_BINARY_DIR}/macdeployqt companion.app
-    COMMAND install_name_tool -change @rpath/SDL.framework/Versions/A/SDL @executable_path/../Frameworks/SDL.framework/Versions/A/SDL companion.app/Contents/MacOS/companion
-    WORKING_DIRECTORY ${WORK_DIR}
-    DEPENDS ${COMPANION_NAME})
-
-  add_custom_target(makedmg
-    COMMAND ${QT_BINARY_DIR}/macdeployqt companion.app -dmg -no-plugins
-    WORKING_DIRECTORY ${WORK_DIR}
-    DEPENDS addframeworks opentx-simulators-bundle)
-endif()
-
-if(LUPDATE_FOUND)
-  add_custom_target(translations
-    WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
-    COMMAND ${LUPDATE_EXECUTABLE} ${CMAKE_SOURCE_DIR} -no-obsolete -ts ${companion_TS}
-    )
-else()
-  add_custom_target(translations
-    COMMAND echo "Sorry, QT lupdate was not found."
-    )
 endif()
 
 set(CPACK_PACKAGE_NAME "companion${C9X_NAME_SUFFIX}")
-set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Models and settings editor for the OpenTx open source firmware")
+set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Models and settings editor for the OpenTX open source firmware")
 string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_PACKAGE_NAME_LOWERCASE)
 
 # The file stripping is deliberately disabled, with the stripped file we get
 # very poor trace-backs from the users when they report Companion crash
 set(CPACK_STRIP_FILES FALSE)
 
+# Qt5 + Cmake + Mac is poorly documented. A lot of this is guesswork
+# and trial and error. Do not hesitate to fix it for the better
+IF(APPLE)
+  set(plugin_dest_dir ${COMPANION_NAME}.app/Contents/Plugins)
+  set(qtconf_dest_dir ${COMPANION_NAME}.app/Contents/Resources)
+  set(APPS "\${CMAKE_INSTALL_PREFIX}/${COMPANION_NAME}.app")
+  set(companion_res_dir ${COMPANION_NAME}.app/Contents/Resources)
+
+  set_target_properties(${COMPANION_NAME} PROPERTIES MACOSX_BUNDLE_BUNDLE_NAME "Companion ${VERSION_MAJOR}.${VERSION_MINOR}")
+  set_target_properties(${SIMULATOR_NAME} PROPERTIES MACOSX_BUNDLE_BUNDLE_NAME "Simulator ${VERSION_MAJOR}.${VERSION_MINOR}")
+
+  # Use a non standard Info.plist that adds Retina support flags
+  set_target_properties(${COMPANION_NAME} PROPERTIES MACOSX_BUNDLE_INFO_PLIST ${PROJECT_SOURCE_DIR}/companion/targets/mac/MacOSXBundleInfo.plist.in)
+  set_target_properties(${SIMULATOR_NAME} PROPERTIES MACOSX_BUNDLE_INFO_PLIST ${PROJECT_SOURCE_DIR}/companion/targets/mac/MacOSXBundleInfo.plist.in)
+
+  INSTALL(TARGETS ${COMPANION_NAME}
+      BUNDLE DESTINATION . COMPONENT Runtime
+      RUNTIME DESTINATION bin COMPONENT Runtime
+      )
+
+  install(FILES ${simulator_plugins} DESTINATION "${companion_res_dir}" COMPONENT Runtime)
+
+  # Write qt.conf to tell qt where to find it plugins
+  file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/qt.conf"
+    "[Paths]\nPlugins = Plugins\n")
+  install(FILES "${CMAKE_CURRENT_BINARY_DIR}/qt.conf"
+    DESTINATION "${companion_res_dir}"
+    COMPONENT Runtime)
+
+  # menu file
+  install(DIRECTORY ${PROJECT_SOURCE_DIR}/companion/targets/mac/qt_menu.nib DESTINATION "${companion_res_dir}" COMPONENT Runtime)
+
+  # manually add the required plugins
+  foreach (plugin ${Qt5Multimedia_PLUGINS} ${Qt5PrintSupport_PLUGINS} ${Qt5Gui_PLUGINS} ${Qt5Svg_PLUGINS})
+    get_target_property(QPA_PLUGIN ${plugin} LOCATION)
+    get_filename_component(QPA_PLUGIN_FILENAME ${QPA_PLUGIN} NAME)
+    # Todo is there a nicer way to get the QT Plugin directory name?!
+    get_filename_component(QPA_PLUGIN_DIRECTORY ${QPA_PLUGIN} DIRECTORY)
+    get_filename_component(QPA_PLUGIN_DIRECTORY ${QPA_PLUGIN_DIRECTORY} NAME)
+
+    install(FILES ${QPA_PLUGIN} DESTINATION "${plugin_dest_dir}/${QPA_PLUGIN_DIRECTORY}/" COMPONENT Runtime)
+
+    list(APPEND bundle_qt_libs "\${CMAKE_INSTALL_PREFIX}/${plugin_dest_dir}/${QPA_PLUGIN_DIRECTORY}/${QPA_PLUGIN_FILENAME}")
+  endforeach()
+
+  # Add icon
+  set(MACOSX_BUNDLE_ICON_FILE iconmac.icns)
+  set(MAC_ICON_FILE ${COMPANION_SRC_DIRECTORY}/images/${MACOSX_BUNDLE_ICON_FILE})
+  SET_SOURCE_FILES_PROPERTIES(${MAC_ICON_FILE} PROPERTIES MACOSX_PACKAGE_LOCATION Resources)
+  set(${COMPANION_SOURCES} ${COMPANION_SOURCES} ${PROJECT_SOURCE_DIR}/images/${MACOSX_BUNDLE_ICON_FILE})
+  install(FILES ${MAC_ICON_FILE} DESTINATION ${companion_res_dir} COMPONENT Runtime)
+
+  # Copy dfu-util and avrdude, resolve symlink first
+  get_filename_component(DFU_UTIL_ABSOLUTE_PATH ${DFU_UTIL_PATH} REALPATH)
+  get_filename_component(AVRDUDE_ABSOLUTE_PATH ${AVRDUDE_PATH} REALPATH)
+  get_filename_component(AVRDUDECONF_ABSOLUTE_PATH ${AVRDUDE_CONF} REALPATH)
+  install(PROGRAMS ${DFU_UTIL_ABSOLUTE_PATH} ${AVRDUDE_ABSOLUTE_PATH} DESTINATION ${companion_res_dir} COMPONENT Runtime)
+  install(FILES ${AVRDUDECONF_ABSOLUTE_PATH} DESTINATION ${companion_res_dir} COMPONENT Runtime)
+
+  set(bundle_tools_path "\${CMAKE_INSTALL_PREFIX}/${companion_res_dir}/dfu-util;\${CMAKE_INSTALL_PREFIX}/${companion_res_dir}/avrdude")
+
+
+  # Include depencies (adding frameworks, fixing the embbeded libraries)
+  # I get write errors without setting BU_CHMOD_BUNDLE_ITEMS even though it is
+  # technically a hack (that is already is in the Bundle library ...)
+  install(CODE "
+   include(BundleUtilities)
+   file(GLOB bundle_simulator_libs \"\${CMAKE_INSTALL_PREFIX}/${companion_res_dir}/libopentx-*${CMAKE_SHARED_LIBRARY_SUFFIX}\")
+   set(BU_CHMOD_BUNDLE_ITEMS on)
+   fixup_bundle(\"${APPS}\"   \"\${bundle_simulator_libs};${bundle_qt_libs};${bundle_tools_path}\"   \"${QT_LIB_DIR}\")
+   file(RENAME \"\${CMAKE_INSTALL_PREFIX}/${COMPANION_NAME}.app\" \"\${CMAKE_INSTALL_PREFIX}/${COMPANION_OSX_APP_BUNDLE_NAME}.app\")
+   " COMPONENT Runtime)
+endif()
+
 find_program(DPKG_PROGRAM dpkg DOC "dpkg program of Debian-based systems")
+
 if(DPKG_PROGRAM)
   set(CPACK_GENERATOR "DEB")
   execute_process(
@@ -407,13 +565,22 @@ if(DPKG_PROGRAM)
   set(CPACK_DEBIAN_PACKAGE_VERSION_MAJOR ${VERSION_MAJOR})
   set(CPACK_DEBIAN_PACKAGE_VERSION_MINOR ${VERSION_MINOR})
   set(CPACK_DEBIAN_ARCHITECTURE $(CMAKE_SYSTEM_PROCESSOR))
+  set(CPACK_DEBIAN_PACKAGE_DEPENDS "libqt5multimedia5-plugins")
   set(CPACK_DEBIAN_PACKAGE_SHLIBDEPS ON)
+elseif(APPLE)
+  set(CPACK_GENERATOR "DragNDrop")
+# set(CPACK_GENERATOR "TGZ")  # for quick testing
+  set(CPACK_BINARY_DRAGNDROP ON)
+  set(CPACK_DMG_BACKGROUND_IMAGE ${COMPANION_SRC_DIRECTORY}/images/splash22_3_dmg.png)
+  set(CPACK_DMG_VOLUME_NAME "OpenTX Companion")
+  set(CPACK_DMG_DS_STORE ${PROJECT_SOURCE_DIR}/companion/targets/mac/DS_Store)
+  set(CPACK_PACKAGE_FILE_NAME "opentx-${CPACK_PACKAGE_NAME_LOWERCASE}-${VERSION}")
 else(DPKG_PROGRAM)
   set(CPACK_GENERATOR "RPM")
   set(CPACK_RPM_PACKAGE_VERSION ${VERSION})
   set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
   set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME_LOWERCASE}-${VERSION}-${CMAKE_SYSTEM_PROCESSOR}")
-  SET(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION "/lib /lib/udev /lib/udev/rules.d")
+  set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION "/lib /lib/udev /lib/udev/rules.d")
 endif(DPKG_PROGRAM)
 
 include(CPack)

companion/src/appdata.cpp

@@ -1,800 +0,0 @@
-/*
- * Author - Kjell Kernen
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include "appdata.h"
-
-// Global data and storage object
-AppData g;
-
-// ** CompStoreObj class********************
-void CompStoreObj::clear (const QString tag1, const QString tag2, const QString tag3)
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (tag2.isEmpty())
-    {
-        settings.remove(tag1);
-    }
-    else if (tag3.isEmpty())
-    {
-        settings.beginGroup(tag1);
-        settings.remove(tag2);
-        settings.endGroup();
-    }
-    else
-    {
-        settings.beginGroup(tag1);
-        settings.beginGroup(tag2);
-        settings.remove(tag3);
-        settings.endGroup();
-        settings.endGroup();
-    }
-}
-
-void CompStoreObj::store(const QByteArray newArray, QByteArray &array, const QString tag, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    settings.setValue(tag, newArray);
-    array = newArray;
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-void CompStoreObj::store(const QStringList newSList, QStringList &stringList, const QString tag, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    settings.setValue(tag, newSList);
-    stringList = newSList;
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-void CompStoreObj::store(const QString newString, QString &string, const QString tag, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    settings.setValue(tag, newString);
-    string = newString;
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-void CompStoreObj::store(const bool newTruth, bool &truth, const QString tag, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    settings.setValue(tag, newTruth);
-    truth = newTruth;
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-void CompStoreObj::store(const int newNumber, int &number, const QString tag, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    settings.setValue(tag, newNumber);
-    number = newNumber;
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-// Retrieval functions
-void CompStoreObj::retrieve( QByteArray &array, const QString tag, const QString def, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    array = settings.value(tag, def).toByteArray();
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-void CompStoreObj::retrieve( QStringList &stringList, const QString tag, const QString def, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    stringList = settings.value(tag, def).toStringList();
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-void CompStoreObj::retrieve( QString &string, const QString tag, const QString def, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    string = settings.value(tag, def).toString();
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-void CompStoreObj::retrieve( bool &truth, const QString tag, const bool def, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    truth = settings.value(tag, def).toBool();
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-void CompStoreObj::retrieve( int &number, const QString tag, const int def, const QString group1, const QString group2 )
-{
-    QSettings settings(COMPANY, PRODUCT);
-    if (!group1.isEmpty()) settings.beginGroup(group1);
-    if (!group2.isEmpty()) settings.beginGroup(group2);
-
-    number = settings.value(tag, def).toInt();
-
-    if (!group1.isEmpty()) settings.endGroup();
-    if (!group2.isEmpty()) settings.endGroup();
-}
-
-// Retrieve and Store functions
-void CompStoreObj::getset( QByteArray &array, const QString tag, const QString def, const QString group1, const QString group2 )
-{
-    retrieve( array, tag, def, group1, group2);
-    store(array, array, tag, group1, group2);
-}
-
-void CompStoreObj::getset( QStringList &stringList, const QString tag, const QString def, const QString group1, const QString group2 )
-{
-    retrieve( stringList, tag, def, group1, group2);
-    store(stringList, stringList, tag, group1, group2);
-}
-
-void CompStoreObj::getset( QString &string, const QString tag, const QString def, const QString group1, const QString group2 )
-{
-    retrieve( string, tag, def, group1, group2);
-    store(string, string, tag, group1, group2);
-}
-
-void CompStoreObj::getset( bool &truth, const QString tag, const bool def, const QString group1, const QString group2 )
-{
-    retrieve( truth, tag, def, group1, group2);
-    store(truth, truth, tag, group1, group2);
-}
-
-void CompStoreObj::getset( int &number, const QString tag, const int def, const QString group1, const QString group2 )
-{
-    retrieve( number, tag, def, group1, group2);
-    store(number, number, tag, group1, group2);
-}
-
-// ** FwRevision class********************
-int FwRevision::get( const QString fwType )
-{
-    QString result;
-    retrieve( result, fwType, "", "FwRevisions" );
-    return result.toInt();
-}
-
-void FwRevision::set( const QString fwType, const int fwRevision )
-{
-    QString tempString = QString("%1").arg(fwRevision);
-    store( tempString, tempString, fwType, "FwRevisions" );
-}
-
-void FwRevision::remove( const QString tag )
-{
-    clear( "FwRevisions", tag );
-}
-
-// ** JStickData class********************
-// Get declarations
-int JStickData::stick_axe() { return _stickAxe; }
-int JStickData::stick_min() { return _stickMin; }
-int JStickData::stick_med() { return _stickMed; }
-int JStickData::stick_max() { return _stickMax; }
-int JStickData::stick_inv() { return _stickInv; }
-
-// Set declarations
-void JStickData::stick_axe(const int it) { store( it, _stickAxe, QString("stick%1_axe").arg(index), "JsCalibration" );}
-void JStickData::stick_min(const int it) { store( it, _stickMin, QString("stick%1_min").arg(index), "JsCalibration" );}
-void JStickData::stick_med(const int it) { store( it, _stickMed, QString("stick%1_med").arg(index), "JsCalibration" );}
-void JStickData::stick_max(const int it) { store( it, _stickMax, QString("stick%1_max").arg(index), "JsCalibration" );}
-void JStickData::stick_inv(const int it) { store( it, _stickInv, QString("stick%1_inv").arg(index), "JsCalibration" );}
-
-// Constructor
-JStickData::JStickData()
-{
-    index = -1;
-}
-
-void JStickData::remove()
-{
-    // Remove all JStickData values from settings file
-    QSettings settings(COMPANY, PRODUCT);
-    settings.beginGroup( "JsCalibration" );
-    settings.remove( QString( "stick%1_axe").arg(index) );
-    settings.remove( QString( "stick%1_min").arg(index) );
-    settings.remove( QString( "stick%1_med").arg(index) );
-    settings.remove( QString( "stick%1_max").arg(index) );
-    settings.remove( QString( "stick%1_inv").arg(index) );
-    settings.endGroup();
-
-    // Reset all JStickData variables to initial values
-    init(index);
-}
-
-bool JStickData::existsOnDisk()
-{
-    QSettings settings(COMPANY, PRODUCT);
-    settings.beginGroup("JsCalibration");
-    int axe = settings.value( QString("stick%1_axe").arg(index), -1 ).toInt();
-    settings.endGroup();
-
-    return (axe > -1);
-}
-
-void JStickData::init(int newIndex)
-{
-    index = newIndex;
-    _stickAxe = -1;
-    _stickMin = -32767;
-    _stickMed = 0;
-    _stickMax = 0;
-    _stickInv = 0;
-
-    // Do not write empty joystick calibrations to disk.
-    if ( !existsOnDisk() )
-        return;
-
-    flush();
-}
-
-void JStickData::flush()
-{
-    getset( _stickAxe, QString("stick%1_axe").arg(index), -1,     "JsCalibration" );
-    getset( _stickMin, QString("stick%1_min").arg(index), -32767, "JsCalibration" );
-    getset( _stickMed, QString("stick%1_med").arg(index),  0,     "JsCalibration" );
-    getset( _stickMax, QString("stick%1_max").arg(index),  0,     "JsCalibration" );
-    getset( _stickInv, QString("stick%1_inv").arg(index),  0,     "JsCalibration" );
-}
-
-// ** Profile class********************
-// Get declarations
-QString Profile::fwName()        const { return _fwName;        }
-QString Profile::fwType()        const { return _fwType;        }
-QString Profile::name()          const { return _name;          }
-QString Profile::sdPath()        const { return _sdPath;        }
-int     Profile::volumeGain()    const { return _volumeGain;    }
-QString Profile::pBackupDir()    const { return _pBackupDir;    }
-QString Profile::splashFile()    const { return _splashFile;    }
-bool    Profile::burnFirmware()  const { return _burnFirmware;  }
-bool    Profile::penableBackup() const { return _penableBackup; }
-bool    Profile::renameFwFiles() const { return _renameFwFiles; }
-int     Profile::channelOrder()  const { return _channelOrder;  }
-int     Profile::defaultMode()   const { return _defaultMode;   }
-
-QString Profile::beeper()        const { return _beeper;        }
-QString Profile::countryCode()   const { return _countryCode;   }
-QString Profile::display()       const { return _display;       }
-QString Profile::haptic()        const { return _haptic;        }
-QString Profile::speaker()       const { return _speaker;       }
-QString Profile::stickPotCalib() const { return _stickPotCalib; }
-QString Profile::timeStamp()     const { return _timeStamp;     }
-QString Profile::trainerCalib()  const { return _trainerCalib;  }
-QString Profile::controlTypes()  const { return _controlTypes;  }
-QString Profile::controlNames()  const { return _controlNames;  }
-int     Profile::txCurrentCalibration()  const { return _txCurrentCalibration;  }
-int     Profile::gsStickMode()   const { return _gsStickMode;   }
-int     Profile::ppmMultiplier() const { return _ppmMultiplier; }
-int     Profile::txVoltageCalibration()     const { return _txVoltageCalibration;     }
-int     Profile::vBatWarn()      const { return _vBatWarn;      }
-int     Profile::vBatMin()       const { return _vBatMin;       }
-int     Profile::vBatMax()       const { return _vBatMax;       }
-
-// Set declarations
-void Profile::name          (const QString x) { store(x, _name,          "Name"                  ,"Profiles", QString("profile%1").arg(index));}
-void Profile::fwName        (const QString x) { store(x, _fwName,        "fwName"                ,"Profiles", QString("profile%1").arg(index));}
-void Profile::fwType        (const QString x) { store(x, _fwType,        "fwType"                ,"Profiles", QString("profile%1").arg(index));}
-void Profile::sdPath        (const QString x) { store(x, _sdPath,        "sdPath"                ,"Profiles", QString("profile%1").arg(index));}
-void Profile::volumeGain    (const int     x) { store(x, _volumeGain,    "volumeGain"            ,"Profiles", QString("profile%1").arg(index));}
-void Profile::pBackupDir    (const QString x) { store(x, _pBackupDir,    "pBackupDir"            ,"Profiles", QString("profile%1").arg(index));}
-void Profile::splashFile    (const QString x) { store(x, _splashFile,    "SplashFileName"        ,"Profiles", QString("profile%1").arg(index));}
-void Profile::burnFirmware  (const bool    x) { store(x, _burnFirmware,  "burnFirmware"          ,"Profiles", QString("profile%1").arg(index));}
-void Profile::renameFwFiles (const bool    x) { store(x, _renameFwFiles, "rename_firmware_files" ,"Profiles", QString("profile%1").arg(index));}
-void Profile::penableBackup (const bool    x) { store(x, _penableBackup, "penableBackup"         ,"Profiles", QString("profile%1").arg(index));}
-void Profile::channelOrder  (const int     x) { store(x, _channelOrder,  "default_channel_order" ,"Profiles", QString("profile%1").arg(index));}
-void Profile::defaultMode   (const int     x) { store(x, _defaultMode,   "default_mode"          ,"Profiles", QString("profile%1").arg(index));}
-
-void Profile::beeper        (const QString x) { store(x, _beeper,        "Beeper"                ,"Profiles", QString("profile%1").arg(index));}
-void Profile::countryCode   (const QString x) { store(x, _countryCode,   "countryCode"           ,"Profiles", QString("profile%1").arg(index));}
-void Profile::display       (const QString x) { store(x, _display,       "Display"               ,"Profiles", QString("profile%1").arg(index));}
-void Profile::haptic        (const QString x) { store(x, _haptic,        "Haptic"                ,"Profiles", QString("profile%1").arg(index));}
-void Profile::speaker       (const QString x) { store(x, _speaker,       "Speaker"               ,"Profiles", QString("profile%1").arg(index));}
-void Profile::stickPotCalib (const QString x) { store(x, _stickPotCalib, "StickPotCalib"         ,"Profiles", QString("profile%1").arg(index));}
-void Profile::timeStamp     (const QString x) { store(x, _timeStamp,     "TimeStamp"             ,"Profiles", QString("profile%1").arg(index));}
-void Profile::trainerCalib  (const QString x) { store(x, _trainerCalib,  "TrainerCalib"          ,"Profiles", QString("profile%1").arg(index));}
-void Profile::controlTypes  (const QString x) { store(x, _controlTypes,  "ControlTypes"          ,"Profiles", QString("profile%1").arg(index));}
-void Profile::controlNames  (const QString x) { store(x, _controlNames,  "ControlNames"          ,"Profiles", QString("profile%1").arg(index));}
-void Profile::txCurrentCalibration  (const int x) { store(x, _txCurrentCalibration, "currentCalib","Profiles", QString("profile%1").arg(index));}
-void Profile::gsStickMode   (const int     x) { store(x, _gsStickMode,   "GSStickMode"           ,"Profiles", QString("profile%1").arg(index));}
-void Profile::ppmMultiplier (const int     x) { store(x, _ppmMultiplier, "PPM_Multiplier"        ,"Profiles", QString("profile%1").arg(index));}
-void Profile::txVoltageCalibration     (const int x) { store(x, _txVoltageCalibration, "VbatCalib","Profiles", QString("profile%1").arg(index));}
-void Profile::vBatWarn      (const int     x) { store(x, _vBatWarn,      "vBatWarn"              ,"Profiles", QString("profile%1").arg(index));}
-void Profile::vBatMin       (const int     x) { store(x, _vBatMin,       "VbatMin"               ,"Profiles", QString("profile%1").arg(index));}
-void Profile::vBatMax       (const int     x) { store(x, _vBatMax,       "VbatMax"               ,"Profiles", QString("profile%1").arg(index));}
-
-// Constructor
-Profile::Profile()
-{
-    index = -1;
-}
-
-// The default copy operator can not be used since the index variable would be destroyed
-Profile& Profile::operator=(const Profile& rhs)
-{
-    name         ( rhs.name()          );
-    fwName       ( rhs.fwName()        );
-    fwType       ( rhs.fwType()        );
-    sdPath       ( rhs.sdPath()        );
-    volumeGain   ( rhs.volumeGain()    );
-    pBackupDir   ( rhs.pBackupDir()    );
-    splashFile   ( rhs.splashFile()    );
-    burnFirmware ( rhs.burnFirmware()  );
-    renameFwFiles( rhs.renameFwFiles() );
-    penableBackup( rhs.penableBackup() );
-    channelOrder ( rhs.channelOrder()  );
-    defaultMode  ( rhs.defaultMode()   );
-    beeper       ( rhs.beeper()        );
-    countryCode  ( rhs.countryCode()   );
-    display      ( rhs.display()       );
-    haptic       ( rhs.haptic()        );
-    speaker      ( rhs.speaker()       );
-    stickPotCalib( rhs.stickPotCalib() );
-    trainerCalib ( rhs.trainerCalib()  );
-    controlTypes ( rhs.controlTypes()  );
-    controlNames ( rhs.controlNames()  );
-    txCurrentCalibration ( rhs.txCurrentCalibration()  );
-    gsStickMode  ( rhs.gsStickMode()   );
-    ppmMultiplier( rhs.ppmMultiplier() );
-    txVoltageCalibration    ( rhs.txVoltageCalibration()     );
-    vBatWarn     ( rhs.vBatWarn()      );
-    vBatMin      ( rhs.vBatMin()       );
-    vBatMax      ( rhs.vBatMax()       );
-
-    return *this;
-}
-
-void Profile::remove()
-{
-    // Remove all profile values from settings file
-    QSettings settings(COMPANY, PRODUCT);
-    settings.beginGroup("Profiles");
-    settings.remove(QString("profile%1").arg(index));
-    settings.endGroup();
-
-    // Reset all profile variables to initial values
-    init(index);
-}
-
-bool Profile::existsOnDisk()
-{
-    QSettings settings(COMPANY, PRODUCT);
-    settings.beginGroup("Profiles");
-    settings.beginGroup(QString("profile%1").arg(index));
-    QStringList keyList = settings.allKeys();
-    settings.endGroup();
-    settings.endGroup();
-
-    return (keyList.length() > 0);
-}
-
-void Profile::initFwVariables()
-{
-    _beeper =        "";
-    _countryCode =   "";
-    _display =       "";
-    _haptic =        "";
-    _speaker =       "";
-    _stickPotCalib = "";
-    _timeStamp =     "";
-    _trainerCalib =  "";
-    _controlTypes =  "";
-    _controlNames =  "";
-
-    _txCurrentCalibration =  0;
-    _gsStickMode =   0;
-    _ppmMultiplier = 0;
-    _txVoltageCalibration =     0;
-    _vBatWarn =      0;
-    _vBatMin =       0;
-    _vBatMax =       0;
-}
-
-void Profile::init(int newIndex)
-{
-    index = newIndex;
-
-    _fwName =        "";
-    _fwType =        "";
-    _name =          "";
-    _sdPath =        "";
-    _volumeGain =    10;
-    _pBackupDir =    "";
-    _splashFile =    "";
-    _burnFirmware =  false;
-    _renameFwFiles = false;
-    _penableBackup = false;
-    _channelOrder =  0;
-    _defaultMode =   1;
-
-    initFwVariables();
-
-    // Do not write empty profiles to disk except the default (0) profile.
-    if ( index > 0 && !existsOnDisk())
-        return;
-
-    flush();
-}
-
-void Profile::flush()
-{
-    // Load and store all variables. Use default values if setting values are missing
-    getset( _fwName,        "fwName"                ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _fwType,        "fwType"                ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _name,          "Name"                  ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _sdPath,        "sdPath"                ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _volumeGain,    "volumeGain"            ,10     ,"Profiles", QString("profile%1").arg(index));
-    getset( _pBackupDir,    "pBackupDir"            ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _splashFile,    "SplashFileName"        ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _burnFirmware,  "burnFirmware"          ,false  ,"Profiles", QString("profile%1").arg(index));
-    getset( _penableBackup, "penableBackup"         ,false  ,"Profiles", QString("profile%1").arg(index));
-    getset( _renameFwFiles, "rename_firmware_files" ,false  ,"Profiles", QString("profile%1").arg(index));
-    getset( _channelOrder,  "default_channel_order" ,0      ,"Profiles", QString("profile%1").arg(index));
-    getset( _defaultMode,   "default_mode"          ,1      ,"Profiles", QString("profile%1").arg(index));
-
-    getset( _beeper,        "Beeper"                ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _countryCode,   "countryCode"           ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _display,       "Display"               ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _haptic,        "Haptic"                ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _speaker,       "Speaker"               ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _stickPotCalib, "StickPotCalib"         ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _timeStamp,     "TimeStamp"             ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _trainerCalib,  "TrainerCalib"          ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _controlTypes,  "ControlTypes"          ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _controlNames,  "ControlNames"          ,""     ,"Profiles", QString("profile%1").arg(index));
-    getset( _txCurrentCalibration,  "currentCalib"          ,0      ,"Profiles", QString("profile%1").arg(index));
-    getset( _gsStickMode,   "GSStickMode"           ,0      ,"Profiles", QString("profile%1").arg(index));
-    getset( _ppmMultiplier, "PPM_Multiplier"        ,0      ,"Profiles", QString("profile%1").arg(index));
-    getset( _txVoltageCalibration,     "VbatCalib"             ,0      ,"Profiles", QString("profile%1").arg(index));
-    getset( _vBatWarn,      "vBatWarn"              ,0      ,"Profiles", QString("profile%1").arg(index));
-    getset( _vBatMin,       "VbatMin"               ,0      ,"Profiles", QString("profile%1").arg(index));
-    getset( _vBatMax,       "VbatMax"               ,0      ,"Profiles", QString("profile%1").arg(index));
-}
-
-
-// ** AppData class********************
-
-// Get declarations
-QStringList AppData::recentFiles() { return _recentFiles;     }
-QByteArray AppData::mainWinGeo()   { return _mainWinGeo;      }
-QByteArray AppData::mainWinState() { return _mainWinState;    }
-QByteArray AppData::modelEditGeo() { return _modelEditGeo;    }
-
-QString AppData::armMcu()          { return _armMcu;          }
-QString AppData::avrArguments()    { return _avrArguments;    }
-QString AppData::avrPort()         { return _avrPort;         }
-QString AppData::avrdudeLocation() { return _avrdudeLocation; }
-QString AppData::dfuArguments()    { return _dfuArguments;    }
-QString AppData::dfuLocation()     { return _dfuLocation;     }
-QString AppData::locale()          { return _locale;          }
-QString AppData::mcu()             { return _mcu;             }
-QString AppData::programmer()      { return _programmer;      }
-QString AppData::sambaLocation()   { return _sambaLocation;   }
-QString AppData::sambaPort()       { return _sambaPort;       }
-QString AppData::lastSimulator()   { return _lastSimulator;   }
-
-QString AppData::backupDir()       { return _backupDir;       }
-QString AppData::gePath()          { return _gePath;          }
-QString AppData::eepromDir()       { return _eepromDir;       }
-QString AppData::flashDir()        { return _flashDir;        }
-QString AppData::imagesDir()       { return _imagesDir;       }
-QString AppData::logDir()          { return _logDir;          }
-QString AppData::libDir()          { return _libDir;          }
-QString AppData::snapshotDir()     { return _snapshotDir;     }
-QString AppData::updatesDir()      { return _updatesDir;      }
-
-bool AppData::jsSupport()          { return _jsSupport;       }
-bool AppData::maximized()          { return _maximized;       }
-bool AppData::showSplash()         { return _showSplash;      }
-bool AppData::snapToClpbrd()       { return _snapToClpbrd;    }
-bool AppData::autoCheckApp()       { return _autoCheckApp;    }
-bool AppData::autoCheckFw()        { return _autoCheckFw;     }
-bool AppData::simuSW()             { return _simuSW;          }
-bool AppData::useWizard()          { return _useWizard;       }
-
-int AppData::backLight()           { return _backLight;       }
-int AppData::embedSplashes()       { return _embedSplashes;   }
-int AppData::fwServerFails()       { return _fwServerFails;   }
-int AppData::generalEditTab()      { return _generalEditTab;  }
-int AppData::iconSize()            { return _iconSize;        }
-int AppData::historySize()         { return _historySize;     }
-int AppData::jsCtrl()              { return _jsCtrl;          }
-int AppData::id()                  { return _id;              }
-int AppData::theme()               { return _theme;           }
-int AppData::warningId()           { return _warningId;       }
-
-// Set declarations
-void AppData::recentFiles     (const QStringList x) { store(x, _recentFiles,     "recentFileList"          );}
-void AppData::mainWinGeo      (const QByteArray  x) { store(x, _mainWinGeo,      "mainWindowGeometry"      );}
-void AppData::mainWinState    (const QByteArray  x) { store(x, _mainWinState,    "mainWindowState"         );}
-void AppData::modelEditGeo    (const QByteArray  x) { store(x, _modelEditGeo,    "modelEditGeometry"       );}
-
-void AppData::armMcu          (const QString     x) { store(x, _armMcu,          "arm_mcu"                 );}
-void AppData::avrArguments    (const QString     x) { store(x, _avrArguments,    "avr_arguments"           );}
-void AppData::avrPort         (const QString     x) { store(x, _avrPort,         "avr_port"                );}
-void AppData::avrdudeLocation (const QString     x) { store(x, _avrdudeLocation, "avrdudeLocation"         );}
-void AppData::dfuArguments    (const QString     x) { store(x, _dfuArguments,    "dfu_arguments"           );}
-void AppData::dfuLocation     (const QString     x) { store(x, _dfuLocation,     "dfu_location"            );}
-void AppData::locale          (const QString     x) { store(x, _locale,          "locale"                  );}
-void AppData::mcu             (const QString     x) { store(x, _mcu,             "mcu"                     );}
-void AppData::programmer      (const QString     x) { store(x, _programmer,      "programmer"              );}
-void AppData::sambaLocation   (const QString     x) { store(x, _sambaLocation,   "samba_location"          );}
-void AppData::sambaPort       (const QString     x) { store(x, _sambaPort,       "samba_port"              );}
-void AppData::lastSimulator   (const QString     x) { store(x, _lastSimulator,   "last_simulator"          );}
-
-void AppData::backupDir       (const QString     x) { store(x, _backupDir,       "backupPath"              );}
-void AppData::gePath          (const QString     x) { store(x, _gePath,          "gePath"                  );}
-void AppData::eepromDir       (const QString     x) { store(x, _eepromDir,       "lastDir"                 );}
-void AppData::flashDir        (const QString     x) { store(x, _flashDir,        "lastFlashDir"            );}
-void AppData::imagesDir       (const QString     x) { store(x, _imagesDir,       "lastImagesDir"           );}
-void AppData::logDir          (const QString     x) { store(x, _logDir,          "lastLogDir"              );}
-void AppData::libDir          (const QString     x) { store(x, _libDir,          "libraryPath"             );}
-void AppData::snapshotDir     (const QString     x) { store(x, _snapshotDir,     "snapshotpath"            );}
-void AppData::updatesDir      (const QString     x) { store(x, _updatesDir,      "lastUpdatesDir"          );}
-
-void AppData::maximized       (const bool        x) { store(x, _maximized,       "maximized"               );}
-void AppData::jsSupport       (const bool        x) { store(x, _jsSupport,       "js_support"              );}
-void AppData::showSplash      (const bool        x) { store(x, _showSplash,      "show_splash"             );}
-void AppData::snapToClpbrd    (const bool        x) { store(x, _snapToClpbrd,    "snapshot_to_clipboard"   );}
-void AppData::autoCheckApp    (const bool        x) { store(x, _autoCheckApp,    "startup_check_companion" );}
-void AppData::autoCheckFw     (const bool        x) { store(x, _autoCheckFw,     "startup_check_fw"        );}
-void AppData::simuSW          (const bool        x) { store(x, _simuSW,          "simuSW"                  );}
-void AppData::useWizard       (const bool        x) { store(x, _useWizard,       "useWizard"               );}
-
-void AppData::backLight       (const int         x) { store(x, _backLight,       "backLight"               );}
-void AppData::embedSplashes   (const int         x) { store(x, _embedSplashes,   "embedded_splashes"       );}
-void AppData::fwServerFails   (const int         x) { store(x, _fwServerFails,   "fwserver"                );}
-void AppData::generalEditTab  (const int         x) { store(x, _generalEditTab,  "generalEditTab"          );}
-void AppData::iconSize        (const int         x) { store(x, _iconSize,        "icon_size"               );}
-void AppData::historySize     (const int         x) { store(x, _historySize,     "history_size"            );}
-void AppData::jsCtrl          (const int         x) { store(x, _jsCtrl,          "js_ctrl"                 );}
-void AppData::id              (const int         x) { store(x, _id,              "profileId"               );}
-void AppData::theme           (const int         x) { store(x, _theme,           "theme"                   );}
-void AppData::warningId       (const int         x) { store(x, _warningId,       "warningId"               );}
-
-// Constructor
-AppData::AppData()
-{
-}
-
-void AppData::init()
-{
-    //Initialize the profiles
-    for (int i=0; i<MAX_PROFILES; i++)
-        profile[i].init( i );
-
-    //Initialize the joysticks
-    for (int i=0; i<MAX_JOYSTICKS; i++)
-        joystick[i].init( i );
-
-    QSettings settings(COMPANY, PRODUCT);
-
-    // Copy existing 2.1 settings if present
-    if (profile[0].name().isEmpty())
-    {
-        QSettings settings21("OpenTX", "Companion 2.1");
-
-        QStringList keys = settings21.allKeys();
-        for (QStringList::iterator i=keys.begin(); i!=keys.end(); i++)
-        {
-            if (settings21.value(*i) != QString("") && settings21.value(*i) != QString("Start Menu Folder"))
-            {
-                settings.setValue(*i, settings21.value(*i));
-            }
-        }
-
-        //Reload profiles
-        for (int i=0; i<MAX_PROFILES; i++)
-            profile[i].init( i );
-    }
-
-    // Copy existing 2.0 settings if present
-    if (profile[0].name().isEmpty())
-    {
-        QSettings settings20("OpenTX", "Companion 2.0");
-
-        QStringList keys = settings20.allKeys();
-        for (QStringList::iterator i=keys.begin(); i!=keys.end(); i++)
-        {
-            if (settings20.value(*i) != QString("") && settings20.value(*i) != QString("Start Menu Folder"))
-            {
-                settings.setValue(*i, settings20.value(*i));
-            }
-        }
-
-        //Reload profiles
-        for (int i=0; i<MAX_PROFILES; i++)
-            profile[i].init( i );
-    }
-
-    // Else copy existing <2.0.16 settings if present
-    if (profile[0].name().isEmpty())
-    {
-        QSettings pre2016settings("OpenTX", "OpenTX Companion");
-
-        QStringList keys = pre2016settings.allKeys();
-        for (QStringList::iterator i=keys.begin(); i!=keys.end(); i++)
-        {
-            if (pre2016settings.value(*i) != QString("") && pre2016settings.value(*i) != QString("Start Menu Folder"))
-            {
-                settings.setValue(*i, pre2016settings.value(*i));
-            }
-        }
-
-        //Reload profiles
-        for (int i=0; i<MAX_PROFILES; i++)
-            profile[i].init( i );
-    }
-
-    // Else import settings from companion9x if present
-    if (profile[0].name().isEmpty())
-    {
-        QSettings c9x_settings("companion9x", "companion9x");
-        // Copy all settings from companion9x to companion
-        QStringList keys = c9x_settings.allKeys();
-        for (QStringList::iterator i=keys.begin(); i!=keys.end(); i++)
-        {
-            settings.setValue(*i, c9x_settings.value(*i));
-        }
-
-        // Store old values in new locations
-        autoCheckApp(settings.value("startup_check_companion9x", true).toBool());
-        useWizard(settings.value("wizardEnable", true).toBool());
-
-        // Convert and store the firmware type
-        QString fwType  = settings.value("firmware", "").toString();
-        fwType.replace("open9x","opentx");
-        fwType.replace("x9da","taranis");
-        profile[0].fwType( fwType );
-
-        // Move the Companion9x profile settings to profile0, the new default profile
-        profile[0].name( settings.value(          "Name",                  ""    ).toString());
-        profile[0].sdPath( settings.value(        "sdPath",                ""    ).toString());
-        profile[0].splashFile( settings.value(    "SplashFileName",        ""    ).toString());
-        profile[0].burnFirmware( settings.value(  "burnFirmware",          false ).toBool());
-        profile[0].renameFwFiles( settings.value( "rename_firmware_files", false ).toBool());
-        profile[0].channelOrder( settings.value(  "default_channel_order", "0"   ).toInt());
-        profile[0].defaultMode( settings.value(   "default_mode",          "1"   ).toInt());
-
-        // Ensure that the default profile has a name
-        if ( profile[0].name().isEmpty() )
-            profile[0].name("My Radio");
-
-        // Delete obsolete settings fields from companion9x
-        settings.remove("ActiveProfile");
-        settings.remove("burnFirmware");
-        settings.remove("custom_id");
-        settings.remove("default_channel_order");
-        settings.remove("default_mode");
-        settings.remove("firmware");
-        settings.remove("lastFw");
-        settings.remove("modelEditTab");
-        settings.remove("Name");
-        settings.remove("patchImage");
-        settings.remove("rename_firmware_files");
-        settings.remove("sdPath");
-        settings.remove("SplashFileName");
-        settings.remove("startup_check_companion9x");
-        settings.remove("wizardEnable");
-
-        // Delete settings that we do not want to carry over from 1.52
-        settings.remove("dfu_location");
-
-        // Select the new default profile as current profile
-        id( 0 );
-    }
-
-    // Remove settings that have been made obsolete during companion2.0 development
-    settings.remove("compilation-server");
-
-    // Load and store all variables. Use default values if setting values are missing
-    QString _tempString;                                          // Do not touch. Do not change the settings version before a new verson update!
-    getset( _tempString,      "settings_version"        ,"220" ); // This is a version marker. Will be used to upgrade the settings later on.
-
-    getset( _recentFiles,     "recentFileList"          ,"" );
-    getset( _mainWinGeo,      "mainWindowGeometry"      ,"" );
-    getset( _mainWinState,    "mainWindowState"         ,"" );
-    getset( _modelEditGeo,    "modelEditGeometry"       ,"" );
-
-    getset( _armMcu,          "arm_mcu"                 ,"at91sam3s4-9x" );
-    getset( _avrArguments,    "avr_arguments"           ,"" );
-    getset( _avrPort,         "avr_port"                ,"" );
-    getset( _avrdudeLocation, "avrdudeLocation"        ,"" );
-    getset( _dfuArguments,    "dfu_arguments"           ,"-a 0" );
-    getset( _dfuLocation,     "dfu_location"            ,"" );
-    getset( _locale,          "locale"                  ,"" );
-    getset( _mcu,             "mcu"                     ,"m64" );
-    getset( _programmer,      "programmer"              ,"usbasp" );
-    getset( _sambaLocation,   "samba_location"          ,"" );
-    getset( _sambaPort,       "samba_port"              ,"\\USBserial\\COM23" );
-    getset( _lastSimulator,   "last_simulator"          ,"" );
-
-    getset( _backupDir,       "backupPath"              ,"" );
-    getset( _gePath,          "gePath"                  ,"" );
-    getset( _eepromDir,       "lastDir"                 ,"" );
-    getset( _flashDir,        "lastFlashDir"            ,"" );
-    getset( _imagesDir,       "lastImagesDir"           ,"" );
-    getset( _logDir,          "lastLogDir"              ,"" );
-    getset( _libDir,          "libraryPath"             ,"" );
-    getset( _snapshotDir,     "snapshotpath"            ,"" );
-    getset( _updatesDir,      "lastUpdatesDir"          ,"" );
-
-    getset( _outputDisplayDetails,  "outputDisplayDetails"     ,false );
-    getset( _enableBackup,    "enableBackup"            ,false );
-    getset( _backupOnFlash,   "backupOnFlash"           ,true  );
-    getset( _checkHardwareCompatibility,   "checkHardwareCompatibility"           ,true  );
-
-    getset( _useCompanionNightlyBuilds,   "useCompanionNightlyBuilds"           ,false  );
-    getset( _useFirmwareNightlyBuilds,   "useFirmwareNightlyBuilds"           ,false  );
-
-    getset( _jsSupport,       "js_support"              ,false );
-    getset( _maximized,       "maximized"               ,false );
-    getset( _showSplash,      "show_splash"             ,true  );
-    getset( _snapToClpbrd,    "snapshot_to_clipboard"   ,false );
-    getset( _autoCheckApp,    "startup_check_companion" ,true  );
-    getset( _autoCheckFw,     "startup_check_fw"        ,true  );
-    getset( _simuSW,          "simuSW"                  ,false );
-    getset( _useWizard,       "useWizard"               ,true  );
-
-    getset( _backLight,       "backLight"               ,0  );
-    getset( _embedSplashes,   "embedded_splashes"       ,0  );
-    getset( _fwServerFails,   "fwserver"                ,0  );
-    getset( _generalEditTab,  "generalEditTab"          ,0  );
-    getset( _iconSize,        "icon_size"               ,2  );
-    getset( _jsCtrl,          "js_ctrl"                 ,0  );
-    getset( _historySize,     "history_size"            ,10 );
-    getset( _id,              "profileId"               ,0  );
-    getset( _theme,           "theme"                   ,1  );
-    getset( _warningId,       "warningId"               ,0  );
-}

companion/src/appdata.h

@@ -1,392 +0,0 @@
-/*
- * Author - Kjell Kernen
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-// All temporary and permanent global variables are defined here to make
-// initialization and storage safe and visible.
-// Do not access variables in QSettings directly, it is not type safe!
-
-
-#ifndef COMPANION_APPDATA_H
-#define COMPANION_APPDATA_H
-#include <QByteArray>
-#include <QStringList>
-#include <QString>
-#include <QSettings>
-
-#define COMPANY "OpenTX"
-#define PRODUCT "Companion 2.2"
-
-#define MAX_PROFILES 15
-#define MAX_JOYSTICKS 8
-
-class CompStoreObj
-{
-  public:
-    void clear (const QString tag1="", const QString tag2="", const QString tag3="");
-    void store(const QByteArray newArray, QByteArray &array, const QString tag, const QString group1="", const QString group2="" );
-    void store(const QStringList newSList, QStringList &stringList, const QString tag, const QString group1="", const QString group2="" );
-    void store(const QString newString, QString &string, const QString tag, const QString group1="", const QString group2="" );
-    void store(const bool newTruth, bool &truth, const QString tag, const QString group1="", const QString group2="" );
-    void store(const int newNumber, int &number, const QString tag, const QString group1="", const QString group2="" );
-
-    // Retrieval functions
-    void retrieve( QByteArray &array, const QString tag, const QString def, const QString group1="", const QString group2="" );
-    void retrieve( QStringList &stringList, const QString tag, const QString def, const QString group1="", const QString group2="" );
-    void retrieve( QString &string, const QString tag, const QString def, const QString group1="", const QString group2="" );
-    void retrieve( bool &truth, const QString tag, const bool def, const QString group1="", const QString group2="" );
-    void retrieve( int &number, const QString tag, const int def, const QString group1="", const QString group2="" );
-
-    // Retrieve and Store functions
-    void getset( QByteArray &array, const QString tag, const QString def, const QString group1="", const QString group2="" );
-    void getset( QStringList &stringList, const QString tag, const QString def, const QString group1="", const QString group2="" );
-    void getset( QString &string, const QString tag, const QString def, const QString group1="", const QString group2="" );
-    void getset( bool &truth, const QString tag, const bool def, const QString group1="", const QString group2="" );
-    void getset( int &number, const QString tag, const int def, const QString group1="", const QString group2="" );
-};
-
-class FwRevision: protected CompStoreObj
-{
-  public:
-    int get( const QString);
-    void set( const QString, const int );
-    void remove( const QString );
-};
-
-class JStickData: protected CompStoreObj
-{
-  private:
-    int index;
-
-    int _stickAxe;
-    int _stickMin;
-    int _stickMed;
-    int _stickMax;
-    int _stickInv;
-
-  public:
-    // All the get definitions
-    int stick_axe();
-    int stick_min();
-    int stick_med();
-    int stick_max();
-    int stick_inv();
-
-    // All the set definitions
-    void stick_axe(const int);
-    void stick_min(const int);
-    void stick_med(const int);
-    void stick_max(const int);
-    void stick_inv(const int);
-
-    JStickData();
-    void remove();
-    bool existsOnDisk();
-    void init(int index);
-    void flush();
-};
-
-class Profile: protected CompStoreObj
-{
-  private:
-    // Class Internal Variable
-    int index;
-
-    // Application Variables
-    QString _fwName;
-    QString _fwType;
-    QString _name;
-    QString _sdPath;
-    int     _volumeGain;
-    QString _pBackupDir;
-    QString _splashFile;
-    bool    _burnFirmware;
-    bool    _penableBackup;
-    bool    _renameFwFiles;
-    int     _channelOrder;
-    int     _defaultMode;
-
-    // Firmware Variables
-    QString _beeper;
-    QString _countryCode;
-    QString _display;
-    QString _haptic;
-    QString _speaker;
-    QString _stickPotCalib;
-    QString _timeStamp;
-    QString _trainerCalib;
-    QString _controlTypes;
-    QString _controlNames;
-    int     _txCurrentCalibration;
-    int     _gsStickMode;
-    int     _ppmMultiplier;
-    int     _txVoltageCalibration;
-    int     _vBatWarn;
-    int     _vBatMin;
-    int     _vBatMax;
-
-  public:
-    // All the get definitions
-    QString fwName() const;
-    QString fwType() const;
-    QString name() const;
-    QString sdPath() const;
-    int     volumeGain() const;
-    QString pBackupDir() const;
-    QString splashFile() const;
-    bool    burnFirmware() const;
-    bool    renameFwFiles() const;
-    bool    penableBackup() const;
-    int     channelOrder() const;
-    int     defaultMode() const;
-
-    QString beeper() const;
-    QString countryCode() const;
-    QString display() const;
-    QString haptic() const;
-    QString speaker() const;
-    QString stickPotCalib() const;
-    QString timeStamp() const;
-    QString trainerCalib() const;
-    QString controlTypes() const;
-    QString controlNames() const;
-    int     txCurrentCalibration() const;
-    int     gsStickMode() const;
-    int     ppmMultiplier() const;
-    int     txVoltageCalibration() const;
-    int     vBatWarn() const;
-    int     vBatMin() const;
-    int     vBatMax() const;
-
-    // All the set definitions
-    void name          (const QString);
-    void fwName        (const QString);
-    void fwType        (const QString);
-    void volumeGain    (const int);
-    void sdPath        (const QString);
-    void pBackupDir    (const QString);
-    void splashFile    (const QString);
-    void burnFirmware  (const bool);
-    void renameFwFiles (const bool);
-    void penableBackup (const bool);
-    void channelOrder  (const int);
-    void defaultMode   (const int);
-
-    void beeper        (const QString);
-    void countryCode   (const QString);
-    void display       (const QString);
-    void haptic        (const QString);
-    void speaker       (const QString);
-    void stickPotCalib (const QString);
-    void timeStamp     (const QString);
-    void trainerCalib  (const QString);
-    void controlTypes  (const QString);
-    void controlNames  (const QString);
-    void txCurrentCalibration  (const int);
-    void gsStickMode   (const int);
-    void ppmMultiplier (const int);
-    void txVoltageCalibration     (const int);
-    void vBatWarn      (const int);
-    void vBatMin       (const int);
-    void vBatMax       (const int);
-
-    Profile();
-    Profile& operator=(const Profile&);
-    void remove();
-    bool existsOnDisk();
-    void init(int newIndex);
-    void initFwVariables();
-    void flush();
-};
-
-#define BOOL_PROPERTY(name, dflt)                                   \
-    public:                                                         \
-      inline bool name() { return _ ## name; }                      \
-      void name(const bool val) { store(val, _ ## name, # name); }  \
-    private:                                                        \
-      bool _ ## name;
-
-class AppData: protected CompStoreObj
-{
-  BOOL_PROPERTY(enableBackup, false)
-  BOOL_PROPERTY(outputDisplayDetails, false)
-  BOOL_PROPERTY(backupOnFlash, true)
-  BOOL_PROPERTY(checkHardwareCompatibility, true)
-  BOOL_PROPERTY(useCompanionNightlyBuilds, false)
-  BOOL_PROPERTY(useFirmwareNightlyBuilds, false)
-
-  // All the global variables
-  public:
-    Profile    profile[MAX_PROFILES];
-    JStickData joystick[MAX_JOYSTICKS];
-    FwRevision fwRev;
-
-  private:
-    QStringList _recentFiles;
-    QByteArray _mainWinGeo;
-    QByteArray _mainWinState;
-    QByteArray _modelEditGeo;
-
-    QString _armMcu;
-    QString _avrArguments;
-    QString _avrPort;
-    QString _avrdudeLocation;
-    QString _dfuArguments;
-    QString _dfuLocation;
-    QString _locale;
-    QString _mcu;
-    QString _programmer;
-    QString _sambaLocation;
-    QString _sambaPort;
-    QString _lastSimulator;
-
-    QString _backupDir;
-    QString _gePath;
-    QString _eepromDir;
-    QString _flashDir;
-    QString _imagesDir;
-    QString _logDir;
-    QString _libDir;
-    QString _snapshotDir;
-    QString _updatesDir;
-
-    bool _maximized;
-    bool _jsSupport;
-    bool _showSplash;
-    bool _snapToClpbrd;
-    bool _autoCheckApp;
-    bool _autoCheckFw;
-    bool _simuSW;
-    bool _useWizard;
-
-    int _backLight;
-    int _embedSplashes;
-    int _fwServerFails;
-    int _generalEditTab;
-    int _iconSize;
-    int _jsCtrl;
-    int _historySize;
-    int _id;
-    int _theme;
-    int _warningId;
-
-  public:
-    // All the get definitions
-    QStringList recentFiles();
-    QByteArray mainWinGeo();
-    QByteArray mainWinState();
-    QByteArray modelEditGeo();
-
-    QString armMcu();
-    QString avrArguments();
-    QString avrPort();
-    QString avrdudeLocation();
-    QString dfuArguments();
-    QString dfuLocation();
-    QString lastFw();
-    QString locale();
-    QString mcu();
-    QString programmer();
-    QString sambaLocation();
-    QString sambaPort();
-    QString lastSimulator();
-
-    QString backupDir();
-    QString gePath();
-    QString eepromDir();
-    QString flashDir();
-    QString imagesDir();
-    QString logDir();
-    QString libDir();
-    QString snapshotDir();
-    QString updatesDir();
-
-    bool jsSupport();
-    bool maximized();
-    bool showSplash();
-    bool snapToClpbrd();
-    bool autoCheckApp();
-    bool autoCheckFw();
-    bool simuSW();
-    bool useWizard();
-
-    int backLight();
-    int embedSplashes();
-    int fwServerFails();
-    int generalEditTab();
-    int iconSize();
-    int historySize();
-    int jsCtrl();
-    int id();
-    int theme();
-    int warningId();
-
-    // All the set definitions
-    void recentFiles     (const QStringList x);
-    void mainWinGeo      (const QByteArray);
-    void mainWinState    (const QByteArray);
-    void modelEditGeo    (const QByteArray);
-
-    void armMcu          (const QString);
-    void avrArguments    (const QString);
-    void avrPort         (const QString);
-    void avrdudeLocation (const QString);
-    void dfuArguments    (const QString);
-    void dfuLocation     (const QString);
-    void lastFw          (const QString);
-    void locale          (const QString);
-    void mcu             (const QString);
-    void programmer      (const QString);
-    void sambaLocation   (const QString);
-    void sambaPort       (const QString);
-    void lastSimulator   (const QString);
-
-    void backupDir       (const QString);
-    void gePath          (const QString);
-    void eepromDir       (const QString);
-    void flashDir        (const QString);
-    void imagesDir       (const QString);
-    void logDir          (const QString);
-    void libDir          (const QString);
-    void snapshotDir     (const QString);
-    void updatesDir      (const QString);
-
-    void maximized       (const bool);
-    void jsSupport       (const bool);
-    void showSplash      (const bool);
-    void snapToClpbrd    (const bool);
-    void autoCheckApp    (const bool);
-    void autoCheckFw     (const bool);
-    void simuSW          (const bool);
-    void useWizard       (const bool);
-
-    void backLight       (const int);
-    void embedSplashes   (const int);
-    void fwServerFails   (const int);
-    void generalEditTab  (const int);
-    void iconSize        (const int);
-    void historySize     (const int);
-    void jsCtrl          (const int);
-    void modelEditTab    (const int);
-    void id              (const int);
-    void theme           (const int);
-    void warningId       (const int);
-
-    // Constructor
-    AppData();
-    void init();
-};
-
-extern AppData g;
-
-#endif // COMPANION_APPDATA_H

companion/src/appdebugmessagehandler.cpp

@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "appdebugmessagehandler.h"
+
+#include <QFileDevice>
+
+AppDebugMessageHandler::AppDebugMessageHandler(QObject * parent) :
+  QObject(parent),
+  m_appDebugOutputLevel(APP_DBG_HANDLER_DEFAULT_LEVEL),
+  m_showSourcePath(APP_DBG_HANDLER_SHOW_SRC_PATH),
+  m_showFunctionDeclarations(APP_DBG_HANDLER_SHOW_FUNCTION_DECL)
+{
+  m_srcPathFilter = QRegularExpression("^" APP_DBG_HANDLER_SRC_PATH "[\\\\\\/](.*?)$", QRegularExpression::InvertedGreedinessOption);
+  m_functionFilter = QRegularExpression("^.+?(\\w+\\().+$");
+}
+
+AppDebugMessageHandler * AppDebugMessageHandler::instance()
+{
+  static AppDebugMessageHandler * _instance = NULL;
+#if APP_DBG_HANDLER_ENABLE
+  if(_instance == NULL && !qApp->closingDown())
+    _instance = new AppDebugMessageHandler(qApp);  // Ensure this object is cleaned up when the QApplication exits.
+#endif
+  return _instance;
+}
+
+void AppDebugMessageHandler::setAppDebugOutputLevel(const quint8 & appDebugOutputLevel)
+{
+  m_appDebugOutputLevel = appDebugOutputLevel;
+}
+
+void AppDebugMessageHandler::setShowSourcePath(bool showSourcePath)
+{
+  m_showSourcePath = showSourcePath;
+}
+
+void AppDebugMessageHandler::setShowFunctionDeclarations(bool showFunctionDeclarations)
+{
+  m_showFunctionDeclarations = showFunctionDeclarations;
+}
+
+void AppDebugMessageHandler::addOutputDevice(QIODevice * device)
+{
+  if (device && !m_outputDevices.contains(device))
+    m_outputDevices.append(device);
+}
+
+void AppDebugMessageHandler::removeOutputDevice(QIODevice * device)
+{
+  if (device) {
+    // no QVector::removeAll() in Qt < 5.4
+    int i = 0;
+    foreach (QIODevice * d, m_outputDevices) {
+      if (d == device)
+        m_outputDevices.remove(i);
+      ++i;
+    }
+  }
+}
+
+void AppDebugMessageHandler::installAppMessageHandler()
+{
+  m_defaultHandler = qInstallMessageHandler(g_appDebugMessageHandler);
+}
+
+void AppDebugMessageHandler::messageHandler(QtMsgType type, const QMessageLogContext & context, const QString & msg)
+{
+  static const char symbols[] = { 'D', 'W', 'E', 'X', 'I' };  // correspond to QtMsgType enum
+  // normalize types, QtDebugMsg stays 0, QtInfoMsg becomes 1, rest are QtMsgType + 1
+  quint8 lvl = type;
+  if (type == QtInfoMsg)
+    lvl = 1;
+  else if (type > QtDebugMsg)
+    ++lvl;
+
+  if (lvl < m_appDebugOutputLevel && type != QtFatalMsg)
+    return;
+
+#if defined(Q_OS_LINUX) && (QT_VERSION < QT_VERSION_CHECK(5, 3, 0))
+  // Filter out lots of QPainter warnings from undocked QDockWidgets... hackish but effective (only workaround found so far)
+  if (lvl == 2 && QString(context.function).contains("QPainter::"))
+    return;
+#endif
+
+  QString msgPattern = QString("[%1] ").arg(symbols[type]);
+
+  if (m_showSourcePath) {
+    QString file = QString("%1::").arg(context.file);
+    file.replace(m_srcPathFilter, "\\1");
+    msgPattern.append(file);
+  }
+  if (m_showFunctionDeclarations)
+    msgPattern.append(context.function);
+  else
+    msgPattern.append("%{function}()");
+
+  msgPattern.append(":%{line} -%{if-category} [%{category}]%{endif} %{message}");
+
+  if (type == QtFatalMsg)
+    msgPattern.append("\nBACKTRACE:\n%{backtrace depth=12 separator=\"\n\"}");
+
+  qSetMessagePattern(msgPattern);
+
+  if (!m_defaultHandler || m_outputDevices.size() || receivers(SIGNAL(messageOutput(quint8, const QString &)))) {
+#if (QT_VERSION >= QT_VERSION_CHECK(5, 4, 0))
+    msgPattern = qFormatLogMessage(type, context, msg);
+#else
+    msgPattern.replace("%{line}", QString::number(context.line));
+    msgPattern.replace("%{if-category} [%{category}]%{endif}", QString(context.category));
+    msgPattern.replace("%{message}", msg);
+    if (!m_showFunctionDeclarations) {
+      QString func = context.function;
+      msgPattern.replace("%{function}", func.replace(m_functionFilter, "\\1)"));
+    }
+#endif
+
+    emit messageOutput(lvl, msgPattern);
+
+    foreach (QIODevice * d, m_outputDevices) {
+      if (d && d->isWritable() && (!d->property("level").isValid() || d->property("level").toInt() <= lvl)) {
+        d->write(qPrintable(msgPattern % "\n"));
+        if (QFileDevice * fd = qobject_cast<QFileDevice *>(d))
+          fd->flush();
+      }
+    }
+  }
+
+  // if (QThread::currentThread() == qApp->thread())  // gui thread
+
+  if (m_defaultHandler) {
+    m_defaultHandler(type, context, msg);
+  }
+  else {
+    fprintf(stderr, "%s", qPrintable(msgPattern));
+    if (type == QtFatalMsg)
+      abort();
+  }
+}
+
+// Message handler which is installed using qInstallMessageHandler. This needs to be global.
+void g_appDebugMessageHandler(QtMsgType type, const QMessageLogContext &context, const QString &msg)
+{
+  if (AppDebugMessageHandler::instance())
+    AppDebugMessageHandler::instance()->messageHandler(type, context, msg);
+}

companion/src/appdebugmessagehandler.h

@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef APPDEBUGMESSAGEHANDLER_H
+#define APPDEBUGMESSAGEHANDLER_H
+
+#include <cstdlib>
+#include <iostream>
+
+#include <QApplication>
+#include <QDebug>
+#include <QIODevice>
+#include <QMessageLogContext>
+#include <QObject>
+#include <QRegularExpression>
+#include <QString>
+
+/*
+ * Custom debug/message handler class to work in conjunction with qDebug() family of functions.
+ * Formats all stderr output generated by the application in a consistent manner.
+ * It can also be used by other event listeners to intercept messages they may be interested in (connect to messageOutput() signal).
+ *
+ * Include this header to use qInfo() safely with Qt < v5.5 (qInfo becomes alias for qDebug).
+ *
+ * Note that the default message format can still be overriden by setting QT_MESSAGE_PATTERN environment variable at _runtime_.
+ *   see: https://doc.qt.io/qt-5/qtglobal.html#qSetMessagePattern
+ *
+ * This is an app-wide "global" thread-safe singleton class, use it with AppDebugMessageHandler::instance().
+ *   For example, at start of application:
+ *
+ *     QApplication app(argc, argv);
+ *     AppDebugMessageHandler::instance()->installAppMessageHandler();
+ *
+ *  To connect to a signal:
+ *
+ *    connect(AppDebugMessageHandler::instance(), &AppDebugMessageHandler::messageOutput, this, &DebugOutput::onAppDebugMessage);
+ *
+ * This singleton will self-destruct upon QApplication termination.
+ *
+ */
+
+#if defined(QT_DEBUG) || defined(DEBUG)
+  #define APP_DBG_HANDLER_IS_DBG_BUILD          1
+#else
+  #define APP_DBG_HANDLER_IS_DBG_BUILD          0
+#endif
+
+// Enable/disable this custom handler handler entirely
+#ifndef APP_DBG_HANDLER_ENABLE
+  #define APP_DBG_HANDLER_ENABLE                1
+#endif
+
+// Default log level (can also be set with setAppDebugOutputLevel()):
+//   0 = debug+; 1 = info+; 2 = warn+; 3 = critical+; 4 = fatal only
+#ifndef APP_DBG_HANDLER_DEFAULT_LEVEL
+  #define APP_DBG_HANDLER_DEFAULT_LEVEL         0
+#endif
+
+// Include source file path/name in output (filtered with APP_DBG_HANDLER_SRC_PATH)
+#ifndef APP_DBG_HANDLER_SHOW_SRC_PATH
+  #define APP_DBG_HANDLER_SHOW_SRC_PATH         APP_DBG_HANDLER_IS_DBG_BUILD
+#endif
+
+// Show just the function Class::name vs. full declaration with return and param types
+#ifndef APP_DBG_HANDLER_SHOW_FUNCTION_DECL
+  #define APP_DBG_HANDLER_SHOW_FUNCTION_DECL    0
+#endif
+
+// base path for source file name filter, everything after this is kept; RegEx, non-greedy
+#ifndef APP_DBG_HANDLER_SRC_PATH
+  #define APP_DBG_HANDLER_SRC_PATH              ".*src"
+#endif
+
+// Make sure to include this header if using qInfo()
+#if (QT_VERSION < QT_VERSION_CHECK(5, 5, 0))
+  #if defined(QT_NO_INFO_OUTPUT)
+    #define qInfo      QT_NO_QDEBUG_MACRO
+  #else
+    #define qInfo      qDebug
+  #endif
+  #define QtInfoMsg    QtMsgType(4)
+#endif
+
+class AppDebugMessageHandler : public QObject
+{
+  Q_OBJECT
+
+  public:
+    // This class implements the singleton design pattern and is therefore publicly accessible only through instance().
+    static AppDebugMessageHandler * instance();
+    AppDebugMessageHandler(AppDebugMessageHandler const &) = delete;
+    void operator = (AppDebugMessageHandler const &)       = delete;
+
+    void setAppDebugOutputLevel(const quint8 & appDebugOutputLevel);
+    void setShowSourcePath(bool showSourcePath);
+    void setShowFunctionDeclarations(bool showFunctionDeclarations);
+    void addOutputDevice(QIODevice * device);
+    void removeOutputDevice(QIODevice * device);
+
+    void installAppMessageHandler();
+    void messageHandler(QtMsgType type, const QMessageLogContext & context, const QString & msg);
+
+  private:
+    // This class implements the singleton design pattern and therefore has only a private constructor.
+    explicit AppDebugMessageHandler(QObject * parent = Q_NULLPTR);
+    ~AppDebugMessageHandler() { }
+
+    QtMessageHandler m_defaultHandler;
+    QRegularExpression m_srcPathFilter;
+    QRegularExpression m_functionFilter;
+    quint8 m_appDebugOutputLevel;
+    QVector<QIODevice *> m_outputDevices;
+    bool m_showSourcePath;
+    bool m_showFunctionDeclarations;
+
+  signals:
+    void messageOutput(quint8 level, const QString & msg);
+};
+
+// Message handler which is installed using qInstallMessageHandler. This needs to be global.
+// Use AppDebugMessageHandler::instance()->installAppMessageHandler();
+//  instead of installing this function directly (it will verify this handler is enabled, etc).
+void g_appDebugMessageHandler(QtMsgType, const QMessageLogContext &, const QString &);
+
+#endif // APPDEBUGMESSAGEHANDLER_H

companion/src/apppreferencesdialog.cpp

@@ -1,29 +1,49 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
 #include "apppreferencesdialog.h"
 #include "ui_apppreferencesdialog.h"
 #include "mainwindow.h"
 #include "appdata.h"
 #include "helpers.h"
-#include "firmwareinterface.h"
-#ifdef JOYSTICKS
+#include "storage.h"
+#if defined(JOYSTICKS)
 #include "joystick.h"
 #include "joystickdialog.h"
 #endif
-#include <QDesktopServices>
-#include <QtGui>
 
-AppPreferencesDialog::AppPreferencesDialog(QWidget *parent) :
+AppPreferencesDialog::AppPreferencesDialog(QWidget * parent) :
   QDialog(parent),
-  ui(new Ui::AppPreferencesDialog)
+  ui(new Ui::AppPreferencesDialog),
+  updateLock(false),
+  mainWinHasDirtyChild(false)
 {
   ui->setupUi(this);
-  updateLock=false;
   setWindowIcon(CompanionIcon("apppreferences.png"));
 
   initSettings();
-  connect(ui->downloadVerCB, SIGNAL(currentIndexChanged(int)), this, SLOT(baseFirmwareChanged()));
-  connect(this, SIGNAL(accepted()), this, SLOT(writeValues()));
+  connect(ui->downloadVerCB, SIGNAL(currentIndexChanged(int)), this, SLOT(onBaseFirmwareChanged()));
+  connect(ui->opt_appDebugLog, &QCheckBox::toggled, this, &AppPreferencesDialog::toggleAppLogSettings);
+  connect(ui->opt_fwTraceLog, &QCheckBox::toggled, this, &AppPreferencesDialog::toggleAppLogSettings);
 
-#ifndef JOYSTICKS
+#if !defined(JOYSTICKS)
   ui->joystickCB->hide();
   ui->joystickCB->setDisabled(true);
   ui->joystickcalButton->hide();
@@ -39,59 +59,98 @@ AppPreferencesDialog::~AppPreferencesDialog()
   delete ui;
 }
 
-void AppPreferencesDialog::writeValues()
+void AppPreferencesDialog::setMainWinHasDirtyChild(bool value)
 {
-  g.useCompanionNightlyBuilds(ui->useCompanionNightlyBuilds->isChecked());
+  mainWinHasDirtyChild = value;
+}
+
+void AppPreferencesDialog::accept()
+{
+  Profile & profile = g.currentProfile();
+
   g.autoCheckApp(ui->autoCheckCompanion->isChecked());
-  g.useFirmwareNightlyBuilds(ui->useFirmwareNightlyBuilds->isChecked());
+  g.OpenTxBranch(AppData::DownloadBranchType(ui->OpenTxBranch->currentIndex()));
   g.autoCheckFw(ui->autoCheckFirmware->isChecked());
   g.showSplash(ui->showSplash->isChecked());
   g.simuSW(ui->simuSW->isChecked());
-  g.useWizard(ui->modelWizard_CB->isChecked());
+  g.removeModelSlots(ui->opt_removeBlankSlots->isChecked());
+  g.newModelAction(ui->opt_newMdl_useWizard->isChecked() ? AppData::MODEL_ACT_WIZARD : ui->opt_newMdl_useEditor->isChecked() ? AppData::MODEL_ACT_EDITOR : AppData::MODEL_ACT_NONE);
   g.historySize(ui->historySize->value());
   g.backLight(ui->backLightColor->currentIndex());
-  g.profile[g.id()].volumeGain(round(ui->volumeGain->value() * 10.0));
+  profile.volumeGain(round(ui->volumeGain->value() * 10.0));
   g.libDir(ui->libraryPath->text());
   g.gePath(ui->ge_lineedit->text());
   g.embedSplashes(ui->splashincludeCB->currentIndex());
   g.enableBackup(ui->backupEnable->isChecked());
 
+  g.appDebugLog(ui->opt_appDebugLog->isChecked());
+  g.fwTraceLog(ui->opt_fwTraceLog->isChecked());
+  g.appLogsDir(ui->appLogsDir->text());
+
   if (ui->joystickChkB ->isChecked() && ui->joystickCB->isEnabled()) {
-    g.jsSupport(ui->joystickChkB ->isChecked());  
+    g.jsSupport(ui->joystickChkB ->isChecked());
     g.jsCtrl(ui->joystickCB ->currentIndex());
   }
   else {
     g.jsSupport(false);
     g.jsCtrl(0);
   }
-  g.profile[g.id()].channelOrder(ui->channelorderCB->currentIndex());
-  g.profile[g.id()].defaultMode(ui->stickmodeCB->currentIndex());
-  g.profile[g.id()].renameFwFiles(ui->renameFirmware->isChecked());
-  g.profile[g.id()].burnFirmware(ui->burnFirmware->isChecked());
-  g.profile[g.id()].sdPath(ui->sdPath->text());
-  g.profile[g.id()].pBackupDir(ui->profilebackupPath->text());
-  g.profile[g.id()].penableBackup(ui->pbackupEnable->isChecked());
-  g.profile[g.id()].splashFile(ui->SplashFileName->text());
+  profile.channelOrder(ui->channelorderCB->currentIndex());
+  profile.defaultMode(ui->stickmodeCB->currentIndex());
+  profile.renameFwFiles(ui->renameFirmware->isChecked());
+  profile.burnFirmware(ui->burnFirmware->isChecked());
+  profile.sdPath(ui->sdPath->text());
+  profile.pBackupDir(ui->profilebackupPath->text());
+  profile.penableBackup(ui->pbackupEnable->isChecked());
+  profile.splashFile(ui->SplashFileName->text());
 
   // The profile name may NEVER be empty
   if (ui->profileNameLE->text().isEmpty())
-    g.profile[g.id()].name(tr("My Radio"));
+    profile.name(tr("My Radio"));
   else
-    g.profile[g.id()].name(ui->profileNameLE->text());
+    profile.name(ui->profileNameLE->text());
 
+  bool fwchange = false;
+  Firmware * newFw = getFirmwareVariant();  // always !null
   // If a new fw type has been choosen, several things need to reset
-  current_firmware_variant = getFirmwareVariant();
-  QString id = current_firmware_variant->getId();
-  if (g.profile[g.id()].fwType() != id) {
-    g.profile[g.id()].fwName("");
-    g.profile[g.id()].initFwVariables();
-    g.profile[g.id()].fwType(id);
+  if (Firmware::getCurrentVariant()->getId() != newFw->getId()) {
+    // check if we're going to be converting to a new radio type and there are unsaved files in the main window
+    if (mainWinHasDirtyChild && !Boards::isBoardCompatible(Firmware::getCurrentVariant()->getBoard(), newFw->getBoard())) {
+      QString q = tr("<p><b>You cannot switch Radio Type or change Build Options while there are unsaved file changes. What do you wish to do?</b></p> <ul>" \
+                     "<li><i>Save All</i> - Save any open file(s) before saving Settings.<li>" \
+                     "<li><i>Reset</i> - Revert to the previous Radio Type and Build Options before saving Settings.</li>" \
+                     "<li><i>Cancel</i> - Return to the Settings editor dialog.</li></ul>");
+      int resp = QMessageBox::question(this, windowTitle(), q, (QMessageBox::SaveAll | QMessageBox::Reset | QMessageBox::Cancel), QMessageBox::Cancel);
+      if (resp == QMessageBox::SaveAll) {
+        // signal main window to save files, need to do this before the fw actually changes
+        emit firmwareProfileAboutToChange();
+      }
+      else if (resp == QMessageBox::Reset) {
+        // bail out early before saving the radio type & firmware options
+        QDialog::accept();
+        return;
+      }
+      else {
+        // we do not accept the dialog close
+        return;
+      }
+    }
+    Firmware::setCurrentVariant(newFw);
+    profile.fwName("");
+    profile.resetFwVariables();
+    profile.fwType(newFw->getId());
+    fwchange = true;
   }
+
+  QDialog::accept();
+
+  if (fwchange)
+    emit firmwareProfileChanged();  // important to do this after the accepted() signal
 }
 
 void AppPreferencesDialog::on_snapshotPathButton_clicked()
 {
-  QString fileName = QFileDialog::getExistingDirectory(this,tr("Select your snapshot folder"), g.snapshotDir());
+  QString fileName = QFileDialog::getExistingDirectory(this, tr("Select your snapshot folder"), g.snapshotDir());
   if (!fileName.isEmpty()) {
     g.snapshotDir(fileName);
     g.snapToClpbrd(false);
@@ -101,34 +160,43 @@ void AppPreferencesDialog::on_snapshotPathButton_clicked()
 
 void AppPreferencesDialog::initSettings()
 {
+  const Profile & profile = g.currentProfile();
+
   ui->snapshotClipboardCKB->setChecked(g.snapToClpbrd());
-  ui->burnFirmware->setChecked(g.profile[g.id()].burnFirmware());
+  ui->burnFirmware->setChecked(profile.burnFirmware());
   ui->snapshotPath->setText(g.snapshotDir());
   ui->snapshotPath->setReadOnly(true);
   if (ui->snapshotClipboardCKB->isChecked()) {
     ui->snapshotPath->setDisabled(true);
     ui->snapshotPathButton->setDisabled(true);
   }
-#if defined(ALLOW_NIGHTLY_BUILDS)
-  ui->useCompanionNightlyBuilds->setChecked(g.useCompanionNightlyBuilds());
-  ui->useFirmwareNightlyBuilds->setChecked(g.useFirmwareNightlyBuilds());
-#else
-  ui->useCompanionNightlyBuilds->hide();
-  ui->useFirmwareNightlyBuilds->hide();
+
+#if !defined(ALLOW_NIGHTLY_BUILDS)
+  // remove nightly version option entirely unless it's the current one (because user might have nightly version also installed)
+  if (g.OpenTxBranch() != AppData::BRANCH_NIGHTLY_UNSTABLE)
+    ui->OpenTxBranch->removeItem(2);
+  // if it's already selected, add a warning message
+  else
+    ui->updatesLayout->addWidget(new QLabel("<font color='red'>" % tr("Note: Nightly builds are not available in this version, Release/RC update channel will be used.") % "</font>", this));
 #endif
+  ui->OpenTxBranch->setCurrentIndex(g.OpenTxBranch());
+
   ui->autoCheckCompanion->setChecked(g.autoCheckApp());
   ui->autoCheckFirmware->setChecked(g.autoCheckFw());
   ui->showSplash->setChecked(g.showSplash());
   ui->historySize->setValue(g.historySize());
   ui->backLightColor->setCurrentIndex(g.backLight());
-  ui->volumeGain->setValue(g.profile[g.id()].volumeGain() / 10.0);
+  ui->volumeGain->setValue(profile.volumeGain() / 10.0);
 
-  if (IS_TARANIS(GetCurrentFirmware()->getBoard())) {
+  if (IS_TARANIS(getCurrentBoard())) {
     ui->backLightColor->setEnabled(false);
   }
 
   ui->simuSW->setChecked(g.simuSW());
-  ui->modelWizard_CB->setChecked(g.useWizard());
+  ui->opt_removeBlankSlots->setChecked(g.removeModelSlots());
+  ui->opt_newMdl_useNone->setChecked(g.newModelAction() == AppData::MODEL_ACT_NONE);
+  ui->opt_newMdl_useWizard->setChecked(g.newModelAction() == AppData::MODEL_ACT_WIZARD);
+  ui->opt_newMdl_useEditor->setChecked(g.newModelAction() == AppData::MODEL_ACT_EDITOR);
   ui->libraryPath->setText(g.libDir());
   ui->ge_lineedit->setText(g.gePath());
 
@@ -137,15 +205,22 @@ void AppPreferencesDialog::initSettings()
       ui->backupPath->setText(g.backupDir());
       ui->backupEnable->setEnabled(true);
       ui->backupEnable->setChecked(g.enableBackup());
-    } else {
+    }
+    else {
       ui->backupEnable->setDisabled(true);
     }
-  } else {
-      ui->backupEnable->setDisabled(true);
+  }
+  else {
+    ui->backupEnable->setDisabled(true);
   }
   ui->splashincludeCB->setCurrentIndex(g.embedSplashes());
 
-#ifdef JOYSTICKS
+  ui->opt_appDebugLog->setChecked(g.appDebugLog());
+  ui->opt_fwTraceLog->setChecked(g.fwTraceLog());
+  ui->appLogsDir->setText(g.appLogsDir());
+  toggleAppLogSettings();
+
+#if defined(JOYSTICKS)
   ui->joystickChkB->setChecked(g.jsSupport());
   if (ui->joystickChkB->isChecked()) {
     QStringList joystickNames;
@@ -171,35 +246,33 @@ void AppPreferencesDialog::initSettings()
     ui->joystickCB->setDisabled(true);
     ui->joystickcalButton->setDisabled(true);
   }
-#endif  
-//  Profile Tab Inits  
-  ui->channelorderCB->setCurrentIndex(g.profile[g.id()].channelOrder());
-  ui->stickmodeCB->setCurrentIndex(g.profile[g.id()].defaultMode());
-  ui->renameFirmware->setChecked(g.profile[g.id()].renameFwFiles());
-  ui->sdPath->setText(g.profile[g.id()].sdPath());
-  if (!g.profile[g.id()].pBackupDir().isEmpty()) {
-    if (QDir(g.profile[g.id()].pBackupDir()).exists()) {
-      ui->profilebackupPath->setText(g.profile[g.id()].pBackupDir());
+#endif
+  //  Profile Tab Inits
+  ui->channelorderCB->setCurrentIndex(profile.channelOrder());
+  ui->stickmodeCB->setCurrentIndex(profile.defaultMode());
+  ui->renameFirmware->setChecked(profile.renameFwFiles());
+  ui->sdPath->setText(profile.sdPath());
+  if (!profile.pBackupDir().isEmpty()) {
+    if (QDir(profile.pBackupDir()).exists()) {
+      ui->profilebackupPath->setText(profile.pBackupDir());
       ui->pbackupEnable->setEnabled(true);
-      ui->pbackupEnable->setChecked(g.profile[g.id()].penableBackup());
+      ui->pbackupEnable->setChecked(profile.penableBackup());
     } else {
       ui->pbackupEnable->setDisabled(true);
     }
-  } else {
+  }
+  else {
       ui->pbackupEnable->setDisabled(true);
   }
 
-  ui->profileNameLE->setText(g.profile[g.id()].name());
-  ui->SplashFileName->setText(g.profile[g.id()].splashFile());
-
-  displayImage( g.profile[g.id()].splashFile() );
+  ui->profileNameLE->setText(profile.name());
 
   QString hwSettings;
-  if (g.profile[g.id()].stickPotCalib() == "" ) {
+  if (profile.stickPotCalib() == "" ) {
     hwSettings = tr("EMPTY: No radio settings stored in profile");
   }
   else  {
-    QString str = g.profile[g.id()].timeStamp();
+    QString str = profile.timeStamp();
     if (str.isEmpty())
       hwSettings = tr("AVAILABLE: Radio settings of unknown age");
     else
@@ -207,16 +280,15 @@ void AppPreferencesDialog::initSettings()
   }
   ui->lblGeneralSettings->setText(hwSettings);
 
-  Firmware * current_firmware = GetCurrentFirmware();
-
-  foreach(Firmware * firmware, firmwares) {
+  QString currType = QStringList(profile.fwType().split('-').mid(0, 2)).join('-');
+  foreach(Firmware * firmware, Firmware::getRegisteredFirmwares()) {
     ui->downloadVerCB->addItem(firmware->getName(), firmware->getId());
-    if (current_firmware->getFirmwareBase() == firmware) {
+    if (currType == firmware->getId()) {
       ui->downloadVerCB->setCurrentIndex(ui->downloadVerCB->count() - 1);
     }
   }
-  
-  baseFirmwareChanged();
+
+  onBaseFirmwareChanged();
 }
 
 void AppPreferencesDialog::on_libraryPathButton_clicked()
@@ -262,6 +334,15 @@ void AppPreferencesDialog::on_ProfilebackupPathButton_clicked()
   }
 }
 
+
+void AppPreferencesDialog::on_btn_appLogsDir_clicked()
+{
+  QString fileName = QFileDialog::getExistingDirectory(this, tr("Select a folder for application logs"), ui->appLogsDir->text());
+  if (!fileName.isEmpty()) {
+    ui->appLogsDir->setText(fileName);
+  }
+}
+
 void AppPreferencesDialog::on_ge_pathButton_clicked()
 {
   QString fileName = QFileDialog::getOpenFileName(this, tr("Select Google Earth executable"),ui->ge_lineedit->text());
@@ -269,8 +350,8 @@ void AppPreferencesDialog::on_ge_pathButton_clicked()
     ui->ge_lineedit->setText(fileName);
   }
 }
- 
-#ifdef JOYSTICKS
+
+#if defined(JOYSTICKS)
 void AppPreferencesDialog::on_joystickChkB_clicked() {
   if (ui->joystickChkB->isChecked()) {
     QStringList joystickNames;
@@ -307,41 +388,26 @@ void AppPreferencesDialog::on_joystickcalButton_clicked() {
 
 void AppPreferencesDialog::on_sdPathButton_clicked()
 {
-  QString fileName = QFileDialog::getExistingDirectory(this,tr("Select the folder replicating your SD structure"), g.profile[g.id()].sdPath());
+  QString fileName = QFileDialog::getExistingDirectory(this,tr("Select the folder replicating your SD structure"), g.currentProfile().sdPath());
   if (!fileName.isEmpty()) {
     ui->sdPath->setText(fileName);
   }
 }
 
-void AppPreferencesDialog::on_removeProfileButton_clicked()
+bool AppPreferencesDialog::displayImage(const QString & fileName)
 {
-  if ( g.id() == 0 ) {
-     QMessageBox::information(this, tr("Not possible to remove profile"), tr("The default profile can not be removed."));
-  }
-  else {
-    g.profile[g.id()].remove();
-    g.id( 0 );
-    initSettings();
-  }
-}
+  // Start by clearing the label
+  ui->imageLabel->clear();
 
-
-bool AppPreferencesDialog::displayImage( QString fileName )
-{
-  // Start by clearing the pixmap
-  ui->imageLabel->setPixmap(QPixmap());
-
-  QImage image(fileName);
-  if (image.isNull()) 
+  if (fileName.isEmpty())
     return false;
 
-  // Use the firmware name to determine splash width
-  int width = SPLASH_WIDTH;
-  if (g.profile[g.id()].fwType().contains("taranis"))
-    width = SPLASHX9D_WIDTH;
-  
-  ui->imageLabel->setPixmap( makePixMap( image, g.profile[g.id()].fwType()));
-  ui->imageLabel->setFixedSize(width, SPLASH_HEIGHT);
+  QImage image(fileName);
+  if (image.isNull())
+    return false;
+
+  ui->imageLabel->setPixmap(makePixMap(image));
+  ui->imageLabel->setFixedSize(getCurrentFirmware()->getCapability(LcdWidth), getCurrentFirmware()->getCapability(LcdHeight));
   return true;
 }
 
@@ -357,7 +423,7 @@ void AppPreferencesDialog::on_SplashSelect_clicked()
 
   if (!fileName.isEmpty()){
     g.imagesDir(QFileInfo(fileName).dir().absolutePath());
-   
+
     displayImage(fileName);
     ui->SplashFileName->setText(fileName);
   }
@@ -369,154 +435,126 @@ void AppPreferencesDialog::on_clearImageButton_clicked()
   ui->SplashFileName->clear();
 }
 
-
-void AppPreferencesDialog::showVoice(bool show)
+void AppPreferencesDialog::onBaseFirmwareChanged()
 {
-  ui->voiceLabel->setVisible(show);
-  ui->voiceCombo->setVisible(show);
-  QTimer::singleShot(0, this, SLOT(shrink()));
+  populateFirmwareOptions(getBaseFirmware());
 }
 
-void AppPreferencesDialog::baseFirmwareChanged()
+Firmware *AppPreferencesDialog::getBaseFirmware() const
 {
-  QVariant selected_firmware = ui->downloadVerCB->itemData(ui->downloadVerCB->currentIndex());
-
-  foreach(Firmware * firmware, firmwares) {
-    if (firmware->getId() == selected_firmware) {
-      populateFirmwareOptions(firmware);
-      break;
-    }
-  }
+  return Firmware::getFirmwareForId(ui->downloadVerCB->currentData().toString());
 }
 
-Firmware * AppPreferencesDialog::getFirmwareVariant()
+Firmware * AppPreferencesDialog::getFirmwareVariant() const
 {
-  QVariant selected_firmware = ui->downloadVerCB->itemData(ui->downloadVerCB->currentIndex());
+  QString id = ui->downloadVerCB->currentData().toString();
 
-  foreach(Firmware * firmware, firmwares) {
-    QString id = firmware->getId();
-    if (id == selected_firmware) {
-      foreach(QCheckBox *cb, optionsCheckBoxes) {
-        if (cb->isChecked()) {
-          id += QString("-") + cb->text();
-        }
-      }
-
-      if (voice && voice->isChecked()) {
-        id += QString("-tts") + ui->voiceCombo->currentText();
-      }
-
-      if (ui->langCombo->count()) {
-        id += QString("-") + ui->langCombo->currentText();
-      }
-
-      return GetFirmware(id);
-    }
+  foreach(QCheckBox *cb, optionsCheckBoxes.values()) {
+    if (cb->isChecked())
+      id += "-" + cb->text();
   }
 
-  // Should never occur...
-  return default_firmware_variant;
+  if (ui->langCombo->count())
+    id += "-" + ui->langCombo->currentText();
+
+  return Firmware::getFirmwareForId(id);
 }
 
-void AppPreferencesDialog::firmwareOptionChanged(bool state)
+void AppPreferencesDialog::onFirmwareOptionChanged(bool state)
 {
   QCheckBox *cb = qobject_cast<QCheckBox*>(sender());
-  if (cb == voice) {
-    showVoice(voice->isChecked());
-  }
-  Firmware * firmware=NULL;
-  if (cb && state) {
-    QVariant selected_firmware = ui->downloadVerCB->itemData(ui->downloadVerCB->currentIndex());
-    foreach(firmware, firmwares) {
-      if (firmware->getId() == selected_firmware) {
-        foreach(QList<Option> opts, firmware->opts) {
-          foreach(Option opt, opts) {
-            if (cb->text() == opt.name) {
-              foreach(Option other, opts) {
-                if (other.name != opt.name) {
-                  foreach(QCheckBox *ocb, optionsCheckBoxes) {
-                    if (ocb->text() == other.name) {
-                      ocb->setChecked(false);
-                    }
-                  }
-                }
-              }
-              return;
-            }
-          }
-        }
+  if (!(cb && state))
+    return;
+
+  // This de-selects any mutually exlusive options (that is, members of the same QList<Option> list).
+  const Firmware::OptionsList & fwOpts = getBaseFirmware()->optionGroups();
+  for (const Firmware::OptionsGroup & optGrp : fwOpts) {
+    for (const Firmware::Option & opt : optGrp) {
+      if (cb->text() == opt.name) {
+        QCheckBox *ocb = nullptr;
+        foreach(const Firmware::Option & other, optGrp)
+          if (other.name != opt.name && (ocb = optionsCheckBoxes.value(other.name, nullptr)))
+            ocb->setChecked(false);
+        return;
       }
     }
-  } 
+  }
+}
+
+void AppPreferencesDialog::toggleAppLogSettings()
+{
+  bool vis = (ui->opt_appDebugLog->isChecked() || ui->opt_fwTraceLog->isChecked());
+  ui->appLogsDir->setVisible(vis);
+  ui->lbl_appLogsDir->setVisible(vis);
+  ui->btn_appLogsDir->setVisible(vis);
 }
 
 void AppPreferencesDialog::populateFirmwareOptions(const Firmware * firmware)
 {
-  const Firmware * parent = firmware->getFirmwareBase();
+  const Firmware * baseFw = firmware->getFirmwareBase();
+  QStringList currVariant = Firmware::getCurrentVariant()->getId().split('-');
+  const QString currLang = ui->langCombo->count() ? ui->langCombo->currentText() : currVariant.last();
 
   updateLock = true;
 
-  QString id = current_firmware_variant->getId();
   ui->langCombo->clear();
-  foreach(const char *lang, parent->languages) {
+  for (const char *lang : baseFw->languageList()) {
     ui->langCombo->addItem(lang);
-    if (id.endsWith(lang)) {
+    if (currLang == lang) {
       ui->langCombo->setCurrentIndex(ui->langCombo->count() - 1);
     }
   }
 
-  voice = NULL; // we will search for a voice checkbox
+  if (optionsCheckBoxes.size()) {
+    currVariant.clear();
+    QMutableMapIterator<QString, QCheckBox *> it(optionsCheckBoxes);
+    while (it.hasNext()) {
+      it.next();
+      QCheckBox * cb = it.value();
+      if (cb->isChecked())
+        currVariant.append(it.key());    // keep previous selections
+      ui->optionsLayout->removeWidget(cb);
+      cb->deleteLater();
+      it.remove();
+    }
+  }
 
   int index = 0;
-  QWidget * prevFocus = ui->voiceCombo;
-  foreach(QList<Option> opts, parent->opts) {
-    foreach(Option opt, opts) {
-      if (index >= optionsCheckBoxes.size()) {
-        QCheckBox * checkbox = new QCheckBox(ui->profileTab);
-        ui->optionsLayout->addWidget(checkbox, optionsCheckBoxes.count()/5, optionsCheckBoxes.count()%5, 1, 1);
-        optionsCheckBoxes.push_back(checkbox);
-        connect(checkbox, SIGNAL(toggled(bool)), this, SLOT(firmwareOptionChanged(bool)));
-        if (prevFocus) {
-          QWidget::setTabOrder(prevFocus, checkbox);
-        }
-      }
-
-      QCheckBox *cb = optionsCheckBoxes.at(index++);
-      if (cb) {
-        cb->show();
-        cb->setText(opt.name);
-        cb->setToolTip(opt.tooltip);
-        cb->setCheckState(id.contains(opt.name) ? Qt::Checked : Qt::Unchecked);
-        if (opt.name == QString("voice")) {
-          voice = cb;
-        }
-        prevFocus = cb;
-      }
+  QWidget * prevFocus = ui->langCombo;
+  for (const Firmware::OptionsGroup &optGrp : baseFw->optionGroups()) {
+    for (const Firmware::Option &opt : optGrp) {
+      QCheckBox * cb = new QCheckBox(ui->profileTab);
+      cb->setText(opt.name);
+      cb->setToolTip(opt.tooltip);
+      cb->setChecked(currVariant.contains(opt.name));
+      ui->optionsLayout->addWidget(cb, index / 4, index % 4);
+      QWidget::setTabOrder(prevFocus, cb);
+      // connect to duplicates check handler if this option is part of a group
+      if (optGrp.size() > 1)
+        connect(cb, &QCheckBox::toggled, this, &AppPreferencesDialog::onFirmwareOptionChanged);
+      optionsCheckBoxes.insert(opt.name, cb);
+      prevFocus = cb;
+      ++index;
     }
   }
 
-  for (; index<optionsCheckBoxes.size(); index++) {
-    QCheckBox *cb = optionsCheckBoxes.at(index);
-    cb->hide();
-    cb->setCheckState(Qt::Unchecked);
+  // TODO: Remove once splash replacement supported on Horus
+  // NOTE: 480x272 image causes issues on screens <800px high, needs a solution like scrolling once reinstated
+  if (IS_HORUS(baseFw->getBoard())) {
+    ui->widget_splashImage->hide();
+    ui->SplashFileName->setText("");
   }
-
-  ui->voiceCombo->clear();
-  foreach(const char *lang, parent->ttslanguages) {
-    ui->voiceCombo->addItem(lang);
-    if (id.contains(QString("-tts%1").arg(lang))) {
-      ui->voiceCombo->setCurrentIndex(ui->voiceCombo->count() - 1);
-    }
+  else {
+    ui->widget_splashImage->show();
+    ui->SplashFileName->setText(g.currentProfile().splashFile());
+    displayImage(g.currentProfile().splashFile());
   }
 
-  showVoice(voice && voice->isChecked());
-
   updateLock = false;
-  QTimer::singleShot(0, this, SLOT(shrink()));
+  QTimer::singleShot(50, this, &AppPreferencesDialog::shrink);
 }
 
 void AppPreferencesDialog::shrink()
 {
-  resize(0,0);
+  adjustSize();
 }
-

companion/src/apppreferencesdialog.h

@@ -1,5 +1,25 @@
-#ifndef APPPREFERENCESDIALOG_H
-#define APPPREFERENCESDIALOG_H
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _APPPREFERENCESDIALOG_H_
+#define _APPPREFERENCESDIALOG_H_
 
 #include <QDialog>
 #include <QCheckBox>
@@ -16,49 +36,53 @@ class AppPreferencesDialog : public QDialog
     Q_OBJECT
 
   public:
-    explicit AppPreferencesDialog(QWidget *parent = 0);
+    explicit AppPreferencesDialog(QWidget * parent = 0);
     ~AppPreferencesDialog();
-    Joystick *joystick;
 
-  private:
-    QList<QCheckBox *> optionsCheckBoxes;
-    bool updateLock;
-    void showVoice(bool);
-    void showVoice();
-    void hideVoice();
-    void populateLocale();
-    void populateFirmwareOptions(const Firmware *);
-    Firmware * getFirmwareVariant();
-    QCheckBox * voice;
+    Joystick * joystick;
 
-    Ui::AppPreferencesDialog *ui;
-    void initSettings();
-    bool displayImage( QString fileName );
-    void loadProfileString(QString profile, QString label);
-    void loadFromProfile();
+  public slots:
+    void accept() Q_DECL_OVERRIDE;
+    void setMainWinHasDirtyChild(bool value);
+
+  signals:
+    void firmwareProfileChanged();
+    void firmwareProfileAboutToChange(bool saveFiles = true);
 
   protected slots:
-    void shrink();  
-    void baseFirmwareChanged();
-    void firmwareOptionChanged(bool state);
+    void shrink();
+    void onBaseFirmwareChanged();
+    void onFirmwareOptionChanged(bool state);
+    void toggleAppLogSettings();
 
-    void writeValues();
     void on_libraryPathButton_clicked();
     void on_snapshotPathButton_clicked();
     void on_snapshotClipboardCKB_clicked();
     void on_backupPathButton_clicked();
     void on_ProfilebackupPathButton_clicked();
     void on_ge_pathButton_clicked();
-    
+
     void on_sdPathButton_clicked();
-    void on_removeProfileButton_clicked();
     void on_SplashSelect_clicked();
     void on_clearImageButton_clicked();
+    void on_btn_appLogsDir_clicked();
 
-#ifdef JOYSTICKS
+#if defined(JOYSTICKS)
     void on_joystickChkB_clicked();
     void on_joystickcalButton_clicked();
 #endif
+
+  private:
+    void initSettings();
+    void populateFirmwareOptions(const Firmware *);
+    Firmware * getBaseFirmware() const;
+    Firmware * getFirmwareVariant() const;
+    bool displayImage(const QString & fileName);
+
+    Ui::AppPreferencesDialog *ui;
+    QMap<QString, QCheckBox *> optionsCheckBoxes;
+    bool updateLock;
+    bool mainWinHasDirtyChild;
 };
 
-#endif // APPPREFERENCESDIALOG_H
+#endif // _APPPREFERENCESDIALOG_H_

companion/src/burnconfigdialog.cpp

@@ -1,3 +1,23 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
 #include "burnconfigdialog.h"
 #include "ui_burnconfigdialog.h"
 #include "eeprominterface.h"
@@ -6,7 +26,7 @@
 #include "progressdialog.h"
 #include "process_flash.h"
 
-#if !defined WIN32 && defined __GNUC__
+#if !defined _MSC_VER && defined __GNUC__
 #include <unistd.h>
 #endif
 
@@ -20,8 +40,8 @@ burnConfigDialog::burnConfigDialog(QWidget *parent) :
 
     getSettings();
     populateProgrammers();
-    EEPROMInterface *eepromInterface = GetEepromInterface();
-    if (IS_STM32(eepromInterface->getBoard())) {
+    Board::Type board = getCurrentBoard();
+    if (IS_STM32(board)) {
       setWindowTitle(tr("DFU-UTIL Configuration"));
       ui->avrArgs->hide();
       ui->avrdude_location->hide();
@@ -37,10 +57,10 @@ burnConfigDialog::burnConfigDialog(QWidget *parent) :
       ui->label_sb1->hide();
       ui->label_sb3->hide();
       ui->samba_location->hide();
-      ui->samba_port->hide();      
+      ui->samba_port->hide();
       ui->sb_browse->hide();
     }
-    else if (IS_SKY9X(eepromInterface->getBoard())) {
+    else if (IS_SKY9X(board)) {
       setWindowTitle(tr("SAM-BA Configuration"));
       ui->avrArgs->hide();
       ui->avrdude_location->hide();
@@ -77,7 +97,7 @@ burnConfigDialog::burnConfigDialog(QWidget *parent) :
     ui->dfuArgs->hide();
 
     QTimer::singleShot(0, this, SLOT(shrink()));
-    connect(this,SIGNAL(accepted()),this,SLOT(putSettings()));
+    connect(this, SIGNAL(accepted()), this, SLOT(putSettings()));
 }
 
 burnConfigDialog::~burnConfigDialog()
@@ -85,6 +105,18 @@ burnConfigDialog::~burnConfigDialog()
     delete ui;
 }
 
+QStringList burnConfigDialog::getAvrdudeArgs()
+{
+    QStringList args = avrArgs;
+    if (!avrPort.isEmpty())
+      args << "-P" << avrPort;
+
+#if defined(__APPLE__)
+    args << "-C" << QFileInfo(QApplication::applicationDirPath() + "/../Resources/avrdude.conf").absoluteFilePath();
+#endif
+    return args;
+}
+
 void burnConfigDialog::getSettings()
 {
     avrLoc   = g.avrdudeLocation();
@@ -100,11 +132,16 @@ void burnConfigDialog::getSettings()
       dfuLoc =  QFileInfo("dfu-util.exe").absoluteFilePath();
 #elif defined __APPLE__
     if ( avrLoc.isEmpty())
-      avrLoc = "/usr/local/bin/avrdude";
+      avrLoc = QFileInfo(QApplication::applicationDirPath() + "/../Resources/avrdude").absoluteFilePath();
     if ( sambaLoc.isEmpty())
       sambaLoc = "/usr/local/bin/sam-ba";
     if ( dfuLoc.isEmpty())
-      dfuLoc =  QFileInfo("/opt/local/bin/dfu-util").absoluteFilePath();
+      dfuLoc = QFileInfo(QApplication::applicationDirPath() + "/../Resources/dfu-util").absoluteFilePath();
+#elif defined __FreeBSD__
+    if (avrLoc.isEmpty())
+      avrLoc = "/usr/local/bin/avrdude";
+    if (dfuLoc.isEmpty())
+      dfuLoc = "/usr/local/bin/dfu-util";
 #else
     if ( avrLoc.isEmpty())
       avrLoc = "/usr/bin/avrdude";
@@ -144,7 +181,7 @@ void burnConfigDialog::getSettings()
       ui->pushButton_3->setEnabled(true);
     } else {
       ui->pushButton_3->setDisabled(true);
-    }    
+    }
 }
 
 void burnConfigDialog::putSettings()
@@ -308,30 +345,30 @@ void burnConfigDialog::on_pushButton_4_clicked()
 
 void burnConfigDialog::on_advCtrChkB_toggled(bool checked)
 {
-  EEPROMInterface *eepromInterface = GetEepromInterface();
+  Board::Type board = getCurrentBoard();
   if (checked) {
-    if (IS_STM32(eepromInterface->getBoard())) {
+    if (IS_STM32(board)) {
       ui->label_dfu2->show();
       ui->dfuArgs->show();
     }
-    else if (IS_SKY9X(eepromInterface->getBoard())) {
+    else if (IS_SKY9X(board)) {
       ui->label_sb2->show();
       ui->arm_mcu->show();
     }
     else {
       ui->label_av3->show();
       ui->avrdude_mcu->show();
-      QMessageBox::warning(this, tr("Companion"),
+      QMessageBox::warning(this, CPN_STR_APP_NAME,
         tr("<b><u>WARNING!</u></b><br>Normally CPU type is automatically selected according to the chosen firmware.<br>If you change the CPU type the resulting eeprom could be inconsistent."),
         QMessageBox::Ok);
     }
   }
   else {
-    if (IS_STM32(eepromInterface->getBoard())) {
+    if (IS_STM32(board)) {
       ui->label_dfu2->hide();
       ui->dfuArgs->hide();
     }
-    else if (IS_SKY9X(eepromInterface->getBoard())) {
+    else if (IS_SKY9X(board)) {
       ui->label_sb2->hide();
       ui->arm_mcu->hide();
     }
@@ -346,7 +383,7 @@ void burnConfigDialog::on_advCtrChkB_toggled(bool checked)
 
 void burnConfigDialog::shrink()
 {
-  resize(0,0);
+  resize(0, 0);
 }
 
 

companion/src/burnconfigdialog.h

@@ -1,5 +1,25 @@
-#ifndef BURNCONFIGDIALOG_H_
-#define BURNCONFIGDIALOG_H_
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BURNCONFIGDIALOG_H_
+#define _BURNCONFIGDIALOG_H_
 
 #include <QtWidgets>
 
@@ -22,7 +42,7 @@ public:
     QString getAVRDUDE() {return avrLoc;}
     QString getSAMBA() {return sambaLoc;}
     QString getDFU() {return dfuLoc;}
-    QStringList getAvrdudeArgs() { QStringList args = avrArgs; if (!avrPort.isEmpty()) args << "-P" << avrPort; return args; }
+    QStringList getAvrdudeArgs();
     QStringList getDFUArgs() {return dfuArgs;}
     QString getProgrammer() {return avrProgrammer;}
     QString getMCU() {return avrMCU;}
@@ -70,4 +90,4 @@ private slots:
     void putSettings();
 };
 
-#endif // BURNCONFIGDIALOG_H_
+#endif // _BURNCONFIGDIALOG_H_

companion/src/companion.cpp

@@ -1,168 +1,285 @@
-/****************************************************************************
-**
-** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the examples of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial Usage
-** Licensees holding valid Qt Commercial licenses may use this file in
-** accordance with the Qt Commercial License Agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Nokia.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights.  These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-** If you have questions regarding the use of this file, please contact
-** Nokia at qt-info@nokia.com.
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include <QApplication>
-#include <QTranslator>
-#include <QLocale>
-#include <QString>
-#include <QDir>
-#include <QFileInfo>
-#include <QSplashScreen>
-#include <QThread>
-#include <iostream>
-#if defined(JOYSTICKS) || defined(SIMU_AUDIO)
-  #include <SDL.h>
-  #undef main
-#endif
-#include "mainwindow.h"
-#include "version.h"
-#include "eeprominterface.h"
-#include "appdata.h"
-
-#if defined WIN32 || !defined __GNUC__
-#include <windows.h>
-#define sleep(x) Sleep(x*1000)
-#else
-#include <unistd.h>
-#endif
-
-#ifdef __APPLE__
-#include <QProxyStyle> 
-
-class MyProxyStyle : public QProxyStyle
- {
-   public:
-    void polish ( QWidget * w ) {
-      QMenu* mn = dynamic_cast<QMenu*>(w);
-      QPushButton* pb = dynamic_cast<QPushButton*>(w);
-      if(!(mn || pb) && !w->testAttribute(Qt::WA_MacNormalSize))
-          w->setAttribute(Qt::WA_MacSmallSize);
-    }
- };
-#endif
-
-int main(int argc, char *argv[])
-{
-  Q_INIT_RESOURCE(companion);
-
-  QApplication app(argc, argv);
-  app.setApplicationName("OpenTX Companion");
-  app.setOrganizationName("OpenTX");
-  app.setOrganizationDomain("open-tx.org");
-  app.setAttribute(Qt::AA_DontShowIconsInMenus, false);
-
-  g.init();
-
-  QStringList strl = QApplication::arguments();
-  if (strl.contains("--version")) {
-    printf("%s\n", VERSION);
-    fflush(stdout);
-    exit(0);
-  }
-
-#ifdef __APPLE__
-  app.setStyle(new MyProxyStyle);
-#endif
-
-  QTranslator companionTranslator;
-  companionTranslator.load(":/companion_" + g.locale());
-  QTranslator qtTranslator;
-  qtTranslator.load((QString)"qt_" + g.locale().left(2), QLibraryInfo::location(QLibraryInfo::TranslationsPath));
-  app.installTranslator(&companionTranslator);
-  app.installTranslator(&qtTranslator);
-
-  // QTextCodec::setCodecForCStrings(QTextCodec::codecForName("UTF-8"));
-
-#if defined(JOYSTICKS) || defined(SIMU_AUDIO)
-  uint32_t sdlFlags = 0;
-  #ifdef JOYSTICKS
-    sdlFlags |= SDL_INIT_JOYSTICK;
-  #endif
-  #ifdef SIMU_AUDIO
-    sdlFlags |= SDL_INIT_AUDIO;
-  #endif
-  if (SDL_Init(sdlFlags) < 0) {
-    fprintf(stderr, "ERROR: couldn't initialize SDL: %s\n", SDL_GetError());
-  }
-#endif
-
-  registerEEpromInterfaces();
-  registerOpenTxFirmwares();
-  registerSimulators();
-
-  if (g.profile[g.id()].fwType().isEmpty()){
-    g.profile[g.id()].fwType(default_firmware_variant->getId());
-    g.profile[g.id()].fwName("");
-  }
-
-  QString splashScreen;
-  splashScreen = ":/images/splash.png";
-
-  QPixmap pixmap = QPixmap(splashScreen);
-  QSplashScreen *splash = new QSplashScreen(pixmap);
-
-  current_firmware_variant = GetFirmware(g.profile[g.id()].fwType());
-
-  MainWindow *mainWin = new MainWindow();
-  if (g.showSplash()) {
-    splash->show();
-    QTimer::singleShot(1000*SPLASH_TIME, splash, SLOT(close()));
-    QTimer::singleShot(1000*SPLASH_TIME, mainWin, SLOT(show()));
-  }
-  else {
-    mainWin->show();
-  }
-
-  int result = app.exec();
-
-  delete splash;
-  delete mainWin;
-
-  unregisterSimulators();
-  unregisterOpenTxFirmwares();
-  unregisterEEpromInterfaces();
-
-#if defined(JOYSTICKS) || defined(SIMU_AUDIO)
-  SDL_Quit();
-#endif
-
-  return result;
-}
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <QApplication>
+#include <QDateTime>
+#include <QDir>
+#include <QFile>
+#include <QMessageBox>
+#include <QSplashScreen>
+#if defined(JOYSTICKS) || defined(SIMU_AUDIO)
+  #include <SDL.h>
+  #undef main
+#endif
+
+#include "appdebugmessagehandler.h"
+#include "customdebug.h"
+#include "mainwindow.h"
+#include "version.h"
+#include "appdata.h"
+#include "simulatorinterface.h"
+#include "storage.h"
+#include "translations.h"
+#include "helpers.h"
+
+#ifdef __APPLE__
+#include <QProxyStyle>
+
+class MyProxyStyle : public QProxyStyle
+ {
+   public:
+    void polish ( QWidget * w ) {
+      QMenu* mn = dynamic_cast<QMenu*>(w);
+      QPushButton* pb = dynamic_cast<QPushButton*>(w);
+      if(!(mn || pb) && !w->testAttribute(Qt::WA_MacNormalSize))
+          w->setAttribute(Qt::WA_MacSmallSize);
+    }
+ };
+#endif
+
+void importError()
+{
+  QMessageBox::critical(nullptr, CPN_STR_APP_NAME, QCoreApplication::translate("Companion", "The saved settings could not be imported, please try again or continue with current settings."), QMessageBox::Ok, 0);
+}
+
+void checkSettingsImport(bool force = false)
+{
+  QString previousVersion;
+  bool found;
+  if (!(found = g.findPreviousVersionSettings(&previousVersion))) {
+    found = QDir(CPN_SETTINGS_BACKUP_DIR).entryList(QStringList({"*.ini"}), QDir::Files).size() > 0;
+  }
+  if (!found && !force)
+    return;
+
+  const QString impFileBtn = QCoreApplication::translate("Companion", "Import from File");
+  const QString impPrevBtn = QCoreApplication::translate("Companion", "Import from v%1").arg(previousVersion);
+  const QString impNoneBtn = QCoreApplication::translate("Companion", "Do not import");
+
+  QString msg;
+  if (previousVersion.isEmpty()) {
+    if (found)
+      msg = QCoreApplication::translate("Companion", "We have found possible Companion settings backup file(s).\nDo you want to import settings from a file?");
+    else
+      msg = QCoreApplication::translate("Companion", "Import settings from a file, or start with current values.");
+  }
+  else {
+    msg = QCoreApplication::translate("Companion", "We have found existing settings for Companion version: %1.\nDo you want to import them?\n\n" \
+                                                   "If you have a settings backup file, you may import that instead.").arg(previousVersion);
+  }
+
+  const int ret = QMessageBox::question(nullptr, CPN_STR_APP_NAME, msg, impNoneBtn, impFileBtn, (previousVersion.isEmpty() ? QString() : impPrevBtn), 0, 0);
+  if (!ret)
+    return;
+
+  // Import from previous version
+  if (ret == 2) {
+    if (!g.importSettings(previousVersion)) {
+      // very unlikely, but just in case of unexpected error, restart the import
+      importError();
+      checkSettingsImport();
+    }
+    return;
+  }
+
+  // Import from file
+  bool err = false;
+  QString impFile = CPN_SETTINGS_BACKUP_DIR;
+  impFile = QFileDialog::getOpenFileName(nullptr, QCoreApplication::translate("Companion", "Select %1:").arg(CPN_STR_APP_SETTINGS_FILES), impFile, CPN_STR_APP_SETTINGS_FILTER);
+
+  if (!impFile.isEmpty() && QFileInfo(impFile).isReadable()) {
+    QSettings fromSettings(impFile, QSettings::IniFormat);
+    if (g.importSettings(&fromSettings)) {
+      return;
+    }
+    else {
+      importError();
+      err = true;
+    }
+  }
+  // Restart the import prompt if user cancelled the file select dialog but we do have previous settings, or if we had a file import error.
+  if (err || !previousVersion.isEmpty())
+    checkSettingsImport();
+}
+
+void printHelpText()
+{
+  printf(qPrintable(QString(APP_COMPANION % " v%s\n\n")), VERSION);
+  const char tmpl[] = "  %s \t %s\n";
+  printf(tmpl, "--export",   QCoreApplication::translate("Companion", "Save application settings to file...").toUtf8().constData());
+  printf(tmpl, "--import",   QCoreApplication::translate("Companion", "Load application settings from file or previous version...").toUtf8().constData());
+  printf(tmpl, "--defaults", QCoreApplication::translate("Companion", "Reset ALL application settings to default and remove radio profiles...").toUtf8().constData());
+  printf(tmpl, "--quit  ",   QCoreApplication::translate("Companion", "Exit before settings initialization and application startup.").toUtf8().constData());
+  printf(tmpl, "--version",  QCoreApplication::translate("Companion", "Print version number and exit.").toUtf8().constData());
+  printf(tmpl, "--help|-h",  QCoreApplication::translate("Companion", "Print this help text.").toUtf8().constData());
+  fflush(stdout);
+}
+
+int main(int argc, char *argv[])
+{
+#if (QT_VERSION >= QT_VERSION_CHECK(5, 6, 0))
+  /* From doc: This attribute must be set before Q(Gui)Application is constructed. */
+  QApplication::setAttribute(Qt::AA_EnableHighDpiScaling);
+#endif
+
+  QApplication app(argc, argv);
+  app.setApplicationName(APP_COMPANION);
+  app.setOrganizationName(COMPANY);
+  app.setOrganizationDomain(COMPANY_DOMAIN);
+  app.setAttribute(Qt::AA_DontShowIconsInMenus, false);
+
+  const QStringList args(QApplication::arguments());
+
+  if (args.contains("--help") || args.contains("-h") || args.contains("/?")) {
+    printHelpText();
+    exit(0);
+  }
+
+  if (args.contains("--version")) {
+    printf("%s\n", VERSION);
+    fflush(stdout);
+    exit(0);
+  }
+
+  Q_INIT_RESOURCE(companion);
+
+  if (AppDebugMessageHandler::instance())
+    AppDebugMessageHandler::instance()->installAppMessageHandler();
+
+  CustomDebug::setFilterRules();
+
+  // handle settings export/import/reset via CLI
+
+  bool doExport = args.contains("--export");
+  bool doImport = args.contains("--import");
+  bool doReset = args.contains("--defaults");
+
+  if (doExport)
+    Helpers::exportAppSettings();
+
+  if (doReset) {
+    char ok;
+    printf("%s [Y/N] ", QCoreApplication::translate("Companion", "Reset ALL application settings to default values and remove radio profiles, are you sure?").toUtf8().constData());
+    std::cin >> ok;
+    if (ok != 'Y' && ok != 'y')
+      exit(0);
+    if (!doExport) {
+      printf("%s [Y/N] ", QCoreApplication::translate("Companion", "Would you like to perform a backup first?").toUtf8().constData());
+      std::cin >> ok;
+      if (ok == 'Y' || ok == 'y')
+        Helpers::exportAppSettings();
+    }
+    g.resetAllSettings();
+    g.storeAllSettings();
+    std::cout << QCoreApplication::translate("Companion", "Application settings were reset and saved.").toUtf8().constData() << std::endl;
+  }
+
+  if (doImport)
+    checkSettingsImport(true);
+
+  // give option to quit before settings init
+  if (args.contains("--quit"))
+    exit(0);
+
+  // end CLI handling
+
+  if (!doImport && g.isFirstUse())
+    checkSettingsImport(false);
+
+  g.init();
+
+  QFile dbgLog;
+  if (AppDebugMessageHandler::instance() && g.appDebugLog() && !g.appLogsDir().isEmpty() && QDir().mkpath(g.appLogsDir())) {
+    QString fn = g.appLogsDir() % "/CompanionDebug_" % QDateTime::currentDateTime().toString("yy-MM-dd_HH-mm-ss") % ".log";
+    dbgLog.setFileName(fn);
+    if (dbgLog.open(QIODevice::WriteOnly | QIODevice::Text)) {
+      AppDebugMessageHandler::instance()->addOutputDevice(&dbgLog);
+    }
+  }
+
+#ifdef __APPLE__
+  app.setStyle(new MyProxyStyle);
+#endif
+
+  Translations::installTranslators();
+
+#if defined(JOYSTICKS) || defined(SIMU_AUDIO)
+  uint32_t sdlFlags = 0;
+  #ifdef JOYSTICKS
+    sdlFlags |= SDL_INIT_JOYSTICK;
+  #endif
+  #ifdef SIMU_AUDIO
+    sdlFlags |= SDL_INIT_AUDIO;
+  #endif
+  if (SDL_Init(sdlFlags) < 0) {
+    fprintf(stderr, "ERROR: couldn't initialize SDL: %s\n", SDL_GetError());
+  }
+#endif
+
+  registerStorageFactories();
+  registerOpenTxFirmwares();
+  SimulatorLoader::registerSimulators();
+
+  Profile & profile = g.currentProfile();
+  if (profile.fwType().isEmpty()){
+    profile.fwType(Firmware::getDefaultVariant()->getId());
+    profile.fwName("");
+  }
+
+  QString splashScreen;
+  splashScreen = ":/images/splash.png";
+
+  QPixmap pixmap = QPixmap(splashScreen);
+  QSplashScreen *splash = new QSplashScreen(pixmap);
+
+  Firmware::setCurrentVariant(Firmware::getFirmwareForId(g.profile[g.id()].fwType()));
+
+  MainWindow *mainWin = new MainWindow();
+  if (g.showSplash()) {
+    splash->show();
+    QTimer::singleShot(1000*SPLASH_TIME, splash, SLOT(close()));
+    QTimer::singleShot(1000*SPLASH_TIME, mainWin, SLOT(show()));
+  }
+  else {
+    mainWin->show();
+  }
+
+  int result = app.exec();
+
+  delete splash;
+  delete mainWin;
+
+  SimulatorLoader::unregisterSimulators();
+  unregisterOpenTxFirmwares();
+  unregisterStorageFactories();
+
+#if defined(JOYSTICKS) || defined(SIMU_AUDIO)
+  SDL_Quit();
+#endif
+
+  qDebug() << "COMPANION EXIT" << result;
+
+  if (dbgLog.isOpen()) {
+    AppDebugMessageHandler::instance()->removeOutputDevice(&dbgLog);
+    dbgLog.close();
+  }
+
+  return result;
+}

companion/src/companion.qrc

@@ -1,25 +1,78 @@
 <!DOCTYPE RCC><RCC version="1.0">
   <qresource prefix="/">
     <file>images/customize.png</file>
-    <file>icon.png</file>
+    <file alias="icon.png">images/icon.png</file>
     <file>../../CREDITS.txt</file>
-    <file>../../DONATIONS.txt</file>
     <file>../releasenotes.txt</file>
-    <file>images/simulator/Horus/middle.png</file>
-    <file>images/simulator/Horus/left.png</file>
-    <file>images/simulator/Horus/right.png</file>
-    <file>images/simulator/Horus/top.png</file>
-    <file>images/simulator/Horus/bottom.png</file>
-    <file>images/simulator/Horus/led.png</file>
-    <file>images/simulator/Horus/border-right.png</file>
-    <file>images/simulator/Horus/left_btn1.png</file>
-    <file>images/simulator/Horus/left_btn2.png</file>
-    <file>images/simulator/Horus/left_scrnsht.png</file>
-    <file>images/simulator/Horus/right_btnU.png</file>
-    <file>images/simulator/Horus/right_btnL.png</file>
-    <file>images/simulator/Horus/right_btnD.png</file>
-    <file>images/simulator/Horus/right_btnR.png</file>
-    <file>images/simulator/Horus/right_ent.png</file>    
+    <file>images/screenshot.png</file>
+    <file>images/splash.png</file>
+    <file>images/companion-title.png</file>
+    <file>images/maps.png</file>
+    <file>images/track.png</file>
+    <file>images/track0.png</file>
+    <file>images/taranison.png</file>
+    <file>images/simulator/icons/svg/arrow_click.svg</file>
+    <file>images/simulator/icons/svg/camera.svg</file>
+    <file>images/simulator/icons/svg/camera-active.svg</file>
+    <file>images/simulator/icons/svg/console.svg</file>
+    <file>images/simulator/icons/svg/console-active.svg</file>
+    <file>images/simulator/icons/svg/eraser.svg</file>
+    <file>images/simulator/icons/svg/eraser-active.svg</file>
+    <file>images/simulator/icons/svg/fixed_x.svg</file>
+    <file>images/simulator/icons/svg/fixed_x-on.svg</file>
+    <file>images/simulator/icons/svg/fixed_y.svg</file>
+    <file>images/simulator/icons/svg/fixed_y-on.svg</file>
+    <file>images/simulator/icons/svg/folder_open.svg</file>
+    <file>images/simulator/icons/svg/hold_x.svg</file>
+    <file>images/simulator/icons/svg/hold_x-on.svg</file>
+    <file>images/simulator/icons/svg/hold_y.svg</file>
+    <file>images/simulator/icons/svg/hold_y-on.svg</file>
+    <file>images/simulator/icons/svg/info.svg</file>
+    <file>images/simulator/icons/svg/info-active.svg</file>
+    <file>images/simulator/icons/svg/joystick_settings.svg</file>
+    <file>images/simulator/icons/svg/joystick_settings-active.svg</file>
+    <file>images/simulator/icons/svg/line_horiz.svg</file>
+    <file>images/simulator/icons/svg/mouse.svg</file>
+    <file>images/simulator/icons/svg/toggle_lock.svg</file>
+    <file>images/simulator/icons/svg/toggle_lock-on.svg</file>
+    <file>images/simulator/icons/svg/radio_outputs.svg</file>
+    <file>images/simulator/icons/svg/radio_outputs-active.svg</file>
+    <file>images/simulator/icons/svg/reload_script.svg</file>
+    <file>images/simulator/icons/svg/reload_script-active.svg</file>
+    <file>images/simulator/icons/svg/restart.svg</file>
+    <file>images/simulator/icons/svg/restart-active.svg</file>
+    <file>images/simulator/icons/svg/telemetry.svg</file>
+    <file>images/simulator/icons/svg/telemetry-active.svg</file>
+    <file>images/simulator/icons/svg/trainer.svg</file>
+    <file>images/simulator/icons/svg/trainer-active.svg</file>
+    <file>images/simulator/icons/svg/word_wrap.svg</file>
+    <file>images/simulator/icons/svg/word_wrap-on.svg</file>
+    <file>images/simulator/X12/middle.png</file>
+    <file>images/simulator/X12/left.png</file>
+    <file>images/simulator/X12/right.png</file>
+    <file>images/simulator/X12/top.png</file>
+    <file>images/simulator/X12/bottom.png</file>
+    <file>images/simulator/X12/led.png</file>
+    <file>images/simulator/X12/border-right.png</file>
+    <file>images/simulator/X12/left_btn1.png</file>
+    <file>images/simulator/X12/left_btn2.png</file>
+    <file>images/simulator/X12/left_scrnsht.png</file>
+    <file>images/simulator/X12/right_btnU.png</file>
+    <file>images/simulator/X12/right_btnL.png</file>
+    <file>images/simulator/X12/right_btnD.png</file>
+    <file>images/simulator/X12/right_btnR.png</file>
+    <file>images/simulator/X12/right_ent.png</file>
+    <file>images/simulator/X10/left.png</file>
+    <file>images/simulator/X10/right.png</file>
+    <file>images/simulator/X10/top.png</file>
+    <file>images/simulator/X10/bottom.png</file>
+    <file>images/simulator/X10/left_mdl.png</file>
+    <file>images/simulator/X10/left_page.png</file>
+    <file>images/simulator/X10/left_scrnsht.png</file>
+    <file>images/simulator/X10/left_rtn.png</file>
+    <file>images/simulator/X10/left_sys.png</file>
+    <file>images/simulator/X10/left_tele.png</file>
+    <file>images/simulator/X10/right_ent.png</file>    
     <file>images/simulator/9X/9xdb.png</file>
     <file>images/simulator/9X/9xdl.png</file>
     <file>images/simulator/9X/9xdr.png</file>
@@ -53,12 +106,6 @@
     <file>images/simulator/9X/9xcursmin.png</file>
     <file>images/simulator/9X/9xcursdown.png</file>
     <file>images/simulator/9X/9xcursphoto.png</file>
-    <file>images/screenshot.png</file>
-    <file>images/splash.png</file>
-    <file>images/companion-title.png</file>
-    <file>images/maps.png</file>
-    <file>images/track.png</file>
-    <file>images/track0.png</file>
     <file>images/simulator/Taranis/x9b0.png</file>
     <file>images/simulator/Taranis/x9l0.png</file>
     <file>images/simulator/Taranis/x9l1.png</file>
@@ -71,7 +118,36 @@
     <file>images/simulator/Taranis/x9r3.png</file>
     <file>images/simulator/Taranis/x9s0.png</file>
     <file>images/simulator/Taranis/x9t0.png</file>
-    <file>images/taranison.png</file>    
+    <file>images/simulator/X7/bottom.png</file>
+    <file>images/simulator/X7/left.png</file>
+    <file>images/simulator/X7/left_exit.png</file>
+    <file>images/simulator/X7/left_menu.png</file>
+    <file>images/simulator/X7/left_page.png</file>
+    <file>images/simulator/X7/left_scrnshot.png</file>
+    <file>images/simulator/X7/right.png</file>
+    <file>images/simulator/X7/right_ent.png</file>
+    <file>images/simulator/X7/top.png</file>
+    <file>images/simulator/X9E/bottom.png</file>
+    <file>images/simulator/X9E/left.png</file>
+    <file>images/simulator/X9E/left_exit.png</file>
+    <file>images/simulator/X9E/left_menu.png</file>
+    <file>images/simulator/X9E/left_page.png</file>
+    <file>images/simulator/X9E/left_scrnshot.png</file>
+    <file>images/simulator/X9E/right.png</file>
+    <file>images/simulator/X9E/right_enter.png</file>
+    <file>images/simulator/X9E/top.png</file>
+    <file>images/simulator/XLITE/bottom.png</file>
+    <file>images/simulator/XLITE/left.png</file>
+    <file>images/simulator/XLITE/left_scrnshot.png</file>
+    <file>images/simulator/XLITE/right.png</file>
+    <file>images/simulator/XLITE/right_ent.png</file>
+    <file>images/simulator/XLITE/top.png</file>
+    <file>images/simulator/XLITE/right_exit.png</file>
+    <file>images/simulator/XLITE/right_shift.png</file>
+    <file>images/simulator/XLITE/right_right.png</file>
+    <file>images/simulator/XLITE/right_left.png</file>
+    <file>images/simulator/XLITE/right_up.png</file>
+    <file>images/simulator/XLITE/right_down.png</file>
     <file>images/wizard/ailerons.png</file>
     <file>images/wizard/airbrakes.png</file>
     <file>images/wizard/elevons.png</file> 
@@ -169,6 +245,9 @@
     <file>images/library/10702.png</file>
     <file>images/library/10801.png</file>
     <file>images/library/10802.png</file>
+    <file>themes/default/style.css</file>
+    <file>themes/default/style-osx.css</file>
+    <file>themes/default/modelprt.css</file>
     <file>themes/monochrome/16/paintbrush.png</file>
     <file>themes/monochrome/16/open.png</file>
     <file>themes/monochrome/16/edit.png</file>
@@ -564,6 +643,7 @@
     <file>themes/monoblue/16/contributors.png</file>
     <file>themes/monoblue/16/stop.png</file>
     <file>themes/monoblue/16/write_eeprom.png</file>
+    <file>themes/monoblue/16/sdsync.png</file>
     <file>themes/monoblue/24/paintbrush.png</file>
     <file>themes/monoblue/24/open.png</file>
     <file>themes/monoblue/24/edit.png</file>
@@ -607,6 +687,7 @@
     <file>themes/monoblue/24/contributors.png</file>
     <file>themes/monoblue/24/stop.png</file>
     <file>themes/monoblue/24/write_eeprom.png</file>
+    <file>themes/monoblue/24/sdsync.png</file>
     <file>themes/monoblue/32/paintbrush.png</file>
     <file>themes/monoblue/32/open.png</file>
     <file>themes/monoblue/32/edit.png</file>
@@ -650,6 +731,7 @@
     <file>themes/monoblue/32/contributors.png</file>
     <file>themes/monoblue/32/stop.png</file>
     <file>themes/monoblue/32/write_eeprom.png</file>
+    <file>themes/monoblue/32/sdsync.png</file>
     <file>themes/monoblue/48/paintbrush.png</file>
     <file>themes/monoblue/48/open.png</file>
     <file>themes/monoblue/48/edit.png</file>
@@ -693,6 +775,7 @@
     <file>themes/monoblue/48/contributors.png</file>
     <file>themes/monoblue/48/stop.png</file>
     <file>themes/monoblue/48/write_eeprom.png</file>
+    <file>themes/monoblue/48/sdsync.png</file>
     <file>themes/monowhite/16/paintbrush.png</file>
     <file>themes/monowhite/16/open.png</file>
     <file>themes/monowhite/16/edit.png</file>
@@ -736,6 +819,7 @@
     <file>themes/monowhite/16/contributors.png</file>
     <file>themes/monowhite/16/stop.png</file>
     <file>themes/monowhite/16/write_eeprom.png</file>
+    <file>themes/monowhite/16/sdsync.png</file>
     <file>themes/monowhite/24/paintbrush.png</file>
     <file>themes/monowhite/24/open.png</file>
     <file>themes/monowhite/24/edit.png</file>
@@ -779,6 +863,7 @@
     <file>themes/monowhite/24/contributors.png</file>
     <file>themes/monowhite/24/stop.png</file>
     <file>themes/monowhite/24/write_eeprom.png</file>
+    <file>themes/monowhite/24/sdsync.png</file>
     <file>themes/monowhite/32/paintbrush.png</file>
     <file>themes/monowhite/32/open.png</file>
     <file>themes/monowhite/32/edit.png</file>
@@ -822,6 +907,7 @@
     <file>themes/monowhite/32/contributors.png</file>
     <file>themes/monowhite/32/stop.png</file>
     <file>themes/monowhite/32/write_eeprom.png</file>
+    <file>themes/monowhite/32/sdsync.png</file>
     <file>themes/monowhite/48/paintbrush.png</file>
     <file>themes/monowhite/48/open.png</file>
     <file>themes/monowhite/48/edit.png</file>
@@ -865,6 +951,7 @@
     <file>themes/monowhite/48/contributors.png</file>
     <file>themes/monowhite/48/stop.png</file>
     <file>themes/monowhite/48/write_eeprom.png</file>
+    <file>themes/monowhite/48/sdsync.png</file>
     <file>themes/yerico/16/paintbrush.png</file>
     <file>themes/yerico/16/open.png</file>
     <file>themes/yerico/16/edit.png</file>

companion/src/comparedialog.cpp

@@ -1,45 +1,66 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
 #include "comparedialog.h"
 #include "ui_comparedialog.h"
+#include "appdata.h"
 #include "helpers.h"
+#include "modelslist.h"
+#include "styleeditdialog.h"
 #include <QPrinter>
 #include <QPrintDialog>
 
-// #if !defined WIN32 && defined __GNUC__
-// #include <unistd.h>
-// #endif
-
-class DragDropHeader {
-  public:
-    DragDropHeader():
-      general_settings(false),
-      models_count(0)
-    {
-    }
-    bool general_settings;
-    uint8_t models_count;
-    uint8_t models[C9X_MAX_MODELS];
-};
+//class DragDropHeader {
+//  public:
+//    DragDropHeader():
+//      general_settings(false),
+//      models_count(0)
+//    {
+//    }
+//    bool general_settings;
+//    uint8_t models_count;
+//    uint8_t models[CPN_MAX_MODELS];
+//};
 
 CompareDialog::CompareDialog(QWidget * parent, Firmware * firmware):
-  QDialog(parent, Qt::WindowTitleHint | Qt::WindowSystemMenuHint),
-  multimodelprinter(firmware),
-  model1Valid(false),
-  model2Valid(false),
+  QDialog(parent, Qt::Window),
+  multimodelprinter(new MultiModelPrinter(firmware)),
   ui(new Ui::CompareDialog)
 {
   ui->setupUi(this);
-
   setWindowIcon(CompanionIcon("compare.png"));
   setAcceptDrops(true);
+  if (!g.compareWinGeo().isEmpty()) {
+    restoreGeometry(g.compareWinGeo());
+  }
+}
 
-  //setDragDropOverwriteMode(true);
-  //setDropIndicatorShown(true);
-  // TODO scroll to top ... ui->textEdit->scrollToAnchor("1");
+CompareDialog::~CompareDialog()
+{
+  delete multimodelprinter;
+  delete ui;
 }
 
 void CompareDialog::dragMoveEvent(QDragMoveEvent * event)
 {
-  if (event->mimeData()->hasFormat("application/x-companion")) {   
+  if (event->mimeData()->hasFormat("application/x-companion-modeldata")) {
     event->acceptProposedAction();
   }
   else {
@@ -49,8 +70,7 @@ void CompareDialog::dragMoveEvent(QDragMoveEvent * event)
 
 void CompareDialog::dragEnterEvent(QDragEnterEvent * event)
 {
-  // accept just text/uri-list mime format
-  if (event->mimeData()->hasFormat("application/x-companion")) {   
+  if (event->mimeData()->hasFormat("application/x-companion-modeldata")) {
     event->acceptProposedAction();
   }
   else {
@@ -63,55 +83,85 @@ void CompareDialog::dragLeaveEvent(QDragLeaveEvent * event)
   event->accept();
 }
 
-bool CompareDialog::handleDroppedModel(const QMimeData * mimeData, ModelData & model, QLabel * label)
+bool CompareDialog::handleMimeData(const QMimeData * mimeData)
 {
-  if (mimeData->hasFormat("application/x-companion")) {
-    QByteArray gmData = mimeData->data("application/x-companion");
-    DragDropHeader * header = (DragDropHeader *)gmData.data();
-    if (!header->general_settings) {
-      char * gData = gmData.data() + sizeof(DragDropHeader);
-      if (gData[0] == 'M') {
-        ModelData * modeltemp = (ModelData *)(gData + 1);
-        if (modeltemp->used) {
-          memcpy(&model, modeltemp, sizeof(ModelData));
-          QString name(model.name);
-          if (!name.isEmpty())
-            label->setText(name);
-          else
-            label->setText(tr("No name"));
-          return true;
-        }
-      }
-    }
+  QVector<ModelData> mList;
+  GeneralSettings gs;
+  if (!TreeModel::decodeMimeData(mimeData, &mList, &gs) || mList.isEmpty())
+    return false;
+  for (int i=0; i < mList.size(); ++i) {
+    GMData data;
+    data.model = mList[i];
+    data.gs = gs;
+    modelsList.append(data);
   }
-  return false;
+  return true;
+}
+
+void CompareDialog::closeEvent(QCloseEvent * event)
+{
+  g.compareWinGeo(saveGeometry());
 }
 
 void CompareDialog::dropEvent(QDropEvent *event)
 {
-  QLabel * child = qobject_cast<QLabel*>(childAt(event->pos()));
-  if (!child) return;
-  if (child->objectName().contains("label_1")) {   
-    model1Valid = handleDroppedModel(event->mimeData(), model1, ui->label_1);
-  }
-  else if (child->objectName().contains("label_2")) {
-    model2Valid = handleDroppedModel(event->mimeData(), model2, ui->label_2);
-  }
-  event->accept();
-  if (model1Valid && model2Valid) {
-    multimodelprinter.setModel(0, model1);
-    multimodelprinter.setModel(1, model2);
-    ui->textEdit->setHtml(multimodelprinter.print(ui->textEdit->document()));
+  if (handleMimeData(event->mimeData())) {
+    event->accept();
+    compare();
   }
 }
 
-void CompareDialog::closeEvent(QCloseEvent *event) 
+void CompareDialog::compare()
 {
+  QLayoutItem *child;
+  while ((child = ui->layout_modelNames->takeAt(0))) {
+    if (child->widget())
+      delete child->widget();
+    delete child;
+  }
+
+  multimodelprinter->clearModels();
+  ui->textEdit->clear();
+
+  for (int i=0; i < modelsList.size(); ++i) {
+    multimodelprinter->setModel(i, &modelsList[i].model, &modelsList[i].gs);
+    QString name(modelsList.at(i).model.name);
+    if (name.isEmpty())
+      name = tr("Unnamed Model %1").arg(i+1);
+
+    QWidget * hdr = new QWidget(this);
+    hdr->setLayout(new QHBoxLayout());
+    hdr->layout()->setContentsMargins(0, 0, 0, 0);
+    hdr->layout()->setSpacing(2);
+    QToolButton * btn = new QToolButton(hdr);
+    btn->setIcon(CompanionIcon("clear.png"));
+    btn->setProperty("index", i);
+    btn->setFixedSize(18, 18);
+    btn->setToolTip(tr("Click to remove this model."));
+    hdr->layout()->addWidget(btn);
+    QLabel * lbl = new QLabel(name, this);
+    lbl->setStyleSheet("font-weight: bold;");
+    hdr->layout()->addWidget(lbl);
+    connect(btn, &QToolButton::clicked, this, &CompareDialog::removeModelBtnClicked);
+
+    ui->layout_modelNames->addWidget(hdr);
+  }
+  if (modelsList.size())
+    ui->textEdit->setHtml(multimodelprinter->print(ui->textEdit->document()));
 }
 
-CompareDialog::~CompareDialog()
+void CompareDialog::removeModel(int idx)
 {
-  delete ui;
+  if (idx < modelsList.size()) {
+    modelsList.remove(idx);
+    compare();
+  }
+}
+
+void CompareDialog::removeModelBtnClicked()
+{
+  if (sender() && sender()->property("index").isValid())
+    removeModel(sender()->property("index").toInt());
 }
 
 void CompareDialog::on_printButton_clicked()
@@ -140,3 +190,10 @@ void CompareDialog::on_printFileButton_clicked()
     ui->textEdit->print(&printer);
   }
 }
+
+void CompareDialog::on_styleButton_clicked()
+{
+  StyleEditDialog *g = new StyleEditDialog(this, MODEL_PRINT_CSS);
+  if (g->exec() == QDialog::Accepted)
+    compare();
+}

companion/src/comparedialog.h

@@ -1,41 +1,67 @@
-#ifndef _COMPAREDIALOG_H
-#define _COMPAREDIALOG_H
-
-#include <QtWidgets>
-#include "multimodelprinter.h"
-
-namespace Ui {
-  class CompareDialog;
-}
-
-class CompareDialog : public QDialog
-{
-  Q_OBJECT
-
-  public:
-    CompareDialog(QWidget *parent, Firmware * firmware);
-    ~CompareDialog();
-    
-  protected:
-    MultiModelPrinter multimodelprinter;
-    ModelData model1;
-    ModelData model2;
-    bool model1Valid;
-    bool model2Valid;
-    Ui::CompareDialog * ui;
-    
-  protected slots:
-    void on_printButton_clicked();
-    void on_printFileButton_clicked();
-    
-  protected:
-    void closeEvent(QCloseEvent * event);
-    bool handleDroppedModel(const QMimeData * mimeData, ModelData & model, QLabel * label);
-    void dropEvent(QDropEvent *event);
-    void dragMoveEvent(QDragMoveEvent *event);
-    void dragEnterEvent(QDragEnterEvent *event);
-    void dragLeaveEvent(QDragLeaveEvent *event);
-    void printDiff();
-};
-
-#endif // _COMPAREDIALOG_H
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _COMPAREDIALOG_H_
+#define _COMPAREDIALOG_H_
+
+#include <QtWidgets>
+#include "multimodelprinter.h"
+
+namespace Ui {
+  class CompareDialog;
+}
+
+class CompareDialog : public QDialog
+{
+  Q_OBJECT
+
+  public:
+    CompareDialog(QWidget *parent, Firmware * firmware);
+    ~CompareDialog();
+
+  protected:
+    struct GMData {
+        ModelData model;
+        GeneralSettings gs;
+    };
+
+    MultiModelPrinter * multimodelprinter;
+    QVector<GMData> modelsList;
+    QMap<int, GMData> modelsMap;
+    Ui::CompareDialog * ui;
+
+  protected slots:
+    void removeModelBtnClicked();
+    void on_printButton_clicked();
+    void on_printFileButton_clicked();
+    void on_styleButton_clicked();
+
+  protected:
+    virtual void closeEvent(QCloseEvent * event);
+    virtual void dragMoveEvent(QDragMoveEvent *event);
+    virtual void dragEnterEvent(QDragEnterEvent *event);
+    virtual void dragLeaveEvent(QDragLeaveEvent *event);
+    virtual void dropEvent(QDropEvent *event);
+    bool handleMimeData(const QMimeData * mimeData);
+    void compare();
+    void removeModel(int idx);
+};
+
+#endif // _COMPAREDIALOG_H_

companion/src/comparedialog.ui

@@ -29,63 +29,25 @@
    <string>Compare Models</string>
   </property>
   <layout class="QGridLayout" name="gridLayout">
-   <item row="0" column="0">
-    <layout class="QHBoxLayout" name="horizontalLayout_2">
-     <item>
-      <widget class="QLabel" name="label_1">
-       <property name="font">
-        <font>
-         <weight>75</weight>
-         <bold>true</bold>
-        </font>
-       </property>
-       <property name="acceptDrops">
-        <bool>true</bool>
-       </property>
-       <property name="styleSheet">
-        <string notr="true">color:green;</string>
-       </property>
-       <property name="text">
-        <string>Drag first model here</string>
-       </property>
-       <property name="alignment">
-        <set>Qt::AlignCenter</set>
-       </property>
-      </widget>
-     </item>
-     <item>
-      <widget class="QLabel" name="label_2">
-       <property name="font">
-        <font>
-         <weight>75</weight>
-         <bold>true</bold>
-        </font>
-       </property>
-       <property name="acceptDrops">
-        <bool>true</bool>
-       </property>
-       <property name="styleSheet">
-        <string notr="true">color:red;</string>
-       </property>
-       <property name="text">
-        <string>Drag second model here</string>
-       </property>
-       <property name="alignment">
-        <set>Qt::AlignCenter</set>
-       </property>
-      </widget>
-     </item>
-    </layout>
-   </item>
-   <item row="1" column="0">
+   <item row="2" column="0">
     <widget class="QTextEdit" name="textEdit">
      <property name="readOnly">
       <bool>true</bool>
      </property>
     </widget>
    </item>
-   <item row="2" column="0">
+   <item row="3" column="0">
     <layout class="QHBoxLayout" name="horizontalLayout">
+     <item>
+      <widget class="QLabel" name="label">
+       <property name="text">
+        <string>To compare models, drag and drop them anywhere in this window.</string>
+       </property>
+       <property name="wordWrap">
+        <bool>true</bool>
+       </property>
+      </widget>
+     </item>
      <item>
       <spacer name="horizontalSpacer">
        <property name="orientation">
@@ -106,6 +68,13 @@
        </property>
       </widget>
      </item>
+     <item>
+      <widget class="QPushButton" name="styleButton">
+       <property name="text">
+        <string>Style</string>
+       </property>
+      </widget>
+     </item>
      <item>
       <widget class="QPushButton" name="printButton">
        <property name="text">
@@ -122,11 +91,28 @@
      </item>
     </layout>
    </item>
+   <item row="1" column="0">
+    <layout class="QHBoxLayout" name="layout_modelNames">
+     <property name="spacing">
+      <number>6</number>
+     </property>
+     <property name="leftMargin">
+      <number>0</number>
+     </property>
+     <property name="topMargin">
+      <number>0</number>
+     </property>
+     <property name="rightMargin">
+      <number>0</number>
+     </property>
+     <property name="bottomMargin">
+      <number>0</number>
+     </property>
+    </layout>
+   </item>
   </layout>
  </widget>
- <resources>
-  <include location="companion.qrc"/>
- </resources>
+ <resources/>
  <connections>
   <connection>
    <sender>closeButton</sender>

companion/src/constants.h

@@ -1,41 +1,83 @@
-#ifndef _constants_h_
-#define _constants_h_
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
 
-enum BoardEnum {
-  BOARD_STOCK,
-  BOARD_M128,
-  BOARD_MEGA2560,
-  BOARD_GRUVIN9X,
-  BOARD_SKY9X,
-  BOARD_9XRPRO,
-  BOARD_AR9X,
-  BOARD_TARANIS,
-  BOARD_TARANIS_PLUS,
-  BOARD_TARANIS_X9E,
-  BOARD_FLAMENCO,
-  BOARD_HORUS
-};
+#ifndef _CONSTANTS_H_
+#define _CONSTANTS_H_
 
-#define C9X_MAX_MODELS            60
-#define C9X_MAX_TIMERS            3
-#define C9X_MAX_FLIGHT_MODES      9
-#define C9X_MAX_MIXERS            64
-#define C9X_MAX_INPUTS            32
-#define C9X_MAX_EXPOS             64
-#define C9X_MAX_CURVES            32
-#define C9X_MAX_POINTS            17
-#define C9X_MAX_GVARS             9
-#define C9X_MAX_ENCODERS          2
-#define C9X_NUM_CHNOUT            32 // number of real output channels
-#define C9X_NUM_CSW               64 // number of custom switches
-#define C9X_MAX_CUSTOM_FUNCTIONS  64 // number of functions assigned to switches
-#define C9X_NUM_MODULES           2
-#define NUM_STICKS                4
-#define BOARD_9X_NUM_POTS         3
-#define C9X_NUM_POTS              8
-#define NUM_CAL_PPM               4
-#define NUM_CYC                   3
-#define C9X_NUM_SWITCHES          32
-#define C9X_NUM_KEYS              32
+#include <QCoreApplication>
 
-#endif
+#define CPN_MAX_MODELS                 60
+#define CPN_MAX_TIMERS                 3
+#define CPN_MAX_FLIGHT_MODES           9
+#define CPN_MAX_MIXERS                 64
+#define CPN_MAX_INPUTS                 32
+#define CPN_MAX_EXPOS                  64
+#define CPN_MAX_CURVES                 32
+#define CPN_MAX_POINTS                 17
+#define CPN_MAX_GVARS                  9
+#define CPN_MAX_ENCODERS               2  // rotary encoders
+#define CPN_MAX_CHNOUT                 32 // number of real output channels
+#define CPN_MAX_LOGICAL_SWITCHES       64 // number of custom switches
+#define CPN_MAX_SPECIAL_FUNCTIONS      64 // number of functions assigned to switches
+#define CPN_MAX_MODULES                2
+#define CPN_MAX_STICKS                 Board::STICK_AXIS_COUNT
+#define CPN_MAX_TRIMS                  Board::TRIM_AXIS_COUNT
+#define CPN_MAX_TRIM_SW                Board::TRIM_SW_COUNT
+#define CPN_MAX_KNOBS                  4
+#define CPN_MAX_SLIDERS                4
+#define CPN_MAX_POTS                   (CPN_MAX_KNOBS + CPN_MAX_SLIDERS)
+#define CPN_MAX_CYC                    3
+#define CPN_MAX_SWITCHES               32
+#define CPN_MAX_KEYS                   32
+#define CPN_MAX_MOUSE_ANALOGS          2
+#define CPN_MAX_ANALOGS                (CPN_MAX_STICKS + CPN_MAX_POTS + CPN_MAX_MOUSE_ANALOGS)
+
+#define CPN_STR_APP_NAME               QCoreApplication::translate("Companion", "OpenTX Companion")
+#define CPN_STR_TTL_INFO               QCoreApplication::translate("Companion", "Information")        // shared Title Case words, eg. for a window title or section heading
+#define CPN_STR_TTL_WARNING            QCoreApplication::translate("Companion", "Warning")
+#define CPN_STR_TTL_ERROR              QCoreApplication::translate("Companion", "Error")
+#define CPN_STR_TTL_CONFIRM            QCoreApplication::translate("Companion", "Please Confirm")
+
+#define CPN_STR_FILES                  QCoreApplication::translate("Companion", "files")
+#define CPN_STR_RAD_MOD_SETTINGS       QCoreApplication::translate("Companion", "Radio and Models settings")
+#define HEX_FILES_FILTER               "HEX " % CPN_STR_FILES % " (*.hex);;"
+#define BIN_FILES_FILTER               "BIN " % CPN_STR_FILES % " (*.bin);;"
+#define DFU_FILES_FILTER               "DFU " % CPN_STR_FILES % " (*.dfu);;"
+#define EEPE_FILES_FILTER              "EEPE " % CPN_STR_FILES % " (*.eepe);;"
+#define OTX_FILES_FILTER               "OpenTX " % CPN_STR_FILES % " (*.otx);;"
+#define EEPROM_FILES_FILTER            CPN_STR_RAD_MOD_SETTINGS % " " % CPN_STR_FILES % " (*.otx *.eepe *.bin *.hex);;" % OTX_FILES_FILTER % EEPE_FILES_FILTER % BIN_FILES_FILTER % HEX_FILES_FILTER
+#define FLASH_FILES_FILTER             "FLASH " % CPN_STR_FILES % " (*.bin *.hex *.dfu);;" % BIN_FILES_FILTER % HEX_FILES_FILTER % DFU_FILES_FILTER
+#define EXTERNAL_EEPROM_FILES_FILTER   "EEPROM " % CPN_STR_FILES % " (*.bin *.hex);;" % BIN_FILES_FILTER % HEX_FILES_FILTER
+#define ER9X_EEPROM_FILE_TYPE          "ER9X_EEPROM_FILE"
+#define EEPE_EEPROM_FILE_HEADER        "EEPE EEPROM FILE"
+#define EEPE_MODEL_FILE_HEADER         "EEPE MODEL FILE"
+
+#define CPN_STR_APP_SETTINGS           QCoreApplication::translate("Companion", "Application Settings")
+#define CPN_STR_APP_SETTINGS_FILES     CPN_STR_APP_SETTINGS % " " % CPN_STR_FILES
+#define CPN_STR_APP_SETTINGS_FILTER    CPN_STR_APP_SETTINGS_FILES % " (*.ini)"
+
+#define CPN_STR_UNKNOWN_ITEM           "???"
+
+#define CPN_STR_SW_INDICATOR_UP        QCoreApplication::translate("RawSwitch", "\xE2\x86\x91")  // Switch up position indicator: Up arrow, or similar.
+#define CPN_STR_SW_INDICATOR_DN        QCoreApplication::translate("RawSwitch", "\xE2\x86\x93")  // Switch down position indicator: Down arrow, or similar.
+#define CPN_STR_SW_INDICATOR_NEUT      QCoreApplication::translate("RawSwitch", "-")             // Switch neutral (middle) position indicator.
+#define CPN_STR_SW_INDICATOR_REV       QCoreApplication::translate("RawSwitch", "!")             // Switch reversed logic (NOT) indicator.
+
+#endif // _CONSTANTS_H_

companion/src/contributorsdialog.h

@@ -1,23 +0,0 @@
-#ifndef CONTRIBUTORSDIALOG_H
-#define CONTRIBUTORSDIALOG_H
-
-#include <QDialog>
-
-namespace Ui {
-  class HtmlDialog;
-}
-
-class ContributorsDialog : public QDialog
-{
-  Q_OBJECT
-
-  public:
-    explicit ContributorsDialog(QWidget * parent = 0);
-    ~ContributorsDialog();
-
-  private:
-    Ui::HtmlDialog * ui;
-    QString formatTable(const QString & title, const QStringList & names, int colums);
-};
-
-#endif // CONTRIBUTORSDIALOG_H

companion/src/converteeprom.cpp

@@ -1,45 +0,0 @@
-#include "converteeprom.h"
-#include "eeprominterface.h"
-#include "firmwareinterface.h"
-#include <QFile>
-
-bool convertEEprom(const QString &sourceEEprom, const QString &destinationEEprom, const QString &firmwareFilename)
-{
-  Firmware *currentFirmware = GetCurrentFirmware();
-  FirmwareInterface firmware(firmwareFilename);
-  if (!firmware.isValid())
-    return false;
-
-  unsigned int version = firmware.getEEpromVersion();
-  unsigned int variant = firmware.getEEpromVariant();
-
-  QFile sourceFile(sourceEEprom);
-  int eeprom_size = sourceFile.size();
-  if (!eeprom_size)
-    return false;
-
-  if (!sourceFile.open(QIODevice::ReadOnly))
-    return false;
-
-  QByteArray eeprom(eeprom_size, 0);
-  long result = sourceFile.read(eeprom.data(), eeprom_size);
-  sourceFile.close();
-
-  QSharedPointer<RadioData> radioData = QSharedPointer<RadioData>(new RadioData());
-  std::bitset<NUM_ERRORS> errors((unsigned long long)LoadEeprom(*radioData, (uint8_t *)eeprom.data(), eeprom_size));
-  if (!errors.test(ALL_OK)
-    || !currentFirmware->saveEEPROM((uint8_t *)eeprom.data(), *radioData, variant, version)) {
-    return false;
-  }
-
-  QFile destinationFile(destinationEEprom);
-  if (!destinationFile.open(QIODevice::WriteOnly))
-    return false;
-
-  result = destinationFile.write(eeprom.constData(), eeprom_size);
-  destinationFile.close();
-  if (result != eeprom_size)
-    return false;
-
-  return true;
-}

companion/src/converteeprom.h

@@ -1,8 +0,0 @@
-#ifndef CONVERTHEADER_H_
-#define CONVERTHEADER_H_
-
-#include <QString>
-
-bool convertEEprom(const QString &sourceEEprom, const QString &destinationEEprom, const QString &firmware);
-
-#endif /* CONVERTHEADER_H_ */

companion/src/creditsdialog.cpp

@@ -1,8 +1,29 @@
-#include "contributorsdialog.h"
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "creditsdialog.h"
 #include "ui_htmldialog.h"
 #include "helpers.h"
+#include <QFile>
 
-ContributorsDialog::ContributorsDialog(QWidget * parent):
+CreditsDialog::CreditsDialog(QWidget * parent):
   QDialog(parent),
   ui(new Ui::HtmlDialog)
 {
@@ -21,42 +42,8 @@ ContributorsDialog::ContributorsDialog(QWidget * parent):
                 "</head>"
                 "<body class=\"normal\">";
 
-  QFile credits(":/CREDITS.txt");
-  if (credits.open(QIODevice::ReadOnly | QIODevice::Text)) {
-    QStringList names;
-    while (!credits.atEnd()) {
-      QByteArray line = credits.readLine();
-      if (line.trimmed() == "")
-        break;
-      names.append(line.trimmed());
-    }
-    str.append(formatTable(tr("Main Developers"), names, 3));
-
-    names.clear();
-    while (!credits.atEnd()) {
-      QByteArray line = credits.readLine();
-      names.append(line.trimmed());
-    }
-    str.append(formatTable(tr("Other contributors"), names, 3));
-  }
-
-  QFile donations(":/DONATIONS.txt");
-  if (donations.open(QIODevice::ReadOnly | QIODevice::Text)) {
-    QStringList names;
-    while (!donations.atEnd()) {
-      QByteArray line = donations.readLine();
-      if (line.trimmed() == "")
-        break;
-      names.append(line.trimmed());
-    }
-    str.append(formatTable(tr("Companies and projects who have donated to OpenTX"), names, 3));
-
-    names.clear();
-    while (!donations.atEnd()) {
-      QByteArray line = donations.readLine();
-      names.append(line);
-    }
-    str.append(formatTable(tr("People who have donated to OpenTX"), names, 6));
+  foreach(CreditsSection section, readCredits()) {
+    str.append(formatTable(sectionTitle(section.title), section.names, 3));
   }
 
   str.append("<table><tr><td class=\"normal\">&nbsp;</td></tr>" \
@@ -66,9 +53,9 @@ ContributorsDialog::ContributorsDialog(QWidget * parent):
 #if 0
   QFile blacklist(":/BLACKLIST.txt");
   if (blacklist.open(QIODevice::ReadOnly | QIODevice::Text)) {
-	QStringList names;
-	names << blacklist.readAll();
-	str.append(formatTable(tr("OpenTX Blacklist"), names, 1));
+    QStringList names;
+    names << blacklist.readAll();
+    str.append(formatTable(tr("OpenTX Blacklist"), names, 1));
   }
 #endif
 
@@ -78,12 +65,45 @@ ContributorsDialog::ContributorsDialog(QWidget * parent):
   ui->textEditor->setOpenExternalLinks(true);
 }
 
-ContributorsDialog::~ContributorsDialog()
+CreditsDialog::~CreditsDialog()
 {
   delete ui;
 }
 
-QString ContributorsDialog::formatTable(const QString & title, const QStringList & names, int columns)
+QList<CreditsDialog::CreditsSection> CreditsDialog::readCredits()
+{
+  QFile credits(":/CREDITS.txt");
+  QList<CreditsSection> result;
+  if (credits.open(QIODevice::ReadOnly | QIODevice::Text)) {
+    while (!credits.atEnd()) {
+      QByteArray line = credits.readLine().trimmed();
+      if (line.size() >= 2) {
+        if (line.startsWith("[") && line.endsWith("]")) {
+          result.push_back(CreditsSection(line.mid(1, line.size() - 2)));
+        } else {
+          result.back().addName(line);
+        }
+      }
+    }
+  }
+  return result;
+}
+
+QString CreditsDialog::sectionTitle(const QString & title)
+{
+  if (title == "Main developers")
+    return tr("Main developers");
+  else if (title == "Translators")
+    return tr("Translators");
+  else if (title == "Companies and projects who have donated to OpenTX")
+    return tr("Companies and projects who have donated to OpenTX");
+  else if (title == "People who have donated to OpenTX")
+    return tr("People who have donated to OpenTX");
+  else
+    return tr("Other contributors");
+}
+
+QString CreditsDialog::formatTable(const QString & title, const QStringList & names, int columns)
 {
   const float cwidth = 100.0 / columns;
   QString str = "<table width=\"100%\" border=0 cellspacing=0 cellpadding=2>" \

companion/src/creditsdialog.h

@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CREDITSDIALOG_H_
+#define _CREDITSDIALOG_H_
+
+#include <QDialog>
+
+namespace Ui {
+  class HtmlDialog;
+}
+
+class CreditsDialog : public QDialog
+{
+  Q_OBJECT
+
+  class CreditsSection
+  {
+    public:
+      CreditsSection(const QString & title):
+        title(title)
+      {
+      }
+
+      void addName(const QString & name)
+      {
+        names.push_back(name);
+      }
+
+      QString title;
+      QStringList names;
+  };
+
+  public:
+    explicit CreditsDialog(QWidget * parent = 0);
+    ~CreditsDialog();
+
+  private:
+    Ui::HtmlDialog * ui;
+    QList<CreditsSection> readCredits();
+    QString sectionTitle(const QString & title);
+    QString formatTable(const QString & title, const QStringList & names, int colums);
+};
+
+#endif // _CREDITSDIALOG_H_

companion/src/customdebug.cpp

@@ -1,38 +1,40 @@
-/*
- * Copyright (C) OpenTX
- *
- * Based on code named
- *   th9x - http://code.google.com/p/th9x 
- *   er9x - http://code.google.com/p/er9x
- *   gruvin9x - http://code.google.com/p/gruvin9x
- *
- * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "opentx.h"
-
-#if defined(PCBSTD) && defined(VOICE)
-volatile uint8_t LcdLock;
-#define LCD_LOCK() LcdLock = 1
-#define LCD_UNLOCK() LcdLock = 0
-#else
-#define LCD_LOCK()
-#define LCD_UNLOCK()
-#endif
-
-#if defined(LCD_KS108)
-#include "targets/9x/lcd_ks108_driver.cpp"
-#elif defined(LCD_ST7920)
-#include "targets/9x/lcd_st7920_driver.cpp"
-#else
-#include "targets/9x/lcd_default_driver.cpp"
-#endif
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "customdebug.h"
+
+Q_LOGGING_CATEGORY(eepromImport, "eeprom.import")
+
+Q_LOGGING_CATEGORY(simulatorInterfaceLoader, "simulator.interface.loader")
+
+void CustomDebug::setFilterRules()
+{
+  QString rules;
+  rules.append("eeprom.import=");
+#if defined(DEBUG_STORAGE_IMPORT)
+  rules.append("true\n");
+#else
+  rules.append("false\n");
+#endif
+
+  rules.append("simulator.interface.*=true\n");
+
+  QLoggingCategory::setFilterRules(rules);
+}

companion/src/customdebug.h

@@ -1,16 +1,38 @@
-#ifndef customdebug_h
-#define customdebug_h
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
 
-#include <QDebug>
+#ifndef _CUSTOMDEBUG_H_
+#define _CUSTOMDEBUG_H_
 
+#include <QLoggingCategory>
 
 // Controls the generation of debug output for EEPROM import
-#if defined(DEBUG_MODEL_IMPORT)
-  inline QDebug eepromImportDebug() { return QDebug(QtDebugMsg); }
-#else
-  #undef eepromImportDebug
-  inline QNoDebug eepromImportDebug() { return QNoDebug(); }
-#endif
+Q_DECLARE_LOGGING_CATEGORY(eepromImport)  // "eeprom.import"
 
+// Controls the generation of debug output of SimulatorLoader class
+Q_DECLARE_LOGGING_CATEGORY(simulatorInterfaceLoader)  // "simulator.interface.loader"
 
-#endif
+class CustomDebug
+{
+  public:
+    static void setFilterRules();
+};
+
+#endif // _CUSTOMDEBUG_H_

companion/src/customizesplashdialog.cpp

@@ -1,3 +1,23 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
 #include "customizesplashdialog.h"
 #include "ui_customizesplashdialog.h"
 #include "flashfirmwaredialog.h"
@@ -29,11 +49,11 @@ void Side::markSourceButton()
 
 void Side::copyImage( Side side )
 {
- if ((*source!=UNDEFINED) && (*side.source!=UNDEFINED))
+  if ((*source!=UNDEFINED) && (*side.source!=UNDEFINED))
     imageLabel->setPixmap(*side.imageLabel->pixmap());
 }
 
-bool Side::displayImage( QString fileName, Source pictSource )
+bool Side::displayImage(QString fileName, Source pictSource)
 {
   QImage image;
 
@@ -41,7 +61,7 @@ bool Side::displayImage( QString fileName, Source pictSource )
     return false;
 
   // Determine which picture format to use
-  if (pictSource == FW ){
+  if (pictSource == FW) {
     FirmwareInterface firmware(fileName);
     if (!firmware.hasSplash())
       return false;
@@ -54,39 +74,36 @@ bool Side::displayImage( QString fileName, Source pictSource )
     if (pictSource== PICT)
       *format = image.width()>WIDTH_9X ? LCDTARANIS : LCD9X;
     else if (pictSource == PROFILE)
-      *format = (g.profile[g.id()].fwType().contains("taranis")) ? LCDTARANIS : LCD9X; 
+      *format = (g.profile[g.id()].fwType().contains("x9")) ? LCDTARANIS : LCD9X;
   }
+
   if (image.isNull()) {
     return false;
   }
-  // Load image
-  if (*format==LCDTARANIS) {
-    imageLabel->setPixmap( makePixMap( image, "taranis" ));
-    imageLabel->setFixedSize(WIDTH_TARANIS*2, HEIGHT_TARANIS*2);
-  }
-  else {
-    imageLabel->setPixmap( makePixMap( image, "9x" )); 
-    imageLabel->setFixedSize(WIDTH_9X*2, HEIGHT_9X*2);
-  }
 
-  switch (pictSource){
-  case FW:
-    fileNameEdit->setText(QObject::tr("FW: %1").arg(fileName));
-    *saveToFileName = fileName;
-    *source=FW;
-    break;
-  case PICT:
-    fileNameEdit->setText(QObject::tr("Pict: %1").arg(fileName));
-    *saveToFileName = fileName;
-    *source=PICT;
-    break;
-  case PROFILE:
-    fileNameEdit->setText(QObject::tr("Profile image"));
-    *saveToFileName = fileName;
-    *source=PROFILE;
-    break;
-  default:
-    break;
+  // Load image
+  QPixmap pixmap = makePixMap(image);
+  imageLabel->setPixmap(pixmap);
+  imageLabel->setFixedSize(pixmap.width()*2, pixmap.height()*2);
+
+  switch (pictSource) {
+    case FW:
+      fileNameEdit->setText(CustomizeSplashDialog::tr("FW: %1").arg(fileName));
+      *saveToFileName = fileName;
+      *source = FW;
+      break;
+    case PICT:
+      fileNameEdit->setText(CustomizeSplashDialog::tr("Pict: %1").arg(fileName));
+      *saveToFileName = fileName;
+      *source = PICT;
+      break;
+    case PROFILE:
+      fileNameEdit->setText(CustomizeSplashDialog::tr("Profile image"));
+      *saveToFileName = fileName;
+      *source = PROFILE;
+      break;
+    default:
+      break;
   }
   saveButton->setEnabled(true);
   libraryButton->setEnabled(true);
@@ -133,17 +150,15 @@ bool Side::saveImage()
   return true;
 }
 
-//*** customizeSplashDialog Class ***
-
-customizeSplashDialog::customizeSplashDialog(QWidget *parent) :
+CustomizeSplashDialog::CustomizeSplashDialog(QWidget *parent) :
   QDialog(parent),
-  ui(new Ui::customizeSplashDialog)
+  ui(new Ui::CustomizeSplashDialog)
 {
   ui->setupUi(this);
   setWindowIcon(CompanionIcon("paintbrush.png"));
   ui->leftLibraryButton->setIcon(CompanionIcon("library.png"));
   ui->rightLibraryButton->setIcon(CompanionIcon("library.png"));
-  
+
   left.imageLabel =  ui->leftImageLabel;
   right.imageLabel = ui->rightImageLabel;
   left.fileNameEdit =  ui->leftFileNameEdit;
@@ -154,7 +169,7 @@ customizeSplashDialog::customizeSplashDialog(QWidget *parent) :
   right.libraryButton = ui->rightLibraryButton;
   left.invertButton = ui->leftInvertButton;
   right.invertButton = ui->rightInvertButton;
-  
+
   left.loadFwButton =  ui->leftLoadFwButton;
   right.loadFwButton =  ui->rightLoadFwButton;
   left.loadPictButton =  ui->leftLoadPictButton;
@@ -168,36 +183,36 @@ customizeSplashDialog::customizeSplashDialog(QWidget *parent) :
   resize(0,0);
 }
 
-customizeSplashDialog::~customizeSplashDialog()
+CustomizeSplashDialog::~CustomizeSplashDialog()
 {
   delete ui;
 }
 
-void customizeSplashDialog::on_copyRightToLeftButton_clicked() {
+void CustomizeSplashDialog::on_copyRightToLeftButton_clicked() {
   left.copyImage(right);
 }
-void customizeSplashDialog::on_copyLeftToRightButton_clicked() {
+void CustomizeSplashDialog::on_copyLeftToRightButton_clicked() {
 right.copyImage(left);
 }
 
 
-void customizeSplashDialog::on_leftLoadFwButton_clicked() {loadFirmware(left);}
-void customizeSplashDialog::on_rightLoadFwButton_clicked() {loadFirmware(right);}
-void customizeSplashDialog::loadFirmware(Side side)
+void CustomizeSplashDialog::on_leftLoadFwButton_clicked() {loadFirmware(left);}
+void CustomizeSplashDialog::on_rightLoadFwButton_clicked() {loadFirmware(right);}
+void CustomizeSplashDialog::loadFirmware(Side side)
 {
   QString fileName = QFileDialog::getOpenFileName(this, tr("Open Firmware File"), g.flashDir(), FLASH_FILES_FILTER);
   if (!fileName.isEmpty()) {
     if (!side.displayImage( fileName, FW ))
-      QMessageBox::critical(this, tr("Error"), tr("Can not load embedded image from firmware file %1.").arg(fileName));
+      QMessageBox::critical(this, CPN_STR_TTL_ERROR, tr("Can not load embedded image from firmware file %1.").arg(fileName));
     else
     g.flashDir( QFileInfo(fileName).dir().absolutePath() );
   }
   side.markSourceButton();
 }
 
-void customizeSplashDialog::on_leftLoadPictButton_clicked() {loadPicture(left);}
-void customizeSplashDialog::on_rightLoadPictButton_clicked() {loadPicture(right);}
-void customizeSplashDialog::loadPicture(Side side)
+void CustomizeSplashDialog::on_leftLoadPictButton_clicked() {loadPicture(left);}
+void CustomizeSplashDialog::on_rightLoadPictButton_clicked() {loadPicture(right);}
+void CustomizeSplashDialog::loadPicture(Side side)
 {
   QString supportedImageFormats;
   for (int formatIndex = 0; formatIndex < QImageReader::supportedImageFormats().count(); formatIndex++) {
@@ -208,42 +223,42 @@ void customizeSplashDialog::loadPicture(Side side)
 
   if (!fileName.isEmpty()) {
     if (!side.displayImage( fileName, PICT ))
-      QMessageBox::critical(this, tr("Error"), tr("Cannot load the image file %1.").arg(fileName));
+      QMessageBox::critical(this, CPN_STR_TTL_ERROR, tr("Cannot load the image file %1.").arg(fileName));
     else
       g.imagesDir( QFileInfo(fileName).dir().absolutePath() );
   }
   side.markSourceButton();
 }
 
-void customizeSplashDialog::on_leftLoadProfileButton_clicked() {loadProfile(left);}
-void customizeSplashDialog::on_rightLoadProfileButton_clicked() {loadProfile(right);}
-void customizeSplashDialog::loadProfile(Side side)
+void CustomizeSplashDialog::on_leftLoadProfileButton_clicked() {loadProfile(left);}
+void CustomizeSplashDialog::on_rightLoadProfileButton_clicked() {loadProfile(right);}
+void CustomizeSplashDialog::loadProfile(Side side)
 {
   QString fileName=g.profile[g.id()].splashFile();
 
   if (!fileName.isEmpty()) {
     if (!side.displayImage( fileName, PROFILE ))
-      QMessageBox::critical(this, tr("Error"), tr("Cannot load profile image %1.").arg(fileName));
+      QMessageBox::critical(this, CPN_STR_TTL_ERROR, tr("Cannot load profile image %1.").arg(fileName));
   }
   side.markSourceButton();
 }
 
-void customizeSplashDialog::on_leftLibraryButton_clicked(){libraryButton_clicked(left);}
-void customizeSplashDialog::on_rightLibraryButton_clicked(){libraryButton_clicked(right);}
-void customizeSplashDialog::libraryButton_clicked( Side side )
+void CustomizeSplashDialog::on_leftLibraryButton_clicked(){libraryButton_clicked(left);}
+void CustomizeSplashDialog::on_rightLibraryButton_clicked(){libraryButton_clicked(right);}
+void CustomizeSplashDialog::libraryButton_clicked( Side side )
 {
   QString fileName;
   SplashLibraryDialog *ld = new SplashLibraryDialog(this,&fileName);
   ld->exec();
   if (!fileName.isEmpty()) {
     if (!side.displayImage( fileName, UNDEFINED ))
-      QMessageBox::critical(this, tr("Error"), tr("Cannot load the library image %1.").arg(fileName));
+      QMessageBox::critical(this, CPN_STR_TTL_ERROR, tr("Cannot load the library image %1.").arg(fileName));
   }
 }
 
-void customizeSplashDialog::on_leftSaveButton_clicked(){saveButton_clicked(left);}
-void customizeSplashDialog::on_rightSaveButton_clicked(){saveButton_clicked(right);}
-void customizeSplashDialog::saveButton_clicked( Side side )
+void CustomizeSplashDialog::on_leftSaveButton_clicked(){saveButton_clicked(left);}
+void CustomizeSplashDialog::on_rightSaveButton_clicked(){saveButton_clicked(right);}
+void CustomizeSplashDialog::saveButton_clicked( Side side )
 {
   if (side.saveImage()){
     QMessageBox::information(this, tr("File Saved"), tr("The image was saved to the file %1").arg(*side.saveToFileName));
@@ -255,9 +270,9 @@ void customizeSplashDialog::saveButton_clicked( Side side )
     QMessageBox::critical(this, tr("File Save Error"), tr("Failed to write image to %1").arg(*side.saveToFileName));
 }
 
-void customizeSplashDialog::on_leftInvertButton_clicked(){invertButton_clicked(left);}
-void customizeSplashDialog::on_rightInvertButton_clicked(){invertButton_clicked(right);}
-void customizeSplashDialog::invertButton_clicked(Side side)
+void CustomizeSplashDialog::on_leftInvertButton_clicked(){invertButton_clicked(left);}
+void CustomizeSplashDialog::on_rightInvertButton_clicked(){invertButton_clicked(right);}
+void CustomizeSplashDialog::invertButton_clicked(Side side)
 {
   QImage image = side.imageLabel->pixmap()->toImage();
   image.invertPixels();

companion/src/customizesplashdialog.h

@@ -1,12 +1,32 @@
-#ifndef CUSTOMIZESPLASHDIALOG_H
-#define CUSTOMIZESPLASHDIALOG_H
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CUSTOMIZESPLASHDIALOG_H_
+#define _CUSTOMIZESPLASHDIALOG_H_
 
 #include <QtWidgets>
 #include "firmwareinterface.h"
 
 namespace Ui
 {
-  class customizeSplashDialog;
+  class CustomizeSplashDialog;
 }
 
 const int WIDTH_TARANIS = 212;
@@ -43,15 +63,15 @@ private:
   LCDFormat *format;
 };
 
-class customizeSplashDialog : public QDialog
+class CustomizeSplashDialog : public QDialog
 {
   Q_OBJECT
   Side left;
   Side right;
 
 public:
-  explicit customizeSplashDialog(QWidget *parent = 0);
-  ~customizeSplashDialog();
+  explicit CustomizeSplashDialog(QWidget *parent = 0);
+  ~CustomizeSplashDialog();
 
 private slots:
   void on_leftLoadFwButton_clicked();
@@ -79,8 +99,8 @@ private:
   void saveButton_clicked( Side );
   void invertButton_clicked( Side );
 
-  Ui::customizeSplashDialog *ui;
+  Ui::CustomizeSplashDialog *ui;
   enum sideEnum { LEFT, RIGHT };
 };
 
-#endif // CUSTOMIZESPLASHDIALOG_H
+#endif // _CUSTOMIZESPLASHDIALOG_H_

companion/src/customizesplashdialog.ui

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <ui version="4.0">
- <class>customizeSplashDialog</class>
- <widget class="QDialog" name="customizeSplashDialog">
+ <class>CustomizeSplashDialog</class>
+ <widget class="QDialog" name="CustomizeSplashDialog">
   <property name="enabled">
    <bool>true</bool>
   </property>

companion/src/datamodels/CMakeLists.txt

@@ -0,0 +1,24 @@
+
+set(datamodels_SRCS
+  rawitemdatamodels.cpp
+  rawitemfilteredmodel.cpp
+)
+
+set(datamodels_HDRS
+  rawitemdatamodels.h
+  rawitemfilteredmodel.h
+)
+
+qt5_wrap_cpp(datamodels_SRCS ${datamodels_HDRS})
+
+add_library(datamodels ${datamodels_SRCS} ${datamodels_HDRS})
+target_link_libraries(datamodels PRIVATE ${CPN_COMMON_LIB})
+
+target_include_directories(datamodels
+  PRIVATE
+    "${CMAKE_SOURCE_DIR}"
+    "${CMAKE_CURRENT_BINARY_DIR}"
+    "${COMPANION_SRC_DIRECTORY}"
+  PUBLIC
+    "${CMAKE_CURRENT_LIST_DIR}"
+)

companion/src/datamodels/rawitemdatamodels.cpp

@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "rawitemdatamodels.h"
+#include "generalsettings.h"
+#include "eeprominterface.h"
+#include "modeldata.h"
+
+RawSourceItemModel::RawSourceItemModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, QObject * parent) :
+  AbstractRawItemDataModel(generalSettings, modelData, parent)
+{
+  const Boards board = Boards(getCurrentBoard());
+  Firmware * fw = getCurrentFirmware();
+  const int anasCount = CPN_MAX_STICKS + board.getCapability(Board::Pots) + board.getCapability(Board::Sliders) +  board.getCapability(Board::MouseAnalogs);
+
+  addItems(SOURCE_TYPE_NONE,           RawSource::NoneGroup,     1);
+  for (int i=0; i < fw->getCapability(LuaScripts); i++)
+    addItems(SOURCE_TYPE_LUA_OUTPUT,   RawSource::ScriptsGroup,  fw->getCapability(LuaOutputsPerScript), i * 16);
+  addItems(SOURCE_TYPE_VIRTUAL_INPUT,  RawSource::InputsGroup,   fw->getCapability(VirtualInputs));
+  addItems(SOURCE_TYPE_STICK,          RawSource::SourcesGroup,  anasCount);
+  addItems(SOURCE_TYPE_ROTARY_ENCODER, RawSource::SourcesGroup,  fw->getCapability(RotaryEncoders));
+  addItems(SOURCE_TYPE_TRIM,           RawSource::TrimsGroup,    board.getCapability(Board::NumTrims));
+  addItems(SOURCE_TYPE_MAX,            RawSource::SourcesGroup,  1);
+  addItems(SOURCE_TYPE_SWITCH,         RawSource::SwitchesGroup, board.getCapability(Board::Switches));
+  addItems(SOURCE_TYPE_CUSTOM_SWITCH,  RawSource::SwitchesGroup, fw->getCapability(LogicalSwitches));
+  addItems(SOURCE_TYPE_CYC,            RawSource::SourcesGroup,  CPN_MAX_CYC);
+  addItems(SOURCE_TYPE_PPM,            RawSource::SourcesGroup,  fw->getCapability(TrainerInputs));
+  addItems(SOURCE_TYPE_CH,             RawSource::SourcesGroup,  fw->getCapability(Outputs));
+  addItems(SOURCE_TYPE_SPECIAL,        RawSource::TelemGroup,    5);
+  addItems(SOURCE_TYPE_TELEMETRY,      RawSource::TelemGroup,    CPN_MAX_SENSORS * 3);
+  addItems(SOURCE_TYPE_GVAR,           RawSource::GVarsGroup,    fw->getCapability(Gvars));
+}
+
+void RawSourceItemModel::setDynamicItemData(QStandardItem * item, const RawSource & src) const
+{
+  Board::Type board = getCurrentBoard();
+  item->setText(src.toString(modelData, generalSettings, board));
+  item->setData(src.isAvailable(modelData, generalSettings, board), IsAvailableRole);
+}
+
+void RawSourceItemModel::addItems(const RawSourceType & type, const int group, const int count, const int start)
+{
+  for (int i = start; i < start + count; i++) {
+    const RawSource src = RawSource(type, i);
+    QStandardItem * modelItem = new QStandardItem();
+    modelItem->setData(src.toValue(), ItemIdRole);
+    modelItem->setData(type, ItemTypeRole);
+    modelItem->setData(group, ItemFlagsRole);
+    setDynamicItemData(modelItem, src);
+    appendRow(modelItem);
+  }
+}
+
+void RawSourceItemModel::update() const
+{
+  for (int i=0; i < rowCount(); ++i)
+    setDynamicItemData(item(i), RawSource(item(i)->data(ItemIdRole).toInt()));
+}
+
+
+//
+// RawSwitchItemModel
+//
+
+RawSwitchItemModel::RawSwitchItemModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, QObject * parent) :
+  AbstractRawItemDataModel(generalSettings, modelData, parent)
+{
+  Boards board = Boards(getCurrentBoard());
+  Firmware * fw = getCurrentFirmware();
+
+  // Descending switch direction: NOT (!) switches
+  addItems(SWITCH_TYPE_SENSOR,         -CPN_MAX_SENSORS);
+  addItems(SWITCH_TYPE_TELEMETRY,      -1);
+  addItems(SWITCH_TYPE_FLIGHT_MODE,    -fw->getCapability(FlightModes));
+  addItems(SWITCH_TYPE_VIRTUAL,        -fw->getCapability(LogicalSwitches));
+  addItems(SWITCH_TYPE_ROTARY_ENCODER, -fw->getCapability(RotaryEncoders));
+  addItems(SWITCH_TYPE_TRIM,           -board.getCapability(Board::NumTrimSwitches));
+  addItems(SWITCH_TYPE_MULTIPOS_POT,   -(board.getCapability(Board::MultiposPots) * board.getCapability(Board::MultiposPotsPositions)));
+  addItems(SWITCH_TYPE_SWITCH,         -board.getCapability(Board::SwitchPositions));
+
+  // Ascending switch direction (including zero)
+  addItems(SWITCH_TYPE_TIMER_MODE, 5);
+  addItems(SWITCH_TYPE_NONE, 1);
+  addItems(SWITCH_TYPE_SWITCH,         board.getCapability(Board::SwitchPositions));
+  addItems(SWITCH_TYPE_MULTIPOS_POT,   board.getCapability(Board::MultiposPots) * board.getCapability(Board::MultiposPotsPositions));
+  addItems(SWITCH_TYPE_TRIM,           board.getCapability(Board::NumTrimSwitches));
+  addItems(SWITCH_TYPE_ROTARY_ENCODER, fw->getCapability(RotaryEncoders));
+  addItems(SWITCH_TYPE_VIRTUAL,        fw->getCapability(LogicalSwitches));
+  addItems(SWITCH_TYPE_FLIGHT_MODE,    fw->getCapability(FlightModes));
+  addItems(SWITCH_TYPE_TELEMETRY,      1);
+  addItems(SWITCH_TYPE_SENSOR,         CPN_MAX_SENSORS);
+  addItems(SWITCH_TYPE_ON,             1);
+  addItems(SWITCH_TYPE_ONE,            1);
+}
+
+void RawSwitchItemModel::setDynamicItemData(QStandardItem * item, const RawSwitch & rsw) const
+{
+  const Board::Type board = getCurrentBoard();
+  item->setText(rsw.toString(board, generalSettings, modelData));
+  item->setData(rsw.isAvailable(modelData, generalSettings, board), IsAvailableRole);
+}
+
+void RawSwitchItemModel::addItems(const RawSwitchType & type, int count)
+{
+  // Most RawSwitch() indices are one-based (vs. typical zero); these are exceptions to the rule:
+  const static QVector<int> rawSwitchIndexBaseZeroTypes = QVector<int>() << SWITCH_TYPE_NONE << SWITCH_TYPE_ON << SWITCH_TYPE_OFF << SWITCH_TYPE_TIMER_MODE;
+  // handle exceptions in RawSwitch() index values
+  const short rawIdxAdj = rawSwitchIndexBaseZeroTypes.contains(type) ? -1 : 0;
+
+  // determine cotext flags
+  int context = RawSwitch::AllSwitchContexts;
+  switch (type) {
+    case SWITCH_TYPE_FLIGHT_MODE:
+      context &= ~RawSwitch::MixesContext;
+    // fallthrough
+    case SWITCH_TYPE_VIRTUAL:
+    case SWITCH_TYPE_SENSOR:
+      context &= ~RawSwitch::GlobalFunctionsContext;
+      break;
+
+    case SWITCH_TYPE_TIMER_MODE:
+      context = RawSwitch::TimersContext;
+      break;
+
+    case SWITCH_TYPE_NONE:
+      context &= ~RawSwitch::TimersContext;
+      break;
+
+    case SWITCH_TYPE_ON:
+    case SWITCH_TYPE_ONE:
+      context = RawSwitch::SpecialFunctionsContext | RawSwitch::GlobalFunctionsContext;
+      break;
+
+    default:
+      break;
+  }
+
+  int i = (count < 0 ? count : 1);
+  count = (i < 0 ? 0 : count + i);
+  for ( ; i < count; ++i) {
+    RawSwitch rs(type, i + rawIdxAdj);
+    QStandardItem * modelItem = new QStandardItem();
+    modelItem->setData(rs.toValue(), ItemIdRole);
+    modelItem->setData(type, ItemTypeRole);
+    modelItem->setData(context, ItemFlagsRole);
+    setDynamicItemData(modelItem, rs);
+    appendRow(modelItem);
+  }
+}
+
+void RawSwitchItemModel::update() const
+{
+  for (int i=0; i < rowCount(); ++i)
+    setDynamicItemData(item(i), RawSwitch(item(i)->data(ItemIdRole).toInt()));
+}

companion/src/datamodels/rawitemdatamodels.h

@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef RAWITEMDATAMODELS_H
+#define RAWITEMDATAMODELS_H
+
+#include "rawsource.h"
+#include "rawswitch.h"
+
+#include <QStandardItemModel>
+
+class GeneralSettings;
+class ModelData;
+
+class AbstractRawItemDataModel: public QStandardItemModel
+{
+    Q_OBJECT
+  public:
+    enum DataRoles { ItemIdRole = Qt::UserRole, ItemTypeRole, ItemFlagsRole, IsAvailableRole };
+    Q_ENUM(DataRoles)
+
+    explicit AbstractRawItemDataModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, QObject * parent = nullptr)  :
+      QStandardItemModel(parent),
+      generalSettings(generalSettings),
+      modelData(modelData)
+    {}
+
+  public slots:
+    virtual void update() const = 0;
+
+  protected:
+    const GeneralSettings * generalSettings;
+    const ModelData * modelData;
+};
+
+
+class RawSourceItemModel: public AbstractRawItemDataModel
+{
+    Q_OBJECT
+  public:
+    explicit RawSourceItemModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, QObject * parent = nullptr);
+
+  public slots:
+    void update() const override;
+
+  protected:
+    void setDynamicItemData(QStandardItem * item, const RawSource & src) const;
+    void addItems(const RawSourceType & type, const int group, const int count, const int start = 0);
+};
+
+
+class RawSwitchItemModel: public AbstractRawItemDataModel
+{
+    Q_OBJECT
+  public:
+    explicit RawSwitchItemModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, QObject * parent = nullptr);
+
+  public slots:
+    void update() const override;
+
+  protected:
+    void setDynamicItemData(QStandardItem * item, const RawSwitch & rsw) const;
+    void addItems(const RawSwitchType & type, int count);
+};
+
+
+#endif // RAWITEMDATAMODELS_H

companion/src/datamodels/rawitemfilteredmodel.cpp

@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "rawitemfilteredmodel.h"
+#include "rawitemdatamodels.h"
+
+RawItemFilteredModel::RawItemFilteredModel(QAbstractItemModel * sourceModel, int flags, QObject * parent) :
+  QSortFilterProxyModel(parent),
+  filterFlags(0)
+{
+  setFilterRole(AbstractRawItemDataModel::IsAvailableRole);
+  setFilterKeyColumn(0);
+  setFilterFlags(flags);
+  setDynamicSortFilter(true);
+  setSourceModel(sourceModel);
+}
+
+void RawItemFilteredModel::setFilterFlags(int flags)
+{
+  if (filterFlags != flags) {
+    filterFlags = flags;
+    invalidateFilter();
+  }
+}
+
+bool RawItemFilteredModel::filterAcceptsRow(int sourceRow, const QModelIndex & sourceParent) const
+{
+  const QModelIndex & srcIdx = sourceModel()->index(sourceRow, 0, sourceParent);
+  if (!srcIdx.isValid() || !sourceModel()->data(srcIdx, filterRole()).toBool())
+    return false;
+
+  if (!filterFlags)
+    return true;
+
+  bool ok;
+  const int flags = sourceModel()->data(srcIdx, AbstractRawItemDataModel::ItemFlagsRole).toInt(&ok);
+  return (ok && (!flags || (filterFlags & flags)));
+}
+
+void RawItemFilteredModel::update() const
+{
+  AbstractRawItemDataModel * model = qobject_cast<AbstractRawItemDataModel *>(sourceModel());
+  if (model)
+    model->update();
+}
+
+
+RawSourceFilterItemModel::RawSourceFilterItemModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, int flags, QObject * parent) :
+  RawItemFilteredModel(new RawSourceItemModel(generalSettings, modelData, parent), flags, parent)
+{
+}
+
+
+RawSwitchFilterItemModel::RawSwitchFilterItemModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, int context, QObject * parent) :
+  RawItemFilteredModel(new RawSwitchItemModel(generalSettings, modelData, parent), context, parent)
+{
+}

companion/src/datamodels/rawitemfilteredmodel.h

@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef RAWITEMFILTEREDMODEL_H
+#define RAWITEMFILTEREDMODEL_H
+
+#include <QSortFilterProxyModel>
+
+class GeneralSettings;
+class ModelData;
+class RawSourceItemModel;
+class RawSwitchItemModel;
+
+class RawItemFilteredModel: public QSortFilterProxyModel
+{
+    Q_OBJECT
+  public:
+    explicit RawItemFilteredModel(QAbstractItemModel * sourceModel, int flags, QObject * parent = nullptr);
+    explicit RawItemFilteredModel(QAbstractItemModel * sourceModel, QObject * parent = nullptr) : RawItemFilteredModel(sourceModel, 0, parent) {}
+
+  public slots:
+    void setFilterFlags(int flags);
+    void update() const;
+
+  protected:
+    bool filterAcceptsRow(int sourceRow, const QModelIndex & sourceParent) const override;
+
+    int filterFlags;
+};
+
+
+// The specialized "convenience" types below can go away once centralalized RawSource/RawSwitch item models are established.
+// These proxy classes will automatically create a source model of the corresponding type.
+
+class RawSwitchFilterItemModel: public RawItemFilteredModel
+{
+    Q_OBJECT
+  public:
+    using RawItemFilteredModel::RawItemFilteredModel;
+
+    explicit RawSwitchFilterItemModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, int context, QObject * parent = nullptr);
+};
+
+
+class RawSourceFilterItemModel: public RawItemFilteredModel
+{
+    Q_OBJECT
+  public:
+    using RawItemFilteredModel::RawItemFilteredModel;
+
+    explicit RawSourceFilterItemModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, int flags, QObject * parent = nullptr);
+
+    explicit RawSourceFilterItemModel(const GeneralSettings * const generalSettings, const ModelData * const modelData, QObject * parent = nullptr) :
+      RawSourceFilterItemModel(generalSettings, modelData, 0, parent) {}
+};
+
+#endif // RAWITEMFILTEREDMODEL_H

companion/src/dialogs/filesyncdialog.cpp

@@ -0,0 +1,502 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "filesyncdialog.h"
+
+#include "autobitsetcheckbox.h"
+#include "autocheckbox.h"
+#include "autocombobox.h"
+#include "autolineedit.h"
+#include "constants.h"
+#include "helpers.h"
+#include "progresswidget.h"
+
+#include <QApplication>
+#include <QComboBox>
+#include <QCompleter>
+#include <QCheckBox>
+#include <QDir>
+#include <QFileDialog>
+#include <QFileSystemModel>
+#include <QLayout>
+#include <QLineEdit>
+#include <QMenu>
+#include <QSpinBox>
+
+FileSyncDialog::FileSyncDialog(QWidget * parent, const SyncProcess::SyncOptions & syncOptions) :
+  QDialog(parent),
+  m_syncOptions(syncOptions),
+  m_running(false)
+{
+  setWindowTitle(tr("Synchronize Files"));
+  setWindowFlags(windowFlags() & ~Qt::WindowContextHelpButtonHint);
+  setSizeGripEnabled(true);
+
+  setupUi();
+  toggleExtraOptions(false);
+  validate();
+  updateRunningState();
+}
+
+void FileSyncDialog::reject()
+{
+  // override close event via window system close or esc. key
+  if (m_running) {
+    if (QMessageBox::question(this, CPN_STR_APP_NAME, tr("Are you sure you wish to abort the sync?")) == QMessageBox::No)
+      return;
+    emit stopSync();
+    // Force termination if the sync hasn't finished within 5s
+    QElapsedTimer tim;
+    tim.start();
+    while (!tim.hasExpired(5000) && m_running)
+      QApplication::processEvents(QEventLoop::ExcludeUserInputEvents, 10);
+    if (m_running)
+      qWarning() << "Terminating thread while Sync process was still running.";
+  }
+  QDialog::reject();
+}
+
+// Create a widget with a line edit and folder select button and handles all interactions. Features autosuggest
+//   path hints while typing, invalid paths shown in red.
+// This should probably be moved some place more reusable, esp. the QFileSystemModel.
+static QWidget * folderSelectorWidget(QLineEdit * le, QWidget * parent)
+{
+  static QFileSystemModel fileModel;
+  static bool init = false;
+  if (!init) {
+    init = true;
+    fileModel.setFilter(QDir::Dirs);
+    fileModel.setRootPath("/");
+  }
+
+  QWidget * fsw = new QWidget(parent);
+  //le = new QLineEdit(parent);
+  QCompleter * fsc = new QCompleter(fsw);
+  fsc->setModel(&fileModel);
+  //fsc->setCompletionMode(QCompleter::InlineCompletion);
+  le->setCompleter(fsc);
+
+  QToolButton * btn = new QToolButton(fsw);
+  btn->setIcon(CompanionIcon("open.png"));
+  QHBoxLayout * l = new QHBoxLayout(fsw);
+  l->setContentsMargins(0,0,0,0);
+  l->setSpacing(3);
+  l->addWidget(le);
+  l->addWidget(btn);
+
+  QObject::connect(btn, &QToolButton::clicked, [=]() {
+    QString dir = QFileDialog::getExistingDirectory(parent, fsw->property("fileDialogTitle").toString(), le->text(), 0);
+    if (!dir.isEmpty()) {
+      le->setText(QDir::toNativeSeparators(dir));
+      le->setFocus();
+    }
+  });
+
+  QObject::connect(le, &QLineEdit::textChanged, [=](const QString & text) {
+    if (QFile::exists(text))
+      le->setStyleSheet("");
+    else
+      le->setStyleSheet("QLineEdit {color: red;}");
+  });
+
+  return fsw;
+}
+
+void FileSyncDialog::setupUi()
+{
+  const QString srcArw = CPN_STR_SW_INDICATOR_UP % " ";
+  const QString dstArw = CPN_STR_SW_INDICATOR_DN % " ";
+  int row = 0;
+
+  CompanionIcon playIcon("play.png");
+  playIcon.addImage("stop.png", QIcon::Normal, QIcon::On);
+
+  QLabel * lblSrc = new QLabel(tr("Source Folder:"), this);
+  AutoLineEdit * leSrc =  new AutoLineEdit(this, true);
+  leSrc->setField(m_syncOptions.folderA);
+  leSrc->setText(QDir::toNativeSeparators(m_syncOptions.folderA));
+  QWidget * wdgSrc = folderSelectorWidget(leSrc, this);
+
+  QLabel * lblDst = new QLabel(tr("Destination Folder:"), this);
+  AutoLineEdit * leDst =  new AutoLineEdit(this, true);
+  leDst->setField(m_syncOptions.folderB);
+  leDst->setText(QDir::toNativeSeparators(m_syncOptions.folderB));
+  QWidget * wdgDst = folderSelectorWidget(leDst, this);
+
+  AutoComboBox * syncDir = new AutoComboBox(this);
+  syncDir->addItem(tr("%1%2 Both directions, to destination folder first").arg(dstArw, srcArw), SyncProcess::SYNC_A2B_B2A);
+  syncDir->addItem(tr("%1%2 Both directions, to source folder first").arg(srcArw, dstArw), SyncProcess::SYNC_B2A_A2B);
+  syncDir->addItem(tr(" %1  Only from source folder to destination folder").arg(dstArw), SyncProcess::SYNC_A2B);
+  syncDir->addItem(tr(" %1  Only from destination folder to source folder").arg(srcArw), SyncProcess::SYNC_B2A);
+  syncDir->setCurrentIndex(-1);  // we set the default option later
+
+  AutoComboBox * copyMode = new AutoComboBox(this);
+  copyMode->setToolTip(tr("How to handle overwriting files which already exist in the destination folder."));
+  copyMode->addItem(tr("Copy only if newer and different (compare contents)"), SyncProcess::OVERWR_NEWER_IF_DIFF);
+  copyMode->addItem(tr("Copy only if newer (do not compare contents)"), SyncProcess::OVERWR_NEWER_ALWAYS);
+  copyMode->addItem(tr("Copy only if different (ignore file time stamps)"), SyncProcess::OVERWR_IF_DIFF);
+  copyMode->addItem(tr("Always copy (force overwite existing files)"), SyncProcess::OVERWR_ALWAYS);
+  copyMode->setField(m_syncOptions.compareType);
+
+  QSpinBox * maxSize = new QSpinBox(this);
+  maxSize->setRange(0, 100 * 1024);
+  maxSize->setAccelerated(true);
+  maxSize->setSpecialValueText(tr("Any size"));
+  maxSize->setToolTip(tr("Skip files larger than this size. Enter zero for unlimited."));
+  maxSize->setGroupSeparatorShown(true);
+  maxSize->setValue(0);  // we set the real default value later
+
+  AutoComboBox * logLevel = new AutoComboBox(this);
+  logLevel->setToolTip(tr("Minimum reporting level. Events of this type and of higher importance are shown.\n" \
+                          "WARNING: High log rates may make the user interface temporarily unresponsive."));
+  logLevel->addItem(tr("Skipped"), QtDebugMsg);
+  logLevel->addItem(tr("Created"), QtInfoMsg);
+  logLevel->addItem(tr("Updated"), QtWarningMsg);
+  //logLevel->addItem(tr("Item Deleted"), QtCriticalMsg);  // unused
+  logLevel->addItem(tr("Errors Only"), QtFatalMsg);
+  logLevel->setField(m_syncOptions.logLevel);
+
+  AutoBitsetCheckBox * testRun = new AutoBitsetCheckBox(m_syncOptions.flags, SyncProcess::OPT_DRY_RUN, tr("Test-run only"), this);
+  testRun->setToolTip(tr("Run as normal but do not actually copy anything. Useful for verifying results before real sync."));
+
+  // layout to hold size spinbox and checkbox option(s)
+  QHBoxLayout * hlay1 = new QHBoxLayout();
+  hlay1->addWidget(maxSize, 1);
+  hlay1->addWidget(testRun);
+  hlay1->addWidget(new QLabel(tr("Log Level:"), this));
+  hlay1->addWidget(logLevel);
+
+  // "extra" options
+
+  QLabel * lbFilter = new QLabel(tr("Filters:"), this);
+  lbFilter->setToolTip(tr("The \"Include\" filter will only copy files which match the pattern(s).\n" \
+                          "The \"Exclude\" filter will skip files matching the filter pattern(s).\n" \
+                          "The Include filter is evaluated first."));
+
+  AutoLineEdit * leFiltExc = new AutoLineEdit(this, true);
+  leFiltExc->setField(m_syncOptions.excludeFilter);
+  leFiltExc->setToolTip(tr("One or more file pattern(s) to exclude, separated by commas.\n" "Blank means exclude none. ?, *, and [...] wildcards accepted."));
+
+  AutoLineEdit * leFiltInc = new AutoLineEdit(this, true);
+  leFiltInc->setField(m_syncOptions.includeFilter);
+  leFiltInc->setToolTip(tr("One or more file pattern(s) to include, separated by commas.\n" "Blank means include all. ?, *, and [...] wildcards accepted."));
+
+  // layout to hold filter options
+  QHBoxLayout * filtLo = new QHBoxLayout();
+  filtLo->addWidget(new QLabel(tr("Include:"), this));
+  filtLo->addWidget(leFiltInc, 1);
+  filtLo->addWidget(new QLabel(tr("Exclude:"), this));
+  filtLo->addWidget(leFiltExc, 1);
+
+  // file options
+  QHBoxLayout * filOptsLo = new QHBoxLayout();
+  filOptsLo->addWidget(new AutoBitsetCheckBox(m_syncOptions.dirFilterFlags, QDir::CaseSensitive, tr("Case sensitive"), this));
+  filOptsLo->addWidget(new AutoBitsetCheckBox(m_syncOptions.dirFilterFlags, QDir::NoSymLinks, true, tr("Follow links"), this));
+  filOptsLo->addWidget(new AutoBitsetCheckBox(m_syncOptions.dirFilterFlags, QDir::Hidden, tr("Include hidden"), this));
+
+  // folder options
+  QHBoxLayout * dirOptsLo = new QHBoxLayout();
+  dirOptsLo->addWidget(new AutoBitsetCheckBox(m_syncOptions.flags, SyncProcess::OPT_RECURSIVE, tr("Recursive"), this));
+  dirOptsLo->addWidget(new AutoBitsetCheckBox(m_syncOptions.flags, SyncProcess::OPT_SKIP_DIR_LINKS, true, tr("Follow links"), this));
+  dirOptsLo->addWidget(new AutoBitsetCheckBox(m_syncOptions.dirFilterFlags, QDir::Dirs, true, tr("Skip empty"), this));
+  dirOptsLo->addWidget(new AutoBitsetCheckBox(m_syncOptions.dirFilterFlags, QDir::AllDirs, true, tr("Apply filters"), this));
+
+  // extra options container widget and layout
+  ui_extraOptions = new QWidget(this);
+  ui_extraOptions->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Minimum);
+
+  QGridLayout * xOptsLay = new QGridLayout(ui_extraOptions);
+  xOptsLay->setContentsMargins(0, 0, 0, 0);
+  xOptsLay->addWidget(lbFilter, row, 0);
+  xOptsLay->addLayout(filtLo, row++, 1);
+  xOptsLay->addWidget(new QLabel(tr("Filter Options:"), this), row, 0);
+  xOptsLay->addLayout(filOptsLo, row++, 1);
+  xOptsLay->addWidget(new QLabel(tr("Folder Options:"), this), row, 0);
+  xOptsLay->addLayout(dirOptsLo, row++, 1);
+
+  // status label
+  ui_statusLabel = new QLabel(this);
+  // progress widget
+  ui_progress = new ProgressWidget(this);
+  ui_progress->setMinimumWidth(0);
+  ui_progress->setVisible(false);
+
+  // dialog buttons & menu
+
+  QMenu * optionsMenu = new QMenu(tr("Options"));
+  QAction * xtrasAct = optionsMenu->addAction(CompanionIcon("fuses.png"), tr("Show extra options"), this, &FileSyncDialog::toggleExtraOptions);
+  xtrasAct->setCheckable(true);
+  connect(this, &FileSyncDialog::extraOptionsToggled, xtrasAct, &QAction::setChecked);
+  optionsMenu->addAction(CompanionIcon("paintbrush.png"), tr("Reset to defaults"), this, &FileSyncDialog::resetOptions);
+
+  QToolButton * btnOpts = new QToolButton(this);
+  btnOpts->setDefaultAction(xtrasAct);
+  btnOpts->setMenu(optionsMenu);
+  btnOpts->setToolButtonStyle(Qt::ToolButtonIconOnly);
+  btnOpts->setPopupMode(QToolButton::MenuButtonPopup);
+  btnOpts->setToolTip(xtrasAct->text());
+
+  ui_btnStartStop = new QToolButton(this);
+  ui_btnStartStop->setCheckable(true);
+  ui_btnStartStop->setIcon(playIcon);
+  ui_btnStartStop->setToolButtonStyle(Qt::ToolButtonTextBesideIcon);
+
+  ui_btnClose = new QToolButton(this);
+  ui_btnClose->setText(tr("Close"));
+  ui_btnClose->setToolButtonStyle(Qt::ToolButtonTextOnly);
+  ui_btnClose->setSizePolicy(QSizePolicy::Maximum, QSizePolicy::Expanding);
+
+  ui_buttonBox = new QDialogButtonBox(this);
+  ui_buttonBox->addButton(btnOpts, QDialogButtonBox::ActionRole);
+  ui_buttonBox->addButton(ui_btnStartStop, QDialogButtonBox::ActionRole);
+  ui_buttonBox->addButton(ui_btnClose, QDialogButtonBox::RejectRole);
+
+  // The options group box.
+  ui_optionsPanel = new QGroupBox(tr("Options"), this);
+  QGridLayout * optsLay = new QGridLayout(ui_optionsPanel);
+  row = 0;
+  optsLay->addWidget(lblSrc, row, 0);
+  optsLay->addWidget(wdgSrc, row++, 1);
+  optsLay->addWidget(lblDst, row, 0);
+  optsLay->addWidget(wdgDst, row++, 1);
+  optsLay->addWidget(new QLabel(tr("Sync. Direction:"), this), row, 0);
+  optsLay->addWidget(syncDir, row++, 1);
+  optsLay->addWidget(new QLabel(tr("Existing Files:"), this), row, 0);
+  optsLay->addWidget(copyMode, row++, 1);
+  optsLay->addWidget(new QLabel(tr("Max. File Size:"), this), row, 0);
+  optsLay->addLayout(hlay1, row++, 1);
+  optsLay->addWidget(ui_extraOptions, row, 0, 1, 2);
+
+  // layout to hold warning label and button box
+  QHBoxLayout * hlay2 = new QHBoxLayout();
+  hlay2->addWidget(ui_statusLabel, 1);
+  hlay2->addWidget(ui_buttonBox);
+
+  // Create main layout and add options, progress, buttons.
+  QVBoxLayout * dlgL = new QVBoxLayout(this);
+  dlgL->addWidget(ui_optionsPanel, 0, Qt::AlignTop);
+  dlgL->addLayout(hlay2);
+  dlgL->addWidget(ui_progress, 1);
+
+  // Connect all signal handlers
+
+  // source path
+  connect(leSrc, &AutoLineEdit::textChanged, this, &FileSyncDialog::validate);
+  // destination path
+  connect(leDst, &AutoLineEdit::textChanged, this, &FileSyncDialog::validate);
+
+  // function to dis/enable the OVERWR_ALWAYS option depending on sync direction
+  connect(syncDir, &AutoComboBox::currentDataChanged, [=](int dir) {
+    int idx = copyMode->findData(SyncProcess::OVERWR_ALWAYS);
+    int flg = (dir == SyncProcess::SYNC_A2B || dir == SyncProcess::SYNC_B2A) ? 33 : 0;
+    if (!flg && idx == copyMode->currentIndex())
+      copyMode->setCurrentIndex(copyMode->findData(SyncProcess::OVERWR_NEWER_IF_DIFF));
+    copyMode->setItemData(idx, flg, Qt::UserRole - 1);
+  });
+
+  // function to set magnitude of file size spinbox, KB or MB
+  connect(maxSize, static_cast<void(QSpinBox::*)(int)>(&QSpinBox::valueChanged), [=](int value) {
+    const QSignalBlocker blocker(maxSize);
+    int multi = maxSize->property("multi").isValid() ? maxSize->property("multi").toInt() : 0;
+    if (value >= 10 * 1024 && multi != 1024 * 1024) {
+      // KB -> MB
+      multi = 1024 * 1024;
+      maxSize->setValue(value / 1024);
+      maxSize->setMaximum(100);
+      maxSize->setSingleStep(1);
+      maxSize->setSuffix(tr(" MB"));
+    }
+    else if ((value < 10 && multi != 1024) || !multi) {
+      // MB -> KB
+      if (multi)
+        value *= 1024;
+      multi = 1024;
+      if (value == 9 * 1024)
+        value += 1024 - 32;  // avoid large jump when stepping from 10MB to 10,208KB
+      maxSize->setMaximum(100 * 1024);
+      maxSize->setValue(value);
+      maxSize->setSingleStep(32);
+      maxSize->setSuffix(tr(" KB"));
+    }
+    maxSize->setProperty("multi", multi);
+    m_syncOptions.maxFileSize = value * multi;
+  });
+
+  // we set these after connections are made because we want the signal processors to run
+  syncDir->setField(m_syncOptions.direction);
+  maxSize->setValue(m_syncOptions.maxFileSize / 1024);
+
+  // connect Reset action to all fields
+  for (AutoLineEdit * a : ui_optionsPanel->findChildren<AutoLineEdit *>())
+    connect(this, &FileSyncDialog::optionsWereReset, a, &AutoLineEdit::updateValue);
+  for (AutoComboBox * a : ui_optionsPanel->findChildren<AutoComboBox *>())
+    connect(this, &FileSyncDialog::optionsWereReset, a, &AutoComboBox::updateValue);
+  for (AutoBitsetCheckBox * a : ui_optionsPanel->findChildren<AutoBitsetCheckBox *>())
+    connect(this, &FileSyncDialog::optionsWereReset, a, &AutoBitsetCheckBox::updateValue);
+  connect(this, &FileSyncDialog::optionsWereReset, [=]() { maxSize->setValue(m_syncOptions.maxFileSize / 1024); });
+
+  // React to name changes for source and destination path labels
+  connect(this, &FileSyncDialog::folderNameAChanged, [=](const QString &text) {
+    lblSrc->setText(text % ":");
+    wdgSrc->setProperty("fileDialogTitle", text);
+  });
+  connect(this, &FileSyncDialog::folderNameBChanged, [=](const QString &text) {
+    lblDst->setText(text % ":");
+    wdgDst->setProperty("fileDialogTitle", text);
+  });
+
+  // button actions
+  connect(ui_btnStartStop, &QPushButton::clicked,           this, &FileSyncDialog::toggleSync);
+  connect(ui_buttonBox,    &QDialogButtonBox::rejected,     this, &QDialog::reject);
+  connect(ui_buttonBox,    &QDialogButtonBox::accepted,     this, &QDialog::accept);
+  connect(ui_progress,     &ProgressWidget::detailsToggled, this, &FileSyncDialog::adjustSizeDelayed);
+}
+
+void FileSyncDialog::toggleSync(bool)
+{
+  if (m_running) {
+    setCursor(Qt::WaitCursor);
+    emit stopSync();
+    return;
+  }
+
+  ui_progress->clearDetails();
+  ui_progress->setInfo("");
+  SyncProcess * syncProcess = new SyncProcess(m_syncOptions);
+
+  // move sync process to separate thread, we only use signals/slots from here on...
+  QThread * syncThread = new QThread(this);
+  syncProcess->moveToThread(syncThread);
+
+  // ...and quite a few of them!
+  connect(this,        &FileSyncDialog::startSync,     syncProcess, &SyncProcess::run);
+  connect(this,        &FileSyncDialog::stopSync,      syncProcess, &SyncProcess::stop);
+  connect(syncProcess, &SyncProcess::started,          this,        &FileSyncDialog::onSyncStarted);
+  connect(syncProcess, &SyncProcess::finished,         this,        &FileSyncDialog::onSyncFinished);
+  connect(syncProcess, &SyncProcess::statusMessage,    this,        &FileSyncDialog::setStatusText);
+  connect(syncProcess, &SyncProcess::statusUpdate,     this,        &FileSyncDialog::onStatusUpdate);
+  connect(syncProcess, &SyncProcess::fileCountChanged, ui_progress, &ProgressWidget::setMaximum);
+  connect(syncProcess, &SyncProcess::progressMessage,  ui_progress, &ProgressWidget::addMessage);
+  connect(syncProcess, &SyncProcess::finished,         syncThread,  &QThread::quit);
+  connect(syncThread,  &QThread::finished,             syncThread,  &QThread::deleteLater);
+  connect(syncThread,  &QThread::destroyed,            syncProcess, &SyncProcess::deleteLater);
+
+  // go
+  syncThread->start(QThread::LowPriority);
+  emit startSync();
+}
+
+void FileSyncDialog::onSyncStarted()
+{
+  m_running = true;
+  updateRunningState();
+}
+
+void FileSyncDialog::onSyncFinished()
+{
+  m_running = false;
+  updateRunningState();
+  if (parentWidget())
+    QApplication::alert(parentWidget());
+}
+
+void FileSyncDialog::updateRunningState()
+{
+  ui_btnStartStop->setChecked(m_running);
+  ui_optionsPanel->setEnabled(!m_running);
+  ui_btnClose->setEnabled(!m_running);
+  ui_btnStartStop->setText(m_running ? tr("Abort") : tr("Start"));
+  if (m_running) {
+    ui_progress->setVisible(true);  // don't hide after run
+  }
+  else {
+    setCursor(Qt::ArrowCursor);     // in case we set a wait cursor upon abort request
+  }
+}
+
+void FileSyncDialog::onStatusUpdate(const SyncProcess::SyncStatus & stat)
+{
+  static const QString reportTemplate = tr("Total: <b>%1</b>; Created: <b>%2</b>; Updated: <b>%3</b>; Skipped: <b>%4</b>; Errors: <font color=%6><b>%5</b></font>;");
+  ui_progress->setInfo((stat.index < stat.count ? tr("Current: <b>%1</b> of ").arg(stat.index) : "") % reportTemplate.arg(stat.count).arg(stat.created).arg(stat.updated).arg(stat.skipped).arg(stat.errored).arg(stat.errored ? "red" : "black"));
+  ui_progress->setValue(stat.index);
+}
+
+void FileSyncDialog::setSyncOptions(const SyncProcess::SyncOptions & syncOptions)
+{
+  m_syncOptions = syncOptions;
+  emit optionsWereReset();
+}
+
+void FileSyncDialog::resetOptions()
+{
+  m_syncOptions.reset();
+  emit optionsWereReset();
+}
+
+void FileSyncDialog::toggleExtraOptions(bool show)
+{
+  ui_extraOptions->setVisible(show);
+  if (!ui_progress->detailsVisible())
+    adjustSizeDelayed();
+  m_extraOptionsVisible = show;
+  emit extraOptionsToggled(show);
+}
+
+void FileSyncDialog::setFolderNameA(const QString & name)
+{
+  if (m_folderNameA != name) {
+    m_folderNameA = name;
+    emit folderNameAChanged(name);
+  }
+}
+
+void FileSyncDialog::setFolderNameB(const QString & name)
+{
+  if (m_folderNameB != name) {
+    m_folderNameB = name;
+    emit folderNameBChanged(name);
+  }
+}
+
+void FileSyncDialog::setStatusText(const QString & text, int type)
+{
+  ui_statusLabel->setText(text);
+  ui_statusLabel->setStyleSheet(type != QtInfoMsg && type >= QtWarningMsg ?  "QLabel { color: red; }:" : "");
+}
+
+bool FileSyncDialog::validate()
+{
+  QString msg;
+  if (m_syncOptions.folderA.isEmpty() || !QFileInfo(m_syncOptions.folderA).exists())
+    msg = tr("Source folder not found.");
+  else if (m_syncOptions.folderB.isEmpty() || !QFileInfo(m_syncOptions.folderB).exists())
+    msg = tr("Destination folder not found.");
+  else if (QFileInfo(m_syncOptions.folderA).canonicalFilePath() == QFileInfo(m_syncOptions.folderB).canonicalFilePath())
+    msg = tr("Source and destination folders are the same.");
+
+  setStatusText(msg, QtCriticalMsg);
+  ui_btnStartStop->setEnabled(msg.isEmpty());
+  return msg.isEmpty();
+}
+
+void FileSyncDialog::adjustSizeDelayed()
+{
+  QTimer::singleShot(0, [=]() { adjustSize(); });
+}

companion/src/dialogs/filesyncdialog.h

@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef FILESYNCDIALOG_H
+#define FILESYNCDIALOG_H
+
+#include "process_sync.h"
+
+#include <QDialog>
+#include <QDialogButtonBox>
+#include <QGroupBox>
+#include <QLabel>
+#include <QToolButton>
+
+class ProgressWidget;
+
+class FileSyncDialog : public QDialog
+{
+    Q_OBJECT
+    Q_PROPERTY(SyncProcess::SyncOptions syncOptions READ syncOptions WRITE setSyncOptions RESET resetOptions NOTIFY optionsWereReset)
+    Q_PROPERTY(bool extraOptionsVisible READ extraOptionsVisible WRITE toggleExtraOptions NOTIFY extraOptionsToggled)
+    Q_PROPERTY(QString folderNameA READ folderNameA WRITE setFolderNameA NOTIFY folderNameAChanged)
+    Q_PROPERTY(QString folderNameB READ folderNameB WRITE setFolderNameB NOTIFY folderNameBChanged)
+
+  public:
+    FileSyncDialog(QWidget * parent = nullptr, const SyncProcess::SyncOptions & syncOptions = SyncProcess::SyncOptions());
+
+    inline SyncProcess::SyncOptions syncOptions() const { return m_syncOptions; }
+    void setSyncOptions(const SyncProcess::SyncOptions & syncOptions);
+    void resetOptions();
+
+    inline bool extraOptionsVisible() const { return m_extraOptionsVisible; }
+    void toggleExtraOptions(bool show);
+
+    inline QString folderNameA() const { return m_folderNameA; }
+    void setFolderNameA(const QString & name);
+
+    inline QString folderNameB() const { return m_folderNameB; }
+    void setFolderNameB(const QString & name);
+
+  public slots:
+    virtual void reject() override;
+    void setStatusText(const QString & text, int type = QtWarningMsg);
+    bool validate();
+
+  signals:
+    void startSync();
+    void stopSync();
+    void folderNameAChanged(const QString & name);
+    void folderNameBChanged(const QString & name);
+    void extraOptionsToggled(bool show);
+    void optionsWereReset();
+
+  private slots:
+    void setupUi();
+    void toggleSync(bool);
+    void onSyncStarted();
+    void onSyncFinished();
+    void updateRunningState();
+    void onStatusUpdate(const SyncProcess::SyncStatus & stat);
+    void adjustSizeDelayed();
+
+  private:
+    SyncProcess::SyncOptions m_syncOptions;
+    QString m_folderNameA;
+    QString m_folderNameB;
+    bool m_running;
+    bool m_extraOptionsVisible;
+
+    QGroupBox * ui_optionsPanel;
+    QWidget * ui_extraOptions;
+    ProgressWidget * ui_progress;
+    QDialogButtonBox * ui_buttonBox;
+    QToolButton * ui_btnStartStop;
+    QToolButton * ui_btnClose;
+    QLabel * ui_statusLabel;
+};
+
+#endif // FILESYNCDIALOG_H

companion/src/downloaddialog.cpp

@@ -1,12 +1,36 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
 #include "downloaddialog.h"
 #include "ui_downloaddialog.h"
-#include <QTime>
+#include "constants.h"
 #include "helpers.h"
 
+#include <QTime>
+
 downloadDialog::downloadDialog(QWidget *parent, QString src, QString tgt):
   QDialog(parent),
   ui(new Ui::downloadDialog),
-  file(NULL)
+  reply(nullptr),
+  file(nullptr),
+  aborted(false)
 {
     ui->setupUi(this);
     setWindowIcon(CompanionIcon("fwpreferences.png"));
@@ -21,7 +45,7 @@ downloadDialog::downloadDialog(QWidget *parent, QString src, QString tgt):
 
     file = new QFile(tgt);
     if (!file->open(QIODevice::WriteOnly)) {
-      QMessageBox::critical(this, "Companion",
+      QMessageBox::critical(this, CPN_STR_APP_NAME,
           tr("Unable to save the file %1: %2.")
           .arg(tgt).arg(file->errorString()));
       QTimer::singleShot(0, this, SLOT(fileError()));
@@ -40,29 +64,38 @@ downloadDialog::~downloadDialog()
   delete file;
 }
 
+void downloadDialog::reject()
+{
+  if (reply && reply->isRunning()) {
+    aborted = true;
+    reply->abort();  // this will call QNetworkReply::finished()
+    return;
+  }
+
+  QDialog::reject();
+}
+
 void downloadDialog::httpFinished()
 {
-    file->flush();
-    file->close();
+  file->flush();
+  file->close();
 
-    bool ok = true;
-    if (reply->error()) {
-        file->remove();
-        QMessageBox::information(this, tr("Companion"),
-                                 tr("Download failed: %1.")
-                                 .arg(reply->errorString()));
-        ok = false;
-    }
+  const bool ok = !(reply->error() || aborted);
+  if (!ok) {
+    file->remove();
+    if (!aborted)
+      QMessageBox::information(this, CPN_STR_APP_NAME, tr("Download failed: %1.").arg(reply->errorString()));
+  }
 
-    reply->deleteLater();
-    reply = 0;
-    delete file;
-    file = NULL;
+  reply->deleteLater();
+  reply = nullptr;
+  file->deleteLater();
+  file = nullptr;
 
-    if (ok)
-      accept();
-    else
-      reject();
+  if (ok)
+    accept();
+  else
+    reject();
 }
 
 void downloadDialog::httpReadyRead()
@@ -91,7 +124,7 @@ void downloadDialog::closeEvent( QCloseEvent * event)
   // Delay closing 2 seconds to avoid unpleasant flashing download dialogs
   QTime closeTime= QTime::currentTime().addSecs(2);
   while( QTime::currentTime() < closeTime )
-    QCoreApplication::processEvents(QEventLoop::AllEvents, 100);   
+    QCoreApplication::processEvents(QEventLoop::AllEvents, 100);
 
   event->accept();
 }

companion/src/downloaddialog.h

@@ -1,5 +1,25 @@
-#ifndef DOWNLOADDIALOG_H
-#define DOWNLOADDIALOG_H
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DOWNLOADDIALOG_H_
+#define _DOWNLOADDIALOG_H_
 
 #include <QtWidgets>
 #include <QNetworkAccessManager>
@@ -19,6 +39,9 @@ public:
     explicit downloadDialog(QWidget *parent = 0, QString src = "", QString tgt = "");
     ~downloadDialog();
 
+  public slots:
+    virtual void reject() override;
+
 private slots:
     void fileError();
     void httpFinished();
@@ -34,7 +57,7 @@ private:
     QNetworkAccessManager qnam;
     QNetworkReply *reply;
     QFile *file;
-
+    bool aborted;
 };
 
-#endif // DOWNLOADDIALOG_H
+#endif // _DOWNLOADDIALOG_H_

companion/src/firmwares/CMakeLists.txt

@@ -0,0 +1,46 @@
+
+set(firmwares_SRCS
+  boards.cpp
+  curvereference.cpp
+  customfunctiondata.cpp
+  eeprominterface.cpp
+  generalsettings.cpp
+  gvardata.cpp
+  io_data.cpp
+  logicalswitchdata.cpp
+  modeldata.cpp
+  moduledata.cpp
+  multiprotocols.cpp
+  radiodata.cpp
+  radiodataconversionstate.cpp
+  rawsource.cpp
+  rawswitch.cpp
+  sensordata.cpp
+  telem_data.cpp
+  er9x/er9xeeprom.cpp
+  er9x/er9xinterface.cpp
+  ersky9x/ersky9xeeprom.cpp
+  ersky9x/ersky9xinterface.cpp
+  opentx/opentxeeprom.cpp
+  opentx/opentxinterface.cpp
+  )
+
+string(REPLACE ".cpp" ".h" firmwares_HDRS "${firmwares_SRCS}")
+
+list(APPEND firmwares_HDRS
+  eepromimportexport.h
+  moduledata.h
+  )
+
+add_library(firmwares ${firmwares_SRCS} ${firmwares_HDRS})
+target_link_libraries(firmwares ${CPN_COMMON_LIB} Qt5::Core Qt5::Xml Qt5::Widgets)
+target_include_directories(firmwares
+  PRIVATE
+    ${CMAKE_SOURCE_DIR}
+    ${CMAKE_CURRENT_BINARY_DIR}
+  PUBLIC
+    "${CMAKE_CURRENT_LIST_DIR}"
+    "${CMAKE_CURRENT_LIST_DIR}/er9x"
+    "${CMAKE_CURRENT_LIST_DIR}/ersky9x"
+    "${CMAKE_CURRENT_LIST_DIR}/opentx"
+  )

companion/src/firmwares/boards.cpp

@@ -0,0 +1,427 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "boards.h"
+#include "macros.h"
+
+// TODO remove all those constants
+// Update: These are now all only used within this class.
+//  External access is only via getEEpromSize() and getFlashSize()
+
+#define EESIZE_STOCK                   2048
+#define EESIZE_M128                    4096
+#define EESIZE_GRUVIN9X                4096
+#define EESIZE_TARANIS                 (32*1024)
+#define EESIZE_SKY9X                   (128*4096)
+#define EESIZE_9XRPRO                  (128*4096)
+#define EESIZE_MAX                     EESIZE_9XRPRO
+
+// getFlashSize() (and these macros) is only used by radiointerface::getDfuArgs (perhaps can find a better way?)
+#define FSIZE_STOCK                    (64*1024)
+#define FSIZE_M128                     (128*1024)
+#define FSIZE_GRUVIN9X                 (256*1024)
+#define FSIZE_TARANIS                  (512*1024)
+#define FSIZE_SKY9X                    (256*1024)
+#define FSIZE_9XRPRO                   (512*1024)
+#define FSIZE_HORUS                    (2048*1024)
+#define FSIZE_MAX                      FSIZE_HORUS
+
+using namespace Board;
+
+void Boards::setBoardType(const Type & board)
+{
+  if (board >= BOARD_UNKNOWN && board < BOARD_ENUM_COUNT)
+    m_boardType = board;
+  else
+    m_boardType = BOARD_UNKNOWN;
+}
+
+uint32_t Boards::getFourCC(Type board)
+{
+  switch (board) {
+    case BOARD_X12S:
+      return 0x3478746F;
+    case BOARD_X10:
+      return 0x3778746F;
+    case BOARD_TARANIS_XLITE:
+      return 0x3978746F;
+    case BOARD_TARANIS_X7:
+      return 0x3678746F;
+    case BOARD_TARANIS_X9E:
+      return 0x3578746F;
+    case BOARD_TARANIS_X9D:
+    case BOARD_TARANIS_X9DP:
+      return 0x3378746F;
+    case BOARD_SKY9X:
+    case BOARD_AR9X:
+    case BOARD_9XRPRO:
+      return 0x3278746F;
+    case BOARD_MEGA2560:
+    case BOARD_GRUVIN9X:
+      return 0x3178746F;
+    default:
+      return 0;
+  }
+}
+
+const int Boards::getEEpromSize(Board::Type board)
+{
+  switch (board) {
+    case BOARD_STOCK:
+      return EESIZE_STOCK;
+    case BOARD_M128:
+      return EESIZE_M128;
+    case BOARD_MEGA2560:
+    case BOARD_GRUVIN9X:
+      return EESIZE_GRUVIN9X;
+    case BOARD_SKY9X:
+      return EESIZE_SKY9X;
+    case BOARD_9XRPRO:
+    case BOARD_AR9X:
+      return EESIZE_9XRPRO;
+    case BOARD_TARANIS_XLITE:
+    case BOARD_TARANIS_X7:
+    case BOARD_TARANIS_X9D:
+    case BOARD_TARANIS_X9DP:
+    case BOARD_TARANIS_X9E:
+      return EESIZE_TARANIS;
+    case BOARD_UNKNOWN:
+      return EESIZE_MAX;
+    default:
+      return 0; // unlimited
+  }
+}
+
+const int Boards::getFlashSize(Type board)
+{
+  switch (board) {
+    case BOARD_STOCK:
+      return FSIZE_STOCK;
+    case BOARD_M128:
+      return FSIZE_M128;
+    case BOARD_MEGA2560:
+    case BOARD_GRUVIN9X:
+      return FSIZE_GRUVIN9X;
+    case BOARD_SKY9X:
+      return FSIZE_SKY9X;
+    case BOARD_9XRPRO:
+    case BOARD_AR9X:
+      return FSIZE_9XRPRO;
+    case BOARD_TARANIS_XLITE:
+    case BOARD_TARANIS_X7:
+    case BOARD_TARANIS_X9D:
+    case BOARD_TARANIS_X9DP:
+    case BOARD_TARANIS_X9E:
+      return FSIZE_TARANIS;
+    case BOARD_X12S:
+    case BOARD_X10:
+      return FSIZE_HORUS;
+    case BOARD_UNKNOWN:
+      return FSIZE_MAX;
+    default:
+      return 0;
+  }
+}
+
+const SwitchInfo Boards::getSwitchInfo(Board::Type board, int index)
+{
+  if (index < 0)
+    return {SWITCH_NOT_AVAILABLE, CPN_STR_UNKNOWN_ITEM};
+
+  if (IS_TARANIS_XLITE(board)) {
+    const Board::SwitchInfo switches[] = {
+      {SWITCH_3POS,   "SA"},
+      {SWITCH_3POS,   "SB"},
+      {SWITCH_2POS,   "SC"},
+      {SWITCH_2POS,   "SD"}
+    };
+    if (index < DIM(switches))
+      return switches[index];
+  }
+  if (IS_TARANIS_X7(board)) {
+    const Board::SwitchInfo switches[] = {
+      {SWITCH_3POS,   "SA"},
+      {SWITCH_3POS,   "SB"},
+      {SWITCH_3POS,   "SC"},
+      {SWITCH_3POS,   "SD"},
+      {SWITCH_2POS,   "SF"},
+      {SWITCH_TOGGLE, "SH"}
+    };
+    if (index < DIM(switches))
+      return switches[index];
+  }
+  else if (IS_HORUS_OR_TARANIS(board)) {
+    const Board::SwitchInfo switches[] = {
+      {SWITCH_3POS,   "SA"},
+      {SWITCH_3POS,   "SB"},
+      {SWITCH_3POS,   "SC"},
+      {SWITCH_3POS,   "SD"},
+      {SWITCH_3POS,   "SE"},
+      {SWITCH_2POS,   "SF"},
+      {SWITCH_3POS,   "SG"},
+      {SWITCH_TOGGLE, "SH"},
+      {SWITCH_3POS,   "SI"},
+      {SWITCH_3POS,   "SJ"},
+      {SWITCH_3POS,   "SK"},
+      {SWITCH_3POS,   "SL"},
+      {SWITCH_3POS,   "SM"},
+      {SWITCH_3POS,   "SN"},
+      {SWITCH_3POS,   "SO"},
+      {SWITCH_3POS,   "SP"},
+      {SWITCH_3POS,   "SQ"},
+      {SWITCH_3POS,   "SR"}
+    };
+    if (index < DIM(switches))
+      return switches[index];
+  }
+  else {
+    const Board::SwitchInfo switches[] = {
+      {SWITCH_3POS,   "3POS"},
+      {SWITCH_2POS,   "THR"},
+      {SWITCH_2POS,   "RUD"},
+      {SWITCH_2POS,   "ELE"},
+      {SWITCH_2POS,   "AIL"},
+      {SWITCH_2POS,   "GEA"},
+      {SWITCH_TOGGLE, "TRN"}
+    };
+    if (index < DIM(switches))
+      return switches[index];
+  }
+
+  return {SWITCH_NOT_AVAILABLE, CPN_STR_UNKNOWN_ITEM};
+}
+
+const int Boards::getCapability(Board::Type board, Board::Capability capability)
+{
+  switch (capability) {
+    case Sticks:
+      return 4;
+
+    case Pots:
+      if (IS_TARANIS_SMALL(board))
+        return 2;
+      else if (IS_TARANIS_X9E(board))
+        return 4;
+      else
+        return 3;
+
+    case FactoryInstalledPots:
+      if (IS_TARANIS_X9(board))
+        return 2;
+      else
+        return getCapability(board, Pots);
+
+    case Sliders:
+      if (IS_HORUS_X12S(board) || IS_TARANIS_X9E(board))
+        return 4;
+      else if (IS_TARANIS_X9D(board) || IS_HORUS_X10(board))
+        return 2;
+      else
+        return 0;
+
+    case MouseAnalogs:
+      if (IS_HORUS_X12S(board))
+        return 2;
+      else
+        return 0;
+
+    case MaxAnalogs:
+      return getCapability(board, Board::Sticks) + getCapability(board, Board::Pots) + getCapability(board, Board::Sliders) +  getCapability(board, Board::MouseAnalogs);
+
+    case MultiposPots:
+      return IS_HORUS_OR_TARANIS(board) ? 3 : 0;
+
+    case MultiposPotsPositions:
+      return IS_HORUS_OR_TARANIS(board) ? 6 : 0;
+
+    case Switches:
+      if (IS_TARANIS_X9E(board))
+        return 18;
+      else if (IS_TARANIS_X7(board))
+        return 6;
+      else if (IS_TARANIS_XLITE(board))
+        return 4;
+      else if (IS_HORUS_OR_TARANIS(board))
+        return 8;
+      else
+        return 7;
+
+    case FactoryInstalledSwitches:
+      if (IS_TARANIS_X9E(board))
+        return 8;
+      else
+        return getCapability(board, Switches);
+
+    case SwitchPositions:
+      if (IS_HORUS_OR_TARANIS(board))
+        return getCapability(board, Switches) * 3;
+      else
+        return 9;
+
+    case NumTrims:
+      if (IS_HORUS(board))
+        return 6;
+      else
+        return 4;
+
+    case NumTrimSwitches:
+      return getCapability(board, NumTrims) * 2;
+  }
+
+  return 0;
+}
+
+const QString Boards::getAxisName(int index)
+{
+  const QString axes[] = {
+    tr("Left Horizontal"),
+    tr("Left Vertical"),
+    tr("Right Vertical"),
+    tr("Right Horizontal"),
+    tr("Aux. 1"),
+    tr("Aux. 2"),
+  };
+  if (index < (int)DIM(axes))
+    return axes[index];
+  else
+    return tr("Unknown");
+}
+
+const QString Boards::getAnalogInputName(Board::Type board, int index)
+{
+  if (index < 0)
+    return CPN_STR_UNKNOWN_ITEM;
+
+  if (index < getBoardCapability(board, Board::Sticks)) {
+    const QString sticks[] = {
+      tr("Rud"),
+      tr("Ele"),
+      tr("Thr"),
+      tr("Ail")
+    };
+    return sticks[index];
+  }
+
+  index -= getCapability(board, Board::Sticks);
+
+  if (IS_9X(board) || IS_2560(board) || IS_SKY9X(board)) {
+    const QString pots[] = {
+      "P1",
+      "P2",
+      "P3"
+    };
+    if (index < DIM(pots))
+      return pots[index];
+  }
+  else if (IS_TARANIS_X9E(board)) {
+    const QString pots[] = {
+      "F1",
+      "F2",
+      "F3",
+      "F4",
+      "S1",
+      "S2",
+      "LS",
+      "RS"
+    };
+    if (index < DIM(pots))
+      return pots[index];
+  }
+  else if (IS_TARANIS(board)) {
+    const QString pots[] = {
+      "S1",
+      "S2",
+      "S3",
+      "LS",
+      "RS"
+    };
+    if (index < DIM(pots))
+      return pots[index];
+  }
+  else if (IS_HORUS_X12S(board)) {
+    const QString pots[] = {
+      "S1",
+      "6P",
+      "S2",
+      "L1",
+      "L2",
+      "LS",
+      "RS",
+      "JSx",
+      "JSy"
+    };
+    if (index < DIM(pots))
+      return pots[index];
+  }
+  else if (IS_HORUS_X10(board)) {
+    const QString pots[] = {
+      "S1",
+      "6P",
+      "S2",
+      "LS",
+      "RS"
+    };
+    if (index < DIM(pots))
+      return pots[index];
+  }
+
+  return CPN_STR_UNKNOWN_ITEM;
+}
+
+const bool Boards::isBoardCompatible(Type board1, Type board2)
+{
+  return (getFourCC(board1) == getFourCC(board2));
+}
+
+const QString Boards::getBoardName(Board::Type board)
+{
+  switch (board) {
+    case BOARD_STOCK:
+      return "9X";
+    case BOARD_M128:
+      return "9X128";
+    case BOARD_GRUVIN9X:
+      return "Gruvin9x";
+    case BOARD_MEGA2560:
+      return "MEGA2560";
+    case BOARD_TARANIS_X7:
+      return "Taranis X7/X7S";
+     case BOARD_TARANIS_XLITE:
+      return "Taranis X-Lite";
+    case BOARD_TARANIS_X9D:
+      return "Taranis X9D";
+    case BOARD_TARANIS_X9DP:
+      return "Taranis X9D+";
+    case BOARD_TARANIS_X9E:
+      return "Taranis X9E";
+    case BOARD_SKY9X:
+      return "Sky9x";
+    case BOARD_9XRPRO:
+      return "9XR-PRO";
+    case BOARD_AR9X:
+      return "AR9X";
+    case BOARD_X12S:
+      return "Horus X12S";
+    case BOARD_X10:
+      return "Horus X10/X10S";
+    default:
+      return tr("Unknown");
+  }
+}

companion/src/firmwares/boards.h

@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BOARDS_H_
+#define _BOARDS_H_
+
+#include <QtCore>
+#include <QObject>
+#include <QString>
+
+// TODO create a Board class with all these functions
+
+namespace Board {
+
+  enum Type
+  {
+    BOARD_UNKNOWN = -1,
+    BOARD_STOCK = 0,
+    BOARD_M128,
+    BOARD_MEGA2560,
+    BOARD_GRUVIN9X,
+    BOARD_SKY9X,
+    BOARD_9XRPRO,
+    BOARD_AR9X,
+    BOARD_TARANIS_X7,
+    BOARD_TARANIS_X9D,
+    BOARD_TARANIS_X9DP,
+    BOARD_TARANIS_X9E,
+    BOARD_X12S,
+    BOARD_X10,
+    BOARD_TARANIS_XLITE,
+    BOARD_ENUM_COUNT
+  };
+
+  enum PotType
+  {
+    POT_NONE,
+    POT_WITH_DETENT,
+    POT_MULTIPOS_SWITCH,
+    POT_WITHOUT_DETENT
+  };
+
+  enum SliderType
+  {
+    SLIDER_NONE,
+    SLIDER_WITH_DETENT
+  };
+
+  enum SwitchType
+  {
+    SWITCH_NOT_AVAILABLE,
+    SWITCH_TOGGLE,
+    SWITCH_2POS,
+    SWITCH_3POS
+  };
+
+  enum StickAxes {
+    STICK_AXIS_LH = 0,
+    STICK_AXIS_LV,
+    STICK_AXIS_RV,
+    STICK_AXIS_RH,
+    STICK_AXIS_COUNT
+  };
+
+  enum TrimAxes {
+    TRIM_AXIS_LH = 0,
+    TRIM_AXIS_LV,
+    TRIM_AXIS_RV,
+    TRIM_AXIS_RH,
+    TRIM_AXIS_T5,
+    TRIM_AXIS_T6,
+    TRIM_AXIS_COUNT
+  };
+
+  enum TrimSwitches
+  {
+    TRIM_SW_LH_DEC,
+    TRIM_SW_LH_INC,
+    TRIM_SW_LV_DEC,
+    TRIM_SW_LV_INC,
+    TRIM_SW_RV_DEC,
+    TRIM_SW_RV_INC,
+    TRIM_SW_RH_DEC,
+    TRIM_SW_RH_INC,
+    TRIM_SW_T5_DEC,
+    TRIM_SW_T5_INC,
+    TRIM_SW_T6_DEC,
+    TRIM_SW_T6_INC,
+    TRIM_SW_COUNT
+  };
+
+  enum Capability {
+    Sticks,
+    Pots,
+    FactoryInstalledPots,
+    Sliders,
+    MouseAnalogs,
+    MaxAnalogs,
+    MultiposPots,
+    MultiposPotsPositions,
+    Switches,
+    SwitchPositions,
+    FactoryInstalledSwitches,
+    NumTrims,
+    NumTrimSwitches
+  };
+
+  struct SwitchInfo
+  {
+    SwitchType config;
+    QString name;
+  };
+
+  struct SwitchPosition {
+    SwitchPosition(unsigned int index, unsigned int position):
+      index(index),
+      position(position)
+      {
+      }
+      unsigned int index;
+      unsigned int position;
+  };
+
+}
+
+class Boards
+{
+  Q_DECLARE_TR_FUNCTIONS(Boards)
+
+  public:
+
+    Boards(Board::Type board)
+    {
+      setBoardType(board);
+    }
+
+    void setBoardType(const Board::Type & board);
+    Board::Type getBoardType() const { return m_boardType; }
+
+    const uint32_t getFourCC() const { return getFourCC(m_boardType); }
+    const int getEEpromSize() const { return getEEpromSize(m_boardType); }
+    const int getFlashSize() const { return getFlashSize(m_boardType); }
+    const Board::SwitchInfo getSwitchInfo(int index) const { return getSwitchInfo(m_boardType, index); }
+    const int getCapability(Board::Capability capability) const { return getCapability(m_boardType, capability); }
+    const QString getAnalogInputName(int index) const { return getAnalogInputName(m_boardType, index); }
+    const bool isBoardCompatible(Board::Type board2) const { return isBoardCompatible(m_boardType, board2); }
+
+    static uint32_t getFourCC(Board::Type board);
+    static const int getEEpromSize(Board::Type board);
+    static const int getFlashSize(Board::Type board);
+    static const Board::SwitchInfo getSwitchInfo(Board::Type board, int index);
+    static const int getCapability(Board::Type board, Board::Capability capability);
+    static const QString getAxisName(int index);
+    static const QString getAnalogInputName(Board::Type board, int index);
+    static const bool isBoardCompatible(Board::Type board1, Board::Type board2);
+    static const QString getBoardName(Board::Type board);
+
+  protected:
+
+    Board::Type m_boardType;
+};
+
+// temporary aliases for transition period, use Boards class instead.
+#define getBoardCapability(b__, c__)   Boards::getCapability(b__, c__)
+
+#define IS_9X(board)                   (board==Board::BOARD_STOCK || board==Board::BOARD_M128)
+#define IS_STOCK(board)                (board==Board::BOARD_STOCK)
+#define IS_M128(board)                 (board==Board::BOARD_M128)
+#define IS_2560(board)                 (board==Board::BOARD_GRUVIN9X || board==Board::BOARD_MEGA2560)
+#define IS_SKY9X(board)                (board==Board::BOARD_SKY9X || board==Board::BOARD_9XRPRO || board==Board::BOARD_AR9X)
+#define IS_9XRPRO(board)               (board==Board::BOARD_9XRPRO)
+#define IS_TARANIS_XLITE(board)        (board==Board::BOARD_TARANIS_XLITE)
+#define IS_TARANIS_X7(board)           (board==Board::BOARD_TARANIS_X7)
+#define IS_TARANIS_X9(board)           (board==Board::BOARD_TARANIS_X9D || board==Board::BOARD_TARANIS_X9DP || board==Board::BOARD_TARANIS_X9E)
+#define IS_TARANIS_X9D(board)          (board==Board::BOARD_TARANIS_X9D || board==Board::BOARD_TARANIS_X9DP)
+#define IS_TARANIS_PLUS(board)         (board==Board::BOARD_TARANIS_X9DP || board==Board::BOARD_TARANIS_X9E)
+#define IS_TARANIS_X9E(board)          (board==Board::BOARD_TARANIS_X9E)
+#define IS_TARANIS(board)              (IS_TARANIS_X9(board) || IS_TARANIS_X7(board) || IS_TARANIS_XLITE(board))
+#define IS_TARANIS_SMALL(board)        (board==Board::BOARD_TARANIS_X7 || board==Board::BOARD_TARANIS_XLITE)
+#define IS_TARANIS_NOT_X9E(board)      (IS_TARANIS(board) && !IS_TARANIS_X9E(board))
+#define IS_HORUS_X12S(board)           (board==Board::BOARD_X12S)
+#define IS_HORUS_X10(board)            (board==Board::BOARD_X10)
+#define IS_HORUS(board)                (IS_HORUS_X12S(board) || IS_HORUS_X10(board))
+#define IS_HORUS_OR_TARANIS(board)     (IS_HORUS(board) || IS_TARANIS(board))
+#define IS_STM32(board)                (IS_TARANIS(board) || IS_HORUS(board))
+#define IS_ARM(board)                  (IS_STM32(board) || IS_SKY9X(board))
+#define HAS_LARGE_LCD(board)           (IS_HORUS(board) || IS_TARANIS_X9(board))
+
+#endif // _BOARDS_H_

companion/src/firmwares/curvereference.cpp

@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "curvereference.h"
+
+#include "helpers.h"     // for Helpers::getAdjustmentString()
+#include "radiodata.h"  // for ModelData
+
+QString CurveReference::toString(const ModelData * model, bool verbose) const
+{
+  if (value == 0) {
+    return "----";
+  }
+
+  QString ret;
+  unsigned idx = abs(value) - 1;
+
+  switch(type) {
+    case CURVE_REF_DIFF:
+      ret = tr("Diff(%1)").arg(Helpers::getAdjustmentString(value, model));
+      break;
+
+    case CURVE_REF_EXPO:
+      ret = tr("Expo(%1)").arg(Helpers::getAdjustmentString(value, model));
+      break;
+
+    case CURVE_REF_FUNC:
+      ret = QString("x>0" "x<0" "|x|" "f>0" "f<0" "|f|").mid(3*(value-1), 3);
+      if (verbose)
+        ret = tr("Function(%1)").arg(ret);
+      break;
+
+    default:
+      if (model)
+        ret = model->curves[idx].nameToString(idx);
+      else
+        ret = CurveData().nameToString(idx);
+      if (verbose)
+        ret = tr("Curve(%1)").arg(ret);
+      if (value < 0)
+        ret.prepend(CPN_STR_SW_INDICATOR_REV);
+      break;
+  }
+
+  return ret;
+}

companion/src/firmwares/curvereference.h

@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef CURVEREFERENCE_H
+#define CURVEREFERENCE_H
+
+#include <QtCore>
+
+class ModelData;
+
+class CurveReference {
+  Q_DECLARE_TR_FUNCTIONS(CurveReference)
+
+  public:
+    enum CurveRefType {
+      CURVE_REF_DIFF,
+      CURVE_REF_EXPO,
+      CURVE_REF_FUNC,
+      CURVE_REF_CUSTOM
+    };
+
+    CurveReference() { clear(); }
+
+    CurveReference(CurveRefType type, int value):
+      type(type),
+      value(value)
+    {
+    }
+
+    void clear() { memset(this, 0, sizeof(CurveReference)); }
+
+    CurveRefType type;
+    int value;
+
+    QString toString(const ModelData * model = NULL, bool verbose = true) const;
+};
+
+#endif // CURVEREFERENCE_H

companion/src/firmwares/customfunctiondata.cpp

@@ -0,0 +1,264 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "customfunctiondata.h"
+
+#include "eeprominterface.h"
+#include "radiodata.h"
+#include "radiodataconversionstate.h"
+
+void CustomFunctionData::clear()
+{
+  memset(reinterpret_cast<void *>(this), 0, sizeof(CustomFunctionData));
+  if (!getCurrentFirmware()->getCapability(SafetyChannelCustomFunction)) {
+    func = FuncTrainer;
+  }
+}
+
+bool CustomFunctionData::isEmpty() const
+{
+  return (swtch.type == SWITCH_TYPE_NONE);
+}
+
+QString CustomFunctionData::nameToString(int index, bool globalContext) const
+{
+  return RadioData::getElementName((globalContext ? tr("GF") : tr("SF")), index+1, 0, true);
+}
+
+QString CustomFunctionData::funcToString(const ModelData * model) const
+{
+  if (func >= FuncOverrideCH1 && func <= FuncOverrideCH32)
+    return tr("Override %1").arg(RawSource(SOURCE_TYPE_CH, func).toString(model));
+  else if (func == FuncTrainer)
+    return tr("Trainer");
+  else if (func == FuncTrainerRUD)
+    return tr("Trainer RUD");
+  else if (func == FuncTrainerELE)
+    return tr("Trainer ELE");
+  else if (func == FuncTrainerTHR)
+    return tr("Trainer THR");
+  else if (func == FuncTrainerAIL)
+    return tr("Trainer AIL");
+  else if (func == FuncInstantTrim)
+    return tr("Instant Trim");
+  else if (func == FuncPlaySound)
+    return tr("Play Sound");
+  else if (func == FuncPlayHaptic)
+    return tr("Haptic");
+  else if (func == FuncReset)
+    return tr("Reset");
+  else if (func >= FuncSetTimer1 && func <= FuncSetTimer3)
+    return tr("Set Timer %1").arg(func-FuncSetTimer1+1);
+  else if (func == FuncVario)
+    return tr("Vario");
+  else if (func == FuncPlayPrompt)
+    return tr("Play Track");
+  else if (func == FuncPlayBoth)
+    return tr("Play Both");
+  else if (func == FuncPlayValue)
+    return tr("Play Value");
+  else if (func == FuncPlayScript)
+    return tr("Play Script");
+  else if (func == FuncLogs)
+    return tr("SD Logs");
+  else if (func == FuncVolume)
+    return tr("Volume");
+  else if (func == FuncBacklight)
+    return tr("Backlight");
+  else if (func == FuncScreenshot)
+    return tr("Screenshot");
+  else if (func == FuncBackgroundMusic)
+    return tr("Background Music");
+  else if (func == FuncBackgroundMusicPause)
+    return tr("Background Music Pause");
+  else if (func >= FuncAdjustGV1 && func <= FuncAdjustGVLast)
+    return tr("Adjust %1").arg(RawSource(SOURCE_TYPE_GVAR, func-FuncAdjustGV1).toString(model));
+  else if (func == FuncSetFailsafeInternalModule)
+    return tr("SetFailsafe Int. Module");
+  else if (func == FuncSetFailsafeExternalModule)
+    return tr("SetFailsafe Ext. Module");
+  else if (func == FuncRangeCheckInternalModule)
+    return tr("RangeCheck Int. Module");
+  else if (func == FuncRangeCheckExternalModule)
+    return tr("RangeCheck Ext. Module");
+  else if (func == FuncBindInternalModule)
+    return tr("Bind Int. Module");
+  else if (func == FuncBindExternalModule)
+    return tr("Bind Ext. Module");
+  else {
+    return QString("???"); // Highlight unknown functions with output of question marks.(BTW should not happen that we do not know what a function is)
+  }
+}
+
+void CustomFunctionData::populateResetParams(const ModelData * model, QComboBox * b, unsigned int value = 0)
+{
+  int val = 0;
+  Firmware * firmware = Firmware::getCurrentVariant();
+  Board::Type board = firmware->getBoard();
+
+  b->addItem(tr("Timer1"), val++);
+  b->addItem(tr("Timer2"), val++);
+  if (IS_ARM(board)) {
+    b->addItem( tr("Timer3"), val++);
+  }
+  b->addItem(tr("Flight"), val++);
+  b->addItem(tr("Telemetry"), val++);
+  int reCount = firmware->getCapability(RotaryEncoders);
+  if (reCount == 1) {
+    b->addItem(tr("Rotary Encoder"), val++);
+  }
+  else if (reCount == 2) {
+    b->addItem(tr("REa"), val++);
+    b->addItem(tr("REb"), val++);
+  }
+  if ((int)value < b->count()) {
+    b->setCurrentIndex(value);
+  }
+  if (model && IS_ARM(board)) {
+    for (int i=0; i<CPN_MAX_SENSORS; ++i) {
+      if (model->sensorData[i].isAvailable()) {
+        RawSource item = RawSource(SOURCE_TYPE_TELEMETRY, 3*i);
+        b->addItem(item.toString(model), val+i);
+        if ((int)value == val+i) {
+          b->setCurrentIndex(b->count()-1);
+        }
+      }
+    }
+  }
+}
+
+void CustomFunctionData::populatePlaySoundParams(QStringList & qs)
+{
+  qs <<"Beep 1" << "Beep 2" << "Beep 3" << "Warn1" << "Warn2" << "Cheep" << "Ratata" << "Tick" << "Siren" << "Ring" ;
+  qs << "SciFi" << "Robot" << "Chirp" << "Tada" << "Crickt"  << "AlmClk"  ;
+}
+
+void CustomFunctionData::populateHapticParams(QStringList & qs)
+{
+  qs << "0" << "1" << "2" << "3";
+}
+
+QString CustomFunctionData::paramToString(const ModelData * model) const
+{
+  QStringList qs;
+  if (func <= FuncInstantTrim) {
+    return QString("%1").arg(param);
+  }
+  else if (func == FuncLogs) {
+    return QString("%1").arg(param/10.0) + tr("s");
+  }
+  else if (func == FuncPlaySound) {
+    CustomFunctionData::populatePlaySoundParams(qs);
+    if (param>=0 && param<(int)qs.count())
+      return qs.at(param);
+    else
+      return tr("<font color=red><b>Inconsistent parameter</b></font>");
+  }
+  else if (func == FuncPlayHaptic) {
+    CustomFunctionData::populateHapticParams(qs);
+    if (param>=0 && param<(int)qs.count())
+      return qs.at(param);
+    else
+      return tr("<font color=red><b>Inconsistent parameter</b></font>");
+  }
+  else if (func == FuncReset) {
+    QComboBox cb;
+    CustomFunctionData::populateResetParams(model, &cb);
+    int pos = cb.findData(param);
+    if (pos >= 0)
+      return cb.itemText(pos);
+    else
+      return tr("<font color=red><b>Inconsistent parameter</b></font>");
+  }
+  else if (func == FuncVolume || func == FuncPlayValue || func == FuncBacklight) {
+    RawSource item(param);
+    return item.toString(model);
+  }
+  else if (func == FuncPlayPrompt || func == FuncPlayBoth) {
+    if ( getCurrentFirmware()->getCapability(VoicesAsNumbers)) {
+      return QString("%1").arg(param);
+    }
+    else {
+      return paramarm;
+    }
+  }
+  else if (func >= FuncAdjustGV1 && func < FuncCount) {
+    switch (adjustMode) {
+      case FUNC_ADJUST_GVAR_CONSTANT:
+        return tr("Value ")+QString("%1").arg(param);
+      case FUNC_ADJUST_GVAR_SOURCE:
+      case FUNC_ADJUST_GVAR_GVAR:
+        return RawSource(param).toString();
+      case FUNC_ADJUST_GVAR_INCDEC:
+        float val;
+        QString unit;
+        if (IS_ARM(getCurrentBoard())) {
+          val = param * model->gvarData[func - FuncAdjustGV1].multiplierGet();
+          unit = model->gvarData[func - FuncAdjustGV1].unitToString();
+        }
+        else {
+          val = param;
+          unit = "";
+        }
+        return QString("Increment: %1%2").arg(val).arg(unit);
+    }
+  }
+  return "";
+}
+
+QString CustomFunctionData::repeatToString() const
+{
+  if (repeatParam == -1) {
+    return tr("played once, not during startup");
+  }
+  else if (repeatParam == 0) {
+    return "";
+  }
+  else {
+    unsigned int step = IS_ARM(getCurrentBoard()) ? 1 : 10;
+    return tr("repeat(%1s)").arg(step*repeatParam);
+  }
+}
+
+QString CustomFunctionData::enabledToString() const
+{
+  if ((func >= FuncOverrideCH1 && func <= FuncOverrideCH32) ||
+      (func >= FuncAdjustGV1 && func <= FuncAdjustGVLast) ||
+      (func == FuncReset) ||
+      (func >= FuncSetTimer1 && func <= FuncSetTimer2) ||
+      (func == FuncVolume) ||
+      (func == FuncBacklight) ||
+      (func <= FuncInstantTrim)) {
+    if (!enabled) {
+      return tr("DISABLED");
+    }
+  }
+  return "";
+}
+
+void CustomFunctionData::convert(RadioDataConversionState & cstate)
+{
+  cstate.setComponent(tr("CFN"), 8);
+  cstate.setSubComp(nameToString(cstate.subCompIdx, (cstate.toModel() ? false : true)));
+  swtch.convert(cstate);
+  if (func == FuncVolume || func == FuncBacklight || func == FuncPlayValue || (func >= FuncAdjustGV1 && func <= FuncAdjustGVLast && adjustMode == 1)) {
+    param = RawSource(param).convert(cstate.withComponentField("PARAM")).toValue();
+  }
+}

companion/src/firmwares/customfunctiondata.h

@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef CUSTOMFUNCTIONDATA_H
+#define CUSTOMFUNCTIONDATA_H
+
+#include "boards.h"
+#include "constants.h"
+#include "rawswitch.h"
+
+#include <QtCore>
+#include <QComboBox>
+
+class Firmware;
+class ModelData;
+class GeneralSettings;
+class RadioDataConversionState;
+
+enum AssignFunc {
+  FuncOverrideCH1 = 0,
+  FuncOverrideCH32 = FuncOverrideCH1+CPN_MAX_CHNOUT-1,
+  FuncTrainer,
+  FuncTrainerRUD,
+  FuncTrainerELE,
+  FuncTrainerTHR,
+  FuncTrainerAIL,
+  FuncInstantTrim,
+  FuncPlaySound,
+  FuncPlayHaptic,
+  FuncReset,
+  FuncSetTimer1,
+  FuncSetTimer2,
+  FuncSetTimer3,
+  FuncVario,
+  FuncPlayPrompt,
+  FuncPlayBoth,
+  FuncPlayValue,
+  FuncPlayScript,
+  FuncLogs,
+  FuncVolume,
+  FuncBacklight,
+  FuncScreenshot,
+  FuncBackgroundMusic,
+  FuncBackgroundMusicPause,
+  FuncAdjustGV1,
+  FuncAdjustGVLast = FuncAdjustGV1+CPN_MAX_GVARS-1,
+  FuncSetFailsafeInternalModule,
+  FuncSetFailsafeExternalModule,
+  FuncRangeCheckInternalModule,
+  FuncRangeCheckExternalModule,
+  FuncBindInternalModule,
+  FuncBindExternalModule,
+  FuncCount,
+  FuncReserve = -1
+};
+
+enum GVarAdjustModes
+{
+  FUNC_ADJUST_GVAR_CONSTANT,
+  FUNC_ADJUST_GVAR_SOURCE,
+  FUNC_ADJUST_GVAR_GVAR,
+  FUNC_ADJUST_GVAR_INCDEC
+};
+
+class CustomFunctionData {
+  Q_DECLARE_TR_FUNCTIONS(CustomFunctionData)
+
+  public:
+    CustomFunctionData(AssignFunc func=FuncOverrideCH1) { clear(); this->func = func; }
+    RawSwitch    swtch;
+    AssignFunc   func;
+    int param;
+    char paramarm[10];
+    unsigned int enabled; // TODO perhaps not any more the right name
+    unsigned int adjustMode;
+    int repeatParam;
+
+    void clear();
+    bool isEmpty() const;
+    QString nameToString(int index, bool globalContext = false) const;
+    QString funcToString(const ModelData * model = NULL) const;
+    QString paramToString(const ModelData * model) const;
+    QString repeatToString() const;
+    QString enabledToString() const;
+
+    static void populateResetParams(const ModelData * model, QComboBox * b, unsigned int value);
+    static void populatePlaySoundParams(QStringList & qs);
+    static void populateHapticParams(QStringList & qs);
+
+    void convert(RadioDataConversionState & cstate);
+
+};
+
+
+#endif // CUSTOMFUNCTIONDATA_H

companion/src/firmwares/eeprominterface.cpp

@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "eeprominterface.h"
+#include "firmwares/opentx/opentxeeprom.h"
+#include "firmwareinterface.h"
+
+#include <QtCore>
+#include <QMessageBox>
+#include <bitset>
+
+float ValToTim(int value)
+{
+   return ((value < -109 ? 129+value : (value < 7 ? (113+value)*5 : (53+value)*10))/10.0);
+}
+
+int TimToVal(float value)
+{
+  int temp;
+  if (value>60) {
+    temp=136+round((value-60));
+  }
+  else if (value>2) {
+    temp=20+round((value-2.0)*2.0);
+  }
+  else {
+    temp=round(value*10.0);
+  }
+  return (temp-129);
+}
+
+
+/*
+ * EEpromInterface globals
+ */
+
+// TODO: No globals
+
+QList<EEPROMInterface *> eepromInterfaces;
+
+void unregisterEEpromInterfaces()
+{
+  foreach(EEPROMInterface * intf, eepromInterfaces) {
+    // qDebug() << "UnregisterEepromInterfaces(): deleting " <<  QString::number( reinterpret_cast<uint64_t>(intf), 16 );
+    delete intf;
+  }
+  OpenTxEepromCleanup();
+}
+
+#if 0  // TODO: remove if unused, currently commented out in mdiChild.cpp
+// TODO: No GUI here, e.g. return string list instead
+void EEPROMInterface::showEepromErrors(QWidget *parent, const QString &title, const QString &mainMessage, unsigned long errorsFound)
+{
+  std::bitset<NUM_ERRORS> errors((unsigned long long)errorsFound);
+  QStringList errorsList;
+
+  errorsList << tr("Possible causes for this:");
+
+  if (errors.test(UNSUPPORTED_NEWER_VERSION)) { errorsList << tr("- Eeprom is from a newer version of OpenTX"); }
+  if (errors.test(NOT_OPENTX)) { errorsList << tr("- Eeprom is not from OpenTX"); }
+  if (errors.test(NOT_TH9X)) { errorsList << tr("- Eeprom is not from Th9X"); }
+  if (errors.test(NOT_GRUVIN9X)) { errorsList << tr("- Eeprom is not from Gruvin9X"); }
+  if (errors.test(NOT_ERSKY9X)) { errorsList << tr("- Eeprom is not from ErSky9X"); }
+  if (errors.test(NOT_ER9X)) { errorsList << tr("- Eeprom is not from Er9X"); }
+  if (errors.test(WRONG_SIZE)) { errorsList << tr("- Eeprom size is invalid"); }
+  if (errors.test(WRONG_FILE_SYSTEM)) { errorsList << tr("- Eeprom file system is invalid"); }
+  if (errors.test(UNKNOWN_BOARD)) { errorsList << tr("- Eeprom is from a unknown board"); }
+  if (errors.test(WRONG_BOARD)) { errorsList << tr("- Eeprom is from the wrong board"); }
+  if (errors.test(BACKUP_NOT_SUPPORTED)) { errorsList << tr("- Eeprom backup not supported"); }
+
+  if (errors.test(UNKNOWN_ERROR)) { errorsList << tr("- Something that couldn't be guessed, sorry"); }
+
+  if (errors.test(HAS_WARNINGS)) {
+    errorsList << tr("Warning:");
+    if (errors.test(WARNING_WRONG_FIRMWARE)) { errorsList << tr("- Your radio probably uses a wrong firmware,\n eeprom size is 4096 but only the first 2048 are used"); }
+  }
+
+  QMessageBox msgBox(parent);
+  msgBox.setWindowTitle(title);
+  msgBox.setIcon(QMessageBox::Critical);
+  msgBox.setText(mainMessage);
+  msgBox.setInformativeText(errorsList.join("\n"));
+  msgBox.setStandardButtons(QMessageBox::Ok);
+  msgBox.exec();
+}
+#endif
+
+// TODO: No GUI here, e.g. return string list instead
+void EEPROMInterface::showEepromWarnings(QWidget *parent, const QString &title, unsigned long errorsFound)
+{
+  std::bitset<NUM_ERRORS> errors((unsigned long long)errorsFound);
+  QStringList warningsList;
+  if (errors.test(WARNING_WRONG_FIRMWARE)) { warningsList << tr("- Your radio probably uses a wrong firmware,\n eeprom size is 4096 but only the first 2048 are used"); }
+  if (errors.test(OLD_VERSION)) { warningsList << tr("- Your eeprom is from an old version of OpenTX, upgrading!\n To keep your original file as a backup, please choose File -> Save As specifying a different name."); }
+
+  QMessageBox msgBox(parent);
+  msgBox.setWindowTitle(title);
+  msgBox.setIcon(QMessageBox::Warning);
+  msgBox.setText(tr("Warnings!"));
+  msgBox.setInformativeText(warningsList.join("\n"));
+  msgBox.setStandardButtons(QMessageBox::Ok);
+  msgBox.exec();
+}
+
+
+/*
+ * Firmware
+ */
+
+// static
+QVector<Firmware *> Firmware::registeredFirmwares;
+Firmware * Firmware::defaultVariant = NULL;
+Firmware * Firmware::currentVariant = NULL;
+
+// static
+Firmware * Firmware::getFirmwareForId(const QString & id)
+{
+  foreach(Firmware * firmware, registeredFirmwares) {
+    Firmware * result = firmware->getFirmwareVariant(id);
+    if (result) {
+      return result;
+    }
+  }
+
+  return defaultVariant;
+}
+
+unsigned int Firmware::getVariantNumber()
+{
+  unsigned int result = 0;
+  const Firmware * base = getFirmwareBase();
+  QStringList options = id.mid(base->getId().length()+1).split("-", QString::SkipEmptyParts);
+  foreach(QString option, options) {
+    foreach(OptionsGroup group, base->opts) {
+      foreach(Option opt, group) {
+        if (opt.name == option) {
+          result += opt.variant;
+        }
+      }
+    }
+  }
+  return result;
+}
+
+void Firmware::addLanguage(const char * lang)
+{
+  languages.push_back(lang);
+}
+
+//void Firmware::addTTSLanguage(const char * lang)
+//{
+//  ttslanguages.push_back(lang);
+//}
+
+void Firmware::addOption(const char * option, const QString & tooltip, unsigned variant)
+{
+  addOption(Option(option, tooltip, variant));
+}
+
+void Firmware::addOption(const Option & option)
+{
+  addOptionsGroup({option});
+}
+
+void Firmware::addOptionsGroup(const OptionsGroup & options)
+{
+  this->opts.append(options);
+}

companion/src/firmwares/eeprominterface.h

@@ -0,0 +1,424 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _EEPROMINTERFACE_H_
+#define _EEPROMINTERFACE_H_
+
+#include "boards.h"
+#include "macros.h"
+#include "radiodata.h"
+#include "../../radio/src/definitions.h"
+#include "simulatorinterface.h"
+
+#include <QtCore>
+#include <QStringList>
+#include <QList>
+#include <QDebug>
+
+#include <iostream>
+
+const uint8_t modn12x3[4][4]= {
+  {1, 2, 3, 4},
+  {1, 3, 2, 4},
+  {4, 2, 3, 1},
+  {4, 3, 2, 1} };
+
+enum Capability {
+  Models,
+  ModelName,
+  FlightModes,
+  FlightModesName,
+  FlightModesHaveFades,
+  Imperial,
+  Mixes,
+  Timers,
+  TimersName,
+  VoicesAsNumbers,
+  VoicesMaxLength,
+  MultiLangVoice,
+  ModelImage,
+  CustomFunctions,
+  SafetyChannelCustomFunction,
+  LogicalSwitches,
+  CustomAndSwitches,
+  HasNegAndSwitches,
+  LogicalSwitchesExt,
+  RotaryEncoders,
+  Outputs,
+  ChannelsName,
+  ExtraInputs,
+  TrimsRange,
+  ExtendedTrimsRange,
+  NumCurves,
+  NumCurvePoints,
+  OffsetWeight,
+  Simulation,
+  SoundMod,
+  SoundPitch,
+  MaxVolume,
+  MaxContrast,
+  MinContrast,
+  Haptic,
+  HasBeeper,
+  ModelTrainerEnable,
+  HasExpoNames,
+  HasNoExpo,
+  HasMixerNames,
+  HasCvNames,
+  HasPxxCountry,
+  HasPPMStart,
+  HasGeneralUnits,
+  HasFAIMode,
+  OptrexDisplay,
+  PPMExtCtrl,
+  PPMFrameLength,
+  Telemetry,
+  TelemetryUnits,
+  TelemetryBars,
+  Heli,
+  Gvars,
+  GvarsInCS,
+  GvarsAreNamed,
+  GvarsFlightModes,
+  GvarsName,
+  NoTelemetryProtocol,
+  TelemetryCustomScreens,
+  TelemetryCustomScreensFieldsPerLine,
+  TelemetryMaxMultiplier,
+  HasVario,
+  HasVarioSink,
+  HasFailsafe,
+  HasSoundMixer,
+  NumModules,
+  HasModuleR9MFlex,
+  HasModuleR9MMini,
+  PPMCenter,
+  PPMUnitMicroseconds,
+  SYMLimits,
+  HastxCurrentCalibration,
+  HasVolume,
+  HasBrightness,
+  PerModelTimers,
+  SlowScale,
+  SlowRange,
+  PermTimers,
+  HasSDLogs,
+  CSFunc,
+  LcdWidth,
+  LcdHeight,
+  LcdDepth,
+  GetThrSwitch,
+  HasDisplayText,
+  HasTopLcd,
+  GlobalFunctions,
+  VirtualInputs,
+  InputsLength,
+  TrainerInputs,
+  RtcTime,
+  SportTelemetry,
+  LuaScripts,
+  LuaInputsPerScript,
+  LuaOutputsPerScript,
+  LimitsPer1000,
+  EnhancedCurves,
+  HasFasOffset,
+  HasMahPersistent,
+  SimulatorVariant,
+  MavlinkTelemetry,
+  HasInputDiff,
+  HasMixerExpo,
+  HasBatMeterRange,
+  DangerousFunctions,
+  HasModelCategories
+};
+
+class EEPROMInterface
+{
+  Q_DECLARE_TR_FUNCTIONS(EEPROMInterface)
+
+  public:
+
+    EEPROMInterface(Board::Type board):
+      board(board)
+    {
+    }
+
+    virtual ~EEPROMInterface() {}
+
+    inline Board::Type getBoard() { return board; }
+
+    virtual unsigned long load(RadioData &radioData, const uint8_t * eeprom, int size) = 0;
+
+    virtual unsigned long loadBackup(RadioData & radioData, const uint8_t * eeprom, int esize, int index) = 0;
+
+    virtual int save(uint8_t * eeprom, const RadioData & radioData, uint8_t version=0, uint32_t variant=0) = 0;
+
+    virtual int getSize(const ModelData &) = 0;
+
+    virtual int getSize(const GeneralSettings &) = 0;
+
+    //static void showEepromErrors(QWidget *parent, const QString &title, const QString &mainMessage, unsigned long errorsFound);
+    static void showEepromWarnings(QWidget *parent, const QString &title, unsigned long errorsFound);
+
+  protected:
+
+    Board::Type board;
+
+  private:
+
+    EEPROMInterface();
+
+};
+
+/* EEPROM string conversion function (used only by er9xeeprom and ersky9xeeprom) */
+inline void getEEPROMString(char *dst, const char *src, int size)
+{
+  memcpy(dst, src, size);
+  dst[size] = '\0';
+  for (int i=size-1; i>=0; i--) {
+    if (dst[i] == ' ')
+      dst[i] = '\0';
+    else
+      break;
+  }
+}
+
+// (used only by er9xeeprom and ersky9xeeprom)
+inline int applyStickMode(int stick, unsigned int mode)
+{
+  if (mode == 0 || mode > 4) {
+    std::cerr << "Incorrect stick mode" << mode;
+    return stick;
+  }
+
+  if (stick >= 1 && stick <= 4)
+    return modn12x3[mode-1][stick-1];
+  else
+    return stick;
+}
+
+float ValToTim(int value);
+int TimToVal(float value);
+
+void registerEEpromInterfaces();
+void unregisterEEpromInterfaces();
+void registerOpenTxFirmwares();
+void unregisterOpenTxFirmwares();
+
+enum EepromLoadErrors {
+  ALL_OK,
+  UNKNOWN_ERROR,
+  UNSUPPORTED_NEWER_VERSION,
+  WRONG_SIZE,
+  WRONG_FILE_SYSTEM,
+  NOT_OPENTX,
+  NOT_TH9X,
+  NOT_GRUVIN9X,
+  NOT_ERSKY9X,
+  NOT_ER9X,
+  UNKNOWN_BOARD,
+  WRONG_BOARD,
+  BACKUP_NOT_SUPPORTED,
+
+  HAS_WARNINGS,
+  OLD_VERSION,
+  WARNING_WRONG_FIRMWARE,
+
+  NUM_ERRORS
+};
+
+class Firmware
+{
+  Q_DECLARE_TR_FUNCTIONS(Firmware)
+
+  public:
+    struct Option {
+      const char * name = nullptr;
+      QString tooltip;
+      unsigned variant = 0;
+
+      explicit Option(const char * name, const QString & description, unsigned variant = 0) :
+        name(name), tooltip(description), variant(variant) { }
+    };
+    typedef QList<Option> OptionsGroup;
+    typedef QList<OptionsGroup> OptionsList;
+
+
+    explicit Firmware(const QString & id, const QString & name, Board::Type board) :
+      Firmware(nullptr, id, name, board)
+    { }
+
+    explicit Firmware(Firmware * base, const QString & id, const QString & name, Board::Type board) :
+      id(id),
+      name(name),
+      board(board),
+      variantBase(0),
+      base(base),
+      eepromInterface(nullptr)
+    { }
+
+    virtual ~Firmware() { }
+
+    inline const Firmware * getFirmwareBase() const
+    {
+      return base ? base : this;
+    }
+
+    virtual Firmware * getFirmwareVariant(const QString & id) { return NULL; }
+
+    unsigned int getVariantNumber();
+
+    virtual void addLanguage(const char * lang);
+
+    //virtual void addTTSLanguage(const char * lang);
+
+    virtual void addOption(const char * option, const QString & tooltip = QString(), unsigned variant = 0);
+
+    virtual void addOption(const Option & option);
+
+    virtual void addOptionsGroup(const OptionsGroup & options);
+
+    virtual QString getStampUrl() = 0;
+
+    virtual QString getReleaseNotesUrl() = 0;
+
+    virtual QString getFirmwareUrl() = 0;
+
+    Board::Type getBoard() const
+    {
+      return board;
+    }
+
+    void setEEpromInterface(EEPROMInterface * eeprom)
+    {
+      eepromInterface = eeprom;
+    }
+
+    EEPROMInterface * getEEpromInterface()
+    {
+      return eepromInterface;
+    }
+
+    QString getName() const
+    {
+      return name;
+    }
+
+    QString getId() const
+    {
+      return id;
+    }
+
+    QList<const char *> languageList() const
+    {
+      return languages;
+    }
+
+    OptionsList optionGroups() const
+    {
+      return opts;
+    }
+
+    virtual int getCapability(Capability) = 0;
+
+    virtual QString getAnalogInputName(unsigned int index) = 0;
+
+    virtual QTime getMaxTimerStart() = 0;
+
+    virtual int isAvailable(PulsesProtocol proto, int port=0) = 0;
+
+    const int getFlashSize();
+
+    static Firmware * getFirmwareForId(const QString & id);
+
+    static QVector<Firmware *> getRegisteredFirmwares()
+    {
+      return registeredFirmwares;
+    }
+
+    static void addRegisteredFirmware(Firmware * fw)
+    {
+      registeredFirmwares.append(fw);
+    }
+
+    static Firmware * getDefaultVariant()
+    {
+      return defaultVariant;
+    }
+    static void setDefaultVariant(Firmware * value)
+    {
+      defaultVariant = value;
+    }
+
+    static Firmware * getCurrentVariant()
+    {
+      return currentVariant;
+    }
+
+    static void setCurrentVariant(Firmware * value)
+    {
+      currentVariant = value;
+    }
+
+  protected:
+    QString id;
+    QString name;
+    Board::Type board;
+    unsigned int variantBase;
+    Firmware * base;
+    EEPROMInterface * eepromInterface;
+    QList<const char *> languages;
+    //QList<const char *> ttslanguages;
+    OptionsList opts;
+
+    static QVector<Firmware *> registeredFirmwares;
+    static Firmware * defaultVariant;
+    static Firmware * currentVariant;
+};
+
+inline Firmware * getCurrentFirmware()
+{
+  return Firmware::getCurrentVariant();
+}
+
+inline EEPROMInterface * getCurrentEEpromInterface()
+{
+  return Firmware::getCurrentVariant()->getEEpromInterface();
+}
+
+inline Board::Type getCurrentBoard()
+{
+  return Firmware::getCurrentVariant()->getBoard();
+}
+
+inline int divRoundClosest(const int n, const int d)
+{
+  return ((n < 0) ^ (d < 0)) ? ((n - d/2)/d) : ((n + d/2)/d);
+}
+
+inline int calcRESXto100(int x)
+{
+  return divRoundClosest(x*100, 1024);
+}
+
+extern QList<EEPROMInterface *> eepromInterfaces;
+
+
+#endif // _EEPROMINTERFACE_H_

companion/src/firmwares/er9x/er9xeeprom.cpp

@@ -1,3 +1,23 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
 #include <algorithm>
 #include "er9xeeprom.h"
 #include "helpers.h"
@@ -45,7 +65,7 @@ t_Er9xTrainerData::t_Er9xTrainerData()
 t_Er9xTrainerData::operator TrainerData ()
 {
   TrainerData c9x;
-  for (int i=0; i<NUM_STICKS; i++) {
+  for (int i=0; i<CPN_MAX_STICKS; i++) {
     c9x.calib[i] = calib[i];
     c9x.mix[i] = mix[i];
   }
@@ -61,26 +81,20 @@ Er9xGeneral::operator GeneralSettings ()
 {
   GeneralSettings result;
   result.version = myVers;
-  for (int i=0; i<NUM_STICKSnPOTS; i++) {
+  for (int i=0; i<CPN_MAX_STICKSnPOTS; i++) {
     result.calibMid[i] = calibMid[i];
     result.calibSpanNeg[i] = calibSpanNeg[i];
     result.calibSpanPos[i] = calibSpanPos[i];
   }
 
-  result.currModel = currModel;
+  result.currModelIndex = currModel;
   result.contrast = contrast;
   result.vBatWarn = vBatWarn;
   result.txVoltageCalibration = txVoltageCalibration;
   result.trainer = trainer;
-  result.blightinv=blightinv;
-  result.stickScroll=stickScroll;
-  result.crosstrim=crosstrim;
-  result.hideNameOnSplash=hideNameOnSplash;
-  result.enablePpmsim=enablePpmsim;
 
   result.view = std::min((uint8_t)4, view);
   result.disableThrottleWarning = disableThrottleWarning;
-  result.switchWarning = disableSwitchWarning ? 0 : -1;
   result.disableMemoryWarning = disableMemoryWarning;
 
   switch (beeperVal) {
@@ -103,9 +117,6 @@ Er9xGeneral::operator GeneralSettings ()
   result.preBeep = preBeep;
   result.flashBeep = flashBeep;
   result.splashMode = disableSplashScreen;
-  result.disablePotScroll=(disablePotScroll==1);
-  result.disableBG=(disableBG==1);
-  result.frskyinternalalarm = frskyinternalalarm;
 
   result.backlightMode = 0;
   if (lightSw == 22) {
@@ -126,7 +137,6 @@ Er9xGeneral::operator GeneralSettings ()
   result.speakerPitch = speakerPitch;
   result.hapticStrength = hapticStrength - 3;
   result.speakerMode = speakerMode;
-  result.switchWarningStates =switchWarningStates;
   return result;
 }
 
@@ -402,8 +412,8 @@ t_Er9xModelData::operator ModelData ()
 
   // expoData
   int e = 0;
-  for (int ch = 0; ch < 4 && e < C9X_MAX_EXPOS; ch++) {
-    for (int dr = 0, pos = 0; dr < 3 && e < C9X_MAX_EXPOS; dr++, pos++) {
+  for (int ch = 0; ch < 4 && e < CPN_MAX_EXPOS; ch++) {
+    for (int dr = 0, pos = 0; dr < 3 && e < CPN_MAX_EXPOS; dr++, pos++) {
       if ((dr == 0 && !expoData[ch].drSw1) || (dr == 1 && !expoData[ch].drSw2))
         dr = 2;
       if (dr == 2 && !expoData[ch].expo[0][0][0] && !expoData[ch].expo[0][0][1] && !expoData[ch].expo[0][1][0] && !expoData[ch].expo[0][1][1])
@@ -426,7 +436,7 @@ t_Er9xModelData::operator ModelData ()
       }
       else {
         c9x.expoData[e].mode = 2;
-        if (e < C9X_MAX_EXPOS - 1) {
+        if (e < CPN_MAX_EXPOS - 1) {
           c9x.expoData[e + 1].swtch = c9x.expoData[e].swtch;
           c9x.expoData[++e].chn = ch;
           c9x.expoData[e].mode = 1;
@@ -440,7 +450,7 @@ t_Er9xModelData::operator ModelData ()
     }
   }
 
-  for (int i=0; i<NUM_STICKS; i++)
+  for (int i=0; i<CPN_MAX_STICKS; i++)
     c9x.flightModeData[0].trim[i] = trim[i];
 
   for (int i=0; i<ER9X_MAX_CURVE5; i++) {

companion/src/firmwares/er9x/er9xeeprom.h

@@ -1,7 +1,12 @@
 /*
- * Author - Bertrand Songis <bsongis@gmail.com>
+ * Copyright (C) OpenTX
  *
- * Based on th9x -> http://code.google.com/p/th9x/
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,10 +16,10 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
  */
-#ifndef er9xeeprom_h
-#define er9xeeprom_h
+
+#ifndef _ER9XEEPROM_H_
+#define _ER9XEEPROM_H_
 
 #include <inttypes.h>
 #include "eeprominterface.h"
@@ -29,7 +34,7 @@
 
 #define ER9X_NUM_CHNOUT      16 //number of real outputchannels CH1-CH8
 #define ER9X_NUM_CSW         12 //number of custom switches
-#define NUM_STICKSnPOTS 7  //number of sticks and pots
+#define CPN_MAX_STICKSnPOTS  7  //number of sticks and pots
 #define ER9X_MAX_GVARS 7
 
 #define ER9X_MAX_MODES		4
@@ -54,9 +59,9 @@ PACK(typedef struct t_Er9xTrainerData {
 
 PACK(typedef struct t_Er9xGeneral {
   uint8_t   myVers;
-  int16_t   calibMid[NUM_STICKSnPOTS];
-  int16_t   calibSpanNeg[NUM_STICKSnPOTS];
-  int16_t   calibSpanPos[NUM_STICKSnPOTS];
+  int16_t   calibMid[CPN_MAX_STICKSnPOTS];
+  int16_t   calibSpanNeg[CPN_MAX_STICKSnPOTS];
+  int16_t   calibSpanPos[CPN_MAX_STICKSnPOTS];
   uint16_t  chkSum;
   uint8_t   currModel; //0..15
   uint8_t   contrast;
@@ -131,7 +136,7 @@ PACK(typedef struct t_Er9xLimitData {
 #define MLTPX_REP  2
 
 PACK(typedef struct t_Er9xMixData {
-  uint8_t destCh;            //        1..C9X_NUM_CHNOUT
+  uint8_t destCh;            //        1..CPN_MAX_CHNOUT
   uint8_t srcRaw;            //
   int8_t  weight;
   int8_t  swtch;
@@ -257,4 +262,4 @@ PACK(typedef struct t_Er9xModelData {
   t_Er9xModelData() { memset(this, 0, sizeof(t_Er9xModelData)); }
 }) Er9xModelData;
 
-#endif
+#endif // _ER9XEEPROM_H_

companion/src/firmwares/er9x/er9xinterface.cpp

@@ -1,7 +1,12 @@
 /*
- * Author - Bertrand Songis <bsongis@gmail.com>
- * 
- * Based on th9x -> http://code.google.com/p/th9x/
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,15 +16,14 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
  */
 
-#include <iostream>
 #include "er9xinterface.h"
 #include "er9xeeprom.h"
-#include "simulator/er9xsimulator.h"
-#include "file.h"
-#include "appdata.h"
+#include "rlefile.h"
+// #include "appdata.h"
+// #include <iostream>
+#include <bitset>
 
 #define FILE_TYP_GENERAL 1
 #define FILE_TYP_MODEL   2
@@ -28,8 +32,8 @@
 #define FILE_MODEL(n) (1+n)
 
 Er9xInterface::Er9xInterface():
-EEPROMInterface(BOARD_STOCK),
-efile(new RleFile())
+  EEPROMInterface(Board::BOARD_STOCK),
+  efile(new RleFile())
 {
 }
 
@@ -43,20 +47,6 @@ const char * Er9xInterface::getName()
   return "Er9x";
 }
 
-const int Er9xInterface::getEEpromSize()
-{
-  QString avrMCU = g.mcu();
-  if (avrMCU==QString("m128")) {
-    return 2*EESIZE_STOCK;
-  }
-  return EESIZE_STOCK;
-}
-
-const int Er9xInterface::getMaxModels()
-{
-  return 16;
-}
-
 inline void applyStickModeToModel(Er9xModelData & model, unsigned int mode)
 {
   for (int i=0; i<2; i++) {
@@ -89,23 +79,26 @@ inline void applyStickModeToModel(Er9xModelData & model, unsigned int mode)
   model.swashCollectiveSource = applyStickMode(model.swashCollectiveSource, mode);
 }
 
+#if 0
 unsigned long Er9xInterface::loadxml(RadioData &radioData, QDomDocument &doc)
 {
-  std::cout << "trying er9x xml import... ";
+  QDebug dbg = qDebug();
+  dbg.setAutoInsertSpaces(false);
+  dbg << "trying er9x xml import... ";
 
   std::bitset<NUM_ERRORS> errors;
 
   Er9xGeneral er9xGeneral;
   memset(&er9xGeneral,0,sizeof(er9xGeneral));
-  if(!loadGeneralDataXML(&doc, &er9xGeneral)) {
+  if (!loadRadioSettingsDataXML(&doc, &er9xGeneral)) {
     errors.set(UNKNOWN_ERROR);
     return errors.to_ulong();
-  } else {
-    radioData.generalSettings=er9xGeneral;
-    std::cout << "version " << (unsigned int)er9xGeneral.myVers << " ";
   }
-  for(int i=0; i<getMaxModels(); i++)
-  {
+  else {
+    radioData.generalSettings=er9xGeneral;
+    dbg << "version " << (unsigned int)er9xGeneral.myVers << " ";
+  }
+  for (int i=0; i<getCapability(Models); i++) {
     Er9xModelData er9xModel;
     memset(&er9xModel,0,sizeof(er9xModel));
     if(loadModelDataXML(&doc, &er9xModel, i)) {
@@ -113,43 +106,46 @@ unsigned long Er9xInterface::loadxml(RadioData &radioData, QDomDocument &doc)
       radioData.models[i] = er9xModel;
     }
   }
-  std::cout << "ok\n";
+  dbg << "ok";
   errors.set(ALL_OK);
   return errors.to_ulong();
 }
+#endif
 
 unsigned long Er9xInterface::load(RadioData &radioData, const uint8_t *eeprom, int size)
 {
-  std::cout << "trying er9x import... ";
+  QDebug dbg = qDebug();
+  dbg.setAutoInsertSpaces(false);
+  dbg << "trying er9x import... ";
 
   std::bitset<NUM_ERRORS> errors;
 
-  if (size != getEEpromSize()) {
-    std::cout << "wrong size\n";
+  if (size != Boards::getEEpromSize(Board::BOARD_STOCK)) {
+    dbg << "wrong size";
     errors.set(WRONG_SIZE);
     return errors.to_ulong();
   }
 
-  if (!efile->EeFsOpen((uint8_t *)eeprom, size, BOARD_STOCK)) {
-    std::cout << "wrong file system\n";
+  if (!efile->EeFsOpen((uint8_t *)eeprom, size, Board::BOARD_STOCK)) {
+    dbg << "wrong file system";
     errors.set(WRONG_FILE_SYSTEM);
     return errors.to_ulong();
   }
-    
+
   efile->openRd(FILE_GENERAL);
   Er9xGeneral er9xGeneral;
 
   if (efile->readRlc1((uint8_t*)&er9xGeneral, 1) != 1) {
-    std::cout << "no\n";
+    dbg << "no";
     errors.set(UNKNOWN_ERROR);
     return errors.to_ulong();
   }
 
-  std::cout << "version " << (unsigned int)er9xGeneral.myVers << " ";
+  dbg << "version " << (unsigned int)er9xGeneral.myVers << " ";
 
   switch(er9xGeneral.myVers) {
     case 3:
-      std::cout << "(old gruvin9x) ";
+      dbg << "(old gruvin9x) ";
     case 4:
 //    case 5:
     case 6:
@@ -159,21 +155,21 @@ unsigned long Er9xInterface::load(RadioData &radioData, const uint8_t *eeprom, i
     case 10:
       break;
     default:
-      std::cout << "not er9x\n";
+      dbg << "not er9x";
       errors.set(NOT_ER9X);
       return errors.to_ulong();
   }
 
   efile->openRd(FILE_GENERAL);
   if (!efile->readRlc1((uint8_t*)&er9xGeneral, sizeof(Er9xGeneral))) {
-    std::cout << "ko\n";
+    dbg << "ko";
     errors.set(UNKNOWN_ERROR);
     return errors.to_ulong();
 
   }
   radioData.generalSettings = er9xGeneral;
-  
-  for (int i=0; i<getMaxModels(); i++) {
+
+  for (int i=0; i<getCapability(Models); i++) {
     Er9xModelData er9xModel;
     efile->openRd(FILE_MODEL(i));
     if (!efile->readRlc1((uint8_t*)&er9xModel, sizeof(Er9xModelData))) {
@@ -182,29 +178,21 @@ unsigned long Er9xInterface::load(RadioData &radioData, const uint8_t *eeprom, i
     else {
       applyStickModeToModel(er9xModel, radioData.generalSettings.stickMode+1);
       radioData.models[i] = er9xModel;
-    } 
+    }
   }
 
-  std::cout << "ok\n";
+  dbg << "ok";
   errors.set(ALL_OK);
   return errors.to_ulong();
 }
 
-unsigned long Er9xInterface::loadBackup(RadioData &radioData, uint8_t *eeprom, int esize, int index)
+unsigned long Er9xInterface::loadBackup(RadioData &radioData, const uint8_t *eeprom, int esize, int index)
 {
   std::bitset<NUM_ERRORS> errors;
   errors.set(UNKNOWN_ERROR);
   return errors.to_ulong();
 }
 
-int Er9xInterface::save(uint8_t *eeprom, RadioData &radioData, uint32_t variant, uint8_t version)
-{
-  std::cout << "NO!\n";
-  // TODO an error
-
-  return 0;
-}
-
 int Er9xInterface::getSize(const ModelData &model)
 {
   return 0;
@@ -230,11 +218,11 @@ int Er9xInterface::isAvailable(PulsesProtocol prot, int port)
 
 void Er9xInterface::appendTextElement(QDomDocument * qdoc, QDomElement * pe, QString name, QString value)
 {
-    QDomElement e = qdoc->createElement(name);
-    QDomText t = qdoc->createTextNode(name);
-    t.setNodeValue(value);
-    e.appendChild(t);
-    pe->appendChild(e);
+  QDomElement e = qdoc->createElement(name);
+  QDomText t = qdoc->createTextNode(name);
+  t.setNodeValue(value);
+  e.appendChild(t);
+  pe->appendChild(e);
 }
 
 void Er9xInterface::appendNumberElement(QDomDocument * qdoc, QDomElement * pe,QString name, int value, bool forceZeroWrite)
@@ -276,15 +264,15 @@ QDomElement Er9xInterface::getModelDataXML(QDomDocument * qdoc, Er9xModelData *
   return md;
 }
 
-bool Er9xInterface::loadGeneralDataXML(QDomDocument * qdoc, Er9xGeneral * tgen)
+bool Er9xInterface::loadRadioSettingsDataXML(QDomDocument * qdoc, Er9xGeneral * tgen)
 {
-  //look for "GENERAL_DATA" tag
+  // look for "GENERAL_DATA" tag
   QDomElement gde = qdoc->elementsByTagName("GENERAL_DATA").at(0).toElement();
 
   if(gde.isNull()) // couldn't find
     return false;
 
-  //load cdata into tgen
+  // load cdata into tgen
   QDomNode n = gde.elementsByTagName("Data").at(0).firstChild();// get all children in Data
   while (!n.isNull()) {
     if (n.isCDATASection()) {
@@ -296,17 +284,17 @@ bool Er9xInterface::loadGeneralDataXML(QDomDocument * qdoc, Er9xGeneral * tgen)
     }
     n = n.nextSibling();
   }
-  //check version?
+  // check version?
   return true;
 }
 
 bool Er9xInterface::loadModelDataXML(QDomDocument * qdoc, Er9xModelData * tmod, int modelNum)
 {
-  //look for MODEL_DATA with modelNum attribute.
-  //if modelNum = -1 then just pick the first one
+  // look for MODEL_DATA with modelNum attribute.
+  // if modelNum = -1 then just pick the first one
   QDomNodeList ndl = qdoc->elementsByTagName("MODEL_DATA");
 
-  //cycle through nodes to find correct model number
+  // cycle through nodes to find correct model number
   QDomNode k = ndl.at(0);
   if(modelNum>=0) {
     while(!k.isNull()) {
@@ -317,11 +305,11 @@ bool Er9xInterface::loadModelDataXML(QDomDocument * qdoc, Er9xModelData * tmod,
     }
   }
 
-  if(k.isNull()) // couldn't find
+  if (k.isNull()) // couldn't find
     return false;
 
 
-  //load cdata into tgen
+  // load cdata into tgen
   QDomNode n = k.toElement().elementsByTagName("Data").at(0).firstChild();// get all children in Data
   while (!n.isNull()) {
     if (n.isCDATASection()) {
@@ -333,6 +321,16 @@ bool Er9xInterface::loadModelDataXML(QDomDocument * qdoc, Er9xModelData * tmod,
     }
     n = n.nextSibling();
   }
-  //check version?
+  // check version?
   return true;
 }
+
+int Er9xInterface::getCapability(Capability capability)
+{
+  switch (capability) {
+    case Models:
+      return 16;
+    default:
+      return 0;
+  }
+}

companion/src/firmwares/er9x/er9xinterface.h

@@ -1,7 +1,12 @@
 /*
- * Author - Bertrand Songis <bsongis@gmail.com>
+ * Copyright (C) OpenTX
  *
- * Based on th9x -> http://code.google.com/p/th9x/
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,13 +16,15 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
  */
-#ifndef er9x_interface_h
-#define er9x_interface_h
+
+#ifndef _ER9XINTERFACE_H_
+#define _ER9XINTERFACE_H_
+
 #include <QtXml>
 #include "eeprominterface.h"
 #include "er9xeeprom.h"
+
 class RleFile;
 
 class Er9xInterface : public EEPROMInterface
@@ -30,27 +37,28 @@ class Er9xInterface : public EEPROMInterface
 
     virtual const char * getName();
 
-    virtual const int getEEpromSize();
-
-    virtual const int getMaxModels();
-
     virtual unsigned long load(RadioData &, const uint8_t * eeprom, int size);
 
-    virtual unsigned long loadBackup(RadioData &, uint8_t * eeprom, int esize, int index);
+    virtual unsigned long loadBackup(RadioData &, const uint8_t * eeprom, int esize, int index);
 
     virtual unsigned long loadxml(RadioData &radioData, QDomDocument &doc);
 
-    virtual int save(uint8_t * eeprom, RadioData & radioData, uint32_t variant=0, uint8_t version=0);
+    virtual int save(uint8_t * eeprom, const RadioData & radioData, uint8_t version=0, uint32_t variant=0)
+    {
+      return 0;
+    }
 
     virtual int getSize(const ModelData &);
 
     virtual int getSize(const GeneralSettings &settings);
 
     virtual int isAvailable(PulsesProtocol proto, int port=0);
+    
+    virtual int getCapability(Capability capability);
 
   protected:
 
-    RleFile *efile;
+    RleFile * efile;
 
   private:
     void appendTextElement(QDomDocument * qdoc, QDomElement * pe, QString name, QString value);
@@ -63,10 +71,10 @@ class Er9xInterface : public EEPROMInterface
 
     QDomElement getModelDataXML(QDomDocument * qdoc, Er9xModelData * tmod, int modelNum, int mdver); //parse out data to XML format
 
-    bool loadGeneralDataXML(QDomDocument * qdoc, Er9xGeneral * tgen); // get data from XML
+    bool loadRadioSettingsDataXML(QDomDocument * qdoc, Er9xGeneral * tgen); // get data from XML
 
     bool loadModelDataXML(QDomDocument * qdoc, Er9xModelData * tmod, int modelNum = -1); // get data from XML
 
 };
 
-#endif
+#endif // _ER9XINTERFACE_H_

companion/src/firmwares/er9x/simulator/CMakeLists.txt

@@ -1,15 +0,0 @@
-set(ER9X_CHECKOUT_DIRECTORY ${PROJECT_BINARY_DIR}/firmwares/er9x)
-add_custom_command(
-  OUTPUT ${ER9X_CHECKOUT_DIRECTORY}/er9xsimulator.cpp
-  COMMAND ${CMAKE_COMMAND} -E make_directory ${ER9X_CHECKOUT_DIRECTORY}
-  COMMAND cd ${ER9X_CHECKOUT_DIRECTORY} && svn checkout http://er9x.googlecode.com/svn/trunk/src@790 .
-  COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_CURRENT_SOURCE_DIR}/firmwares/er9x/er9xsimulator.cpp ${ER9X_CHECKOUT_DIRECTORY}
-  DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/firmwares/er9x/er9xsimulator.cpp
-)
-
-include_directories(
-  ${CMAKE_CURRENT_BINARY_DIR}
-  ${PROJECT_SOURCE_DIR}
-)
-
-add_library(er9x-simulator er9xsimulator.cpp)

companion/src/firmwares/er9x/simulator/er9xsimulator.cpp

@@ -1,224 +0,0 @@
-/*
- * Author - Bertrand Songis <bsongis@gmail.com>
- * 
- * Based on th9x -> http://code.google.com/p/th9x/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include "firmwares/er9x/er9xsimulator.h"
-#include "firmwares/er9x/er9xinterface.h"
-
-#define SIMU
-#define SIMU_EXCEPTIONS
-#define TELEMETRY_FRSKY
-#define PHASES
-#undef min
-#undef max
-
-#define NUM_POTS                       3
-#define NUM_SLIDERS                    0
-#define SWSRC_SW1                      DSW_SW1
-
-#include <exception>
-
-namespace Er9x {
-
-#include "simpgmspace.h"
-#include "er9x.cpp"
-#include "stamp.cpp"
-#include "menus.cpp"
-#include "pers.cpp"
-#include "file.cpp"
-#include "lcd.cpp"
-#include "drivers.cpp"
-#include "simpgmspace.cpp"
-#include "templates.cpp"
-#include "frsky.cpp"
-#include "audio.cpp"
-
-uint8_t pxxFlag = 0;
-int16_t g_anas[7];
-
-#define isBacklightEnabled() (PORTB & (1<<OUT_B_LIGHT))
-
-uint16_t anaIn(uint8_t chan)
-{
-  if (chan == 7)
-    return 1500;
-  else
-    return g_anas[chan];
-}
-
-bool hasExtendedTrims()
-{
-  return false;
-}
-
-void setTrim(uint8_t idx, int8_t value)
-{
-  g_model.trim[idx] = value;
-}
-
-void getTrims(int16_t values[4])
-{
-  for (int i=0; i<4; i++)
-    values[i] = g_model.trim[i];
-}
-
-#define TRIMS_GPIO_REG_LHL         pind
-#define TRIMS_GPIO_REG_LVD        pind
-#define TRIMS_GPIO_REG_RVU        pind
-#define TRIMS_GPIO_REG_RHL         pind
-#define TRIMS_GPIO_REG_LHR         pind
-#define TRIMS_GPIO_REG_LVU        pind
-#define TRIMS_GPIO_REG_RVD        pind
-#define TRIMS_GPIO_REG_RHR         pind
-#define PIN_TRIM_LH_L          (1<<INP_D_TRM_LH_DWN)
-#define PIN_TRIM_LV_DN         (1<<INP_D_TRM_LV_DWN)
-#define PIN_TRIM_RV_UP         (1<<INP_D_TRM_RV_UP)
-#define PIN_TRIM_RH_L          (1<<INP_D_TRM_RH_DWN)
-#define PIN_TRIM_LH_R          (1<<INP_D_TRM_LH_UP)
-#define PIN_TRIM_LV_UP         (1<<INP_D_TRM_LV_UP)
-#define PIN_TRIM_RV_DN         (1<<INP_D_TRM_RV_DWN)
-#define PIN_TRIM_RH_R          (1<<INP_D_TRM_RH_UP)
-
-#define TRIM_CASE(key, pin, mask) \
-    case key: \
-      if (state) pin |= mask; else pin &= ~mask;\
-      break;
-
-void simuSetTrim(uint8_t trim, bool state)
-{
-  switch (trim) {
-    TRIM_CASE(0, TRIMS_GPIO_REG_LHL, PIN_TRIM_LH_L)
-    TRIM_CASE(1, TRIMS_GPIO_REG_LHR, PIN_TRIM_LH_R)
-    TRIM_CASE(2, TRIMS_GPIO_REG_LVD, PIN_TRIM_LV_DN)
-    TRIM_CASE(3, TRIMS_GPIO_REG_LVU, PIN_TRIM_LV_UP)
-    TRIM_CASE(4, TRIMS_GPIO_REG_RVD, PIN_TRIM_RV_DN)
-    TRIM_CASE(5, TRIMS_GPIO_REG_RVU, PIN_TRIM_RV_UP)
-    TRIM_CASE(6, TRIMS_GPIO_REG_RHL, PIN_TRIM_RH_L)
-    TRIM_CASE(7, TRIMS_GPIO_REG_RHR, PIN_TRIM_RH_R)
-  }
-}
-
-#define SWITCH_CASE(swtch, pin, mask) \
-    case swtch: \
-      if (state) pin &= ~(mask); else pin |= (mask); \
-      break;
-#define SWITCH_3_CASE(swtch, pin1, pin2, mask1, mask2) \
-    case swtch: \
-      if (state >= 0) pin1 &= ~(mask1); else pin1 |= (mask1); \
-      if (state <= 0) pin2 &= ~(mask2); else pin2 |= (mask2); \
-      break;
-
-void simuSetSwitch(uint8_t swtch, int8_t state)
-{
-  switch (swtch) {
-    SWITCH_CASE(0, pinc, 1<<INP_C_ThrCt)
-    SWITCH_CASE(4, pinc, 1<<INP_C_AileDR)
-    SWITCH_3_CASE(3, ping, pine, (1<<INP_G_ID1), (1<<INP_E_ID2))
-    SWITCH_CASE(1, ping, 1<<INP_G_RuddDR)
-    SWITCH_CASE(2, pine, 1<<INP_E_ElevDR)
-    SWITCH_CASE(5, pine, 1<<INP_E_Gear)
-    SWITCH_CASE(6, pine, 1<<INP_E_Trainer)
-    default:
-      break;
-  }
-}
-
-#define KEY_CASE(key, pin, mask) \
-    case key: \
-      if (state) pin |= mask; else pin &= ~mask;\
-      break;
-
-void simuSetKey(uint8_t key, bool state)
-{
-  switch (key) {
-    KEY_CASE(KEY_MENU, pinb, (1<<INP_B_KEY_MEN))
-    KEY_CASE(KEY_EXIT, pinb, (1<<INP_B_KEY_EXT))
-    KEY_CASE(KEY_RIGHT, pinb, (1<<INP_B_KEY_RGT))
-    KEY_CASE(KEY_LEFT, pinb, (1<<INP_B_KEY_LFT))
-    KEY_CASE(KEY_UP, pinb, (1<<INP_B_KEY_UP))
-    KEY_CASE(KEY_DOWN, pinb, (1<<INP_B_KEY_DWN))
-  }
-}
-
-#define isBacklightEnabled() (PORTB & (1<<OUT_B_LIGHT))
-
-}
-
-using namespace Er9x;
-
-Er9xSimulator::Er9xSimulator(Er9xInterface * er9xInterface):
-  er9xInterface(er9xInterface)
-{
-}
-
-bool Er9xSimulator::timer10ms()
-{
-  AUDIO_DRIVER();  // the tone generator
-  AUDIO_HEARTBEAT();  // the queue processing
-#define TIMER10MS_IMPORT
-#include "simulatorimport.h"
-}
-
-uint8_t * Er9xSimulator::getLcd()
-{
-  return (::uint8_t *)simuLcdBuf;
-}
-
-bool Er9xSimulator::lcdChanged(bool & lightEnable)
-{
-#define LCDCHANGED_IMPORT
-#include "simulatorimport.h"
-}
-
-void Er9xSimulator::start(RadioData &radioData, bool tests)
-{
-  er9xInterface->save(&eeprom[0], radioData);
-  StartMainThread(tests);
-}
-
-void Er9xSimulator::stop()
-{
-  StopMainThread();
-}
-
-void Er9xSimulator::getValues(TxOutputs &outputs)
-{
-#define GETVALUES_IMPORT
-#include "simulatorimport.h"
-  outputs.beep = audio.busy();
-}
-
-void Er9xSimulator::setValues(TxInputs &inputs)
-{
-#define SETVALUES_IMPORT
-#include "simulatorimport.h"
-}
-
-void Er9xSimulator::setTrim(unsigned int idx, int value)
-{
-  Er9x::setTrim(idx, value);
-}
-
-void Er9xSimulator::getTrims(Trims & trims)
-{
-  trims.extended = false;
-  Er9x::getTrims(trims.values);
-}
-
-const char * Er9xSimulator::getError()
-{
-#define GETERROR_IMPORT
-#include "simulatorimport.h"
-}

companion/src/firmwares/er9x/simulator/er9xsimulator.h

@@ -1,70 +0,0 @@
-/*
- * Author - Bertrand Songis <bsongis@gmail.com>
- * 
- * Based on th9x -> http://code.google.com/p/th9x/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef er9x_simulator_h
-#define er9x_simulator_h
-
-#include "simulatorinterface.h"
-
-class RadioData;
-class Er9xInterface;
-
-class Er9xSimulator : public SimulatorInterface {
-
-  public:
-
-    Er9xSimulator(Er9xInterface *);
-
-    virtual void start(RadioData & radioData, bool tests);
-
-    virtual void stop();
-
-    virtual bool timer10ms();
-
-    virtual uint8_t * getLcd();
-
-    virtual bool lcdChanged(bool & lightEnable);
-
-    virtual void setValues(TxInputs &inputs);
-
-    virtual void getValues(TxOutputs &outputs);
-
-    virtual void setTrim(unsigned int idx, int value);
-
-    virtual void getTrims(Trims & trims);
-
-    virtual unsigned int getPhase() { return 0; }
-
-    virtual const char * getPhaseName(unsigned int phase) { return 0; }
-
-    virtual const char * getError();
-
-    virtual void sendTelemetry(uint8_t * data, unsigned int len) {};
-
-    virtual uint8_t getSensorInstance(uint16_t id, uint8_t defaultValue = 0) { return 0; };
-
-    virtual uint16_t getSensorRatio(uint16_t id) { return 0; };
-
-    virtual void setTrainerInput(unsigned int inputNumber, int16_t value) {};
-
-    virtual void setLuaStateReloadPermanentScripts() {};
-
-  protected:
-
-    Er9xInterface * er9xInterface;
-};
-
-#endif

companion/src/firmwares/ersky9x/ersky9xeeprom.cpp

@@ -1,3 +1,23 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
 #include <algorithm>
 #include "helpers.h"
 #include "ersky9xeeprom.h"
@@ -55,7 +75,7 @@ t_Ersky9xTrainerData::t_Ersky9xTrainerData()
 t_Ersky9xTrainerData::operator TrainerData ()
 {
   TrainerData c9x;
-  for (int i=0; i<NUM_STICKS; i++) {
+  for (int i=0; i<CPN_MAX_STICKS; i++) {
     c9x.calib[i] = calib[i];
     c9x.mix[i] = mix[i];
   }
@@ -73,13 +93,13 @@ Ersky9xGeneral::operator GeneralSettings ()
   
   result.version = myVers;
   
-  for (int i=0; i<NUM_STICKSnPOTS; i++) {
+  for (int i=0; i<CPN_MAX_STICKSnPOTS; i++) {
     result.calibMid[i] = calibMid[i];
     result.calibSpanNeg[i] = calibSpanNeg[i];
     result.calibSpanPos[i] = calibSpanPos[i];
   }
 
-  result.currModel = currModel;
+  result.currModelIndex = currModel;
   result.contrast = contrast;
   result.vBatWarn = vBatWarn;
   result.txVoltageCalibration = txVoltageCalibration;
@@ -100,7 +120,6 @@ Ersky9xGeneral::operator GeneralSettings ()
   result.trainer = trainer;
   result.view = std::min((uint8_t)4, view);
   result.disableThrottleWarning = disableThrottleWarning;
-  result.switchWarning = disableSwitchWarning ? 0 : -1;
   result.disableMemoryWarning = disableMemoryWarning;
 
   switch (beeperVal) {
@@ -123,8 +142,6 @@ Ersky9xGeneral::operator GeneralSettings ()
   result.preBeep = preBeep;
   result.flashBeep = flashBeep;
   result.splashMode = disableSplashScreen;
-  result.disablePotScroll=(disablePotScroll==1);
-  result.disableBG=(disableBG==1);
   result.templateSetup = templateSetup;
   result.PPM_Multiplier = PPM_Multiplier;
   getEEPROMString(result.ownerName, ownerName, sizeof(ownerName));
@@ -132,7 +149,6 @@ Ersky9xGeneral::operator GeneralSettings ()
   result.speakerPitch = speakerPitch;
   result.hapticStrength = hapticStrength - 3;
   result.speakerMode = speakerMode;
-  result.switchWarningStates = switchWarningStates;
   result.speakerVolume = volume;
   result.backlightBright = bright ;
   result.txCurrentCalibration = current_calib;
@@ -530,8 +546,8 @@ t_Ersky9xModelData_v10::operator ModelData ()
 
   // expoData
   int e = 0;
-  for (int ch = 0; ch < 4 && e < C9X_MAX_EXPOS; ch++) {
-    for (int dr = 0, pos = 0; dr < 3 && e < C9X_MAX_EXPOS; dr++, pos++) {
+  for (int ch = 0; ch < 4 && e < CPN_MAX_EXPOS; ch++) {
+    for (int dr = 0, pos = 0; dr < 3 && e < CPN_MAX_EXPOS; dr++, pos++) {
       if ((dr == 0 && !expoData[ch].drSw1) || (dr == 1 && !expoData[ch].drSw2))
         dr = 2;
       if (dr == 2 && !expoData[ch].expo[0][0][0] && !expoData[ch].expo[0][0][1] && !expoData[ch].expo[0][1][0] && !expoData[ch].expo[0][1][1])
@@ -554,7 +570,7 @@ t_Ersky9xModelData_v10::operator ModelData ()
       }
       else {
         c9x.expoData[e].mode = 2;
-        if (e < C9X_MAX_EXPOS - 1) {
+        if (e < CPN_MAX_EXPOS - 1) {
           c9x.expoData[e + 1].swtch = c9x.expoData[e].swtch;
           c9x.expoData[++e].chn = ch;
           c9x.expoData[e].mode = 1;
@@ -568,7 +584,7 @@ t_Ersky9xModelData_v10::operator ModelData ()
     }
   }
 
-  for (int i=0; i<NUM_STICKS; i++)
+  for (int i=0; i<CPN_MAX_STICKS; i++)
     c9x.flightModeData[0].trim[i] = trim[i];
 
   for (int i=0; i<ERSKY9X_MAX_CURVE5; i++) {
@@ -645,8 +661,8 @@ t_Ersky9xModelData_v11::operator ModelData ()
 
   // expoData
   int e = 0;
-  for (int ch = 0; ch < 4 && e < C9X_MAX_EXPOS; ch++) {
-    for (int dr = 0, pos = 0; dr < 3 && e < C9X_MAX_EXPOS; dr++, pos++) {
+  for (int ch = 0; ch < 4 && e < CPN_MAX_EXPOS; ch++) {
+    for (int dr = 0, pos = 0; dr < 3 && e < CPN_MAX_EXPOS; dr++, pos++) {
       if ((dr == 0 && !expoData[ch].drSw1) || (dr == 1 && !expoData[ch].drSw2))
         dr = 2;
       if (dr == 2 && !expoData[ch].expo[0][0][0] && !expoData[ch].expo[0][0][1] && !expoData[ch].expo[0][1][0] && !expoData[ch].expo[0][1][1])
@@ -669,7 +685,7 @@ t_Ersky9xModelData_v11::operator ModelData ()
       }
       else {
         c9x.expoData[e].mode = 2;
-        if (e < C9X_MAX_EXPOS - 1) {
+        if (e < CPN_MAX_EXPOS - 1) {
           c9x.expoData[e + 1].swtch = c9x.expoData[e].swtch;
           c9x.expoData[++e].chn = ch;
           c9x.expoData[e].mode = 1;
@@ -683,7 +699,7 @@ t_Ersky9xModelData_v11::operator ModelData ()
     }
   }
 
-  for (int i=0; i<NUM_STICKS; i++)
+  for (int i=0; i<CPN_MAX_STICKS; i++)
     c9x.flightModeData[0].trim[i] = trim[i];
 
   for (int i=0; i<ERSKY9X_MAX_CURVE5; i++) {

companion/src/firmwares/ersky9x/ersky9xeeprom.h

@@ -1,7 +1,12 @@
 /*
- * Author - Bertrand Songis <bsongis@gmail.com>
+ * Copyright (C) OpenTX
  *
- * Based on th9x -> http://code.google.com/p/th9x/
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,10 +16,10 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
  */
-#ifndef ersky9xeeprom_h
-#define ersky9xeeprom_h
+
+#ifndef _ERSKY9XEEPROM_H_
+#define _ERSKY9XEEPROM_H_
 
 #include <inttypes.h>
 #include "eeprominterface.h"
@@ -40,7 +45,7 @@ extern RawSwitch getEr9xTimerMode(int mode);
 #define ERSKY9X_NUM_VOICE	         8
 #define ERSKY9X_MAX_GVARS	         7
 
-#define NUM_STICKSnPOTS 7  //number of sticks and pots
+#define CPN_MAX_STICKSnPOTS 7  //number of sticks and pots
 
 PACK(typedef struct t_Ersky9xTrainerMix {
   uint8_t srcChn:3; //0-7 = ch1-8
@@ -62,9 +67,9 @@ PACK(typedef struct t_Ersky9xTrainerData {
 
 PACK(typedef struct t_Ersky9xGeneral {
   uint8_t   myVers;
-  int16_t   calibMid[NUM_STICKSnPOTS];
-  int16_t   calibSpanNeg[NUM_STICKSnPOTS];
-  int16_t   calibSpanPos[NUM_STICKSnPOTS];
+  int16_t   calibMid[CPN_MAX_STICKSnPOTS];
+  int16_t   calibSpanNeg[CPN_MAX_STICKSnPOTS];
+  int16_t   calibSpanPos[CPN_MAX_STICKSnPOTS];
   uint16_t  chkSum;
   uint8_t   currModel; //0..15
   uint8_t   contrast;
@@ -143,7 +148,7 @@ PACK(typedef struct t_Ersky9xLimitData {
 #define MLTPX_REP  2
 
 PACK(typedef struct t_Ersky9xMixData_v10 {
-  uint8_t destCh;            //        1..C9X_NUM_CHNOUT
+  uint8_t destCh;            //        1..CPN_MAX_CHNOUT
   uint8_t srcRaw;            //
   int8_t  weight;
   int8_t  swtch;
@@ -165,7 +170,7 @@ PACK(typedef struct t_Ersky9xMixData_v10 {
 }) Ersky9xMixData_v10;
 
 PACK(typedef struct t_Ersky9xMixData_v11 {
-  uint8_t destCh;            //        1..C9X_NUM_CHNOUT
+  uint8_t destCh;            //        1..CPN_MAX_CHNOUT
   uint8_t srcRaw;            //
   int8_t  weight;
   int8_t  swtch;
@@ -428,4 +433,4 @@ PACK(typedef struct t_Ersky9xModelData_v11 {
   t_Ersky9xModelData_v11() { memset(this, 0, sizeof(t_Ersky9xModelData_v11)); }
 }) Ersky9xModelData_v11;
 
-#endif
+#endif // _ERSKY9XEEPROM_H_

companion/src/firmwares/ersky9x/ersky9xinterface.cpp

@@ -1,7 +1,12 @@
 /*
- * Author - Bertrand Songis <bsongis@gmail.com>
- * 
- * Based on th9x -> http://code.google.com/p/th9x/
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,14 +16,13 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
  */
 
-#include <iostream>
 #include "ersky9xinterface.h"
 #include "ersky9xeeprom.h"
-#include "simulator/ersky9xsimulator.h"
-#include "file.h"
+#include "rlefile.h"
+#include <iostream>
+#include <bitset>
 
 #define FILE_TYP_GENERAL 1
 #define FILE_TYP_MODEL   2
@@ -30,7 +34,7 @@
 #define FILE_TMP      (1+16)
 
 Ersky9xInterface::Ersky9xInterface():
-EEPROMInterface(BOARD_SKY9X),
+EEPROMInterface(Board::BOARD_SKY9X),
 efile(new RleFile())
 {
 }
@@ -45,16 +49,6 @@ const char * Ersky9xInterface::getName()
   return "Ersky9x";
 }
 
-const int Ersky9xInterface::getEEpromSize()
-{
-  return EESIZE_SKY9X;
-}
-
-const int Ersky9xInterface::getMaxModels()
-{
-  return 20;
-}
-
 inline void applyStickModeToModel(Ersky9xModelData_v10 & model, unsigned int mode)
 {
   for (int i=0; i<2; i++) {
@@ -119,71 +113,77 @@ inline void applyStickModeToModel(Ersky9xModelData_v11 & model, unsigned int mod
   model.swashCollectiveSource = applyStickMode(model.swashCollectiveSource, mode);
 }
 
+#if 0
 unsigned long Ersky9xInterface::loadxml(RadioData &radioData, QDomDocument &doc)
 {
-  std::cout << "trying ersky9x xml import... ";
+  QDebug dbg = qDebug();
+  dbg.setAutoInsertSpaces(false);
+  dbg << "trying ersky9x xml import... ";
 
   std::bitset<NUM_ERRORS> errors;
 
   Ersky9xGeneral ersky9xGeneral;
   memset(&ersky9xGeneral,0,sizeof(ersky9xGeneral));
-  if(!loadGeneralDataXML(&doc, &ersky9xGeneral)) {
+  if(!loadRadioSettingsDataXML(&doc, &ersky9xGeneral)) {
     errors.set(UNKNOWN_ERROR);
     return errors.to_ulong();
   }
   else {
     radioData.generalSettings=ersky9xGeneral;
-    std::cout << "version " << (unsigned int)ersky9xGeneral.myVers << " ";
+    dbg << "version " << (unsigned int)ersky9xGeneral.myVers << " ";
   }
-  for(int i=0; i<getMaxModels(); i++) {
+  for(int i=0; i<getCapability(Models); i++) {
     if (ersky9xGeneral.myVers == 10) {
       if (!loadModelDataXML<Ersky9xModelData_v10>(&doc, &radioData.models[i], i, radioData.generalSettings.stickMode+1)) {
-        std::cout << "ko\n";
+        dbg << "ko";
         errors.set(UNKNOWN_ERROR);
         return errors.to_ulong();
       }
     }
     else {
       if (!loadModelDataXML<Ersky9xModelData_v11>(&doc, &radioData.models[i], i, radioData.generalSettings.stickMode+1)) {
-        std::cout << "ko\n";
+        dbg << "ko";
         errors.set(UNKNOWN_ERROR);
         return errors.to_ulong();
       }
     }
   }
-  std::cout << "ok\n";
+  dbg << "ok";
   errors.set(ALL_OK);
   return errors.to_ulong();
 }
+#endif
 
 unsigned long Ersky9xInterface::load(RadioData &radioData, const uint8_t *eeprom, int size)
 {
-  std::cout << "trying ersky9x import... ";
+  QDebug dbg = qDebug();
+  dbg.setAutoInsertSpaces(false);
+  dbg << "trying ersky9x import... ";
 
   std::bitset<NUM_ERRORS> errors;
 
-  if (size != EESIZE_SKY9X) {
-    std::cout << "wrong size\n";
+  if (size != Boards::getEEpromSize(Board::BOARD_SKY9X)) {
+    dbg << "wrong size";
     errors.set(WRONG_SIZE);
     return errors.to_ulong();
   }
 
-  if (!efile->EeFsOpen((uint8_t *)eeprom, size, BOARD_SKY9X)) {
-    std::cout << "wrong file system\n";
+  if (!efile->EeFsOpen((uint8_t *)eeprom, size, Board::BOARD_SKY9X)) {
+    dbg << "wrong file system";
     errors.set(WRONG_FILE_SYSTEM);
     return errors.to_ulong();
   }
-    
+
   efile->openRd(FILE_GENERAL);
   Ersky9xGeneral ersky9xGeneral;
 
   if (efile->readRlc2((uint8_t*)&ersky9xGeneral, 1) != 1) {
-    std::cout << "no\n";
+    dbg << "no";
     errors.set(UNKNOWN_ERROR);
     return errors.to_ulong();
   }
 
-  std::cout << "version " << (unsigned int)ersky9xGeneral.myVers << " ";
+  dbg << "version " << (unsigned int)ersky9xGeneral.myVers << " ";
 
   switch(ersky9xGeneral.myVers) {
     case 10:
@@ -191,26 +191,26 @@ unsigned long Ersky9xInterface::load(RadioData &radioData, const uint8_t *eeprom
     case 11:
       break;
     default:
-      std::cout << "not ersky9x\n";
+      dbg << "not ersky9x";
       errors.set(NOT_ERSKY9X);
       return errors.to_ulong();
   }
   efile->openRd(FILE_GENERAL);
   if (!efile->readRlc2((uint8_t*)&ersky9xGeneral, sizeof(Ersky9xGeneral))) {
-    std::cout << "ko\n";
+    dbg << "ko";
     errors.set(UNKNOWN_ERROR);
     return errors.to_ulong();
   }
   radioData.generalSettings = ersky9xGeneral;
-  
-  for (int i=0; i<getMaxModels(); i++) {
+
+  for (int i=0; i<getCapability(Models); i++) {
     uint8_t buffer[4096];
     uint size;
     memset(buffer,0,sizeof(buffer));
     efile->openRd(FILE_MODEL(i));
-    
+
 //    if (!efile->readRlc2((uint8_t*)&ersky9xModel, sizeof(Ersky9xModelData))) {
-    size=efile->readRlc2(buffer, 4096);
+    size = efile->readRlc2(buffer, 4096);
     if (!size) {
       radioData.models[i].clear();
     }
@@ -226,29 +226,21 @@ unsigned long Ersky9xInterface::load(RadioData &radioData, const uint8_t *eeprom
         applyStickModeToModel(ersky9xModel, radioData.generalSettings.stickMode+1);
         radioData.models[i] = ersky9xModel;
       }
-    } 
+    }
   }
 
-  std::cout << "ok\n";
+  dbg << "ok";
   errors.set(ALL_OK);
   return errors.to_ulong();
 }
 
-unsigned long Ersky9xInterface::loadBackup(RadioData &radioData, uint8_t *eeprom, int esize, int index)
+unsigned long Ersky9xInterface::loadBackup(RadioData &radioData, const uint8_t *eeprom, int esize, int index)
 {
   std::bitset<NUM_ERRORS> errors;
   errors.set(UNKNOWN_ERROR);
   return errors.to_ulong();
 }
 
-int Ersky9xInterface::save(uint8_t *eeprom, RadioData &radioData, uint32_t variant, uint8_t version)
-{
-  std::cout << "NO!\n";
-  // TODO an error
-
-  return 0;
-}
-
 int Ersky9xInterface::getSize(const ModelData & model)
 {
   return 0;
@@ -320,15 +312,15 @@ QDomElement Ersky9xInterface::getModelDataXML(QDomDocument * qdoc, Ersky9xModelD
   return md;
 }
 
-bool Ersky9xInterface::loadGeneralDataXML(QDomDocument * qdoc, Ersky9xGeneral * tgen)
+bool Ersky9xInterface::loadRadioSettingsDataXML(QDomDocument * qdoc, Ersky9xGeneral * tgen)
 {
-  //look for "GENERAL_DATA" tag
+  // look for "GENERAL_DATA" tag
   QDomElement gde = qdoc->elementsByTagName("GENERAL_DATA").at(0).toElement();
 
   if(gde.isNull()) // couldn't find
     return false;
 
-  //load cdata into tgen
+  // load cdata into tgen
   QDomNode n = gde.elementsByTagName("Data").at(0).firstChild();// get all children in Data
   while (!n.isNull()) {
     if (n.isCDATASection()) {
@@ -340,7 +332,7 @@ bool Ersky9xInterface::loadGeneralDataXML(QDomDocument * qdoc, Ersky9xGeneral *
     }
     n = n.nextSibling();
   }
-  //check version?
+  // check version?
   return true;
 }
 
@@ -350,11 +342,11 @@ bool Ersky9xInterface::loadModelDataXML(QDomDocument * qdoc, ModelData *model, i
   T ersky9xModel;
   memset(&ersky9xModel, 0, sizeof(ersky9xModel));
 
-  //look for MODEL_DATA with modelNum attribute.
+  // look for MODEL_DATA with modelNum attribute.
   //if modelNum = -1 then just pick the first one
   QDomNodeList ndl = qdoc->elementsByTagName("MODEL_DATA");
 
-  //cycle through nodes to find correct model number
+  // cycle through nodes to find correct model number
   QDomNode k = ndl.at(0);
   if (modelNum>=0) {
     while(!k.isNull()) {
@@ -368,7 +360,7 @@ bool Ersky9xInterface::loadModelDataXML(QDomDocument * qdoc, ModelData *model, i
   if (k.isNull()) // couldn't find
     return false;
 
-  //load cdata into tgen
+  // load cdata into tgen
   QDomNode n = k.toElement().elementsByTagName("Data").at(0).firstChild();// get all children in Data
   while (!n.isNull()) {
     if (n.isCDATASection()) {
@@ -385,3 +377,13 @@ bool Ersky9xInterface::loadModelDataXML(QDomDocument * qdoc, ModelData *model, i
   *model = ersky9xModel;
   return true;
 }
+
+int Ersky9xInterface::getCapability(Capability capability)
+{
+  switch (capability) {
+    case Models:
+      return 20;
+    default:
+      return 0;
+  }
+}

companion/src/firmwares/ersky9x/ersky9xinterface.h

@@ -1,7 +1,12 @@
 /*
- * Author - Bertrand Songis <bsongis@gmail.com>
- * 
- * Based on th9x -> http://code.google.com/p/th9x/
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,13 +16,15 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
  */
-#ifndef ersky9x_interface_h
-#define ersky9x_interface_h
+
+#ifndef _ERSKY9XINTERFACE_H_
+#define _ERSKY9XINTERFACE_H_
+
 #include <QtXml>
 #include "eeprominterface.h"
 #include "ersky9xeeprom.h"
+
 class RleFile;
 
 class Ersky9xInterface : public EEPROMInterface
@@ -30,27 +37,27 @@ class Ersky9xInterface : public EEPROMInterface
 
     virtual const char * getName();
     
-    virtual const int  getEEpromSize();
-
-    virtual const int getMaxModels();
-
+    
     virtual unsigned long load(RadioData &, const uint8_t * eeprom, int size);
 
-    virtual unsigned long loadBackup(RadioData &, uint8_t * eeprom, int esize, int index);
-
-    virtual unsigned long loadxml(RadioData &radioData, QDomDocument &doc);
-
-    virtual int save(uint8_t * eeprom, RadioData & radioData, uint32_t variant=0, uint8_t version=0);
+    virtual unsigned long loadBackup(RadioData &, const uint8_t * eeprom, int esize, int index);
+    
+    virtual int save(uint8_t * eeprom, const RadioData & radioData, uint8_t version=0, uint32_t variant=0)
+    {
+      return 0;
+    }
 
     virtual int getSize(const ModelData &);
     
     virtual int getSize(const GeneralSettings & settings);
 
     virtual int isAvailable(PulsesProtocol proto, int port=0);
+    
+    virtual int getCapability(Capability capability);
 
   protected:
 
-    RleFile *efile;
+    RleFile * efile;
 
   private:
     void appendTextElement(QDomDocument * qdoc, QDomElement * pe, QString name, QString value);
@@ -63,11 +70,11 @@ class Ersky9xInterface : public EEPROMInterface
     
     QDomElement getModelDataXML(QDomDocument * qdoc, Ersky9xModelData_v11 * tmod, int modelNum, int mdver); //parse out data to XML format
     
-    bool loadGeneralDataXML(QDomDocument * qdoc, Ersky9xGeneral * tgen); // get data from XML
+    bool loadRadioSettingsDataXML(QDomDocument * qdoc, Ersky9xGeneral * tgen); // get data from XML
     
     template <class T>
     bool loadModelDataXML(QDomDocument * qdoc, ModelData * model, int modelNum, int stickMode); // get data from XML
 
 };
 
-#endif
+#endif // _ERSKY9XINTERFACE_H_

companion/src/firmwares/ersky9x/simulator/CMakeLists.txt

@@ -1,15 +0,0 @@
-set(ERSKY9X_CHECKOUT_DIRECTORY ${PROJECT_BINARY_DIR}/firmwares/ersky9x)
-add_custom_command(
-  OUTPUT ${ERSKY9X_CHECKOUT_DIRECTORY}/ersky9xsimulator.cpp
-  COMMAND ${CMAKE_COMMAND} -E make_directory ${ERSKY9X_CHECKOUT_DIRECTORY}
-  COMMAND cd ${ERSKY9X_CHECKOUT_DIRECTORY} && svn checkout http://ersky9x.googlecode.com/svn/trunk/src@170 .
-  COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_CURRENT_SOURCE_DIR}/firmwares/ersky9x/ersky9xsimulator.cpp ${ERSKY9X_CHECKOUT_DIRECTORY}
-  DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/firmwares/ersky9x/ersky9xsimulator.cpp
-)
-
-include_directories(
-  ${CMAKE_CURRENT_BINARY_DIR}
-  ${PROJECT_SOURCE_DIR}
-)
-
-add_library(ersky9x-simulator ersky9xsimulator.cpp)

companion/src/firmwares/ersky9x/simulator/ersky9xsimulator.cpp

@@ -1,247 +0,0 @@
-/*
- * Author - Bertrand Songis <bsongis@gmail.com>
- * 
- * Based on th9x -> http://code.google.com/p/th9x/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include "firmwares/ersky9x/ersky9xsimulator.h"
-#include "firmwares/ersky9x/ersky9xinterface.h"
-
-#define SIMU
-#define SIMU_EXCEPTIONS
-#define PCBSKY9X
-#define PCBSKY
-#define STAMP
-#define TELEMETRY_FRSKY
-#define FRSKY_HUB
-#define WS_HOW_HIGH
-#define TEMPLATES
-#define HELI
-#define HAPTIC
-#define AUDIO
-#define REVB
-
-#define NUM_POTS                       3
-#define NUM_SLIDERS                    0
-#define SWSRC_SW1                      DSW_SW1
-
-#undef min
-#undef max
-
-#include <exception>
-
-namespace Ersky9x {
-
-#include "../ersky9x/timers.h"
-#include "../ersky9x/ersky9x.cpp"
-#include "../ersky9x/stamp.cpp"
-#include "../ersky9x/menus.cpp"
-#include "../ersky9x/pers.cpp"
-#include "../ersky9x/file.cpp"
-#include "../ersky9x/lcd.cpp"
-#include "../ersky9x/drivers.cpp"
-#include "../ersky9x/logicio.cpp"
-#include "../ersky9x/timers.cpp"
-#include "../ersky9x/simpgmspace.cpp"
-#include "../ersky9x/templates.cpp"
-#include "../ersky9x/frsky.cpp"
-#include "../ersky9x/audio.cpp"
-#include "../ersky9x/sound.cpp"
-#include "../ersky9x/diskio.cpp"
-
-#define isBacklightEnabled() (PWM->PWM_CH_NUM[0].PWM_CDTY != 100)
-
-//uint8_t pxxFlag = 0;
-int16_t g_anas[7];
-
-uint16_t anaIn(uint8_t chan)
-{
-  if (chan == 7)
-    return 1500;
-  else
-    return g_anas[chan];
-}
-
-bool hasExtendedTrims()
-{
-  return false;
-}
-
-void setTrim(uint8_t idx, int8_t value)
-{
-  g_model.trim[idx] = value;
-}
-
-void getTrims(int16_t values[4])
-{
-  for (int i=0; i<4; i++)
-    values[i] = g_model.trim[i];
-}
-
-#define SWITCH_CASE(swtch, pin, mask) \
-    case swtch: \
-      if (state) pin |= (mask); else pin &= ~(mask); \
-      break;
-#define SWITCH_3_CASE(swtch, pin1, pin2, mask1, mask2) \
-    case swtch: \
-      if (state < 0) pin1 &= ~(mask1); else pin1 |= (mask1); \
-      if (state > 0) pin2 &= ~(mask2); else pin2 |= (mask2); \
-      break;
-
-void simuSetSwitch(uint8_t swtch, int8_t state)
-{
-  // printf("swtch=%d state=%d\n", swtch, state); fflush(stdout);
-  switch (swtch) {
-    SWITCH_CASE(0, PIOC->PIO_PDSR, 1<<20)
-    SWITCH_CASE(1, PIOA->PIO_PDSR, 1<<15)
-    SWITCH_CASE(2, PIOC->PIO_PDSR, 1<<31)
-    SWITCH_3_CASE(3, PIOC->PIO_PDSR, PIOC->PIO_PDSR, 0x00004000, 0x00000800)
-    SWITCH_CASE(4, PIOA->PIO_PDSR, 1<<2)
-    SWITCH_CASE(5, PIOC->PIO_PDSR, 1<<16)
-    SWITCH_CASE(6, PIOC->PIO_PDSR, 1<<8)
-
-    default:
-      break;
-  }
-}
-
-#define KEYS_GPIO_REG_MENU                PIOB->PIO_PDSR
-#define KEYS_GPIO_REG_EXIT                PIOC->PIO_PDSR
-#define KEYS_GPIO_REG_UP                  PIOC->PIO_PDSR
-#define KEYS_GPIO_REG_DOWN                PIOC->PIO_PDSR
-#define KEYS_GPIO_REG_RIGHT               PIOC->PIO_PDSR
-#define KEYS_GPIO_REG_LEFT                PIOC->PIO_PDSR
-#define KEYS_GPIO_PIN_MENU                 0x00000020
-#define KEYS_GPIO_PIN_EXIT                 0x01000000
-#define KEYS_GPIO_PIN_UP                   0x00000002
-#define KEYS_GPIO_PIN_DOWN                 0x00000020
-#define KEYS_GPIO_PIN_RIGHT                0x00000010
-#define KEYS_GPIO_PIN_LEFT                 0x00000008
-
-#define KEY_CASE(key, pin, mask) \
-    case key: \
-      if (state) pin &= ~mask; else pin |= mask;\
-      break;
-
-void simuSetKey(uint8_t key, bool state)
-{
-  switch (key) {
-    KEY_CASE(KEY_MENU, KEYS_GPIO_REG_MENU, KEYS_GPIO_PIN_MENU)
-    KEY_CASE(KEY_EXIT, KEYS_GPIO_REG_EXIT, KEYS_GPIO_PIN_EXIT)
-    KEY_CASE(KEY_RIGHT, KEYS_GPIO_REG_RIGHT, KEYS_GPIO_PIN_RIGHT)
-    KEY_CASE(KEY_LEFT, KEYS_GPIO_REG_LEFT, KEYS_GPIO_PIN_LEFT)
-    KEY_CASE(KEY_UP, KEYS_GPIO_REG_UP, KEYS_GPIO_PIN_UP)
-    KEY_CASE(KEY_DOWN, KEYS_GPIO_REG_DOWN, KEYS_GPIO_PIN_DOWN)
-  }
-}
-
-#define TRIMS_GPIO_REG_LHL                  PIOA->PIO_PDSR
-#define TRIMS_GPIO_REG_LVD                 PIOA->PIO_PDSR
-#define TRIMS_GPIO_REG_RVU                 PIOA->PIO_PDSR
-#define TRIMS_GPIO_REG_RHL                  PIOA->PIO_PDSR
-#define TRIMS_GPIO_REG_LHR                  PIOB->PIO_PDSR
-#define TRIMS_GPIO_REG_LVU                 PIOC->PIO_PDSR
-#define TRIMS_GPIO_REG_RVD                 PIOC->PIO_PDSR
-#define TRIMS_GPIO_REG_RHR                  PIOC->PIO_PDSR
-#define PIN_TRIM_LH_L                   0x00800000
-#define PIN_TRIM_LV_DN                  0x01000000
-#define PIN_TRIM_RV_UP                  0x00000002
-#define PIN_TRIM_RH_L                   0x00000001
-#define PIN_TRIM_LH_R                   0x00000010
-#define PIN_TRIM_LV_UP                  0x10000000
-#define PIN_TRIM_RV_DN                  0x00000400
-#define PIN_TRIM_RH_R                   0x00000200
-
-#define TRIM_CASE KEY_CASE
-
-void simuSetTrim(uint8_t trim, bool state)
-{
-  switch (trim) {
-    TRIM_CASE(0, TRIMS_GPIO_REG_LHL, PIN_TRIM_LH_L)
-    TRIM_CASE(1, TRIMS_GPIO_REG_LHR, PIN_TRIM_LH_R)
-    TRIM_CASE(2, TRIMS_GPIO_REG_LVD, PIN_TRIM_LV_DN)
-    TRIM_CASE(3, TRIMS_GPIO_REG_LVU, PIN_TRIM_LV_UP)
-    TRIM_CASE(4, TRIMS_GPIO_REG_RVD, PIN_TRIM_RV_DN)
-    TRIM_CASE(5, TRIMS_GPIO_REG_RVU, PIN_TRIM_RV_UP)
-    TRIM_CASE(6, TRIMS_GPIO_REG_RHL, PIN_TRIM_RH_L)
-    TRIM_CASE(7, TRIMS_GPIO_REG_RHR, PIN_TRIM_RH_R)
-  }
-}
-
-}
-
-using namespace Ersky9x;
-
-Ersky9xSimulator::Ersky9xSimulator(Ersky9xInterface * ersky9xInterface):
-  ersky9xInterface(ersky9xInterface)
-{
-}
-
-bool Ersky9xSimulator::timer10ms()
-{
-#define TIMER10MS_IMPORT
-#include "simulatorimport.h"
-}
-
-uint8_t * Ersky9xSimulator::getLcd()
-{
-  return (::uint8_t *)simuLcdBuf;
-}
-
-bool Ersky9xSimulator::lcdChanged(bool & lightEnable)
-{
-#define LCDCHANGED_IMPORT
-#include "simulatorimport.h"
-}
-
-void Ersky9xSimulator::start(RadioData &radioData, bool tests)
-{
-  ersky9xInterface->save(Ersky9x::eeprom, radioData);
-  StartEepromThread(NULL);
-  StartMainThread(tests);
-}
-
-void Ersky9xSimulator::stop()
-{
-  StopMainThread();
-  StopEepromThread();
-}
-
-void Ersky9xSimulator::getValues(TxOutputs &outputs)
-{
-#define GETVALUES_IMPORT
-#include "simulatorimport.h"
-}
-
-void Ersky9xSimulator::setValues(TxInputs &inputs)
-{
-#define SETVALUES_IMPORT
-#include "simulatorimport.h"
-}
-
-void Ersky9xSimulator::setTrim(unsigned int idx, int value)
-{
-  Ersky9x::setTrim(idx, value);
-}
-
-void Ersky9xSimulator::getTrims(Trims & trims)
-{
-  trims.extended = false;
-  Ersky9x::getTrims(trims.values);
-}
-
-const char * Ersky9xSimulator::getError()
-{
-#define GETERROR_IMPORT
-#include "simulatorimport.h"
-}

companion/src/firmwares/ersky9x/simulator/ersky9xsimulator.h

@@ -1,70 +0,0 @@
-/*
- * Author - Bertrand Songis <bsongis@gmail.com>
- * 
- * Based on th9x -> http://code.google.com/p/th9x/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef ersky9x_simulator_h
-#define ersky9x_simulator_h
-
-#include "simulatorinterface.h"
-
-class RadioData;
-class Ersky9xInterface;
-
-class Ersky9xSimulator : public SimulatorInterface {
-
-  public:
-
-    Ersky9xSimulator(Ersky9xInterface *);
-
-    virtual void start(RadioData & radioData, bool tests);
-
-    virtual void stop();
-
-    virtual bool timer10ms();
-
-    virtual uint8_t * getLcd();
-
-    virtual bool lcdChanged(bool & lightEnable);
-
-    virtual void setValues(TxInputs &inputs);
-
-    virtual void getValues(TxOutputs &outputs);
-
-    virtual void setTrim(unsigned int idx, int value);
-
-    virtual void getTrims(Trims & trims);
-
-    virtual unsigned int getPhase() { return 0; }
-
-    virtual const char * getPhaseName(unsigned int phase) { return 0; }
-
-    virtual const char * getError();
-
-    virtual void sendTelemetry(uint8_t * data, unsigned int len) {};
-
-    virtual uint8_t getSensorInstance(uint16_t id, uint8_t defaultValue = 0) { return 0; };
-
-    virtual uint16_t getSensorRatio(uint16_t id) { return 0; };
-
-    virtual void setTrainerInput(unsigned int inputNumber, int16_t value) {};
-
-    virtual void setLuaStateReloadPermanentScripts() {};
-
-  protected:
-
-    Ersky9xInterface * ersky9xInterface;
-};
-
-#endif

companion/src/firmwares/generalsettings.cpp

@@ -0,0 +1,353 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "generalsettings.h"
+
+#include "appdata.h"
+#include "eeprominterface.h"
+#include "radiodataconversionstate.h"
+
+const uint8_t chout_ar[] = { // First number is 0..23 -> template setup,  Second is relevant channel out
+  1,2,3,4 , 1,2,4,3 , 1,3,2,4 , 1,3,4,2 , 1,4,2,3 , 1,4,3,2,
+  2,1,3,4 , 2,1,4,3 , 2,3,1,4 , 2,3,4,1 , 2,4,1,3 , 2,4,3,1,
+  3,1,2,4 , 3,1,4,2 , 3,2,1,4 , 3,2,4,1 , 3,4,1,2 , 3,4,2,1,
+  4,1,2,3 , 4,1,3,2 , 4,2,1,3 , 4,2,3,1 , 4,3,1,2 , 4,3,2,1
+};
+
+bool GeneralSettings::switchPositionAllowedTaranis(int index) const
+{
+  if (index == 0)
+    return true;
+
+  div_t qr = div(abs(index)-1, 3);
+
+  if (index < 0 && switchConfig[qr.quot] != Board::SWITCH_3POS)
+    return false;
+  else if (qr.rem == 1)
+    return switchConfig[qr.quot] == Board::SWITCH_3POS;
+  else
+    return switchConfig[qr.quot] != Board::SWITCH_NOT_AVAILABLE;
+}
+
+bool GeneralSettings::switchSourceAllowedTaranis(int index) const
+{
+  return switchConfig[index] != Board::SWITCH_NOT_AVAILABLE;
+}
+
+bool GeneralSettings::isPotAvailable(int index) const
+{
+  if (index<0 || index>getBoardCapability(getCurrentBoard(), Board::Pots)) return false;
+  return potConfig[index] != Board::POT_NONE;
+}
+
+bool GeneralSettings::isSliderAvailable(int index) const
+{
+  if (index<0 || index>getBoardCapability(getCurrentBoard(), Board::Sliders)) return false;
+  return sliderConfig[index] != Board::SLIDER_NONE;
+}
+
+GeneralSettings::GeneralSettings()
+{
+  memset(this, 0, sizeof(GeneralSettings));
+
+  contrast  = 25;
+
+  for (int i=0; i < CPN_MAX_ANALOGS; ++i) {
+    calibMid[i]     = 0x200;
+    calibSpanNeg[i] = 0x180;
+    calibSpanPos[i] = 0x180;
+  }
+
+  Firmware * firmware = Firmware::getCurrentVariant();
+  Board::Type board = firmware->getBoard();
+
+  // vBatWarn is voltage in 100mV, vBatMin is in 100mV but with -9V offset, vBatMax has a -12V offset
+  vBatWarn  = 90;
+  if (IS_TARANIS_X9E(board) || IS_HORUS_X12S(board)) {
+    // NI-MH 9.6V
+    vBatWarn = 87;
+    vBatMin = -5;   //8,5V
+    vBatMax = -5;   //11,5V
+  }
+  else if (IS_TARANIS_XLITE(board) || IS_HORUS_X10(board)) {
+    // Lipo 2S
+    vBatWarn = 66;
+    vBatMin = -23;  // 6.7V
+    vBatMax = -37;  // 8.3V 
+  }
+  else if (IS_TARANIS(board)) {
+    // NI-MH 7.2V, X9D, X9D+ and X7
+    vBatWarn = 65;
+    vBatMin = -30; //6V
+    vBatMax = -40; //8V
+  }
+
+  setDefaultControlTypes(board);
+
+  backlightMode = 3; // keys and sticks
+  // backlightBright = 0; // 0 = 100%
+
+  if (IS_HORUS(board)) {
+    backlightOffBright = 20;
+  }
+
+  if (IS_ARM(board)) {
+    speakerVolume = 12;
+  }
+
+  if (IS_HORUS(board)) {
+    strcpy(bluetoothName, "Horus");
+  }
+  else if (IS_TARANIS_X9E(board) || IS_TARANIS_SMALL(board)) {
+    strcpy(bluetoothName, "Taranis");
+  }
+
+  templateSetup = g.profile[g.sessionId()].channelOrder();
+  stickMode = g.profile[g.sessionId()].defaultMode();
+
+  QString t_calib = g.profile[g.sessionId()].stickPotCalib();
+  int potsnum = getBoardCapability(getCurrentBoard(), Board::Pots);
+  if (!t_calib.isEmpty()) {
+    QString t_trainercalib=g.profile[g.sessionId()].trainerCalib();
+    int8_t t_txVoltageCalibration=(int8_t)g.profile[g.sessionId()].txVoltageCalibration();
+    int8_t t_txCurrentCalibration=(int8_t)g.profile[g.sessionId()].txCurrentCalibration();
+    int8_t t_PPM_Multiplier=(int8_t)g.profile[g.sessionId()].ppmMultiplier();
+    uint8_t t_stickMode=(uint8_t)g.profile[g.sessionId()].gsStickMode();
+    uint8_t t_vBatWarn=(uint8_t)g.profile[g.sessionId()].vBatWarn();
+    QString t_DisplaySet=g.profile[g.sessionId()].display();
+    QString t_BeeperSet=g.profile[g.sessionId()].beeper();
+    QString t_HapticSet=g.profile[g.sessionId()].haptic();
+    QString t_SpeakerSet=g.profile[g.sessionId()].speaker();
+    QString t_CountrySet=g.profile[g.sessionId()].countryCode();
+
+    if ((t_calib.length()==(CPN_MAX_STICKS+potsnum)*12) && (t_trainercalib.length()==16)) {
+      QString Byte;
+      int16_t byte16;
+      bool ok;
+      for (int i=0; i<(CPN_MAX_STICKS+potsnum); i++) {
+        Byte=t_calib.mid(i*12,4);
+        byte16=(int16_t)Byte.toInt(&ok,16);
+        if (ok)
+          calibMid[i]=byte16;
+        Byte=t_calib.mid(4+i*12,4);
+        byte16=(int16_t)Byte.toInt(&ok,16);
+        if (ok)
+          calibSpanNeg[i]=byte16;
+        Byte=t_calib.mid(8+i*12,4);
+        byte16=(int16_t)Byte.toInt(&ok,16);
+        if (ok)
+          calibSpanPos[i]=byte16;
+      }
+      for (int i=0; i<4; i++) {
+        Byte=t_trainercalib.mid(i*4,4);
+        byte16=(int16_t)Byte.toInt(&ok,16);
+        if (ok)
+          trainer.calib[i]=byte16;
+      }
+      txCurrentCalibration=t_txCurrentCalibration;
+      txVoltageCalibration=t_txVoltageCalibration;
+      vBatWarn=t_vBatWarn;
+      PPM_Multiplier=t_PPM_Multiplier;
+      stickMode = t_stickMode;
+    }
+    if ((t_DisplaySet.length()==6) && (t_BeeperSet.length()==4) && (t_HapticSet.length()==6) && (t_SpeakerSet.length()==6)) {
+      uint8_t byte8u;
+      int8_t byte8;
+      bool ok;
+      byte8=(int8_t)t_DisplaySet.mid(0,2).toInt(&ok,16);
+      if (ok)
+        optrexDisplay=(byte8==1 ? true : false);
+      byte8u=(uint8_t)t_DisplaySet.mid(2,2).toUInt(&ok,16);
+      if (ok)
+        contrast=byte8u;
+      byte8u=(uint8_t)t_DisplaySet.mid(4,2).toUInt(&ok,16);
+      if (ok)
+        backlightBright=byte8u;
+      byte8=(int8_t)t_BeeperSet.mid(0,2).toUInt(&ok,16);
+      if (ok)
+        beeperMode=(BeeperMode)byte8;
+      byte8=(int8_t)t_BeeperSet.mid(2,2).toInt(&ok,16);
+      if (ok)
+        beeperLength=byte8;
+      byte8=(int8_t)t_HapticSet.mid(0,2).toUInt(&ok,16);
+      if (ok)
+        hapticMode=(BeeperMode)byte8;
+      byte8=(int8_t)t_HapticSet.mid(2,2).toInt(&ok,16);
+      if (ok)
+        hapticStrength=byte8;
+      byte8=(int8_t)t_HapticSet.mid(4,2).toInt(&ok,16);
+      if (ok)
+        hapticLength=byte8;
+      byte8u=(uint8_t)t_SpeakerSet.mid(0,2).toUInt(&ok,16);
+      if (ok)
+        speakerMode=byte8u;
+      byte8u=(uint8_t)t_SpeakerSet.mid(2,2).toUInt(&ok,16);
+      if (ok)
+        speakerPitch=byte8u;
+      byte8u=(uint8_t)t_SpeakerSet.mid(4,2).toUInt(&ok,16);
+      if (ok)
+        speakerVolume=byte8u;
+      if (t_CountrySet.length()==6) {
+        byte8u=(uint8_t)t_CountrySet.mid(0,2).toUInt(&ok,16);
+        if (ok)
+          countryCode=byte8u;
+        byte8u=(uint8_t)t_CountrySet.mid(2,2).toUInt(&ok,16);
+        if (ok)
+          imperial=byte8u;
+        QString chars = t_CountrySet.mid(4, 2);
+        ttsLanguage[0] = chars[0].toLatin1();
+        ttsLanguage[1] = chars[1].toLatin1();
+      }
+    }
+  }
+
+  strcpy(themeName, "default");
+  ThemeOptionData option1 = { 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0 };
+  memcpy(&themeOptionValue[0], option1, sizeof(ThemeOptionData));
+  ThemeOptionData option2 = { 0x03, 0xe1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0 };
+  memcpy(&themeOptionValue[1], option2, sizeof(ThemeOptionData));
+}
+
+void GeneralSettings::setDefaultControlTypes(Board::Type board)
+{
+  for (int i=0; i<getBoardCapability(board, Board::FactoryInstalledSwitches); i++) {
+    switchConfig[i] = Boards::getSwitchInfo(board, i).config;
+  }
+
+  // TODO: move to Boards, like with switches
+  if (IS_HORUS(board)) {
+    potConfig[0] = Board::POT_WITH_DETENT;
+    potConfig[1] = Board::POT_MULTIPOS_SWITCH;
+    potConfig[2] = Board::POT_WITH_DETENT;
+  }
+  else if (IS_TARANIS_XLITE(board)) {
+    potConfig[0] = Board::POT_WITHOUT_DETENT;
+    potConfig[1] = Board::POT_WITHOUT_DETENT;
+  }
+  else if (IS_TARANIS_X7(board)) {
+    potConfig[0] = Board::POT_WITHOUT_DETENT;
+    potConfig[1] = Board::POT_WITH_DETENT;
+  }
+  else if (IS_TARANIS(board)) {
+    potConfig[0] = Board::POT_WITH_DETENT;
+    potConfig[1] = Board::POT_WITH_DETENT;
+  }
+  else {
+    potConfig[0] = Board::POT_WITHOUT_DETENT;
+    potConfig[1] = Board::POT_WITHOUT_DETENT;
+    potConfig[2] = Board::POT_WITHOUT_DETENT;
+  }
+
+  if (IS_HORUS_X12S(board) || IS_TARANIS_X9E(board)) {
+    sliderConfig[0] = Board::SLIDER_WITH_DETENT;
+    sliderConfig[1] = Board::SLIDER_WITH_DETENT;
+    sliderConfig[2] = Board::SLIDER_WITH_DETENT;
+    sliderConfig[3] = Board::SLIDER_WITH_DETENT;
+  }
+  else if (IS_TARANIS_X9(board) || IS_HORUS_X10(board)) {
+    sliderConfig[0] = Board::SLIDER_WITH_DETENT;
+    sliderConfig[1] = Board::SLIDER_WITH_DETENT;
+  }
+}
+
+int GeneralSettings::getDefaultStick(unsigned int channel) const
+{
+  if (channel >= CPN_MAX_STICKS)
+    return -1;
+  else
+    return chout_ar[4*templateSetup + channel] - 1;
+}
+
+RawSource GeneralSettings::getDefaultSource(unsigned int channel) const
+{
+  int stick = getDefaultStick(channel);
+  if (stick >= 0)
+    return RawSource(SOURCE_TYPE_STICK, stick);
+  else
+    return RawSource(SOURCE_TYPE_NONE);
+}
+
+int GeneralSettings::getDefaultChannel(unsigned int stick) const
+{
+  for (int i=0; i<4; i++){
+    if (getDefaultStick(i) == (int)stick)
+      return i;
+  }
+  return -1;
+}
+
+void GeneralSettings::convert(RadioDataConversionState & cstate)
+{
+  // Here we can add explicit conversions when moving from one board to another
+
+  cstate.setOrigin(tr("Radio Settings"));
+
+  setDefaultControlTypes(cstate.toType);  // start with default switches/pots/sliders
+
+  // Try to intelligently copy any custom control names
+
+  // SE and SG are skipped on X7 board
+  if (IS_TARANIS_X7(cstate.toType)) {
+    if (IS_TARANIS_X9(cstate.fromType) || IS_HORUS(cstate.fromType)) {
+      strncpy(switchName[4], switchName[5], sizeof(switchName[4]));
+      strncpy(switchName[5], switchName[7], sizeof(switchName[5]));
+    }
+  }
+  else if (IS_TARANIS_X7(cstate.fromType)) {
+    if (IS_TARANIS_X9(cstate.toType) || IS_HORUS(cstate.toType)) {
+      strncpy(switchName[5], switchName[4], sizeof(switchName[5]));
+      strncpy(switchName[7], switchName[5], sizeof(switchName[7]));
+    }
+  }
+
+  // LS and RS sliders are after 2 aux sliders on X12 and X9E
+  if ((IS_HORUS_X12S(cstate.toType) || IS_TARANIS_X9E(cstate.toType)) && !IS_HORUS_X12S(cstate.fromType) && !IS_TARANIS_X9E(cstate.fromType)) {
+    strncpy(sliderName[0], sliderName[2], sizeof(sliderName[0]));
+    strncpy(sliderName[1], sliderName[3], sizeof(sliderName[1]));
+  }
+  else if (!IS_TARANIS_X9E(cstate.toType) && !IS_HORUS_X12S(cstate.toType) && (IS_HORUS_X12S(cstate.fromType) || IS_TARANIS_X9E(cstate.fromType))) {
+    strncpy(sliderName[2], sliderName[0], sizeof(sliderName[2]));
+    strncpy(sliderName[3], sliderName[1], sizeof(sliderName[3]));
+  }
+
+  if (IS_HORUS(cstate.toType)) {
+    // 6P switch is only on Horus (by default)
+    if (cstate.fromBoard.getCapability(Board::FactoryInstalledPots) == 2) {
+      strncpy(potName[2], potName[1], sizeof(potName[2]));
+      potName[1][0] = '\0';
+    }
+  }
+
+  if (IS_TARANIS(cstate.toType)) {
+    // No S3 pot on Taranis boards by default
+    if (cstate.fromBoard.getCapability(Board::FactoryInstalledPots) > 2)
+      strncpy(potName[1], potName[2], sizeof(potName[1]));
+
+    contrast = qBound<int>(getCurrentFirmware()->getCapability(MinContrast), contrast, getCurrentFirmware()->getCapability(MaxContrast));
+  }
+
+  // TODO: Would be nice at this point to have GUI pause and ask the user to set up any custom hardware they have on the destination radio.
+
+  // Convert all global functions (do this after HW adjustments)
+  for (int i=0; i<CPN_MAX_SPECIAL_FUNCTIONS; i++) {
+    customFn[i].convert(cstate.withComponentIndex(i));
+  }
+
+}

companion/src/firmwares/generalsettings.h

@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef GENERALSETTINGS_H
+#define GENERALSETTINGS_H
+
+#include "boards.h"
+#include "constants.h"
+#include "customfunctiondata.h"
+#include "rawsource.h"
+
+#include <QtCore>
+
+class Firmware;
+class ModelData;
+class GeneralSettings;
+class RadioDataConversionState;
+
+enum UartModes {
+  UART_MODE_NONE,
+  UART_MODE_TELEMETRY_MIRROR,
+  UART_MODE_TELEMETRY,
+  UART_MODE_SBUS_TRAINER,
+  UART_MODE_DEBUG
+};
+
+class TrainerMix {
+  public:
+    TrainerMix() { clear(); }
+    unsigned int src; // 0-7 = ch1-8
+    RawSwitch swtch;
+    int weight;
+    unsigned int mode;   // off, add-mode, subst-mode
+    void clear() { memset(reinterpret_cast<void *>(this), 0, sizeof(TrainerMix)); }
+};
+
+class TrainerData {
+  public:
+    TrainerData() { clear(); }
+    int         calib[4];
+    TrainerMix  mix[4];
+    void clear() { memset(reinterpret_cast<void *>(this), 0, sizeof(TrainerData)); }
+};
+
+class GeneralSettings {
+  Q_DECLARE_TR_FUNCTIONS(GeneralSettings)
+
+  public:
+
+    enum BeeperMode {
+      BEEPER_QUIET = -2,
+      BEEPER_ALARMS_ONLY = -1,
+      BEEPER_NOKEYS = 0,
+      BEEPER_ALL = 1
+    };
+
+    GeneralSettings();
+    void convert(RadioDataConversionState & cstate);
+
+    void setDefaultControlTypes(Board::Type board);
+    int getDefaultStick(unsigned int channel) const;
+    RawSource getDefaultSource(unsigned int channel) const;
+    int getDefaultChannel(unsigned int stick) const;
+
+    unsigned int version;
+    unsigned int variant;
+    int   calibMid[CPN_MAX_ANALOGS];
+    int   calibSpanNeg[CPN_MAX_ANALOGS];
+    int   calibSpanPos[CPN_MAX_ANALOGS];
+    unsigned int  currModelIndex;
+    char currModelFilename[16+1];
+    unsigned int   contrast;
+    unsigned int   vBatWarn;
+    int    txVoltageCalibration;
+    int    txCurrentCalibration;
+    int    vBatMin;
+    int    vBatMax;
+    int   backlightMode;
+    TrainerData trainer;
+    unsigned int   view;    // main screen view // TODO enum
+    bool      disableThrottleWarning;
+    bool      fai;
+    bool      disableMemoryWarning;
+    BeeperMode beeperMode;
+    bool      disableAlarmWarning;
+    bool      disableRssiPoweroffAlarm;
+    unsigned int       usbMode;
+    BeeperMode hapticMode;
+    unsigned int   stickMode; // TODO enum
+    int       timezone;
+    bool      adjustRTC;
+    bool      optrexDisplay;
+    unsigned int    inactivityTimer;
+    bool      minuteBeep;
+    bool      preBeep;
+    bool      flashBeep;
+    unsigned int  splashMode;
+    int splashDuration;
+    unsigned int  backlightDelay;
+    unsigned int   templateSetup;  //RETA order according to chout_ar array
+    int    PPM_Multiplier;
+    int    hapticLength;
+    unsigned int   reNavigation;
+    unsigned int stickReverse;
+    unsigned int   speakerPitch;
+    int   hapticStrength;
+    unsigned int   speakerMode;
+    char      ownerName[10+1];
+    int    beeperLength;
+    unsigned int    gpsFormat;
+    int     speakerVolume;
+    unsigned int   backlightBright;
+    unsigned int   backlightOffBright;
+    int switchesDelay;
+    int    temperatureCalib;
+    int    temperatureWarn;
+    unsigned int mAhWarn;
+    unsigned int mAhUsed;
+    unsigned int globalTimer;
+    char bluetoothName[10+1];
+    unsigned int bluetoothBaudrate;
+    unsigned int bluetoothMode;
+    unsigned int sticksGain;
+    unsigned int rotarySteps;
+    unsigned int countryCode;
+    bool jitterFilter;
+    unsigned int imperial;
+    char ttsLanguage[2+1];
+    int beepVolume;
+    int wavVolume;
+    int varioVolume;
+    int varioPitch;
+    int varioRange;
+    int varioRepeat;
+    int backgroundVolume;
+    unsigned int mavbaud;
+    unsigned int switchUnlockStates;
+    unsigned int hw_uartMode;  // UartModes
+    unsigned int backlightColor;
+    CustomFunctionData customFn[CPN_MAX_SPECIAL_FUNCTIONS];
+    char switchName[CPN_MAX_SWITCHES][3+1];
+    unsigned int switchConfig[CPN_MAX_SWITCHES];
+    char stickName[CPN_MAX_STICKS][3+1];
+    char potName[CPN_MAX_KNOBS][3+1];
+    unsigned int potConfig[CPN_MAX_KNOBS];
+    char sliderName[CPN_MAX_SLIDERS][3+1];
+    unsigned int sliderConfig[CPN_MAX_SLIDERS];
+
+    char themeName[8+1];
+    typedef uint8_t ThemeOptionData[8+1];
+    ThemeOptionData themeOptionValue[5];
+
+    bool switchPositionAllowedTaranis(int index) const;
+    bool switchSourceAllowedTaranis(int index) const;
+    bool isPotAvailable(int index) const;
+    bool isSliderAvailable(int index) const;
+};
+
+
+#endif // GENERALSETTINGS_H

companion/src/firmwares/gruvin9x/gruvin9xeeprom.cpp

@@ -1,729 +0,0 @@
-#include <stdlib.h>
-#include <algorithm>
-#include "helpers.h"
-#include "gruvin9xeeprom.h"
-#include <QObject>
-
-#define EEPROM_VER       106
-
-extern void getEEPROMZString(char *dst, const char *src, int size);
-
-RawSwitch gruvin9xToSwitch(int8_t sw)
-{
-  if (sw == 0)
-    return RawSwitch(SWITCH_TYPE_NONE);
-  else if (sw <= 9)
-    return RawSwitch(SWITCH_TYPE_SWITCH, sw);
-  else
-    return RawSwitch(SWITCH_TYPE_VIRTUAL, sw > 0 ? sw-9 : sw+9);
-}
-
-t_Gruvin9xTrainerMix_v103::operator TrainerMix()
-{
-  TrainerMix c9x;
-  c9x.src = srcChn;
-  c9x.swtch = gruvin9xToSwitch(swtch);
-  c9x.weight = (25 * studWeight) / 8;
-  c9x.mode = mode;
-  return c9x;
-}
-
-t_Gruvin9xTrainerMix_v104::operator TrainerMix()
-{
-  TrainerMix c9x;
-  c9x.src = srcChn;
-  c9x.weight = studWeight;
-  c9x.mode = mode;
-  return c9x;
-}
-
-t_Gruvin9xTrainerData_v103::operator TrainerData ()
-{
-  TrainerData c9x;
-  for (int i=0; i<NUM_STICKS; i++) {
-    c9x.calib[i] = calib[i];
-    c9x.mix[i] = mix[i];
-  }
-  return c9x;
-}
-
-t_Gruvin9xTrainerData_v104::operator TrainerData ()
-{
-  TrainerData c9x;
-  for (int i=0; i<NUM_STICKS; i++) {
-    c9x.calib[i] = calib[i];
-    c9x.mix[i] = mix[i];
-  }
-  return c9x;
-}
-
-Gruvin9xGeneral_v103::operator GeneralSettings ()
-{
-  GeneralSettings result;
-
-  for (int i=0; i<NUM_STICKS+BOARD_9X_NUM_POTS; i++) {
-    result.calibMid[i] = calibMid[i];
-    result.calibSpanNeg[i] = calibSpanNeg[i];
-    result.calibSpanPos[i] = calibSpanPos[i];
-  }
-
-  result.currModel = currModel;
-  result.contrast = contrast;
-  result.vBatWarn = vBatWarn;
-  result.txVoltageCalibration = txVoltageCalibration;
-
-  result.backlightMode = 0;
-  if (lightSw == 22) {
-    result.backlightMode = 4;
-  }
-  else if (lightAutoOff) {
-    result.backlightMode |= 1;
-    result.backlightDelay = lightAutoOff;
-  }
-
-  result.trainer = trainer;
-  result.view = view;
-  result.disableThrottleWarning = disableThrottleWarning;
-  result.switchWarning = switchWarning;
-
-  switch (beeperVal) {
-    case 0:
-      result.beeperMode = GeneralSettings::BEEPER_QUIET;
-      break;
-    case 1:
-      result.beeperMode = GeneralSettings::BEEPER_NOKEYS;
-      break;
-    default:
-      result.beeperMode = GeneralSettings::BEEPER_ALL;
-      result.beeperLength = beeperVal - 4;
-      break;
-  }
-
-  result.disableMemoryWarning = disableMemoryWarning;
-  result.disableAlarmWarning = disableAlarmWarning;
-  result.stickMode = stickMode;
-  result.inactivityTimer = inactivityTimer;
-  result.minuteBeep = minuteBeep;
-  result.preBeep = preBeep;
-  result.flashBeep = flashBeep;
-  result.splashMode = disableSplashScreen;
-  result.enableTelemetryAlarm = enableTelemetryAlarm;
-  result.templateSetup = templateSetup;
-  result.PPM_Multiplier = PPM_Multiplier;
-  // TODO frskyRssiAlarms[2];
-  return result;
-}
-
-Gruvin9xGeneral_v104::operator GeneralSettings ()
-{
-  GeneralSettings result;
-
-  for (int i=0; i<NUM_STICKS+BOARD_9X_NUM_POTS; i++) {
-    result.calibMid[i] = calibMid[i];
-    result.calibSpanNeg[i] = calibSpanNeg[i];
-    result.calibSpanPos[i] = calibSpanPos[i];
-  }
-
-  result.currModel = currModel;
-  result.contrast = contrast;
-  result.vBatWarn = vBatWarn;
-  result.txVoltageCalibration = txVoltageCalibration;
-
-  result.backlightMode = 0;
-  if (lightSw == 22) {
-    result.backlightMode = 4;
-  }
-  else if (lightAutoOff) {
-    result.backlightMode |= 1;
-    result.backlightDelay = lightAutoOff;
-  }
-
-  result.trainer = trainer;
-  result.view = view;
-  result.disableThrottleWarning = disableThrottleWarning;
-  result.switchWarning = switchWarning;
-  result.beeperMode = (GeneralSettings::BeeperMode)beeperVal;
-  result.disableMemoryWarning = disableMemoryWarning;
-  result.disableAlarmWarning = disableAlarmWarning;
-  result.stickMode = stickMode;
-  result.inactivityTimer = inactivityTimer;
-  result.minuteBeep = minuteBeep;
-  result.preBeep = preBeep;
-  result.flashBeep = flashBeep;
-  result.splashMode = disableSplashScreen;
-  result.enableTelemetryAlarm = enableTelemetryAlarm;
-  result.templateSetup = templateSetup;
-  result.PPM_Multiplier = PPM_Multiplier;
-  // TODO frskyRssiAlarms[2];
-  return result;
-}
-
-t_Gruvin9xExpoData::t_Gruvin9xExpoData()
-{
-  memset(this, 0, sizeof(t_Gruvin9xExpoData));
-}
-
-t_Gruvin9xExpoData::operator ExpoData ()
-{
-  ExpoData c9x;
-  c9x.mode = mode;
-  c9x.chn = chn;
-  c9x.swtch = gruvin9xToSwitch(swtch);
-  if (negPhase) {
-    c9x.flightModes= 1 << (phase -1);
-  } else if (phase==0) {
-    c9x.flightModes=0;
-  } else {
-    c9x.flightModes=63;
-    c9x.flightModes &= ~(1 << (phase -1));
-  }  
-  c9x.weight = weight;
-  if (expo) {
-    c9x.curve.type = CurveReference::CURVE_REF_EXPO;
-    c9x.curve.value = expo;
-  }
-  else if (curve > 6) {
-    c9x.curve.type = CurveReference::CURVE_REF_CUSTOM;
-    c9x.curve.value = curve - 6;
-  }
-  else if (curve > 0) {
-    c9x.curve.type = CurveReference::CURVE_REF_FUNC;
-    c9x.curve.value = curve;
-  }
-  return c9x;
-}
-
-t_Gruvin9xLimitData::t_Gruvin9xLimitData()
-{
-  memset(this, 0, sizeof(t_Gruvin9xLimitData));
-}
-
-t_Gruvin9xLimitData::operator LimitData ()
-{
-  LimitData c9x;
-  c9x.min = 10*(min-100);
-  c9x.max = 10*(max+100);
-  c9x.revert = revert;
-  c9x.offset = offset;
-  return c9x;
-}
-
-t_Gruvin9xMixData::t_Gruvin9xMixData()
-{
-  memset(this, 0, sizeof(t_Gruvin9xMixData));
-}
-
-t_Gruvin9xMixData::operator MixData ()
-{
-  MixData c9x;
-  c9x.destCh = destCh;
-  c9x.weight = weight;
-  c9x.swtch = gruvin9xToSwitch(swtch);
-
-  if (srcRaw == 0) {
-    c9x.srcRaw = RawSource(SOURCE_TYPE_NONE);
-  }
-  else if (srcRaw <= 7) {
-    c9x.srcRaw = RawSource(SOURCE_TYPE_STICK, srcRaw-1);
-  }
-  else if (srcRaw == 8) {
-    c9x.srcRaw = RawSource(SOURCE_TYPE_MAX);
-  }
-  else if (srcRaw == 9) {
-    if (swtch < 0) {
-      c9x.srcRaw = RawSource(SOURCE_TYPE_SWITCH, -swtch - 1);
-      c9x.weight = -weight;
-    }
-    else {
-      c9x.srcRaw = RawSource(SOURCE_TYPE_SWITCH, swtch - 1);
-    }
-    if (mltpx != MLTPX_REP)
-      c9x.swtch = RawSwitch(SWITCH_TYPE_NONE);
-  }
-  else if (srcRaw <= 12) {
-    c9x.srcRaw = RawSource(SOURCE_TYPE_CYC, srcRaw-10);
-  }
-  else if (srcRaw <= 20) {
-    c9x.srcRaw = RawSource(SOURCE_TYPE_PPM, srcRaw-13);
-  }
-  else {
-    c9x.srcRaw = RawSource(SOURCE_TYPE_CH, srcRaw-21);
-  }
-
-  c9x.delayUp = delayUp;
-  c9x.delayDown = delayDown;
-  c9x.speedUp = speedUp;
-  c9x.speedDown = speedDown;
-  c9x.carryTrim = carryTrim;
-  c9x.mltpx = (MltpxValue)mltpx;
-  c9x.mixWarn = mixWarn;
-  c9x.sOffset = sOffset;
-
-  if (curve > 6) {
-    c9x.curve.type = CurveReference::CURVE_REF_CUSTOM;
-    c9x.curve.value = curve - 6;
-  }
-  else if (curve > 0) {
-    c9x.curve.type = CurveReference::CURVE_REF_FUNC;
-    c9x.curve.value = curve;
-  }
-
-  return c9x;
-}
-
-RawSource gruvin9xToSource(int8_t value)
-{
-  if (value == 0) {
-    return RawSource(SOURCE_TYPE_NONE);
-  }
-  else if (value <= 7) {
-    return RawSource(SOURCE_TYPE_STICK, value - 1);
-  }
-  else if (value == 8) {
-    return RawSource(SOURCE_TYPE_MAX);
-  }
-  else if (value == 9) {
-    return RawSource(SOURCE_TYPE_MAX);
-  }
-  else if (value <= 12) {
-    return RawSource(SOURCE_TYPE_CYC, value-10);
-  }
-  else if (value <= 20) {
-    return RawSource(SOURCE_TYPE_PPM, value-13);
-  }
-  else if (value <= 36) {
-    return RawSource(SOURCE_TYPE_CH, value-21);
-  }
-  else {
-    return RawSource(SOURCE_TYPE_TELEMETRY, value-36);
-  }
-}
-
-Gruvin9xLogicalSwitchData::operator LogicalSwitchData ()
-{
-  LogicalSwitchData c9x;
-  c9x.func = func;
-  c9x.val1 = v1;
-  c9x.val2 = v2;
-
-  if ((c9x.func >= LS_FN_VPOS && c9x.func <= LS_FN_ANEG) || c9x.func >= LS_FN_EQUAL) {
-    c9x.val1 = gruvin9xToSource(v1).toValue();
-  }
-
-  if (c9x.func >= LS_FN_EQUAL) {
-    c9x.val2 = gruvin9xToSource(v2).toValue();
-  }
-
-  if (c9x.func >= LS_FN_AND && c9x.func <= LS_FN_XOR) {
-    c9x.val1 = gruvin9xToSwitch(v1).toValue();
-    c9x.val2 = gruvin9xToSwitch(v2).toValue();
-  }
-
-  return c9x;
-}
-
-Gruvin9xCustomFunctionData::operator CustomFunctionData ()
-{
-  CustomFunctionData c9x;
-  c9x.swtch = gruvin9xToSwitch(swtch);
-  c9x.func = (AssignFunc)(func + G9X_NUM_CHNOUT);
-  return c9x;
-}
-
-t_Gruvin9xSwashRingData::t_Gruvin9xSwashRingData()
-{
-  memset(this, 0, sizeof(t_Gruvin9xSwashRingData));
-}
-
-t_Gruvin9xSwashRingData::operator SwashRingData ()
-{
-  SwashRingData c9x;
-  c9x.elevatorWeight = invertELE ? -100 : 100;
-  c9x.aileronWeight = invertAIL ? -100 : 100;
-  c9x.collectiveWeight = invertCOL ? -100 : 100;
-  c9x.type = type;
-  c9x.collectiveSource = gruvin9xToSource(collectiveSource);
-  c9x.value = value;
-  return c9x;
-}
-
-t_Gruvin9xFlightModeData_v102::operator FlightModeData ()
-{
-  FlightModeData c9x;
-  for (int i=0; i<NUM_STICKS; i++)
-    c9x.trim[i] = trim[i];
-  c9x.swtch = gruvin9xToSwitch(swtch);
-  getEEPROMZString(c9x.name, name, sizeof(name));
-  c9x.fadeIn = fadeIn;
-  c9x.fadeOut = fadeOut;
-  return c9x;
-}
-
-t_Gruvin9xFlightModeData_v106::operator FlightModeData ()
-{
-  FlightModeData c9x;
-  for (int i=0; i<NUM_STICKS; i++)
-    c9x.trim[i] = (((int16_t)trim[i]) << 2) + ((trim_ext >> (2*i)) & 0x03);
-  c9x.swtch = gruvin9xToSwitch(swtch);
-  getEEPROMZString(c9x.name, name, sizeof(name));
-  c9x.fadeIn = fadeIn;
-  c9x.fadeOut = fadeOut;
-  return c9x;
-}
-
-extern RawSwitch getEr9xTimerMode(int mode);
-
-t_Gruvin9xTimerData::operator TimerData ()
-{
-  TimerData c9x;
-  c9x.mode = getEr9xTimerMode(mode);
-  c9x.val = val;
-  return c9x;
-}
-
-t_Gruvin9xFrSkyChannelData::t_Gruvin9xFrSkyChannelData()
-{
-  memset(this, 0, sizeof(t_Gruvin9xFrSkyChannelData));
-}
-
-t_Gruvin9xFrSkyChannelData::operator FrSkyChannelData ()
-{
-  FrSkyChannelData c9x;
-  c9x.ratio = ratio;
-  c9x.alarms[0].value = alarms_value[0];
-  c9x.alarms[0].level =  alarms_level & 3;
-  c9x.alarms[0].greater = alarms_greater & 1;
-  c9x.alarms[1].value = alarms_value[1];
-  c9x.alarms[1].level =  (alarms_level >> 2) & 3;
-  c9x.alarms[1].greater = (alarms_greater >> 1) & 1;
-  c9x.type = type;
-  return c9x;
-}
-
-t_Gruvin9xFrSkyData::t_Gruvin9xFrSkyData()
-{
-  memset(this, 0, sizeof(t_Gruvin9xFrSkyData));
-}
-
-t_Gruvin9xFrSkyData::operator FrSkyData ()
-{
-  FrSkyData c9x;
-  c9x.channels[0] = channels[0];
-  c9x.channels[1] = channels[1];
-  return c9x;
-}
-
-t_Gruvin9xModelData_v102::operator ModelData ()
-{
-  ModelData c9x;
-  c9x.used = true;
-  getEEPROMString(c9x.name, name, sizeof(name));
-  c9x.timers[0] = timer1;
-  c9x.timers[1] = timer2;
-
-  switch(protocol) {
-    case 1:
-      c9x.moduleData[0].protocol = PULSES_PXX_DJT;
-      break;
-    case 2:
-      c9x.moduleData[0].protocol = PULSES_DSM2;
-      break;
-    case 3:
-      c9x.moduleData[0].protocol = PULSES_SILV_A;
-      break;
-    case 4:
-      c9x.moduleData[0].protocol = PULSES_SILV_B;
-      break;
-    case 5:
-      c9x.moduleData[0].protocol = PULSES_SILV_C;
-      break;
-    case 6:
-      c9x.moduleData[0].protocol = PULSES_CTP1009;
-      break;
-    default:
-      c9x.moduleData[0].protocol = PULSES_PPM;
-      break;
-  }
-  c9x.moduleData[0].channelsCount = 8 + (2 * ppmNCH);
-  c9x.thrTrim = thrTrim;
-  c9x.trimInc = trimInc-2;
-  c9x.moduleData[0].ppm.delay = 300 + 50 * ppmDelay;
-  c9x.beepANACenter = beepANACenter;
-  c9x.moduleData[0].ppm.pulsePol = pulsePol;
-  c9x.extendedLimits = extendedLimits;
-  for (int i=0; i<G9X_MAX_FLIGHT_MODES; i++)
-    c9x.flightModeData[i] = flightModeData[i];
-  for (int i=0; i<G9X_MAX_MIXERS; i++)
-    c9x.mixData[i] = mixData[i];
-  for (int i=0; i<G9X_NUM_CHNOUT; i++)
-    c9x.limitData[i] = limitData[i];
-  for (int i=0; i<G9X_MAX_EXPOS; i++)
-    c9x.expoData[i] = expoData[i];
-
-  for (int i=0; i<G9X_MAX_CURVE5; i++) {
-    c9x.curves[i].count = 5;
-    for (int j = 0; j < 5; j++) {
-      c9x.curves[i].points[j].x = -100 + 50 * i;
-      c9x.curves[i].points[j].y = curves5[i][j];
-    }
-  }
-  for (int i=0; i<G9X_MAX_CURVE9; i++) {
-    c9x.curves[G9X_MAX_CURVE5 + i].count = 9;
-    for (int j = 0; j < 9; j++) {
-      c9x.curves[G9X_MAX_CURVE5 + i].points[j].x = -100 + 25 * i;
-      c9x.curves[G9X_MAX_CURVE5 + i].points[j].y = curves9[i][j];
-    }
-  }
-
-  for (int i=0; i<G9X_NUM_CSW; i++)
-    c9x.logicalSw[i] = logicalSw[i];
-  // for (int i=0; i<G9X_NUM_CHNOUT; i++)
-  //  c9x.safetySw[i] = safetySw[i];
-  c9x.swashRingData = swashR;
-  c9x.frsky = frsky;
-  return c9x;
-}
-
-t_Gruvin9xModelData_v103::operator ModelData ()
-{
-  ModelData c9x;
-  c9x.used = true;
-  getEEPROMZString(c9x.name, name, sizeof(name));
-  c9x.timers[0] = timer1;
-  c9x.timers[1] = timer2;
-  switch(protocol) {
-    case 1:
-      c9x.moduleData[0].protocol = PULSES_PXX_DJT;
-      break;
-    case 2:
-      c9x.moduleData[0].protocol = PULSES_DSM2;
-      break;
-    case 3:
-      c9x.moduleData[0].protocol = PULSES_SILV_A;
-      break;
-    case 4:
-      c9x.moduleData[0].protocol = PULSES_SILV_B;
-      break;
-    case 5:
-      c9x.moduleData[0].protocol = PULSES_SILV_C;
-      break;
-    case 6:
-      c9x.moduleData[0].protocol = PULSES_CTP1009;
-      break;
-    default:
-      c9x.moduleData[0].protocol = PULSES_PPM;
-      break;
-  }
-  c9x.moduleData[0].channelsCount = 8 + (2 * ppmNCH);
-  c9x.thrTrim = thrTrim;
-  c9x.trimInc = trimInc-2;
-  c9x.moduleData[0].ppm.delay = 300 + 50 * ppmDelay;
-  c9x.beepANACenter = beepANACenter;
-  c9x.moduleData[0].ppm.pulsePol = pulsePol;
-  c9x.extendedLimits = extendedLimits;
-  for (int i=0; i<G9X_MAX_FLIGHT_MODES; i++)
-    c9x.flightModeData[i] = flightModeData[i];
-  for (int i=0; i<G9X_MAX_MIXERS; i++)
-    c9x.mixData[i] = mixData[i];
-  for (int i=0; i<G9X_NUM_CHNOUT; i++)
-    c9x.limitData[i] = limitData[i];
-  for (int i=0; i<G9X_MAX_EXPOS; i++)
-    c9x.expoData[i] = expoData[i];
-
-  for (int i=0; i<G9X_MAX_CURVE5; i++) {
-    c9x.curves[i].count = 5;
-    for (int j = 0; j < 5; j++) {
-      c9x.curves[i].points[j].x = -100 + 50 * i;
-      c9x.curves[i].points[j].y = curves5[i][j];
-    }
-  }
-  for (int i=0; i<G9X_MAX_CURVE9; i++) {
-    c9x.curves[G9X_MAX_CURVE5 + i].count = 9;
-    for (int j = 0; j < 9; j++) {
-      c9x.curves[G9X_MAX_CURVE5 + i].points[j].x = -100 + 25 * i;
-      c9x.curves[G9X_MAX_CURVE5 + i].points[j].y = curves9[i][j];
-    }
-  }
-
-  for (int i=0; i<G9X_NUM_CSW; i++)
-    c9x.logicalSw[i] = logicalSw[i];
-  // for (int i=0; i<G9X_NUM_CHNOUT; i++)
-  //   c9x.safetySw[i] = safetySw[i];
-  c9x.swashRingData = swashR;
-  c9x.frsky = frsky;
-  return c9x;
-}
-
-t_Gruvin9xModelData_v105::operator ModelData ()
-{
-  ModelData c9x;
-  c9x.used = true;
-  getEEPROMZString(c9x.name, name, sizeof(name));
-  c9x.timers[0] = timer1;
-  c9x.timers[1] = timer2;
-  switch(protocol) {
-    case 1:
-      c9x.moduleData[0].protocol = PULSES_PXX_DJT;
-      break;
-    case 2:
-      c9x.moduleData[0].protocol = PULSES_DSM2;
-      break;
-    case 3:
-      c9x.moduleData[0].protocol = PULSES_SILV_A;
-      break;
-    case 4:
-      c9x.moduleData[0].protocol = PULSES_SILV_B;
-      break;
-    case 5:
-      c9x.moduleData[0].protocol = PULSES_SILV_C;
-      break;
-    case 6:
-      c9x.moduleData[0].protocol = PULSES_CTP1009;
-      break;
-    default:
-      c9x.moduleData[0].protocol = PULSES_PPM;
-      break;
-  }
-  c9x.moduleData[0].channelsCount = 8 + (2 * ppmNCH);
-  c9x.thrTrim = thrTrim;
-  c9x.trimInc = trimInc-2;
-  c9x.moduleData[0].ppm.delay = 300 + 50 * ppmDelay;
-  c9x.beepANACenter = beepANACenter;
-  c9x.moduleData[0].ppm.pulsePol = pulsePol;
-  c9x.extendedLimits = extendedLimits;
-  c9x.extendedTrims = extendedTrims;
-  for (int i=0; i<G9X_MAX_FLIGHT_MODES; i++) {
-    c9x.flightModeData[i] = flightModeData[i];
-    for (int j=0; j<NUM_STICKS; j++) {
-      if (flightModeData[i].trim[j] > 125) {
-        c9x.flightModeData[i].trimRef[j] = 0;
-        c9x.flightModeData[i].trim[j] = 0;
-      }
-      else if (flightModeData[i].trim[j] < -125) {
-        c9x.flightModeData[i].trimRef[j] = 129 + flightModeData[i].trim[j];
-        if (c9x.flightModeData[i].trimRef[j] >= i)
-          c9x.flightModeData[i].trimRef[j] += 1;
-        c9x.flightModeData[i].trim[j] = 0;
-      }
-      else {
-        c9x.flightModeData[i].trim[j] += subtrim[j];
-      }
-    }
-  }
-  for (int i=0; i<G9X_MAX_MIXERS; i++)
-    c9x.mixData[i] = mixData[i];
-  for (int i=0; i<G9X_NUM_CHNOUT; i++)
-    c9x.limitData[i] = limitData[i];
-  for (int i=0; i<G9X_MAX_EXPOS; i++)
-    c9x.expoData[i] = expoData[i];
-
-  for (int i=0; i<G9X_MAX_CURVE5; i++) {
-    c9x.curves[i].count = 5;
-    for (int j = 0; j < 5; j++) {
-      c9x.curves[i].points[j].x = -100 + 50 * i;
-      c9x.curves[i].points[j].y = curves5[i][j];
-    }
-  }
-  for (int i=0; i<G9X_MAX_CURVE9; i++) {
-    c9x.curves[G9X_MAX_CURVE5 + i].count = 9;
-    for (int j = 0; j < 9; j++) {
-      c9x.curves[G9X_MAX_CURVE5 + i].points[j].x = -100 + 25 * i;
-      c9x.curves[G9X_MAX_CURVE5 + i].points[j].y = curves9[i][j];
-    }
-  }
-
-  for (int i=0; i<G9X_NUM_CSW; i++)
-    c9x.logicalSw[i] = logicalSw[i];
-  for (int i=0; i<G9X_NUM_FSW; i++)
-    c9x.customFn[i] = customFn[i];
-  // for (int i=0; i<G9X_NUM_CHNOUT; i++)
-  //  c9x.safetySw[i] = safetySw[i];
-  c9x.swashRingData = swashR;
-  c9x.frsky = frsky;
-
-  return c9x;
-}
-
-t_Gruvin9xModelData_v106::operator ModelData ()
-{
-  ModelData c9x;
-  c9x.used = true;
-  getEEPROMZString(c9x.name, name, sizeof(name));
-  c9x.timers[0] = timer1;
-  c9x.timers[1] = timer2;
-  switch(protocol) {
-    case 1:
-      c9x.moduleData[0].protocol = PULSES_PXX_DJT;
-      break;
-    case 2:
-      c9x.moduleData[0].protocol = PULSES_DSM2;
-      break;
-    case 3:
-      c9x.moduleData[0].protocol = PULSES_SILV_A;
-      break;
-    case 4:
-      c9x.moduleData[0].protocol = PULSES_SILV_B;
-      break;
-    case 5:
-      c9x.moduleData[0].protocol = PULSES_SILV_C;
-      break;
-    case 6:
-      c9x.moduleData[0].protocol = PULSES_CTP1009;
-      break;
-    default:
-      c9x.moduleData[0].protocol = PULSES_PPM;
-      break;
-  }
-  c9x.moduleData[0].channelsCount = 8 + (2 * ppmNCH);
-  c9x.thrTrim = thrTrim;
-  c9x.trimInc = trimInc-2;
-  c9x.moduleData[0].ppm.delay = 300 + 50 * ppmDelay;
-  c9x.beepANACenter = beepANACenter;
-  c9x.moduleData[0].ppm.pulsePol = pulsePol;
-  c9x.extendedLimits = extendedLimits;
-  c9x.extendedTrims = extendedTrims;
-  for (int i=0; i<G9X_MAX_FLIGHT_MODES; i++) {
-    c9x.flightModeData[i] = flightModeData[i];
-    for (int j=0; j<NUM_STICKS; j++) {
-      if (c9x.flightModeData[i].trim[j] > 500) {
-        c9x.flightModeData[i].trimRef[j] = c9x.flightModeData[i].trim[j] - 501;
-        if (c9x.flightModeData[i].trimRef[j] >= i)
-          c9x.flightModeData[i].trimRef[j] += 1;
-        c9x.flightModeData[i].trim[j] = 0;
-      }
-    }
-  }
-  for (int i=0; i<G9X_MAX_MIXERS; i++)
-    c9x.mixData[i] = mixData[i];
-  for (int i=0; i<G9X_NUM_CHNOUT; i++)
-    c9x.limitData[i] = limitData[i];
-  for (int i=0; i<G9X_MAX_EXPOS; i++)
-    c9x.expoData[i] = expoData[i];
-
-  for (int i=0; i<G9X_MAX_CURVE5; i++) {
-    c9x.curves[i].count = 5;
-    for (int j = 0; j < 5; j++) {
-      c9x.curves[i].points[j].x = -100 + 50 * i;
-      c9x.curves[i].points[j].y = curves5[i][j];
-    }
-  }
-  for (int i=0; i<G9X_MAX_CURVE9; i++) {
-    c9x.curves[G9X_MAX_CURVE5 + i].count = 9;
-    for (int j = 0; j < 9; j++) {
-      c9x.curves[G9X_MAX_CURVE5 + i].points[j].x = -100 + 25 * i;
-      c9x.curves[G9X_MAX_CURVE5 + i].points[j].y = curves9[i][j];
-    }
-  }
-
-  for (int i=0; i<G9X_NUM_CSW; i++)
-    c9x.logicalSw[i] = logicalSw[i];
-  for (int i=0; i<G9X_NUM_FSW; i++)
-    c9x.customFn[i] = customFn[i];
-  // for (int i=0; i<G9X_NUM_CHNOUT; i++)
-  //   c9x.safetySw[i] = safetySw[i];
-  c9x.swashRingData = swashR;
-  c9x.frsky = frsky;
-
-  return c9x;
-}
-

companion/src/firmwares/gruvin9x/gruvin9xeeprom.h

@@ -1,421 +0,0 @@
-/*
- * Author - Bertrand Songis <bsongis@gmail.com>
- *
- * Based on th9x -> http://code.google.com/p/th9x/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef gruvin9xeeprom_h
-#define gruvin9xeeprom_h
-
-#include <inttypes.h>
-#include "eeprominterface.h"
-#define GR9X_MAX_CSFUNC 13
-
-PACK(typedef struct t_Gruvin9xTrainerMix_v103 {
-  uint8_t srcChn:3; //0-7 = ch1-8
-  int8_t  swtch:5;
-  int8_t  studWeight:6;
-  uint8_t mode:2;   //off,add-mode,subst-mode
-
-  operator TrainerMix();
-  t_Gruvin9xTrainerMix_v103() { memset(this, 0, sizeof(t_Gruvin9xTrainerMix_v103)); }
-
-}) Gruvin9xTrainerMix_v103; //
-
-PACK(typedef struct t_Gruvin9xTrainerMix_v104 {
-  uint8_t srcChn:6; // 0-7 = ch1-8
-  uint8_t mode:2;   // off,add-mode,subst-mode
-  int8_t  studWeight;
-
-  operator TrainerMix();
-  t_Gruvin9xTrainerMix_v104() { memset(this, 0, sizeof(t_Gruvin9xTrainerMix_v104)); }
-}) Gruvin9xTrainerMix_v104; //
-
-PACK(typedef struct t_Gruvin9xTrainerData_v103 {
-  int16_t        calib[4];
-  Gruvin9xTrainerMix_v103     mix[4];
-
-  operator TrainerData();
-}) Gruvin9xTrainerData_v103;
-
-PACK(typedef struct t_Gruvin9xTrainerData_v104 {
-  int16_t        calib[4];
-  Gruvin9xTrainerMix_v104     mix[4];
-
-  operator TrainerData();
-  t_Gruvin9xTrainerData_v104() { memset(this, 0, sizeof(t_Gruvin9xTrainerData_v104)); }
-}) Gruvin9xTrainerData_v104;
-
-PACK(typedef struct t_Gruvin9xFrSkyRSSIAlarm {
-  uint8_t       level:2;
-  int8_t        value:6;
-}) Gruvin9xFrSkyRSSIAlarm;
-
-PACK(typedef struct t_Gruvin9xGeneral_v103 {
-  uint8_t   myVers;
-  int16_t   calibMid[7];
-  int16_t   calibSpanNeg[7];
-  int16_t   calibSpanPos[7];
-  uint16_t  chkSum;
-  uint8_t   currModel; //0..15
-  uint8_t   contrast;
-  uint8_t   vBatWarn;
-  int8_t    txVoltageCalibration;
-  int8_t    lightSw;
-  Gruvin9xTrainerData_v103 trainer;
-  uint8_t   view;      //index of subview in main scrren
-  uint8_t   disableThrottleWarning:1;
-  int8_t    switchWarning:2; // -1=down, 0=off, 1=up
-  uint8_t   beeperVal:3;
-  uint8_t   disableMemoryWarning:1;
-  uint8_t   disableAlarmWarning:1;
-  uint8_t   stickMode;
-  uint8_t   inactivityTimer;
-  uint8_t   throttleReversed:1;
-  uint8_t   minuteBeep:1;
-  uint8_t   preBeep:1;
-  uint8_t   flashBeep:1;
-  uint8_t   disableSplashScreen:1;
-  uint8_t   enableTelemetryAlarm:1;   // 0=no, 1=yes (Sound alarm when there's no telem. data coming in)
-  uint8_t   spare:2;
-  uint8_t   filterInput;
-  uint8_t   lightAutoOff;
-  uint8_t   templateSetup;  //RETA order according to chout_ar array
-  int8_t    PPM_Multiplier;
-  Gruvin9xFrSkyRSSIAlarm frskyRssiAlarms[2];
-
-  operator GeneralSettings();
-  t_Gruvin9xGeneral_v103() { memset(this, 0, sizeof(t_Gruvin9xGeneral_v103)); }
-}) Gruvin9xGeneral_v103;
-
-PACK(typedef struct t_Gruvin9xGeneral_v104 {
-  uint8_t   myVers;
-  int16_t   calibMid[7];
-  int16_t   calibSpanNeg[7];
-  int16_t   calibSpanPos[7];
-  uint16_t  chkSum;
-  uint8_t   currModel; //0..15
-  uint8_t   contrast;
-  uint8_t   vBatWarn;
-  int8_t    txVoltageCalibration;
-  int8_t    lightSw;
-  Gruvin9xTrainerData_v104 trainer;
-  uint8_t   view;      //index of subview in main scrren
-  uint8_t   disableThrottleWarning:1;
-  int8_t    switchWarning:2; // -1=down, 0=off, 1=up
-  uint8_t   beeperVal:3;
-  uint8_t   disableMemoryWarning:1;
-  uint8_t   disableAlarmWarning:1;
-  uint8_t   stickMode;
-  uint8_t   inactivityTimer;
-  uint8_t   throttleReversed:1;
-  uint8_t   minuteBeep:1;
-  uint8_t   preBeep:1;
-  uint8_t   flashBeep:1;
-  uint8_t   disableSplashScreen:1;
-  uint8_t   enableTelemetryAlarm:1;   // 0=no, 1=yes (Sound alarm when there's no telem. data coming in)
-  uint8_t   spare:2;
-  uint8_t   filterInput;
-  uint8_t   lightAutoOff;
-  uint8_t   templateSetup;  //RETA order according to chout_ar array
-  int8_t    PPM_Multiplier;
-  Gruvin9xFrSkyRSSIAlarm frskyRssiAlarms[2];
-
-  operator GeneralSettings();
-  t_Gruvin9xGeneral_v104() { memset(this, 0, sizeof(t_Gruvin9xGeneral_v104)); }
-}) Gruvin9xGeneral_v104;
-
-typedef Gruvin9xGeneral_v104 Gruvin9xGeneral;
-
-// eeprom modelspec
-
-PACK(typedef struct t_Gruvin9xExpoData {
-  uint8_t mode:2;         // 0=end, 1=pos, 2=neg, 3=both
-  uint8_t chn:2;
-  uint8_t curve:4;        // 0=no curve, 1-6=std curves, 7-10=CV1-CV4, 11-15=CV9-CV13
-  int8_t  swtch:5;
-  uint8_t phase:3;        // if negPhase is 0: 0=normal, 5=FP4    if negPhase is 1: 5=!FP4
-  uint8_t negPhase:1;
-  uint8_t weight:7;
-  int8_t  expo;
-
-  operator ExpoData();
-  t_Gruvin9xExpoData();
-}) Gruvin9xExpoData;
-
-PACK(typedef struct t_Gruvin9xLimitData {
-  int8_t  min;
-  int8_t  max;
-  bool    revert;
-  int16_t  offset;
-
-  operator LimitData();
-  t_Gruvin9xLimitData();
-}) Gruvin9xLimitData;
-
-#define MLTPX_ADD  0
-#define MLTPX_MUL  1
-#define MLTPX_REP  2
-
-PACK(typedef struct t_Gruvin9xMixData {
-  uint8_t destCh:5;          // 0, 1..C9X_NUM_CHNOUT
-  uint8_t mixWarn:3;         // mixer warning
-  uint8_t srcRaw;            //
-  int8_t  weight;
-  int8_t  swtch;
-  uint8_t curve;             // 0=symmetrisch, 1=no neg, 2=no pos
-  uint8_t delayUp:4;
-  uint8_t delayDown:4;
-  uint8_t speedUp:4;         // Servogeschwindigkeit aus Tabelle (10ms Cycle)
-  uint8_t speedDown:4;       // 0 nichts
-  uint8_t carryTrim:1;
-  uint8_t mltpx:3;           // multiplex method 0=+ 1=* 2=replace
-  int8_t  phase:4;           // -5=!FP4, 0=normal, 5=FP4
-  int8_t  sOffset;
-
-  operator MixData();
-  t_Gruvin9xMixData();
-}) Gruvin9xMixData;
-
-PACK(typedef struct t_Gruvin9xLogicalSwitchData { // Custom Switches data
-  int8_t  v1; //input
-  int8_t  v2; //offset
-  uint8_t func;
-
-  operator LogicalSwitchData();
-  t_Gruvin9xLogicalSwitchData() { memset(this, 0, sizeof(t_Gruvin9xLogicalSwitchData)); }
-}) Gruvin9xLogicalSwitchData;
-
-PACK(typedef struct t_Gruvin9xSafetySwData { // Safety Switches data
-  int8_t  swtch;
-  int8_t  val;
-
-  t_Gruvin9xSafetySwData() { memset(this, 0, sizeof(t_Gruvin9xSafetySwData)); }
-}) Gruvin9xSafetySwData;
-
-PACK(typedef struct t_Gruvin9xCustomFunctionData { // Function Switches data
-  int8_t  swtch; // input
-  uint8_t func;
-
-  operator CustomFunctionData();
-  t_Gruvin9xCustomFunctionData() { memset(this, 0, sizeof(t_Gruvin9xCustomFunctionData)); }
-}) Gruvin9xCustomFunctionData;
-
-PACK(typedef struct t_Gruvin9xFrSkyChannelData {
-  uint16_t  ratio:12;           // (Maximum resistor divider input volts +/- calibration. 0 means channel not used.
-                                    // 0.01v steps from 0 to 40.95V. Ex. 6.60 Volts = 660. 40.95V = 4095
-  uint16_t  type:4;             // channel display unit (0=volts, 1=raw, 2-15=reserverd.)
-  uint8_t   alarms_value[2];    // raw sample values 0..255
-  uint8_t   alarms_level:4;     // two pairs of 2bits. none=0, yel=1, org=2, red=3
-  uint8_t   alarms_greater:2;   // two alarms, 1 bit each. 0=LT(<), 1=GT(>)
-  uint8_t   spare:2;
-  uint8_t   barMin;             // minimum for bar display (raw ADC value)
-  uint8_t   barMax;             // ditto for max display (would G:NOT usually = ratio)
-
-  operator FrSkyChannelData();
-  t_Gruvin9xFrSkyChannelData();
-}) Gruvin9xFrSkyChannelData;
-
-PACK(typedef struct t_Gruvin9xFrSkyData {
-  Gruvin9xFrSkyChannelData channels[2];
-
-  operator FrSkyData();
-  t_Gruvin9xFrSkyData();
-}) Gruvin9xFrSkyData;
-
-PACK(typedef struct t_Gruvin9xSwashRingData { // Swash Ring data
-  uint8_t   invertELE:1;
-  uint8_t   invertAIL:1;
-  uint8_t   invertCOL:1;
-  uint8_t   type:5;
-  uint8_t   collectiveSource;
-  uint8_t   value;
-
-  operator SwashRingData();
-  t_Gruvin9xSwashRingData();
-}) Gruvin9xSwashRingData;
-
-PACK(typedef struct t_Gruvin9xFlightModeData_v102 {
-  int8_t trim[4];     // -125..125 => trim value, 127 => use trim of phase 0, -128, -127, -126 => use trim of phases 1|2|3|4 instead
-  int8_t swtch;       // swtch of phase[0] is not used
-  char name[6];
-  uint8_t fadeIn:4;
-  uint8_t fadeOut:4;
-
-  operator FlightModeData();
-  t_Gruvin9xFlightModeData_v102() { memset(this, 0, sizeof(t_Gruvin9xFlightModeData_v102)); }
-}) Gruvin9xFlightModeData_v102;
-
-
-PACK(typedef struct t_Gruvin9xFlightModeData_v106 {
-  int8_t trim[4];     // -500..500 => trim value, 501 => use trim of phase 0, 502, 503, 504 => use trim of phases 1|2|3|4 instead
-  int8_t trim_ext:8;  // 2 less significant extra bits per trim (10bits trims)
-  int8_t swtch;       // swtch of phase[0] is not used
-  char name[6];
-  uint8_t fadeIn:4;
-  uint8_t fadeOut:4;
-
-  operator FlightModeData();
-  t_Gruvin9xFlightModeData_v106() { memset(this, 0, sizeof(t_Gruvin9xFlightModeData_v106)); }
-}) Gruvin9xFlightModeData_v106;
-
-PACK(typedef struct t_Gruvin9xTimerData {
-  int8_t    mode:7;            // timer trigger source -> off, abs, stk, stk%, sw/!sw, !m_sw/!m_sw
-  uint8_t   dir:1;             // 0=>Count Down, 1=>Count Up
-  uint16_t  val;
-
-  operator TimerData();
-  t_Gruvin9xTimerData() { memset(this, 0, sizeof(t_Gruvin9xTimerData)); }
-}) Gruvin9xTimerData;
-
-#define G9X_MAX_FLIGHT_MODES 5
-#define G9X_MAX_MIXERS 32
-#define G9X_MAX_EXPOS  14
-#define G9X_MAX_CURVE5 8
-#define G9X_MAX_CURVE9 8
-
-#define G9X_NUM_CHNOUT   16 // number of real output channels CH1-CH16
-#define G9X_NUM_CSW      12 // number of custom switches
-#define G9X_NUM_FSW      12 // number of functions assigned to switches
-
-// TODO
-PACK(typedef struct t_Gruvin9xModelData_v102 {
-  char      name[10];             // 10 must be first for eeLoadModelName
-  Gruvin9xTimerData timer1;
-  uint8_t   protocol:3;
-  int8_t    ppmNCH:3;
-  uint8_t   thrTrim:1;            // Enable Throttle Trim
-  uint8_t   thrExpo:1;            // Enable Throttle Expo
-  uint8_t   trimInc:3;            // Trim Increments
-  uint8_t   spare1:1;
-  uint8_t   pulsePol:1;
-  uint8_t   extendedLimits:1;
-  uint8_t   extendedTrims:1;
-  uint8_t   spare2:1;
-  int8_t    ppmDelay;
-  uint8_t   beepANACenter;        // 1<<0->A1.. 1<<6->A7
-  Gruvin9xTimerData timer2;
-  Gruvin9xMixData   mixData[G9X_MAX_MIXERS];
-  Gruvin9xLimitData limitData[G9X_NUM_CHNOUT];
-  Gruvin9xExpoData  expoData[G9X_MAX_EXPOS];
-  int8_t    curves5[G9X_MAX_CURVE5][5];
-  int8_t    curves9[G9X_MAX_CURVE9][9];
-  Gruvin9xLogicalSwitchData  logicalSw[G9X_NUM_CSW];
-  Gruvin9xSafetySwData  safetySw[G9X_NUM_CHNOUT];
-  Gruvin9xSwashRingData swashR;
-  Gruvin9xFlightModeData_v102 flightModeData[G9X_MAX_FLIGHT_MODES];
-  Gruvin9xFrSkyData frsky;
-
-  operator ModelData();
-  t_Gruvin9xModelData_v102() { memset(this, 0, sizeof(t_Gruvin9xModelData_v102)); }
-
-}) Gruvin9xModelData_v102;
-
-PACK(typedef struct t_Gruvin9xModelData_v103 {
-  char      name[10];             // 10 must be first for eeLoadModelName
-  Gruvin9xTimerData timer1;
-  uint8_t   protocol:3;
-  int8_t    ppmNCH:3;
-  uint8_t   thrTrim:1;            // Enable Throttle Trim
-  uint8_t   thrExpo:1;            // Enable Throttle Expo
-  uint8_t   trimInc:3;            // Trim Increments
-  uint8_t   spare1:1;
-  uint8_t   pulsePol:1;
-  uint8_t   extendedLimits:1;
-  uint8_t   extendedTrims:1;
-  uint8_t   spare2:1;
-  int8_t    ppmDelay;
-  uint8_t   beepANACenter;        // 1<<0->A1.. 1<<6->A7
-  Gruvin9xTimerData timer2;
-  Gruvin9xMixData   mixData[G9X_MAX_MIXERS];
-  Gruvin9xLimitData limitData[G9X_NUM_CHNOUT];
-  Gruvin9xExpoData  expoData[G9X_MAX_EXPOS];
-  int8_t    curves5[G9X_MAX_CURVE5][5];
-  int8_t    curves9[G9X_MAX_CURVE9][9];
-  Gruvin9xLogicalSwitchData  logicalSw[G9X_NUM_CSW];
-  Gruvin9xSafetySwData  safetySw[G9X_NUM_CHNOUT];
-  Gruvin9xSwashRingData swashR;
-  Gruvin9xFlightModeData_v102 flightModeData[G9X_MAX_FLIGHT_MODES];
-  Gruvin9xFrSkyData frsky;
-
-  operator ModelData();
-  t_Gruvin9xModelData_v103() { memset(this, 0, sizeof(t_Gruvin9xModelData_v103)); }
-
-}) Gruvin9xModelData_v103;
-
-PACK(typedef struct t_Gruvin9xModelData_v105 {
-  char      name[10];             // 10 must be first for eeLoadModelName
-  Gruvin9xTimerData timer1;
-  uint8_t   protocol:3;
-  int8_t    ppmNCH:3;
-  uint8_t   thrTrim:1;            // Enable Throttle Trim
-  uint8_t   thrExpo:1;            // Enable Throttle Expo
-  uint8_t   trimInc:3;            // Trim Increments
-  uint8_t   spare1:1;
-  uint8_t   pulsePol:1;
-  uint8_t   extendedLimits:1;
-  uint8_t   extendedTrims:1;
-  uint8_t   spare2:1;
-  int8_t    ppmDelay;
-  uint8_t   beepANACenter;        // 1<<0->A1.. 1<<6->A7
-  Gruvin9xTimerData timer2;
-  Gruvin9xMixData   mixData[G9X_MAX_MIXERS];
-  Gruvin9xLimitData limitData[G9X_NUM_CHNOUT];
-  Gruvin9xExpoData  expoData[G9X_MAX_EXPOS];
-  int8_t    curves5[G9X_MAX_CURVE5][5];
-  int8_t    curves9[G9X_MAX_CURVE9][9];
-  Gruvin9xLogicalSwitchData  logicalSw[G9X_NUM_CSW];
-  Gruvin9xSafetySwData  safetySw[G9X_NUM_CHNOUT];
-  Gruvin9xCustomFunctionData    customFn[G9X_NUM_FSW];
-  Gruvin9xSwashRingData swashR;
-  Gruvin9xFlightModeData_v102 flightModeData[G9X_MAX_FLIGHT_MODES];
-  int16_t   subtrim[NUM_STICKS];
-  Gruvin9xFrSkyData frsky;
-
-  operator ModelData();
-  t_Gruvin9xModelData_v105() { memset(this, 0, sizeof(t_Gruvin9xModelData_v105)); }
-}) Gruvin9xModelData_v105;
-
-PACK(typedef struct t_Gruvin9xModelData_v106 {
-  char      name[10];             // 10 must be first for eeLoadModelName
-  Gruvin9xTimerData timer1;
-  uint8_t   protocol:3;
-  uint8_t   thrTrim:1;            // Enable Throttle Trim
-  int8_t    ppmNCH:4;
-  uint8_t   trimInc:3;            // Trim Increments
-  uint8_t   thrExpo:1;            // Enable Throttle Expo
-  uint8_t   pulsePol:1;
-  uint8_t   extendedLimits:1;
-  uint8_t   extendedTrims:1;
-  uint8_t   spare2:1;
-  int8_t    ppmDelay;
-  uint8_t   beepANACenter;        // 1<<0->A1.. 1<<6->A7
-  Gruvin9xTimerData timer2;
-  Gruvin9xMixData   mixData[G9X_MAX_MIXERS];
-  Gruvin9xLimitData limitData[G9X_NUM_CHNOUT];
-  Gruvin9xExpoData  expoData[G9X_MAX_EXPOS];
-  int8_t    curves5[G9X_MAX_CURVE5][5];
-  int8_t    curves9[G9X_MAX_CURVE9][9];
-  Gruvin9xLogicalSwitchData  logicalSw[G9X_NUM_CSW];
-  Gruvin9xSafetySwData  safetySw[G9X_NUM_CHNOUT];
-  Gruvin9xCustomFunctionData    customFn[G9X_NUM_FSW];
-  Gruvin9xSwashRingData swashR;
-  Gruvin9xFlightModeData_v106 flightModeData[G9X_MAX_FLIGHT_MODES];
-  Gruvin9xFrSkyData frsky;
-
-  operator ModelData();
-  t_Gruvin9xModelData_v106() { memset(this, 0, sizeof(t_Gruvin9xModelData_v106)); }
-}) Gruvin9xModelData_v106;
-
-typedef Gruvin9xModelData_v106 Gruvin9xModelData;
-
-#endif

companion/src/firmwares/gruvin9x/gruvin9xinterface.cpp

@@ -1,252 +0,0 @@
-/*
- * Author - Bertrand Songis <bsongis@gmail.com>
- * 
- * Based on th9x -> http://code.google.com/p/th9x/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <iostream>
-#include "gruvin9xinterface.h"
-#include "gruvin9xeeprom.h"
-#include "file.h"
-#include "appdata.h"
-
-#define FILE_TYP_GENERAL 1
-#define FILE_TYP_MODEL   2
-
-#define FILE_GENERAL   0
-#define FILE_MODEL(n) (1+n)
-
-Gruvin9xInterface::Gruvin9xInterface(BoardEnum board):
-EEPROMInterface(board),
-efile(new RleFile())
-{
-}
-
-Gruvin9xInterface::~Gruvin9xInterface()
-{
-  delete efile;
-}
-
-const char * Gruvin9xInterface::getName()
-{
-  if (board == BOARD_STOCK)
-    return "Gruvin9x";
-  else
-    return "Gruvin9x v4";
-}
-
-const int Gruvin9xInterface::getEEpromSize()
-{
-  if (board == BOARD_STOCK) {
-    QString avrMCU = g.mcu();
-    if (avrMCU==QString("m128")) {
-      return EESIZE_STOCK*2;
-    }
-    return EESIZE_STOCK;
-  } else {
-    return EESIZE_GRUVIN9X;
-  }
-}
-
-const int Gruvin9xInterface::getMaxModels()
-{
-  return 16;
-}
-
-template <class T>
-void Gruvin9xInterface::loadModel(ModelData &model, unsigned int stickMode, int version)
-{
-  T _model;
-  if ((version == 2 && efile->readRlc2((uint8_t*)&_model, sizeof(T))) ||
-      (version == 1 && efile->readRlc1((uint8_t*)&_model, sizeof(T)))) {
-    model = _model;
-    if (stickMode) {
-      applyStickModeToModel(model, stickMode);
-    }
-  }
-  else {
-    model.clear();
-  }
-}
-
-template <class T>
-bool Gruvin9xInterface::loadGeneral(GeneralSettings &settings, int version)
-{
-  T _settings;
-  if ((version == 2 && efile->readRlc2((uint8_t*)&_settings, sizeof(T))) ||
-      (version == 1 && efile->readRlc1((uint8_t*)&_settings, sizeof(T)))) {
-    settings = _settings;
-    return true;
-  }
-
-  std::cerr << "error when loading general settings";
-  return false;
-}
-
-unsigned long Gruvin9xInterface::loadxml(RadioData &radioData, QDomDocument &doc)
-{
-  std::bitset<NUM_ERRORS> errors;
-  errors.set(UNKNOWN_ERROR);
-  return errors.to_ulong();
-}
-
-
-unsigned long Gruvin9xInterface::load(RadioData &radioData, const uint8_t *eeprom, int size)
-{
-  std::cout << "trying " << getName() << " import... ";
-
-  std::bitset<NUM_ERRORS> errors;
-
-  if (size != this->getEEpromSize()) {
-    std::cout << "wrong size\n";
-    errors.set(WRONG_SIZE);
-    return errors.to_ulong();
-  }
-
-  if (!efile->EeFsOpen((uint8_t *)eeprom, size, BOARD_STOCK)) {
-    std::cout << "wrong file system\n";
-    errors.set(WRONG_FILE_SYSTEM);
-    return errors.to_ulong();
-  }
-
-  efile->openRd(FILE_GENERAL);
-
-  uint8_t version;
-  if (efile->readRlc2(&version, 1) != 1) {
-    std::cout << "no\n";
-    errors.set(UNKNOWN_ERROR);
-    return errors.to_ulong();
-  }
-
-  if (version == 0) {
-    efile->openRd(FILE_GENERAL);
-    if (efile->readRlc1(&version, 1) != 1) {
-      std::cout << "no\n";
-      errors.set(UNKNOWN_ERROR);
-      return errors.to_ulong();
-    }
-  }
-
-  std::cout << "version " << (unsigned int)version << " ";
-
-  switch(version) {
-    case 5:
-    case 100:
-    case 101:
-    case 102:
-    case 103:
-    case 104:
-    case 105:
-      // subtrims(16bits) + function switches added
-    case 106:
-      // trims(10bits), no subtrims
-      break;
-    default:
-      std::cout << "not gruvin9x\n";
-      errors.set(NOT_GRUVIN9X);
-      return errors.to_ulong();
-  }
-
-  efile->openRd(FILE_GENERAL);
-  if (version == 5) {
-    if (!loadGeneral<Gruvin9xGeneral_v103>(radioData.generalSettings, 1)) {
-      errors.set(UNKNOWN_ERROR);
-      return errors.to_ulong();
-    }
-  }
-  else if (version < 104) {
-    if (!loadGeneral<Gruvin9xGeneral_v103>(radioData.generalSettings)) {
-      errors.set(UNKNOWN_ERROR);
-      return errors.to_ulong();
-    }
-  }
-  else if (version <= 106) {
-    if (!loadGeneral<Gruvin9xGeneral_v104>(radioData.generalSettings)) {
-      errors.set(UNKNOWN_ERROR);
-      return errors.to_ulong();
-    }
-  }
-  else {
-    std::cout << "ko\n";
-    errors.set(UNKNOWN_ERROR);
-    return errors.to_ulong();
-  }
-  
-  for (int i=0; i<getMaxModels(); i++) {
-    efile->openRd(FILE_MODEL(i));
-    if (version == 5) {
-      loadModel<Gruvin9xModelData_v102>(radioData.models[i], radioData.generalSettings.stickMode+1, 1);
-    }
-    else if (version < 103) {
-      loadModel<Gruvin9xModelData_v102>(radioData.models[i], radioData.generalSettings.stickMode+1);
-    }
-    else if (version == 103) {
-      loadModel<Gruvin9xModelData_v103>(radioData.models[i], radioData.generalSettings.stickMode+1);
-    }
-    else if (version == 105) {
-      loadModel<Gruvin9xModelData_v105>(radioData.models[i], radioData.generalSettings.stickMode+1);
-    }
-    else if (version == 106) {
-      loadModel<Gruvin9xModelData_v106>(radioData.models[i], radioData.generalSettings.stickMode+1);
-    }
-    else {
-      std::cout << "ko\n";
-      errors.set(UNKNOWN_ERROR);
-      return errors.to_ulong();
-    }
-  }
-
-  std::cout << "ok\n";
-  errors.set(ALL_OK);
-  return errors.to_ulong();
-}
-
-unsigned long Gruvin9xInterface::loadBackup(RadioData &radioData, uint8_t *eeprom, int esize, int index)
-{
-  std::bitset<NUM_ERRORS> errors;
-  errors.set(UNKNOWN_ERROR);
-  return errors.to_ulong();
-}
-
-int Gruvin9xInterface::save(uint8_t *eeprom, RadioData &radioData, uint32_t variant, uint8_t version)
-{
-  std::cout << "NO!\n";
-  // TODO an error
-
-  return 0;
-}
-
-int Gruvin9xInterface::getSize(const ModelData & model)
-{
-  return 0;
-}
-
-int Gruvin9xInterface::getSize(const GeneralSettings & settings)
-{
-  return 0;
-}
-
-int Gruvin9xInterface::isAvailable(PulsesProtocol proto, int port)
-{
-  switch (proto) {
-    case PULSES_PPM:
-    case PULSES_SILV_A:
-    case PULSES_SILV_B:
-    case PULSES_SILV_C:
-    case PULSES_CTP1009:
-    case PULSES_DSM2:
-      return 1;
-    default:
-      return 0;
-  }
-}

companion/src/firmwares/gruvin9x/gruvin9xinterface.h

@@ -1,65 +0,0 @@
-/*
- * Author - Bertrand Songis <bsongis@gmail.com>
- *
- * Based on th9x -> http://code.google.com/p/th9x/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef gruvin9x_interface_h
-#define gruvin9x_interface_h
-
-#include "eeprominterface.h"
-
-class RleFile;
-
-class Gruvin9xInterface : public EEPROMInterface
-{
-
-  public:
-
-    Gruvin9xInterface(BoardEnum board);
-
-    virtual ~Gruvin9xInterface();
-
-    virtual const char * getName();
-
-    virtual const int  getEEpromSize();
-
-    virtual const int getMaxModels();
-
-    virtual unsigned long load(RadioData &, const uint8_t *eeprom, int size);
-
-
-    virtual unsigned long loadBackup(RadioData &, uint8_t *eeprom,int esize, int index);
-
-    virtual unsigned long loadxml(RadioData &radioData, QDomDocument &doc);
-
-    virtual int save(uint8_t *eeprom, RadioData &radioData, uint32_t variant=0, uint8_t version=0);
-
-    virtual int getSize(const ModelData &);
-
-    virtual int getSize(const GeneralSettings & settings);
-
-    virtual int isAvailable(PulsesProtocol proto, int port=0);
-
-  protected:
-
-    template <class T>
-    void loadModel(ModelData &model, unsigned int stickMode=0, int version=2);
-
-    template <class T>
-    bool loadGeneral(GeneralSettings &settings, int version=2);
-
-    RleFile *efile;
-
-};
-
-#endif

companion/src/firmwares/gvardata.cpp

@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "gvardata.h"
+
+#include "radiodata.h"
+
+QString GVarData::unitToString() const
+{
+  switch (unit) {
+    case GVAR_UNIT_NUMBER:
+      return tr("");
+    case GVAR_UNIT_PERCENT:
+      return tr("%");
+    default:
+      return tr("?");  //  highlight unknown value
+  }
+}
+
+QString GVarData::precToString() const
+{
+  switch (prec) {
+    case GVAR_PREC_MUL10:
+      return tr("0._");
+    case GVAR_PREC_MUL1:
+      return tr("0.0");
+    default:
+      return tr("?.?");  //  highlight unknown value
+  }
+}
+
+QString GVarData::nameToString(int index) const
+{
+  return RadioData::getElementName(tr("GV"), index + 1, name);
+}
+
+int GVarData::multiplierSet()
+{
+  return (prec == 0 ? 1 : 10);
+}
+
+float GVarData::multiplierGet() const
+{
+  return (prec == 0 ? 1 : 0.1);
+}
+
+void GVarData::setMin(float val)
+{
+  min = (val * multiplierSet()) - GVAR_MIN_VALUE;
+}
+
+void GVarData::setMax(float val)
+{
+  max = GVAR_MAX_VALUE - (val * multiplierSet());
+}
+
+int GVarData::getMin() const
+{
+  return GVAR_MIN_VALUE + min;
+}
+
+int GVarData::getMax() const
+{
+  return GVAR_MAX_VALUE - max;
+}
+
+float GVarData::getMinPrec() const
+{
+  return getMin() * multiplierGet();
+}
+
+float GVarData::getMaxPrec() const
+{
+  return getMax() * multiplierGet();
+}

companion/src/firmwares/gvardata.h

@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef GVARDATA_H
+#define GVARDATA_H
+
+#include <QtCore>
+
+#define GVAR_NAME_LEN       3
+#define GVAR_MAX_VALUE      1024
+#define GVAR_MIN_VALUE      -GVAR_MAX_VALUE
+
+class GVarData {
+  Q_DECLARE_TR_FUNCTIONS(GVarData)
+
+  public:
+    GVarData() { clear(); }
+
+    enum {
+      GVAR_UNIT_NUMBER,
+      GVAR_UNIT_PERCENT
+    };
+
+    enum {
+      GVAR_PREC_MUL10,
+      GVAR_PREC_MUL1
+    };
+
+    char name[GVAR_NAME_LEN+1];
+    int min;
+    int max;
+    bool popup;
+    unsigned int prec;     // 0 0._  1 0.0
+    unsigned int unit;     // 0 _    1 %
+
+    void clear() {memset(this, 0, sizeof(GVarData)); }
+    QString unitToString() const;
+    QString precToString() const;
+    QString nameToString(int index) const;
+    int multiplierSet();
+    float multiplierGet() const;
+    void setMin(float val);
+    void setMax(float val);
+    int getMin() const;
+    int getMax() const;
+    float getMinPrec() const;
+    float getMaxPrec() const;
+};
+
+
+#endif // GVARDATA_H

companion/src/firmwares/io_data.cpp

@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "io_data.h"
+
+#include "radiodata.h"  // for RadioData::getElementName
+#include "radiodataconversionstate.h"
+
+/*
+ * ExpoData
+ */
+
+void ExpoData::convert(RadioDataConversionState & cstate)
+{
+  cstate.setComponent(tr("INP"), 3);
+  cstate.setSubComp(RawSource(SOURCE_TYPE_VIRTUAL_INPUT, chn).toString(cstate.fromModel(), cstate.fromGS(), cstate.fromType) % tr(" (@%1)").arg(cstate.subCompIdx));
+  srcRaw.convert(cstate);
+  swtch.convert(cstate);
+}
+
+
+/*
+ * MixData
+ */
+
+void MixData::convert(RadioDataConversionState & cstate)
+{
+  cstate.setComponent(tr("MIX"), 4);
+  cstate.setSubComp(RawSource(SOURCE_TYPE_CH, destCh-1).toString(cstate.fromModel(), cstate.fromGS(), cstate.fromType) % tr(" (@%1)").arg(cstate.subCompIdx));
+  srcRaw.convert(cstate);
+  swtch.convert(cstate);
+}
+
+
+/*
+ * LimitData
+ */
+
+QString LimitData::minToString() const
+{
+  return QString::number((qreal)min/10);
+}
+
+QString LimitData::maxToString() const
+{
+  return QString::number((qreal)max/10);
+}
+
+QString LimitData::revertToString() const
+{
+  return revert ? tr("INV") : tr("NOR");
+}
+
+QString LimitData::nameToString(int index) const
+{
+  return RadioData::getElementName(tr("CH"), index + 1, name);
+}
+
+QString LimitData::offsetToString() const
+{
+  return QString::number((qreal)offset/10, 'f', 1);
+}
+
+void LimitData::clear()
+{
+  memset(reinterpret_cast<void *>(this), 0, sizeof(LimitData));
+  min = -1000;
+  max = +1000;
+}
+
+
+/*
+ * CurveData
+ */
+
+CurveData::CurveData()
+{
+  clear(5);
+}
+
+void CurveData::clear(int count)
+{
+  memset(this, 0, sizeof(CurveData));
+  this->count = count;
+}
+
+bool CurveData::isEmpty() const
+{
+  for (int i=0; i<count; i++) {
+    if (points[i].y != 0) {
+      return false;
+    }
+  }
+  return true;
+}
+
+QString CurveData::nameToString(const int idx) const
+{
+  return RadioData::getElementName(tr("CV"), idx + 1, name);
+}
+
+
+/*
+ * FlightModeData
+ */
+
+void FlightModeData::clear(const int phase)
+{
+  memset(reinterpret_cast<void *>(this), 0, sizeof(FlightModeData));
+  if (phase != 0) {
+    for (int idx=0; idx<CPN_MAX_GVARS; idx++) {
+      gvars[idx] = 1025;
+    }
+    for (int idx=0; idx<CPN_MAX_ENCODERS; idx++) {
+      rotaryEncoders[idx] = 1025;
+    }
+  }
+}
+
+QString FlightModeData::nameToString(int index) const
+{
+  return RadioData::getElementName(tr("FM"), index, name);  // names are zero-based, FM0, FM1, etc
+}
+
+void FlightModeData::convert(RadioDataConversionState & cstate)
+{
+  cstate.setComponent("FMD", 2);
+  cstate.setSubComp(nameToString(cstate.subCompIdx));
+  swtch.convert(cstate);
+}

companion/src/firmwares/io_data.h

@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef IO_DATA_H
+#define IO_DATA_H
+
+#include "constants.h"
+#include "curvereference.h"
+#include "rawsource.h"
+#include "rawswitch.h"
+
+#include <QtCore>
+
+class RadioDataConversionState;
+
+enum InputMode {
+  INPUT_MODE_NONE,
+  INPUT_MODE_POS,
+  INPUT_MODE_NEG,
+  INPUT_MODE_BOTH
+};
+
+class ExpoData {
+  Q_DECLARE_TR_FUNCTIONS(ExpoData)
+
+  public:
+    ExpoData() { clear(); }
+    RawSource srcRaw;
+    unsigned int scale;
+    unsigned int mode;   // InputMode
+    unsigned int chn;
+    RawSwitch swtch;
+    unsigned int flightModes;        // -5=!FP4, 0=normal, 5=FP4
+    int  weight;
+    int offset;
+    CurveReference curve;
+    int carryTrim;
+    char name[10+1];
+    void clear() { memset(reinterpret_cast<void *>(this), 0, sizeof(ExpoData)); }
+    void convert(RadioDataConversionState & cstate);
+};
+
+enum MltpxValue {
+  MLTPX_ADD=0,
+  MLTPX_MUL=1,
+  MLTPX_REP=2
+};
+
+#define MIXDATA_NAME_LEN  10
+
+class MixData {
+  Q_DECLARE_TR_FUNCTIONS(MixData)
+
+  public:
+    MixData() { clear(); }
+    void convert(RadioDataConversionState & cstate);
+
+    unsigned int destCh;            //        1..CPN_MAX_CHNOUT
+    RawSource srcRaw;
+    int     weight;
+    RawSwitch swtch;
+    CurveReference     curve;             //0=symmetrisch
+    unsigned int delayUp;
+    unsigned int delayDown;
+    unsigned int speedUp;           // Servogeschwindigkeit aus Tabelle (10ms Cycle)
+    unsigned int speedDown;         // 0 nichts
+    int  carryTrim;
+    bool noExpo;
+    MltpxValue mltpx;          // multiplex method 0=+ 1=* 2=replace
+    unsigned int mixWarn;           // mixer warning
+    unsigned int flightModes;             // -5=!FP4, 0=normal, 5=FP4
+    int    sOffset;
+    char   name[MIXDATA_NAME_LEN+1];
+
+    void clear() { memset(reinterpret_cast<void *>(this), 0, sizeof(MixData)); }
+};
+
+class LimitData {
+  Q_DECLARE_TR_FUNCTIONS(LimitData)
+
+  public:
+    LimitData() { clear(); }
+    int   min;
+    int   max;
+    bool  revert;
+    int   offset;
+    int   ppmCenter;
+    bool  symetrical;
+    char  name[6+1];
+    CurveReference curve;
+    QString minToString() const;
+    QString maxToString() const;
+    QString offsetToString() const;
+    QString revertToString() const;
+    QString nameToString(int index) const;
+    void clear();
+};
+
+class CurvePoint {
+  public:
+    int8_t x;
+    int8_t y;
+};
+
+class CurveData {
+  Q_DECLARE_TR_FUNCTIONS(CurveData)
+
+  public:
+    enum CurveType {
+      CURVE_TYPE_STANDARD,
+      CURVE_TYPE_CUSTOM,
+      CURVE_TYPE_LAST = CURVE_TYPE_CUSTOM
+    };
+
+    CurveData();
+    void clear(int count);
+    bool isEmpty() const;
+    QString nameToString(const int idx) const;
+
+    CurveType type;
+    bool smooth;
+    int  count;
+    CurvePoint points[CPN_MAX_POINTS];
+    char name[6+1];
+};
+
+class FlightModeData {
+  Q_DECLARE_TR_FUNCTIONS(FlightModeData)
+
+  public:
+    FlightModeData() { clear(0); }
+    int trimMode[CPN_MAX_TRIMS];
+    int trimRef[CPN_MAX_TRIMS];
+    int trim[CPN_MAX_TRIMS];
+    RawSwitch swtch;
+    char name[10+1];
+    unsigned int fadeIn;
+    unsigned int fadeOut;
+    int rotaryEncoders[CPN_MAX_ENCODERS];
+    int gvars[CPN_MAX_GVARS];
+    void clear(const int phase);
+    QString nameToString(int index) const;
+    void convert(RadioDataConversionState & cstate);
+};
+
+class SwashRingData {
+  Q_DECLARE_TR_FUNCTIONS(SwashRingData)
+
+  public:
+    SwashRingData() { clear(); }
+    int elevatorWeight;
+    int aileronWeight;
+    int collectiveWeight;
+    unsigned int  type;
+    RawSource collectiveSource;
+    RawSource aileronSource;
+    RawSource elevatorSource;
+    unsigned int  value;
+    void clear() { memset(reinterpret_cast<void *>(this), 0, sizeof(SwashRingData)); }
+};
+
+#endif // IO_DATA_H

companion/src/firmwares/logicalswitchdata.cpp

@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "logicalswitchdata.h"
+
+#include "radiodata.h"
+#include "radiodataconversionstate.h"
+#include "rawsource.h"
+#include "rawswitch.h"
+
+bool LogicalSwitchData::isEmpty() const
+{
+  return (func == 0);
+}
+
+CSFunctionFamily LogicalSwitchData::getFunctionFamily() const
+{
+  if (func == LS_FN_EDGE)
+    return LS_FAMILY_EDGE;
+  else if (func == LS_FN_TIMER)
+    return LS_FAMILY_TIMER;
+  else if (func == LS_FN_STICKY)
+    return LS_FAMILY_STICKY;
+  else if (func < LS_FN_AND || func > LS_FN_ELESS)
+    return LS_FAMILY_VOFS;
+  else if (func < LS_FN_EQUAL)
+    return LS_FAMILY_VBOOL;
+  else
+    return LS_FAMILY_VCOMP;
+}
+
+unsigned int LogicalSwitchData::getRangeFlags() const
+{
+  int f = 0;
+
+  if (func == LS_FN_DPOS || func == LS_FN_DAPOS)
+    f |= RANGE_DELTA_FUNCTION;
+
+  if (func == LS_FN_DAPOS || func == LS_FN_APOS || func == LS_FN_ANEG)
+    f |= RANGE_ABS_FUNCTION;
+
+  return f;
+}
+
+QString LogicalSwitchData::funcToString() const
+{
+  switch (func) {
+    case LS_FN_OFF:
+      return tr("---");
+    case LS_FN_VPOS:
+      return tr("a>x");
+    case LS_FN_VNEG:
+      return tr("a<x");
+    case LS_FN_APOS:
+      return tr("|a|>x");
+    case LS_FN_ANEG:
+      return tr("|a|<x");
+    case LS_FN_AND:
+      return tr("AND");
+    case LS_FN_OR:
+      return tr("OR");
+    case LS_FN_XOR:
+      return tr("XOR");
+    case LS_FN_EQUAL:
+      return tr("a=b");
+    case LS_FN_NEQUAL:
+      return tr("a!=b");
+    case LS_FN_GREATER:
+      return tr("a>b");
+    case LS_FN_LESS:
+      return tr("a<b");
+    case LS_FN_EGREATER:
+      return tr("a>=b");
+    case LS_FN_ELESS:
+      return tr("a<=b");
+    case LS_FN_DPOS:
+      return tr("d>=x");
+    case LS_FN_DAPOS:
+      return tr("|d|>=x");
+    case LS_FN_VEQUAL:
+      return tr("a=x");
+    case LS_FN_VALMOSTEQUAL:
+      return tr("a~x");
+    case LS_FN_TIMER:
+      return tr("Timer");
+    case LS_FN_STICKY:
+      return tr("Sticky");
+    case LS_FN_EDGE:
+      return tr("Edge");
+    default:
+      return tr("Unknown");
+  }
+}
+
+QString LogicalSwitchData::nameToString(int index) const
+{
+  return RadioData::getElementName(tr("L"), index + 1, NULL, true);
+}
+
+void LogicalSwitchData::convert(RadioDataConversionState & cstate)
+{
+  cstate.setComponent(tr("LSW"), 7);
+  cstate.setSubComp(RawSwitch(SWITCH_TYPE_VIRTUAL, cstate.subCompIdx + 1).toString(cstate.fromType, cstate.fromGS(), cstate.fromModel()));
+  CSFunctionFamily family = getFunctionFamily();
+  switch(family) {
+    case LS_FAMILY_VOFS:
+      val1 = RawSource(val1).convert(cstate.withComponentField("V1")).toValue();
+      break;
+    case LS_FAMILY_STICKY:
+    case LS_FAMILY_VBOOL:
+      val1 = RawSwitch(val1).convert(cstate.withComponentField("V1")).toValue();
+      val2 = RawSwitch(val2).convert(cstate.withComponentField("V2")).toValue();
+      break;
+    case LS_FAMILY_EDGE:
+      val1 = RawSwitch(val1).convert(cstate.withComponentField("V1")).toValue();
+      break;
+    case LS_FAMILY_VCOMP:
+      val1 = RawSource(val1).convert(cstate.withComponentField("V1")).toValue();
+      val2 = RawSource(val2).convert(cstate.withComponentField("V2")).toValue();
+      break;
+    default:
+      break;
+  }
+
+  andsw = RawSwitch(andsw).convert(cstate.withComponentField("AND")).toValue();
+}

companion/src/firmwares/logicalswitchdata.h

@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef LOGICALSWITCHDATA_H
+#define LOGICALSWITCHDATA_H
+
+#include <QtCore>
+
+class RadioDataConversionState;
+
+enum CSFunction {
+  LS_FN_OFF,
+  LS_FN_VPOS,
+  LS_FN_VNEG,
+  LS_FN_APOS,
+  LS_FN_ANEG,
+  LS_FN_AND,
+  LS_FN_OR,
+  LS_FN_XOR,
+  LS_FN_EQUAL,
+  LS_FN_NEQUAL,
+  LS_FN_GREATER,
+  LS_FN_LESS,
+  LS_FN_EGREATER,
+  LS_FN_ELESS,
+  LS_FN_DPOS,
+  LS_FN_DAPOS,
+  LS_FN_VEQUAL, // added at the end to avoid everything renumbered
+  LS_FN_VALMOSTEQUAL,
+  LS_FN_TIMER,
+  LS_FN_STICKY,
+  LS_FN_EDGE,
+  // later ... LS_FN_RANGE,
+    LS_FN_MAX
+};
+
+enum CSFunctionFamily {
+  LS_FAMILY_VOFS,
+  LS_FAMILY_VBOOL,
+  LS_FAMILY_VCOMP,
+  LS_FAMILY_TIMER,
+  LS_FAMILY_STICKY,
+  LS_FAMILY_EDGE,
+};
+
+class LogicalSwitchData {
+  Q_DECLARE_TR_FUNCTIONS(LogicalSwitchData)
+
+  public:
+    LogicalSwitchData(unsigned int func=0)
+    {
+      clear();
+      this->func = func;
+    }
+    unsigned int func;
+    int val1;
+    int val2;
+    int val3;
+    unsigned int delay;
+    unsigned int duration;
+    int andsw;
+
+    void clear() { memset(this, 0, sizeof(LogicalSwitchData)); }
+    bool isEmpty() const;
+    CSFunctionFamily getFunctionFamily() const;
+    unsigned int getRangeFlags() const;
+    QString funcToString() const;
+    QString nameToString(int index) const;
+    void convert(RadioDataConversionState & cstate);
+};
+
+#endif // LOGICALSWITCHDATA_H

companion/src/firmwares/modeldata.cpp

@@ -0,0 +1,444 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "modeldata.h"
+
+#include "eeprominterface.h"
+#include "generalsettings.h"
+#include "macros.h"
+#include "radiodataconversionstate.h"
+
+
+QString removeAccents(const QString & str)
+{
+  // UTF-8 ASCII Table
+  static const QHash<QString, QVariant> map = {
+    {"a", QRegularExpression("[áâãàä]")},
+    {"A", QRegularExpression("[ÁÂÃÀÄ]")},
+    {"e", QRegularExpression("[éèêě]")},
+    {"E", QRegularExpression("[ÉÈÊĚ]")},
+    {"o", QRegularExpression("[óôõö]")},
+    {"O", QRegularExpression("[ÓÔÕÖ]")},
+    {"u", QRegularExpression("[úü]")},
+    {"U", QRegularExpression("[ÚÜ]")},
+    {"i", "í"}, {"I", "Í"},
+    {"c", "ç"}, {"C", "Ç"},
+    {"y", "ý"}, {"Y", "Ý"},
+    {"s", "š"}, {"S", "Š"},
+    {"r", "ř"}, {"R", "Ř"}
+  };
+
+  QString result(str);
+  for (QHash<QString, QVariant>::const_iterator it = map.cbegin(), en = map.cend(); it != en; ++it) {
+    if (it.value().canConvert<QRegularExpression>())
+      result.replace(it.value().toRegularExpression(), it.key());
+    else
+      result.replace(it.value().toString(), it.key());
+  }
+  return result;
+}
+
+
+/*
+ * TimerData
+ */
+
+void TimerData::convert(RadioDataConversionState & cstate)
+{
+  cstate.setComponent(tr("TMR"), 1);
+  cstate.setSubComp(tr("Timer %1").arg(cstate.subCompIdx + 1));
+  mode.convert(cstate);
+}
+
+
+/*
+ * ModelData
+ */
+
+ModelData::ModelData()
+{
+  clear();
+}
+
+ModelData::ModelData(const ModelData & src)
+{
+  *this = src;
+}
+
+ModelData & ModelData::operator = (const ModelData & src)
+{
+  memcpy(reinterpret_cast<void *>(this), &src, sizeof(ModelData));
+  return *this;
+}
+
+ExpoData * ModelData::insertInput(const int idx)
+{
+  memmove(&expoData[idx+1], &expoData[idx], (CPN_MAX_EXPOS-(idx+1))*sizeof(ExpoData));
+  expoData[idx].clear();
+  return &expoData[idx];
+}
+
+bool ModelData::isInputValid(const unsigned int idx) const
+{
+  for (int i=0; i<CPN_MAX_EXPOS; i++) {
+    const ExpoData * expo = &expoData[i];
+    if (expo->mode == 0) break;
+    if (expo->chn == idx)
+      return true;
+  }
+  return false;
+}
+
+bool ModelData::hasExpos(uint8_t inputIdx) const
+{
+  for (int i=0; i<CPN_MAX_EXPOS; i++) {
+    const ExpoData & expo = expoData[i];
+    if (expo.chn==inputIdx && expo.mode!=0) {
+      return true;
+    }
+  }
+  return false;
+}
+
+bool ModelData::hasMixes(uint8_t channelIdx) const
+{
+  channelIdx += 1;
+  for (int i=0; i<CPN_MAX_MIXERS; i++) {
+    if (mixData[i].destCh == channelIdx) {
+      return true;
+    }
+  }
+  return false;
+}
+
+QVector<const ExpoData *> ModelData::expos(int input) const
+{
+  QVector<const ExpoData *> result;
+  for (int i=0; i<CPN_MAX_EXPOS; i++) {
+    const ExpoData * ed = &expoData[i];
+    if ((int)ed->chn==input && ed->mode!=0) {
+      result << ed;
+    }
+  }
+  return result;
+}
+
+QVector<const MixData *> ModelData::mixes(int channel) const
+{
+  QVector<const MixData *> result;
+  for (int i=0; i<CPN_MAX_MIXERS; i++) {
+    const MixData * md = &mixData[i];
+    if ((int)md->destCh == channel+1) {
+      result << md;
+    }
+  }
+  return result;
+}
+
+void ModelData::removeInput(const int idx, bool clearName)
+{
+  unsigned int chn = expoData[idx].chn;
+
+  memmove(&expoData[idx], &expoData[idx+1], (CPN_MAX_EXPOS-(idx+1))*sizeof(ExpoData));
+  expoData[CPN_MAX_EXPOS-1].clear();
+
+  //also remove input name if removing last line for this input
+  if (clearName && !expos(chn).size())
+    inputNames[chn][0] = 0;
+}
+
+void ModelData::clearInputs()
+{
+  for (int i=0; i<CPN_MAX_EXPOS; i++)
+    expoData[i].clear();
+
+  //clear all input names
+  if (getCurrentFirmware()->getCapability(VirtualInputs)) {
+    for (int i=0; i<CPN_MAX_INPUTS; i++) {
+      inputNames[i][0] = 0;
+    }
+  }
+}
+
+void ModelData::clearMixes()
+{
+  for (int i=0; i<CPN_MAX_MIXERS; i++)
+    mixData[i].clear();
+}
+
+void ModelData::clear()
+{
+  memset(reinterpret_cast<void *>(this), 0, sizeof(ModelData));
+  modelIndex = -1;  // an invalid index, this is managed by the TreeView data model
+  moduleData[0].protocol = PULSES_OFF;
+  moduleData[1].protocol = PULSES_OFF;
+  moduleData[0].channelsCount = 8;
+  moduleData[1].channelsStart = 0;
+  moduleData[1].channelsCount = 8;
+  moduleData[0].ppm.delay = 300;
+  moduleData[1].ppm.delay = 300;
+  moduleData[2].ppm.delay = 300; // Trainer PPM
+  for (int i=0; i<CPN_MAX_FLIGHT_MODES; i++) {
+    flightModeData[i].clear(i);
+  }
+  for (int i=0; i<CPN_MAX_GVARS; i++) {
+    gvarData[i].clear();
+  }
+  clearInputs();
+  clearMixes();
+  for (int i=0; i<CPN_MAX_CHNOUT; i++)
+    limitData[i].clear();
+  for (int i=0; i<CPN_MAX_STICKS; i++)
+    expoData[i].clear();
+  for (int i=0; i<CPN_MAX_LOGICAL_SWITCHES; i++)
+    logicalSw[i].clear();
+  for (int i=0; i<CPN_MAX_SPECIAL_FUNCTIONS; i++)
+    customFn[i].clear();
+  for (int i=0; i<CPN_MAX_CURVES; i++)
+    curves[i].clear(5);
+  for (int i=0; i<CPN_MAX_TIMERS; i++)
+    timers[i].clear();
+  swashRingData.clear();
+  frsky.clear();
+  rssiAlarms.clear();
+  for (int i=0; i<CPN_MAX_SENSORS; i++)
+    sensorData[i].clear();
+
+  static const uint8_t blob[] = { 0x4c, 0x61, 0x79, 0x6f, 0x75, 0x74, 0x32, 0x50, 0x31, 0x00, 0x4d, 0x6f, 0x64, 0x65, 0x6c, 0x42, 0x6d, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+  memcpy(customScreenData[0], blob, sizeof(blob));
+}
+
+bool ModelData::isEmpty() const
+{
+  return !used;
+}
+
+void ModelData::setDefaultInputs(const GeneralSettings & settings)
+{
+  Board::Type board = getCurrentBoard();
+  if (IS_ARM(board)) {
+    for (int i=0; i<CPN_MAX_STICKS; i++) {
+      ExpoData * expo = &expoData[i];
+      expo->chn = i;
+      expo->mode = INPUT_MODE_BOTH;
+      expo->srcRaw = settings.getDefaultSource(i);
+      expo->weight = 100;
+      strncpy(inputNames[i], removeAccents(expo->srcRaw.toString(this)).toLatin1().constData(), sizeof(inputNames[i])-1);
+    }
+  }
+}
+
+void ModelData::setDefaultMixes(const GeneralSettings & settings)
+{
+  Board::Type board = getCurrentBoard();
+  if (IS_ARM(board)) {
+    setDefaultInputs(settings);
+  }
+
+  for (int i=0; i<CPN_MAX_STICKS; i++) {
+    MixData * mix = &mixData[i];
+    mix->destCh = i+1;
+    mix->weight = 100;
+    if (IS_ARM(board)) {
+      mix->srcRaw = RawSource(SOURCE_TYPE_VIRTUAL_INPUT, i);
+    }
+    else {
+      mix->srcRaw = RawSource(SOURCE_TYPE_STICK, i);
+    }
+  }
+}
+
+void ModelData::setDefaultValues(unsigned int id, const GeneralSettings & settings)
+{
+  clear();
+  used = true;
+  sprintf(name, "MODEL%02d", id+1);
+  for (int i=0; i<CPN_MAX_MODULES; i++) {
+    moduleData[i].modelId = id+1;
+  }
+  setDefaultMixes(settings);
+}
+
+int ModelData::getTrimValue(int phaseIdx, int trimIdx)
+{
+  int result = 0;
+  for (int i=0; i<CPN_MAX_FLIGHT_MODES; i++) {
+    FlightModeData & phase = flightModeData[phaseIdx];
+    if (phase.trimMode[trimIdx] < 0) {
+      return result;
+    }
+    else {
+      if (phase.trimRef[trimIdx] == phaseIdx || phaseIdx == 0) {
+        return result + phase.trim[trimIdx];
+      }
+      else {
+        phaseIdx = phase.trimRef[trimIdx];
+        if (phase.trimMode[trimIdx] != 0)
+          result += phase.trim[trimIdx];
+      }
+    }
+  }
+  return 0;
+}
+
+bool ModelData::isGVarLinked(int phaseIdx, int gvarIdx)
+{
+  return flightModeData[phaseIdx].gvars[gvarIdx] > 1024;
+}
+
+int ModelData::getGVarFieldValue(int phaseIdx, int gvarIdx)
+{
+  int idx = flightModeData[phaseIdx].gvars[gvarIdx];
+  for (int i=0; idx>GVAR_MAX_VALUE && i<CPN_MAX_FLIGHT_MODES; i++) {
+    int nextPhase = idx - GVAR_MAX_VALUE - 1;
+    if (nextPhase >= phaseIdx) nextPhase += 1;
+    phaseIdx = nextPhase;
+    idx = flightModeData[phaseIdx].gvars[gvarIdx];
+  }
+  return idx;
+}
+
+void ModelData::setTrimValue(int phaseIdx, int trimIdx, int value)
+{
+  for (uint8_t i=0; i<CPN_MAX_FLIGHT_MODES; i++) {
+    FlightModeData & phase = flightModeData[phaseIdx];
+    int mode = phase.trimMode[trimIdx];
+    int p = phase.trimRef[trimIdx];
+    int & trim = phase.trim[trimIdx];
+    if (mode < 0)
+      return;
+    if (p == phaseIdx || phaseIdx == 0) {
+      trim = value;
+      break;;
+    }
+    else if (mode == 0) {
+      phaseIdx = p;
+    }
+    else {
+      trim = value - getTrimValue(p, trimIdx);
+      if (trim < -500)
+        trim = -500;
+      if (trim > 500)
+        trim = 500;
+      break;
+    }
+  }
+}
+
+void ModelData::removeGlobalVar(int & var)
+{
+  if (var >= 126 && var <= 130)
+    var = flightModeData[0].gvars[var-126];
+  else if (var <= -126 && var >= -130)
+    var = - flightModeData[0].gvars[-126-var];
+}
+
+ModelData ModelData::removeGlobalVars()
+{
+  ModelData result = *this;
+
+  for (int i=0; i<CPN_MAX_MIXERS; i++) {
+    removeGlobalVar(mixData[i].weight);
+    removeGlobalVar(mixData[i].curve.value);
+    removeGlobalVar(mixData[i].sOffset);
+  }
+
+  for (int i=0; i<CPN_MAX_EXPOS; i++) {
+    removeGlobalVar(expoData[i].weight);
+    removeGlobalVar(expoData[i].curve.value);
+  }
+
+  return result;
+}
+
+int ModelData::getChannelsMax(bool forceExtendedLimits) const
+{
+  if (forceExtendedLimits || extendedLimits)
+    return IS_HORUS_OR_TARANIS(getCurrentBoard()) ? 150 : 125;
+  else
+    return 100;
+}
+
+bool ModelData::isAvailable(const RawSwitch & swtch) const
+{
+  unsigned index = abs(swtch.index) - 1;
+
+  if (swtch.type == SWITCH_TYPE_VIRTUAL) {
+    return logicalSw[index].func != LS_FN_OFF;
+  }
+  else if (swtch.type == SWITCH_TYPE_FLIGHT_MODE) {
+    return index == 0 || flightModeData[index].swtch.type != SWITCH_TYPE_NONE;
+  }
+  else if (swtch.type == SWITCH_TYPE_SENSOR) {
+    return strlen(sensorData[index].label) > 0;
+  }
+  else {
+    return true;
+  }
+}
+
+float ModelData::getGVarFieldValuePrec(int phaseIdx, int gvarIdx)
+{
+  return getGVarFieldValue(phaseIdx, gvarIdx) * gvarData[gvarIdx].multiplierGet();
+}
+
+void ModelData::convert(RadioDataConversionState & cstate)
+{
+  // Here we can add explicit conversions when moving from one board to another
+
+  QString origin = QString(name);
+  if (origin.isEmpty())
+    origin = QString::number(cstate.modelIdx+1);
+  cstate.setOrigin(tr("Model: ") % origin);
+
+  cstate.setComponent("SET", 0);
+  if (thrTraceSrc && (int)thrTraceSrc < cstate.fromBoard.getCapability(Board::Pots) + cstate.fromBoard.getCapability(Board::Sliders)) {
+    cstate.setSubComp(tr("Throttle Source"));
+    thrTraceSrc = RawSource(SOURCE_TYPE_STICK, (int)thrTraceSrc + 3).convert(cstate).index - 3;
+  }
+
+  for (int i=0; i<CPN_MAX_TIMERS; i++) {
+    timers[i].convert(cstate.withComponentIndex(i));
+  }
+
+  for (int i=0; i<CPN_MAX_MIXERS; i++) {
+    mixData[i].convert(cstate.withComponentIndex(i));
+  }
+
+  for (int i=0; i<CPN_MAX_EXPOS; i++) {
+    expoData[i].convert(cstate.withComponentIndex(i));
+  }
+
+  for (int i=0; i<CPN_MAX_LOGICAL_SWITCHES; i++) {
+    logicalSw[i].convert(cstate.withComponentIndex(i));
+  }
+
+  for (int i=0; i<CPN_MAX_SPECIAL_FUNCTIONS; i++) {
+    customFn[i].convert(cstate.withComponentIndex(i));
+  }
+
+  for (int i=0; i<CPN_MAX_FLIGHT_MODES; i++) {
+    flightModeData[i].convert(cstate.withComponentIndex(i));
+  }
+
+  for (int i=0; i<CPN_MAX_MODULES; i++) {
+    moduleData[i].convert(cstate.withComponentIndex(i));
+  }
+}

companion/src/firmwares/modeldata.h

@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MODELDATA_H
+#define MODELDATA_H
+
+#include "constants.h"
+#include "customfunctiondata.h"
+#include "gvardata.h"
+#include "io_data.h"
+#include "logicalswitchdata.h"
+#include "moduledata.h"
+#include "sensordata.h"
+#include "telem_data.h"
+
+#include <QtCore>
+
+class GeneralSettings;
+class RadioDataConversionState;
+
+#define CHAR_FOR_NAMES " ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789_-."
+#define CHAR_FOR_NAMES_REGEX "[ A-Za-z0-9_.-,]*"
+
+class RSSIAlarmData {
+  public:
+    RSSIAlarmData() { clear(); }
+    unsigned int level[2];  // AVR Only
+    int warning;
+    int critical;
+    bool disabled;
+    void clear() {
+      this->level[0] = 2;
+      this->level[1] = 3;
+      this->warning = 45;
+      this->critical = 42;
+      this->disabled = false;
+    }
+};
+
+#define TIMER_NAME_LEN 8
+
+class TimerData {
+  Q_DECLARE_TR_FUNCTIONS(TimerData)
+
+  public:
+    enum CountDownMode {
+      COUNTDOWN_SILENT,
+      COUNTDOWN_BEEPS,
+      COUNTDOWN_VOICE,
+      COUNTDOWN_HAPTIC
+    };
+    TimerData() { clear(); }
+    RawSwitch    mode;
+    char         name[TIMER_NAME_LEN+1];
+    bool         minuteBeep;
+    unsigned int countdownBeep;
+    unsigned int val;
+    unsigned int persistent;
+    int          pvalue;
+    void clear() { memset(reinterpret_cast<void *>(this), 0, sizeof(TimerData)); mode = RawSwitch(SWITCH_TYPE_TIMER_MODE, 0); }
+    void convert(RadioDataConversionState & cstate);
+};
+
+#define CPN_MAX_SCRIPTS       9
+#define CPN_MAX_SCRIPT_INPUTS 10
+class ScriptData {
+  public:
+    ScriptData() { clear(); }
+    char    filename[10+1];
+    char    name[10+1];
+    int     inputs[CPN_MAX_SCRIPT_INPUTS];
+    void clear() { memset(reinterpret_cast<void *>(this), 0, sizeof(ScriptData)); }
+};
+
+/*
+ * TODO ...
+ */
+#if 0
+class CustomScreenOptionData {
+  public:
+
+};
+
+class CustomScreenZoneData {
+  public:
+    char widgetName[10+1];
+    WidgetOptionData widgetOptions[5];
+};
+
+class CustomScreenData {
+  public:
+    CustomScreenData();
+
+    char layoutName[10+1];
+    CustomScreenZoneData zones[];
+    CustomScreenOptionData options[];
+};
+#else
+typedef char CustomScreenData[610+1];
+typedef char TopbarData[216+1];
+#endif
+
+enum TrainerMode {
+  TRAINER_MODE_MASTER_TRAINER_JACK,
+  TRAINER_MODE_SLAVE,
+  TRAINER_MODE_MASTER_SBUS_EXTERNAL_MODULE,
+  TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE,
+  TRAINER_MODE_MASTER_BATTERY_COMPARTMENT,
+};
+
+class ModelData {
+  Q_DECLARE_TR_FUNCTIONS(ModelData)
+
+  public:
+    ModelData();
+    ModelData(const ModelData & src);
+    ModelData & operator = (const ModelData & src);
+
+    void convert(RadioDataConversionState & cstate);
+
+    ExpoData * insertInput(const int idx);
+    void removeInput(const int idx, bool clearName = true);
+
+    bool isInputValid(const unsigned int idx) const;
+    bool hasExpos(uint8_t inputIdx) const;
+    bool hasMixes(uint8_t output) const;
+
+    QVector<const ExpoData *> expos(int input) const;
+    QVector<const MixData *> mixes(int channel) const;
+
+    bool      used;
+    int       category;
+    char      name[15+1];
+    char      filename[16+1];
+    int       modelIndex;      // Companion only, temporary index position managed by data model.
+
+    TimerData timers[CPN_MAX_TIMERS];
+    bool      noGlobalFunctions;
+    bool      thrTrim;            // Enable Throttle Trim
+    int       trimInc;            // Trim Increments
+    unsigned int trimsDisplay;
+    bool      disableThrottleWarning;
+
+    unsigned int beepANACenter;      // 1<<0->A1.. 1<<6->A7
+
+    bool      extendedLimits; // TODO xml
+    bool      extendedTrims;
+    bool      throttleReversed;
+    FlightModeData flightModeData[CPN_MAX_FLIGHT_MODES];
+    MixData   mixData[CPN_MAX_MIXERS];
+    LimitData limitData[CPN_MAX_CHNOUT];
+
+    char      inputNames[CPN_MAX_INPUTS][4+1];
+    ExpoData  expoData[CPN_MAX_EXPOS];
+
+    CurveData curves[CPN_MAX_CURVES];
+    LogicalSwitchData  logicalSw[CPN_MAX_LOGICAL_SWITCHES];
+    CustomFunctionData customFn[CPN_MAX_SPECIAL_FUNCTIONS];
+    SwashRingData swashRingData;
+    unsigned int thrTraceSrc;
+    uint64_t switchWarningStates;
+    unsigned int switchWarningEnable;
+    unsigned int potsWarningMode;
+    bool potsWarningEnabled[CPN_MAX_POTS];
+    int          potPosition[CPN_MAX_POTS];
+    bool         displayChecklist;
+    GVarData gvarData[CPN_MAX_GVARS];
+    MavlinkData mavlink;
+    unsigned int telemetryProtocol;
+    FrSkyData frsky;
+    RSSIAlarmData rssiAlarms;
+
+    char bitmap[10+1];
+
+    unsigned int trainerMode;  // TrainerMode
+
+    ModuleData moduleData[CPN_MAX_MODULES+1/*trainer*/];
+
+    ScriptData scriptData[CPN_MAX_SCRIPTS];
+
+    SensorData sensorData[CPN_MAX_SENSORS];
+
+    unsigned int toplcdTimer;
+
+    CustomScreenData customScreenData[5];
+
+    TopbarData topbarData;
+
+    void clear();
+    bool isEmpty() const;
+    void setDefaultInputs(const GeneralSettings & settings);
+    void setDefaultMixes(const GeneralSettings & settings);
+    void setDefaultValues(unsigned int id, const GeneralSettings & settings);
+
+    int getTrimValue(int phaseIdx, int trimIdx);
+    void setTrimValue(int phaseIdx, int trimIdx, int value);
+
+    bool isGVarLinked(int phaseIdx, int gvarIdx);
+    int getGVarFieldValue(int phaseIdx, int gvarIdx);
+    float getGVarFieldValuePrec(int phaseIdx, int gvarIdx);
+
+    ModelData removeGlobalVars();
+
+    void clearMixes();
+    void clearInputs();
+
+    int getChannelsMax(bool forceExtendedLimits=false) const;
+
+    bool isAvailable(const RawSwitch & swtch) const;
+
+  protected:
+    void removeGlobalVar(int & var);
+};
+
+#endif // MODELDATA_H

companion/src/firmwares/moduledata.cpp

@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "moduledata.h"
+#include "eeprominterface.h"
+#include "multiprotocols.h"
+#include "radiodataconversionstate.h"
+
+void ModuleData::convert(RadioDataConversionState & cstate)
+{
+  if (protocol == PULSES_PXX_R9M && (IS_TARANIS_XLITE(cstate.fromType) || IS_TARANIS_XLITE(cstate.toType))) {
+    clear();
+  }
+}
+
+QString ModuleData::rfProtocolToString() const
+{
+  switch (protocol) {
+    case PULSES_MULTIMODULE:
+      return Multiprotocols::protocolToString((int)multi.rfProtocol, multi.customProto);
+
+    default:
+      return CPN_STR_UNKNOWN_ITEM;
+  }
+}
+
+QString ModuleData::subTypeToString(int type) const
+{
+  static const char * strings[] = {
+    "FCC",
+    "EU",
+    "868MHz",
+    "915MHz"
+  };
+
+  if (type < 0)
+    type = subType;
+
+  switch (protocol) {
+    case PULSES_MULTIMODULE:
+      return Multiprotocols::subTypeToString(multi.customProto ? MM_RF_CUSTOM_SELECTED : (int)multi.rfProtocol, (unsigned)type);
+
+    case PULSES_PXX_R9M:
+      return CHECK_IN_ARRAY(strings, type);
+
+    default:
+      return CPN_STR_UNKNOWN_ITEM;
+  }
+}
+
+QString ModuleData::powerValueToString(Firmware * fw) const
+{
+  const QStringList & strRef = powerValueStrings(subType, fw);
+  // EU module with telemetry can only be < 100/200mW.
+  if (pxx.sport_out && subType == MODULE_SUBTYPE_R9M_EU && pxx.power > 1)
+    return CPN_STR_UNKNOWN_ITEM;
+
+  return strRef.value(pxx.power, CPN_STR_UNKNOWN_ITEM);
+}
+
+// static
+QString ModuleData::indexToString(int index, Firmware * fw)
+{
+  if (index < 0)
+    return tr("Trainer Port");
+
+  if (fw->getCapability(NumModules) > 1) {
+    if (IS_HORUS_OR_TARANIS(fw->getBoard()))
+      return index == 0 ? tr("Internal Radio System") : tr("External Radio Module");
+    if (index > 0)
+      return tr("Extra Radio System");
+  }
+  return tr("Radio System");
+}
+
+// static
+QString ModuleData::protocolToString(unsigned protocol)
+{
+  static const char * strings[] = {
+    "OFF",
+    "PPM",
+    "Silverlit A", "Silverlit B", "Silverlit C",
+    "CTP1009",
+    "LP45", "DSM2", "DSMX",
+    "PPM16", "PPMsim",
+    "FrSky XJT (D16)", "FrSky XJT (D8)", "FrSky XJT (LR12)", "FrSky DJT",
+    "Crossfire",
+    "DIY Multiprotocol Module",
+    "FrSky R9M Module",
+    "SBUS output at VBat"
+  };
+
+  return CHECK_IN_ARRAY(strings, protocol);
+}
+
+// static
+QStringList ModuleData::powerValueStrings(int subType, Firmware * fw)
+{
+  static const QStringList strings[] = {
+    { tr("10mW - 16CH"), tr("100mW - 16CH"), tr("500mW - 16CH"), tr("Auto <= 1W - 16CH") },                         // full-size FCC
+    { tr("25mW - 8CH"), tr("25mW - 16CH"), tr("200mW - 16CH (no telemetry)"), tr("500mW - 16CH (no telemetry)") },  // full-size EU
+    { tr("100mW - 16CH") },                                                                                         // mini FCC
+    { tr("25mW - 8CH"), tr("25mW - 16CH"), tr("100mW - 16CH (no telemetry)") }                                      // mini EU
+  };
+  int strIdx = 0;
+  if (subType == MODULE_SUBTYPE_R9M_EU)
+    strIdx += 1;
+  if (fw->getCapability(HasModuleR9MMini))
+    strIdx += 2;
+  return strings[strIdx];
+}

companion/src/firmwares/moduledata.h

@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MODULEDATA_H
+#define MODULEDATA_H
+
+#include "constants.h"
+
+#include <QtCore>
+
+class Firmware;
+class RadioDataConversionState;
+
+enum PulsesProtocol {
+  PULSES_OFF,
+  PULSES_PPM,
+  PULSES_SILV_A,
+  PULSES_SILV_B,
+  PULSES_SILV_C,
+  PULSES_CTP1009,
+  PULSES_LP45,
+  PULSES_DSM2,
+  PULSES_DSMX,
+  PULSES_PPM16,
+  PULSES_PPMSIM,
+  PULSES_PXX_XJT_X16,
+  PULSES_PXX_XJT_D8,
+  PULSES_PXX_XJT_LR12,
+  PULSES_PXX_DJT,
+  PULSES_CROSSFIRE,
+  PULSES_MULTIMODULE,
+  PULSES_PXX_R9M,
+  PULSES_SBUS,
+  PULSES_PROTOCOL_LAST
+};
+
+enum MultiModuleRFProtocols {
+  MM_RF_PROTO_FLYSKY=0,
+  MM_RF_PROTO_FIRST=MM_RF_PROTO_FLYSKY,
+  MM_RF_PROTO_HUBSAN,
+  MM_RF_PROTO_FRSKY,
+  MM_RF_PROTO_HISKY,
+  MM_RF_PROTO_V2X2,
+  MM_RF_PROTO_DSM2,
+  MM_RF_PROTO_DEVO,
+  MM_RF_PROTO_YD717,
+  MM_RF_PROTO_KN,
+  MM_RF_PROTO_SYMAX,
+  MM_RF_PROTO_SLT,
+  MM_RF_PROTO_CX10,
+  MM_RF_PROTO_CG023,
+  MM_RF_PROTO_BAYANG,
+  MM_RF_PROTO_ESky,
+  MM_RF_PROTO_MT99XX,
+  MM_RF_PROTO_MJXQ,
+  MM_RF_PROTO_SHENQI,
+  MM_RF_PROTO_FY326,
+  MM_RF_PROTO_SFHSS,
+  MM_RF_PROTO_J6PRO,
+  MM_RF_PROTO_FQ777,
+  MM_RF_PROTO_ASSAN,
+  MM_RF_PROTO_HONTAI,
+  MM_RF_PROTO_OLRS,
+  MM_RF_PROTO_FS_AFHDS2A,
+  MM_RF_PROTO_Q2X2,
+  MM_RF_PROTO_WK_2X01,
+  MM_RF_PROTO_Q303,
+  MM_RF_PROTO_GW008,
+  MM_RF_PROTO_DM002,
+  MM_RF_PROTO_CABELL,
+  MM_RF_PROTO_ESKY150,
+  MM_RF_PROTO_H83D,
+  MM_RF_PROTO_CORONA,
+  MM_RF_PROTO_CFLIE,
+  MM_RF_PROTO_HITEC,
+  MM_RF_PROTO_WFLY,
+  MM_RF_PROTO_BUGS,
+  MM_RF_PROTO_BUGS_MINI,
+  MM_RF_PROTO_TRAXXAS,
+  MM_RF_PROTO_NCC1701,
+  MM_RF_PROTO_E01X,
+  MM_RF_PROTO_V911S,
+  MM_RF_PROTO_GD00X,
+  MM_RF_PROTO_LAST = MM_RF_PROTO_GD00X
+};
+
+enum TrainerProtocol {
+  TRAINER_MASTER_JACK,
+  TRAINER_SLAVE_JACK,
+  TRAINER_MASTER_SBUS_MODULE,
+  TRAINER_MASTER_CPPM_MODULE,
+  TRAINER_MASTER_SBUS_BATT_COMPARTMENT
+};
+
+enum R9MSubTypes {
+  MODULE_SUBTYPE_R9M_FCC,
+  MODULE_SUBTYPE_R9M_EU,
+  MODULE_SUBTYPE_R9M_EUPLUS,
+  MODULE_SUBTYPE_R9M_AUPLUS,
+  MODULE_SUBTYPE_R9M_LAST=MODULE_SUBTYPE_R9M_AUPLUS
+};
+
+class ModuleData {
+  Q_DECLARE_TR_FUNCTIONS(ModuleData)
+
+  public:
+    ModuleData() { clear(); }
+    unsigned int modelId;
+    int          protocol;
+    unsigned int subType;
+    bool         invertedSerial;
+    unsigned int channelsStart;
+    int          channelsCount; // 0=8 channels
+    unsigned int failsafeMode;
+    int          failsafeChannels[CPN_MAX_CHNOUT];
+
+
+    struct {
+      int delay;
+      bool pulsePol;           // false = positive
+      bool outputType;         // false = open drain, true = push pull
+      int frameLength;
+    } ppm;
+
+    struct {
+      unsigned int rfProtocol;
+      bool autoBindMode;
+      bool lowPowerMode;
+      bool customProto;
+      int optionValue;
+    } multi;
+
+    struct {
+      int power;                   // 0 10 mW, 1 100 mW, 2 500 mW, 3 1W
+      bool receiver_telem_off;     // false = receiver telem enabled
+      bool receiver_channel_9_16;  // false = pwm out 1-8, true 9-16
+      bool external_antenna;       // false = internal antenna, true = external antenna
+      bool sport_out;
+    } pxx;
+
+
+    void clear() { memset(this, 0, sizeof(ModuleData)); }
+    void convert(RadioDataConversionState & cstate);
+    QString polarityToString() const { return ppm.pulsePol ? tr("Positive") : tr("Negative"); }
+    QString rfProtocolToString() const;
+    QString subTypeToString(int type = -1) const;
+    QString powerValueToString(Firmware * fw) const;
+    static QString indexToString(int index, Firmware * fw);
+    static QString protocolToString(unsigned protocol);
+    static QStringList powerValueStrings(int subType, Firmware * fw);
+};
+
+#endif // MODULEDATA_H

companion/src/firmwares/multiprotocols.cpp

@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) OpenTX
+ *
+ * Based on code named
+ *   th9x - http://code.google.com/p/th9x
+ *   er9x - http://code.google.com/p/er9x
+ *   gruvin9x - http://code.google.com/p/gruvin9x
+ *
+ * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <QObject>
+
+#include "multiprotocols.h"
+#include "radiodata.h"
+
+#define STR_MULTI_SUBTYPE                    QT_TRANSLATE_NOOP("Multiprotocols", "Subtype")
+#define STR_MULTI_VIDFREQ                    QT_TRANSLATE_NOOP("Multiprotocols", "Video TX frequency")
+#define STR_MULTI_RFTUNE                     QT_TRANSLATE_NOOP("Multiprotocols", "CC2500 frequency fine tune")
+#define STR_MULTI_TELEMETRY                  QT_TRANSLATE_NOOP("Multiprotocols", "Telemetry")
+#define STR_MULTI_RFPOWER                    QT_TRANSLATE_NOOP("Multiprotocols", "Radio output power")
+#define STR_MULTI_SERVOFREQ                  QT_TRANSLATE_NOOP("Multiprotocols", "Servo output frequency")
+#define STR_MULTI_OPTION                     QT_TRANSLATE_NOOP("Multiprotocols", "Option value")
+#define STR_MULTI_DEFAULT                    QT_TRANSLATE_NOOP("Multiprotocols", "DEFAULT")
+
+static const QStringList STR_SUBTYPE_CUSTOM  ({
+                                                STR_MULTI_SUBTYPE " 0", STR_MULTI_SUBTYPE " 1", STR_MULTI_SUBTYPE " 2", STR_MULTI_SUBTYPE " 3",
+                                                STR_MULTI_SUBTYPE " 4", STR_MULTI_SUBTYPE " 5", STR_MULTI_SUBTYPE " 6", STR_MULTI_SUBTYPE " 7"
+                                              });
+static const QStringList STR_SUBTYPE_FLYSKY  {"Standard", "V9x9", "V6x6", "V912", "CX20"};
+static const QStringList STR_SUBTYPE_HUBSAN  {"H107", "H301", "H501"};
+static const QStringList STR_SUBTYPE_FRSKY   {"D16", "D8", "D16 8ch", "V8", "D16 EU-LBT", "D16 EU-LBT 8ch"};
+static const QStringList STR_SUBTYPE_HISKY   {"Standard", "HK310"};
+static const QStringList STR_SUBTYPE_V2X2    {"Standard", "JXD506"};
+static const QStringList STR_SUBTYPE_DSM     {"DSM2 22ms", "DSM2 11ms", "DSMX 22ms", "DSMX 11ms"};
+static const QStringList STR_SUBTYPE_YD717   {"Standard", "Skywalker", "Syma X4", "XINXUN", "NIHUI"};
+static const QStringList STR_SUBTYPE_KN      {"WLtoys", "FeiLun"};
+static const QStringList STR_SUBTYPE_SYMAX   {"Standard", "Syma X5C"};
+static const QStringList STR_SUBTYPE_SLT     {"V1 (6 Channel)", "V2 (8 Channel)", "Q100", "Q200", "MR100"};
+static const QStringList STR_SUBTYPE_CX10    {"Green", "Blue", "DM007", "-", "JC3015a", "JC3015b", "MK33041"};
+static const QStringList STR_SUBTYPE_CG023   {"Standard", "YD829"};
+static const QStringList STR_SUBTYPE_BAYANG  {"Standard", "H8S3D", "X16 AH", "IRDRONE"};
+static const QStringList STR_SUBTYPE_MT99    {"MT99", "H7", "YZ", "LS", "FY805"};
+static const QStringList STR_SUBTYPE_MJXQ    {"WLH08", "X600", "X800", "H26D", "E010", "H26WH"};
+static const QStringList STR_SUBTYPE_FY326   {"Standard", "FY319"};
+static const QStringList STR_SUBTYPE_HONTAI  {"Standard", "JJRC X1", "X5C1 Clone", "FQ777_951"};
+static const QStringList STR_SUBTYPE_AFHDS2A {"PWM and IBUS", "PPM and IBUS", "PWM and SBUS", "PPM and SBUS"};
+static const QStringList STR_SUBTYPE_Q2X2    {"Q222", "Q242", "Q282"};
+static const QStringList STR_SUBTYPE_WK2x01  {"WK2801", "WK2401", "W6_5_1", "W6_6_1", "W6_HEL", "W6_HEL_I"};
+static const QStringList STR_SUBTYPE_Q303    {"Standard", "CX35", "CX10D", "CX10WD"};
+static const QStringList STR_SUBTYPE_CABELL  {"Cabell V3", "Cab V3 Telem", "-", "-", "-", "-", "Set FailSafe", "Unbind"};
+static const QStringList STR_SUBTYPE_H83D    {"H8 Mini 3D", "H20H", "H20 Mini", "H30 Mini"};
+static const QStringList STR_SUBTYPE_CORONA  {"V1", "V2", "Flydream V3"};
+static const QStringList STR_SUBTYPE_HITEC 	 {"Optima", "Optima Hub Telem", "Minima"};
+static const QStringList STR_SUBTYPE_E01X    {"E012", "E015"};
+
+static const QStringList NO_SUBTYPE          {STR_MULTI_DEFAULT};
+
+
+// Table is designed to be shared with gui_common_arm.cpp
+
+const Multiprotocols multiProtocols {
+  {MM_RF_PROTO_FLYSKY,     4, false,      STR_SUBTYPE_FLYSKY,  nullptr},
+  {MM_RF_PROTO_HUBSAN,     2, false,      STR_SUBTYPE_HUBSAN,  STR_MULTI_VIDFREQ},
+  {MM_RF_PROTO_FRSKY,      5, false,      STR_SUBTYPE_FRSKY,   STR_MULTI_RFTUNE},
+  {MM_RF_PROTO_HISKY,      1, false,      STR_SUBTYPE_HISKY,   nullptr},
+  {MM_RF_PROTO_V2X2,       1, false,      STR_SUBTYPE_V2X2,    nullptr},
+  {MM_RF_PROTO_DSM2,       3, false,      STR_SUBTYPE_DSM,     nullptr},
+  {MM_RF_PROTO_YD717,      4, false,      STR_SUBTYPE_YD717,   nullptr},
+  {MM_RF_PROTO_KN,         1, false,      STR_SUBTYPE_KN,      nullptr},
+  {MM_RF_PROTO_SYMAX,      1, false,      STR_SUBTYPE_SYMAX,   nullptr},
+  {MM_RF_PROTO_SLT,        4, false,      STR_SUBTYPE_SLT,     nullptr},
+  {MM_RF_PROTO_CX10,       6, false,      STR_SUBTYPE_CX10,    nullptr},
+  {MM_RF_PROTO_CG023,      1, false,      STR_SUBTYPE_CG023,   nullptr},
+  {MM_RF_PROTO_BAYANG,     3, false,      STR_SUBTYPE_BAYANG,  STR_MULTI_TELEMETRY},
+  {MM_RF_PROTO_MT99XX,     4, false,      STR_SUBTYPE_MT99,    nullptr},
+  {MM_RF_PROTO_MJXQ,       5, false,      STR_SUBTYPE_MJXQ,    nullptr},
+  {MM_RF_PROTO_FY326,      1, false,      STR_SUBTYPE_FY326,   nullptr},
+  {MM_RF_PROTO_SFHSS,      0, true,       NO_SUBTYPE,          STR_MULTI_RFTUNE},
+  {MM_RF_PROTO_HONTAI,     3, false,      STR_SUBTYPE_HONTAI,  nullptr},
+  {MM_RF_PROTO_OLRS,       0, false,      NO_SUBTYPE,          STR_MULTI_RFPOWER},
+  {MM_RF_PROTO_FS_AFHDS2A, 3, true,       STR_SUBTYPE_AFHDS2A, STR_MULTI_SERVOFREQ},
+  {MM_RF_PROTO_Q2X2,       2, false,      STR_SUBTYPE_Q2X2,    nullptr},
+  {MM_RF_PROTO_WK_2X01,    5, false,      STR_SUBTYPE_WK2x01,  nullptr},
+  {MM_RF_PROTO_Q303,       3, false,      STR_SUBTYPE_Q303,    nullptr},
+  {MM_RF_PROTO_CABELL,     7, false,      STR_SUBTYPE_CABELL,  STR_MULTI_OPTION},
+  {MM_RF_PROTO_H83D,       3, false,      STR_SUBTYPE_H83D,    nullptr},
+  {MM_RF_PROTO_CORONA,     2, false,      STR_SUBTYPE_CORONA,  STR_MULTI_RFTUNE},
+  {MM_RF_PROTO_HITEC,      2, false,      STR_SUBTYPE_HITEC,   STR_MULTI_RFTUNE},
+  {MM_RF_PROTO_E01X,       1, false,      STR_SUBTYPE_E01X,    nullptr},
+  {MM_RF_CUSTOM_SELECTED,  7, true,       STR_SUBTYPE_CUSTOM,  STR_MULTI_OPTION},
+
+  // Sentinel and default for protocols not listed above (MM_RF_CUSTOM is 0xff)
+  { 0xfe,                  0, false,      NO_SUBTYPE,           nullptr}
+};
+
+int Multiprotocols::MultiProtocolDefinition::getOptionMin() const {
+  if (optionsstr == STR_MULTI_RFPOWER)
+    return -1;
+  else if (optionsstr == STR_MULTI_SERVOFREQ)
+    return 0;
+  else
+    return -128;
+}
+
+int Multiprotocols::MultiProtocolDefinition::getOptionMax() const {
+  if (optionsstr == STR_MULTI_RFPOWER)
+    return 7;
+  else if (optionsstr == STR_MULTI_SERVOFREQ)
+    return 70;
+  else
+    return 127;
+}
+
+const Multiprotocols::MultiProtocolDefinition & Multiprotocols::getProtocol(int protocol) const {
+  for (const Multiprotocols::MultiProtocolDefinition & proto: protocols)
+    if (proto.protocol == protocol)
+      return proto;
+
+  // Protocol not found, return the default (last) proto
+  Q_ASSERT(protocols.rbegin()->protocol == 0xfe);
+  return *protocols.rbegin();
+}
+
+// static
+QString Multiprotocols::protocolToString(int protocol, bool custom)
+{
+  static const QStringList strings({
+    "FlySky", "Hubsan", "FrSky", "Hisky", "V2x2", "DSM", "Devo", "YD717", "KN", "SymaX", "SLT", "CX10", "CG023",
+    "Bayang", "ESky", "MT99XX", "MJXQ", "Shenqi", "FY326", "SFHSS", "J6 PRO","FQ777","Assan","Hontai","Open LRS",
+    "FlySky AFHDS2A", "Q2x2", "Walkera", "Q303", "GW008", "DM002", "Cabell", "ESky 150", "H8 3D", "Corona", "CFlie",
+	"Hitec", "Wfly", "Bugs", "Bugs Mini", "Traxxas", "NCC-1701-A", "E01X", "V911S", "GD00X"
+  });
+
+  if (protocol == MM_RF_CUSTOM_SELECTED || custom)
+    return tr("Custom - proto %1)").arg(protocol);
+  else
+    return strings.value(protocol, CPN_STR_UNKNOWN_ITEM);
+}
+
+// static
+QString Multiprotocols::subTypeToString(int protocol, unsigned subType)
+{
+  return tr(qPrintable(multiProtocols.getProtocol(protocol).subTypeStrings.value(subType, CPN_STR_UNKNOWN_ITEM)));
+}